Rule 110, THE CENTRAL MOTOR VEHICLES RULES, 1989: Lamps on three-wheelers 6[ 7[Lamps on three-wheelers]
THE CENTRAL MOTOR VEHICLES RULES, 1989 - Rule 110
Text of rule 110
Lamps on three-wheelers 6[ 7[Lamps on three-wheelers]
110. Lamps on three-wheelers
6[ 7[Lamps on three-wheelers].—Every 8[three-wheeler] shall be fitted with one front head
lamp and 63[two side white or amber lights] or two front lamps on the body. In addition to the front
lamp or side lights, it shall be fitted with 9[two rear lamps showing to the rear red light] visible from
a distance of 75 metres and a white light illuminating the registration mark exhibited on the rear of
the vehicle so as to render it legible from a distance of 15 metres; and also two red reflex reflectors
each having a reflecting area of not less than seven square centimetres:
Provided in case where these vehicles are attached with trailers, the rear fitments mentioned
in this rule and direction indicator system mentioned in rule 102 shall also be provided at the rear of
the trailer:]
10[Provided further that fitment of one head lamp shall be applicable only in case of three-
wheelers with overall width not exceeding 1400 mm and in such cases the side lights shall be amber
in colour.]
____________________________________
1. Inserted by G.S.R. 642(E), dated 28-7-2000 (w.e.f. 28-7-2000).
2. Substituted by G.S.R. 642(E), dated 28-7-2000 (w.e.f. 28-7-2000)
3. The words “three wheelers of engine capacity not exceeding 500 cc” omitted by G.S.R. 589(E),
dated 16-9-2005 (w.e.f. 1-4-2006).
4. Proviso omitted by G.S.R. Ill (E), dated 10-2-2004 (w.e.f. 10-8-2004).
5. Substituted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
6. Substituted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
7. Substituted by G.S.R. 589(E), dated 16-9-2005, for “Lamp on auto-rickshaws and three wheelers
with engine capacity not exceeding 500 cc” (w.e.f. 1-4-2006).
8. Substituted by G.S.R. 589(E), dated 16-9-2005, for “auto-rickshaw and three-wheeler of engine
capacity not exceeding 500 cc” (w.e.f. 1-4-2006).
9. Substituted by G.S.R. 214(E), dated 18-3-1999 (w.e.f. 18-3-1999).
10. Proviso inserted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 1-4-2006).
98
111. Prohibition of spot lights, etc.
No spot light or search light shall be carried on the front of any vehicle except in exceptional
circumstances with the prior approval of the registering authority.
Smoke, Vapour, spark, ashes, grit and oil
112. Exhaust gases
Every motor vehicle shall be so constructed or equipped that the exhaust gases from the
engine are discharged neither downward nor to the left side of the vehicle and shall be so fitted as to
allow the gases to escape to the right side or rear of the vehicle:
Provided that in the case of tankers carrying explosives and inflammable goods, the fitment
of exhaust pipe shall be according to the specification of the Inspector of Explosives:
1[Provided further that in the vehicles where the exhaust gases are discharged to the right of
the vehicle, slight downward angle shall be permitted, provided the exhaust gases do not kick up
any dust when the vehicle is stationary and engine running and in any case the angle of the pipe to
the horizontal should not be more than 30 degrees:
Provided also that where the exhaust gases are discharged to the left of the vehicle the
inclination of exhaust pipe should not cross 30 degrees in downward and 30 degrees in left direction
against the vertical plane which includes the vehicle centre line, provided the exhaust gases do not
take up any dust when the vehicle is stationary and engine running:
2[Provided further that in the case of agricultural tractors, vertical or horizontal] exhaust pipe
may be provided and outlet of this pipe should be so directed that the driver of the tractor is not
exposed to exhaust gases by locating the outlet over or to the side of headlevel of the driver as per
Indian Standards IS: 12239 (Part 1)—1988:]
3[Provided also that in the case of construction equipment vehicle vertical exhaust pipe may
be fitted and outlet of this pipe shall be so directed that the driver of the vehicle is not exposed to
exhaust gases.]
113. Location of exhaust pipes
On and from the date of commencement of this sub-rule, 4[no exhaust pipe of a motor
vehicle including construction equipment vehicle] shall be located within a distance of 35
millimeters from the fuel line connecting to the fuel tank and engine.
_____________________________________________________
1. Substituted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
2. Substituted by G.S.R. 111(E), dated 10-2-2004, for “Provided further that in the case of tractors,
vertical” (w.e.f. 10-8-2004).
3. Inserted by G.S.R. 642(E), dated 28-7-2000 (w.e.f. 28-7-2000).
4. Substituted by G.S.R. 116(E), dated 27-2-2002, for “no exhaust pipe” (w.e.f. 27-8-2002).
99
114. Exhaust pipes of public service vehicles
The exhaust pipe of every public service vehicle shall be so fitted or shielded that no
inflammable material is thrown upon it from any other part of the vehicle and that it is not likely to
cause a fire through proximity to any inflammable material on the vehicle.
115. Emission of smoke, vapour, etc. from motor vehicles
1[(1) Every motor vehicle other than motor cycles of engine capacity not exceeding 70 cc,
manufactured prior to the first day of March 1990, shall be maintained in such condition and shall
be so driven so as to comply with the standards prescribed in these rules.]
2[(2) On and after 1st October, 2004, every motor vehicle operating on—
(i) Petrol/CNG/LPG shall comply with the idling emission standards for Carbon
monoxide (CO) and Hydrocarbon (HC) given in the Table below:—
TABLE
PETROL/CNG/LPG DRIVEN VEHICLES
SI.
No.
Vehicle Type CO % HC(n-hexane
equivalent)
ppm
1. 2 and 3-Wheelers (2/4-stroke) (Vehicles
manufactured on and before 31st
March, 2000)
4.5 9000
2. 2 and 3-Wheelers (2-stroke) (Vehicles
manufactured after 31st March, 2000)
3.5 6000
3. 2 and 3-Wheelers (4-stroke) (Vehicles
manufactured after 31st March, 2000)
3.5 4500
3[4. 4-wheelers manufactured as per pre Bharat Stage-II norms 0. 3 1500
5. 4-Wheelers manufactured as per Bharat Stage II, Barat Stage-III
or subsequent norms
0.5 750]
Note.—The test shall be carried out using the instrument type approved as per rule 116(3) of
the Central Motor Vehicles Rules, 1989 (CMVR) with the vehicle engine warmed up after a run of
minimum 15 minutes on a variable course under normal traffic condition. During the test the
vehicle engine shall be running at idling speed and the sampling probe shall be inserted into the
vehicle exhaust system to a depth not less than 300mm. In case CO and/or HC emission values
recorded during the test are not within the limits, the testing shall be discontinued and the vehicle
owner shall be advised to resubmit the vehicle after repair/service.
____________________________________________.
1. Substituted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
2. Sub-R. (2) substituted by G.S.R. 111(E), dated 10-2-2004 (w.e.f. 10-8-2004) and as
corrected by vide G.S.R. 176(E), dated 5-3-2004
3. Subs. By G.S.R. 276(E), 10th April,2007, for serial NO. 4 and 5 (w.e.f. 10.04.2007)
100
The idling emission standards for vehicles when operating on Compressed Natural Gas (CNG),
shall contain Non-Methane Hydrocarbon (NMHC) in place of Hydrocarbon (HC) and shall be
estimated by the following formula:
NMHC= 0.3xHC
Where HC= Total Hydrocarbon measured as n-hexane equivalent.
Similarly idling emission standards for vehicles when operating on Liquefied Petroleum Gas
(LPG) shall contain Reactive Hydrocarbon (RHC) in place of Hydrocarbon (HC) and shall be
estimated by the following formula:
RHC=0.5 x HC
Where HC= Total Hydrocarbon measured as n-hexane equivalent:
Provided that in case of Petrol vehicles fitted with three-way closed loop catalytic converters
operating in a specific city or area, the Government of the respective State or Union Territory
Administration, as the case may be, may, by notification in the Official Gazette, specify the
introduction of measurement of LAMBDA (dimensionless value representing burning efficiency of
an engine in terms of the air/fuel ratio in the exhaust gases) and tighter emission norms for in-use
vehicles with such periodicity as may be warranted, after ensuring that gas analyzers capable of
measuring the values, duly approved by the testing agencies, are available in such city or area, as
the case may be:
Provided further that testing procedures are prescribed in TAP documents Nos. 115 and 116
as amended from time to time:
Provided also that the compliance to the limits prescribed in the above proviso shall be
included in the certificate issued by the vehicle manufacturer in Form 22 or Form 22-A, as
applicable for the vehicle manufactured on or after 1st October, 2004.
1[Provided that in the case of CNG/LPG motor vehicles operating on Bi-fuel mode, the test
shall be conducted only on CNG/LPG mode.]
(ii) Smoke density for all diesel-driven vehicles shall be as follows:—
TABLE
DIESEL VEHICLES
Method of Test Maximum Smoke Density
Light absorption coefficient
(1/m)
Hartidge units
Free acceleration test for turbo
charged engine and naturally
aspirated engine
2.45 65
________________________________
1. Ins. by G.S.R. 84(E), dated 9th February,2009 (w.e.f. 9-2-2009)
101
The free acceleration test shall be carried out using the instrument type approved as per CMVR
116(3) with the vehicle engine warmed up to attain oil temperature of minimum 60°C. During each
free acceleration, maximum no load speed reached shall be within bandwidth of ±500 rpm of the
average value in respect of 3-wheeler vehicles and ±300 rpm of the average value for all other
categories of vehicles. The free acceleration test shall be repeated till the peak smoke density values
recorded in four successive accelerations meeting the above maximum no load rpm criteria are
situated within a bandwidth of 25% of the arithmetic mean (in m-1 unit) of these values or within a
bandwidth 0.25 K, whichever is higher and do not form a decreasing sequence. The smoke density
to be recorded shall be arithmetic mean of these four readings. In case the valid readings are not
obtained within 10 free accelerations or the smoke .density recorded is not within the limits, the
testing shall be discontinued and the vehicle owner shall be advised to resubmit the vehicle after
repair/ service.]
(3) On and from the date1 of commencement of this sub-rule, all petrol-driven vehicles shall be so
manufactured that they comply with the mass emission standards as specified at Annexure I. The
breakdown of the operating cycle used for the test shall be as specified at Annexure II, and the
reference fuel for all such tests shall be specified in Annexure III to these rules.
(4) On and from the date2 of commencement of this sub-rule, all diesel-driven vehicles shall be so
manufactured that they comply with the standards based on exhaust gas opacity as specified at
Annexure IV to these rules.
(5) On and from the date3 of commencement of this sub-rule, all petrol-driven vehicles shall be so
manufactured that they comply with the following levels of emissions 4[when tested as per test
cycle specified in Annexure V]:—
Mass of Carbon Monoxide Mass of Hydrocarbons (CO) Mass of Nitrogen
Oxides
(HQ (NO)
Maximum grams per KW1T Maximum grams per KWH Maximum grams per KWH
14 3.5 18
5[Provided the standards for exhaust gas emissions applicable to agricultural tractors shall be
notified separately.]
_________________________________________________
1. Brought into force on 1st day of April, 1991 vide S.O.869(E), dated 27-10-1989.
2. Brought into force on 1st day of April, 1991 vide S.O.869(E), dated 27-10-1989.
3. Brought into force on 1st day of April, 1992 videS.0.869(E), dated 27-10-1989.
4. Substituted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
5. Inserted by G.S.R 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
102
(6) Each motor vehicle manufactured on and after the dates specified in sub-rule (2), (3), (4) or
(5), shall be certified by the manufacturers to be conforming to the standards specified in the said
sub-sections, and further certify that the components liable to effect the emission of gaseous
pollutants are so designed, constructed and assembled as to enable the vehicle, in normal use,
despite the vibration to which it may be subjected, to comply with the provisions of the said sub-
rule.
1[(7) After the expiry of a period of one year from the date on which the motor vehicle was first
registered, every such vehicle shall carry a valid "Pollution under control" certificate issued by an
agency authorised for this purpose by the State Government. The validity of the certificate shall be
for2[six months] and the certificate shall always be carried in the vehicle and produced on demand
by the officers referred to in sub-rule (1) of rule 116.
(8) The certificate issued under sub-rule (7) shall, while it remains effective, be valid throughout
India.]
3[(9) Mass emission standard for diesel vehicles
Type approval tests
Vehicle Category HC*
(g/KWH)
CO*
(g/KWH)
NOx
(g/KWH)
Smoke
Medium & Heavy over
3.5 Ton/GVW
Light diesel upto
3.5 Ton/GVW
or
2.4
2.4
11.2
11.2
14.4
14.4
***
***
Reference mass R(Kg) CO**
g/KM g/KM HC+NOx **
R<1020
1020<R<1250
1250<R< 1470
1470<R< 1700
1700<R<1930
1930<R<2150
R<2150
5.0
5.7
6.4
7.0
7.7
8.2
9.0
2.0
2.2
2.5
2.7
2.9
3.5
4.0
Note:
*The test cycle is as per 13 mode cycle on dynamometer.
** The test should be as per Indian driving cycle with cold start.
***The emissions of visible pollutants (smoke) shall not exceed the limit value to smoke density.
When expressed as light absorption coefficient given below for various nominal flows when tested
as constant speeds over full load. (As indicated at Annexure I).
___________________________________
1. Added by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
2. Substituted by G.S.R 111(E), dated 10-2-2004, for “six months or any lesser period as may be specified by
die State Government from time to time” (w.e.f. 10-8-2004).
3. Substituted by G.S.R. 163(E), dated 29-3-1996 (w.e.f. 1-4-1996). Earlier sub-R. (9) was added by G.S.R.
609(E), dated 15-9-1993 (w.e.f. 15-9-1993).
103
COP STANDARDS
*10% relaxation in the standards for HC, CO and NOx would be given. **10% relaxation in the
standards for CO and combined HC+NOx would be given.
1[Mass emission standard for petrol-driven vehicles—Effective from 1st April, 1998
(i) Passenger Cars—
Type approval tests
Cubic Capacity
(cm3)
Carbon
Monoxide (gm/km)
HC+NOx
(gm/km)
Passenger cars
fitted with
catalytic
converter
Passenger cars
not fitted with
catalytic
converter
Passenger
cars fitted
With catalytic
converter
Passenger
cars not fitted
with catalytic
converter
<1400 4.34 8.68 1.50 3.00
>1400<2000 5.60 11.20 1.92 3.84
>2000 6.20 12.40 2.18 4.36
Notes.—1. The tests will be as per Indian driving cycle with warm start. However, with
effect from 1st April, 1998, the test will be as per Indian driving cycle with cold start for catalytic
converter fitted vehicles as:—
Soak Temperature = 20°-30°C
Soak Period = 6.30 hrs
Preparatory running before sampling = 4 cycles
Number of test cycles = 6
Break down of cycles = Indian driving cycle as per Annexure II
2. For passenger cars not fitted with catalytic converters, the test will continue to be with warm start
as per existing procedure, till 1-4-2000.
3. There should be no crankcase emission.
4. Evaporative emission should not be more than 2.0g/test.
5. COP standards:- 20% relaxation in the standards for Carbon Monoxide and combined ITC + NOx
would be given.
______________________________
1. Substituted by G.S.R. 46(E), dated 21-1-1998 (w.e.f. 1-4-1998).
104
6. For vehicles fitted with catalytic converter a deterioration factor of 1.2 on Type-Approval Limits
will be applicable for durability.]
(ii) Three-Wheelers (for all categories)—
CO gms/km 6.75
HC + NOx gms/km 5.40
Note:
1. The test will be as per Indian driving cycle with warm start. However, with effect from 1st April,
1998, the test will be as per Indian driving cycle with cold start.
2. COP standards: 20% relaxation in the standards for Carbon Monoxide and combined HC +
NOx would be given.
(iii) Two-Wheelers (for all categories)—
CO gms/km 4.50
HC + NOx gms/km 3.60
Note:
1. The test will be as per Indian driving cycle with warm start. However, with effect from 1st April,
1998, the test will be as per Indian driving cycle with cold start.
2. COP standards:- 20% relaxation in the standards for Carbon Monoxide and combined HC+NOx
would be given.
ANNEXURE I
Nominal Flow Light Absorption Nominal Flow Light Absorption
G(l/2) (K(l/m)) G(l/2) (K(l/m))
42 2.26 120 1.37
45 2.19 125 1.345
50 2.08 130 1.32
55 1.985 135 1.30
60 1.90 140 1.27
65 1.84 145 1.25
70 1.775 150 1.205
105
75 1.72 160 1.19
80 1.665 165 1.17
85 1.62 170 1.155
90 1.575 175 1.14
95 1.535 180 1.125
100 1.495 185 1.11
105 1.465 190 1.095
110 1.425 195 1.08
115 1.395 200 1.065
1[2[(10) MASS EMISSION STANDARDS FOR VEHICLES MANUFACTURED ON AND
AFTER 1ST JUNE, 1999 IN CASE OF NATIONAL CAPITAL REGION OF DELHI AND IN
OTHER CASES ON AND AFTER 1ST APRIL, 2000]
A. For Petrol-Driven Vehicles
(1) Passenger Cars CO(g/km) HC+NOx(g/km)
Type Approval 2.72 0.97
Conformity of Production 3.16 1.13
Notes.—1. The test shall be as per the modified Indian driving cycle, with cold start, as specified in
Annexure IV-B, on Chassis Dynamometer.
2. There should be no crankcase emission.
3. Evaporative emission should not be more than 2.0g/test.
4. For vehicles fitted with catalytic converter, a deterioration factor of 1.2 on Type Approval Limits
will be applicable for durability.
5. Commercial fuel shall be as notified by the Ministry of Environment and Forests vide
Notification No. G.S.R. 176(E), dated the 2nd April, 1996.
6. Reference test fuel shall be as specified in Annexure IV-C.
2-Wheelers and 3-Wheelers CO(g/km) HC+NOx(g/km)
2-Wheeler 3-Wheeler 2-Wheeler 3-Wheeler
Type Approval 2.0 4.0 2.0 2.0
Conformity of Production 2.4 4.8 2.4 2.4
_______________________
1. Sub-R (10) inserted by G.S.R. 493(E), dated 28-8-1997 (w.e.f. 1-4-2000).
2. Substituted by G.S.R. 399(E), dated 1-6-1999, for “10. Mass Emission Standards for vehicles
manufactured on and after 1st April, 2000″ (w.e.f. 1-6-1999).
106
Notes.—The test shall be as per the Indian driving cycle, with cold start, on Chassis
Dynamometer as specified in Annexure IV-B to the principal rules.
Commercial fuel shall be as notified by the Ministry of Environment and Forests vide
Notification No. G.S.R. 176(E), dated the 2nd April, 1996.
Reference test fuel shall be as specified in Annexure IV-C.
1[For 2-wheelers and 3-wheelers fitted with catalytic converter, a deterioration factor of 1.2 on Type
Approval Limits, will be applicable for durability:
Provided that the vehicle manufacturers may opt for an ageing test of 30,000 kms for
evaluating deterioration factor, as per procedure that may be laid down by the Central Government.]
B. For Diesel Vehicles (Including Two and Three-Wheelers)
I. Vehicles with GVW exceeding 3.5 ton
Pollutants Limits for
Type Approval Conformity of Production
CCX g/KWn 4.5 4.9
HCfe/kWh 1.1 1.23
NOxfe/kWh 8.0 9.0
FM(g/k Wh) for engines with power exceeding
85kW
0.36 0.4
PM(g/k Wh) or engines with power not exceeding
85k W
0.36 0.4
II. Vehicles with G VW equal to or less than 3.5 ton
Pollutants Limits for
Type Approval Conformity of Production
CO( g/kWh) 4.5 4.9
HC(g/kWh) 1.1 1.23
NOx (g/kWh) 8.0 9.0
PM(g/k Wh) for engines with power exceed ing
85kW
0.36 0.4
PM(g/ k Wh) for engines with power equal to or
less than 85kW
0.61 0.68
___________________________________________________
1. Inserted by G.S.R. 400(E), dated 31-5-2002 (w.e.f. 31-5-2002).
107
Or Chassis Dynamometer Test
Reference Mass (kg) Limits for Type Approval
gm/km
Limits for conformity of
Production gm/km
CO HC+NOx PM CO HC+NOx PM
R≤1250
1250≤R≤1700
1700≤R
2.72
5.17
6.90
0.97
1.40
1.70
0.14
0.19
0.25
3.16
6.0
8.0
1.13
1.60
2.0
0.18
0.22
0.29
Notes.—The test for vehicles with GVW equal to or less than 3.5 ton shall be as per the 13 mode
cycle on engine dynamometer specified in Annexure IV-A to the principal rules.
The test shall be as per the Indian driving cycle, for 2-Wheelers and 3-Wheelers and
modified Indian driving cycle for 4-Wheelers with cold start, as specified in Annexure IVB on
Chassis Dynamometer.
For vehicles fitted with catalytic converters a deterioration factor 1.1 of CO; 1.0 for
HC+NOx and 1.2 for PM on type approval limits will be applicable for durability.
The emission of visible pollutants (smoke) shall not exceed the limit value to smoke density,
when expressed as light absorption co-efficient for various nominal flows as in Annexure I to rule
115(9), (Notification No. G.S.R. 163(E), dated 29th March, 1996), when tested at constant speeds
over full load. These smoke limits are without correction factor and engines are to be tested with
conditioned air supplied to the engine to maintain atmospheric factor of 0.98 to 1.02.
Commercial fuel shall be as notified by the Ministry of Environment and Forests vide
Notification No. G.S.R. 176(E), dated the 2nd April, 1996.
Reference test fuel shall be as specified in Annexure IV-D.]
1For 2-wheelers and 3-wheelers fitted with catalytic converter, the deterioration factor shall
be as follows:
CO* 1.1; HC + NOx = 1.0; PM-1.2:
Provided that the vehicle manufacturers may opt for an ageing test of 30,000 kms lor
evaluating deterioration factor, as per procedure that may be laid down by the Central Government:
Provided further that the above provisions shall come into force after six months from the
publication of the notification.]
2[(11) Mass Emission Standards (Bharat Stage II):—
_____________________________________
1. Inserted by G.S.R. 400(E), dated 31-5-2002 (w.e. f. 31 -5-2002).
2. Inserted by G.S.R. 77(E), dated 31-1-2000. Brought into force in the National Capital Region
w.e.f. 1-4-2000 vide G.S.R. 77(E), dated 31-1-2000, in Mumbai (including Greater Mumbai)
w.e.f. 1-1-2001 and in Calcutta and Chennai w.e.f. 1-7-2001 vide G.S.R. 779(E), dated 29-8-
2000.
108
(A) Motor Cars with seating capacity of and up to 6 persons (including driver) and Gross
Vehicle Mass (GVM) not exceeding 2500 kg.
Standards (Type Approval=COP)(g/km)
Vehicles with
Gasoline engine
Diesel engine
CO (HC+NOx) PM
2.2 0.5 —
1.0 0.7 0.08
B) Four-Wheeler Passenger Vehicles with GVW equal to or less than 3500 kg and designed to
carry more than 6 persons (including driver) or maximum mass of which exceeds 2500 kg.
Class Ref. Mass(rw)
kg
Limit Values for Type Approval (TA) as well as COP
Mass of
C 0(g/km) Mass of
HC+NOx(g/km)
Mass of
PM(g/km)
Case line Diesel Gasoline Diesel Diesel
I rw<1250 2.2 1.0 0.5 0.7 0.08
II l25U<rw<1700 4.0 1.25 0.6 1.0 0.12
III I700<rw 5.0 1.5 0.7 1.2 0.17
Notes:—
1. The test including driving cycle shall be as per sub-rule (10), with the modifications that:—
(i) there shall be no relaxation of norms for COP purposes,
(ii) the tests shall be on Chassis dynamometer,
(iii) the driving cycle shall be at a maximum speed of 90 kmph, and
(iv) the reference fuel shall be of a maximum of 0.05% sulphur content.
2. Commercial fuel for meeting above norms shall be upto 0.05% mass maximum sulphur content.
3. There shall be no crankcase emissions for petrol-driven vehicles.
4. Evaporative emission shall not be more than 2.0g/ test from petrol-driven vehicles.
5. For the above vehicles when fitted with catalytic converter deterioration factor shall be as
follows:—.
Gasoline engines: CO=1.2; (HC+NOx)=l .2;
Diesel engines: CO=l.l; (HC+NOx)=1.0; PM=1.2:
109
Provided that the vehicle manufacturers may opt for an ageing test of 80,000 kms for
evaluating deterioration factor, as per procedure that may be laid down by the Central Government.
6. For diesel engine vehicles, the emission of visible pollutants (smoke) shall not exceed the limit
value to smoke density, when expressed as light absorption coefficient for various nominal flows as
in Annexure I to rule 115(9) when tested at constant speeds over full load.]
1[(C) Four-Wheeled Vehicles (other than passenger vehicles) with GVW equal to or less than 3500
kg shall conform the following norms:—
Engine Dynamometer Test
Limit Values for Type Approval (TA) as well as (COP)
CO(g/kWh) HC (g/kWh) NOx (g/kWh) PM (g/kWh)
4.0 1.1 7.0 0.15
Or Chassis Dynamometer Test
Class Ref. Mass (RM)
Kg Mass of CO (g/km) Mass of HC+NQx (g/km) Mass of
PM(g/km)
RM Gasoline Diesel Gasoline Diesel
I RM ≤ 1250 2.2 1.0 0.5 0.7 0.08
II 1250 ≤RM≤ 1700 4.0 1.25 0.6 1.0 0.12
III 1700 ≤ RM 5.0 1.5 0.7 1.2 0.17
Notes:
1. (a) There shall be no relaxation for COP purposes.
(b) The tests shall be carried out on the engine dynamometer operation as specified in Annexure IV-
A of the rules. The tests on Chassis dynamometer shall be as per the driving cycle given in Note of
clause (B) of sub-rule (11) of rule 115.
(c) The reference fuel shall be of a maximum of 0.05% mass sulphur content.
________________________________________________________
1. Inserted by G.S.R. 286(E), dated 24-4-2001 published in the Gazette of India, dated 24-4-2001,
Ext., Pt. II, S. 3(z), SI. No. 198. In the National Capital Territory of Delhi in respect of Vehicles
manufactured on or after six months from the date of publication in the Official Gazette, i.e., 24-
4-2001 and in respect of the “Four-Wheeled Transport Vehicles” which are plying on Inter-State
Permits or on National Permits or on All India Tourist Permits within the jurisdiction of National
Capital Territory of Delhi, and in respect of any Vehicles in other areas of country, from such
date as the Central Government may, by notification appoint in the Official Gazette, and different
dates may be appointed for different areas.
110
2. Commercial fuel for meeting above norms shall be up to 0.05% maximum mass sulphur content.
3. For diesel engine vehicles the emission of visible pollutants (smoke) shall not exceed the limit
value to smoke density, when expressed as light absorption coefficient for various nominal flows as
in Annexure I to sub-rule (9) of rule 115 when tested at constant speeds over full load. These smoke
limits are without correction factor and engines are to be tested with conditioned air supplied to the
engine to maintain atmospheric factor of 0.98 to 1.02.
4. For diesel engined vehicles, the free acceleration smoke for naturally aspirated and turbo-charged
engines shall not exceed the smoke density limit value as in clause (c) of sub-rule (2) of rule 115.
5. There shall be no crankcase emissions for petrol engined vehicles.
6. Evaporative emission shall not be more than 2.0g/test from petrol engined vehicles.
(D) Vehicles with GVW exceeding 3500kg shall conform the following norms:—
Limit Values for Type Approval (TA) as well as (COP)
CO(g/kWh) HC(g/kWh) NOx(g/kWh) PM(g/kWh)
4.0 1.1 7.0 0.15
Notes:
1. (a) There shall be no relaxation for COP purposes.
(b) The tests shall be carried out on the engine dynamometer operation as specified in Annexure IV-
A of the rules.
(c) The reference fuel shall be of a maximum of 0.05% mass sulphur content.
2. Commercial fuel for meeting above norms shall be up to 0.05% mass maximum sulphur content.
3. For diesel engined vehicles, the emission of visible pollutants (smoke) shall not exceed the limit
value to smoke density, when expressed as light absorption coefficient for various nominal flow as
in Annexure I to sub-rule (9) of rule 115 when tested at constant speeds over full load. These smoke
limits are without correction factor and engines are to be tested with conditioned air supplied to the
engine to maintain atmospheric factor of 0.98 to 1.02.
4. For diesel engined vehicles, the free acceleration smoke for naturally aspirated and turbo-charged
engines shall not exceed the smoke density limit value as in clause (c) of sub-rule (2) of rule 115.]
111
1[(12) MASS EMISSION STANDARDS (BHARAT STAGE II) FOR TWO-WHEELER AND
THREE-WHEELER MANUFACTURED ON AND FROM 1ST APRIL, 2005 SHALL BE AS
FOLLOWS, NAMELY:—
TABLE
Vehicle Category Pollutants TA=COP norms g/km TA = COP D.F. (*)
(1) (2) (3) (4)
Two-wheeler (Petrol)
CO 1.50 1.2
HC+NOx 1.50 1.2
Three-wheeler (Petrol)
CO 2.25 1.2
HC+NOx 2.00 1.2
Two-wheeler and
Three-wheeler
(Diesel)
CO 1.00 1.1
HC+NOx 0.85 1.0
PM 0.10 1.2
Deterioration Factor, see para (c) below.
(a) The test shall be as per the Indian Driving Cycle with cold start on chassis dynamometer as
specified in the Table given below by testing agencies, namely:—
TABLE
Test Cell Conditions Petrol two-wheeler and three
wheeler
Diesel two-wheeler and three
wheeler
(1) (2) (3)
Soak Temperature 20-30° C 20-30° C
Soak period 6-30 hours 6-30 hours
Preparatory running
before
sampling
Idling of 40 seconds and 4 cycles Idling of 40 seconds
No. of test cycles 6 6
Breakdown of cycles Indian Driving Cycle as per
Annexure II to principal rule
Indian Driving Cycle as per
Annexure II to principal rule
(b) Reference fuel for testing shall be in line with that in the ECE;
(c) (i) For all types of two-wheeler and three-wheeler petrol vehicles, a deterioration factor as
specified in column (4) in the Table in this sub-rule shall be applicable for durability:
__________________________________________
1. Inserted by G.S.R. 720(E), dated 10-9-2003.
112
Provided that the vehicle manufacturer may opt for an ageing test of 30,000 kms for
evaluating deterioration factor, as per procedure that may be laid down by the Central Government
from time to time;
(ii) For all types of two-wheeler and three-wheeler diesel vehicles, a deterioration factor as
specified in column (4) in the Table in this sub-rule shall be applicable for durability:
Provided that the vehicle manufacturer may opt for an ageing test of 30,000 kms for
evaluating deterioration factor, as per procedure that may be laid down by the Central Government
from time to time;
(d) For diesel engine vehicles, the emission of visible pollutants (smoke) shall not exceed
the limit value to smoke density, when expressed as light absorption co-efficient for various
nominal flow as indicated in Annexure I to sub-rule (9) of rule 115 when tested at constant speed
over full load;
(e) COP frequency and samples:—
SI. No. Type of Vehicle Annual Production COP Frequency
Exceeding Upto
(1) (2) (3) (4) (5)
1. Two-wheeler and
three wheeler 250 per 6 months 10000 per year Once every year
2. Two-wheeler 100000 per year 150000 per 6 months Once every 6 months
3. Two-wheeler 150000 per 6 months — Once every 3 months
4. Three-wheeler 10000 per year 75000 per 6 months Once every 6 months
5. Three-wheeler 75000 per 6 months — Once every 3 months
For production volumes of less than 250 per 6 months the method as prescribed in the
proviso to rule 126-A shall apply;
(f) Testing procedures shall be in accordance with the reference document
MOST/CMVR/TAP-115/116 as amended from time to time by the Government of India in the
Ministry of Road Transport and Highways:]
1[Provided that Mass Emission Standards (Bharat Stage II) for diesel driven two wheeler and
three-wheeler shall come into force on the dates specified against each of the States in Table
below:—
________________________________
1. Inserted by G.S.R. 200(E),dated 1-4-2005(w.e.f. 1-4-2005).
113
TABLE
SI. No. State Date
(1) (2) (3)
1. Rajasthan 1st June, 2005
2. Uttar Pradesh—
Mathura, Kannauj, Muzaffarnagar, Aligarh,
Farukkabad, Saharanpur, Badaun, Barreily,
Moradabad, Hathras, Rampur, Bijnor, Agra, Pilibhit,
J.P. Nagar, Mainpuri, Lalitpur, Hardoi, Firozabad,
Jhansi, Shahjahanpur, Eta wall, Jalon, Lakhirnpur
Kheri, Etah, Mahoba and Sitapur
1 st June, 2005
3. Uttaranchal 1st July, 2005
4. Madhya Pradesh 1st September, 2005
5. Himachal Pradesh 1st October, 2005
6. Jammu and Kashmir 1st October, 2005
7. Punjab 1st October, 2005.
1[(13) Without prejudice to the provisions contained in clause (a) of sub-rule (2) of Rule 1 of
the Central Motor Vehicle (3rd Amendment) Rules, 2000 and clause (a) of sub-rule (ii) of Rule 1 of
the Central Motor Vehicles( 2nd Amendment ) Rules, 2001, notifications number S.O. 779(E), dated
29.08.2000 and number S.O. 90 (E), dated 27.01.2003, issued under clause (b) of sub-rule (2) of
Rule 1 of the Central Motor Vehicles ( 3rd Amendment) Rules, 2000, notification number S.O. 731
(E), dated 21.07.2001, number S.O. 801(E), dated 26.07.2002 and number S.O. 940 (E), dated
04.09.2002, issued under clause (b) of sub-rule (ii) of Rule 1 of the Central Motor Vehicles ( 2nd
amendment ) Rules, 2001 and notification number S.O. 91 (E), dated 27.01.2003, issued under
clause (b) of sub-rule (2) of Rule 1 of the Central Motor Vehicles (3rd Amendment) Rules,(b) of
sub-rule (2) of Rule 1 of the Central Motor Vehicles (3rd Amendment) Rules ,2000 and clause (b) of
sub-rule (ii) of Rule 1 of the Central Motor Vehicles (2nd Amendment) Rules,2001, the provisions
of sub-rule (II) shall, in respect of four wheeled vehicles manufactured on and from the 01.04.2005,
come into force in all States and Union Territories on the 01.04.2005.]
2[Provided that provisions of sub-rule (11) shall, in respect of four wheeled vehicles be
registered in Sholapur and Lucknow, come into force in Sholapur and Lucknow from 01.06.2004)
Provided further that the above said provision shall not apply in respect of four wheeled
transport vehicles from Sholapur to other parts of the State of Maharashtra or from Luckonw to the
other parts of the State of Uttar Pradesh or on inter-state or National Permit or on the All India
Tourist Permit, within the territorial jurisdiction of the said cities.]
___________________________________________
1. Ins by GSR 927 (E), dated 05.12.2003
2. Ins by GSR 200 (E), dated 18.03.2004
114
1[Provided that Mass emission standards ( Bharat Stage II) for diesel driven four wheeled
vehicles shall come into force on the dates specified against each of the States in Table below:-
TABLE
SI. No. State Date
(1) (2) (3)
1. Rajasthan 1st June, 2005
2. Uttar Pradesh—
Mathura, Kannauj, Muzaffarnagar, Aligarh,
Farukkabad, Saharanpur, Badaun, Barreily,
Moradabad, Hathras, Rampur, Bijnor, Agra, Pilibhit,
J.P. Nagar, Mainpuri, Lalitpur, Hardoi, Firozabad,
Jhansi, Shahjahanpur, Eta wall, Jalon, Lakhirnpur
Kheri, Etah, Mahoba and Sitapur
1 st 2[July], 2005
3. Uttaranchal 1st July, 2005
4. Madhya Pradesh 1st September, 2005
5. Himachal Pradesh 1st October, 2005
6. Jammu and Kashmir 1st October, 2005
7. Punjab 1st October, 2005.
3[(14) Mass Emission Standards (Bharat Stage III).—The Mass Emission Standards for Bharat
Stage III shall be as under:—
(A) Motor cars with seating capacity of and up to six persons (including driver) and Gross Vehicle
Weight not exceeding 2500 kg.
_______________________________________
1. Ins by GSR 200(E), dated 01.04.2005
2. Ins by GSR 200(E), dated 18.03.2004
3. Inserted by G.S.R. 686(E), dated 20-10-2004. Brought into force—(a) in the National
Capital Region and the cities of Mumbai, Kolkata, Chennai, Bangalore, Hyderabad
including Secundrabad, Ahmedabad, Pune, Surat, Kanpur and Agra in respect of four-
wheeled vehicles manufactured on and from 1st April 2005, except in respect of four-
wheeled transport vehicles plying on Inter-State Permits or National Permits or All India
Tourist Permits within the jurisdiction of these cities; and (b) in other areas of the country,
from such date as may be notified by the Central Government. Here “National Capital
Region” shall have the same meaning as assigned to it in clause (/) of section 2 of the
National Capital Region Planning Board Act, 1985 (2 of 1985).
115
Vehicles with
Limit Values for Type Approval (TA) as well as COP (g/km)
CO HC NOx HC+NOx PM
Gasoline 2.30 0.20 0.15 - -
Diesel engine 0.64 - 0.50 0.56 0.05
(B) Four-Wheeler Passenger Vehicles with Gross Vehicle Weight equal to or less than 3500 kg
and designed to carry more than six persons (including driver) or 3000 kg.
and
(C) Four-wheeled Vehicle (other than passenger vehicles) with Gross Vehicle Weight equal to
or less than 3500 kg shall conform to the following norms:—
Limit Values for Type Approval (TA) (g/km) as well as COP
CO HC NOx HC+NOx PM
Class Ref. Mass
(rw) kg
Gas
oline
Diesel Gas
oline
Diesel Gas
oline
Diesel Gas
oline
Diesel Diesel
I rw<1305 2.30 0.64 0.20 — 0.15 0.50 — 0.56 0.05
II 1305<rw
<1760
4.17 0.80 0.25 — 0.18 0.65 — 0.72 0.07
III 1760<rw 5.22 0.95 0.29 — 0.21 0.78 — 0.86 0.10
Notes 1.The test shall be on Chassis Dynamometer.
2.The test including driving cycle shall be as per sub-rule (10), with the modifications that-
(i) the exhaust gas sampling should start at the initiation of the engine start up
procedure ( refer (Annexure IVE);
(ii) the driving cycle shall be at a maximum speed of 900kmph ( refer Annexure IV
E for the detailed cycle)
3.There shall be no relaxation of norms for COP purposes.
4. In case of vehicles operating on CNG or LPG mode all the provisions prescribed in rules
115-B and 115-C shall be applicable, except that the norms to be compiled with shall be as per these
rules.
5. The reference fuel shall be as specified in Annexure IV-F, Annexure 1V-G and Annexure
IVH for diesel, LPG and CNG, respectively.
6. There shall be no crankness emissions for petrol driven vehicles.
116
7. Evaporation emission shall not be more than 2.0 g/test from petrol driven vehicles. The
evaporative emission test procedure for vehicles with positive-ignition engines shall be as described
in Annexure VI of European Economic Community (EEC) Directive 70/220/EEC last amended by
98/69/EC.
8. The Conformity of Production (COP) testing procedure shall be as described in Section 7
of Annexure 1 of EEC Directive 70/220/EEC ( Refer Appendix 1 or Appendix 2 as applicable ) last
amended by 98/69/EC.
9. The COP frequency and sample –
(i) The COP period for each vehicle model including its variants shall be once in a
year.
(ii) For production volume of less than 250 for six months, the method as prescribed
in the provisos to Rule 126-A shall apply.
10. The vehicles meeting the above norms shall use commercial fuel as per BIS specification
IS: 1460-2000 (Amendment No. 1-January,2003), (Fourth Revision) for Diesel and IS:2796-2000
(Amendment NO. II-February, 2003)(Third Revision) for Gasoline.
11. For the vehicles described in clauses (A),(B) and (C) of this sub-rule , deterioration
factor shall be as given below:-
Engine category Deterioration factors
CO HC NOx HC+NOx PM
Gasoline/Gas Engine 1.2 1.2 1.2 — —
Diesel Engine 1.1 — 1.0 1.0 1.2
(i) Alternatively, the vehicle manufacurers may opt for an ageing test of 80,8000 kms.
For evaluating deterioration factor, as described in Annexure VII of European
Community Directive 70/220/EEC last amended 98/69/EC with the following
exceptions:-
(a) The maximum lap speed at 10th lap will be 72 km/h.
(b) The maximum lap speed at 11th lap will be 90 km/h.
(ii) The above ageing test should be carried out by the approved test agency.
12. For diesel vehicles, the emission of visible pollutants (smoke) shall not exceed the limit
value to smoke density, when expressed as light absorption co-efficient for various nominal flows
as given in Annexure I of sub-rule (9) when tested at constant speeds over full load. These smoke
limits are without correction factor and engines are to be tested with conditioned air supplied to the
engine to maintain atmosphere factor 0.98 to 1.02.
13 In case of diesel vehicles, the engine power shall be measured on engine dynamometer
and the measured power shall not differ from the specified power as given below:
117
(i) For Type approval: ± 10% at other measurement points for single cylinder engines. ±
2% at maximum power point and + 6 „ and -2% at other measurement points for all
other engines.
(ii) Testing procedures shall be in accordance with Chapter 6 of Part IV of the reference
document MOST/CMVR/TAP-115/116 as amended from time to time by the
Government of India in the Ministry of Shipping, Road Transport and Highways.
14. The vehicles described in clauses (A), (B) and (C) of this sub-rule should comply with
rule 115(2).
(D) Diesel vehicles with GVW exceeding 3500 kg shall conform to the following norms:—
Limit values for Type Approval (TA) as well as (COP)
Engine steady Sate Cycle(ESC) test Engine Load Response (ELR) test
CO (g/kWh) HC (g/Kwh) NOx(g/Kwh) PM(g/Kwh)[2] Smoke (m)[2]
(1) for engines having swept volume of less than 0.75 litre per cylinder and a rated power
speed of more than 3000rpm.
(2) For diesel engine only.
Notes.—1. The test shall be on engine dynamometer.
2. There shall be no relaxation of norms for COP purposes.
3. The gaseous and particulate emissions are to be determined on the ESC lest as described
in EEC document 1999/96/EC.
4. The smoke opacity is to be determined on the ELR test as described in EEC document
1999/96/EC.
5. In case of vehicles operating on CNG or LPG mode all the provisions prescribed in rules
115-B and 115-C shall be respectively applicable, except that limiting value shall be as per clause
(D) above.
6. The reference fuel shall be as specified in Annexure IV-F, Annexure 1VH and Annexure
IV-I for diesel, LPG and CNG, respectively.
7. The Conformity of Production (COP) testing procedure shall be as described in section 9
of Annexure I of EEC Directive 88/77/EEC last amended by 1999/96/EC.
8. The COP frequency and samples:—
(i) The COP period for each engine model including its variants shall be once in a year.
(ii) For production volume of less than 250 for six months, the method as prescribed in
the provisos to rule 126-A shall apply.
118
9. For diesel engine vehicles, the emission of visible pollutants (smoke) shall not exceed the
limit value of smoke density, as per Annexure I to rule 115(9). These smoke limits are without
correction factor and engines are to be tested with conditioned air supplied to the engine to maintain
atmospheric factor of 0.98 to 1.02.
10. The vehicles meeting the above norms shall use commercial fuel as per BIS specification
IS:1460-2000 (Amendment No. I—January, 2003) (Fourth Revision) for Diesel and IS:2796-2000
(Amendment No. II—February, 2003) (Third Revision) for Gasoline.
11. In case of diesel vehicles, the engine power shall be measured on engine dynamometer
and the measured power shall meet the requirements as given below:
(i) For Type approval: ± 2% at maximum power point and +6% and -2% at other
measurement points.
(ii) For conformity of production: -5%/+8% at maximum power point.
(iii) Testing procedures shall be in accordance with Chapter 6 of Part IV of the reference
document MOST/CMVR/TAP-115/116 as amended from time to time by the
Government of India in the Ministry of Shipping, Road Transport and Highways.
12. The vehicles mentioned in clause (D) shall also comply with rule 115(2).
(E) Diesel vehicles with GVW exceeding 3500 kg. and fitted with advanced exhaust after
treatment system including De-NOx catalyst and/or particulate trap shall additionally conform to
the following norms:—
Limit Values for Type Approval (TA) as well as (COP)
________________________________________________________
Engine Transient Cycle (ETC)
CO(g/kWh) HC (g/kWh) NOx (g/kWh) PM (g/kWh)
5.45 0.78 5.0 0.16/0.21[3]
(3) For engines having swept volume of less than 0.75 litre per cylinder and a rated power
speed of more than 3000 rpm.
Notes.—1. The test shall be on engine dynamometer.
2. There shall be no relaxation of norms for COP purposes.
3. The gaseous and particulate emissions are to be determined on the ESC lest as described
in EEC document 1999/96/EC.
4. The smoke opacity is to be determined on the ELR test as described in EEC document
1999/96/EC.
5. In case of vehicles operating on CNG or LPG mode all the provisions prescribed in rules
115-B and 115-C shall be respectively applicable, except that limiting value shall be as per clause
(D) above.
119
6. The reference fuel shall be as specified in Annexure IV-F, Annexure 1V-H and Annexure
IV-I for diesel, LPG and CNG, respectively.
7. The Conformity of Production (COP) testing procedure shall be as described in section 9
of Annexure I of EEC Directive 88/77/EEC last amended by 1999/96/EC.
8. The COP frequency and samples:—
(i) The COP period for each engine model including its variants shall be once in a year.
(ii) For production volume of less than 250 for six months, the method as prescribed in
the provisos to rule 126-A shall apply.
9. For diesel engine vehicles, the emission of visible pollutants (smoke) shall not exceed the
limit value of smoke density, as per Annexure I to rule 115(9). These smoke limits are without
correction factor and engines are to be tested with conditioned air supplied to the engine to maintain
atmospheric factor of 0.98 to 1.02.
10. The vehicles meeting the above norms shall use commercial fuel as per BIS specification
IS:1460-2000 (Amendment No. I—January, 2003) (Fourth Revision) for Diesel and IS:2796-2000
(Amendment No. II—February, 2003) (Third Revision) for Gasoline.
11. In case of diesel vehicles, the engine power shall be measured on engine dynamometer
and the measured power shall meet the requirements as given below:
(i) For Type approval: ± 2% at maximum power point and +6% and -2% at other
measurement points.
(ii) For conformity of production: -5%/+8% at maximum power point.
(iii) Testing procedures shall be in accordance with Chapter 6 of Part IV of the reference
document MOST/CMVR/TAP-115/116 as amended from time to time by the
Government of India in the Ministry of Shipping, Road Transport and Highways.
12. The vehicles mentioned in clause (E) shall also comply with rule 115(2).]
1[(F)(i) The Mass Emission Standards (Bharat Stage III) as specified in sub-clause
(iii), shall be applicable in the National Capital Region and the cities of
Mumbai,Kolkata, Chennai, Banglore, Hyderabad including Secunderabad,
Ahemdabad,Pune,Surat, Kanpur,Agra, Sholapur and Lucknow in respect of
two and three wheeler vehicles manufactured on or after 1st April, 2010.
(ii) The Mass Emission Standards (Bharat Stage III) as specified in sub-clause
(iii), shall be applicable in all the States and the Union Territories except
National Capital Region and the cities of Mumbai,Kolkata, Chennai,
Banglore, Hyderabad including Secunderabad, Ahemdabad,Pune,Surat,
Kanpur,Agra, Sholapur and Lucknow in respect of two and three wheeler
vehicles manufactured on or after 1st October, 2010
_______________________________
1. Subs by Notification No. GSR 443 (E), dated 21.05.2010
120
(iii) The Mass Emission Standards (Bharat Stage-III) for two and three wheeler
vehicles shall be as under-]
1[(G) The provisions of this sub-rule in respect of four wheeler vehicles
manufactured on and from the 1st October,2010 shall apply to all the States and the
Union Territories except National Capital Region and the cities of Mumbai,Kolkata,
Chennai, Banglore, Hyderabad including Secunderabad, Ahemdabad,Pune,Surat,
Kanpur,Agra, Sholapur and Lucknow
2[115A. 3[Emission of smoke and vapour from agricultural tractors, power tillers and
construction equipment vehicles driven by diesel engines.
(1) Every 4[agricultural tractor and construction equipment vehicle] manufactured on and
from the date of commencement of this rule shall be maintained by its owner in such condition and
shall be so used that visible and gaseous pollutants emitted by them comply with the standards as
prescribed in this rule.
(2) Every manufacturer of an 4[agricultural tractor and construction equipment vehicle] shall
comply with the standards for visible pollutants, emitted by it, when tested as per the procedure
described in Indian Standards IS: 12062:1987.
(3) The emission of visible pollutants shall not exceed the limit values given below when
tested on engine dynamometer at eighty per cent load at six equally spaced speeds, namely:—
(a) Fifty-five per cent of rated speed declared by the manufacturer or one
thousand r.p.m., whichever is higher; or
(b) rated speed declared by the manufacturer.
________________________________________________________________________________
Maximum Smoke Density
________________________________________________________________________________
Light absorption coefficient (lm) Hartridge units
________________________________________________________________________________
3.25 75
(4) Every diesel driven 5[construction equipment vehicles] shall be so manufactured and
produced by its manufacturer that it complies with the following standards of gaseous pollutants,
emitted by them in addition to those of visible pollutants as provided in sub-rule (2) when tested as
per the procedures described in ISO 8178-4 “CI” 8 mode cycle, namely:—
The weighted average Mass of Carbon Monoxide (CO), Hydrocarbons (HC) and Mass
Oxides of Nitrogen (NOx) in gram or 5[per] kilo watt.lrr. emitted during the test shall not exceed the
limits given below, both for type approval and Conformity On Production tests, namely:—
___________________________________
1. Subs by GSR 443(E), dated 21.05.2010
2. Ins by GSR 627 (E), dated 08.09.1999 (we.f. 01.10.1999)
3. Subs by GSR 589 (E), dated 16.09.2005
4. Subs by GSR 642 (E), dated 28.07.2000
121
5. Corrected by GSR 800 (E), dated 3.12.1999
Mass of Carbon Monoxide(CO) - 14.0 gram or per kilo watt hr.
Mass of Hydrocarbon(HC) - 3.5 gram or per kilo watt. Hr.
Mass of Oxides of Nitrogen(NOx) - 18.0 gram or per kilo watt. Hr.
1[(5) Every diesel driven agriculture tractor and power tiller shall be so manufactured and
produced by the manufacturer that it complies with the following standards of gaseous pollutants
emitted by them in addition to those of visible pollutants as provided in sub-rule (2) when tested as
per the procedure prescribed in ISO 8178-4 "CI" 8 mode cycle, namely:—
The weighted average Mass of Carbon Monoxide (CO), Hydrocarbon (HC) and Oxides of
Nitrogen (NOx) and Particulate Matter (PM) in gram per kilo watt hour emitted during the test shall
not exceed the limits given below in the Table for Type Approval (TA) and Conformity of
Production (COP) tests, namely:—
TABLE
(1) Bharat (Trem) Stage II Norms Bharat (Trem) Stage III norms
(2) (3)
TA=COP TA=COP
Mass of carbon monoxide (CO 9.0 5.5
Mass of hydrocarbon(HC) 15.0 9.5
Mass of oxides of nitrogen(NOx) 15.0 9.5
Mass of aprticular Matter(PM) 1.0 0.8
Notes.—
(l) The norms mentioned in column (2) of the said Table which are applicable for
agricultural tractor with effect from the 1st day of June, 2003, shall be applicable for power tillers
from the 1st day of October, 2006.
(2) The norms mentioned in column (3) of the said Table shall be applicable for agricultural
tractor with effect from the 1st day of October, 2005 and for power tillers from the 1st day of April,
2008.]
2[(6) Every diesel driven agriculture tractor and power tiller shall be so manufactured and
produced by the manufacturer that it complies with the following standards of gaseous pollutants
emitted by them in addition to those of visible pollutants as provided in sub-rule (2) when tested as
per the procedure prescribed in ISO 8178-4(1996) "CI" 8 mode cycle for variable speed engine and
in ISO 8178-4(1996) "D2" 5modes cycle for constant speed engines, namely:—
——————–
1. Sub-R. (5) substituted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 16-9-2005).
2. Ins by GSR 276 (E), dated 10.04.2007
122
The weighted average Mass of Carbon Monoxide (CO), Hydrocarbon (HC) and Oxides of
Nitrogen (NOx) and Particulate Matter (PM) in gram per kilo watt hour emitted during the test shall
not exceed the limits given below in the Table for Type Approval (TA) and Conformity of
Production (COP) tests, namely:—
TABLE
Limit value for Type Approval (TA) as well as for Conformity of Production(COP)
Bharat Satge
II(CEV)
Applicable with effect
from the
CO HC NOx PM
Category g/kWH
kW<8 1 st October,2008 8.00 1.30 9.20 1.0
8<kW<19 1 st October,2008 6.60 1.30 9.20 0.85
19<kW<37 1 st October,2008 6.50 1.30 9.20 0.85
37<kW<75 1 st October,2008 6.50 1.30 9.20 0.85
75<kW<130 1 st October,2008 5.0 1.30 9.20 0.70
130<kW<560 1 st October,2008 5.0 1.30 9.20 0.54
Bharat Satge
II(CEV)
Applicable with effect
from the
CO HC+NOx PM
kW<8 1 st April,2011 8.00 7.50 0.80
8<kW<19 1 st April,2011 6.60 7.50 0.80
19<kW<37 1 st April,2011 5.50 7.50 0.60
37<kW<75 1 st April,2011 5.0 4.70 0.40
75<kW<130 1 st April,2011 5.0 4.00 0.30
130<kW<560 1 st April,2011 3.50 4.00 0.20
Notes:-1. The test shall be on Engine Dynamometer.
2. The Test-Procedure for measurement of Gross Power (without Fan) shall be as per Part
IV of MoSRTH/CMVR/TAP-115/116 Issue No.3
3. The Test-Procedure for measurement of emission of visible and gaseous pollutants and
Particulate Matter shall be as per MoSRTH/CMVR/TAP-115/116 Part X (Sub-Part B)
123
4. The emission of visible pollutants shall not exceed the limit values given in sub-rule (3) of
Rule 115-A when tested on engine dynamometer at eighty percent load at six speeds as per sub-rule
(3) of Rule 115-A.
5. To meet Bharat Stage II (CEV) norms with effect from 1 st April,2011 Engine
manufacture may opt for an engine test as mentioned in Table 1 below for evaluating deterioration
factors as perAnnexure V of Part X, Sub-part B of MoSRTH/CMVR/TAP-115/116 Issue No. 3
TABLE 1
Category(power band) Useful life(hours)
(Emission durability Period)
< 19kW 3000
19<kW<+37(constant speed) 3000
19<kW<=37(variable speed) 5000
73 kW 8000
OR
Fixed Deterioration factors shall be used as per table 2 below:-
CO HC NOx PM
1.1 1.05 1.05 1.1
6. There shall be no ralxation of norms for COP purposes.
7. COP Selection Procedure shall be as per MoSRTH/CMVR/TAP-1115/116 Part VI.
8. COP Frequency:-
(a) for equipment with annual production upto 200 Nos. shall be once in two years
per Engine Family;
(b) for equipment with annual production exceeding 20 Nos. shall be once every year
per Engine Family.
1[115B. Mass emission standards for Compressed Natural Gas Driven Vehicles
2[Mass emission standards for vehicles when operating on Compressed Natural Gas
(hereinafter in this rule referred to as "CNG") shall be the same as are applicable for gasoline
vehicles with the exception that HC shall be replaced by Non-Methane Hydrocarbon (NMHC),
where NMHC = 0.3 x HC]
__________________________________
1. Rule 115-B subs. By GSR 853(E), dated 19.11.2001 (w.e.f. 19.05.2002)
2. Subs by GSR 111(E),dated 10.02.2004 (w.e.f. 10.02.2004)
124
A. Original Equipment/Converted Gasoline Vehicles:
(1) For gasoline vehicles with Original Equipment (hereinafter in this rule referred to as
O.E.) fitment.—
1[(a) In case of CNG fitments by vehicle manufacturers on new petrol vehicles, each
model manufactured by vehicle manufacturers shall be type approved as per the
prevailing mass emission norms as applicable for the category of new vehicles in
respect of the place of its use;]
(b) Base model and variants of such vehicle shall conform to these rules as applicable
and type approval emission norms in petrol mode as specified in these rules. In the
case of CNG mode, it shall meet mass emission norms as specified in Rule 115,
excluding crankness and evaporative emission norms.
(c) A vehicle base model and its variants fitted with petrol tank of capacity not
exceeding 5 litres, 3 litres and 2 litres on 4-wheeler, 3-wheeler and 2-wheeler
respectively, shall be exempted from mass emission tests, crank case emission test,
idle CO test and evaporative emission test in gasoline mode but shall comply other
provisions of these rules as applicable;
(d) Such vehicles shall be capable of bi-fule operations such as CNG and petrol;
(e) Prevalent Conformity of Production (hereinafter in this jrule referred to as COP)
procedure shall, also be applicable.
(II) For in-use Gasoline Vehicles:
(a) The in-use vehicles fitted with CNG kits shall meet the type approval emission
norms on CNG operation, as specified in these rules for gasoline vehicles as
applicable to the corresponding year of manufacture of such vehicles, subject to
minimum norms as under;-
(i) for the vehicles manufactured upto 31st March, 200 the type approval norms
equivalent to India-2000(India Stage-I) norms as applicable under these rules; and
(ii) for the vehicles manufactured after 1 st April,2000, the type approval norms
as specified in the Bharat Stage-II norms, till the validity of such Bharat Stage-II
norms.
2[(iii) for the vehicles manufactured on and after the 1st day of April, 2005, the type
approval norms as applicable subject to minimum of Bharat Stage III emission
norms in case of four-wheelers and Bharat Stage II emission norms for two and
three-wheelers
__________________________________
1. Cl.(a) subs. By GSR 5889(E), dated 16.09.2005 ( w.e.f. 16.9.2006)
2. Cl (iii) ins by GSR 589(E),dated 16.09.2005 ( w.e.f. 16.09.2006)
125
(b) For purposes of CNG kit approval , kit manufacturer or supplier shall obtain the
certificate from any of the test agencies authorized under Rule 126 based on engine
capacity of vehicle, in the following manner, namely:-
(i) CNG kit for the vehicle shall be type approval for vehicles irrespective of
make and model. Such a kit shall be considered fit for retro fitment in any vehicle
within a specified range of engine capacity of c.c. within a range of + 25% tolerance;
(ii) Separate type approval shall be necessary for the following types of vehicles ,
namely:-
(a) Two stroke;
(b) Four Stroke;
(c) Carburetted;
(d) Single point fule injected; and
(e) Multi point fuel injected;
Explanations.—In the case of O.E. or conversion of “In-Use” Gasoline Vehicles,—
(a) For the purposes of granting Type Approval to a CNG kit, the tests shall be carried
out as per the Table below by the test agencies.
TABLE
Test Reference Document
(1) (2)
(i)
(ii)
(iii)
Mass emission tests
Engine performance tests on engine
dynamometer applicable for OE only
Constant speed fuel consumption test
MOST/CMVR/TAP-115/116 and notifications
issued by the Government of India in this respect
IS:14599-1999
IS:11921,1986 (for 4-wheelers)
IS:10944,1983 (for mopeds)
IS: 10881,1984 (for motor cycles and scooters)
(b) The test procedure and safety guidelines for CNG vehicles, kit components including
installation thereof, shall be as per A1S 024, as amended from time to time, till such
time as corresponding BIS specifications are notified.
(c) For OE fitment and retrofitment on “in-use” vehicles, the responsibility to Type
Approval shall be that of the vehicle manufacturer and kit manufacturer or supplier
respectively.
126
(d) The Type Approval of CNG kit for “retrofitment” shall be valid for three years from
the date of issue of such approval and shall be renewable for three years at a time.
(e) The retrofitment of CNG kits on in-use vehicles shall be carried out by workshops
authorized by the kit manufacturer/supplier or vehicle manufacturers, as the case
may be.
(f) The test agency shall complete the test and give necessary certificate within a period
of three months from the date of receiving the kits.
(g) The kit manufacturer/supplier shall provide a layout plan for retrofitment of CNG kit
in the respective models on which any approved kit is to be installed, to the test
agency for vetting and approval. The retrofitment of the kit shall be on the basis of
such approved layout plan only. Testing agencies will be required to indicate
specifically, the models and their variants on which the certificate will be valid.
1[* * *]
B. O.E. CNG Vehicles/Converted Diesel Vehicle:
(I) For O.E. CNG Dedicated Vehicle (including drive-away chassis) made by vehicle
manufacturers.—
2[(a) In case of CNG fitments by vehicle manufacturers on new diesel vehicles, each
model manufactured by vehicle manufacturers shall be type approved as per the
prevailing mass emission norms as applicable for the category of new vehicles in
respect of the place of its use;]
(b) O.E. CNG engine approved for specific engine capacity can be installed on the base
model and its variants complying with the requirements under these rules as
applicable;
(c) Tests for particulate matter and emission of visible pollutants (smoke) under these
rules shall not be applicable;
(d) Prevailing COP procedure will also be applicable.
(II) For conversion by modification of engines of In-use Diesel Vehicles.—
(a) Type approval for diesel vehicle retrofitted/modified for dedicated CNG operation
shall be given for specific make and model of the vehicle, in view of major changes
or modifications involved in the CNG kit and diesel engine depending upon make
and model of the vehicle;
(b) CNG kit approved on the vehicle for specific engine capacity can be installed on the
base model and its variants fitted with the same capacity engine;
_______________________________
1. Item A, CI. (Ill) omitted by G.S.R. 111(E), dated 10-2-2004 (w.e.f. 10-8-2004).
2. CI. (a) substituted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 16-9-2006).
127
1[(c) The in-use vehicles when converted to operate on CNG shall meet the type approval
norms of diesel vehicles corresponding to the year of their manufacture subject to the
following minimum norms:—
(i) for the vehicles manufactured up to the 31st %day of March, 2000, the type
approval norms equivalent to India-2000 (India Stage I) norms as applicable
under these rules;
(ii) for the vehicles manufactured on and after the 1st day of April, 2000, the type
approval norms as specified in the Bharat Stage II norms, till the validity of
such Bharat Stage II norms;
(iii) for the vehicles manufactured on and after the 1st day of April, 2005, the type
approval norms as applicable subject to minimum of Bharat Stage III
emission norms in case of four-wheelers and Bharat Stage II emission norms
for two and three-wheelers till the validity of these norms;]
(d) Vehicles offered for Type Approval to the testing agency referred in rule 126 of the
Central Motor Vehicles Rules, 1989 shall have to comply with fitness requirement,
as applicable under these rules;
(e) Tests for particulate matter and emission of visible pollutants (smoke) under these
rules shall not be applicable;
(f) Separate Type Approval is required for mechanically controlled and electronically
controlled diesel fuel injected vehicles when retrofitted/ modified for CNG
operation.
Explanations.—In the case of O.E. or conversion of “In-Use” vehicles by
modification—
(a) for the purpose of granting Type Approval to the vehicle fitted with CNG engine
(converted from diesel engine) as O.E., or conversion by modification of “In-Use”
diesel vehicles, performance tests shall be carried out as per the Table given below
by the test agencies, namely:—
Test Reference document ( as amended from time to time)
(1) (2)
(i) Mass emission tests MOST/CMVR/TAP-115/116 and notifications issued by the
Government of India in this respect
(ii) Engine performance tests IS: 14599-1999
(iii) Gradeability In accordance with notification issued under rule 124 of
Central Motor Vehicles Rules, 1989
(iv)
Constant speed fuel
consumption
IS:11921,1986 (for 4-wheelers)
IS:10944,1983 (for mopeds)
IS: 10881,1984 (for motor cycles and scooters)
(v) Electro Magnetic
Interference (EMI)
In accordance with notification issued under rule 124 of
Central Motor Vehicles Rules, 1989
(vi) Range test of at least 250
km for buses
—
(vii) Cooling Performance IS: 14557,1998
_____________________________________
1. CI. (c) substituted byG.S.R 589(E),dated 16-9-2005(w.e.f. 16-9-2006).
128
Note:- (a) The mass emission test shall be carried out either on engine dynamometer or chassis
dynamometer as applicable.
(b) Test procedure and safety guidelines for CNG vehicles, kit components including
installation thereof, shall be as per AIS 024, as amended from time to time, till such time as
corresponding BIS specifications are notified.
(c) For O.E. fitment and retrofitment/modification on “In-use” vehicles, the
responsibility of type approval shall be that of the vehicle manufacturer and kit manufacturer or
supplier respectively;
(d) The type approval of CNG kit for retrofitment shall be valid for 3 years from the date
of issue and shall be renewable for three years at a time;
(e) The retrofitment of CNG kits on in-use vehicles shall be carried out byworkshops
authorized by the kit manufacturer/supplier or vehicle manufacturers, as the case may be;
(f) The test agency shall complete the test and give necessary certificate within a period
of three months form the date of receiving the kits.
1[***]
2C. Replacement of In-use diesel engine by new CNG engine:
For type approval of in-use vehicles having diesel engine replaced by new CNG engine, it
shall meet prevailing emission norms as applicable to the category of vehicles in respect of its place
subject to tests mentioned in the Table given below:]
TABLE
Test Reference document ( as amended from time to time)
(1) (2)
(i) Mass emission tests MOST/CMVR/TAP-115/116 and notifications issued by
the Government of India in this respect
(ii) Engine performance tests IS: 14599-1999
(iii) Gradeability test In accordance with notification issued under rule 124 of
Central Motor Vehicles Rules, 1989
(iv) Electro Magnetic
Interference (EMI)
In accordance with notification issued under rule 124 of
Central Motor Vehicles Rules, 1989
(v) Range test of at least 250
km for buses
—
(vi) Cooling Performance IS: 14557,1998
(vii)
Constant speed fuel
consumption
IS:11921,1986 (for 4-wheelers)
IS:10944,1983 (for mopeds)
IS: 10881,1984 (for motor cycles and scooters)
129
Explanation.—(a) Vehicles offered for Type Approval to the testing agency referred in rule
126 shall have to comply with fitness requirement, as applicable under these rules.
(b)Test procedure and safety guidelines for such CNG vehicles, kit components including
installation thereof shall be as per A1S 024, as amended from time to time, till such time as
corresponding BIS specifications are notified.
(c) The test agency shall complete the test and give necessary certificate within three months
of the same being submitted for tests.
(d) Testing agencies will be required to indicate specifically, the models and their variants
on which the replacement of new engine will be valid.
D. Applicable Emission Norms
Category of Engines Applicable Emission Norms
(i) Fitted in vehicles with
CVW equal to or less
than 3.5 ton
•For gasoline vehicles converted to CNG, Prevailing gasoline
engine norms for chassis dynamometer test
•For diesel vehicles converted to CNG, prevailing diesel engine
norms for chassis dynamometer lest
(ii’) Fitted in vehicles with
CVW greater than
3.5 ton
Prevailing diesel engine emission norms based on 13-mode
steady state engine dynamometer test.
E. CNG vehicle/s kit components including installation shall comply the Safety Checks as
given in Annexure IX.
F. Testing agencies shall issue every Type Approval certificate containing the “Safety and
Procedural Requirements for Type Approval of CNG and LPC Operated Vehicles” for CNG
vehicles and conversion kits, as mentioned in Annexure X.
Note:—1. For the purpose of these rules, “O.E. fitment” means the vehicles which are manufactured
for CNG operation by the vehicle manufacturer prior to their first registration.
2. “Conversion of In-use Gasoline Vehicle” means a vehicle already registered as a gasoline
vehicle and is subsequently converted for operation on CNG by fitting the conversion kit and
carrying out the other necessary changes.
3. “O.E. CNG Dedicated Vehicles” means the vehicles which are manufactured for CNG
operation by the vehicle manufacturer prior to their first registration.
4. “Converted diesel vehicle” means a vehicle already registered as a diesel vehicle and is
subsequently converted for operation on CNG by modifying the diesel engine fitted on that vehicle
by fitting the conversion kit and carrying out the other necessary changes.
130
5. ” Retro fitment” (or replacement) of diesel vehicle means a vehicle already registered as a
diesel vehicle and is subsequently converted for operation on CNG fitting a new engine adapted to
operate on CNG.
6. The AIS or IS specifications may be amended from time to time.
1[7. In case of conversion kits on in-use gasoline vehicles or converted diesel vehicles, the
validity of the type approval certificate issued by the testing agencies shall cover vehicles
manufactured between the year of manufacture of the vehicle, on which such kit has been tested and
date of the validity of the applicable norms prescribed for such category of vehicles as per clause (a)
of Item (II) of part A of rule 115-B. Testing agencies shall be required to indicate specifically the
model and their variants for diesel vehicles and capacity range of gasoline vehicles on which the
certificate shall be valid for conversion.]
2[115C. Mass emission standards for Liquefied Petroleum Gas (hereinafter in this rule
referred to as LPG), driven vehicles
3[(1) Mass emission standards for vehicles when operating on Liquefied Petroleum Gas
(hereinafter in this rule referred to as "LPG") shall be same as are applicable for gasoline vehicles
with the exception that HC shall be replaced by Reactive Hydrocarbon (RHC), where RHC=0.5 x
HC]
(2) For gasoline vehicles with Original Equipment (hereinafter in this rule referred to as
O.E.) Fitment,—
(a) In case of LPG fitment done by vehicle manufacturers on new petrol vehicles, each
model made by vehicle manufacturer shall be as type approved as per prevailing type
approval emission norms and these rules as applicable;
(b) base model and variants of such vehicle shall conform to these rules as applicable
and type approval emission norms in petrol mode as specified in these rules. In the
case of LPG mode, it shall meet mass emission norms as specified in rule 115 only
excluding crankcase and evaporative emission norms;
(c) a vehicle base model and its variants fitted with petrol tank of capacity not exceeding
5 litres, 3 litres and 2 litres on 4-wheeler, 3-wheeler and 2-wheeler respectively, shall
be exempted from mass emission tests, crankcase emission test and evaporative
emission test in petrol mode as specified in these rules, but shall comply with other
provisions of these rules as applicable;
(d) such vehicle shall be capable of bi-fuel operation such as LPG and petrol;
(e) prevalent Conformity of Production (hereinafter in this rule referred to as the COP)
procedure shall also be applicable.
(3) For in-use gasoline vehicles,—
______________________________________
1. Note 7 substituted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 16-9-2006).
2. Ins by GSR 284(E),dated 24.04.2001
3. Subs by GSR 111(E), dated 10.02.2004
131
1[(a) On and after expiry of one year from the date of publication of the Central Motor
Vehicles (Fifth Amendment) Rules, 2005 in the Official Gazette, the in-use vehicles fitted with
LPG kits shall meet the type approval emission norms specified in these rules for gasoline vehicles
as applicable to the corresponding year of manufacture of such vehicle, subject to the following
minimum norms:
(i) for the vehicles manufactured up to the 31st day of March, 2000, the type approval
norms equivalent to India-2000 (India Stage I) norms as applicable under these rules;
(ii) for the vehicles manufactured after the 1st day of April, 2000, the type approval
norms as specified in the Bharat Stage II norms, till the validity of such Bharat Stage
II norms;
(iii) for the vehicles manufactured after the 1st day of April, 2005, the type approval
norms as applicable subject to minimum of Bharat Stage III emission norms in case
of four-wheelers and Bharat Stage II emission norms for two and three-wheelers:
Provided that in respect of vehicle model/conversion kits/engine replacements type
approved and certified under rule 115-C prior to commencement of these rules (as per notification
number G.S.R. 284(E), dated the 24th April, 2001), such certificates shall cease to be valid after one
year from the date of publication of the Central Motor Vehicles (Fifth Amendment) Rules, 2005, in
the Official Gazette notwithstanding the period of validity specified in such certificates. Such
certificates need to be revalidated by testing agencies in terms of these rules:
Provided further that respective kit manufacturer/retrofitter/converters shall be free to obtain
from testing agencies type approval in terms of new rules even prior to commencement of these
rules;]
(b) for purposes of LPG kit approval, kit manufacturer or supplier shall obtain the
certificate from any of the test agencies authorised under rule 126 based on capacity
of vehicle, in the following manner, namely:—
(i) LPG kit for the vehicles shall be type approved for vehicles irrespective of make and
model based on engine capacity in cubic cm. Such a kit shall be considered fit for
retrofitment in any vehicle having engine capacity within a range of ± 25%
tolerance;
(ii) for carbureted and Multi-point fuel injection fitted vehicles, separate type approval
shall be necessary.
(4)(a) For the purpose of granting type approval to LPG kit the following performance tests
shall be carried out by the test agencies:—
(i) Mass emission tests.
(ii) Engine performance tests.
_________________________________
1. CI. (a) substituted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 16-9-2005).
132
(ii) Constant speed fuel consumption test;
(b) the tests specified under sub-clause (it) of clause (a) shall be carried out either on
engine dynamometer or chassis dynamometer as applicable under these rules.
However, in case of vehicle above 100 HP the tests shall be only on engine
dynamometer;
(c) the safety checks for such kit components including installation shall be as per the
norms and standards given in the Annexure VIII, apart from detailed test procedure
or safety guidelines contained in AIS 025 Dl, as approved by the Central
Government from time to time;
(d) for OE fitment and retro fitment on “in-use” vehicles, the responsibility of Type
Approval shall be that of the vehicle manufacturer and kit manufacturer or supplier,
respectively;
(e) the Type Approval of LPG kit for retrofitment shall be valid for three years from the
date of issue of such approval and shall be renewable for three years at a time;
(f) the retrofitment of LPG kits on in-use vehicles, shall be carried out by workshops
authorised by the kit manufacturer/kit supplier or vehicle manufacturers, as the case
may be;
(g) the test agency shall complete the test and give necessary certificate within a period
of three months from the date of receiving the kits;
(h) the kit supplier/manufacturer shall provide a layout plan for retrofitment of LPG kit
in the respective models on which any approved kit is to be installed, to the test
agency for vetting and approval. The retrofitment of the kit shall be on the basis of
such approved layout plan only.
1[* * *]
2[(6)For Diesel Vehicles with Original Equipment fitment.—3 [(i) In case of LPG fitments
by vehicles manufacturers on new diesel vehicles, each model manufactured by vehicle
manufacturers shall be type approved as per the prevailing mass emission norms as applicable for
the category of new vehicles in respect of the place of its use;]
(ii) O.E. fitment LPG engine approved for specific appropriate engine capacity can be
installed on the vehicle base model and its variants complying with the other
requirements under these rules as applicable;
(iii) Tests for particulate matter and emission of visible pollutants (smoke) under these
rules shall not be applicable; and
(iv) Prevailing COP procedures shall also be applicable;
__________________________________________
1. Sub-rule (5) omitted by G.S.R. 589(E),dated 16-9-2005 (w.e.f. 16-9-2005).
2. Inserted by G.S.R 788(E), dated 27-11 -2002 (w.e.f. 2-6-2003).
133
3. CI. (i) substituted by G.S.R.589(E),dated 16-9-2005(w.e.f. 16-9-2006).
(v) In case of limits for Hydrocarbons, the mass emission standards formula as specified
in sub-rule (1) shall be applicable.
Explanation.—In the case of O.E. fitment vehicles:—
(a) For the purpose of granting Type Approval to the vehicle manufactured by O.E., in
addition to the tests as specified in Central Motor Vehicles Rules, 1989, following
performance tests shall be carried out, as per the Table given below by the test
agency, namely:—
TABLE
SI.
No.
Test Reference Document (as amended from
time to time)
(1) (2) (3)
1. Mass emission tests MOST/CMVR/TAP-115/116 and
notification issued by the
Government of India in this respect
2. Engine performance tests IS: 14599-1999
3. Gradeability test In accordance with notification issued
under rule 124 of Central Motor Vehicles
Rules, 1989
4. Constant speed fuel consumption test IS:11921-1986 (for four-wheelers)
IS:10944-1983 (for mopeds)
IS:10881-1984 (for motor cycles and
scooters)
AIS 054 (for three-wheelers)
5. Electro-Magnetic
Interference (EMI)
In accordance with notification issued
under rule 124 of Central Motor Vehicles
Rules, 1989
6. Range test of at least 250 km for buses. For
other vehicle categories range test to be
carried out and test results to be reported.
AIS 055
7. Cooling performance IS:14557-1998
Note:—(a) The mass emission tests shall be carried out either on engine dynamometer or chassis
dynamometer, as applicable;
(b) Test procedure and safety guidelines for LPG vehicles, kit components including
installation thereof, shall be as per A IS 025, AIS 026, AIS 027 as amended from time to time, till
134
such time as corresponding BIS specifications are notified and shall be as given in Annexure-VIII in
addition to the detailed procedure of Safety Checks contained in AIS 025, AIS 026, AIS 027;
(c) For O.E. fitment manufactured vehicles, the responsibility of Type Approval shall be that
of the vehicle manufacturer;
(d) The test agency shall complete the test and give necessary certificate within a period of
three months from the date of receiving the kits.
1[(7) Replacement of In-use Diesel Engine by new LPG Engine.—For type approval of in-
use vehicle having diesel engine replaced by new Liquefied Petroleum Gas engine it shall meet the
prevailing emission norms as applicable to the category of vehicles in respect of its place of use
subject to the tests mentioned in the Table given below]:—
TABLE
SI.
No.
Test Reference Document (as amended from
time to time)
(1) (2) (3)
1. Mass emission tests MOST/CMVR/TAP-115/116 and
notification issued by the
Government of India in this respect
2. Engine performance tests IS: 14599-1999
3. Gradeability test In accordance with notification issued
under rule 124 of Central Motor Vehicles
Rules, 1989
4. Constant speed fuel consumption test IS:11921-1986 (for four-wheelers)
IS:10944-1983 (for mopeds)
IS: 10881-1984 (for motor cycles and
scooters)
AIS 054 (for three-wheelers)
5. Electro-Magnetic Interference (EMI) In accordance with notification issued
under rule 124 of Central Motor Vehicles
Rules, 1989
6. Range test of at least 250 km for buses. For
other vehicle categories range test to be
carried out and test results to be reported.
AIS 055
7. Cooling performance IS:14557-1998
Explanation.—(a) In case of in-use vehicles offered for Type Approval to the test agency
referred to in rule 126, it shall have to comply with fitness requirement, as applicable under these
rules and the said test agency may, if it thinks so, verify the same;
(b) In case of non-transport vehicles offered for retrofitment as per the tests mentioned in the
Table, it shall be the responsibility of the retrofitter to make necessary inspection/checks regarding
fitness of the such vehicles as applicable under these rules: In the case of retrofitment of in-use
________________________________________
1. Sub-R. (7) substituted byG.S.R. 589(E),dated 16-9-2005 (w.e.f. 16-9-2006).
135
transport vehicles offered for the tests mentioned in the Table, the certificate of fitness granted
under section 56 of the Act, shall be essential before the vehicle is accepted for retro
fitment/conversion;
(c) Test procedure and safety guidelines for such LPG vehicles, kit components including
installation thereof shall be as per AIS 025, as amended from time to time, till such time as
corresponding BIS specifications are notified and shall be as given in Annexure VIII in addition to
the detailed procedure or Safety checks contained in AIS 025;
(d) The test agency shall complete the test and give necessary certificate within a period of
three months from the date of the vehicle being submitted for tests; and
(e)The test agency shall be required to indicate specifically, the models and their variants on
which the replacement of new engine shall be valid.
(8) Applicable emission norms.—The emission norms as mentioned in column (3) of the
Table below excluding particulate matter shall be applicable to the corresponding categories of
engines as mentioned against them in column (2) of the said Table.
TABLE
SI.
No.
Category of Engines Applicable Emission Norms
(1) (2) (3)
1. Fitted in vehicles with G
VW equal to or less
than 3.5 ton
• For gasoline vehicles converted to LPG, prevailing
gasoline engine norms for chassis dynamometer test
•For diesel vehicles converted to LPG, prevailing diesel
engine norms for chassis dynamometer test
2. Fitted in vehicles with G
VW greater than 3.5
ton
•Prevailing diesel engine emission norms based on 13-
mode steady-state engine dynamometer test
(9) LPG vehicle/kit components including installation shall comply with the Safety Checks
as given in Annexure VIII.
(10) The test agency shall, in addition to the Type Approval Certificate, issue Safety and
Procedural Requirements for Type Approval Certificate containing the Safety and Procedural
Requirements for Type Approval oi CNG and LPG Operated Vehicles, for LPG vehicles and
conversion kits, as mentioned in Annexure X.
Note:—For the purposes of these rules,—
(1) “OE fitment” means the vehicle engines which are manufactured for LPG operation by
the vehicle manufacturer prior to their first registration;
136
(2) “Conversion of In-use gasoline vehicle” means a vehicle already registered as a gasoline
vehicle and subsequently converted for operation on LPG by fitting the conversion kit and carrying
out the other necessary changes;
(3) “O.E. fitment LPG dedicated vehicle” means a vehicle which is manufactured for LPG
operation by the vehicle manufacturer prior to their first registration;
(4) “Type approval of In-use vehicle having diesel engine replaced by new LPG engine”
means a vehicle already registered as a diesel vehicle and is subsequently converted for operation
on LPG by fitting a new engine adapted for operation on LPG;
(5) The AIS or IS specifications may be as amended and notified from time to time.]
1[(6) In case of conversion kits on in-use gasoline vehicles or replacement of in-use diesel
engines by new LPG engines, the validity of the type approval certificates issued by the testing
agencies shall cover vehicles manufactured between the year of manufacture of the vehicle, on
which such kit had been tested and the date of validity of the norms prescribed for such category of
vehicles as per clause (a) of sub-rule (3) of rule 115-C. Testing agencies shall be required to
indicate specifically, the model and their variants for diesel vehicles and capacity range of gasoline
vehicles on which the certificate shall be valid for conversion.]
116. Test for smoke emission level and carbon monoxide level for motor vehicles
2[(1) Notwithstanding any tiling contained in sub-rule (7) of rule 115 any officer not below
the rank of Sub-Inspector of Police or the Inspector of Motor Vehicles who has reason to believe
that a motor vehicle is not complying with the provisions of sub-rule (2) or sub-rule (7) of rule 115,
may, in writing, direct the driver or any person incharge of the vehicle to submit the vehicle for
conducting the test to measure the standards of emission in any one of the authorized testing
stations, and produce the certificate to an authority at the address mentioned in the written direction
within 7 days from the date of conducting the check.
(2) The driver or any person incharge of the vehicle shall upon such direction by the officer
referred to in sub-rule (1) submit the vehicle for testing for compliance of the provisions of 2[sub-
rule (2) and sub-rule (7) of rule 115], at any authorised testing station.
(3) The measurement for compliance of the provisions of 16[sub-rule (2) and sub-rule (7) of
rule 115] shall be done with a meter of the type approved by any agency referred to in rule 126 of
the principal rules or by the National Environmental Engineering Research Institute, Nagpur-440
001:
3[Provided that such a testing agency shall follow MoSRTH/CMVR/TAP-115/116 for
approval of measuring meters.]
(4) If the result of the tests indicate that the motor vehicle complies with the provisions of
16[sub-rule (2) and sub-rule (7) of rule 115], the driver or any person incharge of the vehicle shall
produce the certificate to the authority specified in sub-rule (1) within the stipulated time-limit.
________________________________
1. Note 6 inserted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 16-9-2006).
2. Substituted by G.S.R. 338(E), dated 26-3-1993(w.e.f. 26-3-1993).
3. Subs . by GSR 276(E), dated 10.04.2007
137
(5) If the test results indicate that the motor vehicle does not comply with the provisions of
the 16[sub-rule (2) and sub-rule (7) of rule 115], the driver or any person incharge of the vehicle
shall rectify the defects so as to comply with the provisions of the sub-rule (2) of rule 115 within a
period of 7 days and submit the vehicle to any authorised testing station for re-check and produce
the certificate so obtained from the authorised testing station to the authority referred to in sub-rule
(1).
(6) If the certificate referred to in sub-rule (1) is not produced within the stipulated period of
seven days or if the vehicle fails to comply with the provisions of 16[sub-rule (2) and sub-rule (7) of
rule 115] within a period of seven days, the owner of the vehicle shall be liable for the penalty
prescribed under sub-section (2) of section 190 of the Act.
(7) If the driver or any person incharge of the vehicle referred to in sub-rule (1) does not
produce the said certificate within the said period of 7 days, such vehicle shall be deemed to have
contravened the provisions of the sub-rule (2) of ride 115 and the checking officer shall report the
matter to the registering authority.
(8) The registering authority shall on receipt of the report referred to in sub-rule (7), for
reasons to be recorded in writing suspend the certificate of registration of the vehicle, until such
time the certificate is produced before the registering authority to the effect that the vehicle
complies with the provisions of ,1[sub-rule (2) and sub-rule (7) of rule 115].
(9) On such suspension of the certificate of registration of the vehicle, any permit granted in
respect of the vehicle under Chapter V or under Chapter VI of the Motor Vehicles Act, 1988 (59 of
1988) shall be deemed to have been suspended until a fresh “Pollution under control” certificate is
obtained.]
Speed governors
117. Speedometer
(1) 2[Every motor vehicle (including construction equipment vehicle), other than an invalid
carriage] or a vehicle, the designed speed of which does not exceed thirty kilometres per hour, shall
be fitted with an instrument (hereinafter referred to as “speedometer”) so constructed and fixed in
such a position as to indicate to the driver of the vehicle the speed at which the vehicle is travelling:
3[Provided that every agricultural tractor shall be fitted with an Engine RPM-cum-Hour
Meter:]
4[Provided further that the requirement of provision of speedometer is exempted for
construction equipment vehicle in which the driver's cabin rotates about a vertical axis.]
______________________________________
1. Substituted by G.S.R. 111(E), dated 10-2-2004, for “sub-rule (2) of rule 115″ (w.e.f. 10-2-2004).
2. Substituted by G.S.R. 642(E), dated 28-7-2000, for “Every motor vehicle, other than an invalid
carriage” (w.e.f. 28-7-2000).
3. Inserted by G.S.R. 338(E), dated 26-3-1993 (w.e.f 26-3-1993).
4. Inserted by G.S.R. 642(E), dated 28-7-2000 (w.e.f. 28-7-2000).
138
1[(2) On an expiry of one year and three months from the date oi commencement of the
Central Motor Vehicles (Amendment) Rules, 1999, every motor vehicle manufactured shall be
fitted with a speedometer conforming to the requirements of IS: 11827—1995 specified by Bureau
of Indian Standards.]
2[(3) On and after the commencement of the Central Motor Vehicles (Sixth Amendment)
Rules, 2000, every construction equipment vehicle manufactured shall be fitted with a speedometer
that shall confonn to the requirements of IS: 11827 specified by the Bureau of Indian Standards
concerning the speedometer.]
118. Speed governor
(1) On and from the commencement3 of this rule, such transport vehicles as may be notified
by 4[the State Government] in the Official Gazette shall be fitted by the operator of such transport
vehicle with a speed governor (speed controlling device) 5[ conforming to the Standard A IS : 018,
as amended from time to time] in such a manner that the speed governor can be sealed with an
official seal of the State Transport Authority or a Regional Transport Authority in such a way that it
cannot be removed or tampered with without the seal being broken.
(2) The speed governor of every transport vehicle shall be so set that the vehicle is incapable
of being driven at a speed in excess of the maximum preset speed of the vehicle except down an
incline.
Reduction of noise
119. Horns
(1) 6[On and after expiry of one year from the date of commencement of the Central Motor
Vehicles (Amendment) Rules, 1999, 7[every motor vehicle, agricultural tractor, power tiller and
construction equipment vehicle] manufactured shall be fitted with an electric horn or other devices
conforming to the requirements of IS: 1884—1992, specified by the Bureau of Indian Standards] for
use by the driver of the vehicle and capable of giving audible and sufficient warning of the approach
or position of the vehicle:
__________________________________________________
1 Substituted by G.S.R. 214(E), dated 18-3-1999 (w.e.f. 18-3-1999). Earlier sub-R. (2) was
substituted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
2. Inserted by G.S.R. 642(E), dated 28-7-2000 (w.e.f. 28-7-2000).
3. Brought into force on 1 st July, 1993 vide S.0.427(E), dated 27th June, 1991.
4. Substituted by G.S.R 400(E), dated 31-5-2002, for “the Central Government” (we I 31-5-2002).
5. Substituted by G.S.R. 660(E), dated 12-9-2001, for “conforming to the Indian Standards IS:
10144—1981 specified by Bureau of Indian Standards” (w.e.f. 12-9-2001). Earlier these words
were substituted by G.S.R. 214(E),dated 18-3-1999 (w.e.f. 18-3-1999) and before that by G.S.R.
933(E), dated 28-10-1989 (w.e.f. 28-10-1989).
6. Substituted byG.S.R. 214(E), dated 18-3-1999 (w.e.f. 18-3-1999).
7. Substituted by G.S.R. 589(E), dated 16-9-2005, for “every motor vehicle including construction
equipment vehicle and agricultural tractor” (w.e.f. 16-9-2006).
139
1[Provided that on and from 1st January, 2003, the 2[horn installation requirements for motor
vehicle] shall be as per 3[AIS-014] specifications, as may be amended from time to time, till such
time as corresponding Bureau of Indian Standards specifications are notified.]
(2) No 4[motor vehicle including agricultural tractor] shall be fitted with any multi-toned
horn giving a succession of different notes or with any other sound-producing device giving an
unduly harsh, shrill, loud or alarming noise.
(3) Nothing contained in sub-rule (2) shall prevent the use on vehicles used as ambulance or
for fire fighting or salvage purposes or on vehicles 5[used by police officers or operators of
construction equipment vehicles or officers of the Motor Vehicles Department] 6[in the course or
their duties or on construction equipment vehicles,] of such sound signals as may be approved by
the registering authority in whose jurisdiction such vehicles are kept.
120. Silencers
(l) 7[Every motor vehicle including agricultural tractor] shall be fitted with a device
(hereinafter referred to as a silencer) which by means of an expansion chamber or otherwise reduces
as far as practicable, the noise that would otherwise be made by the escape of exhaust gases from
the engine.
8[(2) Noise standards.—Every motor vehicle shall be constructed and maintained so as to
conform to noise standards specified in Part E of the Schedule VI to the Environment (Protection)
Rules, 1986, when tested as per IS:3028-1998, as amended from time to time]:
9[Provided that on and from the 1st day of April, 2006, where different noise levels are
prescribed for vehicles, the lowest limits prescribed for vehicles of such category, shall apply to
Battery Operated Vehicles.]
10[(3) In the case of agricultural tractor, the passby noise test and the noise level test at the
operator's ear level shall be carried out as per IS: 12180-2000, as amended from time to time and
shall conform to the levels as indicated in the Table below:—
___________________________________________________
1. Inserted by G.S.R. 400(E), dated 31-5-2002 (w.e.f. 31 -5-2002).
2. Substituted by G.S.R. 589(E), dated 16-9-2005, for “horn installation requirements” (w.e.f. 16-9-
2006).
3. Substituted byG.S.R. 111(E), da ted 10-2-2004, for “AB-014/2001″ (w.e.f. 10-2-2004).
4. Substituted by G.S.R. 111(E), dated 10-2-2004, for “motor vehicle” (w.e.f. 10-2-2004)
5. Substituted by G.S.R. 116(E), dated 27-2-2002 (w.e.f. 27-8-2002).
6. Substituted by G.S.R. 642(E), dated 28-7-2000, for “in the course of their duties” (w.e.f. 28-7-
2000).
7. Substituted by G.S.R. 111(E), dated 10-2-2004, for “Every motor vehicle” (w.e.f. 10-2-2004).
8. Substituted by G.S.R. 111(E),dated 10-2-2004(w.e.f. 10-2-2004).
9. Proviso added by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 16-9-2005).
10. Inserted by G.S.R. 111(E), dated 10-2-2004 (w.e.f. 10-2-2004).
140
TABLE
SI.
No.
Date of Implementation Bystander's Position Operator's Ear
level
(1) Six months from the date of notification 90 dB (A) 100 dB (A)
(2) Two and a half years from the date of
notification
88 dB (A) 98 dB (A).]
1[(4) In the case of power tiller with a riding attachment or power tiller coupled to trailer, the
noise level when tested as per IS:12180:2000, as amended from time to time, shall not exceed
88dB(A) at the bystander position and 98dB(A) at the operator's ear level.]
121. Painting of motor vehicles
(l) 2[No motor vehicle including 3[agricultural tractor and construction equipment vehicle]]
shall be painted in olive green colour except those belonging to the Defence Department.
(2) No contract carriage other than a tourist vehicle covered by permit under sub-section (9)
of section 88 shall be painted in the manner specified in sub-rule (11) of rule 128.
(3) No goods carriage other than a goods carriage covered by national permit shall be
painted in the manner specified in sub-rule (1) of rule 90.
Chassis number and engine number
4[122. 5[Embossment of the chassis number and engine number or in the case of battery
operated vehicles, motor number and month of manufacture:-]
(1) On and from the date of commencement of the Central Motor Vehicles (Amendment)
Rules, 1993, 6[every motor vehicle including agricultural tractor and construction equipment vehicle
other than trailer and semi-trailer] shall bear the identification number including month
and year of manufacture, embossed or etched or punched on it:
Provided that in such vehicles where space is insufficient for etching, embossing or
punching the7[engine number/motor number, chassis number and month of manufacture], the
etching, embossing or punching of year and month of manufacture shall be on an identification
plate welded or rivetted to the body of the vehicle.
_________________________________________________________________
1. Sub-R. (4) inserted byG.S.R. 589(E), dated 16-9-2005 (w.e.f. 1-10-2006).
2. Substituted by G.S.R. 642(E), dated 28-7-2000, for “No motor vehicle” (w.e.f. 28-7-2000).
3. Substituted by G.S.R. 111(E), dated 10-2-2004, for “construction equipment vehicle” (w.e.f. 10-2-2004).
4. R. 122 substituted by G.S.R. 338(E), da ted 26-3-1993 (w.e.f. 26-3-1993).
5. Substituted by G.S.R. 589(E), dated 16-9-2005, for the heading (w.e.f. 1-4-2006).
6. Substituted by G.S.R. 111(E), dated 10-2-2004, for “every motor vehicle other than trailers and semi-
trailers” (w.e.f. 10-8-2004).
7. Substituted by G.S.R. 589(E), dated 16-9-2005, for “engine number, chassis number and month of
manufacture all together” (w.e.f. 1-4-2006).
141
1[(1-A) On and from the date of commencement of the Central Motor Vehicles (Sixth
Amendment) Rules, 2000, every construction equipment vehicle shall bear the identification
number including month and year of manufacture, embossed or etched or punched on it:
Provided that in a construction equipment vehicles where the space is insufficient for etching,
embossing or punching the engine number, the chassis number and month of manufacture, the
etching, embossing or punching of year and month of manufacture shall be on an identification
plate welded or rivetted to the body of the vehicle.]
2[(2) The vehicle manufacturer shall intimate to the certifying testing agency regarding the
place where the numbers shall be embossed or etched or punched including code for the year and
month of production in respect of each model and such testing agency shall include these details in
the certificate of compliance granted by that agency under rule 126. No manufacturer shall change
the place of embossing, etching or punching and the code for the month and year of production
without prior intimation by registered post to the testing agency which granted the certificate of
compliance to these rules: Provided that in no case the height of the chassis number embossed,
etched or punched shall be less than five millimetres for vehicles having overall length less than six
metres and less than seven millimetres for the vehicle having overall length more than six metres.]
SAFETY DEVICES
Safety devices for drivers, passengers and road users
123. Safety devices in motor cycle
No motor cycle, 3[which has provision for pillion rider] shall be constructed without
provision for a permanent hand grip on the side or behind the driver’s seat and a foot rest and a
protective device covering not less than half of the rear wheel so as to prevent the clothes of the
person sitting on the pillion from being entangled in the wheel:
4[Provided that on and from 1st January, 2003, the pillion hand holds shall be governed by
IS: 14495-1998 specifications, as may be amended from time to time.]
124. Safety standards of components
5[Safety standards of components. 6[(1) The Central Government may, from time to time,
specify, by notification in the Official Gazette, the standards or the relevant standards specified by
the Bureau of Indian Standards of any part, component or assembly to be used in the manufacture of
a vehicle including construction equipment vehicle and the date from which such parts, components
or assemblies are to be used in the manufacture of such vehicle and on publication of such
notification every manufacturer shall use only such of these parts, components or assemblies in
manufacture of the vehicle:]
______________________________________________________________
1. Inserted by G.S.R. 642(E), dated 28-7-2000 (w.e.f. 28-7-2000).
2. Substituted by G.S.R. 221(E), dated 28-3-2001 (w.e.f. 28-3-2001).
3. Inserted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
4. Inserted by G.S.R. 400(E), dated 31-5-2002 (w.e.f. 31-5-2002).
5. R. 124 substituted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
6. Sub-R (1) substituted by G.S.R. 116(E), dated 27-2-2002 (w.e.f. 27-8-2002).
142
1[Provided that any notification issued under this sub-rule before the commencement of the
Central Motor Vehicles (6th Amendment) Rules, 2001, shall not be applicable after such
commencement upto and including 2[26th August, 2002] in respect of any construction equipment.]
3[(1-A) 4[On and from 1st May, 2003], the general requirements of vehicle rear under run
protecting device and the technical requirements of vehicle lateral protection side shall be as per IS:
14812-2000 specifications and as per IS: 14682-1999, respectively, as may be amended from time
to time:]
5[Provided that the vehicle manufacturers shall ensure the fitment of the rear under run
protective device in vehicles of categories N2, N3 and their trailers except special purpose vehicles
namely tractors and tippers at their end and lateral under run protective device either at their factory
or at their dealer's end. Vehicle not fitted with such devices shall not be registered under these rules.
They shall also ensure to supply necessary kits if the fitment is not done by them in the case of
lateral under-run protective device.
Provided further that the rear under run protective device shall also be painted with yellow
and white zebra stripes on the entire rear face of the device.]
6[(2) Every manufacturer shall get the prototype of the part, component or subassembly for
which standards have been notified, approved from any agency as referred to in rule 126 or the
Central Institute of Road Transport, Pune, or in case of compliance with notified Indian Standards
from any laboratory duly authorized by the Bureau of Indian Standards. On the basis of such
approval, every manufacturer shall also certify compliance with the provisions of this rule in Form
22.]]
7[(3) The Central Government may, by notification in the Official Gazette, frame a scheme
for marking to be affixed on any part or component or assembly to be used in the manufacture of
the vehicle and specify the date from which such parts, components or assemblies are to be used in
the manufacture of the vehicle.]
124A. Safety standards of components for agricultural tractors
8[Safety standards of components for agricultural tractors. (1) The bulbs of the following lamps
used on agricultural tractors shall conform to IST606-1979, as amended from time to time.
_________________________________________________________
1. Inserted by G.S.R. 675(E), dated 17-9-2001 (w.e.f. 17-9-2001).
2. Substituted by G.S.R. 242(E), da ted 28-3-2002, for “31st March, 2002″ (w.e.f. 28-3-2002).
3. Inserted by G.S.R. 400(E), dated 31-5-2002 (31-5-2002).
4. Substituted by G.S.R. 845(E), dated 27-12-2002, for “On and from 1st January, 2003″ (w.e.f. 27-
12-2002).
5. Provisos inserted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 16-3-2006).
6. Substituted by G.S.R. 214(E), dated 18-3-1999 (w.e.f. 18-3-1999).
7. Inserted by G.S.R 221(E), dated 28-3-2001 (w.e.f. 28-3-2001).
8. Inserted by G.S.R. 111(E), dated 10-2-2004 (w.e.f. 10-8-2004) and as corrected by vide G.S.R.
176(E), dated 5-3-2004.
143
(a) Head light main and dip;
(b) Parking light;
(c) Direction indicator lamp;
(d) Tail lamp;
(e) Reversing lamp;
(f) Stop lamp;
(g) Rear Registration mark indicating lamp; and
(h) Top light.
(2) The lighting and light signalling devices for agricultural tractor shall be in accordance
with AIS:030, as amended from time to time, till such time the corresponding BIS standard is
notified:
Provided that the performance requirements of the lighting, light signalling and indicating
systems of agricultural tractor manufactured on and from 57[ 1st October, 2005] shall be in
accordance with safety standard AIS:062, as amended from time to time, till such time
corresponding BIS standards are notified.
(3) The hydraulic brake hoses wherever used in agricultural tractor and its trailer shall be in
accordance with IS:7079-1995, as amended from time to time.
(4) The vegetable, non-mineral based hydraulic fluids wherever used in agricultural tractor
shall be in accordance with IS:8654-1986, as amended from time to time.
(5) The tow hook wherever used in agricultural tractor shall be in accordance with IS:12362
(Part 2), as amended from time to time.
(6) The fuel tanks of agricultural tractor shall comply with the requirements laid down in IS:
12056-1987, as amended from time to time:
Provided that the clause 3.2.1 of IS:12056-1987 be exempted for agricultural tractor that
have a gravity feed fuel flow system.
(7) The wheel nuts and hub caps used in agricultural tractor shall be in accordance with
IST3941-1994, as amended from time to time.]
1[124B. Safety Standards of components for power tillers
(1) The lamps and bulbs used on power tillers for—
(a) the head light main and dip;
_________________________________________
1. Rule 124-B ins. By GSR 589(E), dated 16.09.2005(w.e.f. 16.09.2006)
144
(b) the parking light;
(c) the direction indicator lamp;
(d) the tail lamp;
(e) the reversing lamp;
(f) the stop lamp;
(g) the rear Registration mark illuminating lamp, shall be in accordance with
AIS:034:2004 as amended from time to time till the corresponding BIS
specifications are notified under the Bureau of Indian Standards Act, 1986 (63 of
1986).
(2) The lighting and signaling devices shall be in accordance with AIS:062:2004 as
amended from time to time, till the corresponding BIS specifications are notified under the Bureau
of Indian Standards Act, 1986 (63 of 1986).
(3) The safety and comfort of the operator of a power tiller shall be in accordance with
IST2239 (Part 3):1996, as amended from time to time.
(4) The gradeability of a power tiller coupled to a trailer under the declared combination
weight by the manufacturer shall be in accordance with IS:9980:1988, as amended from time to
time.]
1[125. Safety belt, collapsible steering column, auto dipper and padded dash boards
2[(1)] One year from the date of commencement of the Central Motor Vehicles
(Amendment) Rules, 1993, the manufacturer of every motor vehicle other than motor cycles and
three-wheelers 3[***], shall equip every such vehicle with a seat belt for the driver and for the
person occupying the front seat.
4[(1-A) The manufacturer of every motor vehicle of M-l category shall equip every motor
vehicle with a seat belt for a person occupying the front facing rear seat:
Provided that the specifications of Safety Belt Assemblies and Safety Belt Anchorages in
motor vehicles shall conform to AIS: 005-2000 and 5[IS: 15140-2003 and IS:15139-2002
respectively, ]:
Provided further that on and after 1st October, 2002, the specification of Safety Belt
Assemblies and Safety Belt Anchorages in motor vehicles shall conform to 6[IS: 15140-2003 and
IS:15139-2002 respectively,]]
_______________________________________________________________
1. R. 125 substituted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
2. R. 125 renumbered as sub-R. (1) thereof by G.S.R. 720(E), dated 10-9-2003 (w.e.f. 10-10- 2003).
3. The words “of engine capacity not exceeding 500 cc” omitted by GSR 276(E), dated 10.4.2007)
4. Sub-R. (1-A) substituted by G.S.R. 400(E), dated 31 -5-2002 (w.e.f. 31-5-2002).
5. Subs by GSR 784(E),dated 12.11.2008 (w.e.f. 01.4.2009)
6. Subs. By GSR 784 (E), dated 12.11.2008 (w.e.f 01.04.2009)
145
1[(1B) on and after the 1 st day of October,2009, the front under protective after 1 st day of
October, 2009 shall comply with the requirements specified in AIS:069-2006, till the corresponding
BIS specifications are devices fitted on N2 and N3 categories of motor vehicles, manufactured or
notified under the Bureau of Indian Standards, Act, 1986 ( 63 of 1986).
(1C) on and after the 1 st day of April, 2009, the temporary cabin fitted on drive away
chassis vehicles of category M and N, manufactured on and after the 1 st day of October, 2008 that
are driven off from the factory premises for purposes of body building, shall comply with the
requirements specified in AIS:070-2004 till the corresponding BIS specifications are notified under
the Bureau of Indian Standards, Act, 1986 ( 63 of 1986)
(2) Six months from the date of commencement of the Central Motor Vehicles
(Amendment) Rules 1993, all motor vehicles shall be equipped with rear view mirror.
2[Provided that 3[on and from 1st May, 2003], the rear view mirror specifications and
installation requirements shall be as specified by AIS: 001- 2001 and AIS: 002-2001 respectively,
as may be amended from time to time, till such time as corresponding Bureau of Indian Standards
specifications are notified.]
4[* * *|
5[* * *]
6[(5) On and after 1st January, 2003, the size and specifications on seats, their Anchorages
and Head Restraints (excluding luggage retention) on M-l vehicle category shall conform to A1S :
016-2000 specifications, as may be amended from time to time, till such time as corresponding
Bureau of Indian Standards specifications are notified.]
7[(6) On and from the 1st day of October, 2007, the seats, their anchorages and their head
restraints for M2, M3, Nl, N2 and N3 category of vehicles, shall be in accordance with
AIS:023:2005 as amended from time to time till the corresponding BIS specifications are notified
under the Bureau of Indian Standards Act, 1986 (63 of 1986).]
8[125A. Safety belt, etc., for construction equipment vehicles
One year from the date of commencement of the Central Motor Vehicles (Sixth
Amendment) Rules, 2000, the manufacturer of every construction equipment vehicle other than an
agriculture tractor shall equip every such vehicle with a seat belt for the driver and for the person
occupying the front seat, and with a rear view mirror.]
_______________________________________________________
1. Ins by GSR 784 (E), dated 12.11.2008 ( w.e.f. 12.11.2008)
2. Inserted by G.S.R. 400(E), dated 31-5-2002 (w.e.f. 31-5-2002).
3. Substituted by G.S.R. 845(E), dated 27-12-2002, for “on and from 1st January, 2003″ (w.e.f. 27-
12-2002).
4. Sub-R. (3) omitted by G.S.R. 29(E), dated 15-1-1998 (w.e.f. 15-1-1998).
5. Sub-R. (4) omitted by G.S.R. 659(E), dated 12-9-2001 (w.e.f. 12-9-2001).
6. Inserted by G.S.R. 400(E),dated 31-5-2002 (w.e.f. 31-5-2002).
7. 348 Sub-R. (6) inserted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 16-9-2005).
8. Inserted by G.S.R. 642(E), dated 28-7-2000 (w.e.f. 28-7-2000).
146
1[125B. Special requirements for transport vehicles that are driven on hills
(1) On and from the 1st day of October, 2006, such four wheeled transport vehicles as may
be notified by State Governments in the Official Gazette plying on such routes or areas in hilly
terrains shall be fitted with fog lamp, power steering, defogging and demisting system and that the
State Government would provide a lead time of six months for this purpose.
(2) Anti-Lock Braking System shall be introduced in all M-2 category buses including those
plying on All India Tourist Permit on and from the 1st day of October, 2007 in hill areas.
2[125C. Body building and approval
(1) On a date to be notified, the testing and approval for body building of buses shall be
accordance with AIS:052:2001 as amended from time to time for vehicles mentioned therein, till the
corresponding BIS specifications are notified under the Bureau of Indian Standards Act, 1986 (63 of
1986).
(2) The testing and approval for the body building of school buses shall be iii accordance
with AIS:063:2005 as amended from time to time for vehicles mentioned therein, till the
corresponding BIS specifications are notified under the Bureau of Indian Standards Act, 1986 (63
of.1986).]
3[126. Prototype of every motor vehicle to be subject to test
On and from the date of commencement of Central Motor Vehicles (Amendment) Rules,
1993, every 71 [manufacturer or importer] of motor vehicles other than trailers and semi-trailers
shall submit the prototype of the vehicle [to be manufactured or imported by him] for test by the
Vehicle Research and Development Establishment of the Ministry of Defence of the Government of
India or Automotive Research Association of India, Pune, 4[or the Central Machinery Testing and
Training Institute, Budni (MP)], or the Indian Institute of Petroleum, Dehradun, 5[or the Central
Institute of Road Transport, Pune, or the International Centre for Automotive Technology,
Manesar,] 6[or the Northern Region Farm Machinery Training and Testing and Testing Institue,
Hissar (for testing of combine harvester)] and such other agencies as may be specified by the
Central Government for granting a certificate by that agency as to the compliance of provisions of
the Act and these rules:]
7[Provided that the procedure for type approval of certification of motor vehicles for
compliance to these rules shall be in accordance with the A1S: 017-2000, as amended from time to
time:]
_______________________________________________________________________
1. Rules. 125-B and 125-C inserted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 16-9-2005).
2. Ins by GSR 589 (E), dated 16.09.2005.
3. Subs by 338(E), dated 26.03.1993
4. Subs by 276(E), dated 10.04.2007.
5. Added by GSR 276 (E), dated 10.04.2007.
6. Ins by GSR 84(E), dated 09.02.2009
7. Ins by GSR 400 (E), dated31.05.2002
147
1[Provided further that in respect to the vehicles imported into India as completely built units
(CBU), the importer shall submit a vehicle of that particular model and type to the testing agencies
for granting a certificate by that agency as to the compliance to the provisions of the Act and these
rules.]
126A. The testing agencies referred to in rule 126
2[The testing agencies referred to in rule 126 shall, in accordance with the procedures laid
down by the Central Government, also conduct tests on vehicles drawn from the production line of
the manufacturer to verify whether these vehicles conform to the provisions of 3[rules made under
section 110 of the Act:]]
4[Provided that in case the number of vehicles sold in India for a given base model and its
variants (manufactured in India or imported to India) are less than 250 in any consecutive period of
six months in a year, then such base model and its variants need not be subjected to the above test,
if at least one model or its variants manufactured or imported by that manufacturer or importer, as
the case may be, is subjected to such tests at least once in a year:
Provided further that, in case the number of base models and its variants
manufactured/imported is more than one and if the individual base model and its variants are less
than 250 in any consecutive period of six months in a year, then the testing agencies can pick up
one of the vehicles out of such models and their variants once in a year for carrying out such test.]
5[126B. Prototype of every construction equipment vehicle to be subject to test
(1) On and from the date of commencement of the Central Motor Vehicles (Sixth
Amendment) Rules, 2000, every manufacturer of construction equipment vehicle shall submit the
prototype of the construction equipment vehicle to be manufactured by him for test by any of the
agencies referred to in rule 126 for granting a certificate by that agency as to the compliance of
provisions of the Act and these rules.
(2) The testing agencies referred to in rule 126 shall in accordance with the procedure laid
down by the Central Government conduct tests on vehicles drawn from the production line of the
manufacturer to verify whether the vehicles conform to the provisions of the Act, or rules or orders
issued thereunder shall be renumbered as subrule (1) thereof and after sub-rule (1) as so,
renumbered:]
6[Provided that the provisions of this sub-rule shall not be applicable in respect of any
construction equipment upto and including 3[26th August, 2002.]
______________________________________________________________
1. Ins by GSR 111(E), dated 10.02.2004( w.e.f. 10.08.2004)
2. Ins by GSR 338 (E), dated 26.03.1993
3. Subs by GSR 221(E), dated 28.03.2001
4. Ins by GSR 400(E), dated 31.05.2002
5. Ins by GSR 642 (E), dated 28.07.2000
6. Ins by GSR 675 (E), dated 17.09.2001
148
127. Quality certificate by manufacturer
1[(1)] On and from the date2 of commencement of this rule, the sale of every motor vehicle
manufactured shall be accompanied by a certificate of road-worthiness issued by the manufacturer
in Form 22.
3[(2) On and from the date of commencement of the Central Motor Vehicles (Sixth
Amendment) Rules, 2000, the sale of every construction equipment vehicle manufactured shall be
accompanied by a certificate of road-worthiness issued by the manufacturer in Form 22.]
Special provisions
128. Tourist vehicles other than motor cabs, etc.
A tourist vehicle other than motorcab, taxicab, campers van house trailer, shall conform to
the following specifications, namely:—
4[(1) The dimension shall conform to the dimensions specified in rule 93.]
(2) Structure.—Structure of the tourist vehicle should be sturdy and strong structural frame
work using suitable material of adequate sectional area and an aerodynamical shape. For exterior
panelling, aluminium sheet or good quality panelling material should be used. As regards interior
panelling it should cover the entire interior roof, sides, back and bulk head portions. The body
should be made completely leakproof and dustproof. The vehicle should also be rattle proof. Sound
deadening should also be done for all panelling including the floor.
5[(3) Passenger entrance and exit.—The passenger entrance-cum-exit door shall be located
on the left side of the vehicle and minimum door width shall be 685 millimetres. The door handle
should be capable of being handled from inside as well as from outside. The door may be operated
pneumatically or hydraulically or electrically with suitable locking devices.]
6[(4) Emergency exit.—The emergency exit provided on the tourist vehicle shall meet the
following requirements, namely:—
(i) be clearly marked "EMERGENCY EXIT" in bold letters on the inside and the
outside of the tourist vehicle;
(ii) be so designed as to open from inside and the outside of the tourist vehicle;
(iii) be equipped with a fastening device which can be quickly released but so designed
as to offer protection against accidental release;
_______________________________________________________________
1. R. 127 renumbered as sub-R. (1) thereof by G.S.R. 642(E), dated 28-7-2000 (w.e.f. 28-7-2000).
2. 1st day of April, 1991 videS.0.941(E), dated 11th December, 1990.
3. Inserted by G.S.R. 642(E), dated 28-7-2000 (w.e.f. 28-7-2000).
4. Substituted by G.S.R. 933(E), dated 28-10-1989 (w.e.f. 28-10-1989).
5. Sub-R. (3) substituted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
6. Sub-R. (4) substituted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 16-9-2006).
149
(iv) be easily accessible to persons of normal height standing on the ground outside the
vehicle;
(v) be easily accessible to the passengers;
(vi) be such that no seat or other object placed in the vehicle shall restrict the passage to
the emergency door;
(vii) be located either at the back or on to the right hand side of the vehicle; and
(viii) emergency exist may be provided in the form of a window with breakable glass. In
such cases, a suitable device shall be provided at a convenient place to break open
the glass in the event of an emergency.]
(5) Driver entry and exit.—A separate door with suitable sliding window shall be provided
for the driver near the driver seat.
(6) Windscreen.—(i) The front windscreen shall be of clear view and distortion free, with
safety glass and shall be of full width of the tourist vehicle. If made in two halves, the width of the
centre vertical joint, inclusive of the rubber glazing fitment of the front windshield shall be such as
to enhance the elegance of the tourist vehicle.
(ii) Rear windscreen shall be of safety glass or laminated safety glass. It shall match with
the windows provided on the vehicle. Sliding curtains shall be provided on the rear
windscreen.
(7) Windows.—Windows of tourist vehicles should have a minimum space of 14.25
millimetres and shall be of safety or laminated safety glass.
Windows shall be of double sliding type slider running smoothly in channels without rattle.
All safety or laminated safety glasses used for windows should conform to standards laid down by
the Bureau of Indian Standards. Windows shall be provided with sliding curtains.
(8) Ventilation.—Adequate arrangements shall be provided for ventilation for the passenger
compartment as well as the driver compartment. All ventilators and windows shall be such that
when closed they will not permit ingress of rain water or dust in the passenger or driver
compartment.
(9) Luggage.—(i) Luggage holds shall be provided at the rear or at the sides, or both, of the
tourist vehicle with sufficient space and size, and shall be rattleproof, dustproof and waterproof with
safety arrangements;
(ii) The light luggage racks, on strong brackets shall be provided inside the passenger
compartment running along the sides of the tourist vehicle. Except where nylon
netting is used, the under side of the rack shall have padded upholstery to protect the
passengers from an accidental hit. The general design and fitment of the rack shall be
so designed as to avoid sharp corners and edges.
(10) Seats and seating arrangements.—1[* * *]
_______________________________
1. Sub-Cl. (z) omitted by G.S.R. 933(E), dated 28-10-1989 (w.e.f. 28-10-1989).
150
(ii) Seating layout shall be 1[two and two or one and two or one and one] on either side,
all seats facing forward, with a clear gangway of at least 355 millimetres width at the
centre. Each passenger seat shall have a minimum area of 447 millimetres x 457
millimetres and an arm rest on both sides and seat back of full height.
(iii) The seat frames shall be sturdy, properly finished and so mounted as to transfer the
weight directly to the structural members of frame-work. The seats shall be of
reclining type and adjustable.
(iv) The seats shall be so mounted as to provide at least 280 millimetres leg room from
the front of the rear seat to the back of the front seat. A foot rest at suitable location
and height shall be provided for every passenger.
(11) Painting and finishing.—The tourist vehicle shall be painted in a manner referred to in
sub-rules (7) and (8) of rule 85-A in white colour with a blue ribbon of five centimetres width at the
centre of the exterior of the body.
(12) Lighting.—(i)(a) The passenger compartment shall be adequately illuminated.
(b) Arrangement shall be provided to eliminate reflection of the light from the passenger
compartment on the windscreen.
(c) In addition to the lights in passenger compartment, at least two night-lights with
coloured domes, shall be provided in the passenger compartment.
(ii) Front and rear destination boxes, if provided, shall be illuminated.
(iii) One independently operated light fitting shall be provided for illumination of the
driver’s or attendant’s seat area.
(iv) A light fitting shall be provided for illuminating the steps at the passenger entrance
door.
(7) Each luggage hold shall have a light fitting for illumination of that hold.
(vi) Wiring in the passenger compartment shall be with low tension cable conforming to IS: 2465 of
size commensurate with the estimated current loading. The wires shall be carried in PVC sleevings
or conduit or casing of adequate size. When any wire passes through a hold in a panel or sheet
metallic components, a rubber grommet of adequate size shall be provided for protection of the
insulation.
(13) Fittings and accessories.—A tourist vehicle shall be equipped with the following,
namely:—
(i) Convex rear view mirrors one on each side, universally adjustable and of adequate
dimensions.
(ii) First-aid box with glazed front, with necessary medicines for first-aid.
____________________________________
1. Substituted by G.S.R 933(E), dated 28-10-1989, for “two and two” (w.e.f. 28-10-1989)
151
(iii) Fire extinguisher, dry powder type located near the engine compartment.
(iv) Insulation on interior or exterior of the engine bonnet for reducing the noise and heat
from the engine.
(v) Provision for locating vehicle tools securely.
(vi) Heavy duty windscreen wiper system.
(vii) Adjustable sunvisors of adequate size for the driver and for the attendant.
(viii) Electrically operated wide indicators or blinkers, stop lights and parking lights.
(ix) Dual head lamps.
(x) Suitable illumina tion for the registration number plate at the rear.
(xi) Horn.
(xii) Electric fans, of 8 inches* sweep adjustable, at least eight in number, suitably spaced
in the passenger compartment and controlled by switches located near the seat.
(xiii) Electric bell or buzzer located near the seat of driver or attendant and operated by at
least four push button controls placed at suitable location in the passenger
compartment.
(xiv) Ash trays near passenger seats of a design convenient for cleaning them at
intermediate stops of the tourist vehicle.
(xv) Drinking water and ice-box.
(xvi) Rack for magazines and other reading material.
(xvii) Back pockets and numbers for each seat.
(xviii) Public address system with at least four speakers suitably located in the passenger
compartment.
(xix) Document frame, located near the seat of driver, for carrying vehicle documents, tax
token, licence and permit.
(xx) Mud flaps for front and rear wheels:
1[Provided that the provisions of clauses (2) and (7), sub-clause (iv) of clause (12), sub-
clauses (ix), (xii) and (xiii) of clause (13), of this rule shall not apply to the vehicles of integral
construction.]
——————-
1. Added by G.S.R. 933(E) daled 28-10-1989 (w.e.f. 28-10-1989).
152
1[128A. Special provision for M3 category of vehicles
The provisions of sub-rule (4) of rule 128 shall apply to all M3 category of vehicles.]
129. Transportation of goods of dangerous or hazardous nature to human life
(1) Every owner of a goods carriage transporting any dangerous or hazardous goods shall, in
addition to complying with the provisions of any law for the time being in force in relation to any
category of dangerous or hazardous goods, comply with the following conditions, namely:—
(i) every such goods carriage, carrying the same type of dangerous or hazardous goods
(whether in bulk or in packages), shall display a distinct mark of the class lable
appropriate to the type of dangerous or hazardous goods specified in column 3 of the
Table I to rule 137;
(ii) every package containing dangerous or hazardous goods shall display the distinct
class labels appropriate to the type of dangerous or hazardous goods specified in
column 3 of the Table I to rule 137;
(iii) in the case of packages containing goods listed in Table 111 in rule 137 and which
represents two hazards as given in column 2 thereof, such packages shall display
distinct labels to indicate both the hazards;
2[(iv) every goods carriage carrying any dangerous or hazardous goods shall be equipped
with safety equipments for preventing fire, explosion or escape of hazardous or
dangerous goods.]
3[(2) One year from the date of commencement of Central Motor Vehicles (Amendment)
Rules, 1993, every goods carriage carrying goods of dangerous or hazardous nature to human life,
shall be fitted with techograph (an instrument to record the lapse of running time of the motor
vehicle; time speed maintained, acceleration, deceleration, etc.) conforming to the specifications of
the Bureau of Indian Standards.]
4[129A. Spark arrester
Six months from the date of commencement of Central Motor Vehicles (Amendment) Rules,
1993, every goods carriage carrying goods of dangerous or hazardous nature to human life shall be
fitted with a spark arrester.]
130. Manner of display of class labels
(1) Where a class label is required to be displayed on a vehicle, it shall be so positioned that
the size of the class label is at an angle of 45 degrees to the vertical and the size of such label shall
not be of less than twenty-five millimetres square which may be divided into two portions, the
upper half portion being reserved for the pictorial symbol and the lower half for the text:
____________________________________
1. R. 128-A inserted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 16-9-2007).
2. Added by G.S.R. 933(E) daled 28-10-1989 (W.e.f. 28-10-1989).
3. Added byG.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
4. Inserted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
153
Provided that in the case of smaller packages a suitable size of the label may be adopted.
(2) Where the class label consists of adhesive material, it shall be waterproof and where it
consists of metal or other substance on which the pictorial symbol and the text are printed, painted
or affixed, they shall be affixed directly on such material and in every case, the surface of the
vehicle surrounding the label shall be of a colour that contrasts vividly with the background of the
class label.
(3) Every class label displayed on a vehicle shall be positioned in such a manner that it does
not obscure other markings required to be displayed under any other law.
(4) Every goods carriage carrying any dangerous or hazardous goods shall display the class
label on the places shown in the Table in rule 134.
1[131. Responsibility of the consignor for safe transport of dangerous or hazardous goods
(1) It shall be the responsibility of the consignor intending to transport any dangerous or
hazardous goods listed in Table III, to ensure the following, namely:—
(a) the goods carriage has a valid registration to carry the said goods;
(b) the vehicle is equipped with necessary first-aid, safety equipment a nd
antidotes as may be necessary to contain any accident;
(c) that the transporter or the owner of the goods carriage has full and adequate
information about the dangerous or hazardous goods being transported; and
(d) that the driver of the goods carriage is trained in handling the dangers posed during
transport of such goods.
(2) Every consignor shall supply to the owner of the goods carriage, full and adequate
information about the dangerous or hazardous goods being transported as to enable such owner and
its driver to,—
(a) comply with the requirements of rules 129 to 137 (both inclusive) of these rules; and
(b) be aware of the risks created by such goods to health or safety of any person.
(3) It shall be the duty of the consignor to ensure that the information is accurate and
sufficient for the purpose of complying with the provisions of rules 129 to 137 (both inclusive) of
these rules.]
2[132. Responsibility of the transporter or owner of goods carriage
(1) It shall be the responsibility of the owner of the goods carriage transporting any dangerous or
hazardous goods to ensure the following, namely:—
_________________________________________________
1. R. 131 substituted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
2. R. 132 substituted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
154
(a) that the goods carriage has a valid registration to carry the said goods and the said
carriage is safe for the transport of the said goods; and
(b) the vehicle is equipped with necessary first-aid, safety equipment, tool box and
antidotes as may be necessary to contain any accident.
(2) Every owner of a goods carriage shall, before undertaking the transportation of
dangerous or hazardous goods in his goods carriage, satisfy himself that the information given by
the consignor is full and accurate in all respects and correspond to the classification of such goods
specified in rule 137.
(3) The owner of a goods carriage shall ensure that the driver of such carriage is given all
the relevant information in writing as given in Annexure V of these rules in relation to the
dangerous or hazardous goods entrusted to him for transport and satisfy himself that such driver has
sufficient understanding of the nature of such goods and the nature of the risks involved in the
transport of such goods and is capable of taking appropriate action in case of an emergency.
(4) The owner of the goods carriage carrying dangerous or hazardous goods, and the
consignor of such goods shall lay down the route for each trip which the driver shall be bound to
take unless directed or pennitted otherwise by the Police Authorities. They shall also fix a time table
for each trip to the destination and back with reference to the route so laid down.
(5) It shall be the duty of the owner to ensure that the driver of the goods carriage carrying
dangerous or hazardous goods holds a driving licence as per provisions of rule 9 of these rules.
(6) Notwithstanding anything contained in rules 131 and 132, it shall be sufficient
compliance of the provisions of these rules if the consignor transporting dangerous or hazardous
goods and the owner of the goods carriage or the transporter, abides by these conditions within six
months after the date of coming into force of the Central Motor Vehicles (Amendment) Rules,
1993.]
1[133. Responsibility of the driver
(1) The driver of a goods carriage transporting dangerous or hazardous goods shall ensure
that the information given to him in writing under sub-rule (3) of rule 132 is kept in the driver's
cabin and is available at all time while the dangerous or hazardous goods to which it relates, are
being transported.
(2) Every driver of a goods carriage transporting any dangerous or hazardous goods shall
observe at all times all the directions necessary for preventing fire, explosion or escape of
dangerous or hazardous goods carried by him while the goods carriage is in motion, and when it is
not being driven he shall ensure that the goods carriage is parked in a place which is safe from fire,
explosion and any other risk, and at all times the vehicle remains under the control and supervision
of the driver or some other competent person above the age of 18 years.]
134. Emergency information panel
(1) Every goods carriage used for transporting any dangerous or hazardous goods shall be
legibly and conspicuously marked with an emergency information panel in each of the three places
__________________________________________________________
1. R. 133 substituted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
155
indicated in the Table below so that the emergency information panel faces to each side of the
carriage and to its rear and such panel shall contain the following infonnation, namely:—
(i) the correct technical name of the dangerous or hazardous goods in letters not less
than 50 millimetres high;
(ii) the United Nations class number for the dangerous or hazardous goods as given in
Column 1, Table 1 appended with rule 137, in numerals not less than 100 milimetres
high;
(iii) the class label of the dangerous or hazardous goods of the size of not less than 250
millimetres square;
(iv) the name and telephone number of the emergency services to be contacted in the
event of fire or any other accident in letters and numerals that are not less than 50
millimetres high and the name and telephone number of the consignor of the
dangerous or hazardous goods or of some other person from whom expert
information and advice can be obtained concerning the measures that should be
taken in the event of an emergency involving such goods.
1[(2) The information contained in sub-rule (1) shall also be displayed on the vehicle by
means of a sticker relating to the particular dangerous or hazardous goods carried in that particular
trip.]
2[(3)] Every class label and emergency information panel shall be marked on the goods
carriage and shall be kept free and clean from obstructions at all times.
——————–
1. Inserted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
2. Sub-R. (2) renumbered as sub-R (3) byG.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
156
PLACES FOR FIXING EMERGENCY INFORMATION PANELS ON VEHICLES AND
DIMENSIONS
157
(All dimensions are expressed in millimetres)
135. Driver to be instructed
The owner of every goods carriage transporting dangerous or hazardous goods shall ensure
to the satisfaction of the consignor that the driver of the goods carriage has received adequate
instructions and training to enable him to understand the nature of the goods being transported, by
him, the nature of the risks arising out of such goods, precautions he should take while the goods
carriage is in motion or stationary and the action he has to take in case of any emergency.
136. Driver to report to the police station about accident
1[Driver to report to the police station about accident. The driver of a goods carriage
transporting any dangerous or hazardous goods shall, on the occurrence of an accident involving
any dangerous or hazardous goods transported by this carriage, report forthwith to the nearest police
station and also inform the owner of the goods carriage or the transporter regarding the accident.]
137. Class labels
In respect of the dangerous or hazardous goods specified in column (2) of the Table below,
the labels specified in the corresponding entry in column (3) shall be the class labels, namely:—
________________________
1. Substituted by G.S.R.338(E),dated 26-3-1993 (w.e.f. 26-3-1993).
158
147
TABLE I
Class of Labels
UN Class Classification of goods Class label
No.
(1) (2) (3)
1. Explosives
Symbol (exploding bomb) : Black
Background : Orange
2. Gases, compressed, liquefied, dissolved under pressure
or deeply refrigerated.
2.1 Non-flammable gases
Symbol (gas cylinder) : Black or White
Background : Green
2.2 Inflammable gases
Symbol (Flame) : Black or White
Background : Red
159
148
2.3 Poison (toxic) gases
Symbol (skull and crossbones) : Black
Background : White
_______________________
3. Inflammable Liquids
Symbol (flame) : Black or White
Background : Red
4. Inflammable solids, substances liable to spontaneous
combustion; substances which, on contact with water, emit
inflammable gases.
4.1 Inflammable solids
4. Inflammable solids, substances liable to spontaneous combustion; substances which, on contact with water,
emit inflammable gases.
4.1 Inflammable solids
160
149
4.2 Substances liable to spontaneous combustion
Symbol (flame) : Black
Background : Upper half white
4.3 Substances which, on contact with water, emit inflammable gases
Symbol (flame) : Black or Whi te
Background : Blue
5. Oxidizing substances and organic peroxides.
5.1 Oxidizing substances
Symbol (flame over circle) : Black
Background : Yellow
161
150
5.2 Organic peroxides
6. Poisonous (toxic) substances and infectious substances.
6.1 Poisonous (toxic) substances
6.2 Harmful substances
162
151
6.3 Infectious substances
7. Radioactive substances
8. Corrosives
163
1TABLE II
Indicative criteria
(A) Explosives:
An explosive means a solid or liquid or pyrotechnic substance (or a mixture of substances)
or an article,—
(i) which is in itself capable by chemical reaction of production of gas at such a
temperature and as such a speed as to cause damage to the surroundings;
(ii) which is designed to produce an effect, by heat, light, sound, gas or smoke or a
combination of these, of non-detonative self-sustaining exothermic chemical
reaction.
(B) Gas:
(1) A gas is a substance which—
(i) at 50°C has a vapour pressure greater than 300 kPa; or
(ii) is completely gaseous at 20°C at a standard pressure of 101.3 kPa.
(2) Substances of gas are assigned to one of three following divisions based on the primary
hazard of the gas during transport;
(a) Flammable gases:
Gases which at 20°C and a standard pressure of 101.3 kPa,—
(i) are igni table when a mixture of 13 per cent or less by volume with air; or
(ii) have a flammable range with air of at least 12 percentage points regardless of the
lower flammable limit. Flammability shall be determined by tests or by calculation in
accordance with methods adopted by International Standards Organization [ISO:
10156:1996] or by Bureau of Indian Standards [IS: 1446-1985 ];
(b) Non-flammable, non-toxic gases:
Gases which are transported a pressure not less than 280 kPa at 20°C, or as refrigerated
liquids and which,—
(i) are asphyxiant-gases which dilute or replace the oxygen normally in the atmosphere;
(ii) are oxidizing-gases which may, generally by providing oxygen, cause or contribute
to the combustion of other material more than air does; or {Hi) do not come under
the other divisions;
(c) Toxic gases:
_________________________
1. Substituted by G.S.R. 349(E), dated 1-6-2005, for Table H and Table HI (w.e.f. 1-6-2005).
164
Gases which are known to be so toxic or corrosive to humans as to pose a hazard to health.
Note.—Gases meeting the above criteria owing to their corrosivity are classified as toxic with a
subsidiary corrosive risk. (C) Flammable chemicals:
(i) Flammable gases.—Gases which at 20°C and at standard pressure of 101.3 kPa are:—
(a) ignitable when a mixture of 13 per cent or less by volume with air, or
(b) have a flammable range with air of at least 12 percentage points regardless of the
lower flammable limits.
Note.—The flammability shall be determined by tests or by calculation in accordance with
methods adopted by International Standards Organization (ISO: 10156: 1996) or by Bureau of
Indian Standards (IS: 1446-1985).
(ii) Extremely flammable liquids.—Chemicals which have flash point lower than or
equal to 23°C and boiling point less than 35°C.
(iii) Very highly flammable liquids.—Chemicals which have a flash point lower than or
equal to 23°C and initial boiling point higher than 35°C.
(iv) Highly flammable liquids.—Chemicals with a flash point lower than or equal to
60°C but higher than 23°C.
(v) Flammable liquids.—Chemicals which have a flash point higher than 60°C but lower
than 90°C. (D) Reactive Substances:
Reactive substances are those substances which start reacting chemically with any other
material and reducing gases through their own decomposition. Such substances are Inorganic
Alkalies (for example NaoH, Iodine and the like) and Acids (for example H2S04, HN03, HCL and
the like)
(vi) Oxidizing Substances:
(a) Oxidizing substances:
Substances which, while in themselves not necessarily combustible, may generally by
yielding oxygen, cause or contribute to the combustion of other material. Such substances may be
contained in an article;
(b) Organic peroxides:
Organic substances which contain the bivalent-0-0- structure and may be considered
derivative of hydrogen peroxide, where one or both of the hydrogen atoms have been replaced by
organic radials. Organic peroxides are thermally unstable substances which may undergo
exothermic self-accelerating decomposition. In addition, they may have one or more of the
following properties, — (i) be liable to explosive decomposition;
(ii) burn rapidly;
165
(iii) be sensitive to impact or friction; (iv) react dangerously with other substances; (v)
cause damage to the eyes. (F) Toxic:
Toxic chemicals:—Chemical having the following values of acute toxicity and which owing
to their physical and chemical properties, are capable of producing major accident hazards:—
Sl.
No.
Toxicity Oral
toxicity
(mg/kg)
Dermal toxicity (mg/kg) Inhalation toxicity (mg/I)
1 Extremely toxic >5 <40 <0.5
2 Highly toxic >5-50 >40-200 <05-2.0
3 Toxic >50-200 >200-1000 >2-10
________________________________________________________
1 LD50 oral in rats
2 LD50 coetaneous in rats or rabbits
3. LC50 by inhalation (four hours) in rats.
(G) Radioactive:
Radioactive materials mean any material containing radionuclide where both the activity
concentration and the total activity in the consignment exceed the values specified, depending on
the type of material by the Atomic Energy Commission of India.
(H) Corrosive:
Corrosive substances are substances which by chemical action will cause severe damage
when in contact with living tissue or in the case of leakage will materially damage or even destroy
other goods or the means of transport. They may also cause other hazards.
166
E—Explosive, F—Flammable, O—Oxidising, R—Reactive, C—Corrosive,
Ra—Radioactive, T—Toxic, G—Gas.
TABLE III
List of Hazardous Goods
Sr.
No.
Name E F O R c
:
Ra T G
1 1 Hexene E F
2 1 Methylpiperidine F
3 1,1-Difluoroethylene (Refrigerated Gas R1132a) G
4 1,2-Dichloro-l, 1,2,2-Tetrafluoroethane (Refrigerated Gas R114) G
5 1,1,1,2-Tetrafluoroethane (Refrigerant Gas R134a) G
6 1,1,1-Trifluoroethane (Refrigerant Gas R 143a) G
7 1,1,-Trichloroethane T
8 1,1-Dichloro-l-Nitroethane T
9 1,1-Dichloroethane F
10 1,1-Dif luoroethane G
11 1,1 -Dimethoxyethane F
12 1,2,3,6-Tetrahydrobenzaldehyde F
13 1,2,3,6-Tetrahydropyridine F
14 1,2-Butylene Oxide, Stabilized F
15 l,2-Di-(Dimethylamino) Ethane F
16 1,2~Dibromobutan 3-one T
17 1,2-Dichloroethylene F
18 1,2-Dichloropropane F
19 1,2-Dimethoxyethane F
20 1,2-Epoxy-3-Ethoxypropane F
21 1,2-Propylenediamine c
22 1,3,5-Trimethylbenzene F
23 1,3-Dichloroacetone T
24 1,3-Dichloropropanol-2 T
25 1,3-Dimethylbutylamine F
26 1,4-Butynediol T
27 1,5,9-Cyclododecatriene T
28 1 -Bromo-3-chloropropane T
29 1 -Bromo-3-Methylbutane F
30 1-Chloro-l, 1-Dif luoroethane (Refrigerant Gas R 142b) G
31 l-Chloro-2,2,2-Trifluoroethane (Refrigerant Gas R 133a) G
167
32 1 -Ethylpiperidine F
33 1 -Methoxy-2-Propanol F
34 1-Pentol C
35 2-(2-Aminoethoxy) Ethanol C
36 2,2-Dimethylpropane G
37 2,4-Toluylenediamine T
38 2,2'-Dichlorodiethyl Ether 1
39 2,3 Dihydropyran F
40 2,3-Dimethylbutane F
41 2-Amino-4,6-Dintrophenol Wetted F
42 2-Amino-4-Chlorophenol T
43 2-Amino-5-Diethylaminopentane T
44 2-Bromo-2-Nitropropane-l, 3-Diol F
45 2-Bromoethyl Ethyl Ether F
46 2-Bromopentane F
47 2-Chloroethanal T
48 2-Chloropropane F
49 2-Chloropropene F
50 2-Chloropropionic Acid, Solid T
51 2-Chloropropionic Acid, Solution c
52 2-Chloropyridine T
53 2-Diethylaminoethanol c
54 2-Dimethylaminoacetonitrile F
55 2-Dimethylaminoethanol c
56 2-Dimethylaminoethyl Acrylate T
57 2-Dimethylaminoethyl Methacrylate T
58 2-Ethylaniline T
59 2-Ethylbutanol F
60 2-Ethylbutyraldehyde F
61 2-Ethylhexyl Chloroformate T
62 2-Ethylhexylamine F
63 2-Iodobutane F
64 2-Methyl-l-Butene F
65 2-Methyl-2Butene F
66 2-Methyl-2-ITeptanethios T
67 2-Methyl-5-Ethylpyridine T
68 2-Methylfuran F
69 2-Methylpentan-2-OL F
70 2-Trifluoromethylaniline T
71 3,3-Diethoxypropene F
168
72 3,3'-Iminodipropylaminc C
73 3-Bromopropyne F
74 3-Chloro-4-Methylphenyl Isocyanate T
75 3-Chloropropanol-l 1
76 3-Methyl-l-Butene F
77 3-Methylbutan-2-One F
78 3-Nitro-4-Chlorobenzotrifluoride C
79 3-Trifluoromethylanilinc T
80 4 Methoxy-4-Methylpentan 2-one F
81 4,4'-Diaminodiphenylmethane T
82 4-Chloro-o-Toluidine Hydrochloride T
83 4-Methylmorpholine(N-Methylmorpholine) F
84 4-Thiapcntanal T
85 5-Viethy lhexan-2-one F
86 5-Nitrobenzotriazol E
87 5-tert-Butyl-2, 4,6-Trinitro-m-Xylene F
88 9-Phosphabicyclononanes (Cyclooctadiene Phosphines F
89 Acetaldehyde F T
90 Acetaldehyde Ammonia T
91 Acetic Acid c
92 Acetic Acid Solution c
93 Acetic Acid, Glacial or Acetic Acid Solution c
94 Acetic Anhydride C
95 Acetic Cyanothydrin T
96 Acetone F
97 Acetone Cyanohydrin T
98 Acetone Cyanohydrine (2-Cyanopropan-2-OL) T
99 Acetone Oils r
100 Acetone Thiosemicarbazide T
101 Acetonitrile F T
102 Acetyl Bromide c
103 Acetyl Chloride F T
104 Acetyl Iodide c
105 Acetyl Methyl Carbinol F
106 Acetylene T G
107 Acetylene (Ethyne) F
108 Acetylene Tetra Chloride T
169
109 Acridine T
110 Acrolein (2-Propenal) F T
111 Acrolein Dimer, Stabilized F
112 Acrylamide 1
113 Acrylic Acid, Stabilized c:
114 Acrylonitrile F 1
115 Adiponitrile 1
116 Aerosols G
117 Aircraft 1 lydraylic Power Unit Fuel Tank F
118 Alcoholates Solution, N.O.S. F
119 Alcoholic Beverages F
120 Alcohols, Flammable, Toxic, N.O.S. F
121 Alcohols, N.O.S. F
122 Aldehydes, Flammable, Toxic, N.O.S. F
123 Aldehydes, N.O.S. F
124 Aldicarb I
125 Aldol T
126 Alkali Metal Alloy, Liquid, N.O.S. F
127 Alkali Metal Amalgam F
128 Alkali Metal Amide F
129 Alkali Metal Dispersion or Alkaline Earth Metal Dispersion F
130 Alkaline Earth Metal Alcoholates, N.O.S. F
131 Alkaline Earth Metal Amalgam F
132 Alkaline Metal Alcoholates, Self-Heating, Corrosive, N.O.S. F
133 Alkaloids, Liquid, N.O.S. or Alkaloid Salts, Liquid, N.O.S. T
134 AlkylPhthalate c
135 Alkylphenols, Liquid, N.O.S. c
136 Alkylphenols, Solid, N.O.S. c
137 Alkylsulphuric Acids c
138 Alkysulphonic Acids, Liquid Arkysulphonic Acids, Liquid c
139 Alkylsulphonic Acids, Liquid or Arylsulphonic Acids, Liquid c
140 Alkysulphonic Acids,Solid or Arylsulphonic Acids, Solid c
141 Allyl Alcohol F T
142 Allyl Alcohol (2-Propen-l-OL) F T
143 Allyl Amine 1
144 Allyl Bromide F T
145 Allyl Chloride F 1
146 Allyl Chloroformate T
147 Allyl Glyddyl Ether F
148 Allyl Iodide F
149 Allylamine T
150 Allyltrichlorosilane, Stabilized C
151 Alpha Naphthyi Thiourea c
170
152 Alpha-Methylbenzyl Alcohol T
153 A1pha-Methyl val eraldehyde F
154 Al pha-Naphthylamine T
155 Alpha-Pinene F
156 Aluminium (Powder) T
157 Aluminium Alkyl Haldies, Liquid/Solid F
158 Aluminium Alkyl Hydrides F
159 Aluminium Alkyls F
160 Aluminium Azide F T
161 Aluminium Borohydride F T
162 Aluminium Bromide Solution C
163 Aluminium Bromide, Anhydrous c
164 Aluminium Carbide F T
165 Aluminium Chloride c
166 Aluminium Chloride Solution c
167 Aluminium Chloride, Anhydrous c
168 Aluminium Fluoride c
169 Aluminium Hydride F
170 Aluminium Nitrate O
171 Aluminium Phosphide F
172 Aluminium Phosphide Pesticide T
173 Aluminium Resinate F
174 Aluminium Smelting By-Products or Aluminium Remelting By-
Products
F
175 Amines, Flammable, Corrosive, Flammable M.O.S. Polyaines,
Liquid, Corrosive, Flammable, N.O.S.
c
176 Amines, Flammable, Corrosive, N.O.S. or Polyaines, Flammable,
Corrosive, N.O.S.
F
177 Amines, Liquid, Corrosive, N.O.S. or Polyaines, Flammable, Liquid,
Corrosive, N.O.S.
c
178 Amines, Solid, Corrosive, N.O.S. or Polyamines, Solid, Corrosive,
N.O.S.
c
179 Amino Diphenyl T
220 Amyl Nitrate F
221 Amylamine F
222 Amyltrichlorosilane C
223 Anabasine T
224 Aniline T
225 Aniline 2,4,6-Trimethyl T
226 Aniline Hydrochloride T
227 Anisidine-P T
228 Anisidines T
229 Anisole F
230 Anisoyl Chloride c
231 Anthraquinone T
171
232 Anthrawuinone T
233 Antimony and Compounds c T
234 Antimony Hydride (Stibine) F T
235 Arasenous Trichloride T
236 Argon, Refrigerated Liquid G
237 Arsenic and All Arsenic Compounds in any Form T
238 Arsenic Hydide (Arsene) T
239 Arsenic Pentoxide, Arsenic (V) Acid and Salts T
240 Arsenic Trioxide, Arsenious (III) Acids and Salts T
241 Asbestos T
242 Aviation Regulated Liquid, N.O.S./ Solids, N.O.S. E F
243 Azinphos-Ethyl T
244 Azinphos Methyl T
245 Azoidic Arbonamide F
246 Barium Azide E
247 Barium Br ornate O
248 Barium Chlorate O
249 Barium Cyanide T
250 Barium Hypochlorite O
251 Barium Nitrate c
252 Barium Nitride C
253 Barium Oxide T
254 Barium Perchlorate O
255 Barium Permanganate 0
256 Barium Peroxide Q
257 Batteries Fluid, Alkali c
258 Batteries Wet, Filled with Acid C
259 Batteries Wet, Filled with Alkali C
260 Batteries Wet, Non-Spillable c
261 Batteries, containing Sodium, or Cells, containing Sodium F
262 Batteries, Dry, containing Potassium Hydroxide Solid c
263 Benxoyl Peroxide 0
264 Benzal Chloride U
265 Benzaldehyde U
266 Benzenamine, 3-Trifluoromethyl c —
267 Benzene h 1
268 Benzene Arsenic Acid 1
269 Benzene Chloride 1
270 Benzene Sulfonyl Chloride ]
271 Benzene, l-(Chloromethyl)-4 Nitro 1
272 Benzene, l-(Chloromethyl) 4-Nitro 1 —
172
273 Benzenesul phony 1 Chloride P (
274 Benzidine i
275 Benzidine Salts 1
276 Benzimidazole, 4,5-Dichloro-2 (Trifluoromethyl) i -
—
277 Benzonitrile 1
278 Benzoquinone 1
279 Benzoquinone-P T
280 Benzotrichloride c
281 Benzoyl Chloride c
282 Benzoyl Peroxide E T
283 Benzyl Bromide i
284 Benzyl Chloride T
285 Benzyl Chloroformate c
286 Benzyl Cyanide 1
287 Benzyl Iodide 1
288 Benzyl dimethylamine (
289 Benzylidene Chloride 1
290 Beryllium (Powder) T
291 Beryllium (Powders, Compounds) T
292 Beryllium Compound, N.O.S. T
293 Beryllium Nitrate 0
294 Beryllium Powder T
295 Bibyridilium Pesticide Solid, Toxic I
296 Bibyridilium Pesticide, Liquid, Flammable, Toxic F
297 Bicyclo (2,2,1) Heptane-2-Carbonitrile T
298 Bicylco (2.2.1) Hepta-2,5-Diene, Stabilized (2,5-Norbornadiene,
Stabilized)
F
299 Biphenyl T
300 Bipyridilium Pesticide, Liquid, Toxic T
301 Bipyridilium Pesticide, Liquid, Toxic, Flammable T
302 BIS (2,4,6-Trimitrophenylamine) C
303 BIS (2,4,6-Trinitrophenyl) Amine E T
304 BIS (2-Chloromethyl) Sulphide T
173
305 BIS (2-Chloromethyl) Ketone T
306 BIS (Chloromethyl) Ether r
307 BIS (Chloromethyl) Ketone T
308 BIS (Terbutylperoxy) Butane F T
309 BIS (Tert-Butyl Peroxy) Cyclohexane C T
310 BIS (Tert-Butylperoxy Butane, -2,2) c \
311 BIS (Tert-Butylperoxy) Cyclohexane, 1,1 c T
312 BIS (Tert-Butylperoxy) Cyclohexane-1,1
313 BIS (Tert-Butylperoxy, Butane, 2, -2) R
314 BIS, l,2Tribromophenoxy-Ethane T
315 Bismuth & Compounds Ra T
316 Bisphenol T
317 Bisulphates, Aqueous Solution c
318 Bisulphites, Aqueous Solution, N.O.S. c
319 Bi toseanate O
320 Blue Asbestos or Brown Asbestos T
321 Bombs, Smoke, Non-Explosive c
322 Boron and Compounds T
323 Boron Powder T
324 Boron Tribyomide c
325 Boron Trichloride
326 Boron Trifluoride T
174
327 Boron Trifluoride Acetic Acid Complex c
328 Boron Trifluoride Comp. with Methyl-Ether 1.1 r
329 Boron Trifluoride Diethyl Etherate c
330 Boron Trifluoride Dihydrate c
331 Boron Trifluoride Dimethyl Etherate F
332 Boron Trifluoride Propionic Acid Complex c
333 Boron Trifluoride, Compressed
412 Calcium Permanganate O
413 Calcium Peroxide O
414 Calcium Resinate b
415 Calcium Silicide F
416 Calcium, Pyrophoric or Calcium Alloys, Pyrophonc F
417 Camphor b
418 Camphor Oil b
419 Caprioc Acid c
420 Carbamate Pesticide, Liquid, Toxic 1
421 Carbamate Pesticide, Liquid, Toxic b
422 Carbamate Pesticide, Liquid, Toxic, Flammable T
423 Carbamate Pesticide, Solid, Toxic T
424 Carbaryl (Sevin) 1
425 Carbofuran T
426 Carbofuran (Furadan) T
427 Carbon Dioxide Refrigerated Liquid c;
428 Carbon Disulphide F T
429 Carbon Monoxide F T
430 Carbon Monoxide and Hydrogen Mixture, Compressed T G
431 Carbon Tetrabromide T
432 Carbon Tetrachloride T
433 Carbon, Activated F
434 Carbonyl Fluoride, Compressed G
435 Carbonyl Sulphide T
436 Carbophenothion T
437 Cartridges E
438 Caustic Alkali Liquid, N.O.S. c
439 Cehulose Nitrate E F
440 Celluloid F
175
441 Celluloid, Scrap F
442 Cellulose Nitrate E F
443 Cerium F
444 Chemical Sample, Toxic T
445 Chloral, Anhydrous, Stabilized T
446 Chlorates (Used in Explosives) E
447 Chlorates, Inorganic, Aqueous Solution, N.O.S. O
448 Chlorfenvinphos T
449 Chloric Acid, Aqueous O
450 Chlorinated Benzenes T
491 Chloroethyl Chloroformate T
492 Chlorofehvinphos T
493 Chloroflurocarbons T
494 Chlorophorm T
495 Chloroformates.Toxic,Corrosive,N.O.S T
496 Chloroformyl Morploline T
497 Chloroformyl -4 Morpholine T
498 Chloromethane T
499 Chloromethyle Chloroformate T
500 Chloromethyle Ether T
501
Chloromethyle Ethyle Ether T
502 Chloromethyle Methyle ether F
503 Chloromormates, Toxic,
Corrosive,Flammable, N.O.S
T
504 Chloronitroanilines T
505 Chloronitrobeenzene E T
506 Chloronitrobeenzene T
507 Chloronitrotoluenes, Liquid/Solid T
176
508 Chloropentafluroethane G
509 Chlorophacinone T
510 Chlorophenolates Liquid or Phenolates,liquid C
511 Chlorophenolates ,Solid or Phenolates,Solid C
512 Chlorophenols,Liquid T
513 Chlorophenyltrichloro-Silane C
514 Chloropicrin T
515 Chloropicrin Mixture, N.O.S
516 Chloroplatinic Acid, Solid C
517 Chloroprene F T
518 Chloroprene, satabilized F
519 Chlorosilanes, Corrosive,Flammable, N.O.S
520 Chlorosilanes, Corrosive, N.O.S
521 Chlorosilanes, Corrosive,Flammable, N.O.S F
522 Chlorosulphonic Acid C
523 ChloroCthipos T
524 Chlorotolunes F
525 Chlorotoluidines T
526 Chlorotrifluromethane
527 Chlorotrifluoromethane and Trifluromethane G
528 Cholorotrintro
529 Chloroxuron T
530 Chlorphenols,Solid T
531 Chloroethyle Chloroformate T
532 Chromic Acid O C T
177
533 Chromic acid Solution C
534 Chromic Chloride O C T
535 Chromic Fluoride , Solution C
536 Chromic Fluoride solid C
537 Chromium and Compounds T
538 Chromium Nitrate O
539 Chromium Oxychloride C
540 Chromium Powder T
541 Chromium Trioxide, Anhydrous O
542 Chromosulphuric acid C
543 Clinical waste ,Unspecified,N.O.S or (bio)
Medical Waste N.O.S.or regulated Medical
waste ,N.O.S
T
544 Chlorine T
545 Coal Tar Distillates, Flammable F
546 Cobalt and Compounds T
547 Cobalt (powder) T
548 Cobalt Carbonyl T
549 Cobalt Napthenates,Powder F
550 Cobalt Nitrilmathylidyne Compound T
551 Cobalt resinate ,Preciitated F
552 Coloured fire E
553 Compressed Gas, Flammable,N.O.S. G
554 Compressed Gas, Flammable, Corrosive
N.O.S.
F C T
555 Copper acetoarsenite T
556 Copper and compounds T
178
557 Copper Arsenite T
558 Copper Based pesticide, Liqiud, Flammable
toxic
F
559 Copper Based pesticle,Liquid, toxic, T
560 Copper based pesticide , Solid toxic
Flammable
T
561 Copper Based pesticle, SolidLiquid, toxic, T
562 Copper chlorate O
563 Coppe Chlorate C
564 Copper cynide Copperoxychloride T
565 Coroformyl,-4 Niorpholine T
565 Corrosive Liquid, Acidic,Inorganic, N.O.S C
566 Corrosive Liquid, Acidic,, N.O.S inorganic C
567 Corrosive Liquid, Acidic,Organic, N.O.S C
568 Corrosive Liquid, basic Inorganic, N.O.S C
569 Corrosive Liquid, Acidic,Organic, N.O.S C
570 Corrosive Liquid, Flammable, N.O.S C
571 Corrosive Liquid, oxidizing, N.O.S C
572 Corrosive Liquid, Self-Heating N.O.S C
573 Corrosive Liquid, Toxic N.O.S C
574 Corrosive Liquid, Water-Reactive N.O.S C
575 Corrosive solid, Acidic Liquid, Inorganic
N.O.S
C
576 Corrosive Solid Acidic Organic N.O.S C
577 Corrosive solid, Basic,Inorganic,N.O.S C
578 Corrosive Solild, Basic,Organic, N.O.S C
579 Corrosive Solid,Oxidizing N.O.S C
179
580 Corrosive Solid,Toxic N.O.S C
581 Corrosive Solid, Water-Reactive, N.O.S C
582 Coumarin Derivative Pesticle, liquid, Toxic F
583 Coumarin Derivative liquid, Toxic T
584 Coumarin Derivative Pesticle, liquid, Toxic,
Flammable
T
585 Coumarin Derivative Pesticle, Solid,toxic T
586 Coumatertralyl T
587 Cresols T
588 Cresols,Liquid/Liquid T
589 Cresylic Acid T
590 Crimidine T
591 Crotonaldehyde F T
592 Crotonic Acid C
593 Cumene T
594 Cupriethylenediamine Solution C
595 Cynide Solution, N.O.S. T
596 Cynides, Inorganic,Solid, N.O.S. T
597 Cyanogen G
598 Cyanogen Bromide T
599 Cyanogen chloride ,Stabilized T G
600 Cyanogen Iodide T
601 Cyanothoate T
602 Cynuric Chloride C
603 Cyanuric Fluoride
604 Cyclobutane G
180
605 Cyclobutyl Choroformate T
606 Cycloheptane F
607 Cucloheptane F
608 Cyclohatatriene F
609 Cyclohexane F
610 Cyclohexanone F
611 Cyclohexane F
612 Cyclohexenyltrichlorosilane C
613 Cycloheximide T
614 Cyclohexyl Acetate F
615 Cyclohexyl Isocyanate T
616 Cyclohexyl Mercaptan F
617 Cyclohexylamine C
618 Cyclohexytrichlorosilane C
619 Cycloctdienes F
620 Cyclooctetraene F
621 Cyclopentadiene F
622 Cyclopentane F
623 Cyclopentol F
624 Cyclopentanone F
625 Cyclopentene F
626 Cyclopropane G
627 Cycloptetrametylene tetranitramine E
628 Cyclotetrametylene tatranitramine(Hmx,
Octogen),Wetted
E
629 Cyclotetrametylene tatranitramine and
Cylotetramethylenetetranitramine Mixure
E
181
wettd or Cyclotrimethyle
630 Cymes F
631 DDT T
632 Decaborane T
633 Decaboreneo F
634 Decabromodiphenyl Oxide T
635 Decahydeonaphthalene F
636 Deglagrating Metal Salts Of Aromaitc
Nirtroderivatives,N.O.S
E
637 Demeton T
638 Dementon S-Methyle T
639 Detonators E
640 Deuterium, Compressed G
641 Device, small hydrocarbon Gas Powered or
Hydrocarbon Gas refills For small Devices
G
642 Dhsobutylamine F
643 Diacetone Alcohol F
644 Dialifos T
645 Dially Ether F
646 Dialylamine F
647 Diazodinitrophenol E
648 Diazodinitrophenol, Wetted E F
649 Diazomethane T
650 Dibengyle Peroxydiacarbonate R
651 Dibengyle Peroxydiacarbonate(Conc>=90% T
182
652 Dibenzyledichlorosilane C
653 Diaborane T
654 Diaborane, Compressed G
655 Dibromochloropropanes T
656 Dibromodifluoromethane T
656 Dibromodifluoromethane T
657 Dibromomethane T
658 Dibutyle Ethers F
659 Dibutylminoethanol T
660 Dichloro Obenzene-O T
661 Dichloroacetic acid C
662 Dichloroacetyle chloride C
663 Dichloroacetylene T
664 Dichloroacetylene-O T
665 Dichloroanililnes, Liquid T
666 Dichlorobenzenezalkonium Chloride T
667 Dichlorobenzene-p T
668 Dichlorodifluromethane G
669 Dichlorodifluoromethane and difluroethane
Azetopic Mixture
G
670 Dichloromethyl Ether, Symmetrical T
671 Dichloroethane T
672 Dichloroethayl Ether T
673 Dichlororisocyanuric Acid ,Dry or
Dichloisocyanuric Acis Salts
O
674 Dichloroisoprpyl Ether T
183
675 Dichloromethane T
676 Dichloromethyle Phenysilane T
677 Dichloropentanes F
678 Dichlorophenol,-2,4 & -2,6 T
679 Dichlorophenoxy Acetic Acid T
680 Dichlorophenixy Acetic Acid -2, 4(2,4-D) T
681 Dichlorophenyl Isocynates T
682 Dichlorophenyl Trichlorosilane C
683 Dichloropropane 2,2 T
684 Dichloropropane -1,2 T
685 Dichloropropenes F
686 Dichlorosalicylic Acid, -3,5 T
687 Dichlorosalicylic Acid-3,5 T
688 Dichlorosilane G
689 Dichlorvos(DDVP) T
690 Dicrotophos T
691 Dicyclohexlamine C T
692 Dicyclohexylammonium Nitrite F
693 Diclypentadiene F
694 Didymium Nitrate O
695 Diepoxy Butane T
696 Diepoxybutane T
697 Deithleneglycol Butyl Ether T
698 Dithoxy Methane F
699 Diethye Peroxidicarbonate R
184
700 Diethyl carbamazaine Citrate R
701 Diethyl Carbamazine Citrate R
702 Diethyl Carbonate F
703 Diethyl Chlorophosphate T
704 Diethyl Ethanolamine T
705 Diethyl ether (Ethyle Ether) F
706 Diethyl Glycol Dinitrate T
707 Diethyl ketone F
708 Diethyl peroxydicarbonate (Coc=30%) T
709 Diethyl peroxydicarbonate(Coc=30%) T
710 Diethyl Phenylene diamine T
711 Diethyle sulphate T
712 Diethyle sulphide F
713 Diethylamine R
714 Diethylamine Ehanol T
715 Diethylaminopropylamine F
716 Diethylbenzene F
717 Diethydichlorosilane C
718 Diethylene Glycol T
719 Diethylene Glycol Butyl Ether T
720 Diethylene Glycol Dinitrate T
721 Diethylene Triamine T
722 Diethyleneglycol Butyl Ether/
Diethyleneglycol Butyl Acetate
T
723 Diethyleneleneglycol, Dintrate, Desensitized E C
724 Diethylenetriamine C
185
725 Diethylenetriamine ( Deta) C
726 Diethylthiophosphoryl Chloride C
727 Difluoromethane (Refrigerant Gas R 32) G
728 Difluorophosphoric Acid ,Anhydrous C
729 Digitoxin C
730 Diglycidyl Ether T
731 Dihlorofluoromethane G
732 Dihydroperoxypropane (Conc>= 30%) T
733 Dihydrpperoxypropane , -2,2 E
734 Diisobutyl Ketone F
735 Diisobutyle Peroxide R
736 Di-Isobutyl Peroxide T
737 Diisobutylene, Isomeric Compounds F
738 Di-Isobutyryl Peroxide T
739 Diisooctyl Acid Phosphate C
740 Diisopropyl Ether F
741 Diisopropyl amine R
742 Dikketene,Stabilized T
743 Dimefox F C
744 Dimethacaebonyl Chloride T
745 Dimethacarbonyl Chloride T
746 Dmeythoate T
747 Dimethyl Carbonate F T
748 Dimethyl Dichlorosilane T
749 Dimethyl Disulphide F
186
750 Dimethyl Ether G
751 Dimethyl Hydrazine C
752 Dimethyl Nitrosoamine C
753 Dimethyl P Phenylene Diamine T
754 Dimethyl Phosphoramidi Cynidic Acid
(Tabum)
T
755 Dimethyl Phosphoramidocyanidic acid T
756 Dimethyl Phosphorochloridothiate T
757 Dimethyl Phthalate T
758 Dimethyl Sulfolane(Dms) T
759 Dimethyl Sulphate T
760 Dimethyl Sulphide F
761 Dimethyl Thiophosphoryl Chloride T
762 Dimethylamine T
763 Dimethyllamine Aqueous Solution F
764 Dimethylamine Anhydrous T
765 Dimethylaniline T
766 Dimethylcarbamoyl Chloride C T
767 Dimethylcarbamoyl T
768 Dimethylcarbonyl Chloride T
769 Dimethylcyclohexanenanes F
770 Dimethylcylcohaxylamine C
771 Dimethyldichlorosilane F
772 Dimethyldiethoxysilane F
773 Dimethyldioxanes F
774 Dimethylformamide T
187
775 Dimethylhydrazine, Symmetrical T
776 Dimethylhydrazine, Unsymmetrical T
777 Dimethylnitrosamine T
778 Dimethyl-N-propylamine F
779 Dimetilan T
780 Di-N-Amylamine F
781 Di-N-Butylamine C
782 Dinitrto-O-Cresol T
783 Dinitrobenzene T
784 Dinitrobenzene, Liquid T
785 Dinitrobenzene, Solid T
786 Dinitrogen Tetroxide (Nitrogen Dioxide) G
787 Dinitro-O-Cresol T
788 Dinitrophenol E O C
789 Dinitrophenol Solution T
790 Dinitrophenol, Salts E T
791 Dinitrophenol, Wetted f
792 Dinitrophenol, Wetted F
793 Dinitroresorcinol E
794 Dinitroresorcinol, Wetted F
795 Dinitrosobenzene E
796 Dinitrotoluene T
797 Dinitrotoluene, Liqiud/Solid T
798 Dinitrotoluene,Molten E T
799 Di-N-Propyl Ether F
188
800 Di-N-Propyl Ether Peroxidicarbonates R
801 Di-N-Propyl Ether
Peroxidicarbonates(Conc=80%)
R
802 Dioxane F T
803 Dioxane-P T
804 Dioxathion T
805 Dioxine-N T
806 Dioxolane F
807 Dipentene F
808 Diphacinone T
809 Diphenyl Mathane di-Isocynate(Mdi) T
810 Diphenyl amine Chloroarsine T
811 Diphenyl chloroarsine, Liquid/Solid T
812 Diphenyl dichlorosilane C
813 Diphenyl methyl Bromide C
814 Diphophoramide Octamrthyl T
815 Dipicryl Sulphide E
816 Dipicryl Sulphide ,Wetted F
817 Dipropyl Ketone F
818 Dipropylamine F
819 Dipropylene Glycol Butyl Ether F
820 Dipropyl ene Glycolmethylether F
821 Dichlorophenoxy Acetic Acid F
822 Discrotophos F
823 Di-Sec-Butyl Peroxidicarbonate R
824 Di-Sec-Butyl Peroxidicarbonate (Conc>80%) R T
189
825 Disinfectant, Liqiud ,Corrosive N.O.S. C
826 Disinfectant Liqiud, N.O.S., Toxic T
827 Disinfectant, Solid, N.O.S., Toxic T
828 Disobutyl Peroxide T
829 Disodium Trioxosilcate C
830 Disulfoton T
831 Dithiazamine Iodide T
832 Dithiobiurate T
833 Dithydroperoxypropane,-2,2 T
834 Divinyl Ether , Satbilized T
835 Dodecyltrichlorosilane C
836 Dry, Liquid, Corrosive, N.O.S. or Dye
Intermediate, Liquid, Corrosive, N.O.S.
C
837 Dye, Solid, Corrosive, N.O.S. or Dye
Intermediate, Solid, Corrosive, N.O.S.
C
838 Dye, Solid, Toxic, N.O.S. or Dye Intermediate,
Solid, Toxic, N.O.S.
T
839 Ear gas Substance, Liquid/Solid, N.O.S. T
840 Elevated Temperature Liquid, Flammable F
841 Epibromohydrin T
842 Epichlorohydrin F T
843 Epn T
844 Epoxypropane, 1,2 T
845 Ergocalciferol T
846 Ergotamine Tartarate T
847 Esters, N.O.S. F
848 Ethane G
849 Ethane, Refrigerated Lliquid G
850 Ethanesulfenyl Chloride, 2, Chloro G
851 Ethanol 1-2 Dichloracetate T
852 Ethanol or Ethanol Solution F
853 Ethanolamine or Ethanolamine Solution C
854 Ethers, N.O.S. F
855 Ethion T
856 Ethoprophos T
857 Ethyl 2-Chloropropionate F
858 Ethyl Acetate F
859 Ethyl Acrylate, Stabilized F
860 Ethyl Alcohol F
190
861 Ethyl Amine T G
862 Ethyl Amyl ketone F
863 Ethyl Benzene T G
864 Ethyl Bis Amine T G
865 Ethyl Borate F
866 Ethyl Bromide T
867 Ethyl Bromoacetate T
868 Ethyl Butyl Ether F
869 Ethyl Butyrate F
870 Ethyl Carbamate T
871 Ethyl Chloride G
872 Ethyl Chloroacetate T
873 Ethyl Chloroformate T
874 Ethyl Chlorothioformate C
875 Ethyl Crotonate F
876 Ethyl Ether F
877 Ethyl Fluoride (Refrigerant Gas R 161) G
878 Ethyl Isobutyrate F R T
879 Ethyl Isocyanate F
880 Ethyl Lactate F
881 Ethl Mercaptan F T
882 Ethyl Mercuric Phosphate T
883 Ethyl Methacrylate F
884 Ethyl Methyl Ether G
885 Ethyl Methyl Ketone (Methyl Ethyl Ketone) F
886 Ethyl Nitrate E R T
887 Ethyl Orthoformate F
888 Ethyl Oxalate T
889 Ethyl Propionate F
890 Ethyl Propyl Ether F
891 Ethyl Thiocyanate T
892 Ethylacetylene, Stabilized G
893 Ethylamine G
894 Ethylamine, Aqueous Solution F
895 Ethylbenzene F
896 Ethyldichloroarsine T
897 Ethyldichlorosilane F
898 Ethylene G
899 Ethylene Chlorohydrin T
900 Ethylene Chlorohydrine T
901 Ethylene Dl-Chloride T
902 Ethylene Diamine F C
903 Ethylene Diamine Hydrochloride T
904 Ethylene Dibromide T
905 Ethylene Dibromide(1,2-Dibromomethane) T
906 Ethylene Flourohydrine F
907 Ethylene Flourohydrine T
908 Ethylene Glycol T
909 Ethylene Glycol Dinitrate E T
191
910 Ethylene Glycol Monoethyl Ether F
911 Ethylene Glycol Monoethyl Ether Acetate F
912 Ethylene Glycol Monomethyl Ether F
913 Ethylene Glyol Diethyl Ether F
914 Ethylene Oxide E R T
915 Ethylene Oxide and Carbon Dioxide Mixture G
916 Ethylene Oxide and Carbon Dioxide Mixture G
917 Ethylene Oxide and Chlorotetrafluoroethane
Mixture
G
918 Ethylene Oxide and Dichlorodifluoromethane
Mixture
G
919 Ethylene Oxide and Pentrafluoroethane
Mixture
G
920 Ethylene Oxide and Propylene Oxide Mixture F
921 Ethylene Oxide and Tetrafluoroethane Mixture G
922 Ethylene Oxide or Tehylene Oxide With
Nitrogen
G
923 Ethylene, Acetylene and Propylene Mixture,
Refrigerated Liquid
G
924 Ethylene, Compressed G
925 Ethylene, Refrigerated Liquid G
926 Ethyleneamine F
927 Ethylenediamine C
928 Ethylphenyldichlorosilane C
929 Ethylthiocyanate T
930 Ethyltrichlorosilane F
931 Explosive, Blasting Type E E
932 Explosive, Blasting, Type A E O
933 Explosive, Blasting, Type B E C Ra
934 Ferric Arsenate T
935 Ferric Arsenite T
936 Ferric Chloride Solution C
937 Ferric Chloride, Anhydrous
938 Ferric Nitrate O
939 Ferrous Arsenate T
940 Ferrous Metal Borings, Shavings, Turnings or
Cuttings
F
941 Fire Extinguisher Charges R T
942 Firelighters, Solid F
943 Fireworks E
944 Flammable Liquid Corrosive, N.O.S. F
945 Flammable Liquid, Corrosive, Organic, N.O.S. T
946 Flammable Liquid, Toxic, Corrosive, N.O.S. F
947 Flammable Solid, Corrosive, Inorganic, N.O.S. F
948 Flammable Solid, Corrosive, Organic, N.O.S. F
949 Flammable Solid, Organic, N.O.S. F
950 Flammable Solid, Organic, N.O.S. F
951 Flammable Solid, Oxidizing, N.O.S. F
952 Flammable Solid, Toxic, Inorganic, N.O.S. F
192
953 Flammable Solid, Toxic, Inorganic, N.O.S. F
954 Fluenetil T
955 Fluoride T
956 Fluorine T
957 Fluorine, Compressed G
958 Fluoro 2-Hydroxy Butyric Acid Amid Salt
Ester
T
959 Fluoro,-4,-2-Hydroxybutyric Acid & Salts
Esters, Amides
T
960 Fluoroacetic Acid T
961 Fluoroanilines T
962 Fluorobenzene F
963 Fluoroboric Acid C
964 Fluorocobutyric Acid & Salts, Esters Amides T
965 Flurophosphoric Acid, Anhydrous C
966 Fluorosilic Acid C
967 Fluorosilicates, N.O.S. T
968 Fluorosulphonic Acid C
969 Fluorotoluenes F
970 Fluroacetic Acide and Salts Esters and Amides T
971 Flurobutyric Acid, -4 and Salts, Esters and
Amides
T
972 Flurocrotonic Acid, -4 and Salts, Esters and
Amides
T
973 Fog-Signals E
974 Formaldehyde T
975 Formaldehyde Solution C
976 Formaledehyde Solution, Flammbile F
977 Formatenate Hydrochloride T
978 Fuel, Aviation, Turbine Engine F
979 Fumaryl Chloride C
980 Furaldehydes T
981 Furan F
982 Furfural T
983 Furfuryl Alcohol T
984 Furfurylamine F
985 FueseL Oil
986 Fuses E
987 Gallium C
988 Gallium Trichloride T
989 Gas Oil or Disel Fuel Or Heating Oil Light F
990 Gas,Refrigerated Liquid,Flammable,N.O.S G
991 Gas,Refrigerated Liquid, ,N.O.S G
992 Gas,Refrigerated Liquid,Oxidizing,,N.O.S G
993 Glycerol Alpha-Monochlorohydrin T
994 Glycidaldehyde F
995 Glyconitrile (Hydroxyacetonitrile) T
996 Guanidine Nitrate O
997 Guanyl Nitrosaminoguanylidene
193
Hydrazine,wetted
998 Guanyl Nitrosaminoguanylidene (
Tetrazene),wetted
E
999 Guanyl1,-1,-4 Nitrosaminogunyl-1 Tetrazene E `
`
1000 Gun-Cottan E
1001 Gunpowder E
1002 Hafnium Power,Dry F
1003 Helium,Refrigerated Liquid G
1004 Heptachlor T
1005 Heptafiuororopane 9 Refrigerant Gas R 227) G
1006 Heptanes F
1007 Hexa Methyl Terta-oxyacyclononate (conc
75%)
T
1008 Hexabutrodiphenylamine E
1009 Hexachloro Cyclopentadiene T
1010 Hexachloroacetone T
1011 Hexachloroacetone T
1012 Hexachlorobutadiene T
1013 Hexachlorodibenzo-P-Dioxin-
1,2,3,7,8,9,Hexamethylphosphoramide
T
1014 Hexachlorophene T
1015 Hexadecyltrichlorosilane C
1016 Hexadiene F
1017 Hexaetthyl Tetraphosphate T
1018 Hexafluoropropylene G
1019 Hexamethyl Phosphproamide T
1020 Hexamethyl,-3,3,6,6,9,9-1,2,4,5,-
Tetroxacyclononane
R
1021 Hexamethylene Disocyanate T
1022 Hexamethylenediamine Solution T
1023 Hexamethylenediamine Solid C
1024 Hexamethylenediamine F
1025 Hexamethyletramine F
1026 Hexamethylphosphoramide T
1027 Hexanes F
1028 Hexanitrostilbene E
1029 Hexanitrostilbene-2,2,4,6,6 E
1030 Hexanols F
1031 Hexavalent Chromium T
1032 Hexene F
1033 Hexotonal E
1034 Hexylltrichlorosilane C
1035 Hydrazine F C T
1036 Hydrazine Nitrate E
1037 Hydrazine,Anhydrous C `
1038 Hydrazine,Aqueous T
1039 Hydrazine,Hydrate or Hydrazine Aqueous
Solution
T
194
1040 Hydriodic Acid C
1041 Hydrobromic Acid C
1042 Hydrocarbon Gas Mixture,Compressed,N.O.S G
1043 Hydrocarbon Gas Mixture,Liquefied,N.O.S G
1044 Hydrocarbon,Liquid,N.O.S F
1045 Hydrochloric Acid C
1046 Hydrochloric Acid (Gas) T
1047 Hydrochloric Acid,Aqueous Solution
(Hydrogen Cyanide
Aqueous Solution)
T
1048 Hydrofluoric Acid T
1049 Hydrofluoric Acid and Sulphuric Acid mixture C
1050 Hydrogen F R
1051 Hydrogen Bromide,Anhydrous G
1052 Hydrogen and Methane Mixture,Compressed G
1053 Hydrogen Bromide T
1054 Hydrogen Bromide (Hydrobromic Acid) C
1055 Hydrogen Chloride (Liquified Gas) C
1056 Hydrogen Chloride, Anhydrous G
1057 Hydrogen Chloride,refrigerated Liquid G
1058 Hydrogen Cyanide T
1059 Hydrogen Cyanide,Solution in Alcohol T
1060 Hydrogen Cyanide,Stablized T
1061 Hydrogen Fluoride C
1062 Hydrogen Fluoride, Anhydrous C
1063 Hydrogen Lodide, Hydrogen G
1064 Hydrogen Peroxide O
1065 Hydrogen Peroxide and Preroxyacetic Acid
Mixture
O
1066 Hydrogen Peroxide, Adeous Solution O
1067 Hydrogen Peroxide, Aqueous Solution O
1068 Hydrogen Peroxide, ,Stablized OR Hydrozen
Peroxide,
Adeous Solution,Stabilized
O
1069 Hydrogen Selenide T
1070 Hydrogen Selenide,Anhydrous G
1071 Hydrogen Sulphide F
1072 Hydrogen,Refrigerated Liquid C
1073 Hydrogendifluorides,N.O.S. C
1074 Hydroquinone T
1075 Hydroxylamine Sulphate C
1076 Hypochlorite Solution C
1077 Hypochlorites,Inorganic,N.O.S O
1078 Indane O `
1079 Infectious Substance,Affecting Animals T
1080 Infectious Substance,Affecting Humans T
1081 Infecticide Gas,Flammable,N.O.s T
1082 Infecticide Gas,N.O.S G
1083 Infecticide Gas,Toxic,Flammable,N.O.S G
195
1084 Infecticide Gas,Toxic,N.O.S G
1085 Iodine T
1086 Iodine Monochloride C
`
1087 Iodine Pentafluoride O
1088 Iodomethylpropanes F
1089 Iodopropanes F
1090 Iridium Tetrachloride T
1091 Iron Pentacarbonil T
1092 Isobutane T
1093 Isobutane G
1094 Isobutanol (Isobutyl Alcohal) F
1095 Isobutyl Chloride F
1096 Isobutyl Acetate F
1097 Isobutyl Acrylate,Stabilized F
1098 Isobutyl Alcohol T
1099 Isobutyl Formate F
1100 Isobutyl Isobutyrate F
1101 Isobutyl Isocyanate F
1102 Isobutyl Methacrylate,Stabilized F
1103 Isobutyl Propane F
1104 Isobutylene G
1105 Isobutyraldehyde (Isobutyl Aldehyde) F
1106 Isobutyric Acid F
1107 Isbutyro Nitrile T
1108 Isbutyro Nitrile F
1109 Isocyanates,Flammable,Toxic,N.O.S or
OIsocynate Solution,Toxic,Flammable ,N.O.S.
F
1110 Isocyanates,Toxic,N.O.S, ,Flammable N.O.S
or Isocyanate
Solution,Toxic,Flammable,N.O.S.
T
1111 Isocyanates,Toxic N.O.S or Isocynate
Solution, Toxic,N.O.S
T
1112 Isocyanatobenzotriffluorides T
1113 Isocyanic Acid 3,4-Dichlorophenyl Ester T
1114 Isodrin T
1115 Isofluorophosphate T
1116 Isoheptene F
1117 Isohexene F
1118 Isooctene F
1119 Isopentenes F
1120 Isophorone Diisocyanate T
1121 Isophorone Disocyanate T
1122 Isophoronediamine C
1123 Isopropenyl Acetate F
1124 Isopropenylbenzene F
1125 Isopropl Formate T
1126 Isopropyl 2- Chloroproopionate F
1127 Isopropyl Acetate F
196
1128 Isopropyl Acid Phosphate C
1129 Isopropyl Alcohol F
1130 Isopropyl Butyrate F
1131 Isopropyl Chloracacetate C
1132 Isopropyl Chlorocarbonate C
1133 Isopropyl Choloroformate T
1134 Isopropyl Ether F
1135 Isopropyl Isobutyrate F
1136 Isopropyl Isocyanate F
1137 Isopropyl Methyl Pyrazolyl Dimethyl
Carbonate
T
1138 Isopropyl Propionate F
1139 Isopropylamine F C
1140 Isopropylbenzene F
1141 Isoprpanle (Isoprophl Alcohol) F
1142 Isosorbide F
1143 Isosorbide-5-Mononitrate F
1144 Juglone (5-Hydroxynapthalane-1,4-Dione) T
1145 Juglone (5-Hydroxy naphthalene Dione) T
1146 Kerosene F
1147 Ketene T
1148 Ketenes,Liquid,N.O.S F
1149 Krypton,Regrigerated Liquid G
1150 Lactonitrile T
1151 Lead (Inorganic Fumes & Dusts) T
1152 Lead 2,4,6-Trinitrosorcinoxide (Lead
Styphnate)
E
1153 Lead Acetate T
1154 Lead Arsentes T
1155 Lead Arsenite T
1156 Lead Arsenites T
1157 Lead Azide T
1158 Lead Azide,Wetted E
1159 Lead Compound,Soluble,N.O.S. T
1160 Lead Cyanide T
1161 Lead Dioxide O
1162 Lead Nitrate O
1163 Lead Perchlorate O
1164 Lead Phosphite Diabasiac F
1165 Lead Styphanate (Lead trinitroresorcinate)
wetted
E
1166 Lead Sulphate C
1167 lindane T
1168 Liquefied Gas flammable.N.O.S G
1169 Liquefied Gas,,N.O.S G
1170 Liquefied Gas,Oxidizing,N.O.S G
1171 Liquefied Gas,Toxic Flammable,N.O.S G
1172 Liquefied Gas,Toxic N.O.S. G
1173 Liquefied Petrileum Gas, F
197
1174 Liquefied Gas,Toxic,Corrosive,N.o.S G
1175 Liquefied Gas,Toxic,Flammable,Corrosive
N.O.S
G
1176 Liquefied Gas,Toxic,Oxidizing, Corrosive
N.O.S
G
`
1177 Liquefied Gas,Toxic,Oxidizing,N.O.S. G
1178 Lithium F
1179 Lithium Alkyis F
1180 Lithium Aiuminium Hydride F
1181 Lithium Aiuminium Hydride,Ethereal F
1182 Lithium Borohydride F
1183 Lithium ferrosilicon F
1184 Lithium Hydride F
1185 Lithium Hydride,Fused Solid F
1186 Lithium Hydroxide Monohydrate C
1187 Lithium Hydroxide Solution C
1188 Lithium Hypochlorite,Dry or Lithium
Hypochlorite Mixture
O
1189 Lithium Nitrate O
1190 Lithium Nitrate F
1191 Lithium Peroxide O
1192 Lithium Silicon F
1193 London Purple T
1194 Magnesium Alkyls F
1195 Magnesium Aluminium Phosphide F
1196 Magnesium Arsenate T
1197 Magnesium Bromate O
1198 Magnesium Chlorate O
1199 Magnesium Diamide F
1200 Magnesium Dipheny F
1201 Magnesium Fluorosilicate T
1202 Magnesium Granules,coated F
1203 Magnesium Hydride F
1204 Magnesium Nitrate O
1205 Magnesium or Magnesium Alloys F
1206 Magnesium Perchlorate O
1207 Magnesium Peroxide O
1208 Magnesium Phosphide F
1209 Magnesium Powder or Magnesium Alloys
Powder
F
1210 Magnesium Powder or Ribbon O
1211 Magnesium Silicide F
1212 Magnesium Anhydride C
1213 Maleil Anhydride T
1214 Malononitrile T
1215 Maltel Anhydride T
1216 Managanese and Compounds T
1217 Maneb or Maneb Preparation F
1218 Maneb, Stebilized or Maneb F
198
Preparation,Stablized
1219 Mangnese Nitrate O
1220 Mangnese Resinate F
1221 Magnese Hexanitrate (Nitromanite) Wetted C
1222 Mannitol Hexanitrate (Nitromannite)Wetted E
1223 Matches,Fusee F
1224 Match,Saftey F
1225 Matches,strike any Where F
1226 Matches,Wes Vesta F
1227 Mechlor Ethamine T
1228 Medicine,Liquid,Flammable,Toxic,N.O.S. F
1229 Medicine,Liquid, ,Toxic,N.O.S. T
1230 Medicine,Liquid, ,Toxic,N.O.S. T
1231 Mephospholan T
1232 Mercaptans,Liquid,Flammable,N.O.S. of
Mercaptan Mixture,Liquid,Flammable,N.O.S.
F
1233 Mercaptans,Liquid,Flammable,Toxic,N.O.S.
or Mercaptan Mixture
F
1234 Mercaptans,Liquid,Flammable,Toxic,N.O.S.
or Mercaptan Mixture ,
Liquid,toxic,Flammable,N.O.S.
T
1235 Mercapto Benzothiazole T
1236 Mercuric Acetate T
1237 Mercuric Arsenate T
1238 Mercuric Chloride T
1239 Mercuric Nitrate T
1240 Mercuric Oxide T
1241 Mercuric Potassium Cyanide T
1242 Mercurous Nitrate T
1243 Mercury C
1244 Mercury Acetate T
1245 Mercury Alky O T
1246 Mercury Ammonium Chloride T
1247 Mercury Besed Pesticide,Liquid,Flammable
Toxic
F
1248 Mercury Based Pesticide,Liquid,Toxic T
1249 Mercury Based
Pesticide,Liquid,Toxic,Flammable
T
1250 Mercury Based Pesticide,Solid,Toxic T
1251 Mercury Benzoate T
1252 Mercury Bromodes T
1253 Mercury Compound,Liquid,N.O.S T
1254 Mercury Compound,Solid,N.O.S T
1255 Mercury Cyanide T
1256 Mercury Fulminate E
1257 Mercury Gluconate T
1258 Mercury Iodide T
1259 Mercury Methy T
1260 Mercury Methy Chloride T `
199
1261 Mercury Nucleate T
1262 Mercury Oleate T
1263 Mercury Oxide T
1264 Mercury Oxycyaniude,Desensitised T
1265 Mercury Potassium Iodide T
1266 Mercury Salicylate T
1267 Mercury sulphate T
1268 Mercury Thiocyanate T
1269 Metal Alkyl Haldies, Water Reactive,N.O.S or
Metal,Aryl Haldies,Water Reactive,N.O.S.
F
1270 Metal Alkyl Hydrides, Water Reactive,N.O.S
or
Metal,Aryl Hydrides,Water Reactive,N.O.S.
F
1271 Metal Alkyl Haldies, Water Reactive,N.O.S or
Metal,Aryl , Water Reactive,N.O.S.
F
1272 Metal carbonyls,N.O.S. T
1273 Metal Catalyst,Dry F
1274 Metal Catalyst,Wetted F
1275 Metal Hydrides,Flammable,N.O.S F
1276 Metal Hydrides,waterReactive, N.O.S. F
1277 Metal Powder Flammable,N.O.S F
1278 Metal Powder,Self Heating,N.O.S. F
1279 Metal Salts of oranic
Compounds,Flammable,M N.O.S
F
1280 Metal Dehyde F
1281 Metallic Substance,water Reactive,N.O.S F
1282 Methaacrolein Diacetate F
1283 Methacrylaldehyde,Stabilized F
1284 Methacrylic Acid,Stablized C
1285 Methacrylic Anhydride C
1286 Methacrylonitrile C
1287 Methacrylonitril, Stabilized F
1288 Methacrycol Chloride T
1289 Methacryloyl Oxyethyl Isocyanate T
1290 Methallyl Alcohol F
1291 Methaamidophos T
1292 Methane G
1293 Mathane, compressed or Natural gas
Compressed
G
1294 Methane, regrigirated Liquid or natural Gas,
refrigerated Liquid
G
1295 Methanesulphonyl chloride T
1296 Methanesulphonyl Fluoride T
1297 Methanidophos T
1298 Methanol F
1299 Methanthiol T
1300 Methidathion T
1301 Methtiocarb T
1302 Methonyl T
200
1303 Methoxy Ethanol T
1304 Methoxy Ethanol(@-Methyl Cellosolve) T
1305 Methoxyethyl Mercuric Acetate T
1306 Methoxy methyl Isocyanate F
1307 Methyarylol Chloride T
1308 Methyl 2- Chloroacrylate T
1309 Methyl 2-Chloroproplonate F
1310 Methyl Acetate F
1311 Methyl Acrylate F T
1312 Methyl Acrylate, Stabilized F
1313 Methyl alcohol F
1314 Methyl Amine F
1315 Methyl Amylketone F
1316 Methyl Bromide C
1317 Methyl Bromide( Bromomethane) G
1318 Methyl Bromide and Ethylene Dibromide
Mixture, Liquid
T
1319 Methyl Bromoacatate T
1320 Methyl Butyrate F
1321 Methyl Chloride F
1322 Methyl Chloride and Methylene Chloride
Mixture
G
1323 Methyl chloroacetate T
1324 Methyl Chloroform F T
1325 Methyl Chloroformate T
1326 Methyl Chloromethyl Ether T
1327 Methyl Cyclohexane F
1328 Methyl Cyclohexane F
1329 Methyl Dichloroacetate T
1330 Methyl Disulphide T
1331 Methyl Ethyl Ketone Petroxide R
1332 Methyl Ethyl Ketone Petroxide(Conc 60%) T
1333 Methyl Formate F
1334 Methyl Gluoride (Refrigerant Gas R 41) G
1335 Methyl Hydrazine O
1336 Methyl iodide T
1337 Methyl Isobutyl Carbinol F
1338 Methyl Isobutyl Ketone F
1339 Methyl Isobutyl Ketone Peroxide R
1340 Methyl Isocyanate F T
1341 Methyl Isopropenyl Ketone,Satbilized F
1342 Methyl Isothiocynate T
1343 Methyl Isovalerate F
1344 Methyl magnesium Bromide in Ethyl Ether F
1345 Methyl Mercuric Dicyanamide T
1346 Methyl Mercaptan G
1347 Methyl Methacrylate F
1348 Methyl Methacrylate Monomer , Stabilized F
201
1349 Methyl -N,2,4,6,6, Tetranitroaniline T
1350 Methyl Nitrate G
1351 Methyl Orthosilicate T
1352 Methyl Parathion T T
1353 Methyl Phencepton T
1354 Methyl Phoshonic Dichloride T
1355 Methyl Phosphonic Dichloride
1356 Methyl Propionate F
1357 Methyl Propyl Ether F
1358 Methyl propyl Ketone F
1359 Methyl Styrene F T
1360 Methyl tert-Butyl Ether F
Sr.
No.
Name E F O R C Ra T G
1361 Methyl Thiocyanate T
1362 Methyl Trichloroacetate T
1363 Methyl Trichlorosilane T
1364 Methyl Vinyl Ketone T
1365 Methyl Cinyl Ketone, Stabilized T
1366 Methylallyl Chloride F
1367 Methylamine, Anhydrous G
1368 Methylamyl Acetate F
1369 Methylchlorosilane G
1370 Methylcyclohexane F
1371 Methylcyclohexano,S F
1372 Methylcyclohexanone F
1373 Methylcyclopentane F
1374 Methyldichlorosilane F
1375 Methylene BIS (2-Chloroaniline) T
1376 Methylene Chloride T
1377 Methylenebis, -4,4 (2,-Chloroaniline) T
1378 Methylhydrazine T
1379 Methylisobutyl Ketone T
1380 Methylpentadiene F
1381 Methylphenyldichlorosilane C
1382 Methyltetrahydrofuran F
1383 Methyltrichlorosilane F
1384 Methyol Isodyanate F T
1385 Mevinphos T
1386 Molybdenum and compounds T
1387 Molybdenum Pentachloride C
1388 Molybdenum Powder T
1389 Monocrotophos T
1390 Morpholine F C
1391 Motor Fuel Anti-Knock Mixture T
1392 Motor Spirit or Gasoline or Petrol F
1393 Mustard Gas T
1394 N,N-Diethylethylenediamine C
1395 N, N-Dimethylformamide F
202
1396 N, N-Dimethylaniline T
1397 N-Aminoethylpiperazine C
1398 Naphtha E F
1399 Naphtha Solvent E F
1400 Nephthalene, Crude or Naphthalene, Refind F
1401 Naphthalene, Molten F
1402 Naphthyl Amine T
1403 Naphthylurea T
1404 Naptha (Coal Tar) F
1405 Napthalene T
1406 Napthylamine, -2 T
1407 N-Butyl Acetate T
1408 N-Butyl Alcohol F T
1409 N-Butyl Chloroformate T
1410 N-Butyl Formate F
1411 N-Butyl Isocyanate T
1412 N-Butyl Methacrylate, Stabilized F
1413 N-Butylaniline T
1414 N-Butylimidazole T
1415 N-Decane F
1416 N-Diethylaniline T
1417 N-Dinitrobenzene T
1418 Neon, Refrigerated Liquid G
1419 N-Ethylaniline T
1420 N-Etthylbenzyltoluidines Liquid/Solid T
1421 N-Ethyle-N-Benzylaniline T
1422 N- Ethyltoluidines T
1423 N-Heptaldehyde F
1424 N-Heptene F
1425 N-Hexane F
1426 Nickel and Compounds T
1427 Nickel Carbonyl/Nickel Tetracarbonyl T
1428 Nickel Cyanide T
1429 Nickel Nitrate O
1430 Nickel Nitrite O
1431 Nickel Powder T
1432 Nickel Tetracarbonyl F T
1433 Nicotine T
1434 Nicotine compound,LiquiD,NOS or Nicotine
Preparation,Liquid, NOS
T
1435 Nicotine compound, solid, NOS or Nicotine
Preparation, Solid, NOS
T
1436 Nicotine Hydrochloride, Liquid or Nicotine
Hydrochloride Solution
T
1437 Nicotine Hydrochloride, solid T
1438 Nicotine Salicylate T
1439 Nicotine sulphate T
1440 Nicotine sulphate ,Solid T
1441 Nicotine sulphate,Solution T
203
1442 Nicotine Tartrate T
1443 Nitric Oxide, Compressed G
1444 Nitrates,Inorganic ,Aqueous solution, NOS O
1445 Nitrating Inorganic NOS O
1446 Nitrating Acid Mixture, C
1447 Nitric acid Mixture, spent C
1448 Nitric acid C
1449 Nitric Acid and Dinitrogen Tetroxide Mixture
(Nitric oxide and Nitrogen Dioxide Mixture)
G
1450 Nitric Acid,Red fumming C
1451 Nitric Oxide T
1452 Nitriles,Flammable,Toxic,N.O.S F
1453 Nitriles,Toxic, Flammable, N.O.S T
1454 Nitriles,toxic,NOS T
1455 Nitriles, In organic,Aqueous solution, NOS O
1456 Nitriles, In organic,NOS O
1457 Nitro urea E
1458 Nitroaniline –O T
1459 Nitroaniline-P T
1460 Nitroanilines T G
1461 Nitroanisoles,Liquid/Solid T
1462 Nitrobenzene T
1463 Nitrobenzenesulphonic Acid C
1464 Nitrovenzotrifluorides T
1465 Nitrobromobenzenes,Liquid T
1466 Nitrocellulose E
1467 Nitrocellulose Membrane Filters F
1468 Nitrocellulose Mixture with or without
Plasticizer,with or without Pigment
F
1469 Nitrocellulose solution, Flammable F
1470 Nitrocellulose with alcohol F
1471 Nitrocellulose with water F
1472 Nitrocellulose (Dry) E
1473 Nitrochlorobenzene T
1474 Nitrochlorobenzene-P T
1475 Nitrocresols T
1476 Nitrocyclohexane T
1477 Nitroethane F T
1478 Nitrogen G
1479 Nitrogen Dioxide T
1480 Nitrogen oxide T G
1481 Nitrogen oxides T
1482 Nitrogen Trifluoride T G
1483 Nitrogen Trifluoride, Compressed G
1484 Nitrogen Trioxideo G
1485 Nitrogen,Refrigerated liquid G
1486 Nitroglycerin Mixture, Desensitized solid,
NOS
F
204
1487 Nitroglycerine Mixture Desensitized
Liquid,Flammable, NOS
F
1488 Nitroglycerine Mixture Desensitized Liquid, ,
NOS
F
1489 Nitroglycerine Solution in Alcohol E
1490 Nitroglycerine Solution in Alcohol F
1491 Nitroglycerine E
1492 Nitroguanidine (Picrite) F
1493 Nitroglycerin solution in Alcohol F
1494 Nitrohydrochloric Acid C
1495 Nitromethane F
1496 Nitronaphthalene F
1497 Nitrophenel-P T
1498 Nitrophenels T
1499 Nitropropane-1 F
1500 Nitropropane-2 F
1501 Nitropropanes F
1502 Nitroso Dimethyal Amine T
1503 Nitrostarch E
1504 Nitrostarch wetted F
1505 Nitrosylchloride G
1506 Nitrosylsulphuric Acid Liquid/Solid C
1507 Nitrotoluene T
1508 Nitrotoluenes,Liquid T
1509 Nitrotoluidines (Mono) T
1510 Nitrous Oxide G
1511 Nitrous Oxide, Refrigerated Liquid G
1512 Nitroxylenes, Liquid T
1513 N-Methylaniline T
1514 N-Methylbutylamine F
1515 N-Methyl-N,2,4,6-Tetranitroaniline E
1516 Nonanes F
1517 Nonyltrichorosilane C
1518 n-Propanol (Propylb Alcohol,Normal) F
1519 n-Propyl Acetate F
1520 n-Propyl Chloroformate T
1521 n-Propyl Isocynate T
1522 n-Propyl Nitrate F
1523 n-Propylbenzene F
1524 Octadecyltrichlorosilane C
1525 Octadiene F
1526 Octafluorobt (Refrigerant Gas R 218) G
1527 Octafluorobut-2-Ene (Refrigerant Gas R 1328) G
1528 Octafluorocyclobutane (Refrigerant Gas Rc
318)
G
1529 Octanes F
1530 Octyl Aldehydes F
1531 Octyltrichlorosilane C
1532 O-Dichlorobenzene T
205
1533 Oleum C
1534 O-Nitro Toluene E
1535 OO Diethyl S Eethyl Suph.Methyl Phos T
1536 OO Diethyl S Ethylsulphinylmethyl
Phosphorothioate
T
1537 OO Diethyl S Ethylthiomethyl
Phosphorothioate
T
1538 OO Diethyl S Isopropylthiomethyl
Phosphorothioate
T
1539 Organic Peroxide Type B, Solid O
1540 Organic Peroxide Type B,Liquid,Temperature
controlled
O
1541 Organic Peroxide Type B, Solid O
1542 Organic Peroxide Type B, Solid, Temperature
controlled
O
1543 Organic Peroxide Type C, liquid O
1544 Organic Peroxide Type C, liquid, Temperature
controlled
O
1545 Organic Peroxide Type C, Solid O
1546 Organic Peroxide Type C, Solid, Temperature
controlled
O
1547 Organic Peroxide Type D, liquid O
1548 Organic Peroxide Type D,Liquid, Temperature
controlled
O
1549 Organic Peroxide Type D, Solid O
1550 Organic Peroxide Type D,Solid, Temperature
controlled
O
1551 Organic Peroxide Type E, Liquid O
1552 Organic Peroxide Type E,Liquid, Temperature
controlled
O
1553 Organic Peroxide Type E, solid O
1554 Organic Peroxide Type E,Solid, Temperature
controlled
O
1555 Organic Peroxide Type F, Liquid O
1556 Organic Peroxide Type F,Liquid, Temperature
controlled
O
1557 Organic Peroxide Type F, solid O
1558 Organic Peroxide Type F,Solid, Temperature
controlled
O
1559 Organic Pigments, self-Heating F
1560 Organo Rhodium Complex T
1561 Organoarsenic Compound,NOS T
1562 Organochlorine Pesticide,Liquid,Flammable,
toxic
F
1563 Organochlorine Pesticide,Liquid,Flammable,
toxic
T
1564 Organochlorine Pesticide,Liquid,Toxic,
Flammable
T
1565 Organochlorine Pesticide,solid,Flammable, T
206
toxic
1566 Organometallic Compound or compound
solution or compound Dispersion,water-
Reactive,Flammable, NOS
F
1567 Orgnamometallic Compound, Toxic.NOS T
1568 Organophosphorus compound, toxic,
flammable,NOS
T
1569 Organophosphorus compound,toxic NOS T
1570 Organophosphorus
Pesticide,Liquid,Flammable, toxic
F
1571 Organophosophrus Pesticide,solid,Flammable,
toxic
T
1572 Organophosophrus Pesticide,liquid, toxic T
1573 Organophosophrus Pesticide,liquid,
Toxic,Flammable
T
1574 Organotin compound liquid,NOS T
1575 Orgnotin compound Solid,NOS T
1576 Organotin Pesticide, Liquid,flammable, Toxic F
1577 Organotin Pesticide, Liquid, Toxic T
1578 Organotin Pesticide, Liquid, Toxic ,flammable T
1579 Organotin Pesticide, Solid, Toxic T
1580 Orotic Acid T
1581 Osmium Tetroxide T
1582 O-Toludine T
1583 Oxetane, 3,3-Bis (Chloromethyl) T
1584 Oxidiphenoxarsine T
1585 Oxidizing Liquid,
Corrosive, N.O. S.
O
1586 Oxidizing, Liquid, N.O.S. O
1587 Oxidizing, Liquid,
Toxic, N.O.S.
O
1588 Oxidizing Solid, Corrosive, N.O.S. O
1589 Oxidizing Solid, Flammable N.O.S. O
1590 Oxidizing Solid, N.O.S. O
1591 Oxidizing Solid, Self-Heating, N.O.S. O
1592 Oxidizing Solid, Toxzic N.O.S. O
1593 Oxidizing Solid, Water-Reactive, N.O.S. O
1594 Oxydisulfoton T
1595 Oxygen (Liquid) O G
1596 Oxygen Difluoride T
1597 Oxygen Difluoride
Compressed
G
1598 Oxygen Generator, Chemical O
1599 Oxygen (Liquid) O
1600 O-Xylene F C
1601 Ozone O R T
1602 Pait or Paint Related Material C
1603 Paraffin F
1604 Paraformaldehyde F T
207
1605 Paraoxon (Diethyl 4 Nitrophenyl Phosphate T
1606 Paraquate Methosulphate T
1607 Parathion T
1608 Parathion Methyl T
1609 Paris Green T
1610 Paraxon (Diethyl 4-Nitrophenyl Phosphate) T
1611 Pensulfothion T
1612 Penta Borane F T
1613 Penta Chloro Ethane T
1614 Penta Chloro Phenol T
1615 Pentaborane T
1616 Pentabromodiphenyl Oxide T
1617 Pentabromophenol T
1618 Pentachloro Naphthalene T
1619 Pentachloro Napthalene T
1620 Pentachloroethane T
1621 Pentachlorophenol T
1621 Pentachlorophenol T
1622 Pentadecyl-Amine C
1623 Pentaerythaiotol Tetranitrate T
1624 Pentaerythrite Tentranitrate (Pentaerythritol
Tetranitrate, Petn) Wetted
E
1625 Pentaerythrite Tentranitrate Mixture,
Desensitised, Solid, N.O.S.
F
1626 Pentaerythritol Tetranitrate E T
1627 Pentafluoroethane
(Refrigerant Gas R 125)
G
1628 Pentaghlorophenol T
1629 Pentamethlheptane F
1630 Pentane T
1631 Pentane-2, 4-Dione F
1632 Pentanes, Liquid F
1633 Pentanone, 2, 4-Methyl T
1634 Peracetic Acid R C
1635 Peradetic Acid T
1636 Perchlorates, Inorganic, Aqueous Solution,
N.O.S.
O
1637 Perchlorates, Inorganic, N.O.S. O
1638 Perchloric Acid C
1639 Perchloroethylene T
1640 Perchloromethyl Mercptan T
1641 Perchloryl Fluoride G
1642 Percussion Caps E
1643 Perfluoro (Ethyl Vinyl Ether) G
1644 Perfluoro (Methyl Vinyl Ether) G
1645 Permanganates, Inorganic, Aqueous, Solution,
N.O.S.
O
1646 Permanganates, Inorganic, N.O.S. O
1647 Peroxides, Inorganic, N.O.S. O
208
1648 Peroxyacetic Acid O
1649 Persulphates, Inorganic, Aqueous Solution,
N.O.S.
T
1650 Persulphates, Inorganic, N.O.S. O
1651 Pesticide, Liquid, Toxic, Flammable, N.O.S. T
1652 Pesticide, Liquid, Toxic, Flammable, N.O.S. F
1653 Pesticide, Liquid, Toxic, N.O.S. T
1654 Pesticide, Solid, Toxic, N.O.S. T
1655 Petanone, 2-4,-Methyl F T
1656 Petroleum Crude Oil F
1657 Petroleum Gases, Liquefied G
1658 Phenacyl Bromide T
1659 Phenetidines T
1660 Phenol T
1661 Phenol Solution T
1662 Phenol, Molten T
1663 Phenol, Solid T
1664 Phenol, 2,2-Thiobis (4Chloro 6 Methyl Phenol) T
1665 Phenol, 2,2-Thiobis (4,6-Dichloro) T
1666 Phenol, 3-(1-Metholethyl)-Methylcarbonate T
1667 Phenolsulphonic Acid, Liquid C
1668 Phenoxyacetic Acid Deriavative Pesticide,
Liquid, Flammable, Toxic
F
1669 Phenoxyacetic Acid Deriavative Pesticide,
Liquid, Flammable, Toxic
T
1670 Phenoxyactic Acid Deriavative Pesticide,
Liquid, Toxic, Flammable
T
1671 Phenoxyacetic Acit Deriavative Pesicide,
Solid, Toxic
T
1672 Phenyl Chloroformate T
1673 Phenyl Glycidal Ether T
1674 Phenyl Hydraine Hydrochloride T
1675 Phenyl Isocyanate T
1676 Phenyl Mercury Acetate T
1677 Phenyl Silatrane T
1678 Phenyl Thiourea T
1679 Phenylacetonitrile, Liquid T
1680 Phenylacetyl Chloride C
1681 Phenylcarbylamine Chloride T
1682 Phenylene P-Diamine T
1683 Phenylenediamines T
1684 Phenylhydrazine T
1685 Phenylmercuric Acetate T
1686 Phenylmercuric Compound, N.O.S. T
1687 Phenylmercuric Hydroxide T
1688 Phenylmercuric Nitrate T
1689 Phenylmercury Acetate T
1690 Phenylphosphorus Dichloride C
1691 Pheylphosporus Thiodichloride C
209
1692 Phenyltrichlorosilane C
1693 Phorate T
1694 Phorothioc Acid, OO Dimethyl S-(2-Methyl) T
1695 Phosacetim T
1696 Phosalone T
1697 Phosaoetin T
1698 Phosazetin T
1699 Phosfolan T
1700 Phosgene G
1701 Phosgene (Carbonyl Chloride) F T
1702 Phosmet T
1703 Phosphamidon T
1704 Phosphine G
1705 Phosphine (Hydrogen Phosphide) F T
1706 Phosphoric Acid O C
1707 Phosphoric Acid & Esters C T
1708 Phosphoric Acid Dimethyl (4-Methl Thio)
Phenyl
T
1709 Phosphoric Acid, Bromoethyl Bromo (2,2-
Dimethylpropyl) Bromoethyl Ester
T
1710 Phosphoric Acid, Liquid/Solid C
1711 Phosphorothioc Ethyl-Methyl Ester C
1712 Phosphorothioic Acid, Methyl-Ethyl Ester C
1713 Phosphorothioic Acid Methyl (Ester) C
1714 Phosphorous F
1715 Phosphorous Pentaxide F O
1716 Phosphorous and Compounds F T
1717 Phosphorous Oxychloride T
1718 Phosphorous Penta Chloride T
1719 Phosphorous Trichloride T
1720 Phosphorus Acid C
1721 Phosphorus Heptasulphide F
1722 Phosphorus Oxybromide C
1723 Phosphorus Oxybromide, Molten C
1724 Phosphorus Oxychloride C
1725 Phosphorus Pentabromode C
1726 Phosphorus Pentachloride C
1727 Phosphorus Pentafluoride, Compressed G
1728 Hosphorus Pentasulphide F
1729 Phosphorus Pentoxide C
1730 Phosphorus Sesquisulphide F
1731 Phosphorus Tribromide C
1732 Phosphorus Trichloride T
1733 Phosphorus Trioxide C
1734 Phosphorus Trisulphide F
1735 Phosphorus, Amosphous F
1736 Phosphorus, White or Yellow, Dry or Under
Water or in Solution
F
1737 Phosphorus, White, Molten F
210
1738 Phthalic Anhydride C T
1739 Phylloquinone T
1740 Physostignine T
1741 Physostignine Salicylate (1:1) T
1742 Picolines F
1743 Picric Acid (2,4,60Trinitrophenol) E T
1744 Pine Oil F
1745 Piperaxine C
1746 Piperdine T
1747 Piperidine C
1748 Plastics, Nitrocellulose-Based, Self-Heating,
N.O.S.
F
1749 Platinous Chloride T
1750 Platinum Tetrachloride T
1751 P-Nitrophenol T
1752 P-Nitrosodimethylaniline F
1753 Polybrominated Biphenyls T
1754 Polychlorinated Biphenyls T
1755 Polyester Resin Kit F
1756 Polyhalogenated Biphenyls, Liquid or
Polyhalogenated Terphenyls, Liquid
T
1757 Polymeric Beads, Expandable F
1758 Potassium F
1759 Potassium Nitride C
1760 Potassium Peroxide F C
1761 Potassium Silver Cyanide T
1762 Potassium Arsenate T
1763 Potassium Arsenite T
1764 Potassium Bromate O
1765 Potassium Chlorate O
1766 Potassium Chlorate, Aqueous Solution O
1767 Potassium Cuprocyanide T
1768 Potassium Cyanide T
1769 Potassium Dithionite (Potassium
Hydrosulphite)
F
1770 Potassium Fluoride T
1771 Potassium Fluoroacetate T
1772 Potassium Fluorosilicate T
1773 Potassium Hydrogen Sulphate C
1774 Potassium Hydrogendifluoride C
1775 Potassium Hydroxide C
1776 Potassium Hydroxide, Solid C
1777 Potassium Hydroxide, Solution C
1778 Potassium Metavanadate T
1779 Potassium Monoxide C
1780 Potassium Nitrate O
1781 Potassium Nitrate and Sodium Nitrite Mixture O
1782 Potassium Nitride O C
1783 Potassium Nitrite O
211
1784 Potassium Perchlorate O
1785 Potassium Permanganae O
1786 Potassium Peroxide O
1787 Potassium Persulphate O
1788 Potassium Phosphide F
1789 Potassium Sulphide, Anhydrous or Potassium
Sulphide
F
1790 Potassium Sulphide, Hydrated C
1791 Potassium Superoxide O
1792 Pottasium Arsenite T
1793 Powdered Metals and Mixtures T
1794 Promurit, (1,(3,4-Dichlorophenyl)-3
Triazenethiocarboxamide)
T
1795 Propadiene, Stabilized G
1796 Propane G
1797 Propanesultone-1,3 T
1798 Propanesultone-1,3 F
1799 Propargyl Alcohol T
1800 Propargyl Bromide T
1801 Propen-1, -2-Chloro-1, 3. diol-Diacetate T
1802 Propen-2-Chloro 1,3-Diou Diou Diacetate T
1803 Prophyl Alcohol F
1804 Prophylene Oxide R
1805 Propiolactone Beta R
1806 Propionic Acid C
1807 Propionic Anhydride C
1808 Propionitrile F T
1809 Propionitrile, 3-Chloro T
1810 Propionyl Chloride F
1811 Propiophenone, 4-Amino T
1812 Propyl Acetate-N F
1813 Propyl Chloride F
1814 Propyl Chloroformate T
1815 Propyl Formates F
1816 Propylamine F
1817 Propylene G
1818 Propylene Chlorohydrin T
1819 Propylene Dichloride T
1820 Propylene Glycol, Allyether T
1821 Propylene Oxide F
1822 Propylene Tetramer F
1823 Propyleneamine T
1824 Propyleneimine, Stabilized F
1825 Propyltrichlorosilane C
1826 Plassium Borohydride F
1827 Puinone T
1828 Pyrazoxon T
1829 Pyrene T
1830 Pyrethroid Pesticide, Liquid, Flammable, F
212
Toxic
1831 Pyrethroid Pesticide, Liquid, Toxic T
1832 Pyrethroid Pesticide, Liquid, Toxic,
Flammable
T
1833 Pyrethroid Pesticide, Solid, Toxic T
1834 Pyridine F T
1835 Pyridine, 2-Methyl-3-Vinyl T
1836 Pyridine, 4-Nitro 1-Oxide O T
1837 Pyriminil T
1838 Pyrophoric Liquid, Inorganic, N.O.S. F
1839 Pyrophoric Liquid, Organic, N.O.S. F
1840 Pyrophoric Metal, N.O.S. or Pyrophoric Alloy,
N.O.S.
F
1841 Pyrophoric Organometallic Compound, Water-
Reactive, N.O.S. Liquid
F
1842 Pyrophoric Solid, Inorganic, N.O.S. F
1843 Pyrophoric Solic, Organic, N.O.S. F
1844 Pyrosulphuryl Chloride C
1845 Pyrrolidine T
1846 Quinaliphos T
1847 Quinoline T
1848 Quinone T
1849 Radioactive Material, Uranium Hexafluoride Ra
1850 Radioactive Material, Uranium Hexafluoride,
Fissile
Ra
1851 Rare Gases and Nitrogen Mixture, Compressed G
1852 Rare Gases and Oxygen Mixture, Compressed G
1853 Rare Gases Mixture, Compressed G
1854 Receptacles, Small, Containing Gas (Gas
Cartridges)
G
1855 Refrigerant Gas R 404A G
1856 Refrigerant Gas R 407A G
1857 Refrigerant Gas R 407B G
1858 Refrigerant Gas R 407C G
1859 Refrigerating Machines G
1860 Resin Solution F
1861 Resorcinol T
1862 Rhodium Trichloride T
1863 Rockets E
1864 Rubidium Hydroxide C
1865 Rubidium Hydroxide Solution C
1866 Salcomine T
1867 Sarin T
1868 Seed Cake F
1869 Selenates or Selenites T
1870 Selenic Acid C
1871 Selenious Acid T
1872 Selenium Compound, N.O.S. T
1873 Selenium Disulphide T
213
1874 Selenium Hexafluoride T G
1875 Selenium Oxychloride C
1876 Self-Heating Liquid, Corrosive Inorganic,
N.O.S.
F
1877 Self-Heating Liquid, Corrosive Oragnic,
N.O.S.
F
1878 Self-Heating Liquid, Inorganic, N.O.S. F
1879 Self-Heating Liquid, Organic, N.O.S. F
1880 Self-Heating Liquid, Toxic, Inorganic N.O.S. F
1881 Self-Heating Liquid, Toxic, Organic, N.O.S. F
1882 Self-Heating Solid, Corrosive, Organic, N.O.S. F
1883 Self-Heating Solid, Corrsive, Inorganic, N.O.S. F
1884 Self-Heating Solid, Inorganic, N.O.S. F
1885 Self-Heating Solid, Organic, N.O.S. F
1886 Self-Heating Solid, Oxidizing, N.O.S. F
1887 Self-Heating Solid, Toxic, Inorganic, N.O.S. F
1888 Self-Heating Solid, Toxic, Organic, N.O.S. F
1889 Self-Reactive Liquid Type B F
1890 Self-Reactive Liquid Type B, Temperature
Controlled
F
1891 Self-Reactive Liquid Type C F
1892 Self-Reactive Liquid Type C, Temperature
Controlled
F
1893 Self-Reactive Liquid Type D F
1894 Self-Reactive Liquid Type D, Temperature
Controlled
F
1895 Self-Reactive Type E F
1896 Self-Reactive Type E, Temperature Controlled F
1897 Self-Reactive Liquid Type F F
1898 Self-Reactive Liquid Type F, Temperature
Controlled
F
1899 Self-Reactive Solid Type B F
1900 Self-Reactive Solid Type B, Temperature
Controlled
F
1901 Self-Reactive Solid Type C F
1902 Self-Reactive Solid Type C, Temperature
Controlled
F
1903 Self-Reactive Solid Type D F
1904 Self-Reactive Solid Type D, Temperature
Controlled
F
1905 Self-Reactive Solid Type E F
1906 Self-Reactive Solid Type E, Temperature
Controlled
F
1907 Self-Reactive Solid Type F F
1908 Self-Reactive Solid Type F, Temperature
Controlled
F
1909 Semicarbazide Hydrochloride T
1910 Silane (4-Amino Butyl) Diethoxy-Meth T
1911 Silane, Compressed G
214
1912 Silicon Tetrachloride C
1913 Silicon Tetrafluoride, Compressed G
1914 Silver Arsenite T
1915 Silver Cyanide T
1916 Silver Nitrate O
1917 Silver Picrate, Wetted F
1918 Sludge Acid C
1919 Soda Lime C
1920 Sodium F
1921 Sodium Hydrosulphide C
1922 Sodium Acetoxy Triphenyl T
1923 Sodium Aluminate Solution C
1924 Sodium Aluminate, Solid C
1925 Sodium Aluminium Hydride F
1926 Sodium Ammonium Vanadate T
1927 Sodium Anthra-Quinone-1-Sulphonate T
1928 Sodium Arsanilate T
1929 Sodium Arsenate T
1930 Sodium Arsenite T
1931 Sodium Arsenite, Aqueous Solution T
1932 Sodium Arsenite, Solid T
1933 Sodium Azide T
1934 Sodium Borohydride and Sodium Hydroxide
Solution
C
1935 Sodium Bromate O
1936 Sodium Cacodylate T
1937 Sodium Chlorate E O R
1938 Sodium Chlorate, Aqueous Solution O
1939 Sodium Chlorite O
1940 Sodium Chloroacetate T
1941 Sodium Cuprocyanide, Solid T
1942 Sodium Cuprocyanide, Solution T
1943 Sodium Cyanide T
1944 Sodium Dinitro-O-Cresolate E
1945 Sodium Dinitro-O-Cresolate Wetted F
1946 Sodium Dithionite (Sodium Hydrosulphite) F
1947 Sodium Fluoride T
1948 Sodium Fluoro Acetate T
1949 Sodium Fluoro-Acetate T
1950 Sodium Fluorosilicate T
1951 Sodium Hydride F
1952 Sodium Hydrogendifluoride C
1953 Sodium Hydrosulphide F
1954 Sodium Hydroxide C
1955
Sodium Hydroxide Solution C
1956 Sodium Hydroxide, Solid C
1957 Sodium Methylate F T
1958 Sodium Monoxide C
215
1959 Sodium Nitrate O T
1960 Sodium Nitrate and Potassium Nitrate mixture O
1961 Sodium nitrate O
1962 SodiumPentachlorophenate T
1963 Sodium Pentachloro-Phenate T
1964 Sodium Perchlorate O
1965 Sodium Permanganate O
1966 Sodium Peroxide O
1967 Sodium Peroxoborate, Anhydrous O
1968 Sodium persulphate O
1969 Sodium Phosphide F
1970 Sodium Picramate E T
1971 Sodium Picranate, Wetted F
1972 Sodium Selenate T
1973 Sodium Selenite T
1974 Sodium Sulphide O C
1975 Sodium Sulphide, Anhydrous or Sodium
Sulphide
F
1976 Sodium Sulphide, Hydrated C
1977 Sodium Superoxide O
1978 Sodium Tellorite C
1979 Sodiumanthra-Qunone-1-Sulphanate C
1980 Solid Containing Corrosive Liquid, N.O.S. C
1981 Solid Containing Flammable Liquid, N.O.S. F
1982 Solid Containing Toxic Liquids N.O.S T
1983 Sopropyl T
1984 Stannane Acetoxy Triphenyl T
1985 Stannic Chloride Pentahydrate C
1986 Stannic Chloride, Anhydrous C
1987 Stannic Phosphides F
1988 Stibine G
1989 Stibine (Antimony Hydride) T
1990 Strontium Arsenite T
1991 Strontium Chlorate O
1992 Strontium Nitrate O
1993 Strontium Perchlorate O
1994 Strontium Peroxide O
1995 Strontium Phosphide F
1996 Strychnine or Strychnine Salts T
1997 Strychinine Sulphate T
1998 Styphinine Acid (2,4,6-Trinitroresorcinol) T
1999 Styrene F
2000 Styrene Monomer, Stablized F
216
2001 Styrene,1,1,2,2-Tetrachloroethane F T
2002 Substituted Nitro Pesticide, Liquid,Flammable F
2003 Substituted Nitro Pesticide, Liquid,Toxic T
2004 Substituted Nitro Pesticide,
Liquid,Toxic,Flammable
T
2005 Substituted Nitro Pesticide, Solid,Toxic T
2006 Sulfotep T
2007 Sulotep T
2008 Sulphanmic Acid C
2009 Sulphotec C
2010 Sulphoxide,3-chloro octyl T
2011 Sulphur Chloride C
2012 Sulphur Dichloride T
2013 Sulphur Dioxide T G
2014 Sulphur Hexafluoride G
2015 Sulphurnibicgkirude T
2016 SulphurTetrafluoride G
2017 Sulphur Trioxide C
2018 Sulphur Trioxide, Stablized C
2019 Sulphur, Molten F
2020 Sulphuric Acid C
2021 Sulphuric Acid or Battery Fluid, Acid C
2022 Sulphuric Acid, Fuming C
2023 Sulphuric Acid, Spent C
2024 Sulphrous Acid C
2025 Sulphuryl Chloride C
2026 Sulphuryl Fluoride G
2027 Suphuric Acid C T
2028 Tars, Liquid F
2029 T-chloro 1,2,2,2- G
2030 Tear Gas Candles T
2031 Tellurium Compound, N.O.S. T
2032 Tellurium Hexafluoride T G
2033 Tellurium Hexafluride T
2034 Tellurium(Powder) T
2035 Tepp (Tetraethyl Pyrophosphate) T
2036 Terbufos T
2037 Terpene Hydrocarbns, N.O.S F
2038 Terpinolene F
2039 Ter Butyl Peroxyiso-Butrate T
2040 Tert Butyl Peroxy Isopropyl T
217
2041 Tert Butyl Peroxy Isopropyl T
2042 Tert-Butyl Perdoxyacetate(Conc>70%) T
2043 Tert Butyl Alcohol T
2044 Tert Butyl Anate T
2045 Tert Butylcyclo F
2046 Tert-Butylcyclohexyl Chloroformate T
2047 Tera Hydrofuran F
2048 Tera Methyl Lead T
2049 Tera Nitromethane T
2050 Terabromobisphenol-A T
2051 Terabromoethane T
2052 Tetrachloro2,2,5,6,2,5-Cyclogexadube-1,4-
Dione
T
2053 Tetrachlorodibenzo-P-Dioxin,2,3,7,8(Tcdd) T
2054 Tetrachloroethylene T
2055 Tetractyle Lead T
2056 Tetractyle Lead T
2057 Tetraethyl Dithiopyrophosphate T
2058 Tetraethyl Lead T
2059 Tetraethyl Silicate F
2060 Tetraethylenepentamine C
2061 Tetrafluoroethane T
2062 Tetrafluoroethylene, Stabilized G
2063 Tetrafluoromethane Compressed (Refrigerant
Gas R14, Compressed)
G
2064 Tetrafluriethyne T
2065 Tetrahydrofuran F T
2066 Tetrahydrofurfurylamine F
2067 Tetrahydrophthalic Anhydrides C
2068 Tetrahydrothiophene F
2069 Tetramethyl Lead T
2070 Tetramethylammonium Hydroxide C
2071 Tetramethyl Disulphotetramine T
2072 Tetramethylsilane F
2073 Tetranitroaniline E
2074 Tetranitromethane O
2075 Tetrapropyl Orthotitanate F
2076 Tetrazol-1-Acetic Acid E
2077 Thallium and Compounds T
2078 Thallium Carbonate T
2079 Thallium Chlorate O
218
2080 Thallium Compound. N.O.S. T
2081 Thallium Nitrate T
2082 Thallic Oxide T
2083 Thallium Sulphate T
2084 Thallous Chloride T
2085 Thallous Malonae T
2086 Thallus Sulphate T
2087 Thionyl Chloride T
2088 Thioacetic Acid F
2089 Thiocarbamate Pesticide, Liquid, Flammable
Toxic
T
2090 Thiocarbamate Pesticide, Liquid, Toxic F
2091 Thiocarbamate Pesticide, Liquid,
Toxic,Flammable
T
2092 Thiocarbomate Pesticide, Liquid Toxic,
Flammable
T
2093 Thiocarbamate Pesticide, Solid, Toxic T
2094 Thiocarbaxide T
2095 Thiocynamicacid,2-
(Benzothiazolyethio)Methyl
T
2096 Thiofamox T
2097 Thioglycol T
2098 Thioglycolic Acid C
2099 Thiometon T
2100 Thionaxin T
2101 Thionyl Chloride C
2102 Thiophene F
2103 Thiophenol T
2104 Thiophosgene T
2105 Thiophosphoryl Chloride C
2106 Thiosemicarbaxide T
2107 Thiourea(2-Methyl Phenyl) C
2108 Thiourea Dioxide F
2109 Thiourea (R-Chloro-Phenyl) C
2110 Thiourea (2-Methyl-1-3-Di-Thiolane) C
2111 Thiram T
2112 Tirpate T
2113 Tirpate (2,4-Dimethyl-1-3-Dithiolane) T
2114 Titanium Disulphide F
2115 Titanium Hydride F
2116 Titanium Powder T
2117 Titanium Power, Dry F
219
2118 Titanium Sponge Granule or Titanium Sponge
Powders
F
2119 Titanium Tetrachloride C
2120 Titanium Tetra-Chloride T
2121 Titanium Trichloride, Pyrophoric or Titanium
Trichloride Mixture, Pyrophoric
F
2122 Titanium Tetrachloride Mixture C
2123 Toluene F
2124 Toluene2,6-Diisocynate T
2125 Toluene 2,4-Diisocynate T
2126 Toluene Diisocynate T
2127 Toluene-2,4-Diisocynate T
2128 Toluene-2-4-Diisocynate T
2129 Toluidine-o T
2130 Toluidines,Liquid/Solid T
2131 Toxic Liquid T
2132 Toxic Liquid Flammable, Organic, N.O.S T
2133 Toxic Liquid inorganic, N.O.S T
2134 Toxic Liquid Organic, N.O.S T
2135 Toxic Liquid, Oxidizing, N.O.S T
2136 Toxic Liquid, Water Reactive, N.O.S T
2137 Toxic solid, Corrosive, Inorganic, N.O.S T
2138 Toxic solid, Corrosive, Organic, N.O.S T
2139 Toxic Solid, Flammable, Organic, N.O.S T
2140 Toxic solid, Inorganic, N.O.S T
2141 Toxic solid, Organic, N.O.S T
2142 Toxic solid, Oxidising, N.O.S T
2143 Toxic solid, Self- Heating, N.O.S T
2144 Toxic Solid, Water Reactive, N.O.S. T
2145 Toxins, Extacted From Living Sources,
Liquid/Solid N.O.S
T
2146 Trans-1,4-Dichloro-Butene T
2147 Tri Nitro Anisol T
2148 Tri Orthocresyl Phosphate T
2149 Tri (Cyclohexyl) Methylstannyl 1,2,4 Triazole T
2150 Tri (Cyclohexyl) Stannyl 1-H-1,2,4-Triazole T
2151 Triallyl Borate T
2152 Triallylamine F
2153 Triamino,-1,3,5,2,4,6-Trinitro-Benzene E T
2154 Triaminotrinitrobenzene T
2155 Triazine Pesticide, Liquid, Flammable Toxic F
220
2156 Triazine Pesticide, Liquid, Toxic, Flammable T
2157 Triazine Pesticide, Liquid, Toxic, Flammable T
2158 Triazine Pesticide, Solid, Toxic T
2159 Tribromophenol2,4,6 T
2160 Tributylamine T
2161 Tributylphosphane F
2162 Trichloro (Chloromethyl) Silane T
2163 Trichloro Acetyl Chloride T
2164 Trichloro Chloromehtyl Silane T
2165 Trichloro Ethane T
2166 Trichloro Napthalene T
2167 Trichloro Acetic Solution C
2168 Trichloro Acetic Acid Solution C
2169 Trichloroacetyl Chloride C
2170 Trichlorobennzene, Liquid T
2171 Trichlorobutene T
2172 Trichlorodethylene T
2173 Trichlorodichlorophenylsilane T
2174 Trichloroethane,1,1,-1 T
2175 Trichloroehtyl Silane T
2176 Trichloroethylene T
2177 Trichloroisocy Anuric Acid, Dry O
2178 Trichloromethanem Sulphenyl Chloride T
2179 Trichloronate T
2180 Trichlorophenol 2,3,6 T
2181 Trichlorophenol 2,4,5 T
2182 Trichlorophenol 2,2,6 T
2183 Trichlorophenol 2,4,5 T
2184 Trichlorophenyl Silane T
Sr.
No.
Name E F O R C Ra T G
2184 TrichlorophenylSilane T
2185 Trichloropheon T
2186 Trichlorosilane F
2187 Tricresyl Phosphate O T
2188 TriethoxySilane T
2189 TriethylPhosphite F
2190 Triethylamine F C
2191 Triethylene Melamine T
2192 Triethylenetetramine C
2193 Trifuoroacetic Acid C
2194 Trifluoroacetyl Chloride G
2195 Trifluoromethane (Refrigernate Gas R 23) G
221
2196 Trifluoromethane, Refrigerated Liquied G
2197 Triisobutylene F
2198 Trimethyl Borate F
2199 TrimethylChlorosilane T
2200 TrimethylPhosphite F
2201 Trimethyl Propane Phosphite T
2202 Trimethyl Tin Chloride T
2203 Trimethylacetyi Chloride T
2204 Trimethylamine, Anhydrous G
2205 Trimethylamine, Aqueous F
2206 Tremithylchlorosilane F
2207 Trimethylcyclohexylamine C
2208 TrimethylhexamethyleneDiisocyanate T
2209 Trimethylhexamethylene-Diamines C
2210 TrimethylpropanePhosphite T
2211 Trinitro Aniline E
2212 Trinitro Benzene E
2213 Trinitro Benzoic Acid C
2214 Trinitro-in-Cresol C
2215 TrinitroPhenetole T
2216 Trinitroaniline T
2217 Trinitroaniline (Picramide) E
2218 Trinitroanlsle,-2,4,6 E
2219 Trinitroanisole E
2220 Trinitroanisole, 2, 2, 4, 6 T
2221 Trinitrobenzene E T
2222 Trinitrobenzene, Wetted F
2223 Trinitrobenzenesulphonic Acid E
2224 Trinitrobenzoic Acid E
2225 Trinitrobenzoic Acid, Wetted F
2226 Trinitrochlorobenzene (Picryl Chloride) E
2227 Trinitrochlorobenzene (Picryl Chloride) E
2228 Trinitrocresol E T
2229 Trinitroesorenol, 2, 4, 6 (Styphnic Acid) T
2230 Trinitrofluorenone E
2231 Trinitro-M-Cresol E
2232 Trinitronaphthalene E
2233 Trinitrophenetole E
2234 Trinitrophenetole,2,4,6 E T
2235 Trinitrophenol, Wetted F
2236 Trinitrophenylmethylnitramiine (Tetryl) E
2237 Trinitrorsorcinol (Styphnic Acid) E
2238 Trinitrorsorcinol,-2,4,6(Styphnic Acid) E
2239 Trinitrotoluene E
2240 Trinitrotoluene (Tnt) E
2241 Trinitrotoluene, Wetted F
2242 Triorthocresyl Phosphate T
2243 Tripate(2,4-Dimethyl-1,3-Dithiolance) T
2244 Triphenyl Tin Chloride T
222
2245 Tripropylamine F
2246 Tritrotylene F
2247 Tris (1-Aziridinyl) Phosphine Oxide Solution T
2248 Tris (2-Chloroethyl) Camine T
2249 Trisopropyl Borate F
2250 Tungsten Hexafluride G
2251 Turpentine F
2252 Uranium and Compounds T
2253 Urea Hydrogen Peroxide O
2254 Urea Nitrate E
2255 Urea Nitrate, Wetted F
2256 Valeraldehyde F
2257 Valeryl Chloride C
2258 ValinoMycin T
2259 Vanadium and Compounds T
2260 Vanadium Comounds, N.O.S. T
2261 Vanadium Oxtrichloride C
2262 Vanadium Pentaoxide T
2263 Vanadium Pentoxide T
2264 Vanadium Tetrachloride C
2265 Vanadium Trichloride C
2266 Vanadyl Sulphate T
2267 Vinyl Acetate Mononer T
2268 Vinyl Bromide T
2269 Vinyl Bromide, Stabilized G
2270 Vinyl Butyrate, Stabilized F
2271 Vinyl Chloride E T
2272 Vinyl Chloride, Stabilized G
2273 Vinyl Chloroacetate T
2274 Vinyl Fluoride T
2275 Vinyl Isobutyl Ether, Stabilized F
2276 Vinyl Methyl Ether, Stabilized G
2277 Vinyl Norbornene T
2278 Vinyl Toluene E T
2279 Vinylcyclohexen Dioxide T
2280 Vinyledene Chloride T
2281 Vinylidene Chloride, Stabilized F
2282 Vinylpyridines, , Stabilized T
2283 Vinyltoluenes, , Stabilized F
2284 Vinyltrichlorosilane, , Stabilized F
2285 Vutyl Amine Tert T
2286 Warfarin T
2287 Warfarin Sodium T
2288 Water-Reactive Liquid, N.O.S. E F O R C T
2289 Water-Reactive Solid, N.O.S. E F O R C T
2290 White Asbestos T
2291 Xanthates F
2292 Xenon, Compressed G
2293 Xenon, Refrigerated Liquid G
223
2294 Xylene F T
2295 Xylene Dichloride T
2296 Xylenes F
2297 Xylenols T
2298 Xylidine T
2299 Xylidines, Liquid /Solid T
2300 Xylyl Bromide T
2301 Zinc Ammonium Nitrite O
2302 Zinc and Compounds T
2303 Zinc Arsenate, ZincArsenite or Zinc Arsenate and Zinc
Arsenite Mixture
T
2304 Zinc Bromate O
2305 Zinc Chlorate O
2306 Zinc Chloride Solution C
2307 Zinc Cyanide T
2308 Zinc Dichloropentanitrile T
2309 Zinc Dithionite (Zinc Hydrosulphite) T
2310 Zinc Fluorosilicate T
2311 Zinc Phosphide F
2312 Zinc Resinate F
2313 Zirconium and Compounds F
2314 Zirconium Nitrate O
2315 ZirconiumPicramate E
2316 Zirconium Powder, Dry F
2317 Zirconium Scrap F
2318 Zirconium Tetrachloride C
2319 Zirconium, Dry F T
224
Chapter VI – Control of Traffic
138. Signals and additional safety measures for motor vehicle
(1) The driver of a 1[motor vehicle] shall make such signals and on such occasions as are
specified in the regulations made under section 118.
(2) The driver of a motor cycle shall, in addition to the safety measures mentioned in sub-
section (1) of section 128, comply with the requirements of rule 123.
2[ 3[(3) In a motor vehicle, in which seat-belts have been provided under sub-rule (1) or
sub-rule (1-A) of rule 125 or rule 125-A, as the case may be, it shall be ensured that the driver,
and the person seated in the front seat or the persons occupying front facing rear seats, as the
case may be, wear the seat belts while the vehicle is in motion.]
(4) On and after expiry of one year from the date of commencement of the Central Motor
Vehicles (Amendment) Rules, 1999, the driver of every vehicle shall ensure that the following
items are carried in the vehicle, namely:—
4[(a) in case of vehicles other than motor cycles, a set of spare bulbs for headlamp and
fuses, and a spare wheel ready for use;
Provided that in case of M1 and N1 categories of vehicles , use of temporary use spare
wheel shall be permitted and the provision of ready to use spare wheel shall not be mandatpry, if
such vehicles are fitted with Run Flat Tyres as standard]
(b) tool kit as prescribed by the manufacturer;
(c) triangles of size 150 mm with a red reflecting surface as per IS: 8339— 1993
specified by the Bureau of Indian Standards, for keeping in front and rear of the
vehicle in case the vehicle is stranded on the road (applicable to vehicles other
than two,and three-wheelers); as specified below, namely:—
one triangle in case of four-wheelers with GVW not exceeding 7.5 tons;
two triangles in case of four-wheelers with GVW exceeding 7.5 tons:
5[Provided that in case of vehicles manufactured on and after 1st January, 2003, the
triangles of size and specification shall conform to AIS : 022-2001, as may be amended from
time to time, till such time as corresponding Bureau of Indian Standards specifications are
notified:]
_______________________
1. Substituted by G.S.R. 214(E), dated 18-3-1999, for “motor cycle” (w.e.f. 18-3-1999).
2. Inserted by G.S.R. 214(E), dated 18-3-1999 (w.e.f. 18-3-1999).
3. Sub-R. (3) substituted by G.S.R. 699(E), dated 10-10-2002 (w.e.f. 10-10-2002).
4. Subs by GSR 625(E) dated 8th August, 2012 for Clause (a) (w.e.f. 08.08.2012)
5. Inserted by G.S.R. 400(E), dated 31-5-2002 (w.e.f. 31-5-2002).
225
1[***]
(d) first aid kit containing a tube of antiseptic cream containg 0.5% of Centrimide
B.P. in a non-greasy, sterilized dressing, sterilized elastic plaster, water proof
plaster, gauze and elastic bandage for wounds and burns;
(e) number of chock blocks for four-wheelers as specified below, namely:— one
chock block in case of four-wheelers with GVW exceeding 4 tons and less than
7.5 tons;
two chock blocks in case of 4-wheelers with GVW exceeding 7.5 tons;
The vehicle manufacturer shall ensure that the above items are supplied at the
time of first sale of vehicle;
2[(f) at the time of purchase of the two wheeler, the manufacturer of the two wheeler
shall supply a protective headgear conforming to specifications prescribed by the
Bureau of Indian Standards under the Bureau of Indian Standards Act, 1986 (63
of 1986):
Provided that these conditions shall not apply to category of persons
exempted in terms of section 129 and the rules made thereunder by the concerned
State Government. ]
`(5) Halogen bulbs with P45t cap shall not be used for headlights on all vehicles. Wattage of
halogen bulbs shall not exceed 70/75 watts for 24 volts and 60/65 for 12 volts systems.]
3[139. Production of licence and certificate of registration
1[Production of licence and certificate of registration. The driver or conductor of a motor
vehicle shall produce certificate of registration, insurance, fitness and permit, the driving licence
and any other relevant documents on demand by any police officer in uniform or any other
officer authorized by the State Government in this behalf, and if any or all of the documents are
not in his possession, he shall produce in person an extract or extracts of the documents duly
attested by any police officer or by any other officer or send it to the officer who demanded the
documents by registered post within 15 days from the date of demand. ]
——————–
1. Proviso omitted by GSR 784(E) dated, 12 November,2008
2. CI. if) inserted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 16-3-2006).
3. Substituted by G.S.R. 76(E), dated 31-1-2000 (w.e.f. 31-1-2000). Earlier R. 138 was
substituted by G.S.R. 684(E), dated 5-10-1999 (w.e.f. 22-10-1999).
226
Chapter VII – Insurance of Motor Vehicles against Third Party Risks
140. Definitions
In this Chapter, unless the context otherwise requires,— (i) “accounting year” means the
year commencing on the first day of April, and ending with the 31 st day of March of the
following year;
(ii) “approved list” means the list of foreign insurers and their guarantors maintained by the
Central Government under these rules;
(iii) “Authority” means the Central Government or a State Government or any local authority
or any State Transport Undertaking, motor vehicles owned by whom have been exempted
from the compulsory insurance under sub-section (2) of section 146;
(iv) “bank” means a company which accepts, for the purpose of lending or investment, deposits
of money from the public repayable on demand or otherwise, and withdrawal by cheque,
draft, order or otherwise;
Explanation.—Any company which is engaged in the manufacture of goods or
carries on any trade and which accepts deposits of money from the public merely for the
purpose of financing its business as such manufacturer or trader shall not be deemed to be
a bank within the meaning of this clause;
(v) “certificate of foreign insurance” means a certificate issued by a foreign insurer in Form 57
in compliance with these rules;
(vi) “foreign insurer” means a person or firm carrying on the business of insurance
incorporated or domiciled outside India and not registered under the Insurance Act, 1938
(4 of 1938);
(vii) “fund” means the fund established under rule 151;
(viii) “Government security” means a Government security as defined in the Public Debt Act,
1944 (18 of 1944);
(ix) “guarantor” means an insurer who has guaranteed a foreign insurer in pursuance of these
rules, and “guarantee”, “guaranteed” and “guaranteeing” have corresponding meanings;
(x) “visitor” means a person bringing a motor vehicle into India and making only a temporary
stay therein not extending to a continuous period of more than one year.
Inland Insurance
141. Certificate of insurance
An authorised insurer shall issue to every holder of a policy of insurance, a certificate of
insurance in Form 51 in respect of each such vehicle.
227
142. Cover notes
(1) Every cover note issued by an authorised insurer shall be in Form 52.
(2) A cover note referred to in sub-rule (1) shall be valid for a period of sixty-days from the date
of its issue and the insurer shall issue a policy of insurance before the date of expiry of the cover
note.
143. Issue of certificates and cover notes
Every certificate of insurance or cover note issued by an insurer in compliance with the
provisions of this Chapter shall be duly authenticated by such person as may be authorised by the
insurer.
144. Transfer of certificate of insurance
When the ownership of a motor vehicle covered by a valid insurance certificate is
transferred to another person together with the policy of insurance relating thereto the policy of
insurance of such vehicle shall automatically stand transferred to that other person from the date
of transfer of ownership of the vehicle and the said person shall within fourteen days of the date
of transfer intimate to the authorised insurer who has insured the vehicle, the details of the
registration of the vehicle, the date of transfer of the vehicle, the previous owner of the vehicle
and the number and date of the insurance policy so that the authorised insurer may make the
necessary changes in his record.
145. Exclusion of advertising matter
No certificate of the insurance or cover note issued in pursuance of Chapter XI of the Act
and of this Chapter shall contain any advertising matter either on the face or on the back thereof.
146. Certificates or cover notes lost, destroyed, torn, soiled, faced or mutilated
(1) Where the holder of a policy—
(a) lodges with an authorised insurer a declaration in which he declares that a certificate of
insurance or cover note issued to him by such insurer has been lost, destroyed, torn,
soiled, defaced or mutilated and sets out full particulars of the circumstances connected
with the loss or destruction of the certificate or cover note and the efforts made to find it;
or
(b) returns to the authorised insurer the certificate of insurance or cover note issued to him by
such insurer in a torn, soiled, defaced or mutilated condition; and
(c) pays to the insurer a fee of rupees twenty in respect of each such certificate or cover note,
the authorised insurer shall, if satisfied that such certificate or cover note has been lost or
destroyed and that all reasonable efforts have been made to find it, or that it has been
destroyed or is soiled, defaced or mutilated, as the case may be, issue in lieu thereof a
228
duplicate certificate of insurance or cover note with the word “Duplicate” prominently
endorsed to the effect.
(2) When a duplicate certificate or cover note has been issued in accordance with the provisions
of sub-rule (1) on representation that a certificate or cover note has been lost, and the original
certificate or cover note is afterwards found by the holder, the original certificate or cover note,
as the case may be, shall be surrendered to the insurer.
147. Records to be maintained by authorised insurers
Every authorised insurer shall keep a record of the following particulars in respect of
every policy of insurance issued by him for a period of five years, namely:—
(i) full name and address of the person to whom the policy is issued;
(ii) in the case of a policy relating to a specified motor vehicle, the registration mark and the
number of such vehicle and in other cases, description of the vehicle covered;
(iii) the date on which the policy of insurance comes into force and the date of its expiry;
(iv) the conditions subject to which the persons or classes of persons specified in the policy
of insurance will be indemnified;
(v) the number and date of issue of every certificate of insurance or cover note issued in
connection with the policy of insurance;
(vi) the date, if any, on which any duplicate certificate of insurance or cover note was issued;
(vii) whether, after the issue of duplicate, the original certificate of insurance was
found and subsequently surrendered to the insurer and if so, on which date.
148. Records of exempted vehicles
(1) In the case of a motor vehicle owned by any of the authorities specified in sub-section (2) of
section 146 as also in the case of motor vehicles exempted under sub-section (3) of section 146, a
certificate in Form 53 signed by a person authorised in that behalf by such authorities may be
produced in evidence that the motor vehicle is not being driven in contravention of section 146.
(2) The authority referred to in sub-section (2) or exempted under sub-section (3) of section 146
shall keep a record of the motor vehicles owned by it in respect of which a policy of insurance
has not been obtained and of any certificates issued by it under these provisions in respect of
such vehicles, and of the names and addresses of the persons to whom such certificates have
been issued and of the cancellation of any such certificates.
149. Supply of information
Any person, authority or authorised insurer required under the provisions of this Chapter to keep
records of documents shall furnish on request without any charge any particulars thereof to the
229
Central Government or a State Government or to any police officer authorised in this behalf by
the State Government.
150. Furnishing of copies of reports to Claims Tribunal
(1) The police report referred to in sub-section (6) of section 158 shall be in Form 54.
(3) A registering authority or a police officer who is required to furnish the required information
to the person eligible to claim compensation under section 160, shall furnish the information in
Form 54, within seven days from the date of receipt of the request and on payment of a fee of
rupees ten.
151. Establishment of fund
(1) Each of the authorities referred to in subsection (3) of section 146 shall establish a fund for
meeting any liability arising out of the use of any motor vehicle of that authority or any person in
its employment may incur to third parties including liability arising under the Workmen’s
Compensation Act, 1923 (8 of 1923).
152. Amount of the fund
(1) The fund shall be established with an initial amount of not less than rupees five lakhs and the
said amount shall be kept in deposit with a bank or the Government.
(2) Subject to the provisions of sub-rule (3), the authority shall pay into the fund at the beginning
of each accounting year in respect of its vehicles in running condition a sum of not less than
rupees two hundred per vehicle.
Explanation.—In this sub-rule “vehicles in running condition” means all the vehicles of the
authority which are expected to be in operation at any time during the accounting year.
(3) When the fund exceeds rupees twenty lakh or rupees two thousand arid five hundred per
vehicle for the entire fleet of vehicle, whichever is less, annual payment referred in sub-rule (2)
shall cease provided that if thereafter the amount at the credit of the fund falls below rupees
twenty lakhs or rupees two thousand and five hundred per vehicle for the entire fleet of vehicles,
whichever is less, such annual payment shall again be resumed:
Provided that if any authority other than the Central Government is of opinion that the
amount of rupees twenty lakhs or rupees two thousand and five hundred per vehicle for the entire
fleet of vehicles, whichever is less, is not adequate, it may, with the previous approval of the
Central Government continue the annual payment beyond rupees twenty lakhs or rupees two
thousand and five hundred per vehicle, as the case may be.
153. Investment of the fund
From the amount at the credit of the fund the authority shall keep and maintain a cash
deposit of not less than rupees fifty thousand in the bank and the rest of the amount at the credit
of the fund shall be invested in Government securities.
230
154. Securities held as a deposit in the fund
(1) All Government securities in which the fund is invested shall be transferred to the bank
by the authority.
(2) It shall be competent for the authority at any time to exchange the Government securities
for cash or for other Government securities of equal or greater market value, or both, and the
bank shall carry out the instructions issued by the authority for such exchange after charging the
usual commission to the authority. The securities so exchanged shall also be transferred to the
bank.
155. Deposit procedure
(1) As soon as the fund is established, the bank shall send to the authority a statement
specifying the assets held by it on behalf of the authority and shall also send a copy thereof to the
Central Government in the Ministry of Surface Transport or the State Government concerned, as
the case may be.
(2) The statement referred to in sub-rule (1) shall be sent in the same mariner and to the same
authorities whenever there is a change in the assets of the authorities held by the bank.
156. Interest on deposits
Interest realised on each deposit or the securities held in the fund shall be paid by the
bank to the authority.
157. Withdrawal
(1) No amount shall be withdrawn from the fund except for the purpose of meeting any
liability arising out the use of any motor vehicle of the authority which the authority or any
person in the employment of the authority may incur to third parties including liability arising
under the Workmen’s Compensation Act, 1923 (8 of 1923).
(2) The authority shall, subject to such conditions and restrictions as it may impose in this behalf,
authorise one of its officers to draw money from the fund for the purpose mentioned in sub-rule
(1).
(3) A copy of the authorisation referred to in sub-rule (2) duly authenticated by a competent
officer of the authority shall be sent to the bank which shall permit withdrawal only by the
officer named in such authorization subject to the conditions and restrictions contained therein.
158. Settlement of claims
The authority shall comply with such directions as the Central Government or the State
Government, as the case may be, may, from time to time issue, with respect to the procedure to
be followed for settlement of claims which are to be met out of the funds.
231
159. List of foreign insurers
(1) The Central Government shall publish in the Official Gazette a list (hereinafter referred
to as the approved list) of foreign insurers who have been guaranteed in accordance with the
provisions of this Chapter, together with the name of the guarantor or guarantors in each case
and shall also publish from time to time any addition to or removal from the approved list.
(2) No foreign insurer’s name shall be added to the approved list until such foreign insurer
has been guaranteed by at least one insurer and the name of the foreign insurer who ceases to
have at least one guarantor shall be removed from the list.
160. Guarantor of foreign insurer
(1) An insurer who desires to guarantee a foreign insurer shall make application therefore to
the Central Government in Form 55.
(2) The Central Government may, if it is satisfied that the application referred to in subrule
(1) is in order and that it is expedient that the foreign insurer be placed in the approved list or,
where the name of the foreign insurer is already included in the approved list, that the insurer
should be added to the approved list as guarantor of the foreign insurer, and the name of the
foreign insurer to the approved list if it is not already included, and include the insurer as a
guarantor of such foreign insurer.
(3) A guarantor desiring to cease guaranteeing a foreign insurer shall give notice of not less
than two months to the Central Government in Form 56, and where such notice has been given,
the guarantor shall be deemed to have ceased to guarantee the foreign insurer from the date
specified in the notice:
Provided that the insurer shall be deemed, in respect of all certificates of foreign
insurance endorsed or renewed in accordance with the provisions of sub-rule (2) of rule 161
before the date of such cessation, to continue as the guarantor of the foreign insurer who has
issued the certificate as if the guarantor had not ceased to be his guarantor.
(4) If at any time a guarantor ceases to be an insurer, the Central Government may, after
giving such notice as may appear to it to be necessary, remove from the approved list the name
of such guarantor wherever it appears:
Provided that the guarantor who ceases to be an insurer shall be deemed, in respect of all
certificates of foreign insurance endorsed in pursuance of the provisions of sub-rule (2) of rule
161 before the date of removal of the name of the guarantor from the approved list, to continue
as the guarantor of the foreign insurers as if the guarantor had not ceased to be an insurer and as
if his name had not been removed from the list.
161. Endorsement of certificate of foreign insurance
(1) A visitor wishing to have a certificate of foreign insurance endorsed or re-
endorsed shall produce such certificate in Form 57 before the Customs Collector at a port of
entry or land customs post or to such other officer as the Central Government may, by
232
notification in the Official Gazette appoint, for the purpose of endorsement in accordance with
the provisions of this Chapter or for the purpose of the renewal of any endorsement already made
on the certificate in accordance with this Chapter.
(2) Such officer shall, if satisfied that the certificate of foreign insurance complies
with the requirements of the provisions of this Chapter, that the period of validity of such
certificate in India has not expired, that the certificate has been issued by a foreign insurer in the
approved list and that the guarantor specified in the certificate is shown in the approved list as a
guarantor of the foreign insurer, make an endorsement thereon in Form 58.
(3) The period of validity of an endorsement or of the renewal of an endorsement
made as aforesaid shall not in any case extend beyond the date on which the certificate of foreign
insurance ceases to be effective in India:
Provided that when a visitor obtains a fresh certificate of foreign insurance during the
period of his stay in India, the period of validity of an endorsement made upon it added to the
period of validity of an endorsement or endorsements that may have been made upon the original
certificate, shall not exceed one year in all.
162. Validity of certificate of foreign insurance
A certificate of foreign insurance carrying an endorsement in accordance with the
provisions of rule 161 shall have effect as if it were a certificate of insurance issued by the
guarantor specified in it and shall be deemed to comply with the requirements of Chapter XI of
the Act; and the policy to which it relates shall also be deemed to have been issued by such
guarantor and to comply with the requirements of Chapter XI of the Act.
163. Maintenance of records by the guarantor
Every guarantor shall in respect of certificates of foreign insurance issued under his
guarantee by the foreign insurer whom he has guaranteed and every person who has ceased to be
a guarantor shall, in respect of the certificate of foreign insurance issued under his guarantee by
the foreign insurer whom he had guaranteed at any time in the preceding five years, keep a
record of such particulars relating to the policies in connection with which the certificates of
foreign insurance were issued as are required to be kept by insurers under the provisions of rule
147 in respect of policies, and the necessary additions to those records required to make them up
to date shall be made as soon as is reasonably possible in the circumstances.
Chapter VIII – Offences, Penalties and Procedure
164. Offences for the purpose of section 208-The offences for the purpose of subsection (1) of
section 208 shall be—
(a) Driving during the period of disqualification (section 23);
(b) Failure to stop the vehicle when it is involved in an accident (section 132);
233
(c) Obtaining or applying for a driving licence without giving particulars of endorsement
(section 182);
(d) Driving dangerously (section 184);
(e) Driving while under the influence of drinks or drugs (section 185);
(f) Abetment of an offence under section 184 or section 185 or section 188;
(g) Taking part in unauthorised race or trial of speed of any kind (section 189);
(h) Altering a driving licence or using an altered licence;
(i) Any other offence punishable with imprisonment in the commission of which a motor
vehicle was used.
234
FORM 1
[See Rule 5(2)]
APPLICATION-CUM-DECLARATION AS TO PHYSICAL FITNESS
1. Name of the applicant : ……………………………………………………………………………
2. Son/Wife/Daughter of : ……………………………………………………………………………
3. Permanent address : ……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
Temporary address
Official address (if any)
: ……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
5. (a) Date of birth
(b) Age on date of application
: …………………………………………………………………………..
6.Identification marks (1)
(2) :
………………………………………………………………………….
………………………………………………………………………….
………………………………………………………………………….
Declaration:
(a) Do you suffer from epilepsy or from sudden attacks of loss of consciousness or giddiness from any
cause? Yes/No
(b) Are you able to distinguish with each eye (or if you have held a driving licence to drive a motor
vehicle for a period of not less than five years and if you have lost the sight of one eye after the said
period of five years and if the application is for driving a light motor vehicle other than a transport
vehicle fitted with an outside mirror on the steering wheel side) or with one eye, at a distance of 25
metres in good day light (with glasses, if worn) a motor car number plate? Yes/No
(c) Have you lost either hand or foot or are you suffering from any defect of muscular power of either
arm or leg? Yes/No
(d) Can you readily distinguish the pigmentary colours, red and green? Yes/No
(e) Do you suffer from night blindness? Yes/No
(f) Are you so deaf so as to be unable to hear (and if the application is for driving a light motor vehicle,
with or without hearing aid) the ordinary sound signal? Yes/No
(g) Do you suffer from any other disease or disability likely to cause your driving of a motor vehicle
to be a source of danger to the public, if so, give details. Yes/No
I hereby declare that, to the best of my knowledge and belief, the particulars given above and the declaration
made therein are true.
(Signature or thumb impression of the Applicant)
Note: (1) An applicant who answers "Yes" to any of the questions (a), (c), (e), (f) and (g) or "No" to either of
the questions (b) and (s) should amplify his answers with full particulars, and may be required to
give further information relating thereto.
(2) This declaration is to be submitted invariably with medical certificate in Form 1 A.
235
FORM 1-A
[See Rules 5(1), (3), (7), 10(a), 14(d) and 18(d)]
MEDICAL CERTIFICATE
Space for
passport size
photograph
[To be filled in by a registered medical practitioner appointed for the purpose by the State Government or person
authorised in this behalf by the State Government referred to under sub-section (3) of Section 8.]
1. Name of the applicant : .........................................................................................................
2. Identification marks (1)
(2)
:
:
……………………………………………………………………..
……………………………………………………………………..
……………………………………………………………………..
……………………………………………………………………..
Declaration:
3. (a) Does the applicant, to the best of your judgment, suffer from any defect of vision? If so, has
it been corrected by suitable Spectacles?
Yes/No
(b) Can the applicant, to the best of your judgment, readily distinguish the pigmentary colours,
red and green?
Yes/No
(c) In your opinion, is he able to distinguish with his eyesight at a distance of 25 metres in good
day light a motor car number plate?
Yes/No
(d) In your opinion, does the applicant suffer from a degree of deafness which would prevent his
hearing the ordinary sound signals?
Yes/No
(e) In your opinion, does the applicant suffer from night blindness? Yes/No
(f) Has the applicant any defect or deformity or loss of member which would interfere with the
efficient performance of his duties as a driver? If so, give your reasons in detail.
Yes/No
(g) Optional
(a) Blood Group of the applicant (if the applicant so desires that the information may be noted
in his driving licence),
(b) RH factor of the applicant (if the applicant so desires that the information may be noted in
his driving licence).
Declaration made by the applicant in Form-1 as to his physical fitness is attached.
Space for
passport size
photograph
236
Certificate of Medical Fitness
I certify that:-
(i) I have personally examined the applicant Shri/Smt/Kum……………………………………………………..
(ii) that while examining the applicant I have directed special attention to his/her distant vision;
(iii) while examining the applicant, I have directed special attention to his/her hearing ability, the condition of the
arms, legs, hands and joints of both extremities of the applicant; and
(iv) I have personally examined the applicant for reaction time, side vision and glare recovery, (applicable in case of
persons applying for a licence to drive goods carriage carrying goods of dangerous or hazardous nature to human
life).
And, therefore, I certify that, to the best of my judgment, he is medically fit/not fit to hold a driving licence.
The applicant is not medically fit to hold a licence for the following reasons:-
Signature:
1. Name and designation of the Medical
Officer/Practitioner
(Seal)
2. Registration Number of Medical Officer
Date: ……………………………… Signature or thumb impression of the candidate
Note 1. - The medical officer shall affix his signature over the photograph affixed in such a manner that part of his
signature is upon the photograph and part on the certificate.]
2. Dumb persons without deafness may be granted a valid certificate of driving licence for non-transport vehicle.
237
FORM 2
[See Rule 10]
FORM OF APPLICANT FOR THE GRANT OF LEARNER'S LICENCE
To
The Licensing Authority,
………………………….
………………………….
Space for passport
size photograph
I hereby apply for a licence authorising me to drive as a learner, the following motor vehicle(s):-
(a) Motor cycle without gear
(b) Motor cycle with gear
(c) Invalid carriage
(d) Light Motor vehicle
(e) Transport vehicle
(f) Road roller
(g) Motor vehicle of a specified description, namely ………………………………………..
PARTICULARS TO BE FURNISHED BY APPLICANT
1. Full Name : ……………………………………………………………
2. Son/wife/daughter of : ……………………………………………………………
3. Permanent address
(Electoral Roll / Life Insurance Policy / Passport /
Pay slip issued by any office of the Central
Government/ State Government or a local body / Any
other document or documents as may be prescribed
by the State Government / Affidavit sworn before an
Executive Magistrate or a First Class Judicial
Magistrate or a Notary Public to be enclosed)
: …………………………………………………………….
…………………………………………………………….
…………………………………………………………….
…………………………………………………………….
4. Temporary address/ Official address, if any : ……………………………………………………………
…………………………………………………………….
…………………………………………………………….
5. Duration of stay at the present address : …………………………………………………………….
6. Date of birth
(Birth certificate / School certificate / Affidavit
sworn before an Executive Magistrate or a First
Class Judicial Magistrate or a Notary Public to be
enclosed)
: …………………………………………………………….
7. Place of birth : …………………………………………………………….
8. If place of birth outside India, when migrated to
India
: …………………………………………………………….
9. Educational Qualification : …………………………………………………………….
10. Identification mark(s) : 1……………………………………………………………
2……………………………………………………………
11. Omitted vide G.S.R 708(E) dated 30.08.2010
Space for
passport size
photograph
238
12. Blood group :
RH (Rhesus) factor :
13. I hold an effective driving licence to drive:
Motor cycle/light motor vehicle/transport
…………………………………………………………….
…………………………………………………………….
vehicle with effect from : …………………………………………………………….
14. Particulars of any driving licence previously
held by applicant. :
Whether it was cancelled and if so, for what
reason :
15. Particulars of any learner’s licence previously
held by applicant in respect of the description of
vehicle to which the applicant has applied.
…………………………………………………………….
……………………………………………………………..
16. Have you been disqualified for holding or
obtaining driving licence or learner’s licence. If
: …………………………………………………………….
so, for what reasons. : ……………………………………………………………..
17. I enclose three copies of my recent photograph
(passport size photograph) : …………………………………………………………….
18. I enclose medical fitness certificate dated……………….issued by…………………………………….(doctor).
19. I have submitted along with my earlier application for learner’s licence / I enclose the written consent of
parent/guardian (in the case of applicant being a minor).
20. I enclose driving certificate dated……………….issued by……………………………………………………….
……………………………………………………………………(Name and address of the driving school).
21. I have paid the fee of Rs…………………………………………………………………..
22. I am exempted from the medical test under Rule 6 of the Central Motor Vehicles Rules, 1989.
23. I am exempted from the preliminary test under Rule 11(2) of the Central Motor Vehicles Rules, 1989.
*Strike out whichever is inapplicable.
Date………………………………… Signature or thumb impression of Applicant
Specimen signatures or thumb impression of Applicant
1…………………………………………………….
2…………………………………………………….
239
Declaration under sub-section (2) of section 7 of the Motor Vehicles Act, 1988
Shri/Smt/Kumari.. …………………………….……………………………………………. Son / daughter of
………………………………….…………………… who is a minor is under my care and I accept responsibility for
his/her driving. If at a later date I decide not to accept responsibility for his/her driving I shall intimate the licensing
authority in writing for the cancellation of the licence. I give my consent for his/her obtaining learner’s licence.
Signature……………………………………………
Name and full address of the parent
/guardian…………………………………………….
………………………………………………………
………………………………………………………
Relationship………………………………………..
(To be signed in the presence of the licensing authority or person authorized in this behalf by the licensing
authority).
For office use
The applicant is exempted from the medical test under Rule 6 and the preliminary test under Rule 11(2) of the
Central Motor Vehicles Rules, 1989. Learner’s Licence may be issued.
The applicant was tested with reference to Rule 11(1) of the Central Motor Vehicles Rules, 1989. He has
passed the test. Learner’s Licence may be issued.
Learner’s Licence may be refused.
*Strike out whichever is inapplicable.
Signature of licensing authority or other person
authorised in this behalf.
Note.- The application along with the scanned copies of the required documents may also be sent to the concerned Licensing
Authority through Electronic Mail, if allowed by the concerned State Government / Union Territory Administration.
In such cases, the Licensing Authority shall scrutinise the application and intimate the applicant about the
acceptance/any discrepancy.
In case the application is accepted, the applicant shall be intimated through Electronic Mail to report to the Authority
concerned on an appointed date along with the documents for further verification, submission of application fee and examination
of the applicant.
240
FORM 3
[See Rules 3 (a) and 13]
LEARNER’S LICENCE
Licence No……………………………. Date……………………..
(Name to be written across the photograph)
Specimen signature / thumb impression
of the holder of the licence.
Space for
passport size
photograph
Signature and seal of
the licensing authority
1. Name : …………………………………………………………….
2. Son/Wife/Daughter of : …………………………………………………………….
3. Date of birth : …………………………………………………………….
4. Optional
Blood group
RH factor
: …………………………………………………………….
: …………………………………………………………….
5. Present / Permanent address : …………………………………………………………….
…………………………………………………………….
…………………………………………………………….
…………………………………………………………….
Temporary / Official (if any) : …………………………………………………………….
…………………………………………………………….
…………………………………………………………….
…………………………………………………………….
6. Mark (s) of identification (1)
(2)
: …………………………………………………………….
: …………………………………………………………….
is licensed to drive throughout India as a learner subject to the provisions of Rule 3 of the Central Motor
Vehicles Rules, 1989, a motor vehicle of the following description: -
………………………………………………………………………………………………………………
*The holder of the licence has passed the medical test under Rule 5 and the preliminary test
referred to in Rule 11(1) of the Central Motor Vehicles Rules, 1989.
*The holder of the licence is exempted from the medical test under Rule 6 and from preliminary
test under Rule 11(2) of the Central Motor Vehicles Rules, 1989.
This licence is valid from………………………. to ………………………….
*Strike out whichever is inapplicable.
Signature and designation of the
Licensing Authority
Warning. – The attention of the holder of this licence is drawn to Rule 3 of the Central Motor Vehicles Rules, 1989,
which prohibits him from driving any motor vehicle unless he has besides him a person duly licensed to drive the vehicle and in
every case, the vehicle carries “L” plates both in the front and in the rear of the vehicle.
241
http://www.keralamvd.gov.in/
FORM 4
[See Rule 14(1)]
FORM OF APPLICANT FOR LICENCE TO DRIVE A MOTOR VEHICLE
To
The Licensing Authority,
………………………….
………………………….
Space for passport
size photograph
I hereby apply for a licence to enable me to drive vehicles of the following description:-
(a) Motor cycle without gear
(b) Motor cycle with gear
(c) Invalid carriage
(d) Light Motor vehicle
(e) Transport vehicle
(f) Road roller
(g) Motor vehicle of the following description, namely …………………………………………………………….
PARTICULARS TO BE FURNISHED BY APPLICANT
1. Full Name : …………………………………………………………….
2. Son/wife/daughter of : …………………………………………………………….
3. Permanent address
(Electoral Roll / Life Insurance Policy / Passport /
Pay slip issued by any office of the Central
Government/ State Government or a local body / Any
other document or documents as may be prescribed
by the State Government / Affidavit sworn before an
Executive Magistrate or a First Class Judicial
Magistrate or a Notary Public to be enclosed)
: …………………………………………………………….
…………………………………………………………….
…………………………………………………………….
…………………………………………………………….
4. Temporary address/ Official address, if any : …………………………………………………………….
……………………………………………………………
…………………………………………………………….
5. Duration of stay at the present address : ……………………………………………………………
6. Date of birth
(Birth certificate / School certificate / Affidavit
sworn before an Executive Magistrate or a First
Class Judicial Magistrate or a Notary Public to be
enclosed)
: ……………………………………………………………
7. Place of birth : …………………………………………………………….
8. If place of birth outside India, when migrated to
India
: ……………………………………………………………
9. Educational Qualification : …………………………………………………………….
10. Identification mark(s) : 1…………………………………………………………..
2……………………………………………………………
11. [Omitted vide G.S.R 708 (E) dated 30.08.2010]
Space for
passport size
photograph
242
12. Blood group
RH (Rhesus) factor
: …………………………………………………………….
: ……………………………………………………………..
13. Have you previously held driving licence? If so,
give details.
: …………………………………………………………….
…………………………………………………………….
14. Particulars and date of every conviction which
has been ordered to be endorsed on any licence
held by the applicant.
15. Have you been disqualified for obtaining a
licence to drive? If so, for what reasons.
: …………………………………………………………….
……………………………………………………………
……………………………………………………………
: ……………………………………………………………..
…………………………………………………………….
……………………………………………………………
16. Have you been subjected to a driving test as to your fitness or ability to drive a vehicle in respect of which
licence to drive is applied for? If so, give the following details:-
Date of test Testing authority Result of test
1.
2.
3.
4.
17. I enclose three copies of my recent passport size photograph (where laminated card is used no photographs are
required).
18. I enclose the learner’s licence no…………………. dated …………………. issued by……………………………
19. I enclose driving certificate no…………………. dated…………. …..issued by………………………………….
20. I have submitted along with my application for learner’s licence / I enclose the written consent of
parent/guardian.
21. I have submitted along with the application for learner’s licence / I enclose the medical fitness certificate.
22. I am exempted from the medical test under Rule 6 of the Central Motor Vehicles Rules, 1989.
23. I am exempted from the preliminary test under Rule 11(2) of the Central Motor Vehicles Rules, 1989.
*Strike out whichever is inapplicable.
Date………………………………… Signature or thumb impression of Applicant
243
CERTIFICATE OF TEST OF COMPETENCE TO DRIVE
The applicant has passed the test prescribed under Rule 15 of the Central Motor Vehicles Rules, 1989. The
test was conducted on (here enter the registration mark and description of the
vehicle)……………………………………………………………………………. on (date)…………………………
The applicant has failed in the test.
(The details of the deficiency to be listed out)
Date:………………………. Signature of Testing Authority
………………………………..
………………………………..
Full name and designation
Two specimen signatures or thumb impression of Applicant
1…………………………………………………….
2…………………………………………………….
*Strike out whichever is inapplicable
Note.- The application along with the scanned copies of the required documents may also be sent to the concerned
Licensing Authority through Electronic Mail, if allowed by the concerned State Government / Union Territory Administration.
In such cases, the Licensing Authority shall scrutinise the application and intimate the applicant about the
acceptance/any discrepancy.
In case the application is accepted, the applicant shall be intimated through Electronic Mail to report to the Authority
concerned on an appointed date along with the documents for further verification, submission of application fee and examination
of the applicant.
244
FORM 4A
[See Rule 14(2)]
FORM OF APPLICATION FOR ISSUE OF INTERNATIONAL DRIVING PERMIT TO DRIVE
A MOTOR VEHICLE IN OTHER COUNTRIES
To
The Licensing Authority,
…………………………
…………………………
Space for
passport size
photograph
I apply for an International Driving Permit to enable me to drive vehicles of the following
categories:
CATEGORIES OF VEHICLES FOR WHICH PERMIT IS APPLIED FOR
(A) Motor Cycles Category L1 and Category L2;
(B) Motor vehicles, other than those in category (A) above, having a permissible maximum mass
/ weight not exceeding 3,500 KG (7700 lb) and not more than eight seats in addition to the
driver’s seat in Category M1;
(C) Motor vehicles used for the carriage of goods and whose permissible maximum mass / weight
exceeds 3,500 KG (7700 lb);
(D) Motor vehicles used for the carriage of passengers and having more than eight seats in
addition to the driver’s seat;
(E) Combination of vehicles of which the driving vehicle is in a category or categories for which
the driver is licensed (B and/or C and/or D), but which are not themselves in that category or
categories.
PARTICULARS TO BE FURNISHED BY APPLICANT
1. Name
…………………………………………………………………………
(Surname) (Middle name) (First name)
2. Father’s or Husband’s name
…………………………………………………………………………
3. Place of Birth and Country (Proof
to be enclosed)
………………………………………………………………………….
4. Address:
(a) Present
…………………………………………………………………………
…………………………………………………………………………
…………………………………………………………………………
………………………………………………………………………..
(b) Permanent
…………………………………………………………………………
…………………………………………………………………………
…………………………………………………………………………
………………………………………………………………………..
Space for
passport size
photograph
245
5. Date of birth (proof to
be enclosed)
…………………………………………………………………………
6. Educational Qualification
…………………………………………………………………………
7. Identification marks
(1)……………………………………………………………………..
(2)………………………………………………………………………
8. Blood group / RH factor
…………………………………………………………………………
9. Have you previously held
International Driving Permit? If so,
give details.
10. Particulars and date of every
conviction which has been ordered
to be endorsed on any driving
licence held by the applicant.
11. Have you been disqualified for
obtaining a driving licence to
drive? If so, for what reason?
12. Have you been subjected to a
driving test as to your fitness or
ability to drive a vehicle in respect
of which a driving licence is
applied for? If so, give the
following details:
(1)
(2)
(3)
(4)
Date of test Testing authority Result of test
13. I enclose three copies of my recent passport size photograph.
14. I enclose the copy of driving licence No……………………….. dated …………………………….. issued
by……………………………………………………………………. valid up to …………………………..
15. I enclose a medical certificate in Form 1A.
16. I have paid the fee of Rs…………………………………………
I hereby declare that the particulars given above are true to the best of my knowledge and belief.
Date:……………………….. Signature / Thumb impression of Applicant
246
FORM 5
[See Rules 14(e), 17(1) b, 27(d) and 31 A(2)]
DRIVING CERTIFICATE ISSUED BY DRIVING SCHOOL OR ESTABLISHMENTS
This is to certify that Shri./Smt./Kumari………………………………………………………
Son/Wife/Daughter of………………...……………………………………………………………..residing
at…………………………………………………………………………………………………………….. was
enrolled in this school on…………………………………………and his/her name is registered at serial
number…………………………………………in our register in Form 14 and that he/she has undergone the
course of training in driving of………………………………………………………………. (mention class of
vehicle) according to the syllabus prescribed for a period from………………………….
to……………………………………. satisfactorily.
I am satisfied with his/her physical fitness and sense of responsibility.
Signature………………………………………………….
Name and designation……………………………………
…………………………………………………………….
Name and address of the driving school with licence number
and date of issue.
…………………………………………………………….
…………………………………………………………….
…………………………………………………………….
247
FORM 6
[See rule 16 (1)]
(To be printed in book form of the size six centimetres by eight centimetres)
FORM OF DRIVING LICENCE
Name of the licence holder......................................................................................
Son/ wife/ daughter of .............................................................................................
Name to be written across the photograph (Part of the seal and signature of the licensing
authority to be on the photograph and part on the driving licence).
…………………………..
Specimen signature/thumb
impression of the holder of
the licence
……………………………..
Signature and designation of
the Licensing Authority
Driving licence number.......................................
Date of issue .......................................
Name .......................................
Son/wife/daughter of .......................................
Temporary address/official address (if any) .......................................
Permanent address .......................................
Date of birth .......................................
Educational qualifications .......................................
Optional Blood group .......................................
RH factor .......................................................]
The holder of this licence is licensed to drive throughout India vehicles of the following
description:--
Motor cycle without gear
Motor cycle with gear
Invalid carriage
Light motor vehicle
Passport size
photograph
248
Transport vehicle
Medium passenger motor vehicle
A motor vehicle of the following description :
The licence to drive a motor vehicle other than
transport vehicle is valid from.............................. to ...........................
The licence to drive transport vehicle is valid from............................ to ............... ......
Name and designation of the authority who
conducted the driving test
Signature and designation of the Licensing
Authority.
Authorisation to drive transport vehicle Number............................... Date...............................
Authorised to drive transport vehicle with effect from .............................Badge number..............................
Signature.....................................................
Designation of the Licensing Authority.
Name and designation of the authority who conducted the driving test.
Space for, addition of other classes of vehicles
Number............................... Date.............................
Also authorized to drive the following class or description of motor vehicles:
Name and designation of the authority who conducted the driving test.
Signature and designation of Licensing
Authority.
Date...............................
Space for renewal of driving licence
The licence to drive a motor vehicle other than transport vehicle is hereby renewed
From .......................... to ...............
Signature of Licensing Authority
The licence to drive transport vehicle is hereby renewed
From ...................... to ...........................
Signature of Licensing Authority
From ...................... to ...........................
Signature of Licensing Authority
249
From ...................... to ...........................
Signature of Licensing Authority
Space for endorsement by court
Date Section and Rule Fine or other Signature of the endorsing authority
(1)
(2)
punishment
(3)
(4)
Space for endorsement by licensing authority
Date Proceedings number and date Disqualification
From
period to Signature of Licensing
Authority
(1) (2) (3) (4)
250
FORM 6A
[See rule 16 (4)]
REPUBLIC OF INDIA
INTERNATIONAL MOTOR TRAFFIC
INTERNATIONAL DRIVING PERMIT
No..... .........................
Valid until.......................... (Maximum for 1 year or up to the date of validity of
driving licence whichever is earlier)
Name and Designation of Issuing Authority
Place of Issue
Date of Issue
Driving licence No. and valid upto
Seal of the Authority Signature of Issuing Authority
White colour
This permit is not valid for the territory of
(1)..................................................................................
The categories of vehicles for the driving of which it is valid are mentioned in this form at paragraph B.
(2) This permit shall in no way exempt the holder from the obligation to conform to the laws and
regulations relating to residence and the exercise of a profession in each State through which he travels. In
particular, it shall cease to be valid in a State if it holder establishes his normal residence there.
English and
French versions
A. PARTICULARS CONCERNING THE DRIVER
(1) Surname/First name/Middle Name/......................................................
(2) Father's or husband's Name....................................................................
(3) Place of Birth and Country......................................................................
(4) Date of Birth/approximate age...............................................................
(5) Address
(a) Current Address..................................................................................
(b) Permanent Address.............................................................................
(6) Blood Group/RH Factor..........................................................................
B. CATEGORIES OF VEHICLES FOR WHICH THE PERMIT IS VALID
(A) Motor Cycles Category L1 and Category L2;
251
(B) Motor vehicles, other than those in category (A) above, having a permissible maximum mass/weight
not exceeding 3,500 KG (7700 Ib) and not more than eight seats in addition to the driver's seat in
Category M1;
(C) Motor vehicles used for the carriage of goods and whose permissible maximum mass/weight exceeds
3,500 KG (7700 Ib);
(D) Motor vehicles used for the carriage of passengers and having more than eight seats in addition to the
driver's seat;
(E) Combination of vehicles of which the driving vehicle is in a category or categories for which the
driver is licensed (B and/or C and/or D), but which are not themselves in that category or categories.
Restrictive conditions of use such as:
Must wear corrective lenses.
Valid only for driving vehicle No.
Vehicle must be equipped to be driven by a one legged person.
Seal or Stamp of
the Authority below
in the appropriate
Column.
A
Photograph
35 x 45 MM
B
Seal or Stamp of the Authority
C
D
Signature or thumb print of holder
E
DISQUALIFICATIONS:--
The holder is deprived of the right to
drive in the territory of (Name of Until...............................................................
country) at................................
On..................................................................
Signature and seal or stamp of
the Authority which has
invalidated the permit in its
territory.
Until...... ....................................................
On.................................................................
The holder is deprived of the right to
drive in the territory of (Name of the
country) at...........................
Signature and seal or stamp of
the Authority which has
Photograph
35x45MM
252
invalidated the permit in its
territory."
DETAILS DU CHAUFFEUR
(1) Nom/Prenom/deuxieme nom ........................................................
(2) Nom du Pere ou de mari ........................................................
(3) Lieu de Naissance et Pays ........................................................
(4) Date de Naissance/l'age ........................................................
(5) Addresse ........................................................
(a) L'adresse en cours ........................................................
(b) L'adresse permanente ........................................................
(6) Groupe Sanguin/Facteur RH ........................................................
CATEGORIES DES VEHICULES POUR LESQUELLES LE PERMIS EST VALUABLE
(A) Motos (L1 et L2) Categories
(B) Vehicules sauf ceux de categories A, ayant la masse maximum acceptable ne depassant pas 3,500
Kilos (7700 Ib) et pas plus que huit sieges en plus dela siege du chauffeur. (M-1) categorie.
(C) Vehicules utilises pour porter les Marchandises et dont la Masse Maximum acceptable depasse 3,500
Kilos (7700 Ib)
(D) Vehicules utilises pour porter les voyageurs et ayant plus que huit sieges en plus de la siege du
chauffeur.
(E) Combination de vehicles dont le Vehicle a conduire est dans la categorie ou categories pour lesquels
le chauffeur est donee le permis (B et/ou C/ou D) mais lesquels ne sont pas dans cette/ces categorie(s).
Conditions restrictives d'usage comme
-- Doit porter des verres co-rectifs.
-- Valable seulement pour le numero de vehicle a conduire.
-- Vehicule doit etre muni pour conduire par une personne ayant une
jambe.
Sceau/Cachet
de l'autorite au-dessou,
dans l'espace approprie
A
Photograph 35
x 45
MM
B
253
Sceau ou cachet de 1'autorite
C
D
Signature ou Print du pouce
E
DISQUALIFICATIONS:--
Le detenteur est depossede du droit de
conduire dans le territoire (nom de
province) a................................................
jusqu'a.....................................................
le..............................................................
Signature et sceau de l'autorite qui a
invalide le permis dans son territoire.
Le detenteur est depossede du droit de
conduire dans le territoire (nom de
province) a................................................
jusqu'a.....................................................
le.......................................... ....................
Signature et sceau de l'autorite qui a
invalide le permis dans son
territoire.]
254
FORM 7
[See rule 16 (2)]
FORM FOR DRIVING LICENCE (LAMINATED/SMART CARD TYPE)
VISUAL INSPECTION ZONE
Driving licence No ..................................
Date of issue: ............................................
Valid Till (Non Transport) ............................. Valid Till (Transport)...........................
Name...................(Surname).........................(given name)...................... (middle name)
Son/Daughter/Wife of.............................................. (Surname).........................(given
name)...................... (middle name) Address (Current) ................................................
................................................. Date of Birth.............................. (date) .......................
(month) ................... (year)
Address (current)……………………………………………………………………………
Authorisation to drive the following vehicle class throughout India:--
(i) Class of vehicle ..................................................................................
(ii) Issue date (dd-mm-yyyy) ...................................................................
Badge Number .................................................................................................
Blood Group and Rh Factor of the Driver ...........................................................
Specimen Signature/thumb impression of the licence holder ...................................
Signature of the Issuing Authority ......................................................................
Identification of Issuing Authority .......................................................................
Note.--The provision for security features like the ghost image and/or the hologram would be
provided in the Visual Inspection Zone of the Licence by the concerned State Government. Card
Serial Number will be printed by card manufacturer on the back side upper left corner of the
card.
MACHINE READABLE ZONE
The concerned State Governments will provide the following features in the licence, in Machine
Readable Zone:--
Chip Serial Number .............................................
Photograph
255
Driving Licence No. .............................................
Date of Issue .......................................................
Valid Till (Non Transport) ............................. Valid Till (Transport) ..........................
Name...................(Surname).........................(given name)...................... (middle name)
Son/Daughter/Wife of.............................................. (Surname) ......................... (given
name)...................... (middle name)
Citizenship ………………………………………………
Date of Birth (dd-mm-yyyy) ..................................................................................
Class of vehicle ...................................................................................................
Respective date of issue .......................................................................................
Short name of the Authority Conducted Driving Test for Respective Class of Vehicle as above
Designation of the Authority Conducting Driving Test for Respective Class of Vehicle as above
Identification of Issuing Authority.........................................................................
Endorsement Details (Provision will be made to accommodate the details of 10
Endorsements with following details)
Endorsement/Challan Number ...................................................................
Endorsement/Challan Date .......................................................................
ID Code of Authority of Endorsement .........................................................
Section/Rule/Proceeding No. (Provision for 10 Sections/Rules) .......................
Fine ......................................................................................................
Disqualification period from (dd-mm-yyyy)...............................................
Disqualification period to (dd-mm-yyyy)....................................................
Settlement/Review Date (dd-mm-yyyy)......................................................
Settlement/Review Authority ID ................................................................
Badge Details
Badge Number ......................................................................................
Valid Till ..............................................................................................
Authorisation Number ............................................................................
Authorisation Date ..............................
256
FORM 8
[See Rule 17(1)]
APPLICATION FOR THE ADDITION OF A NEW CLASS OF VEHICLE TO A DRIVING LICENCE
To
The Licensing Authority,
…………………………
…………………………
I, Shri. / Smt. / Kumari ……………………………………………………….. hereby apply for the
addition of the following class / classes of motor vehicles to the attached licence:-
(a) Motor cycle without gear,
(b) Motor cycle with gear,
(c) Invalid carriages,
(d) Light motor vehicles,
(e) Transport vehicles,
(f) Medium passenger vehicles,
[***]]
(i) Road rollers,
(j) Motor vehicle of the following description………………………………………….
I enclose,
(a) a medical certificate in Form 1A,
(b) Learner’s licence in Form 3,
(c) Driving licence in Form 6/7,
(d) Driving certificate in Form 5 if the applicant is to drive a transport vehicle.
I have paid the fee of Rs…………………………………………
Dated:…………………. Signature or thumb impression of the Applicant
Certificate of test of competence to drive
The applicant has passed / failed in the test specified in Rule 15 of the Central Motor Vehicles Rules,
1989. The test was conducted on a……………………………………………………………. (here enter
description of vehicle) on date ……………………………………
Signature of Testing Authority
Name and designation
257
(a) Number : …………………………………………………………………………
(b) Date of issue : …………………………………………………………………………
(c) Licensing authority by which the
licence was issued
:
………………………………………………………………………..
(d) Licensing authority by which the
licence was last renewed
:
………………………………………………………………………..
(e) Class of vehicles authorized to be
driven
: ………………………………………………………………………..
(f) Date of expiry of licence to drive
(i) Transport vehicle
(ii) Vehicles other than transport
vehicles
:
:
…………………………………………………………………………
…………………………………………………………………………
My present address is : …………………………………………………………………………
…………………………………………………………………………
………………………………………………………………………….
FORM 9
[See Rule 18(1)]
FORM OF APPLICATION FOR THE RENEWAL OF DRIVING LICENCE
Space for
passport size
photograph
I, Shri./Smt./Kumari………………………………………………………….………………………..……….
Son/Wife/Daughter of………………………………………………………….. hereby apply for the renewal of my
driving licence which is attached and particulars of which are as follows:
If this address is not entered on the licence, I do / do not wish that it should be so entered.
If the licence is not attached, reasons why it is not available?
………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………….
If the licence was not renewed within thirty days of the date of expiry, reasons for delay
………………………………………………………………………………………………………………………….
The renewal of licence has not been refused by any licensing authority.
I have not been disqualified for holding or obtaining a driving licence. My licence has not been revoked.
I enclose a medical fitness certificate in Form 1A.
I enclose three copies of my recent photograph (5 cms. by 6 cms.)
I have paid the fee of Rs…………………………………………..
I hereby declare that to the best of my knowledge and belief the particulars given above are true.
Date:……………………… Signature and thumb impression of Applicant
Name ……………..……………………………...…………
Address……………………………………………………...
……………………………...................................................
Space for
passport
size
photograph
258
FORM 10
[See rule 23 (1)]
STATE REGISTER OF DRIVING LICENCES
1. (a) Driving licence number and date of initial issue .....................................
(b) Licensing authority which issued the licence ......................................
(c) Name and designation of the officer who has taken the driving test and the date of passing the
test by the holder of the licence ......................................
2. Name, address and other particulars of the holder of the driving licence:
(a) Name of the holder (with guardian's name, if minor) ......................................
(b) Date of birth ......................................
(c) Educational Qualifications ......................................
(d) Permanent Address ......................................
(e) Temporary address/official address (if any) ...................................
(f) Subsequent changes of address ...................................
(g) Class and types of vehicles for which licence is given ...................................
(h) Addition of vehicles (if any) with dates, ...................................
(i) Date of expiry of the licence and further renewal (with details of licensing authority which
renewed the licence) ...................................
(j) Details of disqualifications, fine, cancellation, etc. in relation to the holder of the driving
licence ...................................
259
FORM 11
[See rules 24 (1), 24 (4) and 25]
FORM OF LICENCE FOR THE ESTABLISHMENT OF A MOTOR DRIVING SCHOOL
Licence No......................................
Licence is hereby granted for the establishment of a school for imparting instructions in driving of motor
vehicles specified below:
(a) Motor cycle,
(b) Invalid carriage,
(c) Light motor vehicle,
(d) Medium goods vehicle,
(e) Medium passenger motor vehicle,
(f) Heavy goods vehicle,
(g) Heavy passenger motor vehicle,
(h) Motor vehicles of the following description:
by............................................... (Name and address of the licence holder) at.................
....................................... ........................ ................................ ........... (premises of the school) the school
being known as the........................................... subject to the provisions of the Motor Vehicles Act, 1988,
and the Central Motor Vehicles Rules, 1989.
The licence is valid from......................................... to...........................................
Dated...........................................
Licensing Authority
This licence is hereby renewed from..................................... to...............................
Licensing Authority
260
FORM 12
[See Rule 24(2)]
FORM OF APPLICATION FOR A LICENCE TO ENGAGE IN THE BUSINESS OF
IMPARTING INSTRUCTIONS IN DRIVING OF MOTOR VEHICLES
To
The Regional Transport Officer,
…………………………………
…………………………………
The undersigned hereby applies for obtaining a licence to run the business of imparting instructions in
driving of motor vehicles:
1. Full name of the applicant : ………………………………………………………….
2. Son/Wife/Daughter of : ………………………………………………………….
3. Address : ………………………………………………………….
………………………………………………………….
………………………………………………………….
………………………………………………………….
4. Place where the applicant desires to start
his business
: ………………………………………………………….
………………………………………………………….
………………………………………………………….
………………………………………………………….
5. Nature and extend of facilities available : ………………………………………………………….
………………………………………………………….
…………………………………………………………
6. Qualification of staff engaged for
imparting instructions
7. Make and model of engines to be used for
training purposes
8. Details of the registration marks of the
vehicles used for imparting driving
instruction
: ……………………………………………………………
…………………………………………………………..
………………………………………………………….
: …………………………………………………………..
………………………………………………………….
………………………………………………………….
: ………………………………………………………….
………………………………………………………….
…………………………………………………………
9. I have paid the fee of Rs. : ………………………………………………………….
Dated……………………………….. Signature of the Applicant
261
FORM 13
[See Rules 24(2) and 25]
FORM OF APPLICATION FOR RENEWING A LICENCE TO ENGAGE IN THE BUSINESS
OF IMPARTING INSTRUCTIONS IN DRIVING OF MOTOR VEHICLES
To
The Regional Transport Officer,
…………………………………
………………………………….
The undersigned hereby applies for renewal of a licence to run the business of imparting
instructions in driving of motor vehicles:
1. Full name of the applicant : ………………………………………………………….
2. Son/Wife/Daughter of : ………………………………………………………….
3. Address : ………………………………………………………….
………………………………………………………….
………………………………………………………….
………………………………………………………….
4. Place of business : ………………………………………………………….
………………………………………………………….
………………………………………………………….
………………………………………………………….
5. Number of existing licences : ………………………………………………………….
6. Date of issue : ……………………………………………………………
…………………………………………………………..
………………………………………………………….
7. Period of validity : …………………………………………………………..
8. Whether the application has been made
before the expiry of existing licence, if
not, the reasons for delay
: ………………………………………………………….
………………………………………………………….
…………………………………………………………
9. Whether the earlier licence was suspended
/ cancelled for any reason, details thereof
such as date of suspension, reasons for
such suspension / cancellation. Date of
revocation of suspension / cancellation
: ………………………………………………………….
………………………………………………………….
…………………………………………………………..
10. I have paid the fee of Rs. : ………………………………………………………….
Dated………………………………..
Signature of the Applicant
262
FORM 14
[See Rule 27(a)]
REGISTER SHOWING THE ENROLMENT OF TRAINEE(S) IN THE
DRIVING SCHOOL ESTABLISHMENTS
Register for the year………………………………………
1. Enrolment number : ……………………………………………………………….
2. Name of the trainee with his
photograph
: ………………………………………………………………..
3. Son / Wife / Daughter of
:
………………………………………………………………..
4. Address:
(a) Permanent address
(b) Temporary address / Official
address (if any)
:
:
………………………………………………………………..
……………………………………………………………….
………………………………………………………………...
……………………………………………………………….
………………………………………………………………..
………………………………………………………………..
…………………………………………………………………
………………………………………………………………..
5. Date of birth : ………………………………………………………………..
6. Class of vehicle for which training
imparted
: …………………………………………………………………
…………………………………………………………………
7. Date of enrolment : ………………………………………………………………..
8. Learner’s licence number and date
of its expiry
: ………………………………………………………………..
9. Date of completion of the course : ………………………………………………………………..
10. Date of passing the test of
competence to drive
: ………………………………………………………………..
11. Driving licence number and date of
issue and the licensing authority
which issued the licence
: ………………………………………………………………..
………………………………………………………………..
12. Remarks : ………………………………………………………………..
13. Signature of licence holder /
instructor
: …………………………………………………………………
………………………………………………………………..
263
FORM 15
[See Rule 27(i)]
REGISTER SHOWING THE DRIVING HOURS SPENT BY A TRAINEE
Name of the school / establishment : ……………………………………………………………
Name of the trainee
:
……………………………………………………………
Enrolment number
:
……………………………………………………………
Date of enrolment
:
……………………………………………………………
Date Hours spent in
actual driving
Class of vehicle Signature of the
instructor
Signature or thumb
impression of the trainee
1 2 3 4 5
1.
2.
3.
4.
5.
264
FORM 16
[See Rule 34(1)]
FORM OF APPLICATION FOR GRANT OR RENEWAL OF TRADE CERTIFICATE
To
The Registering Authority,
…………………………….
…………………………….
I/We hereby apply for issue of / renewal of a trade certificate(s):
1. Applicant’s name : ………………………………………………………………….
2. Son / Wife / Daughter of : ………………………………………………………………….
3. Applicant’s full address (proof to
be attached)
: …………………………………………………………………..
………………………………………………………………….
………………………………………………………………….
…………………………………………………………………
4. Whether the applicant is a
manufacturer or dealer in motor
vehicles, approved repairer of
vehicles, engaged in building
bodies to vehicles, engaged in the
business of hire purchase / lease /
hypothecation of vehicles
: …………………………………………………………………
…………………………………………………………………
…………………………………………………………………
………………………………………………………………….
………………………………………………………………….
5. Number of certificates required : ………………………………………………………………….
6. Class of motor vehicle(s) in respect
of which each certificate(s) is
required
: …………………………………………………………………..
…………………………………………………………………..
7. Amount of fee paid : ………………………………………………………………….
8. If the application is for renewal,
indicate the trade certificate No.,
date of issue and date of expiry in
respect of which renewal is
applicable
: ………………………………………………………………….
………………………………………………………………….
…………………………………………………………………..
Declaration
I/We do hereby declare that the trade certificate(s) is / are required by me / us for bona fide trade
purpose.
Place………………………………………….
Date………………………………………….. Signature of the Applicant
265
FORM 17
[See rule 35 (1)]
FORM OF TRADE CERTIFICATE
(To be printed in diameter shape of 70 millimetres)
Trade Certificate
1. Serial number of certificate .............................................. ............... ....................
2. Full name and address of certificate holder .............................................. ...............
3. Trade number assigned in respect of the certificate ............................................. ....
4. Class of motor vehicle in respect of which the certificate is to be used .........................
5. Date of expiry of certificate .............................................. ............... ....................
6. Amount of fee paid .............................................. ............... ............... ........... ...
7. Date and stamp of office of issue .............................................. ............... ............
Station...................................
Date.......................................
Registering Authority of Region/State
Valid throughout India
SCHEDULE
Form of folder for the certificate
The folder shall be of metal and be weather-proof. It shall be circular in shape and conform to the
following dimensions:--
Circular pattern, without cross bars--certificate tray
The certificate of standard pattern when cut along the outline of the outer of that two
circles, shall fit neatly into a sheet-metal tray of suitable thickness, having a turned-up
edge of sufficient depth to hold the licence and stout cover of transparent white glass.
Ring cover : A circular ring of sheet-metal shaped to fit down closely into the tray, and
adopted for fixing by screws, bolts, or otherwise to the vehicle in the prescribed position.
A rubber packing ring shall be arranged to fit between the ring cover and the cover glass
and tray so as to render the whole carrier weather-proof.
Dimensions : The aperture within the ring-cover shall clearly exhibit the whole of the
certificate lying within the inner circle of the certificate and shall have a diameter of 10
cm.
266
FORM 18
[See Rule 38(1)]
INTIMATION OF LOSS OR DESTRUCTION OF A TRADE CERTIFICATE AND
APPLICATION FOR DUPLICATE
To
The Registering Authority,
…………………………….
…………………………….
The trade certificate issued to me / us bearing number………………………………………. and
valid up to…………………………………..has been mutilated / soiled / lost / destroyed in the following
circumstances and is not in my possession for the reasons specified below:-
I/We surrender the mutilated / soiled trade certificate.
I/We hereby declare that to my / our knowledge the trade certificate has not been either
suspended or cancelled under the provisions of the rules and that the above certificate is not in the use of
any one else. I undertake to surrender the trade certificate if it is found by me or restored to me.
I/We hereby deposit the fee of Rs……………………………….. and apply for the issue of
duplicate trade certificate.
Dated………………………….. Signature or thumb impression of the Applicant
Address…………………………………………
………………………………………………….
………………………………………………….
………………………………………………….
267
FORM 19
[See Rule 43]
REGISTER TO BE MAINTAINED BY THE HOLDER OF TRADE CERTIFICATE
Date Trade certificate
number and in
case of vehicle
registered, the
registration
number of the
vehicle
Description of
motor vehicle
Purpose for
which vehicle
sent out or
brought
Driver’s name,
licence no. and
address and
whether he is
the employee of
the holder of
trade certificate
Hours of
leaving the
premises by
the vehicle
Hours of
return to
premises by
the vehicle
Mileage
covered
between the
hours noted
in columns
(6) and (7)
Signature and
designation
of the person
authorized by
the holder
(1) (2) (3) (4) (5) (6) (7) (8) (9)
268
FORM 20
[See Rule 47]
APPLICATION FOR REGISTRATION OF A MOTOR VEHICLE
(To be made in duplicate if the vehicle is held under an agreement of Hire-Purchase/Lease/Hypothecation and
duplicate copy with the endorsement of the Registering Authority to be returned to the Financier simultaneously on
Registration of motor vehicle)
To
The Registering Authority,
………………………………
1. Full name of person to be registered as
Registered owner
: ………………………………………………………………
Son / Wife / Daughter of : ………………………………………………………………
2. Age of person to be registered as
Registered owner
3. Permanent address
(Electoral Roll / Life Insurance Policy /
Passport / Pay Slip issued by any office of the
Central Government/State Government or a
local body/Any other document or documents
as may be prescribed by the State
Government/Affidavit sworn before an
Executive Magistrate or a First Class Judicial
Magistrate or a Notary Public to be enclosed)
: ………………………………………………………………
: ………………………………………………………………
……………………………………………………………….
……………………………………………………………….
………………………………………………………………
………………………………………………………………
4. Temporary address/Official address, if any : ………………………………………………………………
……………………………………………………………….
……………………………………………………………….
………………………………………………………………
5. Duration of stay at the present address : ……………………………………………………………….
6. PAN Number (Optional) : ……………………………………………………………….
7. Place of birth : ………………………………………………………………
8. If place of birth is outside India, when
migrated to India
9. [Omitted vide G.S.R 708(E) dated
30.08.2010
10. Name and address of the Dealer or
Manufacturer from whom the vehicle was
purchased (sale certificate and certificate of
road worthiness issued by the manufacturer to
be enclosed)
11. If ex-army vehicle or imported vehicle,
enclose proof. If locally manufactured
Trailer/Semi-Trailer, enclose the approval
of design by the State Transport Authority
: ……………………………………………………………….
: ………………………………………………………………
………………………………………………………………
………………………………………………………………
: ………………………………………………………………
………………………………………………………………
………………………………………………………………
269
and note the proceedings number and date
of approval.
12. Class of vehicle
(If motor cycle, whether with or without gear)
: ………………………………………………………………
13. The motor vehicle is
(a) a new vehicle,
(b) ex-army vehicle,
(c) imported vehicle
: ………………………………………………………………
: ………………………………………………………………
: ………………………………………………………………
14. Type of body : ……………………………………………………………….
15. Type of vehicle : ……………………………………………………………….
16. Maker’s name : ……………………………………………………………….
17. Month and year of manufacture : ……………………………………………………………….
18. Number of cylinders : ………………………………………………………………
19. Horse power : ………………………………………………………………
20. Cubic capacity : ……………………………………………………………….
21. Maker’s classification or if not known,
wheel base
: ………………………………………………………………
22. Chassis No. (Affix pencil print) : ………………………………………………………………
23. Engine Number or Motor Number in case
of Battery Operated Vehicles
: ………………………………………………………………
24. Seating capacity (including driver) : ………………………………………………………………
25. Fuel used in the engine : ………………………………………………………………
26. Unladen weight : ……………………………………………………………….
27. Particulars of previous registration and
registered number (if any)
28. Colour or colours of body and wings and
front end
: ……………………………………………………………….
: ………………………………………………………………
I hereby declare that the motor vehicle has not been registered in any State in India.
ADDITIONAL PARTICULARS TO BE COMPLETED ONLY IN THE CASE OF TRANSPORT VEHICLES
OTHER THAN MOTOR CAB
29. Number, description, size and ply rating of
tyres, as declared by the manufacturer
(a) Front axle
(b) Rear axle
(c) Any other axle
(d) Tandem axle
30. Gross vehicle weight
(a) As certified by manufacturer
(b) To be registered
31. Maximum axle weight
(a) Front axle
(b) Rear axle
= ……………………………………………………….
= …………………………………………………….…
= ……………………………………………………….
= ……………………………………………………….
: ………………………………………………………..Kgms
: ………………………………………………………..Kgms
= ………………………………………………………..Kgms
= ………………………………..………………………Kgms
270
(c) Any other axle
(d) Tandem axle
32. (a) Overall length
(b) Overall width
(c) Overall height
(d) Over hang
= ………………………………………………………..Kgms
= ………………………………………………………..Kgms
: ………………………………………………………………
: ………………………………………………………………
: ………………………………………………………………
: ………………………………………………………………
The above particulars are to be filled in for a rigid frame motor vehicle of two or more axles for an articulated
vehicle of three or more axles or, to the extent applicable, for trailer, where a second semi-trailer or additional
semi-trailer are to be registered with an articulated motor vehicle. The following particulars are to be furnished
for each such semi-trailer.
33. Type of body : ………………………………………………………………
34. Unladen weight : ……………………………………………………………….
35. Number, description and size of tyres on
each axle
36. Maximum axle weight in respect of each
axle
37. The vehicle is covered by a valid certificate
of Insurance under Chapter XI of the Act
: ………………………………………………………………
………………………………………………………………
: ……………………………………………………………….
: Insurance Certificate or Cover Note No……………………..
dated…………………………. of…………………………...
………………………………. (Name of company) valid
from…………………………to……………………………
38. The vehicle is exempted from insurance.
The relevant order is enclosed.
: ……………………………………………………………….
39. I have paid the prescribed fee of Rs. : ……………………………………………………………..
Date……………………………… Signature or thumb impression of the person to be registered
as registered owner.
Note.- The motor vehicle above described is –
(i) Subject to Hire-purchase agreement/lease agreement with…………………………………………
……………………………………………………………………………………………………….
(ii) Subject to Hypothecation in favour of……………………………………………………………...
……………..………………………………………………………………………………………..
(iii) Not held under Hire-purchase agreement, or lease agreement or subject to Hypothecation.
Strike out whatever is inapplicable. If the vehicle is subject to any such agreement the signature of the
Financier with whom such agreement has been entered into is to be obtained.
…………………………………………… ………………………………………….
Signature of the financier with whom an Agreement Signature or thumb impression of the
of Hire-purchase, Lease or Hypothecation has been registered owner
entered into
271
CERTIFICATE OF INSPECTION OF MOTOR VEHICLE
Certified that the particulars contained in the application are true and that the vehicle complies
with the requirements of the Motor Vehicles Act, 1988, and the Rules made thereunder.
Date…………………………….
Ref.No…………………………
Signature of the Inspecting Authority
Name………………………………………….
Designation……………………………………
OFFICE ENDORSEMENT
Office of the………………………………..
The above said motor vehicle has been assigned the Registration number………………………………….
and registered in the name of the applicant and the vehicle is subject to an agreement of Hire-purchase/
Lease/ Hypothecation with the Financier referred above.
Date………………………….. Signature of the Registering Authority
To
The Financier………………………………………………………………………………………..
………………………………………………………………………………………………………………..
(To be sent by Registered Post Acknowledgment Due)
Specimen signature or thumb-impression of the person to be registered as Registered Owner and Financier
are to be obtained in original application for affixing and attestation by Registering Authority with office seal in
Forms 23 and 24 in such a manner that the part of impression of seal or a stamp and attestation shall fall upon each
signature.
Specimen signature of the Financier
(1)……………………………………………………..
(2)……………………………………………………...
Specimen signature of the Registered Owner
(1)………………………………………………………
(2)………………………………………………………
272
FORM 21
[See Rule 47(a) and (d)]
SALE CERTIFICATE
(To be issued by manufacturer/ dealer or officer of Defence Department (in case of military auctioned vehicles) for presentation along
with the application for registration of a motor vehicle)
Certified that……………………………………………………………………(brand name of the vehicle)
has been delivered by us to……………………………………………………… on………………...(date).
Name of the buyer : ……………………………………………………………….
Son/Wife/Daughter of : ……………………………………………………………….
Address (Permanent)
(Temporary)
:
:
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
The vehicle is held under agreement of hire-purchase/lease/hypothecation with…………………………………………..
………………………………………………………………………………………………………………………………
The details of the vehicle are given below:
1. Class of vehicle : ………………………………………………………………
2. Maker’s name : ………………………………………………………………
3. Chassis No. : ……………………………………………………………….
4. Engine number or motor number in the case of
Battery Operated Vehicles
: ………………………………………………………………..
5. Horse power or cubic capacity : ……………………………………………………………..
6. Fuel used : ………………………………………………………………
7. Number of cylinders : ……………………………………………………………….
8. Month and year of manufacture : ……………………………………………………………….
9. Seating capacity (including driver) : ……………………………………………………………….
10. Unladen weight : ……………………………………………………………….
11. Maximum axle weight and number and
description of tyres (in case of transport vehicle)
(a) Front axle
(b) Rear axle
(c) Any other axle
(d) Tandem axle
:
:
:
:
………………………………………………………………
………………………………………………………………
……………………………………………………………….
……………………………………………………………….
12. Colour or colours of the body : ………………………………………………………………
13. Gross vehicle weight : ……………………………………………………………….
14. Type of body : ………………………………………………………………
Signature of the manufacturer / dealer or Officer of Defence
Department
Strike out whichever is inapplicable
273
FORM 22
[See Rules 47(g), 115, 124(2), 126A and 127(1), 127(2)]
INITIAL CERTIFICATE OF COMPLIANCE WITH POLLUTION STANDARDS, SAFETY
STANDARDS OF COMPONENTS AND ROAD-WORTHINESS
(To be issued by the manufacturer)
Certified that the following vehicle complies with the provisions of the Motor Vehicles Act,
1988, and the rules made thereunder, including the following mass emission norms:
Brand name of the vehicle : ………………………………………………………….
Chassis number : ………………………………………………………….
Engine number/ motor number (in
case of battery operated vehicles)
Sub-rule No…………………. of
rule 115
Emission norms
[Bharat Stage-I/II/III/Bharat
(Trem) Stage-III etc.]
: ………………………………………………………….
: …………………………………………………………..
: …………………………………………………………..
Signature of manufacturer
Form 22 shall be issued with the signature of the manufacturer duly printed in the Form itself by
affixing facsimile signature in ink under the hand and seal of the manufacturer.
274
FORM 22A
[See Rules 47(g), 115, 124(2), 126A and 127(1), 127(2)]
INITIAL CERTIFICATE OF COMPLIANCE WITH POLLUTION STANDARDS, SAFETY
STANDARDS OF COMPONENTS AND ROAD-WORTHINESS
(FOR VEHICLES WHERE BODY IS FABRICATED SEPARATELY)
PART I
(To be issued by the manufacturer)
Certified that the following vehicle complies with the provisions of the Motor Vehicles Act,
1988, and the rules made thereunder, including the following mass emission norms:
Brand name of the vehicle : ………………………………………………………….
Chassis number : ………………………………………………………….
Engine number/ motor number (in
case of battery operated vehicles)
Sub-rule No…………………. of
rule 115
Emission norms
[Bharat Stage-I/II/III/ etc.]
: ………………………………………………………….
: …………………………………………………………..
: …………………………………………………………..
Signature of chassis manufacturer
Form 22A, Part-I shall be issued with the signature of the manufacturer duly printed in the Form
itself by affixing facsimile signature in ink under the hand and seal of the manufacturer.
PART-II
(To be issued by the body builder)
Certified that body of the vehicle…………………….…………………….(brand name of the
vehicle) bearing chassis number……………………………………… and engine
number…………………………………. has been fabricated by us and the same complies with the
provisions of the Motor Vehicles Act, 1988, and the rules made thereunder.
Signature of Body Builder
Form 22A, Part-II shall be issued with the signature of the body builder duly printed in the Form
itself by affixing facsimile signature in ink under the hand and seal of the manufacturer.
275
FORM 23
(See rule 48)
CERTIFICATE OF REGISTRATION
Registration Number.....................................
Brief description of vehicle........................................................................(e.g.
Fiat/Ambassador/Maruti car, Tata, Ashok Leyland goods vehicle, trailer, motor cycle
with/without gear, motor cycle with side car, etc.)
Purchased from the Dealer Name & Address :........................................................
Name of Registered Owner .....................................................................
Son/wife/daughter of .....................................................................
Full address (Permanent) .....................................................................
Full address (Temporary)
PAN Number (optional)..................... .....................................................................
Signature of Registering Authority ...................
Date............................................................
Specimen Signature of the Registered Owner to be
affixed and attested by Registering Authority with his seal
DETAILED DESCRIPTION
1. Class of vehicle ..........................
The motor vehicle is ..........................
(a) a new vehicle ..........................
(b) ex-army vehicle ..........................
(c) imported vehicle ..........................
(d) Migration from other States ..........................
2. Maker's name ..........................
Dealer's name and address ..........................
3. Type of body ..........................
4. Month and year of manufacture ..........................
5. Number of cylinders ..........................
6. Chassis Number ..........................
7. Engine number or motor number in the case of Battery
Operated Vehicles ..........................
8. Fuel used in the engine ..........................
276
9. Horse Power (B.H.P.) ..........................
10. Cubic Capacity ..........................
11. Maker's Classification ..........................
12. Wheel base ..........................
13. Seating capacity (including driver) ..........................
14. Unladen weight ..........................
15. Colour or colours of body, wings and front end ..........................
Additional particulars in the case of all transport vehicles other than motor cabs.
16. Gross vehicle weight
(a) as certified by the manufacturer ..................................... kgms.
(b) as registered ..................................... kgms.
17. Number, description, size and ply rating of tyres, as
declared by the manufacturer]
(a) Front axle ..........................
(b) Rear axle ..........................
(c) Any other axle ..........................
(d) Tandem axle ..........................
18. Registered axle weight ......................................kgms.
(a) Front axle ......................................kgms.
(b) Rear axle ......................................kgms.
(c) Any other axle ......................................kgms.
(d) Tandem axle ......................................kgms.
Additional particulars of alternative or additional Semi-Trailer Registered with an Articulated
vehicle
19. Type of body
20. Unladen weight
21. Number, description and size of tyres on (each) axle
22. Registered axle weight (in respect of each axle) ..............................................
This certificate is valid from. ..............................................to.................................
Date..............................................
Signature of the Registering Authority
Note.--The motor vehicle above described is--
277
(i) Subject to a Hire-purchase agreement with ....................................................
(ii) Subject to Lease agreement with ....................................................
(iii) Subject to Hypothecation in favour of ....................................................
Specimen signature of the Financier (to be affixed) and attested by the Registering Authority
with his seal
This certificate is renewed:
Signature of the Registering Authority
Date...........................................................
From ............................to..............................................................................
Date .......................................... Signature of the Registering Authority
From ....................................to...........................................................................
Date ........................................... Signature of the Registering Authority
From ...................................to..........................................................................
Date ........................................... Signature of the Registering Authority
From .................................to...............................................................................
Date ........................................... Signature of the Registering Authority
Note.--
(i) This shall be in the form of a book having sufficient pages for recording transfer of
ownership, change of address, Hire-purchase endorsement, cancellation of Hire-purchase entries,
alteration, suspension and cancellation of Certificate of registration, etc. Such entries shall be
duly numbered serially in chronological order date-wise.
(ii) Strike out whichever is inapplicable.
(iii) Wherever transfer of ownership/change of address/note and cancellation of endorsement of
any agreement is recorded, specimen signature of the Registered Owner and Financier as the
case may be, shall be affixed, sealed and attested by the Registering Authority next to the
recording in such manner that part of impression of the seal or stamp and attestation shall fall
upon the signatures.
(iv) For two-wheeler and cars, a book be provided without Additional particulars of the transport
vehicle and Trailer or Semi-Trailer.
(v) For transport vehicles, a book can be provided without the column of Renewal of
Registration.
278
FORM 23A
(See rule 48)
CERTIFICATE OR REGISTRATION (IN ELECTRONIC MEDIUM AS SMART CARD,
ETC.)
Particulars to be printed on the Visual Inspection Zone of Smart Card:
Contents of Visual Inspection Zone
Certificate of Registration
1. Name of State Transport Department ............................
2. Card Serial Number ............................
3. Vehicle Registration Number ............................
4. Registration Date (In dd-mm-yyyy) ............................
5. Owner's details: ............................
5.1 Name ............................
5.2 Son/Wife/Daughter of ............................
5.3 Address: Current Postal Address ............................
5.4. PAN Number Ooptional) ............................
6. Vehicle's details: ............................
6.1 Name of Manufacturer with Make ............................
6.2 Colour ............................
6.3 Fuel ............................
6.4 Vehicle Class ............................
6.5 Body Type ............................
6.6 Seating Capacity ............................
6.7 Standing Capacity ............................
6.8 Date of Manufacture (In mm-yyyy) ............................
6.9 Unladen Weight ............................
6.10 Cubic Capacity ............................
6.11 Wheel Base ............................
6.12 Number of Cylinders ............................
6.13 Owner Serial (Optional) ............................
6.14 Chassis Number ............................
6.15 Engine number or motor number in
279
the case of Battery Operated Vehicles] ............................
7. Home State Tax paid upto (In dd-mm-yyyy) ............................
8. Registration validity (In dd-mm-yyyy) ............................
9. Signature of Issuing Authority ............................
10. Identification of Issuing Authority ............................
Contents of Machine Readable Zone
11. Chip Serial Number ............................
12. Owner Serial (No. of this the ownership
has changed) ............................
13. Tax Date (Date of Validity of Tax): ddmm-
yyyy ............................
14. Registration Validity (In dd-mm-yyyy) ............................
15. Hypothecation details: ............................
15.1 Name of Financier ............................
15.2 Address of Financier ............................
15.3 Hypothecated from (In dd-mm-yyyy) ............................
15.4 Hypothecated upto (In dd-mm-yyyy) ............................
16. NOC detail:-- (future use) ............................
16.1 NOC number ............................
16.2 State to (Code only) ............................
16.3 RTO to ............................
16.4 NCRB clearance number ............................
16.5 NOC issue date (in dd-mm-yyyy) ............................
17. Insurance detail: -- (future use) ............................
17.1 Name of Company ............................
17.2 Covernote/Policy Number ............................
17.3 Type of Insurance ............................
17.4 Validity upto (In dd-mm-yyyy) ............................
18. Pollution under control detail: -- (future
use) ............................
18.1 Checking centre (code only) ............................
18.2 Validity upto (In dd-mm-yyyy) ............................
19. Tax Payment details: ............................
Amount ............................
Fine ............................
280
Exemption/Receipt number ............................
Payment Date (In dd-mm-yyyy) ............................
Valid from (In dd-mm-yyyy) ............................
Valid upto (In dd-mm-yyyy) ............................
Exemption (Y/N) ............................
20. Fitness details: ............................
Validity (In dd-mm-yyyy) ............................
Inspecting Officer ............................
Location ............................
21. Additional Information in respect of
Transport Vehicle: ............................
Gross Vehicle Weight (in kgs.) ............................
Number, Description and Size of Tyres ............................
Registered Axle Weight ............................
Number of Semi Trailers ............................
22. Challan details: ............................
Challan number ............................
Accused person (O-owner, D-driver, Cconductor) ............................
Section (Code only) ............................
Challaning Officer ............................
Location ............................
Date & Time (In dd-mm-yyyy/hh: mm) ............................
Disposing Authority (R-RTO, C-Court) ............................
Disposal date (In dd-mm-yyyy) ............................
Penalty ............................
Receipt number ..........................
23. Permit details: ............................
Permit number ............................
Type of permit ............................
Validity from (In dd-mm-yyyy) ............................
Validity upto (In dd-mm-yyyy) ............................
Area of operation ............................
281
Route from ............................
Route upto ............................
Stage 1 ............................
Stage 2 ............................
Stage 3 ............................
24. Permit Actions: ............................
Action Code SUR/SUS/CAN ............................
From date (In dd-mm-yyyy) ............................
Upto date (In dd-mm-yyyy) ............................
Reason ............................
25. All India Tourist Permit details: ............................
From date (In dd-mm-yyyy) ............................
Upto date (In dd-mm-yyyy) ............................
26. Authorisation details: ............................
State (Code only) ............................
Authorisation number ............................
Validity from (In dd-mm-yyyy) ............................
Validity upto (In dd-mm-yyyy) ............................
Bank Draft Amount ............................
Bank Draft Number ............................
Bank (Code only) ............................
Branch ............................
Bank draft issue date (In dd-mm-yyyy) ............................
27. Counter Signature details: ............................
Authorizing Office ............................
Validity from (In dd-mm-yyyy) ............................
Validity upto (In dd-mm-yyyy) ............................
Route from ............................
Route upto ............................
Stage 1 ............................
Stage 2 ............................
282
Stage 3 ............................
28. In case of Auto Rickshaw /Local
Taxies: ............................
Meter number ............................
Note.--(i) At the time of payment of next instalment of tax, the issuing authority shall issue a
paper receipt stating that date of validity of tax paid has been extended from so and so date to
so and so date. The receipt shall be duly signed by designated authority. Name of issuing
authority shall also be clearly spelt out. The receipt shall be security printed water mark paper
carrying such hologram as may be specified by the concerned State.
Note.--(ii) In respect of articulated vehicle, additional information of trailer not required.]
283
FORM 24
(See rule 49)
REGISTER OF MOTOR VEHICLE
Description of
Registration of
Motor Vehicle
Particulars of regd. owner on
registration/ transfer of
ownership /change of address of
motor vehicle
Particulars of agreement
of hire purchase, lease &
Hypothecation
Entries relating to
the certificate of
registration
Remarks
Particulars Details Full Name
Son/ wife/
daughter of,
present
address
Specimen signature
pasted and attested by
Registering Authority
with official seal
affixed
Note and
cancellation of
an
endorsement
of such
agreement
with full
name, and
address of the
Financier,
attested by
Registering
Authority
Specimen
signature or
thumb
impression of
Financier,
pasted and
attested by
Registering
Authority
Such as
suspension/
cancellation,
issue
o
f
duplicate (to
the
Registered
Owner) /fresh
(to the
Financier),
and
exemption
granted, NOC
issued,
vehicle
removed to
other Dist /
State,
Al i f
1 2 3 4 5 6 7 8
1. Registration No. ...........................................
2, Date of Registration ...........................................
3. Name of the owner ...........................................
Son/wife/daughter of ...........................................
Full address (Permanent) ...........................................
(Temporary) ...........................................
4. Dealer's name and address ...........................................
5. Particulars of previous registration number viz. ..........................................
(a) The name of the Registering Authority ..........................................
(b) Registration Number assigned ..........................................
(c) Date of expiry of registration ..........................................
(d) Whether held under HP /lease & hypothecation ..........................................
284
(e) if so, particulars of financier etc. ..........................................
6. The motor vehicle is -- ..........................................
(a) new ..........................................
(b) ex-army ..........................................
(c) imported ..........................................
7. Class of vehicle 2[(if motor cycle, with gear or without gear)] ..........................................
8. Maker's name ..........................................
9. Type of body ..........................................
10. Month and year of manufacture ..........................................
11. No. of Cylinders ..........................................
12. Chassis No. Affix pencil print and to be attested by the Registering
Authority ..........................................
13. Engine number or motor number in the case of Battery Operated
Vehicles ..........................................
14. Fuel used in engine ..........................................
15. Horse power ..........................................
16. Cubic capacity ..........................................
17. Maker's classification ..........................................
18. Wheel base ..........................................
19. Seating capacity including driver ..........................................
20. Colour or colours of body, wings, front end ..........................................
21. Unladen weight ..........................................
22. Gross vehicle weight ..........................................
(i) as certified by manufacturer ..........................................
(ii) as registered ..........................................
23. Additional particulars in case of transport vehicle other than motor
cabs. ..........................................
1. No., description and size of tyres, front axle, rear axle, any other
axle, Tandem axle. ..........................................
2. Registered axle weight
Front axle.........kg.
Rear axle. .....kg. Any
other axle. ....kg.
Tandem axle. ...kg.
24. Additional particulars of alternatives or additional trailer or semitrailers
registered with an articulated vehicle. ..........................................
1. Type of body ..........................................
2. Unladen weight ..........................................
285
3. Number and description and size of tyre on each axle. ..........................................
4. Registered axle weight in respect of each vehicle. ..........................................
25. Insurance certificate /Cover Note no........... dated.......... vehicle
valid from....to...... issued by. ......(Name and address of the
insurance company) ...............................
26. Rate of motor vehicle tax ..........................................
27. Validity of registration from. ...... to.. ....renewal from.......to...... ..........................................
28. Name and designation of the Inspecting Officer who certified the
vehicle as fit for registration ..........................................
29. Name and designation and signature of the Registering Authority ..........................................
Note.--Specimen signature of the registered owners and financiers pasted in columns 4 & 6 respectively,
shall be attested with office seal by the Registering Authority in such a manner that the part of impression
of seal of stamp and attestation shall fall upon each signature.
286
(a) Registration No. : ………………………………………………………………..
(b) Date of issue : …………………………………………………………………
(c) Date of expiry : ………………………………………………………………..
(d) Registering Authority by which
the certificate was issued/last
renewed
: …………………………………………………………………
………………………………………………………………..
My present address is : …………………………………………………………………
………………………………………………………………..
………………………………………………………………..
……………………………………………………………….
If this address is not entered in the certificate of registration, I do/do not wish that it should be so
entered. The renewal of the certificate has not been refused by any Registering Authority.
I hereby declare that the certificate of registration has not been cancelled or suspended by any
Registering Authority.
1. Class of vehicle : ………………………………………………………………..
2. The motor vehicle was registered
as
(a) a new vehicle
(b) ex-army vehicle
(c) imported vehicle
:
:
:
………………………………………………………………..
………………………………………………………………..
………………………………………………………………..
3. Type of body : …………………………………………………………………
4. Maker’s name : …………………………………………………………………
5. Month and year of manufacture : …………………………………………………………………
6. Number of cylinders : …………………………………………………………………
7. Cubic capacity/Horse power : …………………………………………………………………
8. Maker’s classification : ………………………………………………………………..
FORM 25
[See Rule 52(1)]
FORM OF APPLICATION FOR RENEWAL OF CERTIFICATE OF REGISTRATION OF A
MOTOR VEHICLE, OTHER THAN A TRANSPORT VEHICLE
To
The Registering Authority,
……………………………
…………………………….
I…………………………………………………….hereby apply for the renewal of the certificate
of registration which is attached, the particulars of which are as follows:-
287
9. Chassis No. – Affix pencil print : …………………………………………………………………
10. Engine number or motor number
in the case of Battery Operated
Vehicles
: …………………………………………………………………
11. Seating capacity (including
driver)
: …………………………………………………………………
12. Unladen weight : …………………………………………………………………
13. Fuel used : ………………………………………………………………..
I enclose the certificate of insurance for perusal and return.
I have paid the fee of Rs……………………………………..
Date………………………….. Signature or thumb impression of the Applicant
Note. – The motor vehicle above described is not subject to an agreement of hire-purchase, lease or
hypothecation.
The vehicle is:
(i) Subject to hire-purchase agreement/lease agreement with…………………………………………
(ii) Subject to hypothecation in favour of………………………………………………………………
Strike out whichever is inapplicable.
Signature or thumb impression of the Registered Owner
Specimen signature or thumb impression of the Registered Owner:
1……………………………………………………………………
2……………………………………………………………………
3……………………………………………………………………
CERTIFICATE
Inspected the vehicle – verified the chassis number and engine number.
Certified that the particulars contained in the application and the corresponding particulars declared in the
certificate of registration of the vehicle are true and that the vehicle complies with the requirements of the
Motor Vehicles Act, 1988, and Rules made thereunder.
Signature of the Inspecting Authority
Name…………………………………
Designation…………………………..
288
FORM 26
[See Rule 53]
APPLICATION FOR THE ISSUE OF DUPLICATE CERTIFICATE OF REGISTRATION
(To be made in duplicate if the vehicle is held under an agreement of hire-purchase/lease/hypothecation and in triplicate if the
Original Registering Authority is different, the duplicate copy and the triplicate copy with the endorsement of the Registering
Authority to be returned to the Financier and Registering Authority simultaneously on issue of duplicate certificate)
To
The Registering Authority,
……………………………
…………………………….
The certificate of registration of my/our motor vehicle, the registration mark of which is…………………. has been
lost/destroyed/completely written-off/soiled/torn/mutilated in the following circumstances:-
………………………………………………………………………………………………………………..
……………………………………………………………………………………………………………….
I / We hereby declare that to the best of my/our knowledge the Registration of the vehicle has not been suspended or
cancelled under the provisions of the Act or Rules made thereunder and the circumstances explained above are true.
I / We do hereby apply for the issue of a duplicate Certificate of Registration.
The written-off/soiled/torn/mutilated Certificate of Registration is enclosed.
The vehicle is not held under any agreement of Hire-purchase/Lease/Hypothecation. The vehicle is also not
superdari and free from all encumbrances.
I / We hereby declare that I / We on……………………….(date) have filed a complaint (copy enclosed) with the
police about the loss of Certificate of Registration immediately after the loss has been noticed.
Date………………………….. Signature / thumb impression of the Applicant
The vehicle is held under hire-purchase/lease/hypothecation agreement with……………………………..
………………………………. ………….and the “No Objection Certificate” has been granted / refused by the
financier hereunder: Where “No Objection Certificate” is refused, applicant shall make a declaration as required
under sub-section (8) of section 51.
Signature or thumb impression of the Owner
Name…………………………………………
Full address…………………………………..
………………………………………………..
Date………………….. ……………………………………………….
Note. – (1) Full particulars of the circumstances shall be furnished in the case of loss or destruction of the
Registration Certificate.
(2) Strike out whichever is inapplicable.
289
CONSENT OF THE FINANCIER FOR GRANT OF “NO OBJECTION CERTIFICATE”
UNDER SECTION 51 (6)
I / We being a party to an agreement of hire-purchase/lease/hypothecation in respect of motor vehicle specified
above;
(i) have “No Objection” in issue of the duplicate certificate of registration of the said vehicle.
(ii) have “Objection” in issue of the duplicate registration certificate of the said vehicle, for the reasons given
hereunder………………………………………………………………………………………………………
…………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………
Date…………………… Signature of the Financier
OFFICE ENDORSEMENT
Ref. Number……………………………………Office of the………………………………………………………..
A duplicate certificate of registration as requested above is issued with the note of agreement of hire-
purchase/lease/hypothecation on………………………………….and is noted in the original registration records in
Form 24.
Date………………………. Signature of the Registering Authority
To
The Financier………………………………………………………………………………………………………..
The Registering Authority…………………………………………………………………………………………..
(To be sent to both the above parties by Registered Post Acknowledgment Due)
Specimen signature or thumb impression of the Registered Owner and Financier are to be obtained in original
application for affixing and attestation by the Registering Authority with the Office seal in Forms 23 and 24 in such
a manner that the part of impression of seal or a stamp and attestation shall fall upon each signature:
Specimen Signatures of the Financier Specimen Signatures of the Registered Owner
1……………………………………… 1……………………………………………….
2…………………………………….. 2………………………………………………..
290
FORM 27
[See Rule 54]
APPLICATION FOR ASSIGNMENT OF NEW REGISTRATION MARK TO A MOTOR VEHICLE
(To be made in triplicate if the vehicle is held under an agreement of hire-purchase/lease/hypothecation the duplicate copy
and the triplicate copy with the endorsement of the Registering Authority to be returned to the Financier and Original
Registering Authority simultaneously, on the assignment of a new registration mark)
To
The Registering Authority,
……………………………..
……………………………..
I / We ……………..…………………………………………………………….. Son/Wife/Daughter of
…………………………………………………………being the Registered Owner of Motor Vehicle No
…………………………………………bearing Chassis No…………………………………………………..
[Engine number or motor number in the case of Battery Operated Vehicles]…………………………………...
Type of vehicle…………………………………………………………………………. registered in the State of
………………..……………………………………………………hereby declare that I/We have, since
the………………………………………day of…………………………………..kept the said motor vehicle in
this State and hereby apply for the assignment of a new registration mark to the said motor vehicle.
I/We hereby declare that the registration is valid up to……………………………………….. and it has
not been suspended or cancelled under the provisions of the Act.
I/We enclose the certificate of registration and the certificate of fitness (*) of the motor vehicle.
I/We enclose a “No Objection Certificate” from the Registering Authority.
If the “No Objection Certificate” from the Registering Authority is not enclosed the applicant should file
along with this application a declaration as required under the first proviso to sub-section (1) of section 47.
The vehicle is not subject to an agreement of hire-purchase/lease/hypothecation.
The vehicle is subject to an agreement of hire-purchase/lease/hypothecation with ………………………..
……………………………………………………………………….. and the NOC has been Granted/Refused by
the Financier thereunder.
If “No Objection Certificate” has been refused by the financier the applicant should file along with this
application a declaration as required under sub-section (8) of section 51.
Date……………………………… Signature or thumb impression of the Applicant
Strike out whichever is inapplicable.
291
CONSENT OF THE FINANCIER FOR GRANT OF “NO OBJECTION CERTIFICATE”
UNDER SECTION 51(6)
I /We being a party to an agreement of hire-purchase/lease/hypothecation in respect of motor vehicle
specified above:
(1) have “No Objection” in assigning the new Registration Mark to the said vehicle.
(2) have “Objection” in assigning the new Registration Mark to the said vehicle for the reasons given
hereunder ……………………………………………………………………………………………….
………………………………………………………………………………………………………….
………………………………………………………………………………………………………….
Date…………………………… Signature of the Financier
OFFICE ENDORSEMENT
Ref. Number……………………………….. Office of the………………………………………………………..
The Vehicle No……………………………………..on removal to this State has been assigned a new
Registration Mark…………………………………………………….. (here enter the Registration mark).
Date…………………………… Signature of the Registering Authority
To
The Financier…………………………………………………………………………………………………….
The Registering Authority………………………………………………………………………………………..
(to be sent to both the above parties by Registered Post Acknowledgment Due)
292
FORM 28
[See Rules 54, 58(1), (3) and (4)]
APPLICATION AND GRANT OF NO OBJECTION CERTIFICATE
(To be made in quadruplicate if the vehicle is held under an agreement of hire-purchase/ lease/ hypothecation, in duplicate copy,
the triplicate copy and the quadruplicate copy with the endorsement of the Registering Authority to be returned to the Registered
Owner of the vehicle, the Registering Authority in whose jurisdiction the vehicle is to be removed and the financier
simultaneously on grant/refusal of a “No Objection Certificate”)
PART I – APPLICATION
To
The Registering Authority,
……………………………..
……………………………...
I/We intend to transfer the vehicle to the jurisdiction of the Registering Authority ……………….
…………………………………………………………………………………………………………………………….
I/We intend to sell the vehicle to Shri/Smt./Kumari……………………………………………….. who resides
in the jurisdiction of the Registering Authority……………………………………………… ………………………..of
the State……………………………………………………….. I/We therefore request for the issue of a No Objection
Certificate for my/our vehicle, the particulars of which are furnished below:
1. Name and address : ………………………………………………………………..
……………………………………………………………….
………………………………………………………………..
……………………………………………………………….
2. Son/Wife/Daughter of : ……………………………………………………………….
3. Registration number of the vehicle : ……………………………………………………………….
4. Class of vehicle : ……………………………………………………………….
5. Registering Authority which originally
registered the vehicle
: ……………………………………………………………….
6. Engine number or motor number in the case
of Battery Operated Vehicles
: ……………………………………………………………….
7. Chassis number (Affix also pencil print) : ……………………………………………………………….
8. Period of stay in the State : ……………………………………………………………….
9. Period up to which motor vehicle tax has
been paid
: ……………………………………………………………….
10. Whether any demand for tax is pending, if
so, give details
: ………………………………………………………………..
………………………………………………………………..
11. Whether the vehicle is involved in any theft
cases, if so give details
: ………………………………………………………………..
………………………………………………………………..
293
12. Whether any action under section 53, 54 or
55 of the Motor Vehicles Act, 1988 is
pending before any Registering Authority,
or other prescribed Authority, if so, give
details
: ………………………………………………………………..
……………………………………………………………….
……………………………………………………………….
……………………………………………………………….
13. Whether the vehicle is involved in any case
of transport of prohibited goods, if so, give
details.
: ……………………………………………………………….
………………………………………………………………..
14. Whether the vehicle is held under an
agreement of hire-purchase/lease/
hypothecation, if so give full name and
address of the Financier
: ………………………………………………………………..
………………………………………………………………..
………………………………………………………………..
We solemnly declare that the above statement is true.
Date…………………………….. Signature or thumb impression of Registered Owner
PART II – CONSENT OF FINANCIERS
IN THE CASE OF MOTOR VEHICLE SUBJECT TO AN AGREEMENT
I /We being a party to an agreement of the Hire-purchase / Lease / Hypothecation in respect of the above said
vehicle hereby
1. Give consent to issue the No Objection Certificate for the said vehicle only for the purpose referred above.
2. Refuse to give consent for issue of No Objection Certificate for the said vehicle due to the reasons furnished
hereunder:
……………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………
Date…………………………. Signature of the Financier
PART III – OFFICE ENDORSEMENT
(GRANT/REFUSAL OF “NO OBJECTION CERTIFICATE” UNDER SECTION 48(3) OF MOTOR VEHICLES ACT, 1988)
(1) No Objection Certificate in respect of the vehicle, the detailed particulars whereof are recorded over above is
hereby granted under section 48(3) of the Motor Vehicle Act, 1988(valid for use at the Registering Authority,
on whom it is issued).
(2) No Objection Certificate in respect of the motor vehicle, the detailed particulars whereof recorded over above
is hereby refused under section 48(3) of the Motor Vehicle Act, 1988, for the reasons recorded as under:
………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………
Date……………………… Signature with seal of Registering Authority
Address……………………………………
……………………………………………
Strike out whichever is inapplicable.
To
The Registered Owner………………………………………………………………………………………………
The Financier………………………………………………………………………………………………………..
The Registering Authority…………………………………………………………………………………………..
(to be sent to the above parties by Registered Post Acknowledgment Due)
294
FORM 29
[See Rule 55(1)]
NOTICE OF TRANSFER OF OWNERSHIP OF A MOTOR VEHICLE
(To be made in duplicate and the duplicate copy with the endorsement of the Registering Authority to be returned to the
transferor or immediately on making entries of transfer of ownership in certificate of Registration and Form 24)
To
The Registering Authority……………………………………………………….(in whose jurisdiction the
Transferee resides)
I/We………………………………………………………………….…..resident of………………………..
……………………………………………………………………………………………………………….. have
on the……………………..day of the year…………………………………. Sold and delivered my / our Vehicle
No……………………………………………make………………………………………………………….……..
Chassis No……………………………………………………….[Engine number or motor number in the case of
Battery Operated Vehicles]…………………………………………………………………………………….to
Shri / Smt ………………………...……………………………………………………..(Name) Son/Wife/Daughter
of…………………………………….………………………………………………………………….. residing at
………………………………………………………………………………………………………………………..
……………………………………………………………………………………………………………… (House
No./Street/Village/Town/Distt. And State) under an agreement of hire purchase/lease/ hypothecation
with………………………………………………………………………………………….....................................
The Registration Certificate and Insurance Certificate have been handed over to him /her / them.
To the best of my/our knowledge and belief the vehicle is not superdari and free from all encumbrances
and information furnished is true. I/We undertake to hold my/our self-responsible for any inaccuracy or
suppression of information.
Signature of the Financier Signature or thumb impression of the
(as his consent) Registered Owner (Transferor)
Date……………………. Date………………………………..
I/We………………………………….(Transferee)
Copy to the Registering Authority…………………………………………………in whose jurisdiction the
transferor resides.
Note. – To be sent to the Registering Authority by Registered Post Acknowledgment Due.
OFFICE ENDORSEMENT
Ref.No…………………………………. Office of the……………………………………………………..
The ownership of the vehicle has been transferred to the name of………………………………………….. with
the note of the above said agreement with effect from……………………………….(date).
Date……………………………. Signature of the Registering Authority with Office seal
Strike out whichever is inapplicable.
To
The Transferor…………………………………………………………………………………………………….
(To be sent by Registered Post Acknowledgment Due)
295
FORM 30
[See Rule 55(2) and (3)]
APPLICATION FOR INTIMATION AND TRANSFER OF OWNERSHIP
OF A MOTOR VEHICLE
(To be made in duplicate if the vehicle is held under an agreement of hire-purchase / lease / hypothecation. The
duplicate copy with the endorsement of the Registering Authority to be returned to the Financier simultaneously on
making the entry of the transfer of ownership in the Certificate of Registration and Registration Record in Form 24)
To
The Registering Authority……………………………………………………………………….
PART I – FOR THE USE OF THE TRANSFEROR
Name of the transferor……………………………………………………... ……………………………….
Son/Wife/Daughter of………………………………………………………………………………………..
Full Address………………………………………………………………………………………………….
……………………………………………………………………………………………………………….
……………………………………………………………………………………………………………….
I/We, hereby declare that I/We have on this………………………day of the
year………………………..sold my/our motor vehicle bearing Registration mark
………………………………… to Shri./Smt ………………………………………… Son/Wife/Daughter
of ……………………………………………………………… residing at…………………………………
………………………………………………………………………………………………………………
…………………………………………………………………………………………..(full address) and
handed over the Certificate of Registration and the Certificate of Insurance to him/her/them.
I/We hereby declare that to the best of my/our knowledge the certificate of registration of the
vehicle has not been suspended or cancelled.
*I/We enclose the “No Objection Certificate” issued by the Registering Authority.
**If the “No Objection Certificate” issued from the Registering Authority is not enclosed, the
transferor should file along with this application a declaration as required under sub-section (1) of section
50.
Date……………………… Signature or thumb impression of the Transferor
*Details of suspension or cancellation.
**Strike out whichever is inapplicable.
296
PART II – FOR THE USE OF TRANSFEREE
Name of the Transferee……………………………………………………………………………………..
Son/Wife/Daughter of……………………………………………………………………………………….
Age………………………………. Full address…………………………………………………………….
……………………………………………………………………………………………………………….
………………………………………………………………………………………………………………
………………………………………………………………………….(Proof of address to be enclosed).
I/We hereby declare that I/We have on this…………………day of the year……………………..
purchased the motor vehicle bearing registration number…………………………….. …………………..
from…………………………………………………………………………………………………………..
………………………………………………………………………………………………………………
………………………………………………(name and full address) and request that necessary entries
regarding the transfer of ownership of the vehicle in my/our name may be recorded in the certificate of
registration and certificate of fitness of the vehicle, which is enclosed.
The certificate of Insurance is also enclosed. To the best of my knowledge and belief I/We have
not suppressed any facts and information furnished is true. The vehicle is not superdari and free from all
encumbrances. I/We undertake to hold myself responsible for any inaccuracy of the information.
Date……………………… Signature or thumb impression of the Transferee
CONSENT OF THE FINANCIER IN THE CASE OF MOTOR VEHICLE SUBJECT TO AN AGREEMENT OF
HIRE-PURCHASE/LEASE/HYPOTHECATION
I/We being a party to an agreement of hire-purchase/lease/hypothecation in respect of motor vehicle specified
above, give consent to the transfer of ownership of the said motor vehicle in the name of the Transferee named
above, with whom I/We have entered into an agreement of hire-purchase/lease/hypothecation.
(Full name and address of the Financier)
Date…………………… Signature of the Financier
OFFICE ENDORSEMENT
Ref.No………………………………… Office of the…………………………………………………………………..
The transfer of ownership of vehicle under continuation of an endorsement of hire-purchase /lease/ hypothecation
agreement has been recorded with effect from……………………………in the Registration Certificate of the
vehicle…………………………………and in the Registration Record of this office in Form 24.
Date………………………….. Signature of the Registering Authority
To
The Financier…………………………………………………………………………………………………………
(To be sent by Registered Post Acknowledgment Due)
Specimen signature or thumb impression of the registered owner and the Financier are to be obtained in the original
application for affixing and attestation by the Registering Authority with the office seal in Forms 23 and 24, in such
manner that the parts of impression of seal or stamp and attestation shall fall upon each signature.
Specimen signatures of the Financier Specimen signatures of the Registered Owner
1…………………………………………….. 1………………………………………………………
2……………………………………………. 2………………………………………………………
297
FORM 31
[See Rule 56(2)]
APPLICATION FOR TRANSFER OF OWNERSHIP IN THE NAME OF THE PERSON
SUCCEEDING TO THE POSSESSION OF THE VEHICLE
(To be made in duplicate if the vehicle is held under an agreement of hire-purchase / lease / hypothecation and the
duplicate copy with an endorsement of the Registering Authority to be returned to the financier simultaneously on
making the entry of Transfer of ownership in the Certificate of Registration and Office Records in Form 24)
To
The Registering Authority,
……………………………
……………………………
1. Vehicle Registration No. : …………………………………………………………..
Make and model : …………………………………………………………..
Chassis No.
[Engine number or motor number in the
case of Battery Operated Vehicles]
: …………………………………………………………..
Type of vehicle : …………………………………………………………..
2. Name of the deceased registered owner : …………………………………………………………..
3. Name and age of the person succeeding to
the possession of the vehicle
: …………………………………………………………..
Son / Wife / Daughter of : …………………………………………………………..
Full postal address (proof of address to be
enclosed)
: …………………………………………………………..
………………………………………………………….
………………………………………………………….
………………………………………………………….
4. Relationship with the deceased registered
owner
: …………………………………………………………..
5. Proof of his succession : …………………………………………………………..
name.
Certificate of registration is enclosed herewith. Kindly transfer the ownership of the vehicle in my
Date……………………………. Signature of the Applicant
298
CONSENT OF THE FINANCIER IN THE CASE OF MOTOR VEHICLE HELD UNDER ANY OF
THE AGREEMENTS
I/We being a party to an agreement of hire-purchase/lease/hypothecation in respect of the motor
vehicle specified above, consent to the transfer of ownership of the said motor vehicle in the name of the
applicant named above, with whom I/We have entered into an agreement of Hire-purchase / Lease /
Hypothecation.
………………………………………………………..
………………………………………………………...
………………………………………………………..
………………………………………………………..
(Full Name & Address of the Financier) Signature of the Financier
Date……………………..
OFFICE ENDORSEMENT
Ref. Number…………………………….. Office of the………………………………………………….
The transfer of ownership of the Motor Vehicle under continuation of an endorsement of hire-purchase /
lease / hypothecation agreement has been recorded with effect from…………………………..in the
certificate of registration of the vehicle and the registration record of this office in Form 24.
Date………………………. Signature of the Registering Authority
Strike out whichever is inapplicable.
To
The Financier………………………………………………………………………………………………..
……………………………………………………………………………………………………………….
(To be sent by Registered Post Acknowledgment Due)
Specimen signatures or thumb impression of the Registered Owner and Financier are to be
obtained in original application for affixing and attestation by the Registering Authority with office seal
in Forms 23 and 24, in such a manner that the part of impression of seal or stamp and attestation shall fall
upon each signature:
Specimen signature of the Financier Specimen signature of the Registered Owner
1……………………………………. 1……………………………………………..
2……………………………………. 2……………………………………………..
299
FORM 32
[See Rule 57(1)]
APPLICATION FOR TRANSFER OF OWNERSHIP IN CASE OF A MOTOR VEHICLE
PURCHASED OR ACQUIRED IN PUBLIC AUCTION
To
The Registering Authority,
…………………………..
…………………………..
I/We…………………………………………………………………………………. Son/ Wife /
Daughter of……………………………………………., ………………………………………………….
………………………………………………………………………………………………………………
……………………………………………………………………………(full address along with proof)
have purchased or acquired the Vehicle No………………………………………………………………..
bearing Chassis No…………………………………………………………….. [Engine number or motor
number in the case of Battery Operated Vehicles]…………………………………………………………..
……………………………..make…………………………………………………………………model
……………………………………………………………………type of vehicle…………………………..
……………………………………in public auction conducted by or on behalf of the Government.
I/We enclose the documents required to be submitted by me/us under sub-rule (1) of Rule 57.
The ownership of the motor vehicle may kindly be transferred to my/our name.
Date…………………….. Signature or thumb impression of the applicant
300
FORM 33
[See Rule 59]
INTIMATION OF CHANGE OF ADDRESS FOR RECORDING IN THE CERTIFICATE OF
REGISTRATION AND OFFICE RECORDS
(To be made in triplicate if the vehicle is held under agreement of hire-purchase / lease / hypothecation, the
duplicate copy and the triplicate copies with the endorsement of the Registering Authority to be returned to the
Financier and the Registering Authority (from whose jurisdiction the vehicle is removed) simultaneously, on making
the entry of change of address in the certificate of registration and Form 24)
To
The Registering Authority,
…………………………….
…………………………….
I/We………………………………………………………………………………………………….
Son/Wife/Daughter of………………………………………………………………………………………..
(full address)…………………………………………………………………………………………………
………………………………………………………………………………………………………………
……………………………………………………………………………………………………………….
Registered Owner of motor vehicle No…………………………………………………………..have
ceased to reside, do not have the place of business at the address recorded in the certificate of registration
with effect from…………………………………………. The present address is given below (evidence to
be enclosed).
………………………………………………………………………………………………………………
………………………………………………………………………………………………………………
………………………………………………………………………………………………………………
*The vehicle is not held under any agreement of hire-purchase /lease /hypothecation.
*The vehicle is held under an agreement of hire-purchase / lease / hypothecation with …………..
………………………………………………………………………………………………………………
………………………………………………………………………………………………………………..
(Name and Full address of the Financier)
The certificate of registration is enclosed. I/We request that the change of address may be
recorded in the certificate of registration and Form 24.
Date…………………. Signature or thumb impression of the
Registered Owner of the vehicle
Strike out whichever is inapplicable
301
CONSENT OF THE FINANCIER IN THE CASE OF MOTOR VEHICLE HELD UNDER AN
AGREEMENT
I/We being a party to an agreement of hire-purchase / lease / hypothecation in respect of the
above said vehicle, hereby:
1. Give consent for effecting the above change of address with the note of an agreement in my/our
favour in Forms 23 and 24 by the Registering Authority.
2. Refuse to give consent for effecting the above change of address by the Registering Authority,
due to the reasons furnished hereunder:
………………………………………………………………………………………………………
………………………………………………………………………………………………………
………………………………………………………………………………………………………
Date……………………… Signature of the Financier
OFFICE ENDORSEMENT
Ref. Number…………………………… Office of the……………………………………………………..
The above change of address has been entered with the note of agreement of hire-purchase / lease /
hypothecation in favour of the Financier in the Certificate of Registration and in Form 24.
Date………………………. Signature of the Registering Authority
To
The Financier……………………………………………………………………………………………….
The Registering Authority………………………………………………………………………………….
(To be sent to both the above parties by Registered Post Acknowledgment Due)
Specimen signatures or thumb impression of the Registered Owner and Financier are to be obtained in
original application for affixing and attestation by the Registering Authority with office seal in Forms 23
and 24, in such a manner that the part of impression of seal or stamp and attestation shall fall upon each
signature:
Specimen signature of the Financier Specimen signature of the Registered Owner
1……………………………………. 1……………………………………………..
2……………………………………. 2……………………………………………..
302
FORM 34
[See Rule 60]
APPLICATION FOR MAKING AN ENTRY OF AN AGREEMENT OF HIRE-PURCHASE / LEASE /
HYPOTHECATION SUBSEQUENT TO REGISTRATION
(To be made in duplicate and in triplicate where the Original Authority is different, the duplicate copy and the triplicate copy
with the endorsement of the Registering Authority to be returned to the Financier and the Registering Authority simultaneously
on making the entry in the certificate of registration and Form 24).
To
The Registering Authority,
…………………………….
…………………………….
The motor vehicle bearing registration number……………………………………………..is the subject of an
agreement of hire-purchase /lease /hypothecation between………………………………….
……………………………………………………………..…….the registered owner /person to be registered as
owner* and ………………………………………………………………………………………………………….
……………………………………………………………………………………………………………………... ……
……………………………………………………………………… (fill the name and full address of the financier).
We request that an entry of the agreement to be made in the certificate of registration and the relevant
records in your office.
The certificate of registration together with the fee is enclosed.
Date………………………….. Signature or thumb impression of Registered Owner
*Strike out whichever is inapplicable.
Signature of the Financier
OFFICE ENDORSEMENT
Ref. Number……………………………………… Office of the…………………………………………...
The entry of the agreement of hire-purchase / lease / hypothecation as requested above is recorded in this office Registration
Record in Form 24 and certificate of Registration on…………………………(date).
Date…………………………… Signature of the Registering Authority
To
The Financier………………………………………………………………………………………………..
The Registering Authority…………………………………………………………………………………..
(To be sent to both the above parties by Registered Post Acknowledgment Due)
Specimen Signatures of the Financier are to be obtained in original Application for affixing and attestation by the Registering
Authority with official seal in Forms 23 & 24, in such a manner that part of impression of the seal or a stamp and attestation
shall fall upon each signature:
Specimen signatures of the Financier
1…………………………………………………………… 2…………………………………………………………..
303
FORM 35
[See Rule 61(1)]
NOTICE OF TERMINATION OF AN AGREEMENT OF HIRE-PURCHASE/LEASE/ HYPOTHECATION
(To be made in duplicate and in triplicate where the original Registering Authority is different, the duplicate copy and the triplicate
copy with the endorsement of the Registering Authority to be returned to the Financier and Registering Authority simultaneously
on making the termination entry in the certificate of Registration and Form 24)
To
The Registering Authority,
…………………………….
…………………………….
We hereby declare that the agreement of hire-purchase/lease/hypothecation entered into between us has been
terminated. We, therefore, request that the note endorsed in the Certificate of Registration of
vehicle No……………........................................in respect of the said agreement between us be cancelled.
The Certificate of Registration together with the fee is enclosed.
Date………………………………. Signature or thumb impression of the Registered Owner
Date…………………………….. Signature of the Financier with official seal and address
Strike out whichever is inapplicable.
OFFICE ENDORSEMENT
Ref. Number…………………………………… Office of the………………………………………………………..
The cancellation of the entry of an agreement as requested above is recorded in this office Registration record in Form
24 and Registration Certificate on………………………………….(date).
Date…………………………. Signature of the Registering Authority
To
The Financier…………………………………………………………………………………………………………
The Registering Authority……………………………………………………………………………………………
(To be sent to both the above parties by Registered Post Acknowledgment Due)
Specimen signature of the Financier are to be obtained in original Application for affixing and attestation by the
Registering Authority with his office seal in Form 23 and 24 in such a manner that the part of impression of seal or
stamp and attestation shall fall upon each signatures.
Specimen signatures of the Financier
1………………………………………. 2………………………………………..
304
FORM 36
[See Rule 61 (2)]
APPLICATION FOR ISSUE OF A FRESH CERTIFICATE OF REGISTRATION IN THE
NAME OF THE FINANCIER
To
The Registering Authority,
……………………………..
……………………………..
I/We…………………………………………………………………………………………………
……………………………………………………………………………………………………(financier)
have taken possession of motor vehicle no………………………………..make…………………………...
model………………………………………….owing to the default of the registered owner……………….
………………………………………………………..(name) ……………………………………………
………………………………………………………………………………………………………………
…………………………………………………………………………………………..(full address) under
the provisions of the agreement of hire-purchase/lease/hypothecation:
*(1) The certificate of registration of the said vehicle is surrendered herewith.
*(2) The registered owner has refused to deliver the certificate of registration to me/us.
*(3) The registered owner is absconding.
I/We request you to cancel the certificate and issue a fresh certificate of registration in my/our name.
I/We enclose a fee of Rs……………………………………………….
Date………………………….. Signature of the Financier
Specimen signature of the Financier:
1……………………………………..
2……………………………………...
Copy to the original Registering Authority
*Strike out whichever is inapplicable.
305
FORM 37
[See Rule 61(3)]
NOTICE TO THE REGISTERED OWNER OF THE MOTOR VEHICLE TO SURRENDER THE
CERTIFICATE OF REISTRATION FOR CANCELLATION AND ISSUE OF FRESH
REGISTRATION CERTIFICATE IN THE NAME OF THE FINANCIER
(To be made in duplicate and duplicate copy to be sent to the Financier simultaneously on issue of notice)
OFFICE OF THE REGISTERING AUTHORITY……………………………………………………….
Ref. Number………………………………………… Dated…………………………………
Shri. / Smt. / Kumari……...…………………………………………………………………………
………………………………………………………………………………………………. (Regd. Owner)
is/are hereby informed that…………………….…………………………………………………………….
………………………………………………………………………………………………….. (financier)
has/have reported that he/they have taken possession of the motor vehicle bearing registration number
………………………………………………….. covered by an agreement of hire-purchase / lease /
hypothecation, owing to your default under the provisions of the said agreement and that –
*(1) You have refused to deliver the Certificate of Registration to him / her / them.
*(2) You have absconded.
He/She/They have requested to cancel the Certificate of Registration and issue a fresh certificate
of registration in his/her/their name.
You are therefore, directed to surrender the Certificate of Registration of the said motor vehicle
which has been retained by you in spite of your having lost the possession and thereby the ownership of
the motor vehicle under section 2(30) and to send your representation in this regard, if any, to this office
within seven days from the date of receipt of this notice by you, failing which a fresh Certificate of
Registration will be issued in the name of the Financier, cancelling the Certificate of Registration held by
you, in accordance with section 51(5).
Date………………………………. Signature of the Registering Authority
*Strikeout whichever is inapplicable.
To
The Financier ……………………………………………………………………………………………….
……………………………………………………………………………………………………………….
……………………………………………………………………………………………………………….
(To be sent by Registered Post Acknowledgment Due)
306
FORM 38
[See. rule 62 (1)]
CERTIFICATE OF FITNESS (APPLICABLE IN THE CASE OF TRANSPORT VEHICLES
ONLY)
Vehicle No....................................is certified as complying with the provisions of the Motor Vehicles
Act, 1988, and the rules made thereunder. The certificate will expire
on.........................................................
Date.....................................
Signature and designation of Inspecting
Authority or holder of the letter of
authority of the authorised testing
station.
The certificate of fitness is hereby renewed :
From ..................................... to ............................................ 20...
From ..................................... to ............................................ 20...
From ..................................... to ............................................ 20...
Signature of Inspecting Authority
or the holder of the letter of authority
of the authorised testing station.
FORM 39
[See rule 63 (1) and (5)]
307
FORM 39
[See rule 63 (1) and (5)]
FORM OF LETTER OF AUTHORITY ISSUED TO AN AUTHORISED TESTING STATION
Letter of authority No.................................
Dated.............................
The letter of authority is hereby granted to....................................................... (Name and full address) for
the establishment of a testing station under sub-section (2) of Section 56 of the Act at the
premises................................................................................ (Address of the premises in full)
for the purpose of issue and renewal of certificate of fitness to transport vehicles, subject to the provisions
of the Motor Vehicles Act, 1988, and the Central Motor Vehicles Rules, 1989, made thereunder.
This letter of authority is valid from...........................to............................................
Date.........................................
Registering Authority
This letter of authority is renewed from......................to.........................................
Date......................................
Registering Authority
308
FORM 40
[See rule 63 (2)]
APPLICATION FORM FOR GRANT OR RENEWAL OF LETTER OF AUTHORITY
To
The Registering Authority,
.................................................
.................................................
I/We..................... address ..................................................hereby submit the following information, namely:
--
1. Name of the applicant .....................................
2. Son/wife/daughter of .....................................
3. Address (proof to be enclosed) .....................................
4. Qualification of the applicant .....................................
5. Experience in automobile workshop .....................................
6. Whether involved/connected directly .....................................
or indirectly in transport business .....................................
7. Machinery and equipment .....................................
8. Staff engaged in different cadres: -- .....................................
(i) Manager .....................................
(ii) Foreman .....................................
(iii) Mechanic .....................................
(iv) Helpers .....................................
(v) Other administrative staff .....................................
9. Particulars of a person as required under .....................................
clause (a) of sub-rule (3) of Rule 63 of .....................................
the Central Motor Vehicles Rules .....................................
(a) Name .....................................
(b) Age .....................................
(c) Qualification in automobile engineering .....................................
(d) Actual experience in automobile .....................................
Workshop .....................................
(e) Name of firm with full address .....................................
(f) Driving experience of various types .....................................
of transport vehicles -- .....................................
309
(i) Driving licence number .....................................
(ii) Issued by .....................................
(iii) Date of issue .....................................
(iv) Type of vehicle .....................................
(v) Period of validity of driving licence .....................................
(vi) Endorsement on driving licence, .....................................
if any .....................................
10. Proof of land owned by or hired by the .....................................
Applicant .....................................
11. Whether garage is equipped with .....................................
following facilities: -- .....................................
(i) Water supply .....................................
(ii) Electricity .....................................
(iii) Toilet .....................................
(iv) Rest room .....................................
12. Sources of finance .....................................
13. If application is for the renewal of letter .....................................
of authority, furnish following particulars, .....................................
namely: -- .....................................
(i) Number of existing letter of authority .....................................
(ii) Date of issue .....................................
(iii) Period of validity .....................................
(iv) If application is not submitted within .....................................
time, state the reasons
(v) Whether letter of authority suspended/ .....................................
cancelled/ surrendered earlier. Further .....................................
Details .....................................
14. I hereby solemnly declare that the information given above is true and correct. Further, I hereby declare
that I shall abide by the rules, regulations and conditions attached to the letter of authority and as prescribed
in the Motor Vehicles Act, 1988, and the Central Motor Vehicles Rules, 1989.
Dated........................................
Signature of the Applicant
310
FORM 41
[See rule 75]
STATE REGISTER OF MOTOR VEHICLES
1. Registration No. .....................................
2. Previous registration number, if any .....................................
3. Whether the motor vehicle is -- .....................................
(a) new vehicle .....................................
(b) imported vehicle .....................................
(c) ex-army vehicle .....................................
4. Maker's name .....................................
5. Year of manufacture .....................................
6. Engine number or motor number in the case of Battery Operated
Vehicles
.....................................
7. Chassis No. .....................................
8. Number of cylinders .....................................
9. Cubic capacity/horse power .....................................
10. Type of fuel used .....................................
11. Class of motor vehicle .....................................
12. Name and full address of the .....................................
registered owner .....................................
13. Seating capacity .....................................
14. Gross vehicle weight .....................................
15. Unladen weight .....................................
311
FORM 42
[See Rule 76(1)]
FORM OF APPLICATION FOR REGISTRATION OF MOTOR VEHICLE BY OR ON BEHALF
OF A DIPLOMATIC/CONSULAR OFFICER
(To be forwarded through the competent authority in triplicate)
To
The Registering Authority,
…………………………….
…………………………….
1. Full name, designation and address of
the diplomatic officer / consular
officer/ full name, address and station
of the diplomatic mission/consular
office or post
: ……………………………………………………………..
…………………………………………………………….
…………………………………………………………….
……………………………………………………………..
…………………………………………………………….
2. Age of the person to be registered as
registered owner
: …………………………………………………………….
3. Name and address of the person from
whom the vehicle was purchased /
name of the port through which the
vehicle was imported / name of the
person or company from whose
bonded stocks the vehicle was
purchased and the name of the port
: ……………………………………………………………..
…………………………………………………………….
……………………………………………………………..
……………………………………………………………..
…………………………………………………………….
4. Country from which imported : ……………………………………………………………..
5. Class of vehicle : …………………………………………………………….
6. Type of body : …………………………………………………………….
7. Maker’s name : …………………………………………………………….
8. Year of manufacture : ……………………………………………………………..
9. Number of cylinders : ……………………………………………………………..
10. Horse power : …………………………………………………………….
11. Maker’s classification or if not
known, wheel base
: ……………………………………………………………...
12. Chassis No. : ……………………………………………………………..
13. Engine number or motor number in
the case of Battery Operated Vehicles
: ……………………………………………………………...
14. Seating capacity (including driver) : ……………………………………………………………..
15. Unladen weight : ……………………………………………………………..
312
16. Particulars of previous registration
and registered number (if any)
: ……………………………………………………………..
……………………………………………………………..
17. I hereby declare that the vehicle has
not been registered in any other State
in India
: …………………………………………………………….
18. Colour of colours of body, wings and
front end
: ……………………………………………………………..
…………………………………………………………….
19. Number, description and size of tyres
(a) Front axle
(b) Rear axle
(c) Any other axle
:
:
:
……………………………………………………………..
……………………………………………………………..
……………………………………………………………..
20. Maximum laden weight : …………………………………………………………Kgs
21. Maximum axle weight (To be
furnished in the case of heavy motor
vehicles only):-
(a) Front axle
(b) Rear axle
(c) Any other axle
:
:
:
…………………………………………………………Kgs
…………………………………………………………Kgs
…………………………………………………………Kgs
The above particulars are to be filled in for a rigid frame motor vehicle of two or more axles.
Signature of the Applicant
For use in the Ministry of External Affairs (Protocol Division) or in the Office of the Chief Secretary of
the State Government concerned
Certified that………………………………………………………………………...(name and designation)
is a diplomatic officer/consular officer recognized by the Government of India and that he/she is not
entitled to exemption from payment of registration fees.
Place……………………………. Signature of the officer…………………………………………
Date……………………………. Designation……………………………………………………..
313
FORM 43
[See rule 76 (4)]
CERTIFICATE OF REGISTRATION OF A MOTOR VEHICLE BELONGING
TO A DIPLOMATIC OR CONSULAR OFFICER
Registered No............................................
Brief description of vehicle, (e.g. Fiat 1100 or Hindustan Landmaster car, Willys jeep,
Dodge/Desoto/Gadga petrol/diesel truck, Leyland 36-seater diesel bus, trailer, etc.),
Full name, designation and address of the diplomatic officer/consular officer/ full name, address and
station of the diplomatic mission/consular officer or post............................................
Transferred to...................................
………………………………………………….
Signature of the Registering Authority
DETAILED DESCRIPTION
1. Class of vehicle .....................................
2. Maker's name .....................................
3. Type of body .....................................
4. Year of manufacture .....................................
5. Number of cylinders .....................................
6. Chassis number .....................................
7. Engine number or motor number in the case of Battery Operated
Vehicles
.....................................
8. Horse power .....................................
9. Maker's classification, or if not .....................................
known, wheel base. .....................................
10. Seating capacity (including driver) .....................................
11. Unladen weight .....................................
ADDITIONAL PARTICULARS IN THE CASE OF ALL TRANSPORT VEHICLES
12. Colour or colours of body, wings .....................................
and front end .....................................
13. Registered laden weight .....................................
14. Number, description and size of tyres- .....................................
(a) Front axle .....................................
(b) Rear axle .....................................
(c) Any other axle .....................................
15. Registered axle weight (in the case of .....................................
314
heavy motor vehicles only): -- .....................................
(a) Front axle ....................... .......................Kgs.
(b) Rear axle ............................................Kgs.
(c) Any other axle ..............................................Kgs.
Date ...............................................20 Signature of Registering
Authority
315
FORM 44
[See Rule 78(1)]
INTIMATION OF CHANGES OF STATE OF RESIDENCE AND APPLICATION FOR
ASSIGNMENT OF FRESH REGISTRATION MARK BY OR ON BEHALF OF A DIPLOMATIC
OR CONSULAR OFFICER
(To be submitted in triplicate)
To
The Registering Authority,
………………………….
………………………….
I…………………………………………………………………………………………………..
(name and designation) of the………….……………………………………………………………………
being the owner of ……………………………………………...motor vehicle No…………………………
registered at……………………………………………………under section 42 of the Motor Vehicles Act,
1988, hereby declare that I have, since the………………….day of………………………………..20….
kept the said vehicle in the State of………………………………………………………. and hereby apply
for the assignment to the motor vehicle of a fresh registration mark.
I enclose the certificate of registration and the certificate of fitness* of the vehicle.
Date……………………… Signature of the owner
*Strike out the words “and the certificate of fitness” if inapplicable.
For use in the Ministry of External Affairs (Protocol Division) or in the Office of the Chief Secretary of
the State Government concerned
Certified that………………………………………………………………………(name and designation)
continues to hold the status of a Diplomatic Officer/Consular Officer. He/She is at present stationed at
……………………………………………………………………………………………………………….
Place……………………………. Designation……………………………………..
Date……………………………. Signature of the Officer…………………………
316
FORM 45
[See Rule 82(1)]
APPLICATION FOR GRANT OF PERMIT IN RESPECT OF TOURIST VEHICLE
To
The State Transport Authority,
……………………………….
……………………………….
I/We the undersigned hereby apply for the grant of permit for tourist vehicle valid throughout the
territory of India/in the State of………………………………………………………………………………
……………………………………………………………………………(specify the names of the States)
1. Name of the applicant(s) in full : ……………………………………………………………..
2. Status of the applicant, whether
individual, company or partnership
firm, co-operative society, etc.
: …………………………………………………………….
3. Name of father or husband (in case of
individual and in case of firm or
company the particulars of managing
partner or managing director, as the case
may be)
: ……………………………………………………………..
……………………………………………………………..
……………………………………………………………..
…………………………………………………………….
4. Full address (To be supported by
attested copy of ration card, electricity
bill, etc. in case of individual or any
other valid documentary proof to the
satisfaction of State Transport Authority
and in case of company or firm, certified
copy of the Memorandum of Association
or copy of partnership deed)
: …………………………………………………………….
……………………………………………………………
……………………………………………………………
…………………………………………………………….
……………………………………………………………..
5. (a) Whether the applicant himself
intends to drive the vehicle?
(b) If so, whether the applicant holds
(i) Heavy passenger motor vehicle
driving licence
(ii) The number, date and validity
period of driving licence
(iii) Name and address of the
licencing authority
:
:
:
:
…………………………………………………………….
…………………………………………………………….
…………………………………………………………….
……………………………………………………………
……………………………………………………………
…………………………………………………………….
6. Registration certificate along with
the date of first registration,
insurance certificate number
: …………………………………………………………….
……………………………………………………………..
7. Details of other permits, if any, held
in respect of a particular vehicle
: …………………………………………………………….
…………………………………………………………….
317
8. Details of total number of tourist
permits held by the applicant
: ……………………………………………………………..
…………………………………………………………….
9. Type of vehicle : …………………………………………………………….
10. Make of motor vehicle : ……………………………………………………………...
11. Particulars of convictions /
suspensions / cancellation, if any,
during the past three years in respect
of the vehicle / permit held by the
applicant(s)
: ……………………………………………………………..
………………………………………………………………
……………………………………………………………..
…………………………………………………………….
12. I/We forward herewith the certificate
of Registration of the vehicle or
I/We will produce the certificate of
Registration of the vehicle before the
permits are issued
: ……………………………………………………………..
13. I/We hereby declare that the above
statements are true and that I/We
am/are resident(s) of this State
having principal place of business in
this State at………………………….
……………………………………...
: ……………………………………………………………..
14. I/We have paid the fee of Rs. : ……………………………………………………………..
Date……………………………. Signature or thumb impression of the Applicant
318
Sl.No. Name of the States Amount paid
(1) (2) (3)
FORM 46
[See Rules 83(1) and 87(1)]
FORM OF APPLICATION FOR GRANT OF AUTHORISATION FOR
TOURIST PERMIT OR NATIONAL PERMIT
To
The Regional/State Transport Authority,
………………………………………….
I/We the undersigned hereby apply for the grant of authorization valid throughout the territory of India/in the State
of……………………………..………………………………………………………………………………………..
…………………………………………………………………………….(specify the names of the States)
1. Name of the applicant(s) in full : ………………………………………………………………………
2. Son/Wife/Daughter of : ……………………………………………………………………..
3. Address : ……………………………………………………………………..
……………………………………………………………………..
……………………………………………………………………..
……………………………………………………………………..
4. Registration mark and year of manufacture
and date of registration of the motor vehicle
5. Engine number or motor number in the case
of Battery Operated Vehicles
: ……………………………………………………………………..
……………………………………………………………………..
: ……………………………………………………………………….
6. Chassis number of the motor vehicle : ……………………………………………………………………..
7. Permit number, the authority which had
issued the permit and date of issue and date
of expiry of the permit
: ……………………………………………………………………..
…………………………………………………………………….
8. Unladen weight of the motor vehicle : ……………………………………………………………………..
9. Gross weight of the motor vehicle : ……………………………………………………………………..
10. Pay load of the motor vehicle (seating
capacity in the case of tourist vehicle)
: ……………………………………………………………………..
11. Period for which the authorization is sought : …………………………………………………………………….
12. I/We enclose the certificate of registration
and permit of the vehicle
13. (a) For Tourist permit:
I/We enclose bank draft(s) as described
hereunder towards payment of the
authorization fee
: ……………………………………………………………………..
: ………………………………………………………………………
Particulars of band draft(s) Date of payment
(4) (5)
(b) For National Permit:
I/we enclose the receipt towards payment of Rs. 16500/- as consolidated fee for National Permit.
Date…………………………….. Signature or thumb impression of the Applicant(s)
319
FORM 47
[See rules 83(2) and 87(2)]
AUTHORISATION FOR TOURIST PERMIT OR NATIONAL PERMIT
No.......................................
Office of the Secretary, Regional/State Transport Authority
Authorisation No.......................................
Dated.......................................
This authorisation is valid throughout the territory of India/in the State(s) of:--
1. ...................................................... 2. ......................................................
3. ...................................................... 4. ......................................................
5. ...................................................... 6. ......................................................
7. ...................................................... 8. ......................................................
9. ...................................................... 10. ......................................................
(Here write the names of the States applicable)
1. Name in full and complete address of holder of the ............................................................
permit
2. Registration mark of the motor vehicle and make ............................................................
3. Year of manufacture ............................................................
4. [Engine number or motor number in the case of ............................................................
Battery Operated Vehicles] of the motor vehicle
5. Chassis number of the motor vehicle ............................................................
6. Permit number of the motor vehicle ............................................................
7. Name of the permit issuing authority ............................................................
8. Date of expiry of the permit ............................................................
9. Gross weight of the motor vehicle ............................................................
10. Unladen weight of the motor vehicle ............................................................
11. Seating capacity in the case of tourist vehicle ............................................................
12. Period of validity of the authorization From.. ............... ...To. .................
13 The authorisation for the following State(s) is
subject to payment of taxes by the permit holder to
the respective State(s)
320
1.
2.
3.
4.
Signature and designation with seal of the Transport Authority
Certificate of payment of composite fee/taxes (for tourist permit)
Sl.
No.
Name of the
States for which
payment made
Amount
paid Rs.
P.
No. and date
of bank draft
and name of
bank
Date of
receipt of
bank draft
Payable
to
Period
for which
paid
Registration
mark of the
vehicle
Signature and
seal of the
authority
1 2 3 4 5 6 7 8 9
Certified that the National Permit holder has paid the consolidated fee of Rs. 16500/- vide
receipt No………….dated……………………..
Signature and seal of the Transport Authority
[Note.--This Form shall be security printed water-mark paper and shall carry such hologram emblem, as
may be specified by the State Government.]
321
1. Name of the applicant(s) in full : ……………………………………………………………..
2. Status of the applicant, whether
individual, company or partnership
firm, co-operative society, etc.
: …………………………………………………………….
3. Name of father or husband (in case of
individual and in case of firm or
company the particulars of managing
partner or managing director, as the case
may be)
: ……………………………………………………………..
……………………………………………………………..
……………………………………………………………..
…………………………………………………………….
4. Full address (To be supported by
attested copy of ration card, electricity
bill, etc. in case of individual or any
other valid documentary proof to the
satisfaction of State Transport Authority
/ Regional Transport Authority and in
case of company or firm, certified copy
of the Memorandum of Association or
copy of the deed of partnership, as the
case may be)
: …………………………………………………………….
……………………………………………………………
……………………………………………………………
…………………………………………………………….
……………………………………………………………..
……………………………………………………………..
5. (a) Whether the applicant himself
intends to drive the vehicle?
(b) (i) If so, whether the applicant
holds heavy passenger motor
vehicle driving licence
(ii) The number, date and validity
period of driving licence
(iii) Name and address of the
licencing authority
:
:
:
:
…………………………………………………………….
…………………………………………………………….
…………………………………………………………….
……………………………………………………………
……………………………………………………………
…………………………………………………………….
6. Registration certificate along with
the date of first registration,
insurance certificate number
: …………………………………………………………….
……………………………………………………………..
FORM 48
[See Rule 86]
APPLICATION FOR THE GRANT OF NATIONAL PERMIT
To
The Regional / State Transport Authority,
…………………………………………..
………………………………………….
I/We the undersigned hereby apply for the grant of permit for tourist vehicle valid throughout the
territory of India/in the State of………………………………………………………………………………
……………………………………………………………………………………………………………….
(here write the names of the States desired)
322
7. Details of other permits if held in
respect of a particular vehicle
: …………………………………………………………….
…………………………………………………………….
8. Details of number of national
permits held by the applicant
: ……………………………………………………………..
…………………………………………………………….
9. Type of vehicle, whether two-axle
truck or articulated vehicle or multi-
axle vehicle or tractor-trailer
combination
: …………………………………………………………….
10. Make of motor vehicle : ……………………………………………………………...
11. Particulars of convictions /
suspensions / cancellation, if any,
during the past three years in respect
of the vehicle / permit held by the
applicant(s)
: ……………………………………………………………..
………………………………………………………………
……………………………………………………………..
…………………………………………………………….
12. I/We forward herewith the certificate
of Registration of the vehicle or
I/We will produce the certificate of
Registration of the vehicle before the
permits are issued
: ……………………………………………………………..
13. I/We hereby declare that the above
statements are true and that I/We
am/are resident(s) of this State
having principal place of business in
this State at………………………….
……………………………………...
: ……………………………………………………………..
14. I/We have paid the fee of Rs. : ……………………………………………………………..
Date……………………………. Signature or thumb impression of the Applicant
323
FORM 50
[See Rule 90(3)]
BILL OF LADING
Bill No……………………………… Dated…………………………….
Name and address of the national permit
holder
: ……………………………………………………………..
……………………………………………………………...
……………………………………………………………..
………………………………………………………………
Registration number of the motor vehicle : ………………………………………………………………
Dated………………………………………………………..
Name of the consignor : ……………………………………………………………….
Name of the consignee : ……………………………………………………………….
Point of origin : ……………………………………………………………….
Point of destination : ………………………………………………………………
Number of articles
Description of goods
Kg.
Freight charges
paid
Rs. P.
Freight charges to
pay
Rs. P.
Total
Bill No………………………….…………………
Dated………………………………………………
Received…………………………………………..
Package…………………………………………...
From………………………………………………
(Truck No…………………………………………)
Signature of Consignee
Signature of Consignor
*At carrier’s risk
At owner’s risk
Value of the goods Rs……………………………………………..
Delivery at…………………………………………………………
Signature of the Carrier
Note. – The bill of lading shall be in the proforma given above and shall be in quadruplicate, the original (white) to be
carried in the motor vehicle, the duplicate (light green) for the consignor, the triplicate (pink) for the consignee and the
fourth copy (cream yellow) for record of the national permit holder.
*Strike out whichever is inapplicable.
324
FORM 51
[See rule 141]
Certificate of insurance in respect of ..................................................................
Certificate No................................... Policy No.....................................
1. Registration mark of the vehicle insured .......................................................
2. Description of the vehicle .......................................................
3. Make and year of manufacture .......................................................
4. [Engine number or motor number in the case of
Battery Operated Vehicles]
.......................................................
Chassis number .......................................................
5. Carrying capacity .......................................................
6. Name and address of the insured .......................................................
7. Effective date and time of commencement of
insurance
.......................................................
8. Date of expiry of insurance .......................................................
9. Persons or classes of persons entitled to drive: -- .......................................................
Stage carriage/contract Any person including insured :
carriage/private service vehicle Provided that a person driving holds an effective
driving licence at the time of the accident and is not
disqualified from holding or obtaining such a licence:
Provided also that the person holding an effective
learner's licence may also drive the vehicle when not
used for the transport of passengers at the time of the
accident and that such a person satisfies the
requirements of Rule 3 of the Central Motor Vehicles
Rules, 1989.
Goods carriage Any person including insured:
Provided that a person driving holds an effective
driving licence at the time of the accident and is not
disqualified from holding or obtaining such a licence:
Provided also that the person holding an effective
learner's licence may also drive the vehicle when not
used for the transport of goods at the time of the
accident and that such a person satisfies the
requirements of Rule 3 of the Central Motor Vehicles
Rules, 1989.
Non-transport vehicles Any person including insured :
325
Provided that a person driving holds an effective
driving licence at the time of the accident and is not
disqualified from holding or obtaining such a licence
:
Provided also that the person holding an effective
learner's licence may also drive the vehicle and that
such a person satisfies the requirements of Rule 3 of
the Central Motor Vehicles Rules, 1989.
10. Limitations as to use: .
Stage carriage/contract carriage/goods The policy covers use only under a permit within the
carriage/private service
vehicle
meaning of the Motor Vehicles Act, 1988, or such a
carriage falling under sub-section (3) of section 66 of the
Motor Vehicles Act, 1988.
The policy does not cover use for --
(a) organized racing, or
(b) speed testing.
11. Private service vehicle and non-transport vehicle The policy covers use for any purpose other than --
(a) hire or reward,
(b) organized racing, or
(c) speed testing.
We hereby certify that the policy to which this certificate relates as well as this certificate of insurance are
issued in accordance with the provisions of Chapter X or XI of the Motor Vehicles Act, 1988.
Authorised Insurer
326
FORM 52
[See rule 42 (1)]
COVER NOTE
1. Registration mark, number ................................................
and description of the vehicle
insured
2. Name and address of insured ................................................
3. Effective date and time of commencement of insurance for ..............................................
the purpose of this Act.
4. Date of expiry of insurance ................................................
5. Persons or classes of persons entitled to drive ................................................
6. Any limitations as to use of motor vehicle ................................................
7. The period of validity of this cover note will expire on ................................................
I/We hereby certify that this cover note is issued in accordance with the provisions of
Chapter XI of the Motor Vehicles Act, 1988.
……………………..
Authorised Insurer
327
FORM 53
[See rule 148 (1)]
CERTIFICATE IN RESPECT OF EXEMPTION OF MOTOR VEHICLE FROM
INSURANCE
Certified that the motor vehicles of the following description:
(a) Registration number .....................................................
(b) Make .....................................................
(c) Class, i.e. motorcycle, motor car, stage carriage,
goods carriage, contract carriage or other class (to
be described).....................................................
(d) Colour of body .....................................................
Is the property of -- .....................................................
(i) the Government of .....................................................
(ii) the local authority/State transport undertaking, namely..................................
the vehicles of which have been exempted under section 146 of the Motor Vehicles Act,
1988, by the Government of.................................................by their order No. ............................
dated......................
This certificate is valid up to.......................................unless cancelled in the meanwhile.
Dated........................................
Signed on behalf of......................................
Designation : ......................
328
FORM 54
[See rule 150 (1) and (2)]
ACCIDENT INFORMATION REPORT
1. Name of the police station ......................................................................
2. CR No./Traffic accident report ......................................................................
3. Date, time and place of the accident ......................................................................
4. Name and full address of the .......................................................................
injured/deceased .......................................................................
5. Name of the hospital to which he/she .......................................................................
was removed
6. Registration number of vehicle and ......................................................................
the type of the vehicle
7. Driving licence particulars: .....................................................................
(a) Name and address of the driver .....................................................................
(b) Driving licence number and date .....................................................................
of expiry
(c) Address of the issuing authority ......................................................................
(d) Badge No. in case of public ......................................................................
service vehicle
8. Name and address of the owner of
the vehicle at the time of the accident ......................................................................
9. Name and address of the insurance ........................................................................
company with whom the vehicle
was insured and the particulars of
the Divisional Officer of the said
insurance company
10. Number of insurance ........................................................................
policy/insurance certificate and the
date of validity of the insurance
policy/insurance certificate
11. Registration particulars of the .........................................................................
vehicle (class of vehicles)
(a) Registration No. ........................................................................
(b) [Engine number or motor ........................................................................
number in the case of Battery
Operated Vehicles]
(c) Chassis No. .......................................................................
12. Route permit particulars .....................................................................
329
13. Action taken, if any, and the result .......................................................................
thereof
330
FORM 55
[See rule 160(1)] APPLICATION FOR THE APPROVAL OF A FOREIGN INSURER
I/We hereby apply for the inclusion of................................. of................................ (Name of
foreign insurer) constituted/incorporated/domiciled at................................ in the approved list
maintained under Rule 159 of the Central Motor Vehicles Rules, 1989, of the Central
Government and for the inclusion of my/our name as the guarantor of the
said.................................................(name of foreign insurer) for the purpose of Chapter XI of the
Motor Vehicles Act, 1988, and the said Rules. I/We hereby certify that I/We have entered into an
arrangement for the purposes of the said Act and the said Rules with the said foreign insurer and
I/We hereby agree to act as guarantor in India in respect of the said foreign insurer for the
purposes of the said Act and the said Rules.
Dated..... ............ ...................... Signature of Authorised
Insurer
Address.........................................................
331
FORM 56
[See rule 160 (3)]
NOTICE TO CEASE TO ACT AS GUARANTOR
This is to give notice that I/We desire to cease acting as guarantors in India
of....................................................................of......................................(Name of foreign insurer)
after...........................................or from..............................................the expiry of two (Address of
foreign insurer) months from the date on which this notice is delivered to the Central
Government, whichever is later, for the purposes of Chapter XI of the Motor Vehicles Act, 1988,
and the Central Motor Vehicles Rules, 1989.
Dated the...................................day of.........................................20........
Authorised Insurer
332
FORM 57
[See rules 140 (v) and 161 (1)]
CERTIFICATE FOR FOREIGN INSURANCE
Certificate No............................... Policy No................. ................(Optional)
1. Name and address of approved foreign insurer .........................................................
2. Name and address of guarantor .........................................................
3. Registration mark and number of the motor vehicle .........................................................
4. Name and address of visitor .........................................................
5. Date of commencement of the policy .........................................................
6. Dale of expiry of the policy .........................................................
7. Persons or classes of persons entitled to drive in India .........................................................
8. Any limitations as to use of motor vehicle in India .........................................................
9. Particulars of any other vehicle(s) .........................................................
which the foreign visitor is entitled to
drive in India and any limitations as to
use of such vehicle in India.
I/We hereby certify that this certificate of foreign insurance has been issued in
accordance with the provisions of Chapter XI of the Motor Vehicles Act, 1988, and the Central
Motor Vehicles Rules, 1989.
Signature of the approved Foreign Insurer
333
FORM 58
[See rule 161 (2)]
ENDORSEMENT ON CERTIFICATE OF FOREIGN INSURANCE
Certified that, I have today examined this certificate of foreign insurance and that I am
satisfied that this certificate complies with the requirements of Chapter XI of the Motor Vehicles
Act, 1988, and the Central Motor Vehicles Rules, 1989.
The period of validity of this endorsement will expire on.........................unless cancelled
before the expiry of the period of its validity in accordance with the provisions of the Motor
Vehicles Act and Rules made thereunder.
Date...........................
Signature and designation of competent authority
The period of validity of this endorsement is hereby renewed--
Up to
Up to
Up to
Unless cancelled in the meanwhile.
(Signature and designation of Competent Authority)
334
1[ANNEXURE I
[See sub-rule 115 (3)]
MASS EMISSION STANDARDS FOR PETROL DRIVEN VEHICLES
1. Type approved Tests:
Two and three-wheeler vehicles:
Reference Mass, R (Kg) CO (g/km) HC (g/km)
(1) (2) (3)
R • 150 12 8
150 R • 350
R > 350 30 12
Light duty vehicles :
Reference Mass, rw (kg) CO (g/km) HC (g/km)
(1) (2) (3)
rw 1020 14.3 2.0
1020 • rw 1250 16.5 2.1
1250 • rw 1470 18.8 2.1
1470 • rw 1700 20.7 2.3
1700 • rw 1930 22.9 2.5
1930 • rw 2150 24.9 2.7
rw > 2150 27.1 2.9
2. Conformity to Production Tests :
Two and three-wheeler vehicles :
Reference Mass, R(kg) CO(g/km) HC(g/km)
(1) (2) (3)
R 150 15 10
150 • R • 350
R > 350 40 15
1. Subs. by G.S.R. 338 (E), dated 26th March, 1993 (w.e.f. 26-3-1993).
335
Light duty vehicles :
Reference Mass, rw (kg) CO(g/km) HC(g/km)
(1) (2) (3)
rw 1020 17.3 2.7
1020 • rw • 1250 19.7 2.7
1250 • rw • 1470 22.5 2.8
1470 • rw • 1700 24.9 3.0
1700 • rw • 1930 27.6 3.3
1930 • rw • 2150 29.9 3.5
rw > 2150 32.6 3.7
Explanation.--Mass emission, standards refers to the gm. of pollutants emitted per km. run of the
vehicle, as determined by a chassis dynamometer test using the Indian Driving Cycle.]
ANNEXURE II
[See rule 115 (3)]
BREAKDOWN OF THE OPERATING CYCLE USED FOR THE TEST
No. of operation Acceleration
(m/sec)2
Speed (km/h) Duration of each
operation(s)
Cumulative
time(s)
(1) (2) (3) (4) (5)
01. Idling -- -- 16 16
02. Acceleration 0.65 0--14 6 22
03. Acceleration 0.56 14--22 4 26
04. Deceleration -0.63 22--13 4 30
05. Steady speed -- 13 2 32
06. Acceleration 0.56 13--23 5 37
07. Acceleration 0.44 23--31 5 42
08. Deceleration -0.56 31--25 3 45
09. Steady speed -- 25 4 49
10. Deceleration -0.56 25--21 2 51
11. Acceleration 0.45 21--34 8 59
12. Acceleration 0.32 34--42 7 66
13. Deceleration -0.46 42--37 3 69
14. Steady speed -- 37 7 76
336
15. Deceleration -0.42 1[37--34] 2 78
16. Acceleration 0.32 34--42 7 85
17. Deceleration -0.46 42--47 9 94
18. Deceleration -0.52 27--14 7 101
19. Deceleration -0.56 14--0 7 103
ANEXURE III
[See rule 115 (3)]
REFERENCE FUEL FOR TYPE AND PRODUCTION CONFORMITY
TESTS
Serial
No.
Characteristic Requirements Method of test (ref.
of P : or (IS :
1448)* 87 octane 93 octane
(1) (2) (3) (4) (5)
1. Colour, visual Orange Red --
2. Copper-strip corrosion for 3 hours at
50C.
Not worse than No. 1. P : 15 (1968)
3. Density at 15C. Not limited but to be reported. P : 16 (1967)
4. Distillation --
(a) Initial boiling point Not limited but
to be reported
P : 18 (1967)
(b) Recovery up to 20C per cent. by
volume, min.
10 10
(c) Recovery up to 125C per cent. by 50 50
volume, min.
(d) Recovery up to 130C per cent. by
volume min
90 90
(e) Final boiling point max. 215C 215C
(f) Residue per cent. by volume max. 2 2
5. Octane number (research methods,
max
87 94 P : 27 (1960)
6. Oxidation stability, in minutes, 360 360 P : 28 (1966)
7. Residue on evaporation mg/ 100 ml
max
4.0 4.0 (Air-jet solvent
h d) 8. Sulphur, total, per cent. by weight,
ma
0.25 0.20 P : 34 (1966)
9. Lead content (as Pb)g/1 max. 0.56 0.80 P : 37 (1967) or P :
38 (1969)
337
10 Reid vapour pressure at 38 degree C,
kgf/cm.3 max.
0.70 0.70 P : 39 (1967)
* Method of test for petroleum and its products
ANNEXURE IV
[See rule 115 (4)]
LIMIT VALUES OF EXHAUST GAS OPACITY APPLICABLE FOR DIESEL DRIVEN
VEHICLES
The engine tests at steady speed
Nominal flow
G(1/s)
Absorption Coefficient
1[K(1/m)]
Nominal flow
G(1/s)
Absorption Coefficient
1[K(1/m)]
(1) (2) (3) (4)
42 2.00 120 1.20
45 1.91 125 1.17
50 1.82 130 1.15
55 1.75 135 1[1.13]
60 1.68 140 1.11
65 1.61 145 1.09
70 1.56 150 1.07
75 1.50 155 1.05
80 1.46 160 1.04
85 1.41 165 1.02
90 1.38 170 1.01
95 1.34 175 1.00
100 1.31 180 0.99
105 1.27 185 0.97
110 1.25 190 0.95
115 1.22 195 0.95
<200 0.93
2[The above standards shall not be applicable to agricultural tractors and the same for the
agricultural tractors shall be notified at a later date.]
_________________________________________
1. Subs. by G.S.R. 338 (E), dated 26th March, 1993 (w.e.f. 26-3-1993).
2. Added by G.S.R. 338 (E), dated 26th March, 1993 (w.e.f. 26-3-1993).
338
1[ANNEXURE IVA
[See rule 115 (5)]
TEST CYCLE
The following 13-mode cycle shall be followed in dynamometer operation on the test engine:--
Mode No. Engine Speed %Load
(1) (2) (3)
1. Idle --
2. Intermediate 10
3. 25
4. Intermediate 50
5. 75
6. 100
7. Idle --
8. Rated 100
9. Rated 75
10. 50
11. 25
12. 10
13. Idle --]
_________________________________________
1. Ins. by G.S.R. 338 (E), dated 26th March, 1993 (w.e.f. 26-3-1993).
339
1[ANNEXURE IVB
[See rule 115 (10)]
DRIVING CYCLES AND COLD START
A. For all 2 and 3 Wheelers except diesel
vehicles: Cold Start Procedures:
Test Cell Condition
Soak Temperature 20-30 C
Soak Period 6-30 hrs
Preparatory running before sampling Idling of 40 seconds and 4 cycles
Number of test cycles 6
Break down of cycles Indian Driving Cycle as per
Annexure II to principal rules.
B. For all other vehicles including diesel 2, 3 and 4
Wheelers: Cold Start Procedures:
Soak Temperature 20-30 C
Soak Period 6-30 hrs
Preparatory running before sampling Idling of 40 seconds '
Number of test cycles* 4 cycles of Part one and 1 cycle of Part two
Break down of cycles* Modified Indian Driving Cycle as per Tables I
and II.
*For diesel 2 & 3
wheelers Number of
test cycles--6
Break down of cycles--Indian Driving Cycles as per Annexure II to principal rules
340
MODIFIED INDIAN DRIVING CYCLE FOR YEAR 2000
Table--I: Operating cycle on the Chassis Dynamometer (Part one)
No. of
Opera-
Operation Phase Accelera-
tion (m/s2)
Speed
(Km/h)
Duration of each Cumula-
tive time
Gear to be used in
the case of manual
tion (s) gear box
Opera-
tion
(s)
Phase
(s)
1. Idling 1 11 11 11 6SPM+5SK1 (*)
2. Acceleration 2 1.04 0.15 4 4 15 1
3. Steady Speed 3 15 8 8 23 1
4. Deceleration 4 -0.69 15-10 2 5 25 1
5. Deceleration
, Clutch
disengaged
4 -0.92 10-0 3 5 28 K1(*)
6. Idling 5 21 21 49 16s PM + SsK1(*)
7. Acceleration 6 0.83 0-15 5 12 54 1
8. Gear Change 6 2 2 12 56
9. Acceleration 6 0.94 15-32 5 12 61 2
10. Steady Speed 7 32 24 24 85 2
11. Deceleration 8 -0.75 32-10 8 11 93 2
12. Deceleration,
Clutch
disengaged
8 -0.92 10-0 3 11 96 K2(*)
13. Idling 9 21 21 117 16s PM + 5sK1(*)
14. Acceleration 10 0.83 0-15 5 26 122 1
15. Gear Change 10 2 26 124
16. Acceleration 10 0.62 15-35 9 26 133 2
17. Gear Change 10 2 26 135
18. Acceleration 10 -0.52 35-50 8 26 143 3
19. Steady Speed 11 50 12 12 155 3
20. Deceleration 12 -0.52 50-35 8 8 163 3
21. Steady Speed 13 35 13 13 176 3
22. Gear Change 14 2 12 178
23. Deceleration 14 -0.86 31-10 7 12 185 2
341
24. Deceleration,
Clutch
14 -0.92 10.0 3 12 188 K2(*)
(*) PM = gearbox in neutral, clutch engaged.
K1, K2 = first or second gear engaged, clutch disengaged.
MODIFIED INDIAN DRIVING CYCLE FOR YEAR 2000
Table--II: Operating cycle on the Chassis Dynamometer (Part two)
No. of
Opera-
tion
Operation Phase Accelera-
tion (m/s2)
Speed
(Km/h)
Duration of
each
Cumula-
tive time
(s)
Gear to be used in the
case of manual gear box
Opera-
tion
(s)
Phase
(s)
1. Idling 1 20 20 20 K1(*)
2. Acceleration 2 0.83 0-15 5 41 25 1
3. Gear Change 2 2 41 27 -
4. Acceleration 2 0.62 15-35 9 41 36 2
5. Gear Change 2 2 41 38 -
6. Acceleration 2 0.52 35-50 8 41 46 3
7. Gear Change 2 2 41 48 -
8. Acceleration 2 0.43 50-70 13 41 61 4
9. Steady Speed 3 70 50 50 111 5
10. Deceleration 4 -0.69 70-50 8 8 119 4s.5+4s.4
11. Steady Speed 5 50 69 69 188 4
12. Acceleration 6 0.43 50-70 13 13 201 4
13. Steady Speed 7 70 50 50 251 5
14 Acceleration 8 0.24 70-90 24 24 275 5
15. Steady Speed 9 90 83 83 358 5
16. Deceleration 10 -0.69 90-80 4 22 362 5
17. Deceleration 10 -1.04 80-50 8 22 370 5
18. Deceleration 10 -1.39 50-00 10 22 380 K5(*)
19. Idling 11 20 20 400 PM(*)
disengaged
25. Idling 15 7 7 195 7s PM (*)
342
K1, K2 = first or fifth gear engaged, clutch disengaged]
__________________________________
1. Ins. by G.S.R. 493 (E), dated 28th August, 1997 (w.e.f. 1-4-2000). (*) PM = gearbox in neutral,
clutch engaged.
343
1[ANNEXURE IV C
[See rule 115 (10)]
REFERENCE FUEL PETROL
ASTM Method
Minimum Maximum
Research Octane Number 95.0 D2699
Motor Octane Number 85.0 D2700
Density at 15C (kg/1) 0.748 0.762 D1298
Reid Vapour pressure 0.56 bar 0.64 bar D323
Distillation:
Initial boiling point 24C 40C D86
10% vol. Point 42C 58C
50% vol. Point 90C 110C
90% vol. Point 155C 180C
Final boiling point 190C 215C
Residue 2% D86
Hydrocarbon Analysis:
Olefins 20% vol. D1319
Aromatics (including max.
5% Vol.; benzene)* 45% vol. (*) D3606/D2267
Saturates balance D1319
Oxidation Stability 480 minutes D525
Existent Gum 4mg/100 ml D381
Sulphur Content 0.04% mass D1266/D2622/
D2785
Copper Corrosion at 50 C D130
Lead Content 0.005 g/ltr D3237
Phosphorous Content 0.0013 g/ltr D3231
* Addition of oxygenates prohibited.
______________________________________________
1. Ins. by G.S.R. 493 (E), dated 28th August, 1997.
344
1[ANNEXURE IV D
[See rule 115 (10)]
REFERENCE FUEL DIESEL
ASTM Method
Minimum Maximum
(1) (2) (3) (4)
Cetane Number 49 53 D613
Density at 15C (kg/1) 0.835 0.845 D1298
Distillation: D86
50% point 245C
90% point 320C 340C
Final boiling point -- 370C
Flash point 55C D93
CFPP -- (-) 5C EN116 (CEN)
Viscosity at 40 C 2.5 mm2/s 3.5 mm2/s D445
Sulphur content to be reported 0.3% mass D1266/D2622/
D2785
Copper Corrosion 1 D130
Conradson carbon
residue (10% DR) 0.2%mass D189
Ash content 0.01%mass D482
Water content 0.05%mass D95/D1744
Neutralisation
(strong acid) No. 0.20 mg/KOH/g
Oxidation Stability 2.5 mg/100 ml D2274
Additives *
* It must not contain any metallic additives or cetane improver additives.]
______________________________________________
1. Ins. by G.S.R. 493 (E), dated 28th August 1997.
345
1[ANNEXURE IVE
[See rule 115(14)]
DRIVING CYCLES AND COLD START
For Four-Wheeled Vehicles: as described in (A),
(B) and (C) Cold Start Procedure
Soak Temperature 20C-30C
Soak period 6-30 hours
Preparatory running before sampling Nil
Number of test cycles 4 cycles of Part one and one cycle of Part two
Break down of cycles Modified Indian Driving Cycle as per Tables 1 and 2 of
Annexure IVB of sub-rule (10)]
______________________________
1. Ins. by G.S.R. 200 (E), dated 1st April, 2005 (w.e.f. 1-4-2005).
346
1[ANNEXURE IVF
[See rule 115 (14)]
TECHNICAL CHARACTERISTICS OF REFERENCE FUEL PRESCRIBED FOR APPROVAL
TESTS AND TO VERIFY CONFORMITY OF PRODUCTION
Type: Diesel fuel
Parameter Unit Limits(1)
Test method
Minimum Maximum
Cetane Number(2)
52.0 54.0 EN-ISO 5165
Density at 15C Kg/m3
833 837 EN-ISO 3675
Distillation:
-- 50% point C 245 -- EN-ISO 3405
--95% point C 345 350 EN-ISO 3405
-- final boiling point C -- 370 EN-ISO 3405
Flash point c 55 -- EN 22719
CFPP c -- --5 EN 116
Viscosity at 40C Mm2/s 2.5 3.5 EN-ISO 3104
Polycyclic aromatic % m/m 3 6.0 IP 391
Hydrocarbons
Sulphur content(3)
Mg/kg -- 300 Pr. EN-ISO/DIS
14596
Copper corrosion -- 1 EN-ISO 2160
Conradson carbon residue (10%
DR)
%m/m -- 0.2 EN-ISO 10370
Ash content % m/m -- 0.01 EN-ISO 6245
Water content % m/m -- 0.05 EN-ISO 12937
Neutralization MgKOH/g -- 0.02 ASTM D 974-95
(strong acid) number
Oxidation stability(4)
mg/ml -- 0.025 EN-ISO 12205
New and better method for
polycyclic aromatics under
development
%m/m -- -- EN 12916
(1) The value quoted in the specifications are "true values". In establishment of their limit values the
terms of ISO 4259 Petroleum Products - Determination and application of precision data in relation to
methods of test have been applied and in fixing a minimum value, a minimum difference of 2R above
zero has been taken into account, in fixing a maximum and minimum value, the minimum difference is
____________________________________________
1. Ins. by G.S.R. 200 (E), dated 1st April, 2005 (w.e.f. 1-4-2005).
347
4R (R = Reproducibility).
Notwithstanding this measure, which is necessary for technical reasons, the manufacturer of fuels should
nevertheless aim at a zero value where the stipulated maximum value is 2R and at the mean value in the
case of quotations of maximum and minimum limits. Should it be necessary to clarify the questions as to
whether a fuel meets the requirements of the specifications, the terms of ISO 4259 should be applied.
(2) The range of cetane number is not in accordance with the requirements of a minimum range of 4R.
However, in the case of a dispute between fuel supplier and fuel user, the terms of ISO 4259 may be used
to resolve such disputes provided replicate measurements, of sufficient number to achieve the necessary
precision, are made in preference to single determinations.
(3) The actual sulphur content of the fuel used for the Type I test shall be reported.
(4) Even though oxidation stability is controlled, it is likely that shelf life will be limited. Advice should
be sought from the supplier as to storage conditions and life.]
348
1 [ANNEXURE IVG
[See rule 115 (14)]
TECHNICAL CHARACTERISTICS OF REFERENCE FUEL PRESCRIBED FOR APPROVAL TESTS
AND TO VERIFY CONFORMITY OF PRODUCTION
Type: Unleaded petrol
Parameter Unit Limits Test method
Minimum Maximum
Research Octane number,
RON
95.0 - EN 25164
Motor Octane number
MON
85.0 - EN 25163
Density at 15 C Kg/m 748 762 ISO 3675
Reid vapour pressure kPa 56.0 60.0 EN 12
Distillation:
Initial boiling point
Evaporated at 100 C
Evaporated at 150 C
Final boiling point
C
% v/v
% v/v
C
24
49.0
81.0
190
40
57.0
87.0
215
EN-ISO 3405
EN-ISO 3405
EN-ISO 3405
EN-ISO 3405
Residue % volume - 2 EN-ISO 3405
Hydrocarbon analysis
-olefins
Aromatics
Benzene
Saturates
% v/v
% v/v
% v/v
% v/v
-
28.0
-
-
10
40.0
1.0
Balance
ASTM D1319
ASTMD1319
Pr, EN 12177
ASTM D1319
Carbon/hydrogen ration Report Report
Oxidation Stability Minutes 480 - EN-ISO-7536
Oxygen content % m/m - 2.3 EN 1601
Existent gum Mg/m - 0.04 EN-ISO 6246
349
Sulphur content Mg/kg - 100 Pr. EN ISO/DIS 14596
Copper corrosion for 3
hours at 50 C
- 1 EN-ISO 2160
Lead content Mg/1 - 103 ASTM D 3231
(1) The values quoted in the specification are “true values”. In establishment of their limit values the terms of
ISO 4259 “ Petroleum products- Determination and application of precision data in relation to methods of
test’ have been applied and in fixing a minimum value, a minimum difference of 2R above zero has been
taken into account; in fixing a maximum and minimum value, the minimum difference is 4R
(R=reproducibility).
Notwithstanding this measure, which is necessary for statistical reasons, the manufacturer of fuels should
nevertheless aim at a zero value where ht stipulated maximum value is 2R and at the mean value in case of
quotations of maximum and minimum limits. Should it be necessary to clarify the question as to whether a
fuel meets the requirements of the specifications, the terms of ISO 4259 should be applied.
(2) The fuel may contain oxidation inhibitors and metal deactivators normally used to stabilize refiner gasoline
streams, but detergent/dispersive additives and solvent oils must not be added
(3) The actual sulphur content of the fuel used for the Type I test shall be reported.
\
Reference Fuel G23
Characteristics Units Basis Limits Test method
Minimum Maximum
Composition:
Methane
Balance
[Inters +C2/C2 +]
N2
% mole
% mole
% mole
% mole %
92.5
-
-
7.5
91.5
-
-
6.5
93.5
1
8.5
ISO 6974
ISO 6974
ISO 6974
Sulphur content Mg/m - - 50 ISO 6326-5
(1) Value to be determined at standard conditions 293, 2K (20C) and 101.3 kPa
Reference Fuel G25
Characteristics Units Basis Limits Test method
Minimum Maximum
Composition
Methane
Balance
[Inerts+C2/C2+]
N2
% mole
% mole
% mole
86
-
84
-
88
ISO 6974
ISO 6974
350
14
12
1
16
ISO 6974
Sulphur Content Mg/m - - 50 ISO 6326-5
(1) Value to be determined at standard conditions 293.2 K (20 C) and 101.3 kPa
Note:- G-20 G-23 and G-25 are three types of CNG fuels, out of which any two are selected for testing of
vehicles/engines to take care of the variation in the
[ANNEXURE IVH
[See rule 115 (14)]
LIQUIFIED PETROLEUM GAS (LPG)
Parameter Unit Limits fuel A Limits fuel B Test method
Minimum Maximum Minimum Maximum
Motor octane
number
93.5 93.5 EN 589
Annex B
Composition:
C3 Content
C4 Content
Olefins
% vol
% vol
% vol
48
48
0
52
52
12
83
13
9
87
17
15
ISO 7941
ISO 7941
ISO 7941
Evaporation
residue
Mg/kg 50 50 NFM
41.015
Total suplhur
content
Ppm w
Weight
(1)
50
50
En 24260
Hydorgen
sulphide
- None None ISO 8819
Copper strip
corrosion
Rating Class I Class I ISO 6251
Water at 0 C Free Free Visual
inspection
(1) Value to be determined at standard conditions 293, 2K (20C) and 101, 3 kPa.
(2) This method may not accurately determine the presence of corrosive materials if the
sample contains corrosion inhibitors or other chemicals, which diminish the
351
corrosively of the sample to the copper strip. Therefore, the addition of such
compounds for the sole purpose of biasing the test method is prohibited.
Note:- Fuel A and Fuel B are two types of LPG fuels used for testing of vehicles/engines, to take care of the
variation to commercial LPG fuel.
ANNEXURE IV-I
[See rule 115 (14)]
NATURAL GAS (NG)
Reference Fuel G20
Characteristics Unit Limits fuel A Limits fuel B Test method
Minimum Maximum Minimum Maximum
Composition
Methane
Balance
[Inerts+C2/C2+]
N2
%
mole
%
mole
%
mole
100
-
.
99
-
100
1
ISO 6974
ISO 6974
ISO 6974
Sulphur Content Mg/
m
- - 50 ISO 6326-5
(1) Value to be determined at standard conditions 293.2 K (20 C) and 101.3 kPa
ANNEXURE IV-J
[See rule 115 (15)
TECHNICAL SPECFICATION FO THE REFERENCE FUEL TO BE USED FOR TESTING VEHICLES
EQUIPPED WITH GASOLINE ENGINES.
Parameter Unit Limits Test method
Minimum Maximum
Research Octane number,
RON
95.0 - EN 25164
352
Motor Octane number
MON
85.0 - EN 25163
Density at 15 C Kg/m 740 754 ISO 3675
Reid vapour pressure kPa 56.0 60.0 PrEN ISO, 13016-1,
(DVPE)
Distillation:
Initial boiling point
Evaporated at 100 C
Evaporated at 150 C
Final boiling point
C
% v/v
% v/v
C
24
50.0
83.0
190
40
58.0
89.0
2.00
EN-ISO 3405
EN-ISO 3405
EN-ISO 3405
EN-ISO 3405
Residue % v/v - 2.0 EN-ISO 3405
Hydrocarbon analysis
-olefins
Aromatics
Benzene
Saturates
% v/v
% v/v
% v/v
% v/v
-
29.0
-
Report
10
35.0
1.0
Report
ASTM D1319
ASTMD1319
ASTM D1319
Pr. EN 12177
Carbon/hydrogen ration Report Astm d1319
Oxidation Stability Minutes 480 - EN-ISO-7536
Oxygen content % m/m - 1.0 EN 1601
Existent gum Mg/m - 0.04 EN-ISO 6246
Sulphur content Mg/kg - 10 ASTM D 5453
Copper corrosion for 3 MG/KG - Class I EN-ISO 2160
Lead content Mg/1 - 1.03 ASTM D 3231
(1) The values quoted in the specification are “true values”. In establishment of their limit values the terms of
ISO 4259 “ Petroleum products- Determination and application of precision data in relation to methods of
test’ have been applied and in fixing a minimum value, a minimum difference of 2R above zero has been
taken into account; in fixing a maximum and minimum value, the minimum difference is 4R
(R=reproducibility).
Notwithstanding this measure, which is necessary for statistical reasons, the manufacturer of fuels should
nevertheless aim at a zero value where ht stipulated maximum value is 2R and at the mean value in case of
quotations of maximum and minimum limits. Should it be necessary to clarify the question as to whether a
fuel meets the requirements of the specifications, the terms of ISO 4259 should be applied.
353
(2) The fuel may contain oxidation inhibitors and metal deactivators normally used to stabilize refiner gasoline
streams, but detergent/dispersive additives and solvent oils must not be added
(3) The actual sulphur content of the fuel used for the Type I test shall be reported.
[ANNEXURE IV K
See rule 115 (15)]
TECHNICAL CHARACTERISTICS OF REFERENCE FUEL PRESCRIBED FOR APPROVAL
TESTS AND TO VERIFY CONFORMITY OF PRODUCTION.
Type: Diesel fuel
Parameter Unit Limits Test method
Minimum Maximum
Cetane Number 52.00 54.00 EN-ISO 5165
Density at 15’C Kg/m3 833 837 EN-ISO 3675
Distillation:
-50% point
Degree C 245 - EN-ISO 3405
-95% point Degree C 345 350 EN-ISO 3405
Final boiling
point
Degree C - 370 EN-ISO 3405
Flash Point Degree C 55 - EN 22719
CFPP Degree C - -5 EN 116
Viscosity at 40 C mm/s 2.3 3.3 EN-ISO 3104
Polycyclic
aromatic
hydrocarbons
% m/m 3.0 6.0 IP 391
Sulphur content
(3)
Mg/kg - 10 ASTM D 5453
Copper corrosion - Class 1 EN-ISO 2160
Conradson
carbon residue
(10% DR)
%m/m - 0.02 EN-ISO 10370
Ash content % m/m - 0.2 EN-ISO 6245
354
Water content % m/m - 0.02 EN-ISO 12937
Neutralization
(strong acid)
number
MgKOH/g - 0.02 ASTM D974-95
Oxidation
stability
Mg/ml 0.025 EN-ISO 12205
Lubricity (HFRR
wear scan
diameter at 60
degree C
Micrometer 400 CEC F-06-A-96
FAME Prohibited
The actual sulphur content of the fuel ues for the Type 1 test shall be reported . even
though oxidation stability is controlled, it is likely that shelf life will be limited. Advice
should be soughat from the supplier as to storage conditions and life.
(1) The value quoted in the specifications are “true values”. In establishment of their limit values the terms
of ISO 4259 Petroleum Products- Determination and application of precision data in relation to methods
of test have been applied in fixing a minimum value, a minimum difference of 2R above zero has been
taken into account, in fixing a maximum and minimum value, the minimum difference is 4R
(R=Reproducibility)
Notwithstanding this measure, which is necessary for technical reasons, the manufacturer of fuels should
nevertheless aim at a zero value where the manufacture of fuels should nevertheless aim at a zero value
where the stipulated maximum value is 2R and at the mean value in the case of quotations of maximum
and minimum limits. Should i9t be necessary to clarify the questions as to whether a fuel meets the
requirements of the specifications, the terms of ISO-4259 should be applied.
(2) The range of cetane number is not in accordance with the requirements of a minimum range of 4R.
however, n the case of a dispute between fuel supplier and fuel user, the terms of ISO 4259 may be used
to resolve such disputes provided replicate measurements, of sufficient number to achieve the necessary
precision, are made in preference to single determinations.
(3) The actual sulpher content of the fuel used for the Type I test shall be reported.
(4) Even though oxidation stability is controlled, it is likely that shelf life will be limited. Advice should be
sought from the supplier as to storage conditions and life.]
ANNEXURE IV L
[See rule 115 (15)]
SPECIFICATION OF REFERENCE FUEL FOR CNG
CNG reference fuel for category M and Category N Vehicles not exceeding 3,500 Kgs GVW and Two and
Three Wheelers.
Reference Fuel G23
Characteristics Units Basis Limits Test method
Reference fuel Minimum Maximum
355
G20
Composition:
Methane
Balance
[Inters +C2/C2 +]
N2
% mole
% mole
% mole
% mole %
100
-
-
7.5
99
-
-
93.5
100
1
ISO 6974
ISO 6974
ISO 6974
Sulphur content Mg/m - - 10 ISO 6326-5
Wobbe Index
(net)
MJ/m 48.2 47.2 49.2
Reference Fuel G25
Characteristics Units Basis Limits Test method
Minimum Maximum
Composition
Methane
Balance
[Inerts+C2/C2+]
N2
% mole
% mole
% mole
86
-
14
84
-
12
88
1
16
ISO 6974
ISO 6974
ISO 6974
Sulphur Content Mg/m - - 10 ISO 6326-5
Wobbe Index
(net)
MJ/m 39.4 38.2 40.6
(1) Inserts (different from N2) +C2 + C2+
(2) Value to be determined at 293, 2K (20 C) and 101.3 Kpa
(3) Value to be determined at 273, 2 K (0 C) and 101.3 kPa
The above type of vehicles should be tested with both types of Reference Fuels CNG Reference
Fuel for Vehicles above 3500 Kgs GVW.
356
1[ANNEXURE IVM
[See Rule 115(15)]
SPECIFICATION OF REFERENECE FUEL FOR LPG
LPG Reference Fuel for category M and Category n Vehicles not exceeding 3,500 Kgs GVW and Two and
Three Wheelers
Parameter Unit Fuel A Fuel B Test method
Composition ISO 7941
C3-content %vol. 30+2 85+2
C4-content % vol. Balance Balance
<C3>C4 % vol. maximum 2 Maximum2
Olefins % vol. Maximum12 Maximum15
Evaporation residue mg/kg Maximum50 Maximum50 ISO 13757
Water at 00C Free Free Visual inspection
Total sulphur
content
mg/ka Maximum 10 Maximum 10 EN 24260
Hydrogen sulphide None None ISO 8819
Copper strip
corrosion
Rating Class 1 Calss 1 ISO 62511
Odour Characteristic Characteristic
Motor octane
number
Minimum 89 Minimum 89 EN 589 Annex B
(1) this method may not accurately determine the presence of corrosive materials if the sample contains
corrosion inhibitors or other chemicals which diminish the corrosivity of the sample to the copper strip.
Therefore, the addition of such compounds for the sole purpose of biasing the test method is prohibited
LPG Reference for Vehicles above 3,500 Kgs GVW
Parameter Unit Fuel A Fuel B Test method
Composition ISO 7941
C3-content %vol. 50+2 85+2
C4-content % vol. Balance Balance
<C3>C4 % vol. maximum 2 Maximum 2
Olefins % vol. Maximum 12 Maximum 15
Evaporation residue mg/kg Maximum 50 Maximum 50 ISO 13757
Water at 00C Free Free Visual inspection
Total sulphur
content
mg/ka Maximum 10 Maximum 10 EN 24260
Hydrogen sulphide None None ISO 8819
Copper strip
corrosion
Rating Class 1 Calss 1 ISO 62511
Odour Characteristic Characteristic
Motor octane
number
Minimum 92.5 Minimum 92.5 EN 589 Annex B
(1) this method may not accurately determine the presence of corrosive materials if the sample contains
corrosion inhibitors or other chemicals which diminish the corrosivity of the sample to the copper strip.
Therefore, the addition of such compounds for the sole purpose of biasing the test method is prohibited.]
______________________________________________
1. Ins by GSR 84(E), dated 9th February, 2009( w.e.f. 9-2-2009)
357
1[ANNEXURE IVN
[See Rule 115(15)]
SPECIFICATION OF COMMERCIAL GASOLINE FUEL
Characteristics Unit Requirements
Unleaded regular Unleaded
premium
Color, visual Orange Red
Density @ 15 0C Kq/m3 720-775 720-775
Distillation
(a) Recovery upto 70 0C ( E 70) % volume 10-45 10-45
(b) Recovery up to 100 0C (E 100) % volume 40-70 40-70
(c) Recovery up to 150 0C ( E 150) % volume 75 min 75 min
(d) Final Boiling Point (FBP), max 0C 210 210
(e) Residue, max % volume 2 2
Research Octane Number (RON) min 91 95
Motor Octane Number (MON), min 81 85
Gum content ( solvent washed), max mg/100ml 5 5
Oxidation Stability, min Minutes 360 360
Sulphur,total,max mg/kg 50 50
Lead content ( as Pb.), max g/I 0.005 0.005
Reid Vapour Pressure (RVP), max kPa 60 60
Vapour Lock Index (VLI)
(a) Summer, max 750 750
(b) Other months, max 950 950
Benzene Content, max % volume 1 1
Copper strip corrosion for 3 hrs @ 50
0C, max
Rating Class 1 Class 1
Olefin content, max % volume 21 18
Aromatics content, max % volume 35 35
Oxygen content, max % mass 2.7 2.7
Oxygenates Content
(a) Methnol , max % volume 3 3
(b) Ethnaol, max % volume 5 5
(c) Io-propyl alcohol, max % volume 10 10
(d) Iso-Butyl alcohol, max % volume 10 10
(e) Tertiary-butyl alcohol, max % volume 7 7
(f) Ethers containing 5 or more carbon
atoms per molecule, max
% volume 15 15
(g) Other oxygenates, max % volume 8 8
____________________________________________
1. Ins by GSR 84(E), dated 9 th February, 2009 ( w.e.f (9-02-2009)
358
Note:-
1. Test method and other provisions details along with the requirements as given above shall be issued by
Bureau of Indian Standards.
2. Petrol of 89 RON and 79 MON and having all other properties as the unleaded regular grade indicated above
shall also be available for meeting requirements of the older vehicles which will be conforming to pre-
EuroIII equivalent vehicular emission norms.
3. Type test for Phosphorous content in petrol shall be introduced.
4. These standards specifications have been finalized by the Expert Committee after discussions with
automobile and oil industry as Auto Fuel Policy.]
359
1[ANNEXURE IVO
[See Rule 115(15)]
SPECIFICATION OF COMMERCIAL DIESEL FUEL
Characteristics Unit Requirements
Ash, max % mass 0.01
Carbon Reisdue( Ramsbottom ) n 10 % residue,
max
% mass 0.3
Without additives
Cetane number (CN), min 51
Cetnae Index (CI), min 46
Distillation:
95 % vol. recovery at 0C, max 0C 360
Flash point:
(a) Abet, min 0C 35
Kinematic Viscosity @ 40 0C Cst 2.0-4.5
Density @ 0C kg/m3 820-845
Total sulphur, max mg/kg 50
Water content mg/kg 200
Cold Filter Plugging point (CFPP)
(a) Summer , max 0C 18
(b) Winter, max 0C 6
Total contamination , max mg/kg 24
Oxidation stability , max g/m3 25
Polycyclic aromatic hydrocarbon (PAH), max % mass 11
Lubiricity, corrected wear scar diameter (wsd
1,4) @ 60 OC, max
µm (micron) 460
Copper strip corrosion for 3 hrs @ 50 0C Rating Class -1
Note:
1. These density and 95 per cent distillation recovery temperature limits shall be company pool average values.
However, all samples shall meet the density @ 15 0C limit of 820-860 kg/m3 and 95 per cent minimum
distillation recovery at 370 0C.
2. Foe diesel processed from Assam crude, relaxation of CN & CI by 3 units and density shall be applicable as
provided in the present BIS specification.
3. Test method and other provisions/ details alomg with the requirements as given above shall be issued by Bureau
of Indian Standards.
4. These standards specifications have been finalized by the Expert Committee after discussions with the
automobile and oil industry as per Auto Fuel P:olicy.]
____________________________________________
1. Ins by GSR 84(E), dated 9 th February, 2009 ( w.e.f (9-02-2009)
360
1[ANNEXURE IVP
[See Rule 115A(7)]
DIESEL FUEL SPECIFICATIONS
Characteristics Minimum Maximum Test Method
Cetane Numer 52 54 EN-ISO 5165
Density at 15 0C (kg/m3) 833 837 EN-ISO 3675
Distillation in 0C
50 % point (0C) 245 -
95 % point (0C) 345 350 EN-ISO 3405
Final boiling point (0C) - 370
Flash point (0C) 55 - EN 22719
CFPP (0C) - (-)5 EN 116
Viscosity at 40 0C(mm2/s) 2.5 3.5 EN-ISO 3104
Polycylic aromatic hydrocarbons
( %m/m)
3.0 6.0 IP 391
Sulphur Content (mg/kg) - 300 ASTM D 5453
Copper Corrosion - Class 1 EN ISO 2160
Conradson carbon residue ( 10 %
DR) (%m/m)
- 0.2 EN ISO 10370
Ash Content (%m/m) - 0.01 EN-ISO 6245
Water Content (%m/m) - 0.05 ASTM D 974
Neutralization (strong acid) No.
(mg KOH/g)
- 0.02 ASTM D 974
Oxidation Stability (mg/ml) - 0.025 EN-ISO 12205
____________________________________________
1. Ins by GSR 84(E), dated 9 th February, 2009 ( w.e.f (9-02-2009)
361
Cargo Mention chemical identity of the
dangerous and hazardous goods
Nature of hazard
Protective devices
Emergency action Notify police and fire brigade immediately
Spillage
Fire
First-aid -- Additional information provided by the manufacturer or sender
ANNEXURE V
[See rule 132 (2)]
TRANSPORT EMERGENCY CARD (ROAD)
1[ANNEXURE VI
[See rule 11 (1A)]
SPECIMEN OF OBJECTIVE EXAMINATION OF A DRIVER
1. You are driving up an intersection where there is no signal, people are crossing in front of your car, you should-
-
(a) continue into the intersection without reducing speed
(b) slow down and be careful
(c) stop and allow persons to cross the road.
2. You wish to take a "U" turn at an intersection controlled by a traffic light, you should--
(a) drive to another intersection that has no traffic light
(b) wait until the light turns green before making the "U" turn
(c) make the "U" turn if there is a policeman at the intersection.
3. You are driving towards an intersection where flashing yellow traffic light is displayed, you should--
(a) slow down and proceed with caution
(b) stop, if possible to do so safely
(c) continue at the same speed.
4. You are driving on a two-lane street, the vehicle in front of you is moving very slowly, and the road ahead is
clear for overtaking, you should--
(a) pass the vehicle from the left hand side
362
(b) pass the vehicle from the right hand side
(c) pass the vehicle from any convenient side.
5. Your car is involved in an accident hurting people, you should--
(a) report to the nearest police station and take the persons to the hospital
(b) need not report to the police station
(c) need not report to the police station but should take the persons to the hospital.
6. While driving, to make a right turn, the proper hand signal is--
(a) extend right palm in a horizontal position outside of and to the right of vehicle with palm of the
hand turned to the front
(b) extend right arm and rotate in anti-clockwise direction
(c) extend right arm with palm downward and move up and down several times.
7. A pedestrian is crossing the street at an intersection in an unmarked cross-walk, you should--
(a) yield to the pedestrian the "right of way"
(b) proceed with care as pedestrian is "Jay-walking"
(c) reduce speed and warn pedestrian.
8. While driving, you wish to change from one lane to another, you should--
(a) give the proper turn signal
(b) change lanes only when it is safe to do so by giving the proper turn signal
(c) never change lanes as it is against the law.
9. You approached an intersection that does not have traffic lights, a policeman or traffic signs, you should--
(a) slow down and use caution
(b) come to a full stop
(c) not change speed if the way is clear.
10. You have a valid learner's licence to drive a car, you should--
(a) drive only in daylight hours
(b) have someone with a valid driver's licence on the seat beside you when you drive
(c) practice driving only on streets that have very little traffic.]
________________________________________________________
1. Ins. by G.S.R. 933 (E), dated 28th October, 1989.
363
1[ANNEXURE VII
[See Table below rule 62(1)]
CHECK HEAD LAMP BEAM
The horizontal cut off of the passing beam when tested at 10 metres
Distance in an unladen condition of the vehicle shall be always below the head lamp centre line and the
difference shall be within 5 CM to 25 CM
Note.--Each head lamp shall be checked individually by blocking the other lamp
FIG.:
_______________________________________________
1. Annexure VII ins. by G.S.R. 684 (E), dated 15th October, 1999 (w.e.f. 22-10-1999) and omitted by
G.S.R. 76 (E), dated 31st January, 2000 (w.e.f. 31-1-2000) and again ins. by G.S.R. 221 (E), dated 28th
March, 2001 (w.e.f. 28-3-2001).
364
1[ANNEXURE VIII
(See clause (c) of sub-rule (4) and sub-rule (9) of rule 115 C)
SAFETY CHECKS FOR USE OF. LPG FUEL IN FOUR-WHEELED VEHICLES AND ABOVE
(AS PER AIS 026) AND TWO-WHEELED AND THREE-WHEELED VEHICLES (AS PER AIS
027) AND INDIAN GAS CYLINDER RULES, 1981
(as amended from time to time)
LPG Kit Component 2[Approving
Certifying/Verifying Authority]
Clause of AIS 026/ AIS 027/Other Rules,
Standards, etc.
(1) (2) (3)
3[1. (a) Cylinder for
four wheelers and
above
Department of Explosives,
Nagpur to approve/endorse in
case of foreign make
ECE-R-67-01 or IS: 14899-2000 or as
approved under Gas Cylinder Rules, 1981
(b) Cylinder for two
wheelers and three
wheelers
Department of Explosives,
Nagpur to approve/endorse in
case of foreign make
ECE-R-67-01 or IS: 14899-2000 or as
approved under Gas Cylinder Rules, 1981
2. Cylinder Valves/
Multi Function Valve
Department of Explosives,
Nagpur to approve/endorse in
case of foreign make
ECE-R-67-01 or IS: 15100-2001 or as
approved under Gas Cylinder Rules, 1981]
3.Regulator/ Vaporizer* Testing or verification of
certificate with test report by
Test Agency as per United
Nations, Economic Commission
for Europe Regulation No. 67
Rev. 1
United Nations, Economic Commission for
Europe Regulation No. 67 Rev. 1 Note:
Regulator/vaporizer is to be tested, as per
Economic Commission for Europe
Regulation No. 67 (Rev. 1), including
endurance test for 6,000 number of cycles.
4. Gas-Air Mixer* Testing/verification of
certificate with test report by
Test Agency as per United
Nations, Economic Commission
for Europe Regulation No. 67
United Nations, Economic Commission for
Europe Regulation No. 67 Rev. 1
Rev. 1
5. Petrol and
Gas Solenoid
Valves*
Testing/verification of
certificate with test report by
Test Agency as per United
Nations, Economic Commission
for Europe Regulation No. 67
Rev. 1
United Nations, Economic Commission for
Europe Regulation No. 67 Rev. 1 or
equivalent standard. Note: Petrol solenoid
valve is to be tested, as per Economic
Commission for Europe Regulation No. 67
(Rev. 1), for endurance only at a pressure l.5
times the working pressure for 6,000 number
of cycles
6. Inspection, Testing
and Commissioning
Certificate
To be tested by Test Agency Clause 14 of AIS 026/AIS 027
365
(a) Leak
i
(b) Excess
flow valve
*
(c)
Automati
fill li i *
(d) Compartment
or Sub-
7. Filling Connection Installation on vehicle to be
checked by Test Agency
As per Appendix A, Clause (d) of AIS
026/AIS 027
8. Ventilation Test Agency to verify Clause 8 (E) of
AIS 026/AIS 027
9. Testing of Conduit* Testing/Verification of
Certificate with Test Report by
Test Agency as per equivalent
standard
Clause 8 (F) (iii) of AIS 026/AIS 027
10. (a) LPG fuel
line exceeding 4.5
kg/cm 2*
Clause 9 of AIS 026 / AIS 027
*Pressure testing Testing/Verification of
Certificate with Test Report by
Test Agency as per equivalent
Standard.
Clause 9 (i) of AIS 026/AIS 027
* Size of tube as per
engine capacity
Manufacturer's declaration to be
verified by Test Agency
Clause 9 (ii) of AIS 026/AIS 027
*Fitment on vehicle Verification by Test Agency as
per Safety Code of Practice
Clause 9(v) of AIS 026/AIS 027
(b) Flexible hose/ fuel
line not exceeding*
4.5 kg/cm2
Clause 10 of AIS 026/AIS 027
* Material Testing/Verification of
Certificate with Test Report by
Test agency as per equivalent
standard.
Clause 9(ii)(a) of AIS 026/AIS 027
* Fitment on
vehicle
Verification by Test Agency as
per Safety Code of Practice.
Clauses 10(B), 9(v) of AIS 026/AIS 027
* Pressure Testing/verification of
Certificate with Test Report by
Test Agency as per equivalent
standard.
Clause 10(A)(i) of AIS 026/AIS 027
366
(c) Joints and
connections to
withstand
pressure
without any
leakage
Verification by Test Agency Clauses 9(iv) & 1D(A) of AIS 026/AIS 027
11. Compartment/Sub-
compartment*
Test to be carried out by Test
Agency as per Safety Code of
Practice
Clause 8D of AIS 026/AIS 027
12. Safety check for
installation of LPG
system
Safety checks to be carried out
by Test Agency as per Safety
Code of Practice
Relevant clauses of AIS 026/AIS 027
* Certificate issued conforming to equivalent prescribed standards by accredited testing agency of the country of
origin or a report issued by internationally accredited test laboratory may also be accepted.
Note.--Only the latest version of all the standards, as mentioned, shall be referred for compliance.
______________________________________________________
1. Subs. by G.S.R. 788 (E), dated 27th November, 2002 (w.e.f. 2-6-2003).
2. Subs. by G.S.R. III (E), dated 10th February, 2004, for "Certifying/Verifying Authority" (w.e.f. 10-8- 2004).
2. Subs. by G.S.R. III (E), dated 10th February, 2004, for
1. (a) Cylinder
for four wheeler and
above*
* Department of Explosives, Nagpur to certify/endorse
in case of foreign make
* IS: 14899-2000
-- Fitment of cylinder
on vehicle
* Test agency to verify as per safety code of practice
for use of LPG fuels in IC engined vehicles, under
Central Motor Vehicles Rules, 1989
* Clause 8 of AIS 026
(b) Cylinder for two
wheelers and three
wheelers*
* Department of Explosives, Nagpur to certify/
endorse in case of foreign make
* IS: 14899-2000
-- Fitment of cylinder
on vehicle
* Test agency to verify as per safety code of practice
for use of LPG fuels in IC engines to power two-
wheelers and three-wheelers, under Central Motor
V hi l R l 1989
* Clause 8 of AIS 027
2. Cylinder Valves/
Multi Function
Valve*
* Department of Explosives, Nagpur to certify/endorse
in case of foreign make
IS : 15100 - 2001 and Gas
Cylinder Rules, 1981 as
amended from time to
367
1[ANNEXURE IX
(See Item E of rule 115B)
SAFETY CHECKS FOR USE OF CNG FUELS IN INTERNAL COMBUSTION ENGINED VEHICLES (AS
PER AIS 028) AND INDIAN GAS CYLINDER RULES, 1981
CNG Kit Component Certifying/Verifying Authority Clause of AIS
028/Other Rules,
Standards, etc.
(1) (2) (3)
(1) -Cylinder* * DOE, Nagpur to certify/endorse in case of
foreign make
* Gas Cylinder Rules,
1981
-Fitment of
cylinder on
vehicle
* Test agency to verify as per AIS 028 * Clauses 2.3, 2.5 & 2.6
of AIS 028
(2) Cylinder Valves* DOE, Nagpur to certify/endorse in case of foreign
make
IS: 3224 or Gas
Cylinder Rules, 1981
(3) Regulator* Testing of the component as per ISO-15500 or
equivalent standard by test agency.
ISO-15500 or
equivalent standard.
Alternatively, test agency to verify the test
certificate/report conforming to the above standard
issued by manufacturer/ accredited testing
laboratory.
(4) Gas-Air Mixer* Testing of the component as per ISO-15500 or
equivalent standard by test agency.
ISO-15500 or
equivalent standard.
Alternatively, test agency to verify the test
certificate/report conforming to the above standard
issued by manufacturer/ accredited testing
laboratory.
(5) Petrol & Gas Solenoid
Valves*
Testing of the component as per ISO-15500 or
equivalent standard by test agency.
ISO-15500 or
equivalent standard.
Alternatively, test agency to verify the test
certificate/report conforming to the above standard
issued by manufacturer/ accredited
testing
(6) Filling Connection (NZS
& NGV-1 type)
Installation on vehicle to be checked by test
agency as per AIS 028
Clauses 2.2.2, 2.2.3,
d f(7) Ventilation Test agency to verify Clause 2.4.2 of AIS 028
(8) Testing of Conduit* Testing of the component/verification of certificate
or test report as per AIS 028 or equivalent standard
Clause 2.4.3.1 of AIS
028
(9) CNG fuel line
(a) High pressure-
exceeding 100 kPa*
368
* Exceeding 2.15 Mpa
- Rigid Testing of the component/verification of certificate
or test report as per AIS 028 or equivalent standard
Clause 3.1.1 of AIS 028
- Pipe
- Flexible
Testing of the component/verification of certificate
or test report as per AIS 028 or equivalent standard
Clauses 3.1.3.1, 3.1.3.2
and 3.1.3.3.1 of AIS 028
* Exceeding 100 kPa and
less than
Testing of the component/ verification of
certificate or test report as per AIS 028 or
Clause 3.1.2 of AIS 028
(b) Low pressure- not
exceeding 100 kPa*
Testing of the component/ verification of
certificate or test report as per AIS 028 or
Clause 3.2.1 (a) of AIS
028
(10)
Compartment/Sub
Testing of the component/ verification of
certificate or test report as per AIS 028 or
Clause 2.4.1 of AIS 028
Clause 2.4.3.5 of AIS
(11) Safety check for
installation
Safety checks to be carried out by test agency as
per AIS 028
Relevant clauses of AIS
028
______________________________________________
1. Ins. by G.S.R. 853 (E), dated 19th November, 2001 (w.e.f. 19-5-2002).
369
1[ANNEXURE X
2[See Item F of rule 115B and sub-rule (10) of rule 115 (c)]
SAFETY AND PROCEDURAL REQUIREMENTS FOR TYPE APPROVAL OF CNG AND LPG OPERATED
VEHICLES
Ministry of Road Transport and Highways has prescribed Safety Code of Practice and
Procedure to be followed by the test agencies prescribed under CMVR for the purposes of issuing type
approval certificates for CNG and LPG operated vehicles. The safety code of practice and type approval
procedure to be followed for CNG and LPG operated vehicles is given in AIS 024 (Safety and
Procedural Requirements for Type Approval of CNG Operated Vehicles) and AIS 025 (Safety and
Procedural Requirements for Type Approval of LPG Operated Vehicles) standards respectively. These
documents contain safety code of practice and procedure to be followed for installation of CNG/LPG kits
by vehicle manufacturers (OE), kit installers or kit manufacturers or kit suppliers or kit importers. These
standards also contain technical specifications of vehicle and kit, checklist for fitness tests of in-use
converted vehicles, criteria to authorize kit installer and details about installation.
Role and responsibility of each agency concerned is given in the above referred documents, salient
features of which are described below:
Role of Test Agency (Page Nos. 3 to 6 of AIS 024 and Page Nos. 3 and 4 of AIS 025)
Type approval of CNG and LPG vehicles is carried out by the test agencies according to the Safety and
Procedural Requirements for Type Approval of CNG/LPG Operated Vehicles. The test agencies carry out
type approval certification trials on the vehicles and components submitted by vehicle/kit
manufacturers/kit suppliers. Type approval certification trials basically involve testing and evaluation of
vehicles and components for performance and safety and installation checks on the vehicle. If the vehicle
meets the type approval norms and prescribed testing for components, type approval certificate is
awarded to the vehicle/kit manufacturers/ kit suppliers and the vehicle/kit manufacturers/kit suppliers are
supposed to manufacture and market the vehicles fitted with kits conforming to those specifications.
Necessary owner's manual, service manual, periodical inspection and maintenance instruction and
adequate infrastructure to offer after sales service is the responsibility of vehicle/kit manufacturers/kit
suppliers.
Responsibility of Vehicle/Kit Manufacturer/Kit Supplier (Page Nos. 3 and 4 of AIS 024 and Page 3 of
AIS 025)
Prime responsibility of the vehicle/kit manufacturers/kit suppliers, as the case may be, is to manufacture
and supply the vehicles fitted with CNG/LPG kits conforming to the specifications declared at the time of
type approval. Necessary owner's manual giving the instructions about periodical maintenance, safety
checks and do's and don'ts is to be prepared by vehicle/kit manufacturers/kit suppliers and provided to the
__________________________________________
1. Ins. by G.S.R. 853 (E), dated 19th November, 2001 (w.e.f. 19-5-2002).
2. Subs. by G.S.R. 788 (E), dated 27th November, 2002 (w.e.f. 2-6-2003).
370
vehicle owners. Necessary tools and gadgets to carry out installation, periodical inspection and
maintenance of the vehicle shall be provided. If the kit manufacturer/supplier feels that additional safety
instructions need to be provided in the vehicle, then it should be displayed at an appropriate location
inside and outside the vehicle. During warranty period vehicle/kit manufacturers/kit suppliers should
strictly adhere to the maintenance schedule and give appropriate training to the users. If the vehicle/kit
manufacturers/kit suppliers feel that normal training is not sufficient, they should arrange comprehensive
training to the users, drivers and other technicians on inspection, operation and maintenance. Vehicle/kit
manufacturers/kit suppliers shall establish necessary infrastructure while establishing/appointing service
centres/kit installers as per Annexure V of AIS 024 and AIS 025 standards.
Responsibility of Owners/Users (Clause Nos. 12 and 15 of Annexure V of AIS 024/AIS 025)
• The owner/driver shall be instructed in the correct way that the gas system and controls
function along with owner's operation manual for the gas system outlining the following:--
* Basic gas system explanation with a diagram
* Fuel change over switch operation if bi-fuel system is fitted
* Starting procedure for cold and hot start
* How the vehicle is refueled
* In the event of backfiring check procedure and compliance
* In the event of gas leak shut off procedure and compliance
* Emergence or information contact numbers in the event of emergency
• Users should comply with all the instructions given by the vehicle manufacturers/kit installers.
Necessary periodic inspection, as listed in owner's manual, shall be carried out by the users.
• Users should follow the instructions while filling gas and carry out leakage test periodically.
• Users to insist on appropriate training to be given to the drivers and technicians by vehicle
manufacturers/kit installers/suppliers. Periodic inspection of valves, pipelines, cylinders and
regulator/vaporizer shall be carried out.
• In case of mal-functioning of any component, necessary repair and maintenance to be carried out at
authorised service station under the assistance/guidance of installers, vehicle/kit
manufacturers/suppliers.
• The vehicle owner shall apply to the concerned registering authority within 14 days of undertaking
371
the alteration far endorsement of particular alteration in the registration certificate mentioning place
and date of installation and installation certificate number.
Statutory Requirements for Registration of Vehicle
Enhancement of safety can be ensured taking the following measures:--
• While registering every converted bus, vehicle manufacturers/kit installers along with bus body
builders and transport authority shall jointly examine the bus prior to registration. The registration of
such a vehicle shall be done only after signing the report jointly by all the concerned along with the
transport authority.
• Details of training module and frequency of training shall be communicated to the users/competent
authority such as transport authority/registration authority by vehicle manufacturers/kit installers.
• User-friendly approach from vehicle manufacturers and kit installers for servicing, maintenance and supply of
spare parts is essential. The details shall be worked out prior to placement of order.
• Additional safety features such as 2 Nos. of dry powder type fire extinguishers of 2 kg each shall be provided
one in driver's cabin and another in passenger compartment. Gas leakage detector will further enhance safety.
• For electrical installation, flameproof cables shall be used, especially positive terminals shall be locked firmly
with all cables and pipes with proper looming to take care of vibrations; fire retardant material shall be used
for seat/upholstery/roof and side lining. Safety instructions about alertness in case of gas leakage and fire
hazard shall be displayed.
Note.--The AIS standards referred to in this Annexure are available with the Automotive Research
Association of India (ARAI), P.B. No. 832, Pune-411004, India (Fax: 91-20-5434190, Website:
http://www.araiindia.com). Copies of this document are also available with the other testing agencies, as referred to
in rule 126 of the Central Motor Vehicle Rules, 1989.]
372
1[ANNEXURE XI
[See Clause (s) of Rule 2]
I. Smart Card specifications for Driving Licence, Registration Certificate, Regional
Transport Office cards, endorsing authority cards, reviewing authority cards, key generation
authorities cards, etc.
(a) Microprocessor based Integrated Circuit Card with contacts and with a minimum
of 4 kbyte available Electrically Erasable Programmable Read Only Memory (EEPROM)
(b) Compliant to ISO/IEC 7816-1, 2 and 3
(c) Compliant to SCOSTA vl.2b, dated March 15, 2002
(d) Supply voltage 3V nominal
(e) T=0 or T=1 transport protocol
(f) Min 10 years data; retention
(g) Min 300,000 EEPROM write cycles
(h) Operating ambient temperature range -25C to +55C
(i) Glossy surface, Poly Vinyl Chloride (PVC)/Acrylonitrile Butadiene Styrene
(ABS) plastic construction with overlay to allow color dye sublimation printing
(j) Smart Cards must have data objects for card sequence no (Tag 5F34) and cards
primary account no (Tag 5A) at the Master File level as per International Standards
Organisation 7816-6. Once programmed these data objects can not be changed.
II. Specifications of Hand Held Terminals
(a) Display: 4 lines X 16 characters back lit Liquid Crystal Display (LCD). Contrast
level should be such that it can be read in broad day light.
(b) Key Pad : Numeric, Function and scroll keys. Support for entering non-numeric
characters using this key pad should also be available.
(c) Power On/Off : Switch or automated sleep mode enabled.
(d) Smart Card Readers : Two built in International Standards Organisation 7816
compliant smart card readers with 3V interface and with both T=0 and T=1 transport
protocols.
___________________________________________
1. Ins by GSR 513(E),dated 10 th August,2005 (w.e.f. 10-08-2004)
373
(e) Battery pack : (Rechargeable and removable) with 8 hours of on time and 7 days
stand-by time. Preferably support should be there to operate device with the help of
standard 1.5 Volts Dry Cells of Standard size.
(f) Memory : Memory requirements will depend on the application and the number of
applications supported by the Terminal.
(g) Printer : Printer is Optional and Printer Port is desirable.
(h) Application : National Standard of Driving Licence and Registration Certificate as
specified in this Annexure.
(i) Communication : Standard Communication interfaces for loading and unloading of
software (upgrades).
III. Specifications of Dye Sublimation
Printer Print Process : Dye Sublimation.
Resolution : 300 dpi.
Print Speed approximately 30 seconds per side.
Colors : up to 16.7 million colors by using YMCK+O/YMCKO/KO ribbon.
Capable of edge to edge printing.
Having card input hopper and in-built card cleaning system.
Capable of printing and smart card electronic personalization in single pass.
Smart card encoder within the printer shall be Factory Standard for PC to Smart Card Reader interface,
International Standards Organisation 7816 compliant, support 3V chip card with T=0 and T=1 protocol.
IV. Specifications of Smart Card Reader
Factory Standard for PC to Smart Card Reader interface, ISO 7816 compliant, support 3V chip card with
T=0 and T=1 protocol, USB interface, external. Readers must have Factory Standard for PC to Smart
Card Reader interface drivers.
1[Note.--The microprocessor chip of the Smart Card mentioned at Para I shall necessarily conform to
the specifications given in this Annexure for Smart Card based Driving Licence and Vehicle
Registration documents for Transport and Non-Transport vehicles and shall contain the information
prescribed by these rules.]
_________________________________________
1. Subs by GSR 504 (E) ,dated 15th June,2010 (w.e.f 15/06/2010)
374
RENT A CAB SCHEME, 19891
In exercise of the powers conferred by sub-section (1) of section 75 of Motor Vehicles
Act, 1988 (59 of 1988), the Central Government hereby makes the following scheme for
regulating the business of renting of motor cabs to persons desiring to drive the cabs for their
own use and matters connected therewith, namely:—
1. Short title, commencement and application.—(1) This scheme may be called Rent a Cab
Scheme, 1989.
(2) It shall come into force on the first day of July, 1989.
(3) It shall apply to all motor cabs to which tourist permits have been issued under sub-section
(9) of section 88 of the Act and operating under a licence granted in terms of para 6.
2. Definitions.—In this section unless the context otherwise requires:
(a) “Act” means Motor Vehicles Act, 1988 (59 of 1988);
(b) “Form” means of Form appended to this scheme;
(c) “licence” means a licence granted or renewed under paragraph 6 to engage in the business of
renting of motor cabs to persons desiring to drive the cabs 2[***] for their own use;
(d) “licensing authority” means the State Transport Authority constituted under sub-section (1)
of section 68 of the Act;
(e) “operator” means the holder of a permit issued under sub-section (9) of section 88 of the Act
in respect of not less than 50 motor cabs.
3. Licensing of operator.—No person shall engage himself in the business of renting a motor
cab under this scheme without licence.
4. Application for grant or renewal of licence.—(1) An application for the grant or renewal of
a licence under paragraph 6 shall be made in Form 1 to the licensing authority having jurisdiction
in the area in which he resides or has his principal place of business (hereinafter referred to as
main office) and shall be accompanied by a fee of rupees five thousand.
(2) Where the applicant has, besides the main office, branch office within the jurisdiction of the
licensing authority referred to in clause (1), the application shall indicate such place with the
number of motor cabs proposed to be stationed at each such place.
(3) Where the applicant has branch offices outside the jurisdiction of the licensing authority, the
application shall be made to the licensing authority in whose jurisdiction the branch office is
situated, in Form 2 accompanied by a fee of rupees one thousand in respect of each such branch
offices.
______________________________________________________
1. Vide S.O. 437 (E), dated 12th June, 1989, published in the Gazette of India, Extra. Pt. II, Sec.
3(ii), dated 12th June, 1989.
2. Omitted by S.O. 808 (E), dated 28th November, 1991 (w.e.f. 28-11-1991).
375
5. Scrutiny of application.—A licensing authority shall, before granting or renewing a licence
take into consideration the following namely:—
(i) That applicant has a good moral character and has intimate knowledge of passenger
transport business;
(ii) That the main office or the branch office of the applicant is either owned by the
applicant or is taken on lease by him or is hired his name and it has adequate space
for reception room, administrative section, clock room with locker facilities, sanitary
blocks, 1[adequate parking space] for the motor cabs;
(iii) That the applicant has necessary facilities for the housing, maintenance and repair of
his vehicles;
(iv) That the applicant has at least one telephone which is accessible throughout day and
night;
(v) That the applicant has 2[branch offices or sub-licensee offices] with telephones, in not
less than 5 cities of tourist importance with facilities for housing, maintenance and
repair of vehicles;
(vi) That the financial resources of the applicant are sufficient to provide for the continued
maintenance of motor cabs and for the efficient management of the establishment;
(vii) That the applicant maintains not less than 50 motor cabs of which 50 per cent. are air-
conditioned duly covered by permits issued under sub-section (9) of section 88 of the
Act, with comprehensive insurance, fitness certificate, motor vehicles tax paid up to
date:
Provided that in the case of licence for a branch office situated in a place outside the
jurisdiction of the licensing authority, it shall be sufficient, if such branch office maintains not
less than five motor cabs.
6. Grant of licence.—The licensing authority may, on receipt of an application under paragraph
4 and after satisfying himself that the applicant has complied with the requirements of paragraph
5, grant or renew the licence in Form 3 or, as the case may be, in Form 4:
Provided that no application for a licence shall be refused by the licensing authority
unless the applicant is given an opportunity of being heard and reasons for such refusal are given
in writing by the licensing authority.
7. Duration of licence.—A licence granted or renewed under paragraph 6 shall be valid for a
period of five years from the date of grant or renewal:
Provided that in the case of the licence in respect of branch offices referred to under clause (3) of
paragraph 4, the validity of such licence shall be restricted to the validity of the licence granted
in respect of main office.
1. Subs. by S.O. 808 (E), dated 28th November, 1991 (w.e.f. 28-11-1991).
2. ibid
376
8. General conditions to be observed by the holder of the licence.—The holder of a licence
shall,—
(i) maintain a register with a separate page for such vehicle containing the particulars
specified, in Form 5 and where a motor cab is hired by a foreign national shall
maintain a register in Form 6;
(ii) not shift the principal place of business mentioned in the licence without the prior
approval in writing of the licensing authority which granted the licence;
(iii) keep the premises and all the records and register maintained and the motor cabs open
for inspection at all reasonable times by the licensing authority or by any person not
below the rank of motor vehicle inspector as may be authorised in this behalf by the
licensing authority;
(iv) submit from time to time, to the licensing authority such information and return as
may be called for by it;
(v) display at a prominent place in its main office and its branch offices, the licence
issued in original and certified copies thereof, attested by its licensing authority;
(vi) maintain in their main office and branch offices at a conspicuous place a “complaint
book” in the Form 7 with serially numbered pages in triplicate. The licensees shall
despatch the duplicate copy of complaint if any, to the licensing authority by
registered post expeditiously and in any case not later than 3 days;
(viii) maintain a suggestion box in the main office and branch offices and forward their
suggestions received with their comments, if any, to the licensing authority, once a
month;
(ix) where he is having a foreign collaboration with the approval of the Government, this
fact should be displayed in the office premises, with the specific approval of
Department of Tourism of the Central Government.
9. Collection of hire charges.—The holder of a licence shall collect the hire charges from a
foreign national or a non-resident Indian only in foreign exchange and shall hold for the purpose
a licence to transact in foreign exchange.
10. Duties and responsibilities of hirers of motor cabs.—(1) It shall be the duty of every hirer,
to keep the holder of the licence, informed of his movements from time to time.
(2) If an individual or company has hired the vehicles as a leader of the tourist party, it shall be
the duty of such leader of the party to keep the holder of the licence informed of the movement
of each vehicle, from time to time.
1[(3) If a hirer so desires, he may engage a person possessing a valid driving licence to drive the
vehicle so hired during the period of the hire agreement.]
11. Power of licensing authority to suspend or cancel the licence.—(1) If the Licensing
Authority is satisfied after giving the holder of the licence, an opportunity of being heard, that he
has —
___________________________________
1. Ins. by S.O. 808 (E), dated 28th November, 1991 (w.e.f. 28-11-1991
377
(a) failed to comply with the provisions of paragraph 8 or 9; or
(b) failed to maintain the motor cab in compliance with the provisions of the Act and rules;
or
(c) any one of his employees has misbehaved with the customers; or
(d) any complaint against the licensee by any hirer has been proved beyond reasonable doubt;
(i) suspend the licence for a specified period, or
(ii) cancel the licence.
(2) Where the licence is liable to be cancelled or suspended and the licensing authority is of
opinion that having regard to the circumstances of the case, it would not be necessary or
expedient to cancel or suspend the licence, if the holder of the licence agrees to pay the fine that
may be imposed by the Licensing Authority, then notwithstanding anything contained in clause
(1) the Licensing Authority may instead of cancelling or suspending the licence, as the case may
be, recover from the holder of the licence, the said fine.
(3) For the purpose of recovery of the sum of money agreed upon, the State Government may, by
notification in the Official Gazette, specify the amount recoverable for each day of suspension
and the amount recoverable in lieu of cancellation of the licence and specify the time within
which the sum of money agreed upon is payable failing which the order passed under clause (1)
shall be implemented.
(4) When the licence is suspended or cancelled under clause (1), the holder of the licence shall
surrender the licence to the Licensing Authority.
12. Appeal.—Any person aggrieved by any order of the Licensing Authority under paragraph 6
or paragraph 11, may within 30 days of the receipt of the order, appeal to the State Transport
Appellate Tribunal.
13. Procedure for appeal.—(1) An appeal under Rule 12 shall be preferred in duplicate in the
form of a memorandum setting forth the ground of objections to the order of the Licensing
Authority and shall be accompanied by a fee as may be specified by the State Government, by
notification, in the Official Gazette.
(2) The State Transport Appellate Tribunal may after giving an opportunity to the parties to be
heard and after such enquiry as it may deem necessary, pass appropriate orders.
14. Voluntary surrender of the licence.—The holder of a licence may at any time surrender the
licence issued to him to his Licensing Authority which granted the licence and, on such
surrender, the Licensing Authority shall cancel the licence. The holder of the licence before
surrendering the licence shall clear the dues referred to in clause (2) of paragraph 11.
378
FORM 1
[See paragraph 4 (1)]
Application for grant or renewal of licence for renting motor cabs in respect of main office
To
The State Transport Authority
................................. State/UT
I, the undersigned, hereby apply for a licence for renting motor cabs in the State of .................
1. Full name
Son/wife/daughter of
2. (a) Full Address:
(b) Telephone No.
3. Age
4. (a) Experience in the management of transport business.
(b) No. of motor cabs held with valid permits.
5. Particulars of Licence, if already held.
6. (a) Place where the applicant has his main office with detailed address.
(b) Place where the applicant has his branch office with detailed address.
Name of Town(s)
(c) The number of motor cabs to be stationed in each branch office.
7. Nature and extent of financial resources of the applicant.
8. Particulars of motor cabs owned alongwith details of Registration Mark.
9. Full description of the place where the business is to be carried on—
(a) Location, open area, covered area.
(b) Any other particulars.
10. I am conversant with the conditions for carrying the business for renting
of motor cabs.
11. I hereby declare that to the best of my knowledge and belief the particulars given above are
correct and true.
The prescribed fee of rupees five thousand is paid by*...........
Place:
Date: Signature of Applicant
(*Here indicate mode of payment).
379
FORM 2
[See paragraph 4 (3)]
Application for grant or renewal of licence for renting of motor cabs in respect of Branch Office,
in another State
To
The State Transport Authority
................................... State/UT
I, the undersigned, hereby apply for a licence for renting motor cabs in a Branch Office in the
State of.........
1. Full Name
Son/wife/daughter of
2. Full address (Branch Office)
Telephone No.
3. Age
4. (a) Experience in the management of transport business.
(b) Number of motor cabs held with valid permits in the proposed Branch Office.
5. Particulars of Licence, held for Main Office—
(a) Authority which granted the licence.
(b) Date of issue.
(c) Date of expiry.
6. Place where the applicant has Main Office—
7. Nature and extent of financial resources of the applicant.
8. Particulars of motor cabs owned with details of permits, registration number etc.
9. Full description of branch office where the business is to be carried on—
(a) Location, open area, covered area.
(b) Any other particulars.
10. I hereby declare that to the best of my knowledge and belief the particulars given above are
correct and true.
The prescribed fee of rupees one thousand is paid by*..........
Place:
Date: Signature of applicant
(*Indicate the mode of payment).
380
FORM 3
[See paragraph 6]
Licence for Renting Motor Cabs—Main Office
Name of the operator:
Son/wife/daughter of
Full address of the place of business:
Registration Mark of motor cabs authorised for renting
Main Office Branch Office
1. 2. 3.
4. 5. 6.
7. 8. 9.
10. 11. 12.
is licensed to rent motor cab.
This licence is issued on..............and is valid up to.......
State Transport Authority
......................... State/UT
Renewal
Renewed from..............................................................to..........................................
State Transport Authority
......................... State/UT
381
FORM 4
[See paragraph 6]
Licence for Renting Motor Cabs—Branch Office
Name of the operator:
Son/wife/daughter of
Full address of the Branch Office............
Address where the Main Office is situated..............
Licence number and the Authority which issued the licence with its date of expiry.............
Registration mark of motor cabs authorised for renting in the Branch Office licensed to rent
motor cabs.
The licence is issued on.........and is valid up to.........
State Transport Authority
......................... State/UT
Renewal
Renewed from.............................................................to.......................................
State Transport Authority
......................... State/UT
382
FORM 5
[See paragraph 6]
Register to be maintained by Rent a Motor Cab Licensee
Si . No Name of Hirer Full Address Telephone No. if any Motor Driving
Licence No
1 2 3 4 5
Issued by
(Authority)
Class of vehicle Date of issue Date of Expiry Date and Time of
hire
6 7 8 9 10
Date and Time of
returning vehicle
Motor vehicle used for
total kilometers
Signature of Hirer Remarks
11 12 13 14
383
FORM 6
[See paragraph 8(i)]
Register to be maintained by Rent a Motor Cab Licensee in case where the motor cab is hired to
a foreigner
Sl.
No.
Name of
Hirer
Full
Address
Telephone
No. if
any
Motor
Driving
Licence
No.
Issued by
(Authority)
Class of
vehicle
1 2 3 4 5 6 7
Date of
issue
Date of
Expiry
Passpo
rt
No.
Issued by
Authority
and
State/Nati
Date
of
issue
of
Date
of
Expir
y
Date of birth as
per passport
8 9 10 11 12 13 14
Driving
permit
No. if
any
Date of
issue of
Driving
permit
Class of
vehicle
Authorised
to drive
Date and
Time of
Hire
Date and
time of
returning
vehicle
Motor
vehicle
used for
total
k
Signa-
ture of
Hirer
Rem-
arks
15 16 17 18 19 20 21 22
384
FORM 7
[See paragraph 8(vi)]
Complaint Book
(with pages serially numbered in triplicate)
1. Name of the complainant:
2. Full address:
3. The name and address of the holder of the licence for ‘Rent a Cab’
4. Licence number, and the authority which issued the licence
5. The date and time of hiring the vehicle and date and time when the vehicle
was returned
6. Vehicle number
Complaint in brief:
Date:
Place: Signature
1. The State Transport Authority by Registered Post .........(Duplicate copy)
2. The complainant ..................(Triplicate copy)
385
RULES OF THE ROAD REGULATIONS, 19891
1. Short title and commencement.—(1) These regulations may be called the Rules of the Road
Regulations, 1989.
(2) They shall come into force on the first day of July, 1989.
1. Vide S.O. 439(E), dated 12th June, 1989, published in the Gazette of India, Extra., Pt. II, Sec.
3(ii), dated 12th June, 1989.
2. Keep Left.—The driver of a motor vehicle shall drive the vehicle as close to the left side of
the road as may be expedient and shall allow all traffic which is proceeding in the opposite
direction to pass on his right hand side.
3. Turning to left and right.—The driver of a motor vehicle shall:
(a) when turning to the left, drive as close as may be to the left hand side of the road from
which he is making the turn and of road which he is entering;
(b) when turning to the right draw as near as may be to the centre of the road along which he
is travelling and arrive as near as may be at the left hand side of the road which the driver
is entering.
4. Passing to right.—Except as provided in regulation 5, the driver of a motor vehicle shall pass
to the right of all traffic proceeding in the same direction as himself.
5. Passing to the left.—The driver of a motor vehicle may pass to the left of a vehicle the driver
of which having indicated an intention to turn to the right has drawn to the centre of the road and
may pass on either side, a tram car or other vehicle running on fixed rails whether travelling in
the same direction as himself or otherwise provided that in no case shall he pass a tram car at
time or in a manner likely to cause danger or inconvenience to other users of the road including
persons leaving or about to enter tram cars.
6. Overtaking prohibited in certain cases.—The driver of a motor vehicle shall not pass a
vehicle travelling in the same direction as himself:
(a) if his passing is likely to cause inconvenience or danger to other traffic proceeding in any
direction;
(b) if he is near a point, a bend or corner or a hill or other obstruction of any kind that renders
the road ahead not clearly visible;
(c) if he knows that the driver who is following him has begun to over take him;
(d) if the driver ahead of him has not signalled that he may be overtaken.
________________________________
1. Vide S.O. 439 (E), dated 12 th June, 1989.
386
7. Overtaking not to be obstructed.—The driver of a motor vehicle shall not, when being
overtaken or being passed by another vehicle, increase speed or do anything in any way to revent
the other vehicle from passing him.
8. Caution at road junction.—The driver of a motor vehicle shall slow down when approaching
at a road intersection, a road junction, pedestrian crossing or a road corner, and shall not enter
any such intersection, junction or crossing until he has become aware that he may do so without
endangering the safety of persons thereon.
9. Giving way to traffic at road junction.—The driver of a motor vehicle shall, on entering
road intersection at which traffic is not being regulated, if the road entered is a main road
designated as such, give way to the vehicles proceeding along that road, and in any other case
give way to all traffic approaching the intersection on his right hand.
10. Fire service vehicles and ambulance to be given free passage.—Every driver shall, on the
approach of a fire service vehicle or of an ambulance allow it free passage by drawing to the side
of the road.
11. Right of way.—The pedestrians have the right of way at uncontrolled pedestrian crossings.
When any road is provided with footpath or cycle track specially for other traffic, except with
permission of a police officer in uniform, a driver shall not drive on such footpath or track.
12. Taking ‘U’ turn.—No driver shall take a ‘U’ turn where ‘U’ turn is specially prohibited and
on busy traffic road. If a ‘U’ turn is allowed the driver shall show signal by hand as for a right
turn, watch in the rear view mirror and turn when safe to do so.
13. Signals to be given by drivers.—The following signals shall be used by the drivers of all
motor vehicles namely:—
(a) When about to slow down, a driver shall extend his right arm with the palm, downward
and to the right of the vehicle and shall move the arm so extended up and down several
times in such a manner that the signal can be seen by the driver of any vehicle which may
be behind him.
(b) When about to stop, a driver shall raise his right forearm vertically outside of and to the
right of the vehicle, palm to the right.
(c) When about to turn to the right or to drive to the right hand side of the road in order to
pass another vehicle or for any other purpose, a driver shall extend his right arm in a
horizontal position outside of and to the right of his vehicle with the palm of the hand
turned to the front.
(d) When about to turn to the left or to drive to the left hand side of the road a driver shall
extend high right arm and rotate it in an anticlockwise direction.
(e) When a driver wishes to indicate to the driver of a vehicle behind him that he desires that
driver to overtake him he shall extend his right arm and hand horizontally outside of and
to the right of the vehicle and shall bring the arm backward and forward in a semi-
circular motion.
387
14. Direction indicator.—The signals referred to in regulation 12, may be simplified also by
mechanical or electrical devices.
15. Parking of the vehicle.—(1) Every driver of a motor vehicle parking on any road shall park
in such a way that it does not cause or is not likely to cause danger, obstruction or undue
inconvenience to other road users and the manner of parking is indicated by any sign board or
markings on the road side, he shall park his vehicle in such manner.
(2) A driver of a motor vehicle shall not park his vehicle:—
(i) at or near a road crossing, a bend, top of a hill or a humpbacked bridge;(ii) on a foot-path;
(iii) near a traffic light or pedestrian crossing;
(iv) in a main road or one carrying fast traffic;
(v) opposite another parked vehicle or as obstruction to other vehicle;
(vi) alongside another parked vehicle;
(vii) on roads or at places or roads where there is a continuous white line with or without a
broken line;
(viii) near a bus stop, school or hospital entrance or blocking a traffic sign or entrance to a
premises or a fire hydrant;
(ix) on the wrong side of the road;
(x) where parking is prohibited;
(xi) away from the edge of the footpath.
16. Visibility of lamps and registration marks.—(1) No load or other goods shall be placed on
any motor vehicle so as to mask or otherwise interrupt vision of any lamp, registration mark or
other mark required to be carried by or exhibited on any motor vehicle by or under the Act,
unless a duplicate of the lamp or mark so marked or otherwise obscured is exhibited in the
manner required by or under the Act for the exhibition of the marked or obscured lamp or mark.
(2) All registration and other marks required to be exhibited on a motor vehicle by or under the
Act shall at all times be maintained in a clear and legible condition.
17. One way traffic.—A driver shall not—
(i) drive a motor vehicle on road declared ‘One Way’ except in the direction specified by
sign boards;
(ii) drive a vehicle in a reverse direction into a road designed ‘One Way’
.
18. Driving on channelised roads (lane traffic).—(1) Where any road is marked by lanes for
movement of traffic, the driver of a motor vehicle shall drive within the lane and change the lane
only after giving proper signal.
(2) Where any road is marked by a yellow-line dividing road, the vehicle proceeding in the same
direction trying to overtake each other shall not cross the yellow line.
19. Stop sign on road surface.—(1) When any line is painted on or inlaid into the surface of any
road at the approach to the road junction or to a pedestrian crossing or otherwise, no driver shall
388
drive a motor vehicle so that any part thereof projects beyond that line at any time when a signal
to stop is being given by a Police Officer or by means of a traffic control light or by the display
of any traffic sign.
(2) A line for the purpose of this regulation shall be not less than 50 millimetres in width at any
part and may be either in white, black or yellow.
20. Towing.—(1) No vehicle other than a mechanically disabled motor vehicle or incompletely
assembled motor vehicle, a registered trailer or a side car, shall be drawn or towed by any motor
vehicle, except for purposes of delivery and to the nearest filling station or garage.
(2) No motor vehicle shall be drawn or towed by any other motor vehicle unless there is in the
driver’s seat of the motor vehicle being drawn or towed a person holding a licence authorising
him to drive the vehicle or unless the steering wheels of the motor vehicle being towed, are
firmly and securely supported clear of the road surface by some crane or other device on the
vehicle which is drawing to towing it.
(3) When a motor vehicle is being towed by another motor vehicle the clear distance between the
rear of the front vehicle and the front of the rear vehicle shall at no time exceed five metres. The
tow ropes, or chains shall be of a type-easily distinguishable by other road users and there shall
be clearly displayed on the rear of the vehicle being towed in black letters not less than seventy-
five millimetres high and on a white background the words ‘ON TOW’.
(4) No motor vehicle when towing another vehicles other than a trailer or signs car shall be
driven at a speed exceeding twenty-four kilometres per hour.
21. Use of horns and Silence Zones.—A driver of a vehicle shall not:
(i) sound the horn needlessly or continuously or more than necessary to ensure safety;
(ii) sound the horn in silence zones;
(iii) make use of a cut-out by which exhaust gases are released other than through the
silencer;
(iv) fit or use any multitoned horn giving a harsh, shrill, loud or alarming noise;
(v) drive a vehicle creating undue noise when in motion;
(vi) drive a vehicle with a muffler causing alarming sound.
22. Traffic Sign and Traffic Police.—A driver of a motor vehicle and every other person using
the road shall obey:—
(a) every direction given, whether by signal or otherwise, by a police officer or any
authorised person for the time being in-charge of the regulation of traffic;
(b) any direction applicable to him and indicated on or by notice traffic sign or signal fixed
or operated by an authority, competent to do so;
389
(a) any direction indicated by automatic signalling devices fixed at road intersections.
23. Distance from vehicles in front.—The driver of a motor vehicle moving behind another vehicle shall
keep at a sufficient distance from that other vehicle to avoid collision if the vehicle in front should
suddenly slow down or stop.
24. Abrupt brake.—No driver of a vehicle shall apply brake abruptly unless it is necessary to do so for
safety reasons.
25. Vehicles to the uphill to be given precedence.—On mountain roads and steep roads, the driver of a
motor vehicle travelling down hill shall give precedence to a vehicle going uphill wherever the road is not
sufficiently wide to allow the vehicles to pass each other freely without danger, stop the vehicle to the
side of the road in order to allow any vehicle proceeding uphill to pass.
26. Obstruction of driver.—A driver of a motor vehicle shall, not allow the person to stand or sit or
anything to be placed in such a manner or position as hamper his control of the vehicle.
27. Speed to be restricted.—The driver of a motor vehicle shall, when passing or meeting a procession
or a body of troops or police on the march or when passing workman engaged on road repair, drive at a
speed not exceeding more than 25 kilometres an hour.
28. Driving of tractors and goods vehicles.—A driver when driving a tractor shall not carry or allow
any person to be carried on tractor. A driver of goods carriage shall not carry in the driver’s cabin more
number of persons than that is mentioned in the registration certificate and shall not carry passengers for
hire or reward.
29. Projections of loads.—No person shall drive in any public place any motor vehicle which is loaded
in a manner likely to cause danger to any person in such a manner that the road or any part thereof or
anything extends laterally beyond the side of the body or to the front or to rear or in height beyond the
permissible limit.
30. Restriction to carriage of dangerous substances.—Except for the fuel and lubricants necessary for
the use of the vehicle, no explosive, highly inflammable or otherwise dangerous substance, shall be
carried on any public service vehicle.
31. Restrictions on driving backwards.—No driver of a motor vehicle shall cause the vehicle to be
driven backwards without first satisfying himself that he will not thereby cause danger or undue
inconvenience to any person or in any circumstances, for any greater distance or period of time than may
be reasonably necessary in order to turn the vehicle round.
32. Production of documents.—A person driving a vehicle,—
(i) shall always carry with him his driving licence; certificate of registration; certificate of
taxation and certificate of insurance of the vehicle and in case of transport vehicle the permit
and fitness certificate, also;
(ii) shall on demand by police officer in uniform or an officer of the Motor Vehicle Department
in uniform or any other officer authorised by the Government, produce the documents for
inspection:
1[Provided that where any or all of the documents are not in his possession, he shall produce in person
an extract or extracts of the documents duly attested by any police officer or by any other officer or send
it to the officer who demanded the documents, by registered post, within 15 days of the demand.]
33. Every driver must be conversant with the provisions of sections 112, 113, 121, 122, 125, 132, 134,
185, 186, 194 and 207 of the Motor Vehicles Act, 1988.
-----------------------
1. Ins. by S.O. 329 (E), dated 13th May, 1992 (w.e.f. 13-5-1992).
390
SOLATIUM SCHEME, 19891
In exercise of the powers conferred by sub-section (1) of Section 163 of the Motor
Vehicles Act, 1988 (59 of 1988), the Central Government hereby makes the following scheme for
the payment of compensation to the victims of hit and run motor accident, namely:—
1. Short title and commencement.—(1) This scheme may be called the Solatium Scheme,
1989.
(2) It shall come into force on the first day of July, 1989.
2. Definitions.—In the scheme unless the context otherwise requires,—
(a) “Act” means the Motor Vehicles Act, 1988 (59 of 1988).
(b) “Claims Enquiry Officer” means the Sub-Divisional Officer, Tehsildar, or any other
officer in charge of the revenue sub-division of a Taluka in each revenue district of a
State or such other officer not below the rank of Sub-Divisional Officer or a Tehsildar, as
may be specified by the State Government.
(c) “Claims Settlement Commissioner” means the District Magistrate, the Deputy
Commissioner, the Collector or any other officer-in-charge of a revenue district in a State
appointed as such by a State Government.
(d) “Clause” means clause of this scheme.
(e) “District-level Committee” means a Committee set up under Clause 11.
(f) “Form” means a Form annexed to the Scheme.
(g) “Standing Committee” means a Committee set up under Clause 3.
(h) “Transport Commissioner” means an officer appointed as such by the State Government
and includes the Director General of Transport, Director of Transport or the Controller of
Transport, appointed by the State Government.
3. Standing Committee.—(1) There shall be a Standing Committee consisting of the following
members, namely:—
(a) Joint Secretary (Transport) .......Chairman
(b) Joint Secretary (Insurance) . ......Member
(c) General Manager, General Insurance Corporation ......Member
(d) General Manager of each of Insurance Companies
for the time being carrying on general insurance
business in India .....Member
_____________________________
1. Vide S.O. 440 (E), dated 12th June, 1989, published in the Gazette of India, Extra., Pt. II,
Sec. 3 (ii), dated 12th June, 1989.
391
(e) Transport Commissioners, one each from three States,
nominated by the Central Government by rotation ........Member
(f) Director/Deputy Secretary (Finance Division)
Ministry of Surface Transport. ........Member
(g) An officer of General Insurance Corporation, of the
rank of Deputy General Manager (Accounts) ......Member Secretary
(2) The person nominated as member by virtue of an office shall cease to be a member when he
ceases to hold that office.
(3) The term of office of the members nominated under sub-clause (a) of clause (1) shall be for a
period of one year.
4. Remuneration of members of Standing Committee.—A member shall not be paid any
remuneration, except travelling and daily allowance at the rates admissible to him and be paid
from the source he draws salary.
5. Powers and functions of the Standing Committee.—The Standing Committee shall:
(i) periodically review the working of the scheme and its implementation and direct
corrective steps, wherever necessary;
(ii) considering the issues raised in the report of the District-level Committee and provide
guidance or directions, wherever called for.
(iii) framing regulations for conduct of business by Standing Committee and District level
Committee.
6. Meeting of the Standing Committee.—The Standing Committee shall meet at such time,
date and at such a place as a Chairman may, from time to time, appoint in this behalf:
Provided that the Committee shall meet at least twice a year.
7. Quorum.—Not less than three members shall form a quorum:
Provided that if at any meeting there is no quorum, the Chairman may adjourn the
meeting to a date not less than seven days later, informing the members present and sending
notices to other members that he proposes to dispose of the business at the adjourned meeting,
whether there is a quorum or not and he may thereupon dispose of the business at such adjourned
meeting.
8. Decision by majority.—Every matter shall be determined by the majority of votes of the
members present and voting and in case of equality of votes, the Chairman shall have a casting
vote.
392
9. Notice of meeting.—(1) Notice shall be given by the member-Secretary to every member of
the time, date and place fixed for each such meeting at least seven days before such meeting and
each member shall be furnished with a list of business to be disposed of at the said meeting:
Provided that when an urgent meeting is called by the Chairman, such notice shall not be
necessary. However, member-Secretary shall send an intimation to each member.
(2) No business which is not on the list of business shall be considered at a meeting without the
permission of the Chairman.
10. Minutes of the meeting.—The proceedings of each meeting of the Standing Committee
shall be circulated to all members and thereafter recorded in a minutes book which shall be kept
as permanent record. The record of the proceedings of each meeting shall be signed by the
Chairman.
11. District Level Committee.—(1) There shall be a District Level Committee in each District
consisting of the following members, namely:—
(a) Claims Settlement Commissioner ........Chairman
(b) Claims Enquiry Officer, nominated by the State Government ......Member
(c) The Regional Transport Officer or any other officer of
Motor Vehicles Department as nominated by the
State Government ........Member
(d) Any member of the public or, a voluntary organisation
connected with the road safety aspects nominated by
the Chairman.
(e) Divisional Manager of the Insurance Company ........Member-Secretary
(2) A person nominated as a member by virtue of an office shall cease to be member when he
ceases to hold that office.
1[(3) The term of office of the members nominated under items (b), (c) and (d) of sub clause (1)
shall be determined by the State Government.]
12. Remuneration of Member of the District Level Committee.—A member shall not be paid
any remuneration except travelling and daily allowance at the rate admissible to him in his
respective Department and be paid from the source he draws salary. A member nominated under
clause (d) shall be paid travelling allowance/dearness allowance by General Insurance
Corporation, at the rate as may be decided by the General Insurance Corporation.
13. Powers and functions of District Level Committee.—The District Level Committee shall
undertake all functions connected with the implementation of the scheme at the District Level. It
shall also perform functions such as:
________________________
1. Subs. by S.O. 668 (E), dated 7th October, 1991 (w.e.f. 7-10-1991).
393
(i) to evaluate the progress of implementation of the scheme in the concerned District and
take corrective steps, wherever necessary;
(ii) to submit a report on quarterly basis to the Standing Committee. The report shall inter
alia include statistics month-wise, about the claim applications received, awarded,
pending and reasons for pendency;
(iii) to keep close liaison with other authorities in the district so as to ensure that scheme gets
adequate publicity;
(iv) to provide guidance/clarifications to concerned authorities wherever called for.
14. Meeting of the District Level Committee.—The District Level Committee shall meet at
such time, date and at such place, within the concerned District itself, as the Chairman may, from
time to time, appoint in this behalf:
Provided that the Committee shall meet at least once in each quarter.
15. Quorum.—Not less than two members shall form a quorum.
16. Decision by majority.—Every matter shall be determined by a majority of vote of the
members present and voting. In case of equality of votes, Chairman shall have a casting vote.
17. Notice of meeting.—(1) Notice shall be given by member-Secretary to each member of the
time, date and place fixed for the meeting at least seven days before such a meeting and each
member shall be furnished with a list of business to be disposed of at the said meeting:
Provided that when an urgent meeting is called by the Chairman, such notice shall not be
necessary. However, member-Secretary shall send an intimation to each member.
(2) No business which is not on the list of business shall be considered at a meeting without the
permission of the Chairman.
18. Minutes of the meeting.—The proceedings of each meeting of the District Level Committee
shall be circulated to all members and thereafter recorded in a minute book which shall be kept
as a permanent record. The record of the proceedings of each meeting shall be signed by
Chairman.
19. Nomination of insurance company.—General Insurance Corporation shall nominate any of
its office or an insurance company in each District for settlement of claims under section 161 of
the Act and of this scheme.
20. Procedure for making the claim application.—(1) The applicant shall submit an
application seeking compensation under this scheme in Form I alongwith duly filled in discharge
receipt in Form II and the undertaking in Form V to the Claims Enquiry Officer of the Sub-
Division or Taluka in which the accident takes place.
394
(2) An application under clause (1) shall be made within a period of six months from the date of
the accident:
Provided that an application made after six months but not after 12 months from the date
of the accident may be accepted by the Claims Enquiry Officer, if he is satisfied that there are
reasonable grounds to condone the delay.
(3) Where the Claims Enquiry Officer does not accept the grounds advanced by the applicant he
shall record speaking orders and communicate to the applicant reasons for not accepting the
claim application.
21. Procedure to be followed by the Claims Enquiry Officer.—(1) On receipt of claims
application, the Claims Enquiry Officer shall immediately obtain a copy of the FIR, inquest
report, post mortem report or certificate of injury, as the case may be, from the concerned
authorities and hold enquiry in respect of claims arising out of hit and run motor accidents.
(2) It shall be the duty of the Claims Enquiry Officer—
(a) to decide as to who are the rightful claimants, where there are more than one claimants;
(b) to submit, as early as possible, and in any case within a period of one month from the date of
receipt of application a report in Form III alongwith duly discharged receipt in Form II and the
undertaking in Form V alongwith his own recommendation.
(3) Where the Claims Settlement Commissioner has returned any report to the Claims Enquiry
Officer for further enquiry under sub-clause (2) of clause 22, the Claims Enquiry Officer shall
make such additional enquiries as may be necessary and re-submit the report to the Claims
Settlement Commissioner within 15 days for final order.
22. Sanctioning of claims.—(1) On receipt of report of the Claims Enquiry Officer, the Claims
Settlement Commissioner shall sanction the claim, as far as possible, within a period not
exceeding fifteen days from the date of receipt of such report and communicate the sanction
order in Form IV alongwith duly discharge receipt in Form II and the undertaking in Form V to
the nominated officer of the insurance company, with a copy to the following:—
(a) the Claims Enquiry Officer.
(b) the claimant.
(c) the concerned Motor Accident Claim Tribunal.
(d) the concerned Transport Commissioner.
(e) General Insurance Corporation headquarters.
(2) Where the Claims Settlement Commissioner has any doubt in respect of the report submitted
by the Claims Enquiry Officer, he shall return the report to the Claims Enquiry Officer for
further enquiry, indicating the specific points on which the enquiry is to be made.
23. Payment of compensation.—(1) In the case of claims arising out of the death, the payment
shall be made to the legal representatives of the deceased decided by the Claims Enquiry Officer.
395
(2) In the case of claims arising out of grievous hurt, the payment shall be made to the person
injured.
(3) The nominated office of the insurance company, immediately on receipt of the sanction order
in Form IV together with discharge receipt in Form II and undertaking Form V shall make the
payment to the claimant and dispatch cheque/demand draft to the claimant through registered
post AD and simultaneously send intimation to all the concerned authorities to whom the copy of
the sanctioned order is endorsed.
(4) The payment to the claimant by the insurance company shall be made within 15 days from
the date of receipt of the sanction order together with discharge receipt and wherever delay
occurs, reasons therefore shall be explained to the Claims Settlement Commissioner.
(5) Registered letters containing cheque/demand draft, if returned undelivered from claimants
shall be placed before the Claims Settlement Commissioner for further directions.
(6) The nominated officer of the insurance company shall furnish money return giving number
and the date of the sanction order, date of receipt of sanctioned order payments made, sanction
order pending for payment, to the Claims Settlement Commissioner with a copy to Claims
Enquiry Officer and General Insurance Corporation Headquarters, Bombay.
24. Annual report.—The General Insurance Corporation shall prepare to place an annual report
on the working of the scheme before the Standing Committee and also forward a copy to the
Central Government.
396
FORM I
[Clause 20 (1)]
Form of application for compensation from Solatium Fund
I, ....................................son*/daughter*/widow* of Shri ............................ residing at
........................................... having been grievously injured in motor vehicle accident hereby
apply for grant of compensation for the grievous injuries sustained. Necessary particulars in
respect of the injury sustained by me are given below:—
I, ...................................son of/daughter of/widow of* Shri ...................... residing at
................................. hereby apply as a legal representative/agent for the grant of compensation
on account of death/injuries sustained by Shri/Shrimati/Kumari ...................................son
of/daughter of/widow* of Shri ......................................who died/had sustained injuries in a motor
vehicle accident on .................. at................................. Particulars in respect of accident and other
information are given
below:—
1. Name and father’s name of person injured (husband’s name in case of married
woman or widow):
2. Address of the person injured/dead:
3. Age.........Date of Birth........
4. Sex of the person injured/dead:
5. Place, date and time of the accident:
6. Occupation of the person injured/dead:
7. Nature of injuries sustained:
8. Name and address of Police Station in whose jurisdiction accident took place or was
registered:
9. Name and address of the Medical Officer/Practitioner who attended on the injured/dead:
10. Name and address of the claimant/claimants:
11. Relationship with the deceased:
12. Any other information that may be considered necessary or helpful in the disposal of the
claim:
I hereby swear and affirm that all the facts noted above are true to the best of my
knowledge and belief.
SIGNATURE OF THE CLAIMANT
*Strike out whichever is not applicable.
397
FORM II
[Clause 20 (i)]
ANNEXURE - SANCTION ORDER NO.
Dated:......................
Discharge Receipt
Received with thanks from .................Insurance Co. Ltd. sum of Rs.............being the
compensation under hit and run provisions of the Motor Vehicles Act in full and final settlement
of my claim for the accident occurred to me/to the deceased person.......(name of deceased)
on............(date of accident) at............(name of place).
Signature on revenue stamp
by beneficiary/victim
WITNESS:
398
FORM III
[Clause 21 (2) (b)]
Claims enquiry report to be submitted by the Claims Enquiry Officer to the Claims
Settlement Commissioner
1. Name and address of the person dead/injured:
2. Place, time and date of the accident:
3. Particulars of the Police Station in which the accident was registered:
4. Particulars of the Medical Officer/Practitioner who examined the dead/injured:
5. Particulars of persons summoned and examined:
6. Whether the fact of death/injury by hit and run motor accident has been established or not and
the reason for coming to that conclusion:
7. The name and address of claimant(s) eligible for payment of compensation:
8. The amount of compensation recommended for payment to the claimant. (In case of more than
one claimant the amount each one of the claimants is eligible and the reasons thereof shall be
specified).
9. Any other information or records relevant or useful for the settlement of the claim.
Signature, designation
of the Claims Enquiry Officer.
Seal:
Date:
399
FORM IV
[Clause 22 (1)]
Serial No..............
Claims Settlement Commissioner
District.........................................
ORDER
I hereby sanction Rs. 8500/2000 (Rupees Eight Thousand Five Hundred only)/(Rupees Two
Thousand only) as compensation in respect of the death of .........(Name of deceased)/grievous
hurt to...........(Name of the injured) resulting from hit and run motor accidents which took place
at...........(Name of place) on.......(Date) to Shri/Shrimati/Kumari.......as legal representative of the
deceased (.......) or to.........(Name of injured).
Claims Settlement Commissioner
CC to:—
1. Office of the Insurance Company:
2. The Claimant;
3. Motor Vehicles Accident Claims Tribunals;
4. Claims Enquiry Officer;
5. General Insurance Corporation of India, Churchgate, Bombay-400020.
400
FORM V
[Clause 20(1)]
(Under section 162 of the Motor Vehicles Act, 1988)
I/We.........as legal representative(s) of the deceased/injured.................hereby give undertaking
that I/we shall refund the amount of compensation awarded to me/us under sanction order
No...........dated............. by the Claims Settlement Commissioner...........to the insurer in case I/we
am/are awarded any other compensation or amount in lieu of or by way of satisfaction of a claim
for compensation in respect of death or grievous hurt to...........under any other provisions of the
Motor Vehicles Act, 1988 or any other law for the time being in force or otherwise.
Signature of the legal representative
of the deceased/injured person.
—————
401
OVERALL DIMENSIONS OF MOTOR VEHICLES (PRESCRIPTION OF
CONDITIONS FOR EXEMPTION) RULES, 19911
In exercise of the powers conferred by section 110(3)(b) of the Motor Vehicles Act, 1988, the
Central Government hereby makes the following rules, namely:—
1. Short title and commencement.—(1) These rules may be called THE OVERALL
DIMENSIONS OF MOTOR VEHICLES (PRESCRIPTION OF CONDITIONS FOR EXEMPTION) RULES, 1991.
(2) They shall come into force on the date of their publication in the Official Gazette.
2. Conditions for the grant of exemption from rule 93.—The State Government may
exempt any motor vehicle or any class of description of motor vehicles from the provisions of
rule 93 of the Central Motor Vehicles Rules, 1989, subject to the fulfilment of any or all of the
conditions specified in these rules which that Government may deem fit to impose, namely:—
(1) Such motor vehicle or class of description of motor vehicles shall—
(a) observe such load restrictions as the State Government may by order specify in this
behalf,
(b) obtain the previous permission of such authority as may be specified by the State
Government in this behalf before putting such vehicles on the load;
(c) not, if they are loaded, travel over such bridges and cross-drainage structures on the
road, which the State Government may having regard to the safety of the road
structures specify;
(d) where prohibited under clause (c) to travel over the structure referred to in that clause,
the owner or transporter shall at his cost make arrangements to cross the rivers in
accordance with the directions given by the authority specified by the State
Government in this behalf;
(e) give advance intimation to such authority or officer specified in this behalf by the
State Government regarding the movement of such vehicle;
(f) equip with necessary warning signals such as red flags in the day time, red light and
reflectors in the night so as to indicate the extreme positions of the vehicle clearly;
(g) move without any hindrance to the normal flow of traffic;
(h) not exceed the speed limit of 16 kms. per hour.
(2) Where any damage is caused to the roads or road structures directly or indirectly due to
the movement of such vehicles, the operator of the vehicle or the transporter shall be liable to
pay such amount to the State Government as may be assessed by the authorities in this behalf.
(3) The State Government shall not be liable for any damage that may be caused to such
vehicles or their contents through their transits;
(4) Any grant of exemption under these rules shall be without prejudice to the right of the
authorities specified in this behalf by the State Government to regulate or stop the movement of
such vehicles having regard to the safety of roads, bridges, structures and other road users;
_____________________
1. Vide GSR 583(E), dated 12 th September,1991.
402
(5) The State Government may, in consultation with the operator of the vehicle or the
owner conduct route survey to assess the fitness of the roads for movement of such vehicles,
feasibility of negotiating the curves more particularly in built-up areas, sufficiency of road width,
adequacy of vertical clearance and any deficiencies identified in the assessment shall be rectified
by the operators or owners of the vehicles;
(6) Exemption granted under these rules shall be applicable only for operating such
vehicles on roads lying in the jurisdiction of the Public Works Department of the respective State
Government and operators of the vehicles or their owners thereof shall make their own
arrangements to obtain the approval of the other Departments of local body authorities for plying
on the roads lying within their jurisdiction.
1[3. Removal of doubts.—For removal of doubts, it is hereby declared that any exemption
granted under these rules in any State shall be valid throughout India.
_________________________________
1. Subs by GSR 634 (E),dated 23rd June,1992.
403
MOTOR VEHICLES (ALL INDIA PERMIT FOR TOURIST TRANSPORT
OPERATORS ) RULES, 19931
In exercise of the powers conferred by sub-section (14) read with sub-section (9) of section 88
of the Motor Vehicles Act, 1988 (59 of 1988), the Central Government hereby makes the
following rules, namely:—
1. Short title, extent, commencement and exemption.—(1) These rules may be called THE
MOTOR VEHICLES (ALL INDIA PERMIT FOR TOURIST TRANSPORT OPERATORS) RULES, 1993.
(2) They shall extend to the whole of India.
(3) They shall come into force with effect from the date of publication.
(4) The conditions prescribed in rules 82 to 85-A of the Central Motor Vehicles Rules,
1989 shall not apply to the permits granted under this scheme.
2. Definitions.—In these rules, unless the context otherwise requires,—
(a) “Act” means the Motor Vehicles Act, 1988 (59 of 1988),
(b) “Authorisation Certificate” means a certificate issued by an appropriate authority
to a recognised Tourist Operator authorising him to operate throughout the
territory of India or in such continuous States, not being less than three in number
including the State in which the permit is issued, on recognised tourist circuits, as
are specified in the All India Permit for a tourist vehicle granted to him;
(c) “Appropriate Authority” means the authority which is authorised under the Act to
grant a permit in respect of a tourist vehicle;
(d) “rule” means the rule of the Central Motor Vehicles Rules, 1989;
(e) “section” means section of the Act;
(f) “Schedule” means a Schedule appended to these rules;
2[(g) “Tourist Transport Operator” means,—
(a) a company or an individual engaged in a business of promotion of tourism by
providing tourist transport vehicles on tourist circuits; or
(b) any travel agency (who possesses his own vehicle or have taken a vehicle on lease
for this purpose for a period of at least one year) run by a company or an
___________________________________
1. Vide GSR 541 (E), dated 10th October,1993
2. Subs by GSR 286(E), dated 22nd March,1995.
404
individual provides all tickets for travel by air, rail, ship, passport, visa and also
arrange accommodation, tours, entertainment and other tourism related services;
or
(c) the tour operator (company or individual) who provides for transport,
accommodation, sight-seeing, entertainment and other tourist related services for
tourist, and who possesses his own vehicle or has taken a vehicle on lease for this
purpose for period of atleast one year and is recognised by the Department of
Tourism of the Government of India;
1[(h) “Tourist Circuit” means all places of tourist interest situated in a State for which
package tours are prepared and sold by the recognised tourist transport operator.
Explanation.—For the purpose of removal of doubts, it is clarified that the permit covering
such tourist circuits shall be valid throughout the State.]
3. Authorisation Certificate shall be issued only to a Tourist Transport Operator recognised by
the Department of Tourism of the Central Government.
4. Form, contents and duration, etc., of the Authorisation Certificate.—(1) Every
application for the issue of an Authorisation Certificate shall be made to the concerned State
Transport Authority, in the Form as set forth in the First Schedule.
(2) Every Authorisation Certificate shall be in the Form as set forth in the Second
Schedule.
(3) The period of validity of an Authorisation Certificate shall not exceed one year at a
time.
(4) The Authorisation Certificate may be renewed on an application made not less than
fifteen days before the date of its expiry.
5. Procedure of applying for and issue of Authorisation Certificate.—(1) An application
for an Authorisation Certificate may be made on any working day to the State Transport
Authority concerned.
(2) A State Transport Authority shall not ordinarily refuse to issue an Authorisation
Certificate applied for under these rules.
(3) Transport Authority may reject the application made under sub-rule (1) for good and
sufficient reasons to be recorded in writing, or where the Authority is of the opinion that this
would have the effect of increasing the number of Authorisation Certificates limited in terms of
section 74(3):
______________________
1. Ins by GSR 286 (E), dated 22nd March,1995
405
Provided that the Authorisation Certificate applied for shall be issued or refused within a
period of thirty days from the date of receipt of application by the State Transport Authority.
6. Transfer of permit.—(1) Save as otherwise provided in sub-rule (2), an Authorisation
Certificate shall not be transferable from one person to another except with the permission of the
State Transport Authority which issued the Authorisation Certificate and shall not, without such
permission, confer on any person to whom a vehicle covered by the Authorisation Certificate is
transferred, any right to use that vehicle in the manner authorised by the Authorisation
Certificate.
(2) Where the holder of an Authorisation Certificate dies, the person succeeding to the
possession of the vehicle covered by the Authorisation Certificate may, for a period of three
months, use the Authorisation Certificate from the date of death of the holder and on his own
intention to use the Authorisation Certificate:
Provided further that no Authorisation Certificate shall be so used, except after its renewal,
after the date on which it would have ceased to be effective in the hands of the deceased holder.
(3) The State Transport Authority may, on an application made to it within three months of
the death of the holder of an Authorisation Certificate, transfer the said certificate to the person
succeeding to the possession of the vehicle covered by the Authorisation Certificate:
Provided that the State Transport Authority may entertain an application made after the expiry
of the said period of three months if it is satisfied that the applicant was prevented for good and
sufficient cause from making an application within the specified time.
7. Replacement of vehicle.—The holder of an Authorisation Certificate may, with the
permission of the State Transport Authority by which the Authorisation Certificate was issued,
replace any vehicle covered by the Authorisation Certificate by any other vehicle of the same
nature.
Explanation.—The vehicle of same nature would mean having the same seating capacity for
which permit has been granted and composite fee paid and such a replacement vehicle could be
of any other make or model.
8. Appeals.—(1) Any person aggrieved by—
(a) the refusal of the State Transport Authority to issue an Authorisation Certificate
or by any condition attached to, an Authorisation Certificate issued to him; or
(b) the order of revocation or suspension of the Authorisation Certificate or by any
variation of the conditions thereof; or
(c) the order of refusal to transfer the Authorisation Certificate under rule 6 of these
rules or section 82; or
(d) the order of refusal to renew an Authorisation Certificate; or
406
(e) any other order which may be made,
may within a period of thirty days from the date on which the said order is communicated to the
applicant, appeal to the State Transport Appellate Tribunal constituted under sub-section (2) of
section 89 of the Motor Vehicles Act, 1988, who shall after giving such person and the State
Transport Authority an opportunity of being heard, give a decision thereon, which shall be final.
9. Authorisation fee.—The fee for the issue of an Authorisation Certificate shall be Rs. 500
per annum and every application for the issue or renewal of the same shall be accompanied by a
bank draft for the said amount in favour of the appropriate authority.
10. Seating capacity.—An All India Permit for Tourist Transport Operators shall be issued
only in respect of vehicles with a seating capacity of not more than 39 seats, excluding the driver
and the conductor. Besides, provision of rule 128 of the Central Motor Vehicles Rules, 1989,
except for sub-rule (11) of the said rules, shall also apply to the tourist vehicles.
11. Age of the tourist coaches.—An All India Permit for Tourist Transport Operators shall be
deemed to be invalid from the date on which the vehicle covered by the said permit completes
nine years, in the case of a motor cab and eight years in the case of a vehicle other than a motor
cab.
Explanation.—For the purpose of this rule, the period of nine or eight years shall be computed
from the date of initial registration of the tourist vehicle concerned.
1[12. Every motor vehicle or motor cab under the Authorisation Certificate issued under these
rules shall exhibit the words “All India Tourist Permit” on the back of the motor vehicle in
contrasting colours, so as to be clearly visible.]
13. List of tourists.—A tourist vehicle, other than a motor cab plying under an All India
Permit for a Tourist Transport Operator shall at all times carry a list of tourist passengers in
respect of each trip, and the list shall be produced on demand by the officers authorised to
demand production of documents by or under the Act or the rule made thereunder.
14. Quarterly return to be filed by an All India Tourist Permit Holders.—An All India
Tourist Permit Holder shall file a quarterly return, in respect of the motor vehicle covered by
these rules, in the Form set forth in the Third Schedule to the appropriate authority of the State
by which the All India Permit is granted and the said authority, in turn, shall forward copies
thereof to the appropriate authorities of other States concerned.
15. Certificate of Recognition.—(1) The eligibility conditions for a Certificate of
Recognition shall be as set forth in the Fourth Schedule.
(2) Every application for a Certificate of Recognition by the Department of Tourism,
Government of India, shall be submitted in the Form prescribed in the Fifth Schedule to the
Director General of Tourism, Department of Tourism, Government of India, New Delhi - 110
001.
____________________________
1. Subs by G.S.R. 444(E), dated 26th June,2007
407
(3) The Certificate of Recognition shall be granted in the Form prescribed in the Sixth
Schedule.
1[16. Conformity to mass emission standards.—The Tourist Transport Operator shall not
engage or use any vehicle for the purpose of journey, the origin and destination of which falls
within the National Capital Region, unless such vehicle conforms to the mass emission standards
(Bharat Stage-III) specified in sub-rule (14) of rule 115 of the Central Motor Vehicles Rules,
1989.]
______________________________________
1. Ins by G.S.R. 58 (E), dated 30.01.2009
408
THE FIRST SCHEDULE
[See rule 4 (1)]
FORM OF APPLICATION FOR ISSUE OF AN AUTHORISATION
CERTIFICATE
To
The State Transport Authority
..................................................
..................................................
I/We, the undersigned, hereby apply for the issue of an Authorisation Certificate valid throughout the
territory of India/in the State of........................................................
(Here, write the names of the States applicable)
1. Name of the applicant(s) in full
(starting with surname, if any) or …………………………….
Company
2. Name of father or husband …………………………….
(in the case of an individual)
3. Complete address …………………………….
4. Registration mark of the motor vehicle …………………………….
5. Engine number of the motor vehicle …………………………….
6. Chassis number of the motor vehicle …………………………….
7. Original permit number of the motor …………………………….
vehicle
8. Permit issuing authority of the motor …………………………….
vehicle
9. Make of the motor vehicle …………………………….
10. Registered laden weight of the motor …………………………….
vehicle.
11. Unregistered laden weight of the …………………………….
motor vehicle.
12. Particulars of the Certificate of …………………………….
Recognition issued by Deptt. of
Tourism, Government of India.
(Copy to be attached).
13. Year of manufacture of the motor
Vehicle
14. Period for which the Authorisation
Certificate is applied for .....From____________to____________
15. I/We enclose Bank Drafts as described hereunder towards payment of the Authorisation Fee:—
409
Name of the Amount paid Particulars of Date of
State Bank Draft and Date Payment
(1) (2) (3) (4)
(1)
(2)
(3)
(4)
(5)
Sd/-
Signature or thumb impression of
applicant(s) OR of the authorised
signatory with official rubber stamp
Date______________
*Strike out whichever is not applicable.
410
THE SECOND SCHEDULE
[See rule 4(2)]
AUTHORISATION CERTIFICATE
This Authorisation Certificate is valid throughout the States of_______________
(On the recognised tour circuits given below)
1. Name in full of the individual or Company
(Starting with surname, if any),
2. Complete address
3. Registration mark of the motor vehicle
4. Engine number of the motor vehicle
5. Chassis number of the motor vehicle
6. Permit number of the motor vehicle
7. Name of the permit issuing authority
8. Make of the motor vehicle
9. Registered laden weight of the motor vehicle
10. Unladen weight of the motor vehicle
11. Year of manufacture of the motor vehicle
12. Period of validity of the Authorisation
Certificate From_________ to________
(Seal of the Appropriate Authority)
(Signature of the Appropriate Authority)
(on the Reverse)
(Certificate of payment of composite fee)
S. Name of Amount Particulars Date of Period of
No. the State Paid of Bank Draft payment for which
& Date paid
(1) (2) (3) (4) (5) (6)
(1)
(2)
(3)
(4)
(5)
Signature and seal of the
Appropriate Authority
Place__________________
Date__________________
411
THE THIRD SCHEDULE
[See rule 14]
QUARTERLY RETURN
1. Name and complete address of the permit
Holder
2. Registration mark of the motor vehicle
3. Registration Number of All India Permit for
Tourist Transport Operator as given by
Department of Tourism, Government of India.
Summary of trips made during the quarter
Month Total distance covered Total distance of Remarks
in the State of* operation
(a)
(b)
(c)
Signature of the
All India Permit holder
Date________________
*Mention the names of the States applicable.
Note.—In the remarks column, state reasons for low or high running in any particular State or
States and any other factors which caused low or high operations.
412
1[FOURTH SCHEDULE
[See rule 15(1)]
A. ELIGIBILITY CONDITION FOR RECOGNITION AS APPROVED TOURIST
TRANSPORT OPERATOR
1. All applications for recognition shall be addressed to the Director-General of Tourism,
Transport Bhawan, No. 1, Parliament Street, New Delhi-110001.
2. (i) The applications for grant of recognition shall be in the prescribed form.
(ii) The applicant has been in the tourist transport hire business for a minimum period of 2
years at the time of application.
(iii) The Tourist Transport Operator has operated in the above 2 years period a minimum
number of 3 tourist permits issued by the concerned State Transport Authority/Road
Transport Authority for tourist vehicles. Out of these three tourist vehicles at least one
must be a car.
(iv) The applicant has adequate knowledge of handling the tourist transport vehicles for
transferring tourist from the Airport, Railway Stations, etc. and for sight-seeing of
tourists both foreign and domestic.
(v) The drivers of the tourist vehicles have proper uniform and adequate knowledge of
taking the tourist for sight-seeing,
(vi) The applicant has proper parking space for the vehicles.
(vii) The Tourist Transport Operator is registered with the appropriate authority for carrying
on the business of operating tourist transport vehicles.
3. (a) The two years period of operating the Tourist Transport business may be relaxable to 1
year in the case of those applicants who have operated 5 tourist vehicles with the proper
State Transport Authority/Road Transport Authority permits for 1 year. These 5 tourist
vehicles should be in any combination of cars/Air-conditioned Coaches/Mini Coaches
provided there are minimum of at least 2 cars in the fleet of tourist vehicles.
(b) For Ex-Defence personnel the condition of being in the business of tourist transport
vehicles for two years and having 3 vehicles is relaxable provided the candidate is
sponsored by the Director General of Resettlement, Ministry of Defence, New Delhi. In
the case of such personnel they can operate the tourist transport business with 1 tourist
vehicle only. However, the Ex-Defence personnel who apply under this scheme must
themselves operate the tourists transport business and should not be hiremen of other
Financiers.
(c) The condition of being in operation for 2 years’ period for tourist transport operator’s
approval may also be relaxable in the case of those applicants who have located their
business at the cities mentioned below:—
————
1. Schedules Fourth, Fifth and Sixth subs. by G.S.R. 286 (E), dated 22nd March, 1995 (w.e.f.
22-3-1995).
413
(i) Amritsar (Punjab)
(ii) Bodhgaya (Bihar)
(iii) Bhopal (Madhya Pradesh)
(iv) Bhubaneshwar (Orissa)
(v) Chandigarh
(vi) Goa
(vii) Hyderabad (Andhra Pradesh)
(viii) Hardwar (Uttar Pradesh)
(ix) Khajuraho (Madhya Pradesh)
(x) Port Blair (The Andaman and Nicobar Island)
(xi) Pathankot (Punjab)
(xii) Srinagar (Jammu & Kashmir)
(xiii) Tiruchirapalli (Tamil Nadu)
(xiv) Udaipur (Rajasthan)
(xv) Visakhapatnam (Andhra Pradesh)
4. The Tourist Transport Operation will be required to pay a non-refundable one time fee of
Rs. 500 while applying for the recognition. The fee will be made payable to the Pay and
Accounts Officer, Department of Tourism in the form of a Bank Draft.
5. The applicant should be income-tax assessee and should submit copy of acknowledgment
Certificate as proof having filed income-tax return for current assessment year.
1[6. The decision of the Department of Tourism, Government of India, in the matter of
recognition shall be final. The Government of India may in its discretion refuse to recognise any
Tour Operator or withdraw or withhold at any time recognition granted to any Tour Operator, but
before applying such discretion, it shall be lawful for the Government of India to issue show
cause notice to the aggrieved Tour Operator and to consider his reply on merit and to
communicate him the decision taken on such consideration.]
7. Recognition once granted shall continue unless revoked and subject to their continuance in
this business and their submitting the requisite return of Income-tax and other particulars.
8. Tourist Transport Operator granted recognition shall be entitled to such incentives and
concessions as may be granted by Government from time to time and shall abide by the terms
and conditions of recognition as prescribed from time to time.
______________________
1. Subs. by G.S.R. 83(E), dated 23rd February, 1998 (w.e.f. 23-2-1998).
414
B. ELIGIBILITY CONDITIONS FOR RECOGNITION AS APPROVED TRAVEL
AGENCY
1. All applications for recognition shall be addressed to the Director General of Tourism,
Transport Bhavan, No. 1, Parliament Street, New Delhi-110001.
2. The following conditions must be fulfilled by the Travel Agency for grant of recognition
by Department of Tourism:—
(i) The application for grant of recognition shall be in the prescribed form.
(ii) The Travel Agency has a minimum paid-up capital of Rs. 2.00 lakh duly supported by
the audited balance sheet/Chartered Accountant’s certificate.
(iii) The Travel Agency should be approved by International Air Transport Association
(IATA) or General Sales Agent (GSA) of an International Air Transport Association
member Airlines.
(iv) The Travel Agency has an office under the charge of a full time member of their staff,
who is adequately trained/experienced in matters regarding ticketing, itineraries,
accommodation facilities, currency, customs relations and other travel and tourism
related services.
(v) The Travel Agency has been in operation for a period of one year before the date of
application.
(vi) The Travel Agency is an income-tax assessee and has filed Income-tax Return for the
current assessment year.
3. Recognition as Travel Agency once granted shall continue unless withdrawn and subject to
their continued membership of International Air Transport Association or continuance as
General Sales Agent of an International Air Transport Association member airlines, as the case
may be, and their submitting the requisite annual return of Income-tax and other particulars.
4. The Travel Agency will be required to pay a non-refundable one time fee of Rs.1000/-
while applying for the recognition. The fee will be payable to the Pay and Accounts Officer,
Department of Tourism, in the form of a Bank Draft. Fee for recognition of each Branch Office
will be Rs. 500/-.
5. Recognition will be granted to the Headquarters office of the Travel Agency. Branch
Offices will be approved alongwith the contractors office or subsequently, provided the
particulars of Branch Offices are submitted to Department of Tourism and accepted by it.
6. The decision of the Department of Tourism, Government of India, in the matter of
recognition shall be final. The Government of India may, in their discretion refuse to recognise
any time or withdraw/withhold at any time recognition already granted without assigning any
reason.
7. Travel Agency granted recognition shall be entitled to such incentives and concessions as
may be granted by the Government of India from time to time and shall abide by the terms and
conditions of recognition as prescribed from time to time.
415
C. ELIGIBILITY CONDITIONS FOR RECOGNITION AS APPROVED TOUR OPERA-
TOR
1. All applications for recognition shall be addressed to the Director-General of Tourism,
Transport Bhawan, No. 1, Parliament Street, New Delhi-110001.
2. (i) The application for grant of recognition shall be in the prescribed form.
(ii) The Tour Operator should have a minimum paid-up capital of Rs. 1.00 lakh fully
supported by the latest audited balance sheet/Chartered Accountant’s Certificate.
(iii) The turn-over in terms of foreign exchange or Indian rupees by the firm from tour
operation only should be a minimum of Rs. 5.00 lakh duly supported by Chartered
Accountant’s Certificate.
(iv) The Tour Operator has an office under the charge of a full time member of their staff,
who is adequately trained/experienced in matters regarding transport,
accommodation, currency, customs regulations and General information about travel
and tourism related services.
(v) The Tour Operator should have been in operation for a minimum period of one year
before the date of application.
(vi) The Tour Operator will have to be Income-tax assessee and should have filed
Income-tax return for the current assessment year.
3. The recognition as approved Tour Operator once granted shall continue unless withdrawn
subject to their continuance in this business and their submitting the requisite annual return of
Income-tax particulars.
4. The Tour Operator will be required to pay a non-refundable one time fee of Rs. 1,000
while applying for the recognition. The fee will be made payable to the Pay and Accounts
Officer, Department of Tourism in the form of a Bank Draft. The fee for recognition of each
Branch Office will be Rs. 500.
5. Recognition will be granted to the Headquarters Office of Tour Operators. Branch Offices
will be approved alongwith the Head-Quarters office or subsequently, provided the particulars of
the Branch Offices submitted to Department of Tourism and accepted by it.
1[6. The decision of the Department of Tourism, Government of India, in the matter of
recognition shall be final. The Government of India may, in its discretion, refuse to recognise
any Tour Operator or withdraw or withhold at any time recognition granted to any Tour
Operator, but before applying such discretion, it shall be lawful for the Government of India to
issue show cause notice to the aggrieved Tour Operator and to consider his reply on merit and to
communicate him the decision taken on such consideration.]
7. Tour Operator granted recognition shall be entitled to such incentives and concessions as
may be granted by Government from time to time and shall abide by the terms and conditions of
recognition as prescribed from time to time by the Department of Tourism, Government of India.
—————
1. Subs. by G.S.R. 83(E), dated 23rd February, 1998 (w.e.f. 23-2-1998).
416
FIFTH SCHEDULE
[See rule 15(2)]
A. APPLICATION FORM FOR RECOGNITION AS APPROVED
TOURIST TRANSPORT OPERATOR
1. Name of the firm with address, telephone, telex and fax number.
2. Nature of the firm and date of registration/commencement of business with documentary
proof.
3. Whether the office is located in residential/commercial/industrial area.
4. Name, experience, qualifications of the proprietor/Managing Director.
5. Total number of staff including drivers.
6. Name of the Travel Agents/Tour Operators/Hotels/Airlines with whom most business is
transacted.
7. Please attach a copy of the audited balance sheet and profit and loss statement duly
certified by the Chartered Accountant for the year preceding the date of application alongwith
copy of acknowledgement certificate, in respect of Income-tax Return for current assessment
year.
8. Please indicate the loans and mortgages as on the date of application.
9. Number of vehicles viz., Air-conditioned coaches, non-Air conditioned Coaches, Mini
Coaches, Cars and Boats operated as tourist vehicles with their make, model and registration.
10. Attested copies of valid permits issued by Road Transport Authority/State Transport
Authority for tourist vehicles and Registered Certificate Books of Tourist vehicles should be fur-
nished.
11. Number and date of Bank Demand Draft for Rs. 500/- in favour of Pay and Accounts
Officer, Department of Tourism, New Delhi.
Signature................
Designation..........................
Rubber stamp of company...........
B. APPLICATION FORM FOR RECOGNITION AS APPROVED TRAVEL AGENCY
1. Name and address of Head Office and Branch Offices.
2. Nature of the firm and the year when the firm was registered or commenced business with
documentary proof.
3. Name of Directors/Partners etc. The details of their interests, if any, in other business may
also be indicated.
4. Give particulars of staff employed, their qualifications, experience, salary and length of
service with the firm.
417
5. Name of Bankers (Please attach a reference from your bankers).
6. Name of Audtors. A balance-sheet and profit and loss statement pertaining to the travel
business, as prescribed under Company Law, must be submitted by each applicant. These audited
statements should be in respect of your establishment for the last completed financial year or for
the calendar year immediately preceding the date of submission of your application. Also furnish
details of your turnover in the following statement:—
Name and particulars of the Travel Agency concerned
(a) Paid up capital
(b) Loans
(i) Secured
(ii) Unsecured
(c) Reserves
(d) Current liabilities and provision
(e) Fixed Assets (excluding Intangible assests)
(f) Investment
(g) Current Assets
(h) Intangible assets.
Total................
Notes.—(i) Reserves would include balance of Profit and Loss Account and would exclude
taxation reserve.
(ii) Current liabilities and provisions would include taxation reserve.
(iii) Current assets would include sundry debts, loans and advances, cash and bank
balance.
(iv) Intangible assets would include goodwill, preliminary expenses, tendency and
business rights, deferred Revenue expenditure accumulated loss, etc.
7. Copy of acknowledgement certificate in respect of Income-tax return for the current
assessment year should be enclosed.
8. Whether any other activities are undertaken by the firm besides travel related activities.
9. Please indicate the air/shipping/railway ticketing held by the firm.
10. Please indicate membership of International Travel Organisation, if any.
11. Letter of approval of International Air Transport Association and certificate of
endorsement for current year should be enclosed. General Sales Agents of any International Air
Transport Association Airlines should enclose documentary proof in this regard.
12. Please enclose a Demand Draft of Rs. 1000 for Head Office and Rs. 500 for each Branch
Office as fee for recognition, and mention the Demand Draft number, date and amount in this
column.
418
Signature of the Proprietor/Partner/Managing Director..........
Rubber Stamp................
C. APPLICATION FORM FOR RECOGNITION AS APPROVED TOUR OPERATOR
1. Name and address of Head Office and Branch Office.
2. Nature of the firm and the year when the firm was registered or commenced business, with
documentary proof.
3. Name of Directors/Partners, etc. The details of their interests, if any, in other business
may also be indicated.
4. Give particulars of staff employed, their qualifications, experience, salary and length of
service with the firm.
5. Name of Bankers (Please attach a reference from your bankers).
6. Name of Auditors. A balance-sheet and Profit and Loss statement pertaining to tour
operation business, as prescribed under Company Law, must be submitted by each applicant.
These audited statements should be in respect of your establishment for the last completed
financial year or for the calendar year immediately preceding the date of submission of your
application. Also furnish details of your turnover in the following statement:—
Name and particulars of the operator concerned:
(a) Paid up capital
(b) Loans
(i) Secured
(ii) Unsecured
(c) Reserves
(d) Current liabilities and provisions
(e) Fixed assets (excluding intangible assets)
(f) Investment
(g) Current Assets
(h) Intangible assets
Total:
Notes.— (i) Reserves would include balance of Profit and Loss Account and would exclude
taxation reserve.
(ii) Current liabilities and provisions would include taxation reserve.
(iii) Current assets would include sundry debts, loans and advances, cash and bank
balance.
(iv) Intangible assets would include goodwill, preliminary expenses, balance and business
rights, deferred revenue expenditure, accumulated loss, etc.
419
7. Copy of acknowledgement certificate in respect of income-tax return for the current
assessment year should be enclosed.
8. Whether any other activities are undertaken by the firm besides Tour Operation.
9. Member of International Travel Operations.
10. (a) Give details of volume of tourist traffic handled upto the date of application showing
foreign and internal tourist traffic separately. Please submit a certificate from
Chartered Accountant. This certificate should show the receipts from tour operation
only during the financial year or the calendar year immediately preceding the date of
submission of your application.
(b) Clientale : Special tourist groups handled, if any, their size, frequency, etc.
(c) Steps taken to promote domestic tourist traffic and details of groups handled if any.
(d) Special programmes, if any, arranged for foreign tourists.
11. Number of Conferences handled, if any, and the total number of passengers for such
Conferences with details of location, etc.
12. Number of incentive tours handled.
13. Please enclose a Demand Draft of Rs. 1,000 for Head Office and Rs. 500 for each Branch
office as fee for recognition and mention the Demand Draft Number, date and amount in this
column.
Signature of Proprietor/Partner/Managing Director
Rubber Stamp of the firm:
420
THE SIXTH SCHEDULE
[(See rule 15 (3)]
CERTIFICATE OF RECOGNITION
Number_____________________________Date_____________________________
Certified that_________________________________________________________
____________________________________________________________________
____________________________________________________________________
(Name and address of the Applicant)
is recognised by the Department of Tourism, Government of India, New Delhi as an
approved_______________________________________
Place__________________________________ Director General (Tourism).]
ANNEXURE I
421
THE DRIVING LICENCE (CONDITIONS FOR EXEMPTION) RULES, 19921
1 Short title and commencement. —These rules may be called the Driving Licence (Conditions
for Exemption) Rules, 1992.
2. Conditions for grant of exemption. —A person receiving instructions in driving a motor
vehicle shall be exempted during training, from the provisions of sub-section (1) of section 3 of
the Motor Vehicles Act, 1988 (59 of 1988), subject to the following conditions, that:—
(a) Such person is a trainee undergoing training in an Industrial Training Institute approved by
Central or State Government and driving a light motor vehicle with a written permission of
the head of an Industrial Training Institute;
(b) Such person is driving a motor vehicle under the supervision of a duly appointed instructor
holding a valid driving licence;
(c) Such person shall not give any vehicle other than light motor vehicle of the Industrial
Training Institute, specially acquired for such training purposes;
(d) Such person is medically fit to drive;
(e) The speed of the vehicle shall not exceed 15 kms. per hour during the training;
(f) The training shall be imparted only between 10 a.m. and 5 p.m.;
(g) The training shall be imparted only on a light motor vehicle.
----------
1. Vide G.S.R. 791 (E), dated 30th September, 1992, published in the Gazette of India,Extra., Pt.
II, Sec. 3(i), dated 30th September, 1992.
422
TYPES OF MOTOR VEHICLES AT A GLANCE1
In exercise of the powers conferred by sub-section (4) of section 41 of the motor vehicles
act, 1988 (59 of 1988) and in supersession of the notification of the government of india in
the erstwhile ministry of surface transport number no. S.o. 451 (e),
dated the 19th june, 1992, the central government hereby specifies the types of motor
vehicles as mentioned in columns 1 and 2 of the table below for the purpose of said sub-
section (4).
TABLE
Transport Vehicle Non-Transport Vehicle
(i) Motor cycle with side car for carrying
goods.
(ii) Motor cycle with trailer to carry
goods.
(iii) Motor cycle used for hire to carry
one passenger on pillion and
motorised cycle-rickshaw for goods
or passengers on hire.
(iv) Luxury Cab.
(v) Three wheeled vehicles for
transport of passengers/goods.
(vi) Goods carrier trucks or tankers or
mail carriers (N1-N3 category).
(vii) Power tiller and Tractors using
public roads.
(viii) Mobile clinic or X-Ray van or library
vans.
(ix) Mobile Workshops.
(x) Mobile canteens.
(xi) Private Service Vehicle.
i) Motor cycle with or without side car
for personal use.
(ii) Mopeds and motorised cycles
(Engine capacity exceeding 25 cc).
(iii) Invalid carriage.
(iv) Three-wheeled vehicles for personal
use.
(v) Motor car
. (vi)Fork lift.
(vii) Vehicles or trailers fitted with
equipments like rig, generator,
compressor.
(viii) Crane mounted vehicle.
(ix) Agricultural Tractor and Power
Tiller.
(x) Private service vehicle, registered
in the name of an individual and if
declared to be used by him solely
for personal.
(xi) Camper Van or Trailer for private
use.
423
(xii) Public Service Vehicle such as
maxi cab, motor cab, stage cariage
and contract carriage including
tourist vehicles.
(xiii) Educational Institution buses.
(xiv) Ambulances.
(xv) Animal Ambulances.
(xvi) Camper vans or trailers.
(xvii) Cash vans.
(xviii) Fire tenders, snorked ladders,
auxiliary trailers and fire fighting
vehicles.
(xix) Articulated vehicles.
(xx) Hearses.
(xxi) Omnibus+
(xii) Tow Trucks, Breakdown Van and
Recovery Vehicles.
(xiii) Tower Wagons and tree trimming
vehicles owned by Central, State
and local authorities.
(xiv) Construction Equipment
Vehicles as defined in rule
2(ca).*
(a) “Ambulance” means vehicle specially designed, constructed or modified and
equipped and intended to be used for emergency transportation of persons who are
sick, injured, wounded or otherwise incapacitated.
(b) “Animal ambulance” means a motor vehicle intended to be used for the
emergency transportation of sick, injured, wounded or otherwise incapacitated
animals.
(c) “Camper van” means a special purpose M 1 category vehicle constructed
to include living accommodation which contains at least the following equipment:
—
—
—
—
Seats and table
Sleeping accommodation which may be converted for the seats
Cooking facilities, and
Storage facilities.
This equipment shall be rigidly fixed to the living compartment; however, the
table may be designed to be easily removable.
+(d) The “Omnibus” has been kept in the category of transport vehicle with a view
to bringing it under the purview of fitness regime as it is exhaustively used on road.
However, the taxes to be levied on such vehicle would fall within the jurisdiction of
State Governments.
424
*(e) Under rule 2(ca), use of public road by Construction Equipment Vehicles is
incidental to the main off-road function. However, when the public road is being used
regularly for carrying on commercial activities, then Construction Equipment Vehicles
such as dumpers and excavators being used for such activities, shall be deemed as
transport vehicles.
----------
1. Vide S.O. 1248 (E), dated 5th November, 2004, published in the Gazette of India, Extra., Pt. II, Sec. 3(ii),
dated 5th November, 2004.
425
TABLE OF MAXIMUM SPEED LIMIT
AT A GLANCE1
In exercise of the powers conferred by sub-section (1) of section 112 of the Motor Vehicles Act,
1988 (59 of 1988), the Central Government hereby fixes the speed specified in column (2) of the
Table below as the maximum speed in respect of the class of motor vehicles specified in the
corresponding entry in column (2) thereof.
TABLE
Class of vehicles Maximum
speed per hour
in kilometres
(1) (2)
(1) If all the wheels of the vehicle are fitted with pneumatic tyres and the
vehicle is not drawing a trailer—
(a) if the vehicle is a light motor vehicle, other than transport vehicle;
(b) if the vehicle is a light motor vehicle, and a transport vehicle;
(c) if the vehicle is a motor cycle;
(d) if the vehicle is a medium or heavy passenger motor vehicle;
(e) if the vehicle is a medium or heavy goods vehicle.
No limit
65
50
65
65
(2) If the vehicle is an articulated vehicle, all the wheels of which are fitted with
pneumatic tyres, which is a heavy goods vehicle or heavy passenger motor
vehicle.
50
(3) If the vehicle is drawing not more than one trailer, or in case of artillery
equipment, not more than two trailers and all the wheels of that vehicle and
the trailer are fitted with pneumatic tyres—
(a) if the vehicle is a light motor vehicle and the trailer being two-wheeled
has gross vehicle weight not exceeding 800 kilograms
(b) if the vehicle is a light motor vehicle and the trailer has more than two
wheels or a gross vehicle weight exceeding 800 kilograms
(c) if the vehicle is a medium goods vehicle or medium passenger motor
vehicle.
(d) if the vehicle is a heavy goods vehicle or heavy passenger motor vehicle.
(e) if the vehicle is a heavy goods vehicle or heavy passenger motor vehicle
used by the fire brigade.
(4) Any other case not covered by entry (1), (2) or (3)
60
50
50
40
50
30
2. This notification shall come into force on the first day of July, 1989.
_________________________________
1. Vide S.O. 425(E), dated 9th June, 1989, published in the Gazette of India, Extra., Pt. II, Sec.
3(ii), dated 9th June, 1989.
426
REGISTRATION MARK FOR VEHICLES
AT A GLANCE1
In exercise of the powers conferred by sub-section (6) of section 41 of the Motor
Vehicles Act, 1988 (59 of 1988), the Central Government hereby allots to the States and Union
Territories specified in column (1) of the Table below, the groups of letters specified in the
corresponding entry in column (2) thereof, the use as registration mark for each State and Union
territory to be followed by the code number of the Registering Authority to be allotted by the
State Government or as the case may be, Administrator of the Union territory and not exceeding
four figures to be used as registration mark.
TABLE
State/Union Territories Group of letters
(1) (2)
1. Andaman and Nicobar AN
2. Andhra Pradesh AP
3. Arunachal Pradesh AR
4. Assam AS
5. Bihar BR
6. Chandigarh CH
2[6A. Chhattisgarh CG]
7. Dadra and Nagar Haveli DN
8. Daman and Diu DD
9. Delhi DL
10. Goa GA
11. Gujarat GJ
12. Haryana HR
13. Himachal Pradesh HP
14. Jammu and Kashmir JK
3[14A. Jharkhand JH]
15. Karnataka KA
16. Kerala KL
17. Lakshadweep LD
18. Madhya Pradesh MP
_____________________
1. Vide S.O. 444 (E), dated 12th June, 1989, published in the Gazette of India, Extra., Pt. II, Sec.
3(ii), dated 12th June, 1989.
2. Ins. by S.O. 1080 (E), dated 30th November, 2000.
3. Ins. by S.O. 14 (E), dated 5th January, 2001.
427
19. Maharashtra
MH
20. Manipur MN
21. Meghalaya ML
22. Mizoram MZ
23. Nagaland NL
24. Orissa OR
25. Pondicherry PY
26. Punjab PN
27. Rajasthan RJ
28. Sikkim SK
29. Tamil Nadu TN
30. Tripura TR
31. Uttar Pradesh UP
1[31A. Uttaranchal UA]
32. West Bengal WB
_____________________________
1. Ins. by S.O. 1080 (E), dated 30th November, 2000.
428
MAXIMUM SAFE AXLE WEIGHT AT A GLANCE1
In exercise of the powers conferred by sub-section (1) of section 58 of the Motor Vehicles
Act, 1988 (59 of 1988) and in supersession of the Government of India in the Ministry of Surface
Transport No. S.O. 690 (E), dated the 25th September, 1982, the Central Government hereby
specifies that in relation to the transport vehicles of all makes and models except motor cab, the
maximum safe laden weight of motor vehicles and maximum safe axle weight of each axle of
such vehicles shall be as follows, namely:—
(1) The maximum safe laden weight and the maximum safe axle weight of each axle in relation
to each make and model of such transport vehicle shall be as per the rating of the maximum safe
weight and the maximum axle weight of each axle fixed by the manufacturer.
(2) The maximum safe axle weight determined in para (1) shall be further restricted to the
maximum safe axle weight given in the Schedule.
(3) The maximum safe laden weight in respect of all such transport vehicles shall not be more
than the sum total of all the maximum safe axle weight put together.
SCHEDULE
The maximum safe axle weight shall be as follows:—
Tonnes
Single axle (Single wheel) fitted with 1 tyre 3.0
Single axle fitted with 2 tyres 6.0
Single axle fitted with 4 tyres 10.2
Tandem axle fitted with 8 tyres 19.0
2. This notification shall come into force on the first day of July, 1989.
—————
1. Vide S.O. 416(E), dated 9th June, 1989, published in the Gazette of India, Extra., Pt. II, Sec. 3
(ii), dated 9th June, 1989.
429
USE OF RED LIGHT ON THE TOP FRONT OF THE VEHICLE1
In pursuance of the powers under clause (iii) of proviso to rule 108 of the Central Motor
Vehicles Rules, 1989, the Central Government hereby specifies that a vehicle carrying high
dignitaries be permitted to use:-
(a) red light with flasher on the top front of vehicle, while on duty anywhere in the
country:-
(i) President;
(ii) Vice President;
(iii) Prime Minister;
(iv) Former President;
(v) Deputy Prime Minister;
(vi) Chief Justice of India;
(vii) Speaker of the Lok Sabha;
(viii) Cabinet Ministers of the Union;
(ix) Deputy Chairman Planning Commission;
(x) Former Prime Ministers;
(xi) Leaders of Oppositions in the Rajya Sabha & Lok Sabha;
(xii) Judges of the Supreme Court.
(b) red light without flasher on the top front of the vehicle, while on duty anywhere in the
country:-
(i) Chief Election Commissioner;
(ii) Comptroller & Auditor General of India;
(iii) Deputy Chairman Rajya Sabha;
(iv) Deputy Speaker, Lok Sabha;
(v) Ministers of State of the Union;
(vi) Members of the Planning Commission;
(vii) Attorney Journal of India;
(viii) Cabinet Secretary;
(ix) Chiefs of Staff of the three Services holding the Rank of full general or
equivalent rank;
430
(x) Deputy Ministers of the Union;
(xi) Officiating Chiefs of Staff of the three services holding the rank of Lt. General of
equivalent rank.
(xii) Chairman Central Administrative Tribunal;
(xiii) Chairman Minorities Commission;
(xiv) Chairman, Scheduled Castes and Scheduled Tribes Commission;
(xv) Chairman, Union Public Service Commission;
(xvi) Solicitor General of India.
a. Any vehicle carrying the dignitary formally designated as equivalent in rank, status and
privileges to those dignitaries referred to in items (a) and (b) shall be entitled to use the
red light as per the corresponding privileges. The vehicle carrying the dignitaries
assigned rank in their personal capacities by the Ministry of Home Affairs shall be
entitled to use red light as per the corresponding privileges assigned to those dignitaries
referred to in items (a) and (b) above.
b. In case the vehicle fitted with red light on top front is not carrying the dignitaries, then
such red light shall not be used and be covered by a black cover.
c. The State Governments and Union Territory Administrations shall issue similar
notifications on the use of red light in respect of high dignitaries of their State
Governments or Union Territory Administrations, such as Governor, Lt. Governor, Chief
Minister, Chief Justices and Judges of High Courts, Chairman, Speaker and Cabinet
Ministers of State/ Union Territory Legislatures etc. as the case may be.
431
RENT A MOTOR CYCLE SCHEME, 19971
In exercise of powers conferred by section 75 of the Motor Vehicles Act, 1988 (59 of
1988), Central Government hereby makes the following scheme for regulating the business of
renting of Motor Cycles to persons desiring to drive the motor cycles for their own use and
matters connected therewith, namely:—
1. Short title, commencement and application.—(i) This scheme may be called Rent a Motor
Cycle Scheme, 1997.
(ii) It shall come into force on the date of its publication in the Official Gazette.
(iii) It shall apply to motor cycles to which permits have been issued under sub-section (1) of
section 74 of the Act and operating under a licence granted in terms of para 6.
2. Definitions.—In this scheme unless the context otherwise requires:—
(i) “Act” means Motor Vehicles Act, 1988 (59 of 1988);
(ii) “Form” means a form appended to this scheme;
(iii) “licence” means a licence granted or renewed under paragraph 6 to engage in the
business of renting of motor cycles to persons desiring to drive the motor cycles
themselves for their own use;
(iv) “licensing authority” means the State Transport Authority constituted under sub-
section (1) of section 68 of the Act;
(v) “operator” means the holder of permit issued under sub-section (1) of section 74 of
the Act in respect of not less than 5 motor cycles;
(vi) “scheme” means the Rent a Motor Cycle Scheme, 1997.
3. Licensing of operator.—No person shall engage himself in the business of renting a motor
cycle under this scheme without a licence.
4. Application for grant or renewal of licence.—An application for the grant or renewal of a
licence under paragraph 6 shall be made in Form 1 to the licensing authority having jurisdiction
in the area in which he resides or has his principal place of business and shall be accompanied by
a fee of rupees one thousand.
5. Scrutiny of application.—A licensing authority shall, before granting or renewing a licence
take into consideration the following, namely:—
(i) That the applicant has a good moral character and has intimate knowledge of
passenger transport business;
(ii) That the applicant has necessary facilities for the housing, maintenance and repair of
his vehicles, sanitary block and reception room;
(iii) That the applicant has at least one telephone which is accessible throughout day and
night;
(iv) That the financial resources of the applicant are sufficient to provide for the continued
maintenance of motor cycle and for the efficient management of the establishment;
____________________________________
1. Vide S.O. 375 (E), dated 12th May, 1997, published in the Gazette of India, Extra., Pt. II, Sec. 3(ii), dated 12th May, 1997.
432
(v) That the applicant maintains not less than 5 motor cycles duly covered by permits
issued under sub-section(1) of section 74 of the Act, with comprehensive insurance,
fitness certificates, motor vehicle tax paid upto date.
6. Grant of licence.—The licencing authority may, on receipt of an application under paragraph
4 and after satisfying himself that the applicant has complied with the requirements of paragraph
5, grant or renew the licence in Form 2:
Provided that no application for licence shall be refused by the licensing authority unless
the applicant is given an opportunity of being heard and reasons for such refusal are given in
writing by the licensing authority.
7. Duration of licence.—A licence granted or renewed under paragraph 6 shall be valid for a
period of five years from the date of grant or renewal.
8. General conditions to be observed by the holder of the licence.—The holder of the licence
shall,—
(i) maintain a register with a separate page for each vehicle containing the particulars
specified in Form 3 and where a motor cycle is hired by a foreign national, shall maintain
a register in Form 4;
(ii) not shift the principal place of business mentioned in the licence without the prior
approval in writing of the licensing authority which granted the licence;
(iii) keep the premises and all the records and registered maintained and the motor cycles
open for inspection at all reasonable times by the licensing authority or by any person not
below the rank of motor vehicle inspector as may be authorized in this behalf by the
licencing authority;
(iv) submit from time to time, to the licensing authority such information and return as may
be called for by it;
(v) display at prominent place in its main office and its branch office, the licence issued in
original and certified copies thereof, attested by the licensing authority;
(vi) maintain in their main office and branch offices at a conspicuous place a "Complaint
Book" in the Form 5 with serially numbered pages in triplicate. The licensee shall
despatch the duplicate copy of complaint, if any, to the licensing authority by registered
post expeditiously and in any case not later than 3 days;
(vii) maintain a suggestion box in the main office and branch offices and forward their
suggestion received with their comments, if any, to the licensing authority once a month.
9. Collection of hire charges.—The holder of a licence shall collect the hire charges from a
foreign national or non-resident Indian only in foreign exchange and shall hold for the purpose a
licence to transact in foreign exchange.
10. Duties and responsibilities of the hirer of motor cycles.—(1) It shall be the duty of every
hirer to keep the holder of the licence, informed of his movements from time to time.
433
(2) If an individual or company has hired the vehicle, as leader of the tourist party, it shall be the
duty of such leader of the party to keep the holder of the licence informed of the movements of
each vehicle, from time to time.
11. Power of licensing authority to suspend or cancel the licence.—(1) The licensing
authority shall, on being satisfied after giving the holder of the licence, an opportunity of being
heard, that he has—
(i) failed to comply with the provisions of paragraph 8 or 9; or
(ii) failed to maintain the motor cycle in compliance with the provisions of the Act and
rules; or
(iii) any one of his employees has misbehaved with customers; or
(iv) any complaint againt the licences by any hirer has been proved beyond reasonable
doubt, suspend the licence for specified period or cancel the licence.
(2) Where the licence is liable to be cancelled or suspended and the licensing authority is of
opinion that having regard to the circumstances of the case, it would not be necessary or
expedient to cancel or suspend the licence; if the holder of the licence agrees to pay the fine that
may be imposed by the licensing authority, then notwithstanding anything contained in clause
(1), the licensing authority may, instead of cancelling or suspending the licence as the case may
be, recover from the holder of the licence, the said fine.
(3) For the purpose of recovery of the sum of money agreed upon, the State Government may, by
notification in the Official Gazette, specify the amount recoverable for each day of suspension of
the licence and specify the time within which the sum of money agreed upon is payable, failing
which the orders passed under clause (1) shall be implemented.
(4) When the licence is suspended or cancelled under clause (1), the holder of the licence shall
surrender the licence to the licensing authority.
1[12. Appeals.—Any person aggrieved by any order of the licensing authority under Paragraph 6
or Paragraph 11, may within thirty days of the receipt of the order, appeal to the State Transport
Appellate Tribunal].
13. Procedure for appeal.—(1) An appeal under rule 12 shall be preferred in duplicate in the
form of a memorandum setting forth the ground of objection, to the order of the licensing
authority and shall be accompanied by a fee as may be specified by the State Government, by
notification in the Official Gazette.
1[(2) The State Transport Appellate Tribunal may after giving an opportunity to the parties to be
heard and after such enquiry as it may deem necessary, pass appropriate orders.]
(3) The State Transport Appellate Tribunal shall dispose of an appeal under Paragraph 12 within
a period of ninety days from the date on which such appeal is filed;].
14. Voluntary surrender of the licence.—The holder of a licence may at any time surrender the
licence issued to him by the licensing authority which granted the licence and, on such surrender
the licensing authority shall cancel the licence. The holder of the licence before surrendering the
licence shall clear the dues referred to in clause (2) of paragraph 11.
__________________________________
1. Subs. by S.O. 257 (E), dated 26th March, 1998 (w.e.f. 26-3-1998).
434
FORM 1
[See paragraph 4]
Application for grant or renewal of licences for renting motor cycles
To
The Transport Authority
................................... State/UT
I, the undersigned, hereby apply for a licence for renting motor cycles in the State of
...............................................................................................................................
1. Full Name ...............................................................................................................
Son/Wife/Daughter of..........................................................................................
2. (a) Full Address .....................................................................................................
(b) Telephone No. .............................................................................................
3. Age ..........................................................................................................................
4. (a) Experience in management of transport business .....................................
(b) Number of motor cycles held with valid permits .....................................
5. Particulars of licence, if already held .................................................................
6. (a) Place where the applicant has his main office with detailed address .............
(b) Place where the applicant has his branch office with detailed address .............
(c) The number of motor cycles to be stationed in each branch office ...................
7. Nature and extent of financial resources of the applicant ....................................
8. Particulars of motor cycles owned alongwith details of registraton mark
............................................................................................................................................
9. Full description of the place where the business is to be carried on ................
(a) Location, open area, covered area.
(b) Any other particulars.
10. I am conversant with the conditions for carrying the business for renting of motor cycles.
11. I hereby declare that to the best of my knowledge and belief the particulars given above are
correct and true.
The prescribed fee of rupees one thousand is paid* .............................................
Place : Signature of Applicant
Dated :
*(Here indicate the mode of payment)
435
FORM 2
[See paragraph 6]
Licence of renting motor cycles
1. Name of the operator ........................................................................................
2. Son/Wife/Daughter of ........................................................................................
3. Full address of the place of business ................................................................
4. Registration mark of motor cycles authorised for renting
Main Office Branch Office
1. 2. 3.
4. 5. 6.
7. 8. 9.
10. 11. 12.
is licensed to rent motor cycle.
This licence is issued on ..................................... and is valid upto ..........................
State Transport Authority
.......................... State/UT
Renewal
Renewed from ............................................................................ to ...........................
State Transport Authority
.......................... State/UT
436
FORM 3
[See paragraph 8(i)]
Register to be maintained by Rent a motor cycle Licensee
Si . No Name of Hirer Full Address Telephone No. if any Motor Driving
Licence No
1 2 3 4 5
Issued by
(Authority)
Class of vehicle Date of issue Date of Expiry Date and Time of
hire
6 7 8 9 10
Date and Time of
returning vehicle
Motor vehicle used for
total kilometers
Signature of Hirer Remarks
11 12 13 14
437
FORM 4
[See paragraph 8(i)]
Register to be maintained by rent a motor cycle licensee in case
where the motor cycle is hired to a foreigner
Sl.
No.
Name of
Hirer
Full
Address
Telephone
No. if
any
Motor
Driving
Licence
No.
Issued by
(Authority)
Class of
vehicle
1 2 3 4 5 6 7
Date of
issue
Date of
Expiry
Passpo
rt
No.
Issued by
Authority
and
State/Nati
Date
of
issue
of
Date
of
Expir
y
Date of birth as
per passport
8 9 10 11 12 13 14
Driving
permit
No. if
any
Date of
issue of
Driving
permit
Class of
vehicle
Authorised
to drive
Date and
Time of
Hire
Date and
time of
returning
vehicle
Motor
vehicle
used for
total
k
Signa-
ture of
Hirer
Rem-
arks
15 16 17 18 19 20 21 22
438
FORM 5
[See paragraph 8(vi)]
(With pages serially numbered in triplicate)
1. Name of complainant ..............................................................................................
2. Full address ............................................................................................................
3. The name and address of the holder of the licence for rent a motor cycle .........
4. Licence number, and authority which issued the licence .................................
5. The date and time of hiring the vehicles and date and time when the vehicle was returned
.......................................................................................................................
6. Vehicle number .....................................................................................................
Complaint in brief ................................................................................................
Date :
Place : Signature
1. The licensing authority by registered post .................... (duplicate Copy)
2. The complainant ............................................................. (triplicate Copy)
439
THE LIQUEFIED PETROLEUM GAS (REGULATION OF USE
IN MOTOR VEHICLES) ORDER, 20011
[1st August, 2001]
In exercise of the powers conferred by section 3 of the Essential Commodities Act, 1955
(10 of 1955), the Central Government hereby makes the following Order, namely:—
1. Short title and commencement.—(1) This Order may be called the Liquefied Petroleum Gas
(Regulation of Use in Motor Vehicles) Order, 2001.
(2) It extends to the whole of India.
(3) It shall come into force on the date of its publication in the Official Gazette.
2. Definitions.—In this Order, unless the context otherwise requires,—
(a) ‘Chief Controller of Explosives’ shall have the same meaning assigned to it as in the
Explosives Act, 1884 (4 of 1884);
(b) “consumer” means a registered owner of a motor vehicle or a person having in his
possession a motor vehicle or vehicle fitted with an auto LPG tank, and a conversion kit
as notified by the Government of India in the Ministry of Surface Transport, and runs
such motor vehicle or vehicle by using auto LPG as automotive fuel alone or with some
other petroleum fuel.
(c) “auto LPG tank” means a steel container for storage and transport of automotive liquefied
petroleum gas (auto LPG) fitted permanently in a motor vehicle or vehicle as its fuel
tank, for automotive fuel and filled in that position, having a volume exceeding 500
milliliters but less than 1000 liters, as approved by the Chief Controller of Explosives
under Gas Cylinder Rules, 1981 as amended from time to time conforming to Indian
Standard specification No. IS: 14899, as amended from time to time;
(d) “Government Oil Company” means an oil refining company or oil marketing company
which is a Government Oil Company as defined in section 617 of the Companies Act,
1956 (1 of 1956), such as—
(i) Bharat Petroleum Corporation Limited.
(ii) Bongaigaon Refinery and Petrochemicals Limited.
(iii) Chennai Petroleum Corporation Limited.
(iv) Gas Authority of India Limited.
(v) Hindustan Petroleum Corporation Limited.
(vi) Indian Oil Corporation Limited.
(vii) IBP Co. Limited.
(viii) Kochi Refineries Limited.
(ix) Numaligarh Refinery Limited.
____________________________
1. Vide G.S.R. 569 (E), dated 1st August 2001, published in the Gazette of India, Extra.,
Pt. II, Sec. 3(i), dated 1st August, 2001.
440
(x) Oil India Limited;
(xi) Oil and Natural Gas Corporation Limited; or
(xii) any other Government Company or a statutory body or a company or a firm,
declared as such by a notification in the Official Gazette, to be a ‘Government Oil
Company’ by the Central Government, for the purposes of this Order;
(e) “Indian Standard” shall have the same meaning assigned to it in clause
(g) of section 2 of the Bureau of Indian Standards Act, 1986 (63 of 1986);
(f) “auto liquefied petroleum gas (auto LPG)” means a mixture of certain light hydrocarbons
derived from petroleum, which are gaseous at normal ambient temperature and
atmospheric pressure but may be condensed to the liquid state at normal ambient
temperature by the application of moderate pressure, and which conforms to Indian
Standard Specification No. IS:14861, as amended from time to time;
(g) “parallel marketeer for auto LPG” means any person, firm, company, institution,
association of persons, co-operative society or organization other than the Government
Oil Companies carrying on any or all of the business of importing (including Auto LPG
Import Substitution), storing, marketing, distributing and selling auto LPG for automotive
purpose under the parallel marketing system and having a rating certificate as specified in
Schedule II;
(h) “Government Oil Company system” means the system under which a Government Oil
Company carries on any or all of the business of importing (including Auto LPG Import
Substitution), storing, distribution or selling LPG for automotive purpose through
dispensing stations;
(i) “parallel marketing system for auto LPG” means the system, other than the system being
followed by the Government Oil Companies in marketing auto LPG, under which a
parallel marketeer carries on any or all of the business of importing (including Auto LPG
Import Substitution), storing, distribution or selling auto LPG through dispensing stations
under his own arrangement;
(j) “auto LPG Import Substitution” means import of auto LPG by Government oil
company/parallel marketeer substituted by—
(i) indigenous LPG production from specific refineries/fractionators as authorised by
Central Government from time to time;
(ii) LPG through petrochemical units as authorised by Central Government from time to
time, conforming to Indian Standard Specification IS: 14861 as amended from
time to time.
(k) “auto LPG dispensing station” means the premises used for storing and dispensing auto
LPG to the motor vehicles for automotive purpose;
441
(l) “auto LPG dispensing station dealer” means a person, firm, association of persons,
company, institution, organization or a co-operative society appointed by a Government
Oil Company or a parallel marketeer and engaged in the business of purchase, storage
and sale of auto LPG and licensed by the Chief Controller of Explosives under the Static
and Mobile Pressure Vessels (Unfired) Rules, 1981 as amended from time to time;
(m) “conversion kit/original equipment manufacturer (CEM) fittings” means a complete
system assembly duly tested by one of the testing agencies mentioned in the *Central
Motor Vehicles (3rd Amendment) Rules, 2001, and approved by the Ministry of Road
Transport and Highways in a bi-fuel mode;
(n) “motor vehicle” or “vehicle” shall have the same meaning assigned to it in sub-section (28)
of section 2 of the Motor Vehicles Act, 1988 (59 of 1988); as amended from time to time.
(o) “Schedule” means a Schedule appended to this Order.
3. Restriction on unauthorised acquisition or sale of auto LPG.—(1) No person shall acquire,
sell, store for sale, supply, fill or distribute auto LPG to a consumer except according to the
provisions contained in this Order.
(2) No person shall store, supply, sell or dispense auto LPG unless he is a auto LPG dispensing
station dealer.
(3) No person shall purchase or use auto LPG in a motor vehicle or vehicle unless it is fitted with
the auto LPG tank permanently fitted in the motor vehicle and a conversion kit as approved by
the authorities/testing agencies as notified in the *Central Motor Vehicle (3rd Amendment)
Rules, 2001;
(4) No auto LPG dispensing station dealer or any other person acting on his behalf shall fill the
auto LPG tank permanently fitted in the motor vehicle in excess of eighty per cent. of its total
volumetric capacity.
(5) No auto LPG dispensing station dealer shall dispense auto LPG to any consumer using motor
vehicle fitted with auto LPG tank permanently fitted in the motor vehicle and conversion/OEM
dual fuel kit, which is not approved as per subparagraph 3.
(6) No auto LPG dispensing station dealer shall dispense auto LPG unless received from
Government Oil Companies/parallel marketeers and conforming to auto LPG specification, i.e.,
Indian Standard Specification No. IS: 14861 as amended from time to time.
4. Display of stock and price of auto LPG.—Every auto LPG dispensing station dealer shall
prominently display the stock and selling price of auto LPG at a conspicuous place of the auto
LPG dispensing station.
________________________________
* In the Gazette Notification No. G.S.R. 569(E), dated 1st August, 2001 the nomenclature of the
rules has been stated as “Central Motor Vehicles Rules, 2001” whereas it ought to have been
“Central Motor Vehicles (3rd Amendment) Rules, 2001”, Ed.
442
5. Procurement, storage and sale of auto LPG by the auto LPG dispensing station dealer.—
(1) Every auto LPG dispensing station dealer shall procure or purchase auto LPG from either a
Government Oil Company or a parallel marketeer.
(2) Every auto LPG dispensing station dealer shall display the working hours prominently at the
place of auto LPG dispensing station at a conspicuous place.
(3) No auto LPG dispensing station dealer having stock of auto LPG at the auto LPG dispensing
station including the storage point, shall, unless otherwise directed by a Government Oil
Company or a parallel marketeer, refuse to sell auto LPG on any working day during working
hours to a consumer.
(4) No auto LPG dispensing station dealer shall keep the auto LPG dispensing station premises
including the storage point closed during working hours, on any day without the prior written
permission of the Government Oil Company or a parallel marketeer.
Explanation.—For the purpose of sub-paragraphs (2), (3) and (4), the expression ‘working hours’
means the working hours fixed by the concerned Government Oil Company or a parallel
marketeer in accordance with the provisions of the Shops and Establishments Acts, and the rules
made thereunder, as in force in the respective States or Union territories, as the case may be.
(5) Every auto LPG dispensing station dealer shall take steps to ensure adequate availability of
stocks of auto LPG at the auto LPG dispensing station at all times.
(6) No auto LPG dispensing station dealer shall sell auto LPG at a price higher than that fixed by
the Government Oil Company or a parallel marketeer, as the case may be.
6. Assessment and certification rating of parallel marketeers.—(1) (a) No parallel marketeer
shall commence any activity, such as, import (including Auto LPG Import Substitution),
transport, marketing, distribution, sale or any activity incidental thereto, relating to the business
of auto LPG to be used as automotive fuel without obtaining a minimum of low risk rating
certificate, on the basis of evaluation and rating for his capability, infrastructure network and
readiness to carry out professed business and delivery of goods and services promised by him by
an agency specified in Schedule I:
Provided that a parallel marketeer carrying on the business of transportation, marketing,
distribution or selling of auto LPG for automotive fuel, as an agent of another parallel marketeer,
who has obtained a minimum of low risk rating certificate, shall not be required to obtain a rating
certificate.
Explanation.—For the purpose of this sub-paragraph, a parallel marketeer shall be an
agent of another parallel marketeer if the former is appointed as such, for the above purposes by
the latter through a legal instrument.
(b) The rating certificate shall be issued in the format as specified in Schedule II and as
per the forwarding letter given in Schedule IV.
(2) The rating certificate shall—
443
(i) be valid for a period of two years in case of ‘Good’ and ‘Satisfactory’ rating and one year
in case of other ratings from the date of its issue, and
(ii) require renewal by the rating agency.
(3) Every parallel marketeer announcing details of his activity or inviting offers of any kind in
the field of import (including Auto LPG Import Substitution), transport, marketing, distribution
or sale of auto LPG for automotive fuel, either in a newspaper, handout, pamphlet, leaflet or by
any other means of communication or advertising shall indicate the rating awarded to him in
words, i.e., Good, Satisfactory, Low-Risk, High Risk, whichever is applicable, and prominently
publish the rating certificate, as given by the rating agency.
(4) There shall be paid in respect of every application to a rating agency—
(i) for the rating certificate awarded to the parallel marketeer, a fee at the rate of 0.05% of
the project cost, subject to a minimum of rupees fifty thousand and maximum of rupees
ten lakh; and
(ii) for the renewal of the rating certificate by the parallel marketeer, a fee of one-tenth of
that required to be paid for such a certificate;
(iii) The renewal of rating certificate by the parallel marketeer shall be as per the following
periodicity, namely:—
(a) once in two years, for those having ‘Good’ and ‘Satisfactory’ rating certificate in
the previous year;
(b) once in a year for those having rating certificate other than ‘Good’ and
‘Satisfactory’ in the previous year.
(5) The agencies given in Schedule I for the purpose of evaluation shall, on payment of fee by
the parallel marketeer, evaluate the parallel marketeer whose case is either referred to it or who
approaches it, on the basis of the parameters indicated and the information provided by such
parallel marketeer in the format as specified in Schedule III or such other information as may be
required by the rating agency.
(6) Every parallel marketeer shall file a certified true copy of the certificate of rating with the
Ministry of Petroleum and Natural Gas, Oil Co-ordination Committee,Ministry of Food and Civil
Supplies of the Central and the State Government and Collector of the District in which he
imports (including Auto LPG Import Substitution),transports, markets, distributes or sells auto
LPG for automotive fuel.
(a) All letter-heads or communications of a parallel marketeer shall have the following
description of rating, namely:—
(i) Name of the rating agency,
(ii) Rating awarded to him, and
(iii) Date of Issue.
444
(b) No parallel marketeer shall either give incomplete, incorrect, misleading, vague
information in the newspaper, handout, pamphlet, leaflet oradvertisement or submit such
information to the rating agency.
7. Maintenance of registers, account books and submission of return by the dealer.—Every
auto LPG dispensing station dealer shall maintain accounts of daily purchase, sale and storage of
auto LPG as an automotive fuel at the auto LPG dispensing station and/or storage point,
indicating therein the opening and closing stock of auto LPG and such other relevant particulars
as the Government Oil Company or the parallel marketeer may, by order, in writing, specify.
8. Maintenance of records and furnishing of information by parallel marketeers.—(1)
Every parallel marketeer before commencing the import (including Auto LPG Import
Substitution), transportation, marketing, distribution or sale of auto LPG as an automotive fuel
shall intimate to the Ministry of Petroleum and Natural Gas, all or any of the above activities
which he intends to undertake, specifying therein capability to do so, and any other relevant
particulars.
(2) Every parallel marketeer shall submit a monthly return before the 15th day of the following
month giving details of auto LPG imported port-wise (including Auto LPG Import Substitution,
source-wise) to the Ministry of Petroleum and Natural Gas/Oil Co-ordination Committee.
(3) Every parallel marketeer shall furnish to the Ministry of Petroleum and Natural Gas, or to
such authority as may be specified by the Central Government, such information as may be
required.
9. Power of entry, search and seizure.—(1) Any Officer of the Central or the State
Government, not below the rank of Inspector duly authorised by general or special order by the
Central Government or State Government, as the case may be, or any Officer of a Government
Oil Company not below the rank of Sales Officer, authorized by the Central Government, may,
with a view to securing due compliance with the provisions of this Order or for the purpose of
satisfying himself that this order or any other order made thereunder has been complied with—
(a) enter and search any place or premises being made use of or suspected to be made by use
by a dealer parallel marketeer, transporter, consumer or any other person who is an
employee or agent of such dealer or transporter or consumer or parallel marketeer or any
other person, with respect to which there is reason to believe that the provisions of this
order have been or are being or are about to be contravened;
(b) stop and search any vessel or vehicle or receptacle used or capable of being used for the
transport or storage of auto LPG;
(c) inspect any book of accounts or other documents or any stock of the product used or
suspected to be used in the business of the dealer, parallel marketeer, transporter,
consumer or any other person suspected to be an employee or agent of the dealer,
transporter, parallel marketeer or consumer;
(d) seize stocks of the products which he has reason to believe has been or is being or is
about to be used in contravention of this Order and take or authorise the taking of all
445
measures necessary for securing the production of stocks or items so seized before the
Collector having jurisdiction under the provisions of the Essential Commodities Act,
1955 (10 of 1955) and for their safe custody pending such production;
(e) while exercising the power of seizure under item (d) of sub-paragraph (1), the authorised
officer shall record in writing the reasons for doing so, a copy of which shall be given to
the dealer, parallel marketeer, transporter, consumer or any other concerned person.
(2) The sales officer of a Government Oil Company shall be authorized, to secure compliance of
this Order, by the auto LPG dispensing dealers appointed by the Government Oil Companies.
(3) The provisions of section 100 of the Code of Criminal Procedure, 1973 (2 of 1974), relating
to search and seizure shall, as far as may be, apply to searches and seizures under this Order.
10. Overriding effect of the Order.—The provisions of this Order shall have overriding effect
notwithstanding anything contained in any other Order made by a State Government or a Union
territory Administration.
11. Power to exempt.—The Central Government may, if it considers necessary, for avoiding
any hardship or in consideration of public interest by notification in the Official Gazette, exempt
any person or class of persons from all or any of the provisions of this Order, either generally or
for any specific purpose, subject to such conditions as may be specified in the notification.
12. Repeal and savings.—The Liquefied Petroleum Gas (Restriction on Use) Order, 1974 is
hereby repealed:
Provided that such repeal shall not effect:—
(a) the previous operations of the said Order or anything duly done or suffered therein; or
(b) any right, privilege, obligation or liability acquired, accrued or incurred under the said
Order; or
(c) any penalty, forfeiture or punishment incurred in respect of any offence committed
against the said Order; or
(d) any investigation, legal proceedings or remedy in respect of any such right, privilege,
obligation, liability, penalty, forfeiture or punishment as aforesaid, and any such
investigation, legal proceeding or remedy may be instituted, continued or enforced and
any such penalty, forfeiture or punishment may be imposed as if the said Order had not
been repealed.TC "
and any such investigation, legal proceeding or remedy may be instituted, continued or enforced
and any such penalty, forfeiture or punishment may be imposed as if the said Order had not been
repealed."
446
SCHEDULE I
[See paragraph 6 (1) (a) and 6 (5)]
Name and address of agencies for Evaluation/Rating a Parallel Marketeer
Name Address
1. CRISIL Nirlon House, 2nd Floor, 254-B,
(The Credit Rating Information Annie Besant Road, Worli, Bombay-
Services of India Ltd.) 400025
2. CARE RBC, Mahindra Towers, 5th Floor,
(Credit Analysis and Research Road No. 13, Worli, Bombay-400018
Limited)
3. MDRA Secular House, 9/1, Institutional
(Marketing and Development Area, Opp. JNU, New Delhi-67
Research Associates)
4. ICRA Kailash Building, 4th Floor,
(Investment Information Credit Rating 26 Kasturba Gandhi Marg, New Delhi-
Agency of India Ltd.) 1
447
SCHEDULE II
[See paragraph 6(1)(b)]
Rating Certificate for the Parallel Marketeer
Date of Issue.............................
Name of Firm/Company:
Registered Office Address:
Name of Promoter/Chairman/Managing Director:
Activities:
Particular of Bankers:
Overall Rating.................................
Rating Scale
Good
Satisfactory
Low Risk
High Risk
Signature and Seal of the Rating Agency
448
SCHEDULE III
[See paragraph 6(5)]
Proforma of information to be submitted by the Parallel Marketeer for
Evaluation / Rating by the Rating Agency
PARAMETERS DETAILS*
1. Market Standing of the Company:
A. Constitution of the firm
B. Registered Office
C. Location & Addresses of Existing
Business
D. Name of Promoters/Directors/Partners
E. Background and full antecedents of
promoters/directors/partners
F. Networth of Promoters/Directors/Partners
G. Current Activity
H. Details of existing operations of the
Parallel Marketeer and/or his group of
companies
I. Audited A/cs for three years of the promoter firm and group concerns with
details of promoters constitution
J. Working Capital requirement for new Business pertaining to Parallel Marketing
with resume of proposed scheme
K. Implementation record of typical projects already undertaken, in terms of
cost, time, nature of projects and technology involved
L. Business plans and projected cash flows
M. Sourcing of funds for existing and proposed Business
N. Performance of Parallel Marketeer in his other group companies for last
three years with income-tax clearance certificate
2. Marketing Plans for auto LPG:
2.1 Infrastructure for auto LPG
Sourcing/Handling:
A. Import Locations identified
B. Proposed size of import parcels
C. Status of approvals (ports/statutory/State Government/Chief
Controller ofExplosives/Environment/Milestone
achieved with squared network-local authorities)
D. Status of Progress
E. Details of Technological tie ups, if any
F. Business proposals/Project Feasibility report, Financial Details and Financial
risk analysis
2.2 Commercial arrangements and/or consortium for LPG/auto LPG (if own facilities are
not planned):
449
A. Any tie up arrangement finalized with importer
B. The supporting agreements/documents for such tie up
C. The quantum of product to be imported with minimum guarantee
D. Details of Storage and Handling of product at the impor location/tie up
agreement
E. Fall back arrangement to meet the shortfall in case the tie up arrangement
does not materialize
3. Storage and Distribution arrangement for auto LPG planned:
A. Details of Storage facilities for auto LPG with their capacities
B. Status of progress on items mentioned above
C. Plant and Equipment/Technological details
D. Details of manpower and the arrangement to handle the product
E. Details of designs and standards to be followed for construction and operation of
these facilities
F. Status of approvals for the facilities
4. Arrangements planned to reach the product to consumption Centres/Markets:
A. Details of distributor network planned/already appointed
B. Details of the basis for dealers appointment
C. Details of facilities planned and or existing for storage and distribution, showroom/sales
room/office along with status of approvals
5. Product Familiarity, Training and Provision for Safety:
A. Operational knowledge of product (Liquefied Petroleum Gas) and its handling
B. The capability and preparedness to meet the safety requirement in Liquefied Petroleum Gas,
its transportation and accident relief during transportation
C. Plans for training the staff and the consumer on safe handling of equipment/product
D. Recruitment policy and standards for the staff
E. Familiarity with Gas Control Orders, Explosives Rules and applicable local acts
F. Details of arrangement for handling the emergencies
G. System for handling/redressal of customer complaint(s)
450
6. Marketing Discipline and Guidelines proposed to be adopted:
A. System to monitor and control diversion of auto LPG
7. Organisation in place/proposed for the parallel marketing of auto LPG:
A. Details of Organizational Structure
B. Level of managerial involvement of the promoter
C. Source of financing the parallel marketing of auto LPG including the
infrastructure
8. Financial commitment.
Date.................................
Signature.................................
M/s........................................
(Parallel Marketeer)
Address.................................
451
SCHEDULE IV
[See clauses 6 (1) (b)]TC "[See clauses 6 (1) (b)]"
Forwarding letter for the Certificate of Rating
To whomsoever it may concern
This is to certify that we have made an evaluation of
M/s............................................................ for the purpose of issuing certificate and a rating to
them in accordance with the provisions of the Liquefied Petroleum Gas (Regulation of Use in
Motor Vehicles), Order, 2001.
We have obtained all the information and explanations which to the best of our
knowledge and belief were necessary for the purpose of issuing this certificate. The certificate
issued by us is as a result of our examination of the documents, records and assessment of the
information obtained by us and the evaluation of capability, infrastructure network and readiness
to carry out professed business, deliver goods and services promised by the parallel marketeer.
We are satisfied that the information and particulars received and collected by us are sufficient
enough to enable us to evaluate M/s................................................... ** .............................
providing the rating as specified.
M/s..................................... **..........................are awarded .......................rating.
Salient facts about M/s................................. ** ...........................................are as follows:—
1. Total investment planned.
2. Total investment made up-to-date.
3. Promoter’s equity.
4. Proposed/likely date of commissioning.
** Name of the parallel marketeer to be indicated.
(Signature and seal of the Rating Agency)
452
THE MOTOR VEHICLES (NEW HIGH SECURITY
REGISTRATION PLATES) ORDER, 20011
[22nd August, 2001]
Whereas the Central Government is of the opinion that it is necessary and expedient in
the public interest to notify certain standards in respect of the new system of high security
registration plates for motor vehicles and the process used by a manufacturer or vendor for
manufacturing or supplying such plates with reference to the amendments made in the Central
Motor Vehicles Rules, 1989 by the Central Motor Vehicles (Ist Amendment) Rules, 2001, it,
therefore, in exercise of the powers conferred by the sub-section (3) of section 109 of the Motor
Vehicles Act, 1988 (59 of 1988) makes the following order to specify such standards, namely:—
ORDER
1. This Order may be called as the Motor Vehicles (New High Security Registration Plates)
Order, 2001.
2. It shall come into force on the 28th day of September, 2001 in case of new registered vehicles
from that date and in case of already registered vehicles, two years from the date of publication
of this Order in the Official Gazette.
3. Application.—This Order shall apply to motor vehicles as defined in clause (28) of section 2
of the Motor Vehicles Act, 1988 (59 of 1988).
4. A manufacturer or supplier of new high security registration plates shall comply with the
following specifications, namely:—
(i) The manufacturer or supplier shall have a certificate from the Central Road Research
Institute, New Delhi or any one of the testing agencies authorised by the Central
Government under rule 126 of the Central Motor Vehicles Rules, 1989.
(ii) The registration plate shall conform to the specifications spelt out in rule 50 of the
Central Motor Vehicles Rules, 1989; and shall conform to 2[DIN 74069—1975 and ISO
7591—1982, as amended from time to time till such time as the corresponding BIS
specifications are notified]. The Registration Plate has to be guaranteed for imperishable
nature for a minimum of five years.
3[(iia) The size of the registration plate for different categories of vehicles shall be in
accordance with clause (vi) to sub-rule (1) of rule 50 of the Central Motor Vehicles
________________________________
1. Vide S.O. 814(E), dated 22nd August 2001, published in the Gazette of India, Extra., Pt. II, Sec. 3(ii)
dated 22nd August, 2001.
2. Subs. by S.O. 1041(E), dated 16th October, 2001, for the letters, figures and words,”DIN 1745/ DIN
1783 or ISO 7591, as updated from time to time” (w.e.f. 16-10-2001).
3. Ins. by S.O. 1041(E), dated 16th October, 2001 (w.e.f. 16-10-2001).
453
Rules,1989. However, in case of motorcycles, the size of the plate may be used 285 x 45
mm.]
(iii) The background colour of the letters in the High Security Registration Plates shall be the
same as per the colour scheme prescribed in the Notification of the Government of India
in the Ministry of Road Transport and Highways No. G.S.R. 221(E) dated 28.3.2001
namely in black colour on yellow background in case of transport vehicles and in black
colour on white background in other cases. The letters of registration mark shall be in
English and the figures shall be in Arabic numerals, and the letters and numerals shall be
embossed and hot stamped.
1[(iv) To protect against counterfeiting, a chromium-based hologram of the size 20 mm x 20
mm is to be applied by hot stamping on the top left-hand corner of the plate in both front
and rear plates. The hologram shall contain CHAKRA in blue colour as given in the
Annexure annexed to this Order.]
(v) The permanent identification number of minimum 7 digits is to be laser branded into the
reflective sheeting on the bottom left-hand side of the registration plate with the numeral
size being 2.5 mm.
2[Provided that the permanent consecutive identification number in Arabic numbers shall
be preceded by two alphabets representing the name of the vendor or the manufacturer or the
supplier, as the case may be, for whom the type approval certificate is issued by the test
agencies:
Provided further that the test agencies specified in column (2) of the Table below shall
use the alphabets specified in column (3) of the said Table as under:
TABLE
Sl. No. Name of Test Agency Alphabets
(1) (2) (3)
1. Automotive Research Association of India, Pune A to H
2. Central Road Research Institute, New Delhi I to P
3. Vehicles Research Development Establishment, Ahmednagar Q to S
Provided also that the height of the digits shall be 5mm for the front and rear registration
plates and shall be 2.5 mm for the third registration plate, which shall be in the form of a sticker.]
(vi) The hot stamping film to be applied on the letters/numerals of the licence number shall
bear the inscription “INDIA”. 3[The letters ”INDIA” shall be in blue colour with the font
size of 10 (Ten) in Type Arial Bold script at 45 degrees inclination with sequential lines
being the mirror image of the other.]
__________________________________
1. Subs. by S.O. 1041(E), dated 16th October, 2001 (w.e.f. 16-10-2001).
2. Ins. by S.O. 1041(E), dated 16th October, 2001 (w.e.f. 16-10-2001).
3. Added by S.O. 1041(E), dated 16th October, 2001 (w.e.f. 16-10-2001).
454
(vii) The third registration plate in the form of a self destructive type chromium based
hologram sticker shall be of the size of 100 mm x 60 mm is to be affixed on the inner side
of left hand corner of windshield of the vehicle. The details on the sticker shall be (i)
name of registering authority, (ii) registration number of the vehicle, (iii) laser branded
permanent identification number, (v) engine number, and (v) chassis number of the
vehicle. On the bottom of the right corner of the sticker, the chromium based hologram
shall be applied but of a smaller size of 10 mm x10 mm. In the said sticker the
registration number of the vehicle shall be in the centre with a letter size of 10 mm in
height. The name of registering authority would be on top part of sticker in letter size of 5
mm, while, laser branded permanent identification number, then engine number followed
by chassis number shall come in the bottom left side of the sticker with numeral size
being 2.5 mm in the each case. A depiction of the sticker is given in the sketch as
specified in the Annexure annexed to this Order. 1[The sticker should be essentially a
diffraction foil film with high reflective index and shall have the chromium based
hologram embedded.]
(viii) The registration plate fitted in the rear of the vehicle shall be fastened with non-
removable/non-reusable snap lock system. For that sake of better security, at least two
such snap locks shall be fitted.
(ix) No high security plate shall be affixed outside the premises of the registering authority.
(x) The manufacturer or the vendor selected by the State Transport Department for supply of
such registration plates may be for the State as a whole or for any region of the State.
2[(xa) The State Government or Union Territory Administration shall ensure that any person who
has been,—
(a) convicted of a cognizable offence by any court of law with imprisonment for a term
exceeding one year; or
(b) imposed a penalty of rupees one crore or more for violation of the provisions of the
Foreign Exchange Regulation Act, 1973 (46 of 1973) (since repealed) or the Foreign
Exchange Management Act, 1999 (42 of 1999); or
(c) detained under the National Security Act, 1980 (65 of 1980) or the Narcotic Drugs
and Psychotropic Substances Act, 1985 (61 of 1985); or
(d) adjudged guilty by the Stock Exchange Board of India or any other such Financial
Regulatory Boards or Tribunals or Agencies; or
(e) found to be associated in any manner with an organized crime syndicate or its
associate or with any Association declared unlawful under the Unlawful Activities
(Prevention) Act, 1967 (37 of 1967) or any other law for the time being in force; or
___________________________
1. Added by S.O. 1041(E), dated 16th October, 2001 (w.e.f. 16-10-2001).
2. Ins. by S.O. 833(E), dated 12th June, 2006 (w.e.f. 12-6-2006).
455
(f) found to be connected with activities prejudicial to the National Security, is not
considered for selection as manufacturer or vendor for supply of High Security
Registration Plates.
(xb) The person or firm selected for any State or any region of the State shall not change the
ownership of the firm without prior permission of the State Government or Union
Territory Administration.
(xc) The State Government or Union Territory Administration shall take necessary action to
ensure compliance with the provisions of clause (xa), as so inserted, and complete the
implementation of rule 50 of the Central Motor Vehicles Rules, 1989 on or before the
31st day of October, 2006 for the newly registered vehicles and within a period of two
years thereafter for already registered vehicles:
Provided that before cancelling the selection of or disqualifying a manufacturer or
vendor, the State Government or Union Territory Administration shall give such manufacturer or
vendor, as the case may be, a reasonable opportunity to represent against such action and
communicate in writing the reasons for such cancellation or
disqualification.]
(xi) The registration plate will be supplied to the motor vehicle owners by the vendor against
the authorization by the Road Transport Officer or any officer designated for the purpose
by the State Transport Department.
(xii) The replacement for any existing registration plate may be made by the concerned
transport authority only after ensuring that the old plate has been surrendered and
destroyed.
(xiii) A proper record of the registration plates issued by the manufacturer or the vendor,
authorised by the State Government, should be maintained on a daily basis and got tallied
periodically with the records of the Transport Office.
(xiv) Periodic audit shall be carried out by concerned testing agency to ensure compliance of
the requirements of the high security registration plate.
456
________________________________
1. The hologram subs. by S.O. 1041(E), dated 16th October, 2001 (w.e.f. 16-10-2001).
457
SPECIFICATION OF PARTS, COMPONENTS OR ASSEMBLIES AND
RELEVANT STANDARDS FOR MANUFACTURE OF VEHICLES1
TABLE
Sl.
No.
Parts/Components/Assemblies Standards Date of Commencement/
validity
(1) (2) (3) (4)
2[1. Automobile lamps used in motor
vehicles including construction
equipment vehicles for the following
applications:
AIS-034/2004 1st April, 2005
(For 2 and 3 wheelers)
1st October, 2005
(For 4 wheelers)]
(i) Head Lights Main and Dip
(ii) Parking Light
(iii) Direction Indicator Lamp
(iv) Tail Lamp
(v) Reversing Lamp
(vi) Stop Lamp
(vii) Rear Registration Mark
Illuminating Lamp
(viii) Top Light
2. Hydraulic Brake Hose wherever used
in motor vehicles.
IS: 7079: 1995 as
amended from
time to time
Date of publication of this
notification.
3. Hydraulic Brake Fluid wherever used
in the motor vehicle.
IS: 8654: 1986 as
amended from
time to time
Date of publication of this
notification.
4. ‘T’ Signs, wherever used on Trailers. IS: 9942: 1981 as
amended from
time to time
Date of publication of this
notification.
5. The steering impact requirement. IS: 11939: 1996 for
the vehicles specified
therein, as amended
from time to time
Date of publication of this
notification.
6. Side door impact for all passenger
cars.
IS: 12009: 1995 as
amended from
time to time
Date of publication of this
notification.
7. (a) Non-plastic fuel tanks of motor
vehicles having more than three wheels;
(b) Plastic fuel tanks of motor vehicles
having more than three wheels.
IS: 12056: 1987 as
amended from time to
time AIS-033/2001
Date of publication of this
notification.
Date of publication of this
notification.
______________________________
1. Vide S.O. 1365(E), dated 13th December, 2004.
2. Subs. by S.O. 451(E), dated 30th March, 2005.
458
8. Wheel rims fitted on all motor
vehicles.
IS: 9438: 1980 as
amended from
time to time or IS:
9436: 1980 as
amended from
time to time
Date of publication of
this notification.
9. Control Cables fitted on motor cycles
of engine capacity less than 50 cc.
Clause 4 of
IS: 10791: 1983
asamended
from time to time
Date of publication of
this notification.
10. Pneumatic coupling used for
connection of brake system between
the towing vehicle and the trailer,
wherever used.
IS: 10792: 1984
as
amended from
time to time
Date of publication of
this notification.
11. The external projection on all motor
vehicles other than three wheelers of
engine capacity less than 500 cc and
motor cycles.
IS: 13942: 1994
as
amended from
time to time
Date of publication of
this notification.
12. The retention and release of the
windows fitted on buses.
IS: 13944: 1994
as amended from
time to time
Date of publication of
this notification.
13. Wheel guards (mud-guards) used on
passenger cars.
IS: 13944: 1994
as amended from
time to time
Date of publication of
this notification.
14. Wheel nuts, wheel disc and hub caps
of passenger cars, light and heavy
commercial vehicles.
IS: 13941: 1994
as amended from
time to time
Date of publication of
this notification.
15. The accelerator control system fitted
on all motor vehicles other than three-
wheelers of engine capacity less than
500 cc, motor cycles and tractors.
IS: 14283: 1995
as amended from
time to time
Date of publication of
this notification.
16. The door locks and door retention
components fitted on cars and light
passenger and commercial vehicles.
IS: 14225: 1995
as amended from
time to time
Date of publication of
this notification.
17. The hood latch system fitted on
passenger cars and commercial
vehicles.
IS: 14226: 1995
as amended from
time to time
Date of publication of
this notification.
18. Tell-Tale systems and control on two-
wheeler and three-wheeler vehicles.
IS: 14413: 1996
as amended from
time to time
Date of publication of
this notification.
19. Tell Tale symbols and control on
motor vehicles other than 3 wheeled
vehicles with handle bar, 2 wheeled
vehicles and tractors.
Safety Standard
No. 12.1
Date of publication of
this notification.
459
1[20. Installation requirement for lighting
and light signalling devices for non-
transport and transport vehicles
having more than three wheels, and
their trailers and semi-trailers, subject
to the following;
AIS-008/2001 13th December, 2004.
(i) Installation requirement for vertical
orientation of dipped beam headlamp;
Clause 6.2.6.1 of
AIS-008/2001
1st October, 2005.
(ii) Performance requirement of the
lighting, light signalling and direction
indicator systems;
Safety Standard
No. 15.1
13th December, 2004
and valid upto 30th
September, 2005
AIS-012/2004 1st October, 2005.
(iii) Performance requirement of
lighting, light signalling and
direction indicator systems of
construction equipment vehicles'
except the requirement of self-
cancellation of turn signal indication,
Safety Standard
No. 15.1
13th December, 2004.
Exception: Compliance of Safety
Standard No. 15.1 shall not be
applicable to agricultural tractor and
other special purpose motor vehicles.
21. Electromagnetic radiation from all
motor vehicles.
AIS-004/1999 Date of publication of
this notification.
22. Towing devices used on motor
vehicles, trailers and transport tractors
from 2 tons to 35 tons gross mass.
Safety Standard
No. 33.1
Date of publication of
this notification.
23. The gradeability of every motor
vehicle.
AIS-003/1999 Date of publication of
this notification.
24. Installation requirements for lighting
and light signalling devices for two and
three wheelers, and their trailers and
semi-trailers.
AIS-009/2001 Date of publication of
this notification.
*25. (a) Fuel tank for two and three
wheelers except the requirement for
permeability test for plastic fuel tank.
IS: 14681: 1999
as
amended from
time to time
Date of publication of
this notification.
(b) Requirement for permeability test
for plastic fuel tank for two and three-
wheelers.
IS: 14681: 1999
as
amended from
time to time1
1st April, 2005.
1 Subs. by S.O. 451(E), dated 30th March, 2005.
460
*26. (a) The requirements for construction
and functional safety of battery
operated vehicles manufactured on and
after 1st April, 2005, except for
insulation resistance in terms of clause
3.2.3 of AIS-038/2003.
AIS-038/2003 1st April, 2005.
(b) For insulation resistance. Clause 3.2.3. of
AIS-038/2003
The date of
commencement is to
be notified.
*27. The measurement of electrical energy
consumption for battery operated
vehicles manufactured on and after 1st
April, 2005.
AIS-039 1st April, 2005.
*28. The method of measuring range for
battery operated vehicles manufactured
on and after 1st April, 2005.
AIS-040/2003 1st April, 2005.
*29. The measurement of net power and the
maximum thirty minute power and
speed for battery operated vehicles
manufactured on and after 1st April,
2005.
AIS-041/2003 1st April, 2005.
*30. The type approval of battery operated
vehicles manufactured on and after 1st
April, 2005 except for
AIS-049/2003 1st April, 2005.
(i) EMI test in the frequency range 9
kHz to 30 kHz, and
Clause 2 of Annex
D of AIS-049/ 2003
The date of
commencement is
to be notified.
(ii) Conducted emission for battery
operated vehicle.
Clause 3 of Annex
D of AIS-049/ 2003
The date of
commencement is to
be be notified.
*31. Tests for fuel consumption for the
vehicles manufactured on and after 1st
April, 2005,
(a) Two and three-wheelers and four-
wheeled vehicles with Gross Vehicle
Weight up to 3.5 tonnes, where the
emission tests are conducted on chassis
dynamometer;
(b) Constant speed fuel consumption
test for other four-wheeled vehicles.
Measurement on
the basis of
driving cycle used
for emission
testing as per the
carbon balance
method alongwith
emission testing.
IS: 11921: 1993
as amended from
time to time, at the
constant speeds:
1st April, 2005.
1st April, 2005.
461
Light motor
vehicles- 50 Km/h
Medium and
Heavy motor
Vehicles 40 km/h
and 60 km/h.
*32. The performance requirements for
lighting and light signalling devices for
two-wheelers, three-wheelers and their
trailers and semi-trailers manufactured
on and after 1st April, 2005.
AIS-010/2004 1st April, 2005.
*33. The spray suppression devices for
automotive vehicles manufactured on
and after 1st April, 2005.
AIS-013/2004 for
the vehicles
specified therein.
1st April, 2005.
*34. (a) The driver’s field of vision of motor
vehicles of M1 category manufactured
on and after 1st April, 2007 except in
case of model M1 category;
(b) In the case of new models of M1
category.
AIS-021/2004
AIS-021/2004
1st April, 2007.
1st April, 2006.
*35. (a) The survival space for the protection
of occupants, in a cab of a vehicle
manufactured on and after 1st April,
2008.
(b) In the case of such cab supplied by
the OE manufacturer.
AIS-029/2004 for
the vehicles
specified therein.
AIS-029/2004
1st April, 2008.
1st April, 2007.
*36. The strength of superstructure of
passenger vehicles.
AIS-031/2004 for
the vehicles
specified therein.
1st April, 2007.
*37. The flammability requirements for the
automotive vehicles manufactured on
and after 1st October, 2005.
IS: 15061: 2002
as amended from
time to time
1st October, 2005.
*38. (a) The interior fittings on automotive
vehicles of M1 category manufactured
on and after 1st April, 2006.
(b) In the case of new models of M1
category.
IS: 15223: 2002
as amended from
time to time
IS: 15223: 2002
as amended from
time to time
1st April, 2006.
1st April, 2005.
*39. The requirements for the windscreen
wiping system for three wheelers
manufactured on and after 1st April,
2005.
AIS-045/2004 1st April, 2005.
462
*40. The interior noise level requirements
for the vehicles for transport vehicles of
M2, M3, N2 and N3 category
manufactured on and after 1st April,
2005.
AIS-020/2004 1st April, 2005.
* Fresh Type Approval/revalidation of existing Type Approval would be required for new items.
463
THE CENTRAL MOTOR VEHICLES (REGULATION OF BUS SERVICE BETWEEN
AMRITSAR AND LAHORE) RULES, 20061
WHEREAS, the Government of the Republic of India and the Government of the Islamic
Republic of Pakistan have entered into an Agreement on 21st day of December, 2005 for
operating passenger bus service between Amritsar and Lahore on the basis of mutual advantage
and reciprocity;
AND WHEREAS, the Central Government is empowered under sub-section (2) of section 139 of
the Motor Vehicles Act, 1988 (59 of 1988) to frame rules to give effect to such reciprocal
arrangements which inter alia authorises the Government to exempt such motor vehicles and
their drivers and conductors from the operation of all or any of the provisions of the said Act;
AND WHEREAS, to give effect to the said Agreement which came into force, on 21st December,
2005, the Central Government considers it necessary to dispense with the requirement of pre-
publication contained in sub-section (1) of section 212 of the said Act;
NOW, THEREFORE, in exercise of the powers conferred by sub-section (2) of section 139 of the
Motor Vehicles Act, 1988 (59 of 1988), the Central Government hereby makes the following
rules, namely:—
1. Short title and commencement.—(1) These rules may be called THE CENTRAL MOTOR
VEHICLES (REGULATION OF BUS SERVICE BETWEEN AMRITSAR AND LAHORE) RULES, 2006.
(2) These rules shall come into force on the date of their publication in the Official
Gazette.
2. Definitions.—In these rules, unless the context otherwise requires,—
(a) “Agreement” means the Agreement between the Government of the Republic of India
and the Islamic Republic of Pakistan for the regulation of bus service between Amritsar and
Lahore signed on 21st December, 2005;
(b) “authorisation fee” means the fee to be paid by the permit holder of one country to the
other country for obtaining authorisation;
(c) “bus crew” means driver, conductor and the liaison officer;
(d) “competent authority” means,—
in relation to—
(i) “permits”, an authority competent to issue such a permit authorised under the law of
the country concerned;
464
(ii) “driving license”, an authority competent to issue such a driving license authorised
under the law of the country concerned;2
(iii) “conductor’s license”, an authority competent to issue such a conductor’s license
authorised under the law of the country concerned;
(e) “country” means India or Pakistan, as the case may be;
(f) “form” means any of the form specified in the Schedule annexed to these rules;
(g) “Liaison Officer” means official included in the crew authorised to carry out
operational supervision of transport vehicle and to keep liaison between passengers and customs
and immigration authorities and between passengers and prescribed food outlets or restaurants;
(h) “passenger” means a person in possession of a valid ticket for travel from Amritsar to
Lahore or vice versa and a valid passport, visa and any other travel document which may be
mutually agreed to between the Parties to the Agreement;
(i) “PUC certificate” means Pollution Under Control Certificate issued by appropriate
authorities in Pakistan or India;
(j) “scheduled service routes” mean the routes along with the time schedule and other
related operational aspects specified in the Protocol to the Agreement for the regulation of bus
service between Amritsar and Lahore;
(k) “transport vehicle” means a motor vehicle (coach or bus) for the carriage of passengers
for hire or reward, between India and Pakistan, subject to such restrictions on the gross laden
weight, wheel base or seating capacity of vehicles as may be imposed under the law in either
country from time to time. .
3. Forms, contents and duration, etc., of the permit.—(1) A regular permit for transport
vehicle shall be in the form set out in Schedule I and shall be non-transferable.
(2) A regular permit for transport vehicle shall be valid for one year and renewable upto a
maximum period of five years on a yearly basis.
4. Eligibility conditions of a vehicle.—(1) A transport vehicle shall be so constructed and
maintained as to be at all times under the effective control of the person driving it.
(2) Driver of a transport vehicle referred to in sub-rule (1) shall have,—
(a) a valid registration certificate issued under the law of the country concerned;
(b) a valid certificate of fitness issued under the law of the country concerned;
(c) a valid insurance policy issued under the law of the country concerned;
1. Vide G.S.R. 68 (E), dated 16th February , 2006, published in the Gazette of India, Pt. II, Sec. 3(i),
dated 16th February, 2006
465
(d) a valid permit under the law of the country concerned;
(e) a passenger list with details of their nationality; and
(f) a valid PUC certificate under the law of the country concerned,
in respect of such vehicle and shall make all the said documents available for inspection by any
authority competent to inspect such vehicle.
5. Conditions for the driver and conductor.—(1) The person driving a transport vehicle
shall be in possession of a valid driving license issued by a competent authority to drive such a
vehicle and the driver’s badge.
(2) The conductor of a transport vehicle shall be in possession of a valid conductor’s
license issued by a competent authority.
(3) For any reason, a driver referred to in sub-rule (1) or a conductor referred to in sub-rule
(2), of a country is unable to perform his duties in the other country, a driver or a conductor in
possession of a valid license issued by the competent authority of such other country, may drive
or act as a conductor of the vehicle, as the case may be.
6. Distinguishing particulars to be exhibited on the transport vehicle.—In addition to the
registration number assigned to a transport vehicle operating under the Agreement by the
competent authority, the following particulars shall be painted in English and in official language
of the respective country each letter being not less than two inches (five centimetres) high and
two inches (five centimetres) wide, legibly painted on a plain surface or a plate or plates affixed
to the vehicles, namely:—
(i) Amritsar—Lahore—Amritsar (on front side and back side of such transport vehicle in a
conspicuous place).
(ii) Name of the operator of the bus service (on both the sides of such transport vehicle).
7. Personal effects of bus crew.—The bus crew of a transport vehicle operating under the
Agreement may carry such personal effects, as may be necessary, having regard to the period of
their stay in the host country subject to conditions specified in the customs laws of both
countries.
8. Insurance of the vehicle.—No transport vehicle which does not have a policy of insurance
which covers comprehensive or third party risks, arising out of the use of transport vehicle and
which complies with the requirements of the law of the country concerned shall operate under
these rules.
9. Conditions for transport of passengers.—No transport vehicle registered in Pakistan shall
be engaged in the transport of passengers from any point of India to any other point in India, and
similarly no transport vehicle registered in India shall be engaged in the transport of passengers
from any point in Pakistan to any other point in Pakistan.
466
SCHEDULE
(See Rule 3)
FORM OF PERMIT TO PLY TRANSPORT VEHICLES ON INDIA (AMRITSAR) -
PAKISTAN (LAHORE)
REGULAR PERMIT*
(Strike out whichever is not applicable)
Government of India /Government of Pakistan
Permit to ply transport vehicles between India (Amritsar)- Pakistan ( Lahore).
(a) Name, address and nationality of the operator of motor vehicle.
(b) Registration Number of the vehicle.
(c) Nature of transport operators: Point to point Amritsar- Lahore- Arnritsar.
(d) Capacity of the vehicle;
(i) Seating capacity
(ii) Laden Weight
(e) Particulars of insurance policy.
((I Particulars of Certificate of fitness.
(g) The starting and terminal points in each country.
(h) The route or routes to be followed by the scheduled passenger service vehicle
This permit is valid from ....................... to ...................... and is not transferable.
Signature, Designation and Seal of the
competent authority of the Government of
India
Signature, Designation and Seal of the
competent authority of the Government of
Pakistan
This permit is hereby renewed upto the day of ......:........................... .
Signature, Designation and Seal of the
competent authority of the Government of
India
Signature, Designation and Seal of the
competent authority of the Government of
Pakistan
*means a permit issued by competent authority of one country and countersigned by the
competent authority of the other country, authorizing the transport vehicle to ply on the
scheduled service route, as specified in such permit, and includes regular permit for
passenger transport.
Note: Registration papers and other documents such as insurance certificate, fitness
certificate, etc., shall be carried on the vehicle(s) and made available for inspection on
demand by the competent authority or any officer duly authorized by the authority.
467
THE CENTRAL MOTOR VEHICLES (REGULATION OF BUS SERVICE BETWEEN
AMRITSAR AND NANKANA SAHIB) RULES, 20061
In exercise of the powers conferred by sub-section (2) of section 139 of the Motor Vehicles
Act, 1988 (59 of 1988), the Central Government hereby makes the following rules, namely:—
1. Short title and commencement.—(1) These rules may be called THE CENTRAL MOTOR
VEHICLES (REGULATION OF BUS SERVICE BETWEEN AMRITSAR AND NANKANA SAHIB) RULES,
2006.
(2) They shall come into force on the date of their publication in the Official Gazette.
2. Definitions.—In these rules3, unless the context otherwise requires,—
(a) “Agreement” means the agreement between the Government of the Republic of India
and the Islamic Republic of Pakistan for the regulation of bus service between Amritsar and
Nankana Sahib signed on 21st December, 2005;
(b) “Authorisation fee” means the fee to be paid by the permit holder of one country to the
other country for obtaining authorisation;
(c) “Bus crew” means driver, conductor and the liaison officer;
(d) “Competent authority” means, in relation to—
(i) “permits”, an authority competent to issue such a permit authorised under the law of
the country concerned;
(ii) “driving license”, an authority competent to issue such a driving license authorised
under the law of the country concerned;
(iii) “conductor’s license”, an authority component to issue such a conductor’s license
authorised under the law of the country concerned;
(e) “country” means India or Pakistan, as the case may be;
(f) “form” means a form specified in the Schedule annexed to these rules;
(g) “Liaison Officer” means official included in the crew authorised to carry out
operational supervision of transport vehicle and to keep liaison between passengers and customs
and immigration authorities and between passengers and prescribed food outlets/restaurants;
(h) “passenger” means a person in possession of a valid ticket for travel from Amritsar to
Nankana Sahib or vice versa and a valid passport, visa and any other travel document which may
be mutually agreed to between the Parties to the Agreement;
1. Vide G.S.R. 68 (E), dated 16th February , 2006, published in the Gazette of India, Pt. II, Sec. 3(i),
dated 16th February, 2006
468
(i) “PUC certificate” means Pollution Under Control Certificate issued by the appropriate
authorities in Pakistan or India;
(j) “scheduled service routes” mean the routes along with the time schedule and other
related operational aspects specified in the Protocol to the Agreement for the regulation of bus
service between Amritsar and Nankana Sahib;
(k) “transport vehicle” means a motor vehicle (coach or bus) for the carriage of passengers
for hire or reward, between India and Pakistan, subject to such restrictions on the gross laden
weight, wheel base or seating capacity etc., of vehicles as may be imposed under the law in
either country from time to time.
3. Forms, contents and duration, etc., of the permit.—(1) A regular permit for transport
vehicle shall be in the form set out in Schedule and shall be non-transferable:
(2) A regular permit for transport vehicle shall be valid for one year and renewable upto a
maximum period of five years on a yearly basis.
4. Eligibility conditions of a vehicle.—(1) A transport vehicle shall be so constructed and
maintained as to be at all times under the effective control of the person driving it.
(2) Driver of a transport vehicle referred to in sub-rule (1) shall have,—
(a) a valid registration certificate issued under the law of the country concerned;
(b) a valid certificate of fitness issued under the law of the country concerned;
(c) a valid insurance policy issued under the law of the country concerned;
(d) a valid permit under the law of the country concerned;
(e) a passenger list with details of their nationality; and
(f) a valid Pollution Under Control Certificate under the law of the country concerned,
in respect of such vehicle and shall make all the said documents available for inspection by any
authority competent to inspect such vehicle.
5. Conditions for the driver and conductor.—(1) The person driving a transport vehicle
shall be in possession of a valid driving license issued by a competent authority to drive such a
vehicle and the driver’s badge.
(2) The conductor of a transport vehicle shall be in possession of a valid conductor’s
license issued by a competent authority.
(3) For any reason, a driver referred to in sub-rule (1) or a conductor referred to if sub-rule
(2), of a country is unable to perform his duties in the other country, a driver or a conductor in
possession of a valid license issued by the competent authority of such other country, may drive
or act as a conductor of the vehicle, as the case may be.
469
6. Distinguishing particulars to be exhibited on the transport vehicle.—In addition to the
registration number assigned to a transport vehicle operating under the agreement by the
competent authority, the following particulars shall be painted in English and in official language
of the respective country each letter being not less than two inches (five centimetres) high and
two inches (five centimetres) wide, legibly painted on a plain surface or a plate or plates affixed
to the vehicles, namely:—
(i) Amritsar—Nankana Sahib—Amritsar (on front side and back side of such transport
vehicle in a conspicuous place).
(ii) Name of the operator of the bus service (on both the sides of such transport vehicle).
7. Personal effects of bus crew.—The bus crew of a transport vehicle operating under the
Agreement may carry such personal effects, as may be necessary, having regard to the period of
their stay in the host country subject to conditions specified in the customs laws of both
countries.
8. Insurance of the vehicle.—No transport vehicle which does not have a policy of insurance
which covers comprehensive or third party risks, arising out of the use of transport vehicle and
which complies with the requirements of the law of the country concerned shall operate under
these rules.
9. Conditions for transport of passengers.—No transport vehicle registered in Pakistan shall
be engaged in the transport of passengers from any point of India to any other point in India, and
similarly no transport vehicle registered in India shall be engaged in the transport of passengers
from any point in Pakistan to any other point in Pakistan.
SCHEDULE
(See Rule 3)
FORM OF PERMIT TO PLY TRANSPORT VEHICLES ON INDIA (AMRITSAR) -
PAKISTAN (NANKANA SAHIB)
REGULAR PERMIT*
(Strike out whichever is not applicable)
Government of India /Government of Pakistan
Permit to ply transport vehicles between India (Amritsar)- Pakistan ( Nankana Sahib).
(f) Name, address and nationality of the operator of motor vehicle.
(g) Registration Number of the vehicle.
(h) Nature of transport operators: Point to point Amritsar- Nankana Sahib - Arnritsar.
(i) Capacity of the vehicle;
(i) Seating capacity
(ii) Laden Weight
(j) Particulars of insurance policy.
470
((I Particulars of Certificate of fitness.
(i) The starting and terminal points in each country.
(j) The route or routes to be followed by the scheduled passenger service vehicle
This permit is valid from ....................... to ...................... and is not transferable.
Signature, Designation and Seal of the
competent authority of the Government of
India
Signature, Designation and Seal of the
competent authority of the Government of
Pakistan
This permit is hereby renewed upto the day of ......:........................... .
Signature, Designation and Seal of the
competent authority of the Government of
India
Signature, Designation and Seal of the
competent authority of the Government of
Pakistan
*means a permit issued by competent authority of one country and countersigned by the
competent authority of the other country, authorizing the transport vehicle to ply on the
scheduled service route, as specified in such permit, and includes regular permit for
passenger transport.
Note: Registration papers and other documents such as insurance certificate, fitness
certificate, etc., shall be carried on the vehicle(s) and made available for inspection on
demand by the competent authority or any officer duly authorized by the authority.
471
Chapter I
Preliminary
1. Short title and commencement
(1) These rules may be called the Central Motor Vehicle Rules, 1989.
2. Definitions
1[(w) “National Capital Region “ shall have the meaning assigned to it in clause (f) of section 2 of the National Capital Region Planning Board Act, 1985 ( 2 of 1985.]
Chapter II
Licensing of Drivers of Motor Vehicles
3. General
4. Evidence as to the correctness of address and age
5. Medical certificate
6. Exemption from production of medical certificate
7. Affixing of photograph to medical certificate
3[8. Minimum educational qualification for driving transport vehicles
9. Educational qualifications for drivers of goods carriages carrying dangerous or hazardous goods
10. Application for learner’s licence
11. Preliminary test
13. Form of learner’s licence
14. Application for a driving licence
15. Driving test
16. Form of driving licence
17. Addition to driving licence
18. Renewal of driving licence
1[(3) Where the licensing authority renewing the driving licence is not the licensing authority who issued the driving licence the fact of the renewal shall be intimated to the licensing authority who issued the driving licence:
Provided that in case the application is for issuance of a duplicate driving licence which has been lost, torn or mutilated such that the identification or authenticity of the document cannot be reasonably established, the licensing authority receivin...
Provided also that if such confirmation is not received within 60 days, duplicate licence shall be issued, without waiting for the confirmation.]
19. Refund of fee
20. Driving licence to drive motor vehicle belonging to the Defence Department
21. Powers of licensing authority to disqualify
22. Endorsement by Courts
23. State Register of driving licences
24. Driving schools and establishments
25. Duration of a licence and renewal thereof.
26. Issue of duplicate licence
27. General conditions to be observed by the holder of a licence
28. Power of the licensing authority to suspend or revoke licence
29. Appeal
30. Procedure for appeal
31. Syllabus for imparting instructions in driving of motor vehicles
31 A. Temporary licence
32. Fees
Chapter III – Registration of Motor Vehicles
Section 33. Condition for exemption from registration
34. Trade certificate
35. Grant or renewal of trade certificate
36. Refund
37. Period of validity
38. Issue of duplicate certificate
39. Use of trade registration mark and number
40. Restrictions on use of trade certificate or trade registration mark and number
41. Purposes for which motor vehicle with trade certificate may be used
42. Delivery of vehicle subject to registration
43. Register of trade certificate
44. Suspension or cancellation of trade certificate
45. Appeal
46. Procedure for appeal
47. Application for registration of motor vehicles
48. Issue of certificate of registration
49. Registration records to be kept by the registering authority
50. Form and manner of display of registration marks on the motor vehicles
51. Size of letters and numerals of the registration mark
52. Renewal of certificate of registration
53. Issue of duplicate certificate of registration
54. Assignment of new registration mark
55. Transfer of ownership
56. Transfer of ownership on death of owner of the vehicle
57. Transfer of ownership of vehicle purchased in public auction
58. No objection certificate
59. Change in residence
60. Endorsement of hire-purchase agreements, etc.
61. Termination of hire-purchase agreements, etc.
Section 62. Validity of certificate of fitness
63. Regulation and control of authorised testing stations.
64. Duration of letter of authority
65. General conditions to be observed by the holder of letter of authority
66. Issue of duplicate letter of authority
67. Supervision of authorised testing stations
68. Power of registering authority or Regional Transport Authority to call for information
69. Power of registering authority to suspend or cancel the letter of authority or forfeit security deposit
70. Appeal
71. Procedure for appeal
72. Voluntary surrender of letter of authority
73. Tax clearance certificate to be submitted to the testing station
74. Assignment of registration marks to the vehicles belonging to the Central Government used for defence purposes-
The authority referred to in sub-section (1) of section 60 shall assign registration marks to the vehicles belonging to the Central Government and used for defence purposes in the following manner, namely:—
75. State register of motor vehicles
76. Registration of vehicles of diplomatic and consular officers
76 A. Application of rules 76 to 80 to organisations notified under the United Nations (Privileges and Immunities) Act, 1947
1[76 B. Registration of vehicles of home-based non-diplomatic officials of diplomatic missions or consular posts
77. Exhibition of registration mark
78. Assignment of new registration mark on removal of vehicle to another State
79. Suspension and cancellation of registration of vehicle registered under rule 76
80. Transfer or disposal of motor vehicle registered under rule 76
81. Fees
Chapter IV
Control of Transport Vehicles
Section 82. Tourist permits
83. Authorization fee
84. Right of operation
85. Additional conditions of tourist permit
85 A. The following shall be the additional conditions of every tourist permit in respect of motor cabs
86. Application for national permit
87. Form, contents and duration of authorisation
88. Age of motor vehicle for the purpose of national permit
89. *****
90. Additional conditions for national permit
Chapter V
Construction, Equipment and Maintenance of Motor Vehicles
Section 91. Definitions
92. General
93. Overall dimension of motor vehicles
93 A. Overall dimension for agricultural tractors
94. Condition of tyres
95. Size and ply rating of tyres
95 A. Size and ply rating of tyres for agricultural tractor
95 B. Size and ply rating of tyres for power tillers
96. Brakes
96 A. Brakes for construction equipment vehicle
96 B. High Speed Braking Requirements
96 C. Brakes for agricultural tractor
96 D. Braking requirements for power tillers
97. Brakes for trailers
98. Steering gears
98A. 2Steering gears for construction equipment vehicles
3[98B. Steering Gears for agricultural tractors
1[98C. Steering gear for power tillers
99. Forward and backward motion
100. Safety glass
101. Windscreen wiper
3[102. Signalling devices, direction indicators and stop lights
103. Position of the indicator
104. Fitment of reflectors
2[104A. Fitment of reflectors on construction equipment vehicles
1[104B. Fitment of reflectors for agricultural tractors
104C. Fitment of reflectors on power tillers
105. Lamps
106. Deflection of lights
6[107. Top lights
107A. 2[Implement lights for construction equipment vehicle
3[108. Use of red, white or blue light
1[108A. Use of red or white light on construction equipment vehicles
1[109. Parking light
110. Lamps on three-wheelers
111. Prohibition of spot lights, etc.
112. Exhaust gases
113. Location of exhaust pipes
114. Exhaust pipes of public service vehicles
115. Emission of smoke, vapour, etc. from motor vehicles
2[115A. 3[Emission of smoke and vapour from agricultural tractors, power tillers and construction equipment vehicles driven by diesel engines.
(1) Every 4[agricultural tractor and construction equipment vehicle] manufactured on and from the date of commencement of this rule shall be maintained by its owner in such condition and shall be so used that visible and gaseous pollutants emitted by ...
1[115B. Mass emission standards for Compressed Natural Gas Driven Vehicles
2[115C. Mass emission standards for Liquefied Petroleum Gas (hereinafter in this rule referred to as LPG), driven vehicles
116. Test for smoke emission level and carbon monoxide level for motor vehicles
117. Speedometer
118. Speed governor
119. Horns
120. Silencers
121. Painting of motor vehicles
Previous and next
← Rule 108AUse of red or white light on construction equipment vehicles No construction equipment vehicle shall show a red light to the front or light other than red to the rear: Provided that the provision of this rule shall not apply toRule 122 →5[Embossment of the chassis number and engine number or in the case of battery operated vehicles, motor number and month of manufacture
Questions people ask
Is rule 110 of THE CENTRAL MOTOR VEHICLES RULES, 1989 still in force?
No repeal of the CENTRAL MOTOR VEHICLES RULES, 1989 is recorded.