Regulation 12, The Uttar Pradesh Technical Education (Committees and Sub-Committees, Association of Institutions) Regulations, 2000: (1) Inspection and Affiliation Committee shall consist of
The Uttar Pradesh Technical Education (Committees and Sub-Committees, Association of Institutions) Regulations, 2000 - Regulation 12
Text of regulation 12
(1) Inspection and Affiliation Committee shall consist of
12. (1) Inspection and Affiliation Committee shall consist of:-
1. Director, Chairman
Institute of Research, Development and Training,
Kanpur.
2. Joint Director, member
Technical Education of Concerned zone
3. Four Experts of member
Engineering and Technology.
4 Regional Officer, member
All India Council of Technical Education,
Kanpur.
5. One representativeof Engineering member
College not below the rank of Professor.
6. Secretary, member/secretary
Board of Technical Education,
Uttar Pradesh, Lucknow.
(2) For the purpose of scrutiny of applications of affiliations of new institutions at a preliminary
stage Committee may Constitute a sub-committee consisting of not less than three
members which shall scrutinize and approve the applications.
DUTIES OF INSPECTION AND AFFILIATION COMMITTEE
13.(1) The duties of the inspection and affiliation committee shall be,
(a) to examine proposals on the form prescribed by the Board from time to time regarding
affiliation of any new institution or any affiliated institution proposing to start a new course
of study and to make recommendations for affiliation after considering, as far as possible,
the following points:
(i) whether there is a demand for a particular course of study for which affiliation sought?
(ii) whether the proposed location of institution is satisfactory?
(iii) whether adequate facilities near the proposed location are available to the proposed
institution for power and water supply?
(iv) whether sufficient land is available as per norms of the All India Council of Technical
Education,
(v) whether the financial resources for the purpose of the institution are adequate as per norms
of the All India Council of Technical Education?
(vi) whether adequate hostel facilities in connection with the institution are available?
(vii) whether the staff, buildings and equipment for running the institution or courses of study
are adequate as per Norms of the All India Council of Technical Education; and
(viii) whether the authorities of the proposed institution are prepared to abide by the conditions
of affiliations laid down by the Board?
(b) to inspect if necessary, any institution seeking affiliation or any affiliated institution seeking
permission to start any additional course of study and to make recommendations for it;
(2) Whenever an inspection is carried out as laid down in subclause (b) of clause (1). the
inspection report shall be reduced to writing and shall be sent to the Chairman.
CONDITIONS FOR AFFILIATION
Previous and next
Questions people ask
Is regulation 12 of the Uttar Pradesh Technical Education (Committees and Sub-Committees, Association of Institutions) Regulations, 2000 still in force?
No repeal of the Uttar Pradesh Technical Education (Committees and Sub-Committees, Association of Institutions) Regulations, 2000 is recorded.