Section 72, The Building and other Construction Workers‘ (Regulation of Employment and Conditions of Service) Act, 1996
The Building and other Construction Workers‘ (Regulation of Employment and Conditions of Service) Act, 1996 (27 of 1996) - Section 72
Text of section 72
72. Heat treatment of lifting gears:-The employer shall ensure at a
construction site of a building or other construction work that—
(a) all chains other than bridle chains attached to derricks and all
rings, hooks, shackles and swivels used in hoisting or lowering of
such derricks are effectively annealed under supervision of a
competent person and at the following intervals, namely:
(i) such chains, rings, hooks, shackles and swivels which
are not more than twelve and a half millimetre of length
are so annealed at least once in every six months; and
(ii) all other such chains, rings, hooks, shackles and swivels
are so annealed at least once in every twelve months:
Provided that after such annealing as referred to in sub-clause (i) and sub-
clause (ii) shall not be required if the Inspector, having jurisdiction, after
obtaining the approval of the Director General, directs that such chains, rings,
hooks, shackles and swivels undergo some other treatment and in such cases the
treatment directed by such Inspector shall be followed:
Provided further that in case of such chains, rings, hooks, shackles and
swivels used solely on such derricks and other hoisting appliances which are
worked by hand, the provisions of sub-clause (i) and sub-clause (ii), as the case
48 The Building and Other Construction Workers‘ Rule 73
(Regulation of Employment and Conditions of Service)
Central Rules, 1998
may be, shall apply as if for the period of six months and twelve months the
periods of twelve months and two years have respectively been substituted
therein:
Provided also that in case where the Inspector, having jurisdiction, is of the
opinion that owing to the size, design material or frequency of use of any such
chains, rings, hooks, shackles and swivels, the requirement of this clause for
annealing is not necessary for the protection of building worker, he may after
obtaining the approval of the Director General, certify in writing to such employer
that subject to the conditions specified in such certification, such chains, rings,
hooks, shackles and swivels are exempted from such annealing and thereafter
the provision of this clause shall apply subject to such exemption:
Provided also that this clause shall not apply to—
(i) pitched chains, working on sprocket or sprocketed
wheels;
(ii) rings, hooks and swivels permanently attached to
pitched chains, pulley blocks or weighing machines; and
(iii) hooks and swivels having ball bearings or other case
hardened parts;
(b) a chain or a loose gear made of high tensile steel or alloy steel is
plainly marked with a mark indicating that it is so made;
(c) no chain or loose gear made of high tensile steel or alloy steel is
subjected to any form of heat treatment except where such
treatment is necessary for the purpose of repair of such chain or
loose gear and that such repair is made under the direction of
the competent person;
(d) that the wrought iron gear, the past history of which is not
traceable, is suspected of being heat treated at incorrect
temperature, is normalised before using it on any building or
other construction work.
Previous and next
Questions people ask
Is section 72 of the Building and other Construction Workers‘ (Regulation of Employment and Conditions of Service) Act, 1996 still in force?
No repeal of the Building and other Construction Workers‘ (Regulation of Employment and Conditions of Service) Act, 1996 is recorded.