Section 61, The Building and other Construction Workers‘ (Regulation of Employment and Conditions of Service) Act, 1996
The Building and other Construction Workers‘ (Regulation of Employment and Conditions of Service) Act, 1996 (27 of 1996) - Section 61
Text of section 61
61. Identification and marking of safe working load:-The employer shall
ensure at a construction site of a building or other construction work that-
(a) every lifting appliance and loose gear is clearly marked for its
safe working load and identification by stamping or other
suitable means;
(b) (i) every derrick (other than derrick crane) is clearly marked for its
safe lower working load when such derrick is used either in
single purchase with lower block or in union purchases in all
possible block positions;
(ii) the lowest angel to the horizontal, to which the derrick
may be used, is legibly marked;
(c) every lifting appliance having more than one working load is
fitted with effective means to enable the operator to determine
safe working load at each point under all conditions of use;
(d) means to ascertain the safe working load for lifting gears under
such conditions in which such gears may be used are provided
to enable a worker using such gears and such means shall
consist of—
(i) marking the safe working load in plain figures or letters
upon the sling or upon a tablet or ring of durable
material attached securely thereto in case of chain
slings; and
(ii) either the means specified in sub-clause (i) or notices so
exhibited as can be easily read by any concerned
building worker slating the safe working load for the
various sizes of the wire rope slings used in case of wire
rope slings.
Previous and next
Questions people ask
Is section 61 of the Building and other Construction Workers‘ (Regulation of Employment and Conditions of Service) Act, 1996 still in force?
No repeal of the Building and other Construction Workers‘ (Regulation of Employment and Conditions of Service) Act, 1996 is recorded.