LawGrids logoLAWGRIDS.ORG

Form AT MATERIAL SAFETY DATA SHEET, The Tamil Nadu Control of Industrial Major Accident Hazards Rules,1994: FORMAT MATERIAL SAFETY DATA SHEET

The Tamil Nadu Control of Industrial Major Accident Hazards Rules,1994 - Form AT MATERIAL SAFETY DATA SHEET

Text of form AT MATERIAL SAFETY DATA SHEET

FORMAT MATERIAL SAFETY DATA SHEET

FORMAT MATERIAL SAFETY DATA SHEET (See rules 3 (2) and (3) ) 1. IDENTITY OF MATERIAL Product Name Chemical Designation Trade Name Synonyms Formula Label: Category Class CAS Number UN Number Regulated Identification Shipping Name Codes / Label HAZCHEM Code: Hazardous waste Identification Number Hazardous Ingredients CAS Number 1. 2. 3. 4. 2. PHYSICAL AND CHEMICAL PROPERTIES Physical State (Gas-, Liquid-, Solid-) Boiling Point in degree C Vapour pressure at 35 degree C--------------- mm.Hg. Appearance Melting / Freezing point in degree C Evaporation rate at 30 degree C Odour Vapour Density Solubility in water at 30 degree C (air – 1) Others Specific Gravity PH (Corrosivity, etc., (Water – 1) 3. FIRE AND EXPLOSIVE HAZARDS DATA Explosion / Flammability Flash Point (deg.) C LEL % Auto ignition Temperature degree C Flash Point (deg.) C LEL % TDG Flammability (Classification) 4. REACITIVE HAZARDS Impact (hazardous Combustion products) Stability to Static Discharge (hazardous decomposition products) Reactivity (Conditions to avoid) 51 Hazardous Polymerisation May / May not occur (Conditions to avoid) Incompatibility (Materials to avoid) 5. HEALTH HAZARD DATA Routes of Entry: (Inhalation, skin, mucus membranes and eye contact and ingestion). Effects of Exposure / Symptoms: LD 50 ( in rat) Orally or percutaneous absorption LC 50 (mg/kg body Weight) (in rat) (mg /l)/4 hours. Permissible Exposure Limit (PEL) PPM mg / cu.m Short term ppm mg/cu.m. Exposure Limit (STEL) Threshold Limit PPM mg/cu.m Value (TLV) of ACGIH PPM mg / cu.m Odour Threshold ppm mg/cu.m. Emergency Treatment: 6. HAZARD SPECIFICATION NEPA Health Flammability Stability Special HAZARD Signal Known Hazards: Combustible Liquid Water Reactive Material Irritant Flammable Material Oxidiser Sensitizer Pyrophoric Material Organic peroxide Carcinogen Explosive Material Corresive Material Mutagen Unstable Material Compressed Gas Other (Specify) 7. SAFE USAGE DATA Ventilation General / Mechanical Local Exhaust Eyes (Specify) Protective Respiratory (Specify) Equipment (Gloves (Specify) Required Clothing (Specify) Other (Specify) Precautions Handling & Storage Others (Specify) 52 8. EMERGENCY RESPONSE DATA Fire Extinguishing Media Fire Special Procedures Unusual Hazards Exposure (Inhalation, skin and eye contact, First Aid Measures ingestion) Spills Steps to be taken Waste Disposal Method 9. ADDITIONAL INFORMATION 10. SOURCES USED Reference to books, journals, etc., 11. MANUFACTURE / SUPPLIER DATA Firm’s Name Standard packing Mailing Address ------------------------- Telephone Number Other Telex Number Other Telegraphic Address ----------------------- Contact person in Emergency Emergency Telephone in Transit areas. Acronyms and Glossary of terms: CAS: Chemical Abstract Service Registration Number UN Number: United Nations Number. HAZCHEM Code: Emergency Action Code (EAC), allocated by the Joint Committee of Fire Brigade Operations, U.K. TDG Flammability: Transport of Dangerous Goods-- Flammability Classification by United Nations. NEPA: Nation Fire Protection Association USA. 53 LD50 and LC 50 represent the dose in mg/kg/ of body weight and the concentration in mg/l for 4 hours having lethal effect on 50% of the animals (rats) treated. PEL: Permissible Exposure Limit as laid down in the statutes. TVL: Threshold Limit Value as laid down by the American Conference of Governmental Industrial Hygienists (ACGIH) USA. STEL: Short Term Exposure Limit as laid down in the statutes or by the ACGIH. GUIDELINES: All efforts should be made to fill in all the columns. No column should be left blank. In case certain information is applicable or available, N/App. or N/Av. sign should be used. 54 SCHEDULE -6 [See Rule 5(1)] INFORMATION TO BE FURNISHED REGARDING NOTIFICATION OF A MAJOR ACCIDENT Report number ………………………………… of the particular accident. 1. General data a) Name of the site b) Name and address of the occupier (Also state telephone/telex number) c) i. Registration number ii. Licence number (as may have been allotted under any status applicable to the site, e.g.the Factories Act) d) i. Nature of industrial activity (Mention what is actually manufactured, stored etc.) ii. National Industrial Classification, 1987 at the four digit level. 2. Type of major accident Explosion Fire Emission of hazardous chemicals 3. Description of the major accident. (a) Date, shift and hour of the accident (b) Department/Section and exact place where the accident took place (c) The process/operation undertaken in the Department / Section where the accident took place. (attach a flow chart, if necessary) (d) The circumstances of the accident and the hazardous chemicals involved 4. Emergency Measures taken and measures envisaged to be taken to alleviate short term effects of the accident. 5. Causes of the major accident. Known (to be specified) …………… Not Known …………… Information will be supplied as soon as possible …………… 6. Nature and extent of damage (a) Within establishment - casualties …………… Killed …………… Injured …………… Poisoned 55 -Persons exposed to the major accident …………… -material damaged …………… -damage is still present …………… -danger no longer exists. …………… (b) Outside establishment -casualties. …………… Killed …………… Injured …………… Poisoned Persons exposed to the major accident ……………………………………… -material damaged …………… -damage is still present …………… -danger no longer exists …………… -damage to environment …………… 7. Data available for assessing the effects of the accident on persons and environment. 8. Steps already taken or envisaged (a) to alleviate medium or long term effects of the accident (b) to prevent recurrence of similar major accident (c) Any other relevant information. 56 SCHEDULE -7 [ See Rule 7(1)and 9(b)] 1[INFORMATION TO BE FURNISHED FOR THE NOTIFICATION OF SITE] Particulars to be included in a notification of site 1. The name and address of the occupier making the notification. 2. The full postal address of the site where the notifiable industrial activity will be carried on. 3. The area of the site covered by the notification and of any adjacent site which is required to be taken into account by virtue of Schedule 2(b) and Schedule 3(b). 4. The date on which it is anticipated that the notifiable industrial activity will commence or if it has already commenced a statement to that effect. 5. The name and maximum quantity liable to be on the site of each hazardous chemical for which notification is being made. 6. Organisation structure, namely, organisation diagram for the proposed industrial activity and set up for ensuring safety and health. 7. Information relating to the potential for major accidents, namely- (a) identification of major accident hazards; (b) the conditions or events which could be significant in brining one about; (c) brief description of the measures taken. 8. Information relating to the site namely:- (a) a map of the site and its surrounding area to a scale large enough to show any features that may be significant in the assessment of the hazard or risk associated with the site; (i) area likely to be affected by the major accident. (ii) Population distribution in the vicinity. (b) a scale plan of the site showing the location and quantity of all significant inventories of the hazardous chemicals; (c) a description of the processes or storage involving the hazardous chemicals, the maximum amount of such a hazardous chemical in the given process or storage and an indication of the conditions under which it is normally held; (d) the maximum number of persons likely to be present on site. 9. The arrangement for training of workers and equipment necessary to ensure safety of such workers. 1 Subs. by G.O. Ms. No. 17, Labour and Employment (M-2), dated the 21st February, 2008. (deemed to have come into force on 16th July, 2008), for the heading “Information to be furnished for the notification of activities sites”. 57 SCHEDULE 8 [See rule 10 (1)] INFORMATION TO BE FURNISHED IN A SAFETY REPORT 1. The name and address of the person furnishing the information. 2. Description of the industrial activity, namely: (a) site, (b) construction design, (c) protection zones (explosion protection, separation distances), (d) accessibility of plant, (e) maximum number of persons working on the site and particularly of those persons exposed to the hazard. 3. Description of the processes, namely — (a) technical purpose of the industrial activity, (b) basic principles of the technological process, (c) process and safety-related data for the individual process stages, (d) process description, (e) safety-related types of utilities. 4. Description of the hazardous chemicals, namely — (a) chemicals (quantities, substance data on physical and chemical properties, safety-related data on explosive limits, flash-point, thermal stability, toxicological data and threshold limit values, lethal concentration), (b) the form in which the chemicals may occur on into which they may be transformed in the event of abnormal conditions, (c) the degree of purity of the hazardous chemicals. 5. Information on the preliminary hazard analysis, namely — (a) types of accident, (b) system elements or foreseen events that can lead to a major accident, (c) hazards, (d) safety-relevant components. 6. Description of safety-relevant units, among others ; (a) special design criteria, (b) controls and alarms, (c) pressure relief systems, (d) quick-acting valves, (e) collecting tanks / dump tanks, (f) sprinkler systems, (g) fire protection. 58 7. Information of the hazard assessment, namely : (a) identification of hazards, (b) the causes of major accidents, (c) assessment of hazards according to their occurrence frequency, (d) assessment of accident consequences, (e) safety systems, (f) known accident history. 8. Description of information on organisational system used to carry on the industrial activity safety, namely : (a) maintenance and inspection schedules, (b) guidelines for the training of personnel, (c) allocation and delegation of responsibility for plant safety, (d) implementation of safety procedures. 9. Information on assessment of the consequences of major accidents, namely : (a) assessment of the possible release of hazardous chemicals or of energy, (b) possible dispersion of released chemicals, (c) assessment of the effects of the releases (size of the affected area, health effects, property damage). 10. Information on the mitigation of major accidents, namely : — (a) fire brigade, (b) alarm systems, (c) emergency plan containing system of organisation used to fight the emergency, the alarm and the communication routes, guidelines for fighting the emergency, examples of possible accident sequences, (d) co-ordination with the District Collector or the District Emergency authority and its off-site emergency plan, (e) notification of the nature and scope of the hazard in the event of an accident. (f) antidotes in the event of a release of a hazardous chemical. 59 1[SCHEDULE 9] [See rule 13(1)] Details to be furnished in the on-site emergency plan 1. Name and address of the person furnishing the information: 2. Key personnel of the organisation and responsibilities assigned to them in case of an emergency: 3. (a) (b) Outside organisanions if involved in assisting during on-site emergency — Type of accidents. Responsibility assigned. 4. Details of liaison arrangement between the organisations: 5. Information on the preliminary hazard analysis — (a) (b) (c) (d) Type of accidents. System elements or events that can lead to a major accident. Hazards. Safety relevant components. 6. Details about the site — (a) (b) (c) Location of dangerous substances. Seat of key personnel. Emergency control room. 7. Description of hazardous chemicals at plant site — a) (b) (c) Chemicals (quantities and toxicological data). Transformation if any which could occur Purity of hazardous chemicals. 8. Likely dangers to the plant: 1 Schedule 9 added by GO. No. 17, Labour and Employment (M-2), dated the 21st February, 2008 (deemed to have come into force on 16th July, 2008). 60 9. Enumerate effects of,-- (a) Stress and strain caused during normal operation; (b) fire and explosion inside the plant and effect if any, of fire and explosion outside. 10. Details regarding,-- (a) (b) (c) (d) (e) (f) warning alarm and safety and security systems , alarm and hazard control plans in line with disaster control and hazard control planning, ensuring the necessary technical and organizational precautions , reliable measuring instruments, control units and servicing of such equipments ; precautions in designing the foundation and load-bearing parts of the building , continuous surveillance of operations , maintenance and repair work according to generally rules of good engineering practices , 11. Details of communication facilities available during emergency and those required for an off-site emergency 12. Details of fire-fighting and other facilities available and those required for an off-site emergency 13. Details of first aid and hospital services available and its adequacy: SCHEDULE 3 NAMED CHEMICALS CLASSES OF SUBSTANCES AS DEFINED IN PART – I, SCHEDULE –1 AND NOT SPECIFICALLY NAMED IN PART –I

Previous and next

All provisions of The Tamil Nadu Control of Industrial Major Accident Hazards Rules,1994

Questions people ask

Is form AT MATERIAL SAFETY DATA SHEET of the Tamil Nadu Control of Industrial Major Accident Hazards Rules,1994 still in force?

No repeal of the Tamil Nadu Control of Industrial Major Accident Hazards Rules,1994 is recorded.