Form R.S. 5.30, THE RAJASTHAN MOTOR VEHICLES RULES, 1990: Form R.S. 5.30
THE RAJASTHAN MOTOR VEHICLES RULES, 1990 - Form R.S. 5.30
Text of form R.S. 5.30
Form R.S. 5.30.
Form R.S. 5.30.
(14) The Regional Transport Officer may, for reasons to be recorded in
writing, decline to renew the agent's & licence.
(15) The licensee:-
(a) shall not issue or book tickets for any stage carriage owned by
a- State Undertaking operating in the State of Rajasthan,
(b) shall not mislead or coax any passenger to board his public service
vehicle;
(c) shall not offer any illegal inducement.
(d) shall behave in a civil and orderly manner with the persons
demanding tickets or travelling in the public service vehicle.
142
Raj. Motor Vehicles Rules, 1990
(e) shall issue every passenger or group of passengers a receipt or tickets
showing total amount charged for distance covered vehicle number.
(f) shall mention in every receipt or tickets his licence number.
(g) shall not charge more than prescribed fare, if any.
(h) shall not involve in activities which lead to unhealthy competition.
(i) shall ensure. that ,the, public service vehicle for which tickets are sold or
booked or is provided for travelling has valid permit to ply on the route
or area.
(j) shall abide by the terms of the contract entered in to orally or in writing
with the passenger or group of passengers'.
(k) shall make alternative arrangement within a reasonable time in case of
break down of the vehicle.
( I ) shall comply with the provisions of the Act and Rules.
(m) shall all time allow officer of Motor Vehicle Department to inspect
record and account maintained by him.
(16) The security furnished may be forfeited in whole or in part by the
Licensing Authority if he is satisfied that he is breaching any condition of licence or not
maintaining the account properly or not submitting return in time after giving the
agent reasonable opportunity of being heard.
(17) If the licence holder is individual, his age must not be less than 18
years.
(18) The Regional Transport 1[Officer] may for reasons to be recorded in
writing suspended or cancel the agents licence or breach of all or any one of the
conditions of licence or on the ground of misconduct of the 1 [licensee].
(19) When the licence is suspended or cancelled or not renewed, it shall be
surrendered forthwith to the Regional Transport Officer who issued the licence.
(20) 'The Agent shall on demand by any officer of Motor Vehicles
Department, not below the rank of Motor Vehicles Sub-Inspector, produce his licence
for inspection.
(21) No person shall held more than one agent's licence effective in the same
region.
(22) If the agent is company or partnership firm, he shall submit deed of
company or partnership and also a copy of agreement entered with the owner of the
public service vehicle.
5.74. Appellate Authority-Agent's Licence.- (1) Any person aggrieved' by
any such order of licensing Authority under rule may prefer an appeal within 30 days
of the date of receipt of such order to the Transport Commissioner alongwith the
prescribed fee.
(2) The memorandum of appeal shall be filed in duplicate setting for th
concisely the grounds of objection and shall accompanied by a certified copy of the
order:
----
1.substituted by G.S.R. 21 dated 26.7.1993 published in Raj. Gazette E.O. Part 4(C)(I), dated
27.7.1993,-(w.e.f. 27.7.1993).
Ai
Provided that the memorandum of appeal shall not relate to more than one
order to be signed by more than one parties.
Licensing of Agents, engaged in the business of collecting, forwarding
and distributing goods carried by Public Carriers.
5.75. "Defination".- In this rule unless the context otherwise requires.
(a) "Agent" means any person who is engaged directly or indirectly in the
business of:-
(i) Collecting, or
(ii) Forwarding and Distributing,
(iii) Collecting, Forwarding and Distributing goods carried by any public carrier.
(b) "Agent's Licence' means a licence granted to an agent under this rule for the
principal establishment and includes the supplementary licence granted to such agent
for any additional establishment such as branch office specified in such
supplementary licence.
(c) 'Goods' includes live-stock and anything carried by a goods vehicle except
living persons and equipments ordinarily used with the vehicle.
(d) 'Licensing Authority' means the Regional Transport Officer of the region in
which the applicant intends to carry on the business and in any other case of the
region in which the applicant has his principal place of business.
(e) 'Perishable Goods' means any goods which are subject to steadily and
great natural decay.
5.76. Prohibition to act an agent except under a licence.- No person shall
act as an agent unless he holds a valid licence authorising to carry on of his
business of agent at a place or places specified in licence:
Provided that any person already working as an agent on the date of the
commencement of these rules shall be allowed to obtain a licence with a period of
three months from such date.
5.77. Licensing of Agent. (1) Any person desiring to obtain an agent licence
shall make an application to the Regional Transport Officer of the region in which he
has his place of business, or as the case may be, his principal place of business.
Such application shall be made in Form R.S. 5.32.
(2) The application shall be accompanied by the prescribed fee.
(3) On receipt of an application made, the Licensing Authority shall having regard
among other things to the following matter either grant or renew or refuse to grant or
renew the licence.-
(a) The number of goods vehicles, if any, either owned by the applicant or
under his control.
(b) The suitability of the accommodation under the control of the
applicant for the storage of goods at every operating place;
(c) The facilities provided by the applicant for parking the goods vehicle by
loading or unloading without hindrance to the general traffic in the area;
(d) The financial resources of the applicant and his experience in the trade.
(4) The Licensing Authority shall either grant or renew the licence including
supplementary licence, for a branch office, if any, in Form R.S. 5.33. Specify the
place or places where the business may be carried on or refuse to grant or renew
the licence :
Provided that the Licensing Authority shall not refuse to grant or renewal the
licence or supplementary licence for a branch office applied for, unless the applicant
has given an opportunity of being heard and the reasons for refusal are recorded and
communicated to him in writing.
(5) The Regional Transport Officer shall cause copies of any licence granted to
it, under 'this rule to be sent to the concerned District Transport Officer and
also intimate them about the refusal and the cancellation.
(6) The Licensing Authority shall while granting or renewing the licence (including
any supplementary licence) or at any time during the validity of the licence by
order required the Licence to furnish the security in cash as under:-
S.No. Name of Agent Amount of Security
1. For Collecting Agent Rs. 1,000/-
2. For Distributing Agent Rs. 1,000/-
3. For Collecting & Distributing Agent Rs. 2,000/-
4. For Collecting & Forwarding Agent Rs. 3,000/-
5. For Forwarding & Distributing Agent Rs. 3,000/-
6. For Collecting, Forwarding & Distributing
Agent
Rs.
5,000/-
Having upto. 10
MotorVehicles.
Rs. 10,000/-
Having More than 10
Motor Vehicle
but up to
25 Motor vehicles. Rs.
25000/-above 25
Motor Vehicles.
(7) (i) The licence shall be in two parts, namely the Principal part
(hereinafter referred to as the Principal Licence) issued for every separate
establishment or branch office for loading, unloading or receipt of delivery of the
consignment is carried on shall be mentioned, and the supplementary part (hereinafter
referred as the supplementary liCence). The details of the establishment or the branch
office (such as municipal house number, the nearest road, bye-lane, the postal
delivery district and other land marks in the vicinity to enable identification of the place
of the licensee) duly attested by the Licensing authority, shall be attached to the
licence.
(ii) The principal licence shall be kept and displayed prominently at the head
office and the supplementary licence shall be kept and displayed prominently at
each branch office to which it refers, except when the principal licence or the
supplementary licence, as the case may be, is forwarded to the Licensing Authority for
effecting renewal thereof. Such licence shall be produced before any inspecting officer
of the Transport Department or any police officer in uniform, not below the rank of
Sub-Inspector.
(8) The agent's licence shall be non-transferable.
(9) (a) The agent's licence shall be valid for a period of one year from the
date of its grant or renewal.
(b) The date on which expiry of the supplementary licence shall be
coterminous with the date of expiry of the principal licence irrespective of the date
on which the supplementary licence is granted.
5.78. Renewal of Agent's Licence.- (i) The agent's licence may be
renewed on an application in Form R.S. 5.34 alongwith prescribed fee made to the
Licensing Authority not less than 30 days before the date of its expiry and shall be
accompanied by the principal and by supplementary licence, if any, and the
prescribed fee. If the application for renewal is made after the prescribed period, it
shall accompanied by late fee.
(ii) The renewal of licence shall be made by endorsement of renewal thereof
by the Licensing Authority on the principal and the supplementary licence, if any.
5.79. Conditions for Agent's Licence.- The agent's licence shall be
subject to the following conditions, namely:-
(1) that the licensee shall subject to provisions of this rule provide adequate
space for the parking of the vehicles for the purposes of loading and unloading of goods;
(2) that the licensee shall be responsible for proper arrangements for storage
of goods collected for despatch or delivery or both;
(3) that where the licensee is authorised to collect, or forward and distribute or
collecting, forward and distribute goods, the licensee shall:-
(a) take all necessary steps for proper delivery of goods to the
consignee.
(b) be liable to indemnity the owner of goods for any loss or damage to
goods while in his possession, by adequate insurance cover where
available at the cost of consignor or consignee.
(c) not issue the goods transport receipt without having actually
received the goods.
(d) not deliver the goods to consignee without actually
receiving from the consignee the goods transport receipt
or if the receipt is lost or misplaced, indemnity bond
covering the value of goods.
(4) that the licensee shall maintain proper record of vehicles under
his control and of collection, despatch and delivery of goods which shall °be
opened to inspection by the Licensing authority or any persons duly
authorised in this behalf by any such authority, the licensee shall furnish to
the Licensing Authority by the 31st March every year return in respect of
the previous calendar year in Form R.S. 5.35.
(5) that the licensee shall not charge any commission exceeding that may be
prescribed under this rule.
(6) that the licensee shall furnish the operator with correct figures of the
freight receivable by them from the consignor or the consignee.
(7) that the licensee shall maintain proper accounts of the commission
charged by him and have the same audited by a qualified auditor annually.
(8) that the licensee shall ensure that the goods vehicles under his control
have valid permit for the route or area on which the vehicles have to ply.
(9) that the licensee shall maintain in good condition a weighing device
capable to weighing at a time not less than 1.000 kilograms.
(10) that the licensee shall attend to customer in the order in which they approach
him, provided that the customer in respect of the perishable goods shall be given
priority over other customers and shall be attended to in the order in which they
approach to the licensee:
Provided further that the State Government may in its discretion alter the priority.
(11) that the licensee shall not refuse to accept goods for transport without valid
reasons.
(12) that the licensee shall assign the available traffic amongst the operators in
the order in which they have approached him and shall maintain a register
chronologically recording particulars of the available traffic and the waiting operators.
(13) that the licensee shall comply with the provisions of these rules and shall
observe the conditions specified in the licence.
(14) that the Licensing Authority may at his discretion or for forfeiture in whole
part of the security or the additional security furnished by the licensee for
contravention of any of these rules or for breach of any of the aforesaid conditions
by the licensee.
(15) that the Licensing Authority may after giving a notice of not less than one
month in writing either vary the condition of the licence to attach to the licence
further conditions.
(16) that the licensee shall declare its principal place of business where he will
keep all the record relating to agency ready for inspection.
(17) that the licensee shall not collect, forward and distribute any goods prohibited
to define Acts and Rules prevailing in the State or under notification issued by the
State Government from time to time.
(18) that the licensee shall keep adequate fire fighting equipment in good order
at the premises.
5.80. Particulars to be maintained in contract of agency.- All contracts
entered into or way bills issued by the licensee for the purpose of collecting forwarding
or distributing goods shall be in writing and shall contain the following particulars,
namely:-
(i) name and address of the consignors or the consignee;
(ii) description and weight of the consignment;
(iii) destination and its approximate distance in kilometers from the starting station;
(iv) freight for tonne, kilometers and for the whole consignment.
(v) delivery instructions that is approximate date by which and the exact place
at which the goods are to be delivered to the consignee.
(vi) terms of payment.
(vii) name of the owner, driver, registration number of the vehicle and its
authorised loads, and. the rate and the amount of the commission
5.81. Rate of Commission.- The State Government may by notifications in
the Official Gazette prescribe the rate at which commission may be charged by the
licensee under these rules.
5.82. Places to be used. for loading and unloading of goods.- (1) The
Licensing Authority may in consultation with the Local municipal authority of the
police authority having jurisdiction over the local area concerned or both approve any
premises owned by or in possession of a licensee or the applicant for agent's licence to
be used for loading or unloading of the goods or for parking of goods vehicles or for
storage of goods in the custody of the agent, having regard to suitability of the site,
sanitary conditions and storage facilities provided at such premises.
(2) Any approval under sub-rule (1) shall be subject to the following
conditions, namely:-
(a) that the premises shall at all times be kept in a cleaned conditions and
in good state of repair.
(b) that the premises shall be administered in an orderly manner.
(c) that the licensee shall not change the premises or make any external alteration
to it or in the parking arrangements thereat, as may likely to cause
obstruction to the general traffic in the vicinity without price approval of the
Licensing Authority.
(d) that the licensee shall take all suitable precautions to ensure that no
breach of any provision of the Act or of the Rules in so far as
these provisions relate to the following matter is committed in respect of
any vehicle engaged by him and which is entering of leaving or standing
at such premises namely:-
(A) Requirements with a goods vehicle shall be covered by
(1) Valid and effective permit/countersignature for the route area or travel.
(ii) valid certificate of fitness.
(iii) valid certificate of insurance.
(iv) payment of all taxes under the Rajasthan Motor
Vehicles Taxation Act, 1951.
(B) Observance of the regulations/conditions as to:-
(i) construction, equipment and maintenance of
motor vehicles to ,the extent the defects easily
noticeable from the exterior appearance of a motor
vehicle.
(ii) limits of weight and prohibition or restrictions on
use of a motor vehicle.
(iii) loading of goods, overall height, length, width
and projection of load laterally to the front, to the
rear and in a height.
(iv) transport of dangerous or explosive substance
contraband articles under any law for time being
in force.
(v) parking or abandonment of motor vehicles on road
in such a way as to cause obstruction to traffic or
danger to any person or other users of road,
leaving vehicles in dangerous position.
(vi) driving of motor vehicles by persons holding valid
and effective driving licence.
(C) That the licensee shall keep adequate fire fighting
equipments in good order at the premises.
{3) Where the Licensing Authority refuses to approve any premises
under sub-rule (1) he shall communicate in writing his reasons for
such refusal.
5.83. Suspension and Cancellation of licence.- (1) Without prejudice
to any other action which may be taken against the licence, the
Licensing Authority may, by order in writing, cancel the agents licence
or suspend it for such a period, as it may think fit in its opinion any of
the conditions under which the licence has been granted, has been
contravened.
(2) The Licensing Authority may by order in writing cancel the
agent's licence or suspend it for such period, as it may think fit, if in
his opinion any of the conditions under which any premises has been
approved under the above rules, has been contravened.
(3) Before making any order of suspension or cancellation under this
rule the Licensing Authority shall give the licensee an opportunity of
being heard and shall record reasons in writing for such cancellation
or suspension.
5.84. Issue of Duplicate Licence.- If at any time an agent's
licence is lost, destroyed, torned or otherwise defaced so as to illegible
the agent shall forthwith apply to the licensing authority for grant of
duplicate licence. The application for obtaining duplicate licence
shall be accompanied by the prescribed fee. Upon receipt of such
application that authority shall issue a duplicate agent's licence clearly
stamped "Duplicate". If the original licence is subsequently found, the
original licence shall be surrendered to the Licensing Authority.
5.85. Appeals-. (a) Any person aggrieved of order made by the
Licensing Authority under these rules may appeal to the Transport.
Commissioner or within 30 days from the date of such order on its
communication to him alongwith prescribed fee.
(b) The memorandum of appeal shall be filed in duplicate setting forth
concisely the grounds of objection and shall be accompained by a certified copy
of the order
Provided that the memorandum cf appeal shall not relate to more than
one order or to be signed by more than one parties.
5.86. Use of unmetalled road-. The Transport Authority may prohibit
transport vehicles other than Motor Cabs to be used on any unmetalled road in
the State.
1[5.87. Fees-. The fees which shall be charged under the provisions of
this chapter shall be as specified in the Table below.-
2[ijUrq jk"Vªh; jkt/kkuh {ks= esa izpfyr vkSj ,u-lh-Vh fnYyh vkSj {ks=h; ;kstuk 2021 ds iSjk
2-1 esa ;Fkk ifjHkkf"kr jk"Vªh; jkt/kkuh {ks= dks xfBr djus okys gfj;k.kk] mÙkjizns’k vkSj jktLFkku
ds mi&{ks=ksa esa jftLVªhÑr] ;wjks ekudks ds vuq:i ifj"Ñr ¼lh-,u-th½ dk mi;ksx djus okys
eksVj dSc@VSDlh vkSj vkWVks fjD’kk ds lafonk xkMh ijfeV ds izfrgLrk{kj ds fy, dksbZ Qhl
izHkkfjr ugh dh tk;sxhA
-----------
1- Subs. by G.S.R. 108(E)dated 11-01-2000 (Pub. in Raj. Gaz , Ex-ord pt-
4(Ga)(I),dated 11-01-2000)
2. vf/klwpuk la[;k ,Q 7 ¼3½ifj@:Yl@,p-d;w@1995@17833 fnukad 04-09-2008 th-
,l vkj 79 ¼jkt-jkti= fo’ks"kkad Hkkx&4&6¼1]½ fnukad 08-09-2008 ij izdkf’kr½ }kjk tksMk
x;kA
TABLE
S.No. Purpose Amount
(in Rs.)
Rule
1 2 3 4
1 For application to grant/renewal/countersignature of
permit (other than temporary permit)
5.5,
5.27
and
5.28
(i) Two seater Auto rickshaw 100/-
(ii) Educational Institution Bus/ Mini bus/
Tempo /Vikram/ Auto tonga
250/-
(iii) Stage Carriage/Contract Carriage excluding
minibus,-
(a) For interstatal permit
1500/-
(b) Other than interstatal permit
(c) ) Stage Carriage on Nationalized Routes
750/-
1500/-
(iv) Motor cab/ Maxi cab/Public Carrier or Private
Carrier
300/-
2 For grant and renewal of a permit (other than temporary
permit)
5.9,
5.27
and
5.28
(i) Stage Carriage,-
(a) Public Carrier , private carrier, contract carrier
excluding mini bus
1500/-
(b) Stage carriage on Nationalised Routes 5000/-
(ii) Educational Institution Bus/ Minibus/ Motor cab/Maxi cab 1000/-
(iii) Auto Tonga/Auto Rickshaw/ Vikram/ Tempo 300/-
(iv)Light Transport Vehicles 500/-
3 For grant of Temporary permit or counter-signature for 30
days or part thereof
200/- 5.5
4 For Countersignature of a Non-temporary permit or its
renewal
5.28
(i) For heavy Transport Vehicles 1500/-
(ii) Medium Transport Vehicles 1000/-
(iii)Light Transport Vehicles 500/-
5 Fee for transfer of permit otherwise than by inheritance or
succession
5.36
(i)Stage Carriage,-
(a) Stage carriage on other than Nationalised Routes 3000/-
(b) Stage carriage on Nationalised Routes 10,000/-
(ii)Public Carrier and Contract Carriages other than Motor
cab, Maxi cab, Tempo, Vikram and Auto
rickshaw
(iii) Contract Carriage (Mini bus, Tempo, Vikram, Motor Cab,
Maxi cab)
(iv) Educational Institution Bus/ Autorickshaw/ Auto
tonga
1500/-
1000/-
500/-
6 (i) Fee for appeal in STAT against the order of STA 500/- 5.44
(ii) Fee for appeal against the order of RTA 500/-
(iii) Fee for revision of order of STA/RTA 500/-
7 Fee for duplicate copy of a permit 5.38
(I) Part A each copy,-
(a) Stage carriage, Contract Carriage-
(i)For mutilated/defaced 200/-
(ii)In the case of lost/theft 1000/-
(b) Motor Cab/Maxi Cab/Tempo/ Vikram/ Mini
bus/Auto Tonga/Auto Rickshaw/ Public Carrier or
Private Carrier
200/-
(II) Part B each copy,-
(a)Stage Carriage, Contract Carriage
(i) For mutilated/defaced 200/-
(ii)In the case of lost/theft 1000/-
(b) Motor Cab/Maxi Cab/ TempoVikram/ Mini
Bus/ Auto Rickshaw/Auto Tonga/Public Carrier or
private Carrier
200/-
(III) Temporary permit each copy 200/-
(IV) Authorization each copy 200/-
8 Agents Licence,-
5.73(3)
and
5.77
(i) Application fee 5000/-
(ii) For grant of Licence
For grant of supplementary licence of each additional
establishment
1000/-
1000/-each
(iii) For renewal of licence if the application is made in
time
(a) Principal licence 1000/- 5.78
(b) For each supplementary licence 1000/-
(iv)For renewal of licence if the application is made late
(a) Principal licence 1500/- 5.78
(b) For each supplementary licence 1500/-
(v) For issue of duplicate copy of-
(a) Principal licence 1000/- 5.84
(b) For each supplementary licence 1000/-
(vi) For appeal against the order of Licensing Authority 500/- 5.85
9 Application fee for the cancellation of permit 5.35(3)
(i) For Two Seater/Auto Rickshaw 100/-
(ii) For Mini Bus/Tempo/Vikram/Auto-Tonga. 250/-
(iii) For Stage Carriage/Contract Carriage
(a) For interstatal permit 1000/-
(b) For Other than interstatal permit 500/-
(iv) For Motor Cab/Maxi Cab/Public Carrier/ Private Carrier 300/-
10 Application fee for each amendment in already issued time
table of a Stage Carriage vehicle, if applied by permit
holder.
5.39
(a) Stage Carriage on other than Nationalised Routes
(b) Stage carriage on Nationalised Routes
1000/-
2000/-
Note: A woman applicant on Auto Rickshaw/Taxi cab/Maxi Cab shall be exempted
if such vehicle is registered in the name of applicant woman.
1- Subs. by G.S.R. 42 dated 12-07-2001 (Pub. in Raj. Gaz. Ex.ord Pt-4 (Ga)(I)
dated 12-07-2001)
2- Subs. by Noti F7(4)pari/rules/Hq/92/12166 dated 22-06-2016 (w.e.f 22-06-
2016)
CHAPTER VI
SPECIAL PROVISIONS RELATING TO STATE
TRANSPORT UNDERTAKINGS
6.1.Definition- For the purpose of this Chapter unless there is
anything repugnant in the subject or context:
(a) Managing Director.- Means Managing Director of
Rajasthan State Road Transport Corporation and includes any
other officer who may be authorised by the State Government
or the corporation to perform the functions of the Managing
Director.
(b) ‘Scheme’- Means a scheme framed in pursuance of Section
99 of the Act.
(c) State Transport Undertaking.-Means the Rajasthan State
Road Transport Corporation established under section 3 of
the Road Transport Corporation Act of 1950.
6.2. Preparation of scheme.- While preparing scheme under
this chapter the State Government may call any information
from Rajasthan State Transport undertaking with a view to
formulate a proposal regarding scheme under section 99 of
the Act. The scheme shall be published in Form R.S. 6.1 in
Official Gazette and not less than one newspaper in Hindi
language circulating in the area or route proposed to be
covered by such scheme, by the Government.
6.3. Manner of filing objections.- (1) Any person affected
by the scheme and wishing to file objections under section
100 of the Act shall do so in the form of a memorandum in
duplicate, setting forth concisely the grounds of objections to
the scheme within 30 days of the publication of the scheme in
the Official Gazette.
(2) The memorandum of objection shall be addressed to the
Secretary to the Government of Rajasthan in the Transport
Department.
(3) A copy of the memorandum shall be sent by the objector
to the Managing Director of [Concern State Transport
Enterprises (miØe) ].
(4) The memorandum of objections shall also contain the
following information:-
(i) full name and permanent address of the objector;
(ii) whether or not such person is holder of permit
issued under the provisions of Act;
(iii) the particulars of the route or routes as specified in
such permit or permits;
(iv) the Manner in which Objector is affected by the
Scheme.
6.4. Consideration and Disposal of Objections.- (1) The
objections received shall be considered by such officer as is
authorized to do so by order under the rules made by the
Governor in pursuance of clause (3) of Article 166 of the
Constitution of India.
(2) The said Officer shall fix the date, time and place of
hearing of the objections and issue general notice in the
Official Gazette asking the objector and the Managing
Director to appear before him in person or through a duly
authorised agent and the publication of the notice in Official
Gazette shall be deemed to be personal service on the parties.
(3) The notice under sub-rule (2) shall be published at least
30 days before the date of hearing fixed.
(4) No objector shall be entitled to be heard by the State
Government unless the objections are made in accordance
with the provisions of these rules.
(5) After hearing objections the parties as may appear, the
officer shall have a decision whether the scheme should be
approved or modified, as he may deem proper.
6.5.Publication of Approved Scheme.- Subject to proviso to
sub-section (3) of Section 100 of Act, a scheme so approved
or modified shall be published in the Official Gazette and at
least one Hindi news paper circulating in the area or route
covered by such scheme in Form R.S. 6.2.
6.6. Consequences of publication of the scheme.- Upon the
publication of the scheme under sub-section (3) of section
100 of the Act, the consequences as hereinafter stated, shall
have effect in respect of the notified route or area or portion
thereof:-
(1) No person other than the State Transport Undertaking
either singly or in conjunction with other State Transport
Undertaking shall be entitled to a permit under Chapter V of
the Act.
(2)The Managing Director shall communicate the scheme
published under rule (5) to the Regional Transport Authority
or to each Regional Transport Authority and each such
Regional Transport Authority, as the case may be, shall give
effect to the approved scheme forthwith.
6.7. Application for permit under Section 103.- (1) Every
application under sub-section (1) of Section 103 for a Stage
Carriage permit shall be made in the Form R.S. 5.2 and for a
Contract Carriage permit in Form R.S. 5.3.
(2) The State Transport Authority or the Regional Transport
Authority, as the case may be, shall on receiving applications
referred to sub-rule (1) satisfy itself that the application
relates to notified area or the route specified in approved
scheme and shall issue stage carriage permit in the Form R.S.
5.10 and Contract Carriage permit in Form R.S. 5.11 to State
Transport Undertaking.
6.8. Contravention of the approved scheme prohibited.-
(1) No person shall use or cause to be used a transport vehicle
on the notified route or area or portion thereof in
contravention of the provisions of the approved scheme.
(2) Nothing in this rule shall apply to use on transport vehicle
in emergency for the convenience of a person suffering from
sickness or injury or for the transport of dead body or for the
transport of medical aid or medical medicines supplied to
relief distressed:
Provided that the person operating a vehicle shall report,
within seven days, such use to the Registering Authority of
the region in which he does so.
6.9. Giving effect to the approved scheme.- (1) For the
purpose of giving effect to the approved schemes, the
Regional Transport Authority concerned shall forthwith
cancel or modify or refuse to renew or make ineffective the
existing permit in respect of notified route or portion thereof
and serve upon the holder of such permits notices to that
effect.
(2) Nothing contained in Chapter (V) of the Act or in the
Rules made thereunder, shall apply to the proceedings taken
under these rules.
6.10. Disposal of articles found in the vehicle.- (1) The
maximum period for claiming by owner of any article left by
him in any transport vehicle operated by the State Transport
Undertaking shall be 15 days.
(2) Where any article found in any such vehicle is not
claimed by its owner within the period mentioned in sub-rule
(1), the State Transport Undertaking may sell the article by
public auction. A notice of such auction shall be displayed,
15 days in advance of the date of auction on the notice board
at the place where the auction is to be held and also publish
in the local news papers:
Provided that nothing in this rule shall apply to any article
which is of perishable nature or has any danger or loading the
greater part of its value and it shall be lawful for the State
Transport Undertaking to dispose off any such article at any
time as the circumstances may require.
6.11. Manner of service of an order under Chapter (VI).-
Every order under Chapter (VI) of the Act shall be served:-
(a) by tendering or delivering a copy thereof to the person one
whom it is to be served or his agent, if any, or
(b) by sending it by registered post at the last known address
of the person on whom it is to be served, or
(c) by fixing a date of some conspicuous place of his last known
residence or place of business in case the above two methods
are considered impracticable.
CHAPTER VII
CONSTRUCTION , EQUIPMENT AND MAINTENANCE
OF MOTOR VEHICLES
7.1 General rules regulation of construction etc. of Motor
Vehicle-
(1) No person shall use and no person shall cause or allow to be
used or to be in any public place any motor vehicle which does not
comply with the rules contained in Chapter V of the Act, and rules
made under this Chapter by Centrl /State Government or with any
order thereunder made by competent Authority to pass such order.
by Competent Authority to pass such order.
(2) Nothing in this rule shall apply to a motor vehicle which has
been damaged in an accident while at the place of the accident or
to a vehicle so damaged or otherwise rendered defective while
being removed to the reasonably nearest place of repair or
disposal.
(3) Provided that where a motor vehicle can no longer remain
under the effective control of the person driving the same it shall
not be moved except by towing.
7.2 Use of Red Lights- The State Government may allow the use
of red light to the front of the motor vehicle carrying high
dignitaries or a vehicle escorting such vehicle as may be notified
from time to time.
7.3 Mirror- Every motor vehicle, other than a transport vehicle not
being a motor cab or a motor cycle having not more than two
wheels and to which a side car is not attached, shall be fitted either
internally or externally and every transport vehicle, other than a
motor cab, shall be fitted externally with a mirror so placed that the
driver have a clear and distinct vision of vehicles approaching from
the rear.
Provided that the State Government may, by general or
special order, exempt any transport vehicle or class of transport
vehicles from the provision of this rule on such conditions as may
be specified in the order, if it is satisfied that having regard to the
construction of such vehicles or class of vehicles fitting of a mirror
does not serve any useful purpose.
7.4 Restriction regarding televisions set or video in the Motor
Vehicles- No television set or video shall be fitted or kept on or
near the dash board of the motor vehicle or shall be kept within the
view of the driver.
7.5 Dangerous projection- (1) No mascot or other similar fitting
or devices shall be fitted on any motor vehicle registered in India,
in any position where it is likely to strike any person with whom
the vehicle may collide. Unless, the mascot is unlikely to cause
injury to any person of any projection thereon.
(2) No motor vehicle shall be permitted to be used which is so
constructed that any axle hub or hubcap projects laterally more
than ten centimeter beyond the rim of the wheel to which it is
attached, unless the hub or hubcap does not project laterally
beyond the body or wings of the vehicle and is provided with an
adequate guard.
7.6 Springs- Every motor vehicle and every trailer, drawn thereby
shall be equipped with suitable and sufficient means of springing
adequately maintained in good and sound condition between the
road wheels and the frame of the vehicle:
Provided that this rule shall not apply to-
(i) any motor vehicle registered in India before the first day
of April, 1951 if any means of springing with which it is
fitted are adequately maintained in good and sound
condition.
(ii) any tractor not exceeding (four thousand five hundred
and thirty six kilograms) in weight unladen if all the
unsprung wheels of the tractor are fitted with pneumatic
tyres;
(iii) any land tractor, land implement, agricultural trailer,
trailer equipped with pneumatic tyre having axle weight
not exceeding (3050) kilograms avoirdupois, or any
trailer used solely for the haulage of felled tyres or such
other heavy loads as cannot be carried on spring.
(iv) Vehicles designed for use in works or in private premises
and used on a road only in passing from one part of the
works of premises to another, or to works or premises
within a distance of 3.2 kilometers;
(v) Such motor vehicle or class of motor vehicles not fitted
with the means of springing by the manufacturers which
the Government, may, by general of special order,
declare to be otherwise suitable for use on public roads
on the conditions specified in the orders.
7.7 Mudguard- Every motor vehicle except a tractor or a trailer,
shall unless adequate protection is afforded by the body of the
motor vehicle, be provided with mudguards or other similar fitting
to catch, so far as practicable mud or water thrown up by the
rotation of the wheels.
7.8 Attachment to motor vehicle- (1) Every side-car attached to a
motor cycle shall be so attached, at left hand side of the motor
cycle, that the wheel thereof is not outside perpendicular planes at
right angles to the longitudinal axis of the motor cycle passing
through the extreme projecting points in front and in the rear of the
motor cycle.
(2) Every pillion seat attached to a motor cycle shall have;
(i) two foot-rests one on either side of and directly below the seat
fitted in such a manner that a person sitting on the pillion seat can
rest his feet on such foot-rests;
(ii) a suitably sprung cushion seat; and
(iii) a hand grip fitted to the front of the seat.
(3) No pillion seat shall be attached to a motor cycle with less than
45 cc. ENGINE.
(4) The rear wheel of every motor cycle on which a pillion seat is
fixed, shall be covered by a protective device, covering twothirds
of the areas of the rear wheel so as to prevent the clothes of the
pillion rider from getting entangled in the spokes thereof.
7.9 Communication with driver- Every motor vehicle for the use
of passengers in which the driver's seat is separated from any
passenger's compartment by a fixed partition which is not capable
of being readily opened shall be furnished with efficient means to
enable the passengers in such compartment and the conductor, if
any to signal to the driver to stop the vehicle.
7.10 Use of military colours and registration marks prohibited-
(1) No motor vehicle other than a military motor vehicle shall be
used, in any public place, unless it is painted in colours scheme
different form that usually employed for military motor vehicles.
(2) No such motor vehicle shall exhibit or carry any military
registration mark.
SPECIAL RULES APPLICABLE TO ALL PUBLIC AND
PRIVATE SERVICE VEHICLES
7.11 General- Every public service and private service vehicle,
and all parts thereof including paint work or varnish, shall be
maintained and in a clean and sound condition, and the engine
mechanism and all working parts in reliable working order.
7.12 First-Aid-Box- Every public service and private service
vehicle shall carry a First-Aid equipment in the erosal bottles
approved by Bureau of Indian Standard containing medicine for
burns, wound, painkillers and dressing material as prescribed by
the State Transport Authority and dust proof first-Aid-Box
containing the following articles namely:-
i. a leaflet containing first-aid instructions approved by the State
Government from time to time;
ii. twenty-four sterilised finger dressing;
iii. twelve sterilised hand and foot dressings;
iv. twelve sterilised large or body dressings;
v. one extra large, two large and ten small sterilised burn
dressings;
vi. two and half ounce packets of sterilised cotton wool;
vii. a bottle of 2 percent tincture of loadine or a tube of antiseptic
cream containing 0.5 percent of centrimide B.P. in 9 non
greasy base;
viii. A bottle of Sal Volatile;
ix. An empty bottle fitted with cork and Camel hair brush for eye
drops; and
x. Two medicine glass:
Provided that, the State Government may, by a general or
special order, exempt from the provisions of this rule, any public
service or private service vehicles plying in such area or areas or
on such particular route or routes, and on such conditions, if any,
as may be specified in the order; if it is satisfied that medical aid is
readily available in such area or areas or routes.
7.13 Stability- (1) The stability of a double decked public service
and private service vehicle shall be such that when loaded with
weights of 59 kilograms per person placed in the correct relative
positions to represent the driver and conductor (if carried) and a
full complement of passengers on the upper deck only, if the
surface on which the vehicle stands were tilted to either side to an
angle of 28 degrees from the horizontal, the point at which over
turning occurs would not be reached.
(2) The stability of a single-decked public service vehicle
other than a motor cab or a single-decked trolley bus and private
service vehicle shall be such that under any conditions of load, at
an allowance of 68 kilograms per passenger and his personal
luggage, for which the vehicle is registered, if the surface on which
the vehicle stands were tilted to either side of an angle of 35
degrees from the horizontal the point at which over-turning occurs
would not be reached.
(3) The stability of a single-decked trolley bus shall be such
that under any conditions of load, at an allowance of 68 kilograms
per passenger and his personal luggage for which the vehicle is
registered if the surface on which the vehicle stands are tilted either
side to an angle of 32 from the horizontal, the point at which over
turning occurs would not be reached.
(4) For the purpose of conducting tests of stability the height
of any stop used to prevent wheel of the vehicle from slipping
sideways shall not be greater than two-thirds of the distance
between the surface upon which the vehicle stands before it is
tilted and that part of the rim of that wheel is loaded in accordance
with the requirements of this rule.
7.14 Seating Room- 1[(1)] Every public service vehicle
other than a motor cab 2[/maxi cab] shall confirm to the norms of
seating space, back rest, size and type of seat provided in the table
given below:-
----
1. insterted by G.S.R. 46 dated 4.12.2003, Pub. in Raj. Gazette E.O. Part 4 (Ga) (l)
dated 4.12.2003 (w.e.f. 4.12.2003).
2. Inserted by G.S.R. 56 dated 15.2.2005, Pub. in Raj. Gazette E.O. Part 4 (Ga) (l) dated
15.2.2005 (w.e.f. 15.2.2005).
Description Ordinary Express SeMI
dEluxe
Deluxe
1(a)
distance of
seats back
to back
when seats
are placed
across the
vehicle and
facing in
the same
direction
Min1 [...]
68cms.
Min1 [...]
68cms.
Min1 [...]
75cms.
Min1 [...]
78cms.
(b) Seats
are placed
across the
vehicle but
facing each
other
127cms Not
permissible
Not
permissible
Not
permissible
(c)Seats are
placed
along the
length of
the vehicles
and facing
each other
137cms Not
permissible
Not
permissible
Not
permissible
II Size of
seats
38sq.Cms. 38sq.Cms 42 Sq.Cms. 45 sq. Cms.
III Height
of the back
of seat
above seat
level
40 Cms. 40 Cms. 62Cms. 66 Cms.
iv Typeof
seat and
back of
cushion
cushion
shall be
covered
with
suitable
material
capable of
being kept
in clean
and
sanitary
condition
Phoyure
thance
foam or
rubber
foam
cushion of
minimum 3
Cm.
thickness
with
upholstery
high
quality
modulded
rubber
foam
cushion of
minimum
5cms,
thickness
with
upholestery
high
quality
PVC
leather
modulded
rubber
foam
cushion of
minimum 5
Cms,
thickness
with
upholstery
highquality
PVC
leather
cloth the
leather
cloth
cloth seats shall
be luxury
type with
head reast
at the
extreme
ends and
foldable
hand rest in
between
two seats.
____________________
1.Deleted by G.S.R. 46 dated 4.12.2003, Pub. in Raj. Gazette E.O. Part 4 (Ga) (l) dated
4.12.2003 (w.e.f. 4.12.2003).
¹[(2)] Notwithstanding anything contained in sub-rule (1), stage
carriage vehicles having seating capacity upto 20 excluding driver
and conductor, plying exclusively within the municipality/U.I.T.
area, the seating arrangement shall be such that some seats shall be
placed along the vehicle and some across the vehicle in such a way
that seats shall be placed along the vehicle ans some across the
vehicle in such a way that seats placed along the inner body of
vehicle in two rows facing each other and the seats placed across
the vehicle shall be at the extreme end of the vehicle and the space
left thereafter may be utilized for the standing passengers, and for
stage carriage vehicles plying exclusively within the
municipally/U.I.T. area, having seating capacity more than 20
excluding driver and conductor, the seating arrangement shall be
such that the seats shall be placed across the vehicle facing in the
same direction having a seating arrangement of 2x2 pattern but in
such vehicles the seats in front of the rear gate and at the extreme
shall not ne placed, so the such vacant space may be utilised for
standing passenger.
(3) The seats and back of the seats of vehicles mentioned in
sub-rule (2) shall be provided with fixed cushins. The cushions
shall be covered with leather cloth of good quality or other material
of such kind that they are capable of being kept in a clear and
sanitary cover. The size of the seat provided for the passengers
shall not be less that 38cmx 38cm.
(4) Subject to provisions contained in rule 7.17, the stage
carriage vehicles mentioned in sub-rule (2) may carry standing
passenger upto 50% of its steading capacily.]
Explanation- 1. All the vehicle having the specification prescribed
for vehicle of All India Permits shall be treated as
Deluxe Buses.
1. If in the semi deluxe or deluxe buses they are air-
conditioned or provided with facility of viewing
Video films shall be treated as luxury buses.
2. If ordinary bus or bus having specification of
-----
1. Subs.by G.S.R. 56 dated 15.2.2005, Pub. in Raj. Gazette E.O. Part 4 (Ga) (l) dated 15.2.2005
(w.e.f. 15.2.2005).
express bus and plying as a stage carriage and does
not stop any place before running at least 40 kms.
except of stops specially permitted by Regional
Transport Authority or State Transport Authority as
the case may be.
3. If ordinary or express buses providing night
serivce, seats of side minimum 40 cms. Sq. and
back to back distance 40 Cms. with Sq. back
above seal level 60 Cms. shall be provided.
2[7.14A. Sleeper coach.- 3[(1) Sleeper coach shall mean a Motor
Vehicle desgined or constructedto provide facility to either sleep or
sleep and sit having two tier , arrangement with berth necessarily
on the upper tier shall have 1x1 or 2x1 berth arrangement. The
lower tier may have either of the following arrangements :
(i) Having berth arrangement of 1x1 or 2x1 berth along the
chassis.
(ii) Having seating arrangement of 2x1 or 1x1 seats across
the chassis
(iii) Any other arrangement subject to approval by State
Transport Athority.
(2) Every sleeper coach shall conform to the following
specification namely :-
i. The length of each birth shall not be less than 182 cm.
ii. The width of each birth shall not be less than 60.96 cm
iii. The vehicle shall have a front entrance-cum –exit door on
left side operated by driver/attendant equipped with assist
rails in front of the front axle.
iv. The over all height of the vehicle shall have a maximum of
3.8 meters including A.C. hood.
v. The interior height of the vehicle shall have maximum of
2.15 meters (headroom).
vi. Roof ceiling shall be provided with soft material of
equivalent material like ABS plastic to prevent impact.
vii. The width of gangway shall not be less than 60.96 cm.
viii. The thickness of upper berth shall not be less than 65 mm
and should be also covered with neat fabric.
ix. The clear headroom for seating passengers shall not be less
than 850 mm.
x. The clear headroom for the upper berth shall not be less than
650 mm.
xi. Optical chain in the middle or longitudinal guard between
the two chains shall be provided for upper berth.
xii. Ladder steps for upper berth shall be provided and it shall be
fixed at a minimum height of 250 mm and the distance
between each step shall be 300 mm.
_____________________
2. In . by Ibid
3. Noti no. F 7(3() Pari/Rules/ H.Q. 2005/ IV/16885, dt. 31-08-2015, G.S,R82(pub. in Raj. Gaz.
Ex. ord. Pt. 4( C)III) dt. 01-09.2015).
xiii. An assist handle shall be provided for comfortable
occupation of the upper berth at a convenient height.
xiv. No seat shall be permitted to be fitted in the gangway.
xv. There shall also be sufficient space underneath the lower
berth for keeping the luggage. Wire ropes are to be provided
for fastening the luggage.
xvi. Hatracks inside the saloon shall not be permitted.
xvii. The vehicle shall have weveller suspension or air suspension
or combination of both.
xviii. Emergency exit shall be provided at the rear.
xix. Reflective tape of canary yellow colour of 50 mm. width
shall be provided at rear and front side at skirt level on
bumper.
xx. Each berth shall be provided with neat fabric covering which
shall be capable of being kept in a clean and sanitary
condition.
xxi. Fire extinguisher shall be provided.
xxii. First Aid Box with necessary medicines shall be provided
and it shall be checked every fortnight for its contents and
the validity of medicines.
xxiii. Guard to be provided for lower berths in line with upper
berths with chain.
xxiv. Safety guards covered with soft material on either side of the
upper berths shall be provided.
xxv. Magazine pouches shall be provided at convenient location.
Water bottle holders shall also be provided.
xxvi. Drinking water shall be provided with ice box.
xxvii. Night lamps preferable in blue colour shall be provided in
the gangway.
xxviii. Individual reading light at convenient location for each shall
be provided.
xxix. The material used in the construction shall be provided for
each passenger reasonably of comfortable quality.
(3) Nothing contained in sub-rule (1) & (2) shall apply upto two
year to a vehicle already registered as a sleeper coach on or before
from the date of coming into force of Rajasthan Motor Vehicles
(Amendment) Rules 2005.]
7.14 B. (Deleted by Noti No. F7(3) Pari/rules/hq/ 2005/IV/16885
date 31-08-2015 , G.S.R. 82(Pub. in Raj. Gaz.Ex-ord pt. 4( c) (II) ,
dt. 01-09-2015)] Before deletion of Rule was as under.-
“7.14B Limit of Seating Capacity of Stage Carriage Vehicles.-
(1) The minimum seating capacity of a stage carriage vehicle other
than a motor cab, an auto rickshaw, an express stage carriage or the
stage carriage vehicle plying within Municipal/U.I.T. limits shall
be directly proportionate to the wheel base of the vehicle and the
minimum number of seats to be provided shall be as specified in
column (3) of the following Table. However the operator may
increase the seating capacity consistent with other rule relating to
the seating capacity having due regard to the type of chassis on
which the body is built:
Table
S.No. Wheel base Minimum seating
capacity including
driver and/or conductor
1 2 3
1 254 Cms to 293 Cms 16
2 294 Cms to 305 Cms 20
3 306 Cms to 343 Cms 25
4 344 Cms to 407 Cms 30
5 408 Cms to 432 Cms 35
6 433 Cms to 496 Cms 45
7 497 Cms to 534 Cms 50
8 535 Cms to 541 Cms 55
9 542 Cms to 561 Cms 60
10 562 Cms and above 65
Provided that the minimum seating capacity specified above
may be reduced by two seats in case of vehicle having separate
entrance and exit.
Provided further that no reduction of seating capacity as
mentioned in the certificate of registration shall be allowed after
original registration of the vehicle unless such reduction is
necessitated on account of wrong calculation of the measurements
or when the body is reconstructed.
(2) The Provisions of sub- rule(1) shall not apply to a vehicle
already registered on the date of coming into force of the Rajasthan
Motor Vehicles (Amendment) Rules, 2020, but when the body of
vehicle is reconstructed at any time the provisions of sub-rule(1)
shall be applicable.”
7.15 Projection of seats beyond floor space- Every stage
carriage shall have a body of the saloon type:
Provided that this rule shall not apply to any stage carriage
registered on or before April, 1951.
7.16 Gangway- (1) In every compartment of every public
service vehicle the entrance to which compartment is from the
front or rear, there shall be gangway along the vehicle, and;
(i) where seats are placed along the sides of the vehicle
there shall be as gangway a clear space of not less
than 610 mm. and not more than 630 mm. measured
between the fronts of the seats;
(ii) where seats are placed across the vehicle, there shall
be as gangway a clear space of not less than 305 mm.
and not more than 315 mm. between any part of
adjoining seats or their supports; and
(iii) where seats are placed, some along the sides of the
vehicles and some across the vehicle, there shall be
such gangway or gangways as the State Transport
Authority may determined in each particular case:
¹[Provided that in case of stage carriages plying within the
municipal or city limits other than those vehicles having
seating capacity upto 20 excluding driver & Conductor, the
seats shall be placed across the chassis facing in the front
direction and there shall be as gangway a clear space of not
less than 685 mm and not more than 715 mm.]
(2) Where the vehicle has seats across the full width of the
body with separate doors to each seat, a gangway from front
to rear of the vehicle shall not be required.
7.17 Limit of carrying capacity- Notwithstanding
anything contained in these rules, no public service vehicle other
than a motor cab shall be licensed to carry a number of passengers,
including those standing in excess of that number obtained by
subtracting ninety kilograms from the difference between the
registered laden and unladen weight of the vehicle and dividing the
resulting figures by sixty-five in the case of a double decked
vehicle and double decked vehicle ans single decked vehicle
operated exclusively within the municipal and cantonment areas
and by seventy five in the case of other single decked vehicles.
2[ In case of four wheeled motor cabs the seating capacity
shall be same as of a private vehicle of same type 3[x x] ]
7.18 Driver's seat – (1) No public service vehicle shall be
driven other than from the right hand side of the vehicle.
(2) On every public service vehicle space shall be reserved
for the driver’s seat as to allow him to have full and unimpeded
control of the vehicle and in particular:
i. the part of the seat against which the driver's back
rests, shall not be less than (280 millimeters) from the
nearest point of the steering wheel.
ii. the width across the vehicle shall be not less than 690
millimeters and shall extend to the left of the centre of
the steering column in no case less than 254
millimeters so that a line drawn parallel to the axis of
the vehicle through the centre of any gear lever, brake
lever or other device to which the driver has to have
frequent access line not less than 50 millitmeters
inside the width reserved for the driver's seat.
(3) Arm-rests for the driver not more than (100 milimeters)
wide may be provided within the space specified in clause (ii) of
sub-rule (2).
(4) No public service vehicle shall be so constructed that
any person may sit or any luggage may be carried on the right hand
side of the driver.
__________________
1. Added by G.S.R. 39 dated 26.7.1995, Pub. in Raj. Gazette E.O. Part 4 (Ga) (l) dated
26.7.1995.
2. Subs. by G.S.R. 25 dated 21.6.1996, Pub. in Raj. Gazette E.O. Part 4 (Ga) (l) dated 22.6.1996.
3. Deleted by G.S.R. 6 dated 19.4.2002, Pub. in Raj. Gazette E.O. Part 4 (Ga) (l) dated
19.4.2002.
(5) Every public service vehicle other than a motor cab shall
be so constructed that there shall be separate compartment
containing proper seating accommodation for the driver. This
compartment may be separated by suitable rigid pacification of
metal bar or adequately spaced metal bat, both on the side rigid
pacification of metal bar or adequately spaced metal bar, both on
the side and on the rear, so as to isolate the driver without
obstructing his vision:
Provided that, in the case of a motor cab licensed to carry
five passengers, two passengers may be permitted to be carried by
the side of the driver's seat.
(6) Every public service vehicle shall be so constructed that,
save from the front pillar of the body, if any the driver shall have to
clear vision both to the front and through an angle of 90 degrees to
his right hand side. The front pillar of the body shall be so
constructed as to obstruct th vision of the driver to least possible
extent.
(7) The sub- rule (1) shall not apply to four wheel drive,
jeep, motor cabs.
(8)Notwithstanding anything contained in this rule where
the Government having regard to the availability and utility of any
vehicles fitted with left hand steering control of the expediency of
their use in public interest, is satisfied that it is necessary so to do
the Government may be general or special order, exempt any
public service vehicles or class of such vehicles with such control
from any of the provisions of this rule, on such terms and
conditions, if any, as may be specified in the order.
7.19. Width of Doors.- (1) Every entrance and exit of a
public service vehicle other than a motor can shall be at least 540
millimeters in width and of sufficient height:
1[ Provided that the Stage Carriages plying within the
municipal or city limits other than vehicles having seating capacity
upto 20 excluding driver and Conductor shall have two separate
gates for entry and exit on the left hand sides of the body.]
(2) Every entrance and exit of a stage carriage, not being a
stage carriage operating within the limits of a municipal or city
duly constituted or declared under any law for the time being in
force, shall be fitted with doors so as to prevent the passengers
from falling out.
7.20. Grab Rail.- A grab rail shall be fitted to every
entrance or exists other than an emergency exit, of a public service
vehicle other than a motor cab, to assist passengers in boarding or a
lighting from the vehicle.
7.21. Steps.- (a) In every public service vehicle other than a
motor cab, the top of the tread of the lowest step for any entrance
or exit, other than an emergency exit, shall not ne more than 2[400
millimeters] or less than 250 millimeters above the ground when
the vehicle is empty. All steps shall be fitted with non-slip treads.
Fixed steps shall not ne less then 230 millimeters wide and shall in
no cases project laterally beyond the body of the vehicle unless
they are so projected that they are not liable to injure pedestrians.
(b) Steps in double-decked vehicles. In the case of a double
decked vehicles:
i. the risers of all steps leading from the lower to the
upper deck shall be closed and no unguarded aperture
shall be left at the top landing board;
ii. all steps leading from the lower to the upper deck
shall be fitted with non-slip treads;
the horizontal distance from the nearest point of the
riser of the top step to the vertical line passing through
the nearest point of the seat opposite to the top tread
of the stair case, excluding any grab rail which does
not project more than 7.5 centimeters from the back of
the
seat, shall not be less than 660 millimeters; and
iv the outer-stringer of an outside stair case shall be so
constructed or a band shall be so placed, as to act as
a screen to person ascending or descending and the
height of the outer guard rail shall not be less than
990 millimeter above the front of the tread of each
step.
Exemption: Sub-rules (a) and (b) shall not apply to a vehicle
registered before April, 1951.
7.22 Cushion- The seats of public service vehicle shall be
provided with fixed or movable foam or soft cushions, and the
cushions shall be covered with leather cloth of good quality or
other suitable material so that they are capable of being kept in a
clean and sanitary condition.
7.23 (A) Head room- (1) Every public service vehicle other
than a motor cab shall have the internal height or head room of
every single-decked public service vehicle with a permanent top,
other than a motor cab, shall be measured along the centre of the
vehicle from the top of the floor boards or battens to the underside
of the roof supports and shall be not less than 138 centimeters, and
not more than 185 centimeters:
Provided that the State Transport Authority may specify the
measurements, within the above limits, to which public service
vehicles or particular types of public service vehicles, shall
conform, either generally or in specific areas.
(2) This rule shall not apply to a vehicle registered before
the April, 1951.
(B) Body dimensions guard rails- Every public service
vehicle other than a motor cab shall be so constructed that:-
1. Added by G.S.R. 21 dated 26.7.1993, Pub. in Raj. Gazette E.O. Part 4 (Ga) (l) dated
27.7.1993 ,(w.e.f. 27.7.1993)
2. Subs. by G.S.R. 46 dated 4.12.2003, Pub. in Raj. Gazette E.O. Part 4 (Ga) (l) dated
4.12.2003, (w.e.f. 4.12.2003)
(i) in the case of a single-decked vehicle with an enclosed
body-
(1) the height of the body sides from the floor or the
height to the sills of
the windows, as the case may be, shall not be less
than 7.15 millimeters, and;
(2) if the bottom of any window or other opening is less
than 45 centimeters above the seats, provisions
shall be made by means of guard rails or otherwise to
prevent passengers putting their arms out;
(ii) in the case of a single-decked vehicle with open sides,
guard rails shall be provided along the right hand side of
the vehicle to prevent any person other than the driver
from mounting or alighting from the vehicle on that
side; and
(iii) in the case of a double-decked vehicle with an uncovered
top-deck the top-deck shall be provided with side and end
rails, the top of which shall be at least 915 millimeters
above the deck boards or battens at the side and 460
millimeters above the highest part of any seat and the top
of the from and back rails shall be at least 990
millimeters above the deck boards and battens and shall
follow the chamber of the deck.
(C) Sub-rule (b) shall not apply to a vehicle registered before
the 1st day of April, 1951.
(D) For the purpose of sub-rule (b), the seat back shall not be
deemed to be a part of the seat.
7.24 Protection of passengers from weather- (a) Every public
service vehicle other than a motor cab shall be constructed with a
fixed and watertight roof and every motor cab shall be either
constructed with a fixed and watertight roof or equipped with a
water-tight hood that may be raised.
(b) Every public service vehicle shall have suitable windows,
ventilations or screens capable at all times of protecting the
passenger from the weather without preventing adequate
ventilation of the vehicle. When the screens are made of fabric,
they should be capable of being fastened securely to the vehicle.
(c) Luggage carried on the outside of a stage carriage shall be
protected in wet weather by a suitable water-proof covering. The
covering shall be securely fastened so as to prevent flapping.
7.25 Internal Light- Every public service vehicle, other than a
motor cab, shall be furnished with one or more electric lights
adequate to give reasonable illumination throughout the
passenger's compartment or compartments but of such power or so
screened, as not to impair the forward vision of the driver.
¹[7.26 Body construction- The body of every Public Service
Vehicle shall be soundily constructed to the satisfaction of the
Regional Transport Authority and shall be painted as per the
direction if any of the Regional Transport Authority. The body
shall be securely fastened to the frame of the vehicle.]
7.27 Fuel tanks- (1) No fuel tank shall be placed in any public
service vehicle within sixty centimeters of any entrance or exist of
a single decked vehicle or lower deck of a double-decked vehicle.
(2) The fuel tank of every public service vehicle shall be so
placed that no overflow therefrom shall fall upon any woodwork or
accumulate where it can be readily ignited. The "off" position of
the means of operation shall be clearly marked on the outside of
the vehicle. The filling points of all fuel tanks shall be outside the
body of the vehicle and the filler caps shall be so designed and
constructed that they can be securely fixed in position.
7.28 Carburetors- In every public service vehicle any carburetor
and appears associate there with shall be so placed and shielded
that no fuel leaking therefrom shall fall upon any part or fitting that
is capable of igniting it of in any receptacle where it might
accumulate.
1. Subs. by G.S.R. 21 dated 26.7.1993, Pub. in Raj. Gazette E.O. Part 4 (Ga) (l) dated 27.7.1993, (w.e.f.
27.7.1993).
7.29 Exhaust Pipe- The exhaust pipe of every public service
vehicle shall be so fitted or shielded that no inflammable material
can be thrown upon it from any other part of the vehicle and that it
is not likely to cause a fire through proximity to any inflammable
material on the vehicle; the outlet thereon shall be placed for
enough to the rear to prevent, so far as practicably fumer from
entering the vehicle.
7.30 Electric Wires- All electric wires or leads shall be adequate
insulated.
7.31 Fire extinguisher- (1) With the previous sanction of the
Government, the State Transport Authority may as a condition
precedent to the grant of permits, require all public service vehicles
in any specified area to be equipped with a fire extinguishing
apparatus of a type specified by it and may require that such fire
extinguishing apparatus shall be inspected at such periods and by
such persons, as it may specify.
(2) With the previous sanction of the State Transport Authority,
a Regional Transport Authority may as a condition precedent to the
grant of a permit, required any public service vehicle or any class
of public service vehicles to be equipped with a fire extinguishing
apparatus of a type specified by it and may require that such fire
extinguishing apparatus shall be inspected at such period any by
such persons, as it may specify.
7.32 Locking of nuts- All moving parts of every public service
vehicle and all parts subject to severe vibration connected by bolts
or studs and nuts shall be fastened by some efficient device so as to
prevent them working or becoming loose.
7.33 Floor board- (1) The floor boards of every public service
vehicle shall be so fitted as to exclude as far as possible droughts
and dust.
(2) The floor boards shall not be pierced save for the purpose of
drainage and the hole so made shall be covered by a metallic cover
hinged at one end.
7.34 Spare wheel and tools- Save as otherwise specified, by the
Regional Transport Authority in respect of municipal or
cantonment areas, every public service vehicle shall, at all times be
equipped with not less than one spare wheel or rim, fitted with a
pneumatic tyre in good and sound condition ready and inflated, and
mounted in such a way that it can be readily dismounted and fitted
to the vehicle, in the place of any one of the road wheels.
(2) Sub-rule (1) shall not apply to a public service vehicle, during
the completion of any journey during which it has been necessary
to bring to spare wheel or rim and tyre into use.
(3) Every public service vehicle shall at all times be furnished
with an efficient jack and other tools necessary to change a wheel
or rim and tyre and with the equipment necessary to repair a
puncture.
(4) Every public service vehicle shall, at all time be furnished
with one screwdriver and at least with one spare fuse, one side-
light bulb and one head light bulb and when such vehicle is fitted
with sealed beam head-light with one spare sealed beam unit and a
fan belt, one inspection lamp with 10 meters long wire:
Provided that, the State Government may by general or special
order, exempt for such period as may be specified the rein any
public service vehicle or class of such vehicles in respect of any
area, if it is satisfied that adequate arrangements exists for
expeditious and efficient emergency repairs in such area.
7.35 Inspection of Motor Vehicle- (1) Notwithstanding
anything contained in rule, if the Registering Authority has reason
to believe that owing to the mechanical defects, any vehicle, is in
such condition that its use in a public place constitutes a danger to
the public, or that it is fails, to comply with the requirements of
Chapter-VII of the Act or of the rules made thereunder, he may
cause such vehicle to be inspected by an Inspector of Motor
Vehicles and after giving the owner an opportunity of making any
representation as required under sub- section (1) of section 53,
suspend the certificate of registration of the vehicle under the said
section till such time as the vehicle is produced for inspection duly
repaired.
(2) (a) On inspection if the Inspector of Motor Vehicles is
satisfied that such vehicle is in a mechanically defective condition
he shall issue to the owner a memorandum in Form R.S. 4.8 using
such items thereof as are applicable to non-transport vehicles, and
submit a copy thereof to the Registering Authority.
(b) If on receipt of a copy of such memorandum, the Registering
Authority has reason to believe that owing to the mechanical
defects, the vehicle is in such condition that is use in a public place
constitutes a danger to the public or that it fails to comply with the
requirements of Chapter- VII of the Act of the rules made
thereunder, he may, after giving the owner an opportunity of
making any representation as required under sub-section(1) of
section 53 of the Act, suspend the certificate of registration of the
vehicle under the said section till such time as the vehicle is
produced for re-inspection duly repaired.
(3) The registering authority shall record below the certificate of
registration of the vehicle, the date of every inspection and whether
it was found mechanically fit or defective condition.
(4) A fee for every such inspection shall be fifty rupees and it
shall accompany the application refered to in sub-rule.
7.36. Clearance.- All the under parts of thevehicle inside
the pivots the front axle and steering arms which must be
placed as near as possible to road wheel as far back as
least as the rar axle, shall be, above the ground by not less
than 254 mm, when the vehicle is fully loaded.
(A) Sufficient allowance shall, in addition be made, to
provide for the wear of the tyres, settling down of the
springs, or other causes likely to reduce height so that the
minimum clearance fo 254 millimeters is at all times
maintaines.
7.37. Springs.- (1) Chassis springs shall be properly hung
and must be of sufficient strength and flexibility to meet
all likely contingencies.
(2) The rear springs shall be attached to or bear upon the
back axle casing as near to the road wheels as possible and
he distance between the springs (the distance between the
springs from in side to outside) shall not be less than 50
percent of the overall width of the vehicle.
(3) The front springs shall be as wide-apart as possible and
the difference between them shall not be less than 37
percent of the overall width of the vehicle; provided that if
the width of the rear springs is 53 per cent of the overall
width of the vehicle, or more, the minimum distance
between the front springs may be by (2.54 centimeters)
less than the repuired by this sub-rules.
(4) There shall be no cross springs.
7.38. Wheel Track.- The wheel tracks of both front and
rear wheel shall coincide and the distance between the
centre lines of the tracks of the front wheels shall not be
less than 69 percent of the overall width of the vehicle.
7.39. ventilation.- Every state carriage shall be provided
with adequent means of ventilation so that there shall be
proper ventilation even when the windows, if any, are not
opened. If the carriage is provided with opening windows,
suitable provision shall be made so that opening of the
window could be adjusted.
7.40. Prohibition of painting or Marking in certain
manner.- (1) No advertising device, figure or writing shall
be exhibited on any public service vehicle save as may be
specified by the Regional Transport Authority by general
or specific order.
(2) A public service vehicle when regularly used for
carrying Government Mail by, or under a contract with,
the Indian posts and Telegraphs Department, and exhibit
in a conspicuous place upon plate or a plain surface of the
Motor Vehicle and word “Mail” in red colour on a white
ground, each letter being not less than fifteen centimeter in
height and of a uniform thickness of three quarters of 2.54.
cms.
(3) save as provided in sub-rule (2) no motor vehicle shall
display any sign or inscription which includes the word
‘Mail’.
(4) The Rajasthan State Roadways Vehicles shall have the
following colour scheme:
(a) Larch green from outside.
(b) cream colour strip.
(c) Cream colour front-show.
(d) Cream colour inside roofing upto windows.
(e) Grey colour below windows.
(f) Top of the roof to be of aluminium colour.
1[(4A) Taxi cars plying exclusively within municipal or
city limits shall have the following colours:
Lower part of the body below wind screen glass “Black”
and upper part of the body including roof- “yellow”.]
(5) Save as provided in sub-rule (4) 2[and sub-rule (4) ] no
other Motor Vehicle shall have and include the above
colour shceme.
SPECIAL RULES FOR GOODS VEHICLES
7.41. Body and loading platform of goods vehicle.-
Every goods vehicles including a trailer shall, be equipped
with a strong platform or body so constructed as to be
capable of carrying the load for which it is used without
danger to other roadusers and such that the load can be
securely packed within or fastened to the body or
platform.
7.42. Chocks.- (1) In order to prevent a goods vehicle
from running backward on slopes, or otherwise to render it
immobile, very such vehicle, not being a light motor
vehicle, shall be equipped with two wedge-shaped rigid
chocks, each measuring 30 centimeters in length 30
centimeters in breadth and 254 centimeters in height, with
one of its sides having a slope making an angle of 45
degrees at the end. The plane surface of the sloped side of
each chock shall be rendered concave so as to fit the outer
circumstance of the tyres normally fitted to the rear wheel
of vehicles.
(2) Notwithstanding anything contained in sub-rule (1)
where such vehicle is fitted with single rear wheel, the
breadth of each such chock may be less than (30
centimeters) but not less than 15 centimeters
1. Inserted by G.S.R. 14 dated 17.5.1995, pub.in Raj.
Gazette E.O. part 4 (Ga)(I) dated 17.5.1995.
2. Substituted by G.S.R. 14, dated 17.5.1995, published
in Raj. Gazette E.O. Part 4 (Ga)(I) dated 17.5.1995.
(3) Each such chock shall have a hook and be kept:
(a) in a bracket fitted on the outer skirt of the trail, board
of the vehicle,
Or
(b) where the vehicle have not tailboard, in a metal carrier
fitted between the frame side, members, underneath the
body nearest to the rear wheel or either side.
The tailboard of the vehicle and where the vehicle has not
tailboard, the wooden planks above the fame side
members shall also have a hook in the centre.
(4) Each such shock shall be linked with the tailboard or
where the vehicle has not tailboard with the wooden
planks above the frame side members, by means of metal
chain or steel wire rope of sufficient length and strength,
fastened to the hook in the chock and also to the hook in
the tailboard or the wooden planks, as the case may be.
(5) No person shall use any boulder or any substance of a
similar nature in lieu of wooden chocks on slopes or
otherwise to prevent the goods vehicle other than light
motor vehicle from running backward on slopped or to
render it immobile otherwise.
(6) Notwithstanding anything contained in this rule, the
State Government may by notification in the official
Gazette exempt from the provisions of this rule, any goods
vehicle or class of such vehicles which in its opinion are
not likely to slip backwards on slopes.
7.43. Driver’s seat.- (1) The provisions of rule applicable
to public service vehicles shall also apply to goods vehicle
other than light motor vehicles provided with bucket type
seats:
Provided that, where the State Government, having regard
to the price and utility of any goods vehicle of class of
goods vehicles, is satisfied that it is necessary so to do, the
state Government, may by general or special order,
exempt any goods vehicle or class of goods vehicles fitted
with left hand steering control from the provisions of sub-
rule (1) of rule.
(2) Where a registering authority registers a goods vehicle
in respect of which, or belonging to a class in respect of
which, an order under sub-rule (1) has been made, he shall
note in the certificate of registration, the fact that nothing
in rule in regards to and consequent upon the provisions
requiring that the vehicle shall be driven from the right
hand side shall apply to the vehicle.
7.44. A seat of driver in goods vehicle covered under
National Permit Scheme.- In every public Carrier
vehicles covered under National Permit Scheme a Seat
behind the driver’s seat shall be provided for the spare
driver to sleep. The seat of the spare driver shall not be
less than 6 feet long and 20 inches in width.
7.45. Checking of designs of locally manufactured
trailer.- (1) An application for the approval of a new
design of trailer manufactured in India and intended to be
used as a transport vehicle shall be sent to the Transport
Commissioner, in triplicate by the manufacturer or his
authorized assembler in form R.S. 7.1. Such application
shall be accompanied by three copies of each of the
following in addition to other documents mentioned in the
form of application;
(i) Full specifications;
(ii) Drawings giving all dimension and detail, and
(iii) Set of design calculation of;
(a) Axles,
(b) Springs,
(c) Long bearers,
(d) Cross bearers,
(e) Platform tank or anything that may be carried on
the cross bearers,
(f) Town bar,
(g) Turn tab le of two axle trailers,
(h) Braking arrangements, and
(i) Any other item such as shock absorbers, if
included.
(2) (a) The Transport Commissioner shall forward the
application and the copies of documents to the any
institute approved by Government (hereinafter referred to
as the institute) having competence and technical capacity
to check the design and the trailer, for verification and
recommendation of the greatest laden and axle weights in
respect of the trailer which are compatible with reasonable
safety.
(b) The Institute shall then go through the design and
calculations, and if the design is found satisfactory by it,
certify that would be in its opinion, the greatest laden and
axle weight if the trailer which are compatible with
reasonable safety.
(c) In case, the design is not found satisfactory, the
Institute shall advise the applicant to that effect, and
recommend such changes in the design as may be
required, to make the trailers suitable for the desired load.
(d) The institute may call upon the applicant to furnish
details, if required. In such case, the applicant shall furnish
fresh specification and drawings incorporating alterations,
if any.
(e) When a design is found satisfactory, the Institute shall
return two copies of the approved design, specifications
and calculations which its recommendations as to the
maximum laden and axle weights compatible with
reasonable safety to the Transport commissioner. The
Transport Commissioner, may, then approve the design
and call for as many as extra copies of the approved types
of the design, specifications and calculations as may be
required by him for sending them to different Registering
Authorities for their record.
(3) The maximum fee which may be charged by the
Institute for such checking of a design shall be (Rs.500).
The fee shall be paid by the applicant to the Principal and
Secretary of the Institute direct on demand by him and
shall not be refunded.
(4) Notwithstanding anything contained in sub-rule (1), (2)
and (3) the approval of the design of a trailer
Manufactured in India by a Competent Authority in any
other States in India shall be deemed to be an approval
accorded under these rules:
Provided that, there is in force in that other State, a rule or
rules confirming to or containing substantially the same
provisions as in this rule.
SPECIAL RULES APPLICABLE TO TRAILERS
7.46. Provision as to trailers.- No trailer other than the
trailing half of an articulated vehicle shall be attached to a
public service vehicle.
7.47. Prohibition and restriction on use of trailers with
motors cycle and invalid carriages.- (1) A motor cycle
with not more than two wheels with a side-car shall not
draw a trailer.
(2) A motor cycle with not more than two wheels without
a side car shall not draw a trailer unless the combination
complies with the following requirements:
i. The connection of the trailer to the motor cycle
behind the apex of the rear tyre, of, or within, the
wheel base;
ii. The trailer-motor cycle connection shall allow the
motor cycle complete freedom of movement in the
lateral plane. It shall rotate freely about the vertical
axis preferably through 180 degrees;
iii. The motor cycle remains always in a vertical or in a
lined place without the rider having to balance it.
7.48. Prohibition of attachment of Trailer to certain
vehicles.- No Motor vehicle which exceeds 8.4 meters in
length not being a motor vehicle used for towing a
disabled motor vehicle shall draw a trailer.
7.49. Restriction on number of trailers to be drawn.-
(1) No tractor shall draw more than three trailers:
(2) No tractor shall draw on a public road:
i. A trailer exceeding half metric ton in weight unladen
and fitted with solid steel wheels less than 60
centimetres in diameters, and
ii. a discharrow without trolly wheels used as training
implements behind a tractor.
(3) No other goods vehicle shall draw more than one
trailer.
7.50. Attemdants on Trailer.- (1) Where a trailer is or
trailers are being drawn by a motor vehicle, there shall be
carried in the trailer or trailers or on the drawing motor
vehicle, as the case may be, the following persons, not
being less than twenty years of age and competent to
discharge their duties, that is to say:
(a) if the brakes of the trailers cannot be operated by the
driver of the drawing motor vehicle or by some other
person carried on that vehicle:
i. one person on every trailer competent to apply the
brakes; and
ii. one person placed at or near the rear of the last trailer
in train in such a position as to be able to have a
clear view of the road in rear of the trailer to signal
to the drivers of overtaking vehicles and to
communicate with the driver drawing motor
vehicles;
(b) If the brakes of the trailer can be operated by the driver
motor vehicle or by some person carried on that vehicle,
such other person in addition to the driver shall be carried
on that vehicle and one person on the last trailer in train in
accordance with the provisions of sub-clause (ii) of clause
(a).
(c) if the trailer is or trailers are being drawn by tractor the
unladen weight of which exceeds 7,250 kilograms, not
withstanding that the brakes of the trailer or trailers can be
operated by the driver or some other person on the tractor
not less than one person on each trailer & not less than two
persons on the last trailer in train one of whom shall be the
person required by the provisions of sub-clause (ii) of
clause (a).
(2) this rule shall not apply:
(a) to any trailer having not more than two wheels and not
exceeding 771 kilograms in weight laden when used single
and not in a train with other trailers;
(b) to the trailing half of an articulated vehicle;
(c) to any trailer used solely for carrying water for the
purpose of the drawing vehicle when used singly and not
in a train with other trailers;
(d) to any agricultural or road-making or road-repairing or
road-cleaning implement drawn by a motor vehicle; or
(e) to any closed trailer specially constructed for any
purpose and specifically exempted from any or all of the
provisions of this rule by an order in writing made by the
Registering Authority to the extent so exempted.
7.51. Restriction on length of Train of Vehicle and
Trailers.- The sum total of the length of any vehicle and
its attached trailer or trailers shall not exceed 23 meters.
7.52. Distinguishing mark for Trailers.- (1) No person
shall drive, or suffer or cause to be driven, in any public
place any motor vehicle to which a trailer is or trailers are
attached unless there is exhibited on the back of the trailer
or of the last in the Form R.S. 7.2 set out in the diagram in
retro-reflective red colour and white back ground.
(2) The mark shall be kept clean and unobscured and shall
be so fixed to the trailer that:
(i) the letter on the mark is vertical and easily
distinguishable from the rear of the trailer;
(ii) the mark is either on the centre or to the right
hand side of the back of the trailer; and
(iii) no part thereof is at a height exceeding one
hundred and twenty centimeters from the
ground.
(3) this rule shall not apply to the case referred to
corresponding in clauses (a), (b), (c) and (d) of sub-rule
(2) of rule.
7.53. Special rules for heavy goods and passenger
motor vehicles attendant.- The driver of a heavy goods
and passenger motor vehicle shall be accompanied by an
attendant who shall be in a position to give warning of
any traffic approaching from the rear and shall assist the
driver by giving signal when the motor vehicle is being
taken in reverse.
SPECIAL RULES APPLICABLE TO GAS
PRODUCERS INSTALLED IN MOTOR VEHICLE
7.54. ‘Producer’ defined.- In these rules, otherwise
expressly stated ‘producer’ means the whole of the
generator, pipes coolers, filters and accessories necessary
for the generation of gas and its supply to the engine.
7.55. Conditions of fitting producers to vehicles.- on and
after the coming in to force of these rules, no producers
shall be fitted to a motor vehicle unless the producer-
(a) has been made by a manufacturer approved in this
behalf by the Government;
(b) Is of a type of model approved by, and in
accordance with specifications approved by the
Government for use on the type of vehicle
concerned;
(c) Has affixed to the generator in such a manner as to
be clearly visible, a metal plate having legibly
displayed upon it the names of manufacture, the
manufacturer’s serial number and the description,
name mark or number assigned to it by Government
under sub-rule (1) of rule 7.64.
7.56. Approval how obtained.- (1) Any person seeking
the approval of the Government under rule 7.6 shall make
application in writing accompanies by duplicate copies of
the specification, of clear drawings or prints of the
producer and of the instructions for working it, and shall
state the type or model of the motor vehicle, and the sixe
and horse power of the engine, for which, the producer is
intended.
(2) if so required by the Government, a person who has
made an application under sub-rule (1) shall:
(a) Submit the producer to such test in such laboratory
or work-shop and by such person as the Government
may specify, and
(b) Furnish at his own expense a vehicle fitted with
the producer for such test in the road ( including a
road journey of not less than 80 K.M. continuous) as
the Government may specify.
7.57. Procedure after approval.- (1) When the
Government approves of any type or model of producer, it
shall inform the applicant in writing accordingly and shall
intimate the description, name, mark or number under
which it may be offered for sale.
(2) No person shall sale or offer for sale any producer
which does not conform in every material respect to the
specification approved by Government on the generator in
accordance with clause (c) of rules 7.62.
(3) A manufacturer who proposes to modify or alter in any
way, the design of specification of an approved type or
model of producer shall, before offering the modified type
or model for sale, make application to the Government
with particulars of the modification or change proposed
and shall obtain the approval of the Government thereto.
(4) Upon receipt of an application under sub-rule (3) the
Government may, if it thinks fit, require the modified type
of model to be more subjected to the tests specified in sub-
rule (2) of rule 7.63.
7.58. Government to satisfy that design, etc. of
producers and according to rules.- (1) Before according
approval to any type or model of producers, the
government shall satisfy itself that the design and
construction thereof as proposed are in accordance with
the provisions of these rules and in particular that:
(a) The design is reasonably simple and suitable to the
type of the vehicle for which it is intended and is
such that it can be fitted to the vehicle in a way so as:
i. Not to impede the driver’s vision and control of
the vehicle.
ii. Not to endanger the convenience and safety of
passenger.
iii. To enable the reasonable distribution of the
weight of the producer over the chassis; and
iv. To enable the fitting in readily accessible place
of the filter, coolers, pipes and other parts
requiring frequent clearing and attention;
(b) The effective capacity of the generator, hopper
and filters is sufficient to provide fuel to propel the
vehicle for a distance of not less than 80 miles
without recharging its hopper or clearing the filters;
(c) The producer is capable of providing gas to propel
the vehicle by the gas along a level road with its full
lawful load at a sustained rate of speed of not less
than:
(i) In the case of a goods vehicle not being a heavy
transport vehicle, 32 kilo meters per hour.
(ii) In the case of a goods vehicle, being a heavy
transport vehicle, 24 kilo meters per hour.
(iii) In any other case, 40 k.m. p.h.
(d) The material and methods of construction
specified by the applicant are, save as otherwise
declared by the applicant, calculated to withstand fair
wear and tear for a period of not less than two year
under the normal conditions of working of the type
of vehicle for which the producer is intended.
(2) The instructions for the working of the producer shall
be subject to the approval of the Government which shall
cause to be endorsed thereon a statement of the material
and parts declared by the applicant not to be calculated to
withstand two years fair wear and tear.
7.59 Copy of instruction to accompany of sale of
Producer.- A copy of the instructions for the working of
the producer as approved and endorsed under sub-rule (2)
of rule 7.65 and bearing upon it the particulars specified in
clause (c) of rule 7.62, shall be attached to, or tendered
with every producer offered for sale.
7.60. Design of producer.- Every producer shall be
designed manufactured, fitted and maintained with all
reasonable care necessary to prevent damage to the engine
of the vehicle to which is fitted and from fire, gas
poisoning, and burns and in particulars:
(a) all gas filters shall be properly fitted and kept clean
and shall not be removed or interfered with in any way
likely to cause injury to the engine or the vehicle to
which it is fitted.
(b) all pipes, joints, valves, and all covers to the
hoppers, generators cooling chambers, filters and other
accessories shall be free from gas or air leaks, and
(c) if an escape funnel is fitted to the generator for use
during the blowing of air through the generator, the
mouth of the funnel shall be placed above the level of
the roof of the vehicle.
7.61. Fixing of producer.- (1) No part of any producer
shall be placed so as to reduce the field or vision of the
driver by means of the mirror prescribed in rule 7.3 or
otherwise, or so as to impede the driver in his control of
the vehicle.
(2) In a public service vehicle;
(a) no part of the producer shall be placed within the
passenger’s compartment; and
(b) the generator shall be placed in the rear or at the
side shall be recessed into the passenger’s compartment
and shall be property isolated and heat insulated and
have the clearance prescribed in rule 7.69.
Provided that notwithstanding the provisions of rule the
generator and a reserved of fuel not exceeding 75 K.G.
in weight, may be carried on a trailer attached to a
public service vehicle.
(3) No public service vehicle fitted with a producer
shall have any opening or door in the rear end of the
vehicle.
(4) In a transport vehicle other than a public vehicle
service, the generator shall not be placed forward of the
rear of the driver’s seat and shall be insulated and have
the clearance prescribed in rule 7.69.
7.62. Should it not be seat.- (1) On any motor vehicle
if any part of the generator is so placed as to be within
a distance of 15 centimeter in a horizontal place from
any part of the vehicle, the vehicle shall be insulated
from the generator by a sheet of asbestos one eight of
26 c.m. thick or by such other insulating material as the
Government may be general or special order in writing
specify in this behalf, not less in height than to height of
the generator (including the hopper) and of such a width
as:
(a) Where the generator is recessed, completely to
line the recess, and
(b) Where the generator is not recessed, the project
for a distance of not less than 15 centimeter on
either side of the generator.
(2) No parts of a generator shall have a clearance between
it and the insulating material prescribed in sub-rule (1) of
less than 6 cm.
7.63. Generator.- (1) In the case of a goods vehicle, the
generator may be placed at the rear or side of the vehicle,
as prescribed for a public service vehicle, or behind the
driver’s seat.
(2) When the generator is placed behind the driver’s cab,
it shall be adequately enclosed in a separate compartment
and no goods shall be carried in that compartment.
7.64. Position of generator.- No generator and no pipe
connecting the generator to the gas filters shall be so
placed that the distance between any part of the generator
or pipe is less than 121 centimeter from the filling point or
office of the petrol tank unless the generator or pipe is
efficiently screened by an adequate hear insulated
partition.
7.65. position of filters and gas coolers.- On any
transport vehicle the filters and gas coolers shall be so
placed as to be readily accessible for cleaning at any time.
7.66. Producer to be firmly fixed.- Every part of the
producer shall be firmly and securely fixed in place, and
all valves, joints and hoppers lids or covers shall at all
times be maintained in a gas tight condition.
7.67. Instructions for driver or person incharge.- No
driver or other person incharge of a motor vehicle to
which a producer is fitted shall:
(a) at any time when there if fire in the generator, cause
or allow the vehicle to stop or remain stationary at a
distance or not of less than 20 meters from any petrol
pump or place where petrol is supplied in tins;
(b) at any time when there is fire in the generator, pour
petrol or cause or allow petrol to be poured into the petrol
tank;
(c) carry, or cause or allow to be carried, in the vehicle
(save in the regular petrol tank thereof) any petrol or other
inflammable or explosive substance;
(d) clean or take out the generator at any appointed bus
stand or stopping place or within a distance of not less
than 20 meters from any other motor vehicle, or cause or
allow the same to be one by any person;
(e) Where a park, bus stand, or halting place or a part of
a park, bus stand or halting place is set apart for
vehicle fitted with producers, allow the vehicle to
stop or remain stationary in any other park, bus stand
or halting place or other part thereof as the case may
be;
(f) Place the vehicle or allow it to be placed, in any
garage or shed unless the garage or shed is provided
with a permanent opening or opening for sufficient
ventilation other than doors and window that may be
closed.
7.68. Projection of producer.- (1) The projection of any
part of a producer beyond the rear of the vehicle shall be
deemed, not to be a part of the vehicle for the purposes of
Central Motor Vehicle Rules, 1989 in regards overall
length and overhang.
(2) No producer shall be fitted to any motor vehicle in
such a way that the vehicle thereby contravenes the
provisions of Central Motor Vehicles Rules, 1989 in
regards overall width and overall light.
7.69. Any officer authorized by Government in this
behalf may time.- (1) Inspect any motor vehicle fitted
with a gas producer for the purpose of seeing that the
producer is of an approved type and is fitted in accordance
with these rules, and that the gas filter and other parts are
properly cleaned and maintained;
(2) Enter into and inspect any premises where producer
gas plants are either manufactured and the materials used
in the manufacture thereof are of the approved
specifications, and/or that the plant is fitted in accordance
with these rules.
7.70. All applications in respect of the manufacture and
approval of gas producers to be installed in motor vehicle
should be made to the secretary to Government in the
Transport Department.
7.71. No certificate of fitness shall be be issued or
renewed or under rule 4.18 in respect of vehicle fitted with
a gas plant unless the plant, and the fitting of the plant to
the vehicle, have been inspected tested and passed by an
officer authorized by Government under rule 7.69 and the
certificate has been endorsed by him to this effect.
No fee is payable for this inspection.
SPECIAL RULES LAYING DOWN
SPECIFICATIONS FOR MOTOR CYCLE,
RICKSHAW AND TEMPO BODIES
7.72. Type of body and Material.- (1) (a) The body of
every auto Rickshaw shall be either of a station wagon or a
box type or hackney carriage type, as approved by the
State Transport Authority, soundly constructed to the
satisfaction of the registering authority and shall be
securely fastened to the frame of the vehicle. There shall
be adequate arrangements for protection of passengers
from sun, wind and rain. The material used in the
construction shall be strong and of good quality.
(b) The body of every tempo shall be constructed to
the satisfaction of registering authority and shall be
securely fastened to the frame of the vehicle. There should
be adequate arrangement for protection of passenger from
sun, wind and rain. The material used in the construction
shall be strong and of good quality.
(2) The roof shall be so constructed as to provide
protection for passengers from sun and rain, and shall be
either of metal sheeting or canvass or some other suitable
materials.
7.73. overhang.- The overhang of the body shall not
exceed forty one percent of the distance between the plane
perpendicular to the axis of the auto rickshaw which
passes through the centre of the front wheel and the centre
of the rear axle.
7.74. Over all width.- 4 passengers auto rickshaw and
tempo.- (1) Overall width measured at right angles to the
axis of the planes enclosing the extreme points, shall be
not more than 176 cm. and not less than 124 cm.
(2) 3 passengers auto rickshaw.- The overall width
measured to right angles to the axis of the planes enclose
in the extreme point shall not be more than 158 cm. and
less than 122 cm.
(3) 2 passengers auto rickshaw.- The overall width
measured at right angles to the axis of the planes enclosing
the extreme point shall be not more than 142 cm. and less
than 106 cm.
7.75. overall height-4 passengers auto rickshaw.- (1)
The overall height measured from the surface on which
auto rickshaw stands shall not exceed 183 cm. and there
shall be least 122 cm. clear head space between floor
board and the roof.
(2) 3 passengers and 2 passengers auto rickshaw.- The
overall height measured from the surface on which auto
rickshaw stands shall not exceed 183 cm. and there shall
be at least 122 cm. clear head space between floor board
and the roof.
1[(3) Tempo.- The overall height measured from the
surface on which tempo stands shall not exceed 180 cm.
excluding the height of the luggage carrier, of provided
and there shall be at least 122 cm. clear head space
between floor board and the roof.]
7.76. Road Clearance.- The Road clearance of every auto
rickshaw shall not be more than 20 cm. and not less than
10 cm.
7.77. Clearance of floor board.- (1) 4 passengers auto
rickshaw .- The floor board shall be not less more than 56
cm. above the surface on which the auto rickshaw stands.
(2) Passenger: auto rickshaw.- The floor board shall be
not more than 56 cm. above the surface on which the auto
rickshaw stands.
7.78 Lights.- Every auto rickshaw and Tempo shall be
fitted with the head and tow side white lights on the body
in the front.
In addition to the front lights, an auto rickshaw shall be
fitted with the rear lamp showing to the rear red light
visible from a distance 167 metres and illuminating with
white light the registration mark exhibited on the rear of
the vehicle, so as to render it legible from a distance of 17
metres and also 2 cat’s reflectors on the rear mud-guards,
so as to warn vehicular traffic approaching from behind
that there is an auto rickshaw ahead. If no mud-guards, are
used, cat’s eye reflectors in the rear will be optional.
7.79. Driver’s seat and Cabin.- (1) The back of the
driver’s seat should have at least 112 cm. of clearance
from the front panel of the body. A wind screen shall be
provided for the driver.
(2) In case of a tempo type body there shall be a fixed
partition of the front seat between the driver’s seat and the
passenger’s seats. This will be fixed in such a manner so
as to leave not more than 38 cm. of space for the single
passenger on the front seat. In between the driver’s cabin
and the main seating room, there shall be provided a fixed
partition of horizontal bars in a manner that no passenger
can sit on the partition.
7.80. Gangway.- In every 4 passengers auto rickshaw, the
entrance to which is from the front of rear and seats are
placed across the vehicle there shall be a gangway of not
less than 31 cm.
7.81. Seating room and foot board.- (1) (i) 4 passengers
auto rickshaw.-
There shall be provided for each passenger reasonably
comfortable seating space of not less than 41 cm. square
measured in straight lines along and at right angles to the
front of each seat.
___________________
1. Subs. By G.S.R. 21 dated 26.7.1993, published in Raj. Gazette
E.O. part 4 (Ga) dated 27.7.1990 (w.e.f. 27.7.1993).
The seats shall be placed across the vehicles and
when all seats face in the same direction, there shall be at
all place a clear space of not less than 64 cm. between the
backs of either of the seats and they shall face to the front
or two seats to the front and two to the rear back to back.
Seats along side the body shall not be allowed.
(ii) 3 passengers auto rickshaw.- There shall be
provided a seat not more than 112 cm. and not less than 91
cm. in length. The depth of seat shall not be less than 41
cm.
(2) The back of all seats shall be slanting and closed to a
height of atleast 46 cm. above the level of the seat in both
cases.
(3) The seats shall be provided with fixed of movable
cushions. The cushions shall be covered with leather cloth
of goods quality or other material of such kind that they
are capable of being kept in a clear and sanitary condition.
(4) The height of the seats from the floor shall be not less
than 36 cm. (including cushions.)
1[(5) Tempo.- (a) In the case of a Tempo not more than
two seats of 115 Cm. X 38 Cm. shall be placed across the
chassis, facing each other in the seating room. The seats
and the back of the seats shall be provided with good
cushion and cover. The seat provided for passenger shall
be of not less than 38 cm. X 38 Cm.
(b)The seating room shall be furnished with one or more
electric lights to give adequate illumination and shall be so
screened as not to impair the forward vision of the driver.
(c) The foot board shall be on the left hand side of the
vehicle and shall not exceed 15 Cm. X 15 Cm. and no
passenger shall be allowed to travel standing on the foot
board. No entrance and exit for the passenger except from
the left hand side shall be allowed.]
(6) Leg Space- (i) 4 passengers auto rickshaw.- There shall
be provided atleast 28 cm. leg space.
(ii) 3 passengers and 2 passengers auto rickshaw and
tempos. There shall be provided at least 38 cm. leg space.
2[(7) Tempo registered prior to these rules shall not be
allowed to ply after expiry of two years from the day on
which these rules will come into force, unless the body of
such tempo is constructed/modified to meet the
requirements laid down in these rules.]
7.82. Milometer.- Every auto rickshaw shall be provided
with suitable type of milometer to record total kilometer
covered on the basis of which fare is paid and also a
milimeter of the type in which trip readings can be
adjusted to zero or fare meter.
_______________________
1. Added by G.S.R.21 dated 26.7/1993, published in Raj.
Gazette E.O. Part 4(Ga)(I) dated 27.7.1993, (w.e.f.
27.7.1993).
2. Added by Ibid.
7.83. Horn.- Every auto rickshaw and tempo shall be
fitted with a bulb horn.
1[ 7.84. Overall length.- In case of Tempo the overall
length of the Tempo shall not exceed 420.5 Cms.]
7.85. Colour.- The colour of the lower body and front
portion excluding the border of wind screen shall be
black and the rest portion including the border of wind
screen shall be yellow.
7.86. Exemption by State Government.- The State
government, may in public interest or for sufficient
reasons, by notification in the Rajasthan Gazette,
exempt to such extent as may be specified in the
notification, any motor vehicle or class of motor
vehicles from all or any of the provisions of the Rules
contained in this Chapter for specified purposes or
areas, if it is satisfied that such vehicle or vehicles can
be used in a public place without any danger to public
safety.
7.87. Exemption of road plant.- Nothing in rules 7.3,
7.5 and 7.34 shall be apply to road rollers and other
machines of roads.
----
1.Subs by G.S.R. 21 dated 26.7.1993, published in Raj.
Gazette E.O. Part 4(Ga)(I) dated
27.7.1993(w.e.f.27.7.1993).
Raj. Motor Vehicle Rules, 1990
CHAPTER VIII
CONTROL OF TRAFFIC
2[8.1. District Collector and District Magistrate to restrict speeds, weight, etc.-
District Collectors and District Magistrate in their respective Jurisdiction shall have the
power.-
(i) to impose speed limits,
(ii) to impose limits on the laden weight or dimensions of motor vehicles, and to
prohibit or restrict the use of motor vehicle generally or of a particular class or
of trailers in a specified area or in respect of any road, and
(iii) to designate any road as a main road or to declare any area as parking area or
parking place or to restrict vehicles to park in a specified area.]
8.2. Authorities empowered to erect traffic signals.- (1) The District Collector and
District Magistrate shall be the authority authorized to cause of permit traffic signs to be
placed or erected in any public place for the purpose of regulating motor vehicle traffic
within their respective jurisdictions.
(2) Any authority empowered to specify the maximum safe load for bridge or culvert
or to close a public road or street may also for the purpose of exercising the said power
erect the appropriate traffic signs.
8.3. Weighing for vehicles.- (1) Any officer referred to in sub-rule (2) may, if he has
reason to believe that a goods vehicles is being used in contravention of any laden weight
restriction imposed by competent authority, require the driver to convey the vehicle to a
weighing device, of any within distance of ten kilometer from any point on the forward
route or within a distance of twenty kilometer from the destination of the vehicle, for
weighing, direct the driver to convey the vehicle to a suitable place to be specified in the
notice and he may by order in writing, direct the driver to off load the excess weights at his
own risk and no to remove the vehicle from that place until the laden weight axle weight
has been reduced so that it complies with such restrictions 1[The weighing charges shall be
borne by vehicle owner/ in charge]
2[(2) Transport Officer not below the rank of Motor Vehicle Sub-Inspector is
authorized to require the weighing of goods vehicles and trailers.
--------
1.Substituted by G.S.R. 21 dated 26.7.1993, published in Raj. Gazette E.O. Part 4 (Ga) (I) dated
27.7.1993,(w.e.f.27.71993).
2.Subs. By G.S.R. 82 dated 29.11.2002, pub. In Raj. Gazette E.O. Part 4 (Ga) (I) dated 29.11.2002.
Raj. Motor Vehicle Rules, 1990
2[8.4 Officers empowered to demand production of registration Certificate.-
Transport Officer not below the rank of a Motor Vehicles Sub-Inspector are authorized to
demand the production of the Certificate of Registration of any vehicle, and where the
vehicle is a transport vehicle, the certificate of fitness also.]
8.5. Officer empowered to demand information.- Police Officers not below the
rank of a Sub-inspector are authorized to demand from the owner of a motor vehicle, the
driver of which is accused of any offence under the Act all information regarding the name
and address of and the license held by the driver which is in his possession or could by
reasonable diligence be ascertained by him.
8.6. Officers empowered to inspect vehicles involved in accident.- Transport Officers not
below the rank of an Inspector of Motor Vehicles and Police Officers not below the rank of
a Sub-Inspector are authorized to inspect any motor vehicle involved in an accident and for
that purpose to enter at any reasonable time any premises where the vehicle may be to
remove the vehicle for examination.
8.7. Vehicles abandoned on the road-removal and custody.- (1) If any motor vehicle is
allowed to stand in any place other than a duly appointed parking place in such a way as to
cause obstruction to traffic or danger to any person, any Police Officer or any Officer of
Motor vehicle department not below the rank of motor vehicle inspector may:
(i) forthwith cause the vehicle to be moved under its own power of otherwise to
the nearest place where the vehicle will not cause any obstruction or danger,
(ii) unless it is moved to a position where it will not cause obstruction or danger,
take all reasonable precautions to indicate the presence of the vehicle; and
(iii) if the vehicle has been stationary in one place for a continuous period of ten
hours and adequate steps have not been taken for its repair or removal by the
owner or his representative remove the vehicle and its contents to a place of
safe custody.
1.subs.by ibid
(2) Vehicles abandoned on the road.- If a motor vehicle remains in any public place
without a driver or the person incharge and a Police Officer or Transport Officer has reason
to believe that the vehicle is danger of being damaged by reason of the absence of the driver
or other person incharge such officer may take charge of the vehicle and remove it or cause
it to be removed to lany pace or safe custody.
Raj. Motor Vehicle Rules, 1990
(3) Vehicles in parking place removal.- If a motor vehicle remains or has been
stationary in a duly appointed parking place for a period exceeding that specified by
competent authority in respect of the said place, or, if no such period has been specified for
a period exceeding six hours, any Transport of police Officer may remove the vehicle to a
place of safe custody.
(4) Payment of removal.- Notwithstanding any fine or penalty which may be
imposed upon any person upon conviction for the contravention of the provisions of section
122 of the Act or of any regulations made by a competent authority in relation to the use of
duly appointed parking places, the owner of the motor vehicle of his heirs of assigns shall
be liable to make goods any expense incurred by any Transport or Police Officer in
connection with the moving, lighting, watching or removal of a vehicle or its contents in
accordance with sub-rules (1),(2) and (3) and any Transport Officer or Police Officer or any
person into whose custody the vehicle has been entrusted by any such officer, shall be
entitled to detain the vehicle until he has received payment accordingly and shall, upon
receiving such payment give a receipt to the person making the payment.
8.8. Installation and use of Weighing Devices.- (1) A weighing device for the
purpose of section 114, may be-
(i) a weigh-bridge installed and maintained at any place by or under the order of
the Govt. or a local Authority or a railway administration;
(ii) a weigh-bridge installed and maintained by any person and certified by the
Registering Authority to be a weighing device for the purpose of the Act and
these rules; or
(iii) a portable wheel weigher of any kind approved by the (State) Government.
1[(1-A) For weighment of vehicle at the weighbridge, installed or maintained by or under
the order of the State Government, such fee shall be charged as may be specified by the
State Government from time to time.]
------
1. Ins. by noti No. F7(273) Pari/rules/h.q/ 2007, G.s. R 92 dated01-02-2008 (pub. in Raj. Gaz. Ex-ord,
Part-4(Ga)(I) dated 01-02-2008)
(2) The driver of any goods vehicle shall upon demand by a competent authority, not
below the rank of Sub–Inspector of Motor Vehicles, driver and manipulate the vehicle so as
to place it or any wheel or wheels thereof, as the case may be, upon any weigh bridge or
wheel weigher in such a manner that the weight of the vehicle or the weight transmitted by
any wheel or wheels may be exhibited by the weight bridge or wheel weigher.
(3) If the driver of a motor vehicle fails within a reasonable time to comply with a
requisition under sub-rule (2), an officer not below the rank of Inspector of Motor vehicles
Raj. Motor Vehicle Rules, 1990
may cause any person, being the holder of a licence authorizing him to drive the vehicle, so
to drive and manipulate the vehicle.
(4) When the weight or axle weight of a motor vehicle is determined by separate
and independent determination of the weight transmitted by any wheel or wheels of the
vehicles, the axle weight and the laden weight of the vehicle shall be deemed to be sum of
the weights transmitted by the wheels of any axle or by all the wheels of the vehicle, as the
case may be.
(5) Upon the weighment of a vehicle in accordance with section 114 and this rule,
the person who has required the weighment or the person who has required to the
weighment or the person in charge of the weighing device shall deliver to the driver or other
person in charge of the vehicle a statement in writing of the weight of the vehicle and of any
axle, the weight of which is separately determined.
(6) The driver or other person in charge of, of the owner of a vehicle which has been
so weighed may challenge the accuracy of the weighing device by a statement in writing
accompanied by a deposit of twenty rupees delivered:-
(i) within the one hour of the receipt of the statement referred to in sub-rule (5),
to the person by whom the statement was delivered to him; or
(ii) within fourteen days of the service on him of notice of proceedings against him
under section 113, to the court issuing such notice.
(7) Upon receipt of a statement challenging the accuracy of weighing device under
sub-rule (6) the person or the court by whom the statement is received shall write to the
Registering Authority, for the weighing device to be tested, by an Inspector of weights and
Measures and the certificate of such Inspector regarding the accuracy of the weighing
device shall be final.
(8) If, upon the testing of a weighing device under sub-rule (7), the weighing device
is certified to be accurate or to be inaccurate to an extent less than any weight by which the
laden weight or unladen weight of the vehicle is shown in the statement referred to in sub-
rule (5) to have exceeded the registered unladen weight, as the case may be, a
contravention of sub-section 113 shall be deemed to have been proved.
(9) If, upon the testing of a weighing device as aforesaid greater than any weight by
which the laden weight or unladen weight of the vehicle is shown in the statement referred
to in sub-rule (5) to have exceeded the registered laden weight or the registered unladen
weight, as the case may be, no further proceedings shall be taken in respect of any such
laden weight or unladen weight. If the device is certified to be inaccurate to the said extent
Raj. Motor Vehicle Rules, 1990
in respect of every such laden weight or unladen weight or unladen weight actually
weighed, the deposit prescribed in sub-rule (6) shall be refunded.
(10) No person shall, by reason of having challenged the accuracy of any weighing
device under sub-rule (6) be entitled to refuse to comply with any order in writing under
section 114.
8.9. Ghat Roads-restriction on driving with gear disengaged.- On any ghat road
and elsewhere on any hill, marked by traffic sign, No. C-8 and C-9 of schedule to the Act,
no person shall drive any motor vehicle with the engine free, that is to say, with the gear
level in neutral, the clutch lever depressed or with any free wheel or other device in
operation which frees the engine form the driving wheels and prevents the engine from
acting as brake when the vehicle is travelling down on an incline.
Explanation.- “Ghat or Hill” means a road notified in the Rajasthan Gazette as such
by the Government and indicated by a notice board effected at each end of such road.
8.10. Prohibition of mounting or dismounting when vehicle is in motion.- (1) No
person shall mount or attempt to mount on, or dismount from any motor vehicle, other than
a motor cycle when the motor vehicle is in motion, nor shall the driver or person incharge
of such vehicle, permit any person to do so.
(2) Prohibition of taking hold of vehicle in motion.- No person shall take hold of,
and no driver of a motor vehicle shall cause or allow any person to take hold of, any motor
vehicle when in motion for the purpose of being towed or drawn upon some other wheeled
vehicle or otherwise.
8.11. Towing.- (1) No vehicle other than mechanically disabled or incompletely
assembled motor vehicle, a registered trailer or a side car shall be drawn or towed by any
motor vehicle.
(2) Licensed driver to be in drawn vehicle.- No motor vehicle shall be drawn or
towed by any other motor vehicle unless there is in the drivers, seat of the motor vehicle
being drawn or towed a person holding a licence authorizing him to drive the vehicle or
unless steering wheel of the motor vehicle being towed is firmly and securely supported
clear or the road surface by some crane or other device on the vehicle which is drawing or
towing it.
(3) “On tow” to be displayed- When a motor vehicles being towed by another motor
vehicle, the clear distance between the rear of the front vehicle and the front of the rear
vehicle shall at no time exceed 5 meters steps shall be taken to render the two rope or chain
easily distinguishable by other users of the road, and there shall be clearly displayed on the
rear of the vehicle being towed in black letters not less than seventy five millimeter high
Raj. Motor Vehicle Rules, 1990
and on a white back ground the words “On Tow”, provided that no person shall be liable to
be convicted for the contravention of the rule for failure to display the words “On Tow” if
the motor vehicle which is towing the other is not a motor vehicle adapted and ordinarily
used for the purpose and so long as the vehicle is being towed between the place of the
breakdown and the nearest place on the route at which the necessary materials can be
obtained.
(4) Speed of towing vehicles.- No motor vehicle when towing another vehicle other
than a trailer or side car shall be driven at a speed exceeding 20 km. per hours.
8.12. Driving of tractors on Roads.- (1) No tractor, when fitted for being driven on
a public road shall be driven on such road at a speed exceeding ten kilometers per hour and
no such tractor shall take sharp turns on such road:
Provided that, if such tractor be a crowler tractor, it shall not be driven on an asphalt
road between 9.00 A.M. to 9.00 P.M.
(2) Every such tractor, when driven on a metalled road, shall be driven as far as
possible on the side stripes of such road.
8.13. Footpaths, cycle bracks and traffic segregation.- Where any road or street is
provided with footpaths or tracks reserved for cycles or specified classes of other traffic, no
person shall, save with the sanction of a police Officer in uniform, drive any motor vehicle
or cause or allow any motor vehicle to be driven on any such footpath or track.
8.14. Projection of Loads.- (1) Nothing shall be placed or carried upon the outside
or the roof of a double decked service vehicles.
(2) No person shall drive, and no person shall cause, or allow to be driven, in any
place (public) any motor vehicle which is loaded in manner likely to cause danger to any
person or in such a manner that the road or any part thereof or anything extends:-
(i) laterally beyond the side of the body or beyond a vertical plane in prolongation
of the side of the body.
(ii) to the front beyond the foremost part of the load body of the vehicle,
(iii) to the rear beyond the rearmost part of the vehicle excluding any luggage
carrier.
(iv) In height by a distance which exceeds 3.66 meters in case of a goods vehicle
and 3.4 meters in case of a goods vehicle and 3.4 meters in case of any other
motor vehicle from the surface upon which the motor vehicle rests.
(3) Clause (iii) of sub-rule (2) shall not apply to a goods motor vehicle when
Raj. Motor Vehicle Rules, 1990
loaded with any pole or other projecting thing so long as,-
(i) the projecting load falls within the limit of the body of a trailer being drawn by
the goods vehicles or;
(ii) the distance by which the pole or other thing projects beyond the rearmost
point of the motor vehicle does not exceed 1.85 meters; and
(iii) there is attached to the rear of such pole or other thing in such a way as to be
clearly visible from the rear at all times a white circular disc of not less than 38
centimeters in diameter; and during the period commencing half an hour after
sunset and ending half an hour before sunrise, a lamp in addition to the
prescribed lamps on the vehicle so arranged as to show a red light to the rear,
and also a circular disc of not less than 38 centimeters in diameter painted in
retro reflected red colour so that the same will be illuminated in the light of the
vehicle approaching from the rear.
(4) Transport Commissioner may, by order in writing, exempt any motor vehicle for
such purpose, for such period and subject to such conditions as may specify, from any or all
of the provisions of this rule on applications submitted in Form R.S. 8.1.
(5) The registered owner of the vehicle may apply for exemption to the Transport
Commissioner of State by him in whose jurisdiction the motor vehicle will start journey in
the State or enter the State and shall obtain the exemption under sub-rule (4) prior to the
entry in the State.
(6) While granting exemption under sub-rules (4) & (5), the Transport
Commissioner shall consult the authority of the Public Works Department and NHAI the
State traffic Police and only if satisfied such exemption will not cause any danger to any
bridge or obstruction to traffic or danger to other vehicles or passengers Travelling in other
vehicles, shall grant such exemption.
(7) Such exemption under sub-rule (4) or (5) shall be granted in Form R.S. 8.2 and
copies thereof would be dispatched to the registering authorities through whose jurisdiction
the motor vehicle will travel.
8.15. Dangerous substances-Restrictions as to carriage of.- (1) Except for the fuel
and lubricants necessary for the use of the vehicle, no explosive, highly inflammable
otherwise dangerous substance, shall be carried on any public service vehicle unless it is so
packed that even in the case of an accident to the vehicle it is unlikely to cause damage or
injury to the vehicle or person carried thereon.
(2) Authority to remove explosive from vehicle.- If in the opinion of any
Transport Officer not below the rank of an Inspector , any public service vehicle or any
Motor vehicle is at any time loaded in contravention of sub-rule(1) he may order the driver
or other person in-charge of the vehicle to remove or repack the explosive or inflammable
or otherwise dangerous substance and till such time shall not allow the public service
vehcile or the motor vehicle to continue its journey.
Raj. Motor Vehicle Rules, 1990
8.16. Sound signals-restriction on use of.- (1) No driver of a motor vehicle shall
sound the horn or other device for giving audible warning, with which the motor vehicle is
equipped, or shall cause or allow any other person to do so, to an extent beyond that which
is reasonably necessary to ensure safety.
(2) Authority to prohibit sound signals.- The Transport Commissioner or the
District Magistrate may by notification in the Rajasthan Gazette and by the erection in
suitable place of traffic sign No. M 18 as set forth in Schedule to the Act, prohibit the use of
any horn ioning or other device on a motor vehicle for giving audible warning within such
locality and during such hours, as may be specified in the notification:
Provided that when the Transport Commissioner or the District Magistrate, as the
case may be, prohibits the use of any horn, ioning or other device for giving audible
warning during certain specified hours, he shall cause a suitable notice setting forth the
hours within which such use is so prohibited to be affixed below the traffic signs.
8.17. Cut outs-Prohibition of.- No driver of a motor vehicle shall in any public
place make use of any cut out or other device by means of which the exhaust gases of the
engine are released, save through the silencer.
8.18. Dazzling lights-restriction of.- (1) The driver of a motor vehicle shall at all
times when the lights of the motor vehicle are in use so manipulate them that danger or
undue inconvenience is not caused to any person by dazzle, shall not use the mercury or any
bulb which gives dazzling light.
(2) The Transport Commissioner or the District Magistrate may by notification in the
Rajasthan Gazette and by the erection of suitable notice in English and in Hindi prohibit the
use, within such areas or in such places, as may be specified in the notification, of direct
head lights.
8.19. Restriction on Travelling Backwards.- No driver of a motor vehicle shall
cause the vehicle to travel backwards without first satisfying himself that he will not
thereby cause danger or undue inconvenience to any person or any circumstances, save in
the case of a road roller, for any greater distance or period of time than may be reasonably
necessary in order to time the vehicle round.
8.20. Use of lamps when a vehicle is at rest.- (1) If within the limits of any
Municipality, a motor vehicle is at rest within the hours during which lights are required, at
the left hand side of any road or street or elsewhere in any duly appointed parking place, it
shall not be necessary for the motor vehicle to exhibit any light save as may be required
generally or specifically by the District Magistrate.
(2) Outside the limits of any, Municipality if a motor vehicle is at rest within the
hours during which lights are required in such a position as not to cause danger or undue
inconvenience to other users of the road, it will not be necessary for the motor vehicle to
display any lights.
Raj. Motor Vehicle Rules, 1990
8.21. Visibility of lamps and registration marks.- (1) No load or other thing shall
be placed on any motor vehicle so as at any time to mark or otherwise interrupt vision of
any lamp, registration mark or other mark required to be carried by or exhibited on any
motor vehicle by or under the provisions of the Act, unless a duplicate of the lamp or mark
so marked or otherwise observed is exhibited in the manner required by or under the Act for
the exhibition of the masked or obscured lamp or mark.
(2) Registration and other marks to be kept in clear condition.- All registrations
and other marks required to be exhibited on a motor vehicle by or under the provisions of
the Act, shall at all times be maintained as far as may be reasonably possible in a clear and
legible condition.
8.22. Driving mirror obscuring of.- No person driving or incharge a motor vehicle
shall –
(i) permit any person to stand or sit, or
(ii) place or permit any thing to be placed, in such a manner or position as to
obscure the driver’s vision either directly or rear-ward by the mirror referred to in rule 7.3.
Provided that clause (ii) shall not apply to a vehicle fitted with blind on the rear
window when this blind is used during night time.
8.23. Duty to comply with traffic control signals.- (1) Every driver of a motor
vehicle shall, when driving the vehicle in a public place comply with any traffic control
signal given to him by any police officer in uniform for the time being engaged in the
regulation of traffic in such public place.
(2) In this rule “Traffic Control Signed” means traffic control signals as illustrated in
Previous and next
Questions people ask
Is form R.S. 5.30 of THE RAJASTHAN MOTOR VEHICLES RULES, 1990 still in force?
No repeal of the RAJASTHAN MOTOR VEHICLES RULES, 1990 is recorded.