LawGrids logoLAWGRIDS.ORG

Rule 26, Environment (Protection) Rules, 1986: Residual Sodium carbonate, mg/l, Max

Environment (Protection) Rules, 1986 - Rule 26

Text of rule 26

Residual Sodium carbonate, mg/l, Max

26. Residual Sodium carbonate, mg/l, Max. - - 5.0 - 27. Cynide (as CN), mg/l, Max. 0.2 2.0 0.2 0.2 28. Chloride (asCl), mg/l, Max. 1000 1000 600 - 29. Fluoride (as F), mg/l, Max. 2.0 15 - 15 30. Dissolved Phosphates (as P) mg/l, Max. 5.0 - - - 31. Sulphate (as SO4), mg/l, Max. 1000 1000 1000 - 32. Sulphide (as S), mg/l, Max. 2.0 - - 5.0 33. Pesticides Absent Absent Absent Absent 34. Phenolic compounds (as C6H5OH) mg/l, Max. 1.0 5.0 - 5.0 35. Radioactive materials : (a) Alpha emitters MC/ml. Max. 10 – 7 10 – 7 10 – 8 10 – 7 (b) Beta emitters c/ml. Max 10 – 6 10 – 6 10 – 7 10 – 6 Note : 1. All efforts should be made to remove colour and unpleasant odocur as far as practicable. 2. The standards mentioned in this notification shall apply to all the effluents discharged such as industrial mining and mineral processing activities municipal sewage etc. 3. 1 [***…..] 1 Omitted by Rule 2 of the Environment (Protection) Fourth Amendment Rules, 1992 vide Notification GSR 797(E) dated 01.01.1992, Gazette No. 396 dated 01.01.1992. The Environment (Protection) Rules, 1986 535 1 [SCHEDULE III] (See rule 3) AMBIENT AIR QUALITY STANDARDS IN RESPECT OF NOISE Area Code Category of Area Limits in dB(A) Leq. Date Time Night Times (A) Industrial Area 75 70 (B) Commercial Area 65 55 (C) Residential Area 55 45 (D) Silence Zone 50 40 Note : 1. Day time is reckoned in between 6 a.m. and 9 p.m. 2. Night time is reckoned in between 9 p.m. and 6 a.m. 3. Silence zone is defined as areas upto 100 meters around such premises as hospitals, educational institutions and courts. The Silence zones are to be declared by the Competent Authority. Use of vehicular horns, loudspeakers and bursting of crackers shall be banned in these zones. 4. Mixed categories of areas should be declared as one of the four above mentioned categories by the Competent Authority and the corresponding standards shall apply. 1 Schedule III inserted vide GSR 1063(E), dt. 26.12.89, published in the Gazette No. 643 dt. 26.12.89. The Environment (Protection) Rules, 1986 536 1 [SCHEDULE IV] (See rule 3) STANDARDS FOR EMISSION OF SMOKE, VAPOUR ETC. FROM MOTOR VEHICLES : (1) Every motor vehicles shall be manufactured and maintained in such condition and shall be so driven that smoke, visible vapour, grit, sparks, ashes, cinders or oily substance do not emit therefrom. (2) On and from the 1 st day of March, 1990, every motor vehicle in use shall comply with the following standards : (a) Idling CO (Carbon monoxide) emission limit for all four wheeled petrol driven vehicles shall not exceed 3 per cent by volume; (b) Idling CO emission limit for all two and three wheeled petrol driven vehicles shall not exceed 4.5 per cent by volume; (c) Smoke density for all diesel driven vehicles shall be as follows : Method of Test Maximum smoke density Light absorption coefficient m- 1 Bosch units Harridge units (a) Full load at a speed of 60% to 70% of maximum enginerated speed declared by the manufacturer. 3.1 5.2 75 (b) Free acceleration 2.3 - 65 (3) On and from the 1 st day of April, 1991 all petrol driven vehicles shall be so manufactured that they comply with the mass emission standards as specified at Annexure ‘I’. The breakdown of the operating cycle used for the test shall be as specified at Annexure ‘II’ and the reference fuel for all such tests shall be as specified in Annexure ‘III’ to this Schedule. (4) On and from the 1 st day of April, 1991, all diesel driven vehicles shall be so manufactured that they comply with the mass emission standards based on exhaust gas capacity as specified at Annexure ‘IV’ to this Schedule. (5) On and from the 1 st day of April, 1992, all diesel driven vehicles shall be so manufactured that they comply with the following levels of emission under the Indian driving cycle :- 1 Schedule IV inserted vide G.S.R. 54 (E) dt. 5.2.90 published in the Gazette No. 45 dt. 5.2.90. The Environment (Protection) Rules, 1986 537 Mass of Carbon Monoxide (CO) Maximum, Grams per KWH Mass of Hydroxy carbons (HC) Maximum Grams per KHW Mass of Nitrogen Oxides (NC) Maximum Grams per KWH 14 3.5 18 (6) Each motor vehicle manufactured on and after the dates specified in paragraphs (2), (3), (4) and (5) shall be certified by the manufacturers to tbe conforming to the standards specified in the said paragraphs and the manufacturers shall further certify that the components liable to effect the emission of gaseous pollutants are so designed, constructed and assembled as to enable the vehicle, in formal use, despite the vibration to which it may be subjected, to comply with the provisions of the said paragraphs. (7) Test for smoke emission level and carbon monoxide level for motor vehicles – (a) Any officer not below the ranks of a sub-inspector of police or an inspector of motor vehicles, who has reason to believe that a motor vehicle is by virtue of smoke emitted from it or other pollutants like carbon monoxide emitted from it, is likely to cause environmental pollution, endangering the health or safety of any other user of the road or the public, may direct the driver or any person incharge of the vehicle to submit the vehicle for undergoing a test to measure the standard of black smoke or the standard of any of the other pollutants. (b) The driver or any person incharge of the vehicle shall upon demand by any officer referred to in sub-paragraph (a) submit the vehicle for testing for the purpose of measuring the standard of smoke or the levels of other pollutants or both. (c) The measurement of standard of smoke shall be done with a smoke meter of a type approved by the State Government and the measurement of other pollutants like carbon monoxide shall be done with instruments of a type approved by the State Government. The Environment (Protection) Rules, 1986 538 ANNEXURE-I (See paragraph 3) MASS EMISSION STANDARDS FOR PETROL DRIVEN VEHICLES 1. Type Approval Tests : Two and Three Wheeler Vehicles Reference Mass, R (Kg) CO (g/km) HC(g/km) 1 2 3 R  150 12 8 150<R350 12 + 8 + R>350 30 12 Two and Three Wheeler Vehicles Reference Mass, R (Kg) CO (g/km) HC(g/km) 1 2 3 rw1020 14.3 2.0 1020<rw1250 16.5 2.1 1250<rw1470 18.8 2.1 1470<rw1700 20.7 2.3 1700<rw1930 22.9 2.5 1930<rw2150 24.9 2.7 rw>2150 27.1 2.9 18 (R-150) 200 4 (R-150) 200 The Environment (Protection) Rules, 1986 539 2. Conformity of Production tests : Two and Three Wheeler vehicles : Reference Mass, R (Kg) CO (g/km) HC(g/km) 1 2 3 R - 150 15 10 150<R350 15 + 10 + R>350 40 15 Light Duty Vehicles : Reference Mass, rw (Kg) CO (g/km) HC(g/km) 1 2 3 rw1020 17.3 2.7 1020<rw1250 19.7 2.7 1250<rw1470 22.5 2.8 1470<rw1700 24.9 3.0 1700<rw1930 27.6 3.3 1930<rw2150 29.9 3.5 rw>2150 32.6 3.7 For any of the pollutants referred to above of the three results obtained may exceed the limit specified for the vehicles by not more than 10 per cent. Explanation : Mass emission standards refers to the gm. of Pollutants emitted per Km. run of the vehicle as determined by the chassis dynamometer test using the Indian Driving Cycle. 25 (R-150) 200 5 (R-150) 200 The Environment (Protection) Rules, 1986 540 ANNEXURE-II (See Paragraph 3) BREAKDOWN OF THE OPERATING CYCLE, USED FOR THE TESTS No. of Operation Acceleration (m/acc 2 ) Speed (Km/h) Duration of each operation(s) Cumulative time(s) 1 2 3 4 5 01. Idling - - 16 16 02. Acceleration 0.65 0-14 6 22 03. Acceleration 0.56 14 – 22 4 26 04. Declaration -0.63 22 – 13 4 30 05. Steady speed - 13 2 32 06. Acceleration 0.56 13 – 23 5 37 07. Acceleration 0.44 23 – 31 5 42 08. Deceleration -0.56 31 – 25 3 45 09. Steady Speed - 25 4 49 10. Deceleration -0.56 25 – 21 2 51 11. Acceleration 0.45 21 – 34 8 59 12. Acceleration 0.32 34 – 42 7 66 13. Deceleration 0.46 42 – 37 3 69 14. Steady speed - 37 7 76 15. Deceleration -0.42 37 – 34 2 78 16. Acceleration 0.32 34 – 42 7 85 17. Deceleration -0.46 42 – 27 9 94 18. Deceleration -0.52 27 – 14 7 101 19. Deceleration -0.56 14 – 00 7 108 The Environment (Protection) Rules, 1986 541 ANNEXURE-III (See Paragraph 3) REFERENCE FUEL FOR TYPE AND PRODUCTION CONFORMITY TESTS S. No. Characteristics Requirements Method of test (ref. of P: or IS: 1448*) 87 Octane 93 Octane 1 2 3 4 5 1. Colour, visual Orange Red - 2. Copper-strip corrosion for 3 hours at 50 o C Not worse than No. 1 P : 15 (1968) 3. Density at 15 o C Not limited but to be reported P : 16 (1967) 4. Distillation : P: 18 (1967) (a) Initial boiling point * methods for test for petroleum and its products. Not limited but to be reported (b) Recovery up to 20 o C percent by volume min. 10 10 (c) Recovery upto 125 o C 50 percent by volume 50 50 (d) Recovery upto 130 o C percent by volume 90 90 (e) Final boiling point, Max. 215 o C 215 o C (f) Residue percent by volume Max. 2 2 5. Octane number (Research method) Max. 87 94 P : 27 (1960) 6. Oxidation stability in minutes, Min. 360 360 P : 28 (2966) 7. Residue on evaporation mg/100 ml. Max. 4.0 4.0 P : 29 (1960) (Air-jat solvent washed) 8. Sulphur, total, percent by weight Max. 0.25 0.20 P : 34 (1966) 9. Lead content (as Pb), g/l Max. 0.56 0.80 P : 37 (1967) or P :38 (1967) 10 Reid Vapour pressure at 38 degree C. kg/Cm 3 Max. 0.70 0.70 P : 39 (1967) The Environment (Protection) Rules, 1986 542 1 ANNEXURE-IV (See Paragraph 4) LIMIT VALUES OF EXHAUST GAS CAPACITY APPLICABLE FOR DIESEL DRIVEN VEHICLES THE ENGINE TESTS AT STEADY SPEED Nominal Flow G(l/s) Absorption Coefficient (Km-1) Nominal Flow G(l/s) Absorption Coefficient (K9-1) 42 2.00 120 1.20 45 1,91 125 1.17 50 1.82 130 1.15 55 1.75 135 1.31 60 1.68 140 1.11 65 1.61 145 1.09 70 1.56 150 1.07 75 1.50 155 1.05 80 1.46 160 1.04 85 1.41 165 1.02 90 1.38 170 1.01 95 1.34 175 1.00 100 1.31 180 0.99 105 1.27 185 0.97 110 1.25 190 0.96 115 1.22 195 0.95 > 200 0.93 1 Annexure IV inserted vide G.S.R. 54 (E) dt. 5.2.90 published in the Gazette no. 45 dt. 5.2.90. The Environment (Protection) Rules, 1986 543 1 [SCHEDULE V] (See rule 12) S. No. Place at which the discharge of any environmental Pollutant in excess of prescribed standards occurs or is apprehended to occur Authorities or agencies to be intimated Appointed under 1 2 3 4 1. Factories as defined under the Factories Act, 1948 (a) owned by Central Government and engaged in carrying out the purposes of the Atomic Energy Act;1962; (i) The Atomic Energy Regu- latory Board (AERB) The Atomic Energy Act, 1962 (ii) The Ministry of Environment and Forests. (b) Factories other than those mentioned in paragraph (a) (i) The Chief Inspector of Factories The Factories Act, 1948 (ii) The Inspector of Factories having local jurisdiction. - do - (iii) The Ministry of Environment and Forests 2. Mine as defined under the Mines and Minerals (Regulation and Development) Act, 1957 (i) The Controller General, Indian Bureau of Mines The Mines and Minerals (Regulation & Development)Act,1957 1 Schedule II relating to rule 12 re-numbered as Schedule V vide G.S.R. 422 (E) dated 19.05.1993, published in the Gazette No. 174 dated 19.05.1993. Entries relating to S.No. 2 corrected in terms of S.O. 64(E) published in Gazette No. 42 dt. 18.01.1988 and corrigendum No. G.S.R. 434(E) dt. 07.04.1988 published in the Gazette No. 181 dt. 07.04.1988. The Environment (Protection) Rules, 1986 544 (ii) Regional Controller of Mines having local jurisdiction - do - (iii) The Ministry of Environment and Forests. - 3. Port as defined under the Indian Ports Act, 1908 (i) Conservator of Ports The Indian Ports Act, 1908 (ii) The Ministry of Environment & Forests - 4. Plantation as defined under the Plantations Labour Act, 1951 (i) The Chief Inspector of Plantations. The Plantations Labour Act, 1951 (ii) The Inspector of Plantation having local jurisdiction. - do - (iii) The Ministry of Environment & Forests. - 5. Motor Vehicles as defined under the Motor Vehicles Act, 1939 (i) State Transport Authority The Motor Vehicles Act, 1939 (ii) Regional Transport Authority having regional jurisdiction. - do - (iii) The Ministry of Environment & Forests. - 6. Ship as defined under the Merchant Shipping Act, 1958 (i) Director General of Shipping The Merchant Shipping Act, 1958 (ii) Surveyor having jurisdiction. - do - (iii) The Ministry of Environment & Forests. - The Environment (Protection) Rules, 1986 545 1[SCHEDULE – VI] (See rule 3A) GENERAL STANDARDS FOR DISCHARGE OF ENVIRONMENTAL POLLUTANTS PART-A : EFFLUENTS S. No. Parameter Standards Inland surface water Public Sewers Land for irrigation Marine coastal areas 1 2 3 (a) (b) (c) (d) 1. Colour and odour See 6 of Annexure-I -- See 6 of Annexure -I See 6 of Annexure-I 2. Suspended solids mg/l, Max. 100 600 200 (a) For process waste water- 100 (b) For cooling water effluent 10 percent above total suspended matter of influent. 3. Particulate size of suspended solids Shall pass 850 micron IS Sieve -- -- (a) Floatable solids, max. 3 mm. (b) Settleable solids, max. 850 microns. 2 4. *** * -- *** -- 5. pH Value 5.5 to 9.0 5.5 to 9.0 5.5 to 9.0 5.5 to 9.0 6. Temperature shall not exceed 5 o C above the receiving water temperature -- -- shall not exceed 5 o C above the receiving water temperature 1 Schedule VI inserted by Rule 2(d) of the Environment (Protection) Second Amendment Rules, 1993 notified vide G.S.R. 422(E) dated 19.05.1993, published in the Gazette No. 174 dated 19.05.1993. 2 Omitted by Rule 2(d)(i) of the Environment (Protection) Third Amendment Rules, 1993 vide Notification No.G.S.R.801(E), dated 31.12.1993. The Environment (Protection) Rules, 1986 546 S. No. Parameter Standards Inland surface water Public Sewers Land for irrigation Marine coastal areas 1 2 3 (a) (b) (c) (d) 7. Oil and grease mg/l Max. 10 20 10 20 8. Total residual chlorin mg/l Max. 1.0 -- -- 1.0 9. Ammonical nitrogen (as N), mg/l Max. 50 50 -- 50 10. Total Kjeldahl Nitrogen (as NH3) mg/l, Max. 100 -- -- 100 11. Free ammonia (as NH3) mg/l, Max. 5.0 -- -- 5.0 12. Biochemical Oxygen demand 1 [3 days at 27 o C] mg/l max. 30 350 100 100 13. Chemical Oxygen Demand, mg/l, max. 250 -- -- 250 14. Arsenic (as As), mg/l, max. 0.2 0.2 0.2 0.2 15. Mercury (as Hg), mg/l, Max. 0.01 0.01 -- 0.01 16. Lead (as Pb) mg/l, Max. 0.1 1.0 -- 2.0 17. Cadmium (as Cd) mg/l, Max. 2.0 1.0 -- 2.0 18. Hexavalent Chromium (as Cr+6), mg/l max. 0.1 2.0 -- 1.0 1 Substituted by Rule2 of the Environment (Protection) Amendment Rules, 1996 notified by G.S.R.176, dated 2.4.1996 may be read as BOD (3 days at 27oC) wherever BOD 5 days 20oC occurred. The Environment (Protection) Rules, 1986 547 S. No. Parameter Standards Inland surface water Public Sewers Land for irrigation Marine coastal areas 1 2 3 (a) (b) (c) (d) 19. Total chromium (as Cr.) mg/l, Max. 2.0 2.0 -- 2.0 20. Copper (as Cu) mg/l, Max. 3.0 3.0 -- 3.0 21. Zinc (As Zn.) mg/l, Max. 5.0 15 -- 15 22. Selenium (as Se.) mg/l, Max. 0.05 0.05 -- 0.05 23. Nickel (as Ni) mg/l, Max. 3.0 3.0 -- 5.0 1 1 24. * * * * * * * 1 25. * * * * * * * 1 26. * * * * * * * 27. Cyanide (as CN) mg/l Max. 0.2 2.0 0.2 0.2 1

Previous and next

All provisions of Environment (Protection) Rules, 1986

Questions people ask

Is rule 26 of Environment (Protection) Rules, 1986 still in force?

No repeal of Environment (Protection) Rules, 1986 is recorded.