Rule 26, THE ENVIRONMENT (PROTECTION) RULES, 1986: Residual Sodium carbonate, mg/l, Max
THE ENVIRONMENT (PROTECTION) RULES, 1986 - Rule 26
Text of rule 26
Residual Sodium carbonate, mg/l, Max
26. Residual Sodium carbonate,
mg/l, Max.
- - 5.0 -
27. Cynide (as CN), mg/l, Max. 0.2 2.0 0.2 0.2
28. Chloride (asCl), mg/l, Max. 1000 1000 600 -
29. Fluoride (as F), mg/l, Max. 2.0 15 - 15
30. Dissolved Phosphates (as P)
mg/l, Max.
5.0 - - -
31. Sulphate (as SO4), mg/l, Max. 1000 1000 1000 -
32. Sulphide (as S), mg/l, Max. 2.0 - - 5.0
33. Pesticides Absent Absent Absent Absent
34. Phenolic compounds (as
C6H5OH) mg/l, Max.
1.0 5.0 - 5.0
35. Radioactive materials :
(a) Alpha emitters MC/ml.
Max.
10 – 7 10 – 7 10 – 8 10 – 7
(b) Beta emitters c/ml.
Max
10 – 6 10 – 6 10 – 7 10 – 6
Note : 1. All efforts should be made to remove colour and unpleasant odocur as far as
practicable.
2. The standards mentioned in this notification shall apply to all the effluents
discharged such as industrial mining and mineral processing activities municipal
sewage etc.
3.
1
[***…..]
1 Omitted by Rule 2 of the Environment (Protection) Fourth Amendment Rules, 1992 vide Notification GSR 797(E)
dated 01.01.1992, Gazette No. 396 dated 01.01.1992.
The Environment (Protection) Rules, 1986 535
1
[SCHEDULE III]
(See rule 3)
AMBIENT AIR QUALITY STANDARDS IN RESPECT OF NOISE
Area Code Category of Area Limits in dB(A) Leq.
Date Time Night Times
(A) Industrial Area 75 70
(B) Commercial Area 65 55
(C) Residential Area 55 45
(D) Silence Zone 50 40
Note :
1. Day time is reckoned in between 6 a.m. and 9 p.m.
2. Night time is reckoned in between 9 p.m. and 6 a.m.
3. Silence zone is defined as areas upto 100 meters around such premises as
hospitals, educational institutions and courts. The Silence zones are to be
declared by the Competent Authority.
Use of vehicular horns, loudspeakers and bursting of crackers shall be
banned in these zones.
4. Mixed categories of areas should be declared as one of the four above
mentioned categories by the Competent Authority and the corresponding
standards shall apply.
1
Schedule III inserted vide GSR 1063(E), dt. 26.12.89, published in the Gazette No. 643 dt. 26.12.89.
The Environment (Protection) Rules, 1986 536
1
[SCHEDULE IV]
(See rule 3)
STANDARDS FOR EMISSION OF SMOKE, VAPOUR ETC. FROM MOTOR VEHICLES :
(1) Every motor vehicles shall be manufactured and maintained in such condition
and shall be so driven that smoke, visible vapour, grit, sparks, ashes, cinders or
oily substance do not emit therefrom.
(2) On and from the 1
st
day of March, 1990, every motor vehicle in use shall comply
with the following standards :
(a) Idling CO (Carbon monoxide) emission limit for all four wheeled petrol
driven vehicles shall not exceed 3 per cent by volume;
(b) Idling CO emission limit for all two and three wheeled petrol driven
vehicles shall not exceed 4.5 per cent by volume;
(c) Smoke density for all diesel driven vehicles shall be as follows :
Method of Test Maximum smoke density
Light
absorption
coefficient m-
1
Bosch units Harridge units
(a) Full load at a speed of 60% to 70% of
maximum enginerated speed declared by
the manufacturer.
3.1
5.2
75
(b) Free acceleration 2.3 - 65
(3) On and from the 1
st
day of April, 1991 all petrol driven vehicles shall be so
manufactured that they comply with the mass emission standards as specified at
Annexure ‘I’. The breakdown of the operating cycle used for the test shall be as
specified at Annexure ‘II’ and the reference fuel for all such tests shall be as
specified in Annexure ‘III’ to this Schedule.
(4) On and from the 1
st
day of April, 1991, all diesel driven vehicles shall be so
manufactured that they comply with the mass emission standards based on
exhaust gas capacity as specified at Annexure ‘IV’ to this Schedule.
(5) On and from the 1
st
day of April, 1992, all diesel driven vehicles shall be so
manufactured that they comply with the following levels of emission under the
Indian driving cycle :-
1 Schedule IV inserted vide G.S.R. 54 (E) dt. 5.2.90 published in the Gazette No. 45 dt. 5.2.90.
The Environment (Protection) Rules, 1986 537
Mass of Carbon
Monoxide (CO)
Maximum, Grams per
KWH
Mass of Hydroxy carbons
(HC)
Maximum Grams per
KHW
Mass of Nitrogen Oxides
(NC)
Maximum Grams per
KWH
14 3.5 18
(6) Each motor vehicle manufactured on and after the dates specified in paragraphs
(2), (3), (4) and (5) shall be certified by the manufacturers to tbe conforming to
the standards specified in the said paragraphs and the manufacturers shall further
certify that the components liable to effect the emission of gaseous pollutants are
so designed, constructed and assembled as to enable the vehicle, in formal use,
despite the vibration to which it may be subjected, to comply with the provisions
of the said paragraphs.
(7) Test for smoke emission level and carbon monoxide level for motor vehicles –
(a) Any officer not below the ranks of a sub-inspector of police or an inspector
of motor vehicles, who has reason to believe that a motor vehicle is by
virtue of smoke emitted from it or other pollutants like carbon monoxide
emitted from it, is likely to cause environmental pollution, endangering the
health or safety of any other user of the road or the public, may direct the
driver or any person incharge of the vehicle to submit the vehicle for
undergoing a test to measure the standard of black smoke or the standard of
any of the other pollutants.
(b) The driver or any person incharge of the vehicle shall upon demand by any
officer referred to in sub-paragraph (a) submit the vehicle for testing for the
purpose of measuring the standard of smoke or the levels of other
pollutants or both.
(c) The measurement of standard of smoke shall be done with a smoke meter
of a type approved by the State Government and the measurement of other
pollutants like carbon monoxide shall be done with instruments of a type
approved by the State Government.
The Environment (Protection) Rules, 1986 538
ANNEXURE-I
(See paragraph 3)
MASS EMISSION STANDARDS FOR PETROL DRIVEN VEHICLES
1. Type Approval Tests :
Two and Three Wheeler Vehicles
Reference Mass, R (Kg) CO (g/km) HC(g/km)
1 2 3
R 150 12 8
150<R350 12 + 8 +
R>350 30 12
Two and Three Wheeler Vehicles
Reference Mass, R (Kg) CO (g/km) HC(g/km)
1 2 3
rw1020 14.3 2.0
1020<rw1250 16.5 2.1
1250<rw1470 18.8 2.1
1470<rw1700 20.7 2.3
1700<rw1930 22.9 2.5
1930<rw2150 24.9 2.7
rw>2150 27.1 2.9
18 (R-150)
200
4 (R-150)
200
The Environment (Protection) Rules, 1986 539
2. Conformity of Production tests :
Two and Three Wheeler vehicles :
Reference Mass, R (Kg) CO (g/km) HC(g/km)
1 2 3
R - 150 15 10
150<R350 15 + 10 +
R>350 40 15
Light Duty Vehicles :
Reference Mass, rw (Kg) CO (g/km) HC(g/km)
1 2 3
rw1020 17.3 2.7
1020<rw1250 19.7 2.7
1250<rw1470 22.5 2.8
1470<rw1700 24.9 3.0
1700<rw1930 27.6 3.3
1930<rw2150 29.9 3.5
rw>2150 32.6 3.7
For any of the pollutants referred to above of the three results obtained may exceed the
limit specified for the vehicles by not more than 10 per cent.
Explanation : Mass emission standards refers to the gm. of Pollutants emitted per Km.
run of the vehicle as determined by the chassis dynamometer test using the Indian
Driving Cycle.
25 (R-150)
200
5 (R-150)
200
The Environment (Protection) Rules, 1986 540
ANNEXURE-II
(See Paragraph 3)
BREAKDOWN OF THE OPERATING CYCLE, USED FOR THE TESTS
No. of Operation Acceleration
(m/acc
2
)
Speed
(Km/h)
Duration of
each
operation(s)
Cumulative
time(s)
1 2 3 4 5
01. Idling - - 16 16
02. Acceleration 0.65 0-14 6 22
03. Acceleration 0.56 14 – 22 4 26
04. Declaration
-0.63 22 – 13 4 30
05. Steady speed - 13 2 32
06. Acceleration 0.56 13 – 23 5 37
07. Acceleration
0.44 23 – 31 5 42
08. Deceleration -0.56 31 – 25 3 45
09. Steady Speed - 25 4 49
10. Deceleration -0.56 25 – 21 2 51
11. Acceleration 0.45 21 – 34 8 59
12. Acceleration 0.32 34 – 42 7 66
13. Deceleration 0.46 42 – 37 3 69
14. Steady speed - 37 7 76
15. Deceleration -0.42 37 – 34 2 78
16. Acceleration 0.32 34 – 42 7 85
17. Deceleration -0.46 42 – 27 9 94
18. Deceleration -0.52 27 – 14 7 101
19. Deceleration -0.56 14 – 00 7 108
The Environment (Protection) Rules, 1986 541
ANNEXURE-III
(See Paragraph 3)
REFERENCE FUEL FOR TYPE AND PRODUCTION CONFORMITY TESTS
S.
No.
Characteristics Requirements Method of
test (ref. of P:
or IS: 1448*) 87 Octane 93 Octane
1 2 3 4 5
1. Colour, visual Orange Red -
2. Copper-strip corrosion for 3 hours at 50
o
C Not worse than No. 1 P : 15 (1968)
3. Density at 15
o
C Not limited but to be
reported
P : 16 (1967)
4. Distillation : P: 18 (1967)
(a) Initial boiling point
* methods for test for petroleum and
its products.
Not limited but to be
reported
(b) Recovery up to 20
o
C percent by volume
min.
10
10
(c) Recovery upto 125
o
C 50 percent by
volume
50
50
(d) Recovery upto 130
o
C percent by volume 90 90
(e) Final boiling point, Max. 215
o
C 215
o
C
(f) Residue percent by volume Max. 2 2
5. Octane number (Research method) Max. 87 94 P : 27 (1960)
6. Oxidation stability in minutes, Min. 360 360 P : 28 (2966)
7. Residue on evaporation mg/100 ml. Max. 4.0 4.0 P : 29 (1960)
(Air-jat solvent
washed)
8. Sulphur, total, percent by weight Max. 0.25 0.20 P : 34 (1966)
9. Lead content (as Pb), g/l Max. 0.56 0.80 P : 37 (1967)
or P :38 (1967)
10 Reid Vapour pressure at 38 degree C. kg/Cm
3
Max.
0.70 0.70 P : 39 (1967)
The Environment (Protection) Rules, 1986 542
1
ANNEXURE-IV
(See Paragraph 4)
LIMIT VALUES OF EXHAUST GAS CAPACITY APPLICABLE
FOR DIESEL DRIVEN VEHICLES
THE ENGINE TESTS AT STEADY SPEED
Nominal Flow
G(l/s)
Absorption
Coefficient
(Km-1)
Nominal Flow
G(l/s)
Absorption
Coefficient
(K9-1)
42 2.00 120 1.20
45 1,91 125 1.17
50 1.82 130 1.15
55 1.75 135 1.31
60 1.68 140 1.11
65 1.61 145 1.09
70 1.56 150 1.07
75 1.50 155 1.05
80 1.46 160 1.04
85 1.41 165 1.02
90 1.38 170 1.01
95 1.34 175 1.00
100 1.31 180 0.99
105 1.27 185 0.97
110 1.25 190 0.96
115 1.22 195 0.95
> 200 0.93
1
Annexure IV inserted vide G.S.R. 54 (E) dt. 5.2.90 published in the Gazette no. 45 dt. 5.2.90.
The Environment (Protection) Rules, 1986 543
1
[SCHEDULE V]
(See rule 12)
S.
No.
Place at which the discharge of any
environmental Pollutant in excess
of prescribed standards occurs or is
apprehended to occur
Authorities or
agencies to be
intimated
Appointed under
1 2 3 4
1. Factories as defined under the
Factories Act, 1948
(a) owned by Central Government
and engaged in carrying out
the purposes of the Atomic
Energy Act;1962;
(i) The Atomic
Energy Regu-
latory Board
(AERB)
The Atomic Energy
Act, 1962
(ii) The Ministry of
Environment
and
Forests.
(b) Factories other than those
mentioned in paragraph (a)
(i) The Chief
Inspector of
Factories
The Factories Act,
1948
(ii) The Inspector of
Factories having
local jurisdiction.
- do -
(iii) The Ministry of
Environment and
Forests
2. Mine as defined under the Mines
and Minerals (Regulation and
Development) Act, 1957
(i) The Controller
General, Indian
Bureau of Mines
The Mines and Minerals
(Regulation &
Development)Act,1957
1
Schedule II relating to rule 12 re-numbered as Schedule V vide G.S.R. 422 (E) dated 19.05.1993, published in the
Gazette No. 174 dated 19.05.1993.
Entries relating to S.No. 2 corrected in terms of S.O. 64(E) published in Gazette No. 42 dt. 18.01.1988 and
corrigendum No. G.S.R. 434(E) dt. 07.04.1988 published in the Gazette No. 181 dt. 07.04.1988.
The Environment (Protection) Rules, 1986 544
(ii) Regional
Controller of
Mines having
local jurisdiction
- do -
(iii) The Ministry of
Environment and
Forests.
-
3. Port as defined under the Indian
Ports Act, 1908
(i) Conservator of
Ports
The Indian Ports
Act, 1908
(ii) The Ministry of
Environment &
Forests
-
4. Plantation as defined under the
Plantations Labour Act, 1951
(i) The Chief
Inspector of
Plantations.
The Plantations
Labour Act, 1951
(ii) The Inspector of
Plantation having
local jurisdiction.
- do -
(iii) The Ministry of
Environment &
Forests.
-
5. Motor Vehicles as defined under
the Motor Vehicles Act, 1939
(i) State Transport
Authority
The Motor Vehicles
Act, 1939
(ii) Regional
Transport
Authority having
regional
jurisdiction.
- do -
(iii) The Ministry of
Environment &
Forests.
-
6. Ship as defined under the Merchant
Shipping Act, 1958
(i) Director General
of Shipping
The Merchant
Shipping Act, 1958
(ii) Surveyor having
jurisdiction.
- do -
(iii) The Ministry of
Environment &
Forests.
-
The Environment (Protection) Rules, 1986 545
1[SCHEDULE – VI]
(See rule 3A)
GENERAL STANDARDS FOR DISCHARGE OF ENVIRONMENTAL
POLLUTANTS PART-A : EFFLUENTS
S.
No.
Parameter Standards
Inland
surface
water
Public
Sewers
Land for
irrigation
Marine coastal
areas
1 2 3
(a) (b) (c) (d)
1. Colour and odour See 6 of
Annexure-I
-- See 6 of
Annexure
-I
See 6 of
Annexure-I
2. Suspended solids
mg/l, Max.
100 600 200 (a) For process
waste water-
100
(b) For cooling
water effluent
10 percent
above total
suspended
matter of
influent.
3. Particulate size of
suspended solids
Shall pass 850
micron IS
Sieve
-- -- (a) Floatable
solids, max. 3
mm.
(b) Settleable
solids, max.
850 microns.
2
4. *** * -- *** --
5. pH Value 5.5 to 9.0 5.5 to 9.0 5.5 to 9.0 5.5 to 9.0
6. Temperature shall not
exceed 5
o
C
above the
receiving water
temperature
-- -- shall not exceed
5
o
C above the
receiving water
temperature
1
Schedule VI inserted by Rule 2(d) of the Environment (Protection) Second Amendment Rules, 1993 notified
vide G.S.R. 422(E) dated 19.05.1993, published in the Gazette No. 174 dated 19.05.1993.
2
Omitted by Rule 2(d)(i) of the Environment (Protection) Third Amendment Rules, 1993 vide Notification
No.G.S.R.801(E), dated 31.12.1993.
The Environment (Protection) Rules, 1986 546
S.
No.
Parameter Standards
Inland
surface
water
Public
Sewers
Land for
irrigation
Marine coastal
areas
1 2 3
(a) (b) (c) (d)
7. Oil and grease
mg/l Max.
10 20 10 20
8. Total residual
chlorin mg/l Max.
1.0 -- -- 1.0
9. Ammonical
nitrogen (as N),
mg/l Max.
50 50 -- 50
10. Total Kjeldahl
Nitrogen (as NH3)
mg/l, Max.
100 -- -- 100
11. Free ammonia (as
NH3) mg/l, Max.
5.0 -- -- 5.0
12. Biochemical
Oxygen demand
1
[3
days at 27
o
C] mg/l
max.
30 350 100 100
13. Chemical Oxygen
Demand, mg/l,
max.
250 -- -- 250
14. Arsenic (as As),
mg/l, max.
0.2 0.2 0.2 0.2
15. Mercury (as Hg),
mg/l, Max.
0.01 0.01 -- 0.01
16. Lead (as Pb) mg/l,
Max.
0.1 1.0 -- 2.0
17. Cadmium (as Cd)
mg/l, Max.
2.0 1.0 -- 2.0
18. Hexavalent
Chromium (as
Cr+6), mg/l max.
0.1 2.0 -- 1.0
1
Substituted by Rule2 of the Environment (Protection) Amendment Rules, 1996 notified by G.S.R.176, dated 2.4.1996
may be read as BOD (3 days at 27oC) wherever BOD 5 days 20oC occurred.
The Environment (Protection) Rules, 1986 547
S.
No.
Parameter Standards
Inland
surface
water
Public
Sewers
Land for
irrigation
Marine coastal
areas
1 2 3
(a) (b) (c) (d)
19. Total chromium (as
Cr.) mg/l, Max.
2.0 2.0 -- 2.0
20. Copper (as Cu)
mg/l, Max.
3.0 3.0 -- 3.0
21. Zinc (As Zn.) mg/l,
Max.
5.0 15 -- 15
22. Selenium (as Se.)
mg/l, Max.
0.05 0.05 -- 0.05
23. Nickel (as Ni) mg/l,
Max.
3.0 3.0 -- 5.0
1
1
24. * * * * * * *
1
25.
* * * * * * *
1
26.
* * * * * * *
27. Cyanide (as CN)
mg/l Max.
0.2 2.0 0.2 0.2
1
Previous and next
Questions people ask
Is rule 26 of THE ENVIRONMENT (PROTECTION) RULES, 1986 still in force?
No repeal of the ENVIRONMENT (PROTECTION) RULES, 1986 is recorded.