Annexure II, Environment (Protection) Rules, 1986: ANNEXURE-II
Environment (Protection) Rules, 1986 - Annexure II
Text of annexure II
ANNEXURE-II
ANNEXURE-II
(For the purpose of Part-D)
The State Boards shall follow the following guidelines in enforcing the
standards specified under Schedule VI:
(a) In case of cement plants, the total dust (from all sections) shall be within
400 mg/Nm3 and 250 mg/Nm3 for the plants upto 200 t/d and more than
200 t/d capacities respectively.
(b) In respect of calcinations process (e.g. Aluminum Plants) Kilns. and step
Grate Bagasse fired-Boilers. Particulate Matter (PM) emissions shall be
within 250 mg/Nm3.
(c) In case of thermal power plants commissioned prior to 01.01.1982 and
having generation capacity less than 62.5 MW, the PM emission shall be
within 350 mg/Nm3.
(d) In case of Lime Kilns of capacity more than 5 t/day and upto 40 t/day, the
PM emission shall be within 500 mg/Nm3.
(e) In case of horse shoe/pulsating Grate and Spreader Stroker Bagasse-
fired-Boilders, the PM emission shall be within 500 (12% CO2) and 800
(12% CO2) mg/Nm3 respectively. In respect of these boilers, if more than
attached to a single stack, the emission standards shall be fixed, based
on added capacity of all the boilers connected with the stack.
(f) In case of asbestos dust, the same shall not exceed 2mg/Nm3.
(g) In case of the urea plants commissioned after 01.01.92, coke ovens and
lead glass units, the PM emission shall be within 50 mg/Nm3.
(h) In case of small boilers of capacity less than 2 tons/hour and between 2
to 5 tons/ hour, the PM emissions shall be within 1000 and 1200 mg/Nm3.
(i) In case of integrated Iron and Steel Plants, PM emission upto 400
mg/Nm3 shall be allowed during oxygen lancing.
The Environment (Protection) Rules, 1986 560
(j) In case of stone crushing units, the suspended PM contribution value at a
distance of 40 meters from a controlled, isolated as well as from a unit
located in cluster should be less than 600 micrograms/Nm3. 1[* * *] These
units must also adopt the following pollution control measures :
(i) Dust containment cum suppression system for the equipment;
(ii) Construction of wind breaking walls;
(iii) Construction of the metalled roads within the premises;
(iv) Regular cleaning and wetting of the ground within the premises;
(v) Growing of a green belt along with periphery.
(k) In case of Ceramic industry, from the other sources of pollution, such as
basic raw materials and processing operations, heat recovery dryers,
mechanical finishing operation, all possible preventive measures should
be taken to control PM emission as far as practicable.
2. The total fluoride emission in respect of Glass and Phosphatic Fertilizers
shall not exceed 5 mg/Nm3 and 25 mg/Nm3 respectively.
23. [In case of copper, lead and zinc smelting, the off-gases may, as far as
possible, be utilized for manufacturing sulphuric acid]
34. [In case of cupolas (Foundries) having capacity (melting rate) less than 3
tonne/hour, the particulate matter emission shall be within 450 mg/Nm3.
In these cases it is essential that stack is constructed over the cupolas
beyond the charging door and the emissions are directed through the
stack, which should be at least six times the diameter of cupola. In
respect of Arc Furnaces and Induction Furnaces, provision has to be
made for collecting the fumes before discharging the emissions through
the stack].
[No. Q-15017/24/89-CPW]
MUKUL SANWAL, Jt. Secy.
1
Omitted by Rule 2(i)(iii) of the Environment (Protection) Third Amendment Rules, 1993, vide G.S.R. 801(E) dated
31.12.1993.
2
Substituted by Rule 2(1)(i); Ibid.
3
Added by Rule 2(1)(ii), Ibid.
The Environment (Protection) Rules, 1986 561
1
[SCHEDULE VII]
[See Rule 3(3B)]
NATIONAL AMBIENT AIR QUALITY STANDARDS
S.
No.
Pollutant Time
Weighted
Average
Concentration in Ambient Air
Industrial,
Residential,
Rural and
Other Area
Ecologically
Sensitive Area
(notified by
Central
Government)
Methods of
Measurement
(1) (2) (3) (4) (5) (6)
1 Sulphur Dioxide
(SO2), µg/m
3
Annual*
24 hours**
50
80
20
80
- Improved West and
Gaeke
- Ultraviolet
fluorescence
2 Nitrogen
Dioxide
(NO2), µg/m
3
Annual*
24 hours**
40
80
30
80
- Modified Jacob &
Hochheiser (Na-
Arsenite)
-Chemiluminescence
3 Particulate
Matter (size less
than 10µm) or
PM10 µg/m
3
Annual*
24 hours**
60
100
60
100
- Gravimetric
- TOEM
- Beta attenuation
4 Particulate
Matter (size less
than 2.5µm) or
PM2.5
µg/m
3
Annual*
24 hours**
40
60
40
60
- Gravimetric
- TOEM
- Beta attenuation
5 Ozone (O3)
µg/m
3
8 hours**
1 hour**
100
180
100
180
- UV photometric
- Chemilminescence
- Chemical Method
6 Lead (Pb)
µg/m
3
Annual*
24 hours**
0.50
1.0
0.50
1.0
- AAS /ICP method
after sampling on
EPM 2000 or
equivalent filter
paper
- ED-XRF using
Teflon filter
7 Carbon
Monoxide (CO)
mg/m
3
8 hours**
1 hour**
02
04
02
04
- Non Dispersive
Infra Red (NDIR)
spectroscopy
8 Ammonia
(NH3) µg/m
3
Annual*
24 hours**
100
400
100
400
- Chemiluminescence
- Indophenol blue
method
1
Substituted by Rule 3 of the Environment (Protection) Seventh Amendment Rules, 2009 notified by G.S.R. 826 (E)
dated 16.11.2009.
The Environment (Protection) Rules, 1986 562
(1) (2) (3) (4) (5) (6)
9
Benzene (C6H6)
µg/m
3
Annual*
05
05
- Gas chromatography
based continuous
analyzer
- Adsorption and
Desorption followed
by GC analysis
10 Benzo(a)Pyre
ne (BaP) -
particulate
phase only,
ng/m
3
Annual*
01
01
- Solvent extraction
followed by
HPLC/GC analysis
11
Arsenic (As),
ng/m
3
Annual*
06
06
- AAS /ICP method
after sampling on
EPM 2000 or
equivalent filter
paper
12
Nickel (Ni),
ng/m
3
Annual*
20
20
- AAS /ICP method
after sampling on
EPM 2000 or
equivalent filter
paper
Annual arithmetic mean of minimum 104 measurements in a year at a particular
site taken twice a week 24 hourly at uniform intervals.
** 24 hourly or 08 hourly or 01 hourly monitored values, as applicable, shall be
complied with 98% of the time in a year. 2% of the time, they may exceed the
limits but not on two consecutive days of monitoring.
Note. ― Whenever and wherever monitoring results on two consecutive days of
monitoring exceed the limits specified above for the respective category, it shall be
considered adequate reason to institute regular or continuous monitoring and further
investigation.]
[File No. Q-15017/43/2007-CPW]
RAJNEESH DUBE, Jr. Secretary
Note : The principal rules were published in the Gazette of India vide Number S.O. 844(E),
dated the 19
th
November, 1986 and subsequently amended vide S.O. 433 (E) dated 18
th
April, 1987, S.O. 64 (E) dated the 18
th
January, 1988, S.O. 8(E) dated the 3
rd
January,
1989, S.O. 190 (E) dated the 15
th
March, 1989, G.S.R. 913 (E) dated the 24
th
October,
1989, S.O. 12(E), dated the 8
th
January, 1990, GSR 742 (E), dated 30
th
August, 1990,
S.O. 23(E), dated the 16
th
January, 1991, GSR 93(E), dated the 21
st
February, 1991, GSR
95(E) dated the 12
th
February, 1992, GSR 329 (E) dated the 13
th
March, 1992, GSR
475(E), dated the 5
th
May, 1992, GSR 797 (E) dated the 1
st
October, 1992, GSR 386(E),
dated the 28
th
April, 1993, GSR 422(E), dated the 19
th
May, 1993, GSR 801(E) dated the
31
st
December, 1993, GSR 176(E), dated the 2
nd
April, 1996, GSR 97(E), dated the 18
th
February, 2009, GSR 149(E), dated the 4
th
March, 2009, GSR 512(E), dated the 9
th
July,
2009, GSR 543(E), dated the 22
nd
July, 2009, GSR 595(E), dated the 21
st
August, 2009
and GSR 794(E), dated the 4
th
November, 2009.
Pollution Control Acts, Rules and Notifications Issued There under
Contents
Part – IV
2.The Environment (Protection)Rules, 1986, as amended to date
ISchedule-I: Standards for Emission or Discharge of Environmental Pollutants from various Industries
1.Caustic Soda Industry
2.Man-Made Fibres (Synthetic)
3.Petroleum Oil Refinery
4.Sugar Industry
5.Thermal Power Plants
6.Cotton Textile Industries (Composite and Processing)
7.Composite Woolen Mills
8.Dye and Dye Intermediate Industry
9.Electroplating Industries
10.Cement Plants
11.Stone Crushing Unit
12.Coke Ovens
13.Synthetic Rubber
14.Small Pulp and Paper Industry
15.Fermentation Industry (Distilleries, Maltries and Breweries)
16.Leather Tanneries
17.Fertilizer Industry
18.Aluminium (Omitted)
19.Calcium Carbide
20.Carbon Black
21.Copper, Lead and Zinc Smelting
22.Nitric Acid (Emission Oxides of Nitrogen)
23.Sulphuric Acid Plant
24.Iron & Steel (Integrated)
25.Thermal Power Plants
26.Natural Rubber Industry
27.Asbestos Manufacturing Units (Including all Processes Involving the use of Asbestos)
28.Calor Alkali (Caustic Soda)
29.Large Pulp and Paper
30.Integrated Iron and Steel Plants
31.Re-Heating (Reverberatory) Furnaces
32.Foundries
33.Thermal Power Plants
34.Small Boilers
35.Coffee Industry
36.Aluminium Plants
37.Stone Crushing Unit
38.Petrochemicals (Basic & Intermediates)
39.Hotel Industry
40.Pesticide Manufacturing and Formulation Industry
41.Tannery (After Primary Treatment)
42.Paint Industry Waste Water Discharge
43.Inorganic Chemical Industry (Waste Water Discharge)
44.Bullion Refining (Waste Water Discharge)
45.Dye & Dye Intermediate Industry (Waste Water Discharge)
46.Noise Limits for Automobiles (Free Field) at One Meter in dB(A) at the Manufacturing Stage to be achieved by the Year 1992.
47.Domestic appliances and Construction Equipments at the manufacturing stage to be achieved by the year, 1993
48.Glass Industry
49.Lime Kiln
50.Slaughter House, Meat & Sea Food Industry
51.Food and Fruit Processing Industry
52.Jute Processing Industry
53.Large Pulp & Paper News Print/Rayon Grade Plants of [Capacity above 24000 MT Per Annum]
54.Small Pulp and Paper (Paper Plant of Capacity upto 24000 MT/Annum
55.Common Effluent Treatment Plants
56.Dairy
57.Tanneries
58.Natural Rubber Processing Industry
59.Bagasse-Fired Boilers
60.Man-made Fibre Industry (Semi-Synthetic)
61.Ceramic Industry
62.Viscose Filament Yarn
63.Starch Industry
64.Beehive Hard Coke Oven
65.Briquette Industry (Coal)
66.Soft Coke Industry
67.Edible Oil & Vanaspati Industry
68.Organic Chemicals Manufacturing Industry
69.Flour Mills
70.Boilers (Small)
71.Pesticides Industry
72.Oil Drilling and Gas Extraction Industry
73.Pharmaceutical (Manufacturing and Formulation) Industry
74.Brick Kilns
75.Soda Ash Industry (Solvay Process)
76.Emission Standard for SO2 From Cupola Furnace
77.Specifications of Motor Gasoline for Emission Related Parameters
78.Specification of Diesel Fuel for Emission related Parameters
79.Coke Oven Plants
80.Specifications of Two-Stroke Engine Oil
81.Battery Manufacturing Industry
82.Environmental Standards for Gas/Naptha-Based Thermal Power Plants
83.Standards/Guidelines for Control of Noise Pollution From Stationary Diesel Generator (DG) Sets (Omitted)
84.Temperature Limit for Discharge of Condenser Cooling Water from Thermal Power Plant
85.Environmental Standards for Coal Washeries
86.Water Quality Standards for Coastal Waters Marine Outfalls
87.Emission Regulations for Rayon Industry
88.Emission Standards for New Generator Sets (upto 19 KW) run on Petrol and Kerosene with implementation Schedule
89.Noise Standards for Fire Crackers
90.Standards for Coal Mines
91.Noise Limit for Generator Sets run with Petrol or Kerosene
92.Standards for Effluents from Textile Industry
93.Primary Water Quality Criteria for Bathing Water
94.Noise Limit for Generator Sets run with Diesel
95.Emission Limits for New Diesel Engines (upto 800 KW) for Generator Sets (Gensets) Applications
96. Emission Standards for Diesel Engines (Engine Rating more than 0.8 MW (800 KW) for Power Plant, Generator Set applications and other Requirements
97.Boilers using Agricultural Waste as Fuel
98.Guidelines for Pollution Control in Ginning Mills
99.Sponge Iron Plant (Rotary Kiln)
100.Common Hazardous Waste Incinerator
101.Incinerator for Pesticide Industry
102.Refractory Industry
103.Cashew Seed Processing Industry
104.Plaster of Paris Industry
II.Schedule-VI: General Standards for discharge of Environmental Pollutants
III.Schedule-VII: National Ambient Air Quality Standards
Button1:
Previous and next
Questions people ask
Is annexure II of Environment (Protection) Rules, 1986 still in force?
No repeal of Environment (Protection) Rules, 1986 is recorded.