Rule 19, The Rajasthan Forest Produce (Establishment & Regulation of Saw Mills) Rules, 1983: Rules not to apply to saw Mills owned by Government
The Rajasthan Forest Produce (Establishment & Regulation of Saw Mills) Rules, 1983 - Rule 19
Text of rule 19
Rules not to apply to saw Mills owned by Government
19. Rules not to apply to saw Mills owned by Government. - The provisions of these Rules
shall not apply to any saw mill owned by Government.
12
[Form I]1
[See Rule 4 & 7]
Application for Grant of Permit/License
To.
The Permit/Licensing Officer,
........................
Subject: - Application for grant of permit to establish / erect sawing
machinery/saw mill and license for operation for conversion/cutting of
timber. (Strike off whichever is not applicable).
Sir,
I/We........... (Name in Block Letters) ........ (address).........is / are willing to erect/establish,
sawing machinery/Saw mill operate at................ (exact location) Village............... Town..........
Tehsil.......... Sub-Division.......... District........ of Rajasthan on an area of ......... (Size).
The details of the proposed sawing machinery/saw mill are as below: -
1. Plan of the saw mill.
2. Details of machinery.
S. No. Name Make Remarks
3. Area from which the timber shall be procured for conversion/cutting operations.
...................................................(Name of villages, towns, cities, etc.)
4. Capacity of the Saw Mill .......................................
5. Application fee has been deposited in the Divisional Office ..................... vide receipt No
.............. dated ..................... a copy of which is attached herewith.
The permit/license may kindly be issued after completion of due formalities at your end.
Signature of the applicant
_________________________________
1. substituted vide Notification no. F. 10(13) Forest/ 2004, G.S.R. 83, dt.13-1-2010
Affix signed
passport size
photo of the
applicant
13
[Form II]1
(See rule 4 & 7)
Permit/License to erect/establish, sawing attested by machinery/saw mill and operate
Registration No. ...............
Affix signed
passport size
photo of the
applicant
Permit/License is hereby accorded to erect/establish sawing machinery/saw mill for
cutting/converting of timber to Shri.............................. (in block letters) S/o............ (Permanent
address) .......... hereinafter to be referred as permit/license holder at............ district (Name of
the site where machinery will be erected) Rajasthan State for establishment/operation..........
Nos. of Saw Mills) of size......... & type......... of subject to the provision of the Rajasthan Forest
Produce (Establishment & Operation of Saw Mills) Rules, [1983] framed under Section 41 of
Rajasthan Forest Act, 1953 on the following conditions, namely: -
Conditions
1. This license shall be valid for 5 years with effect from the date of issue and may be
renewed subsequently as prescribed in these rules.
2. The Permit/License holder shall not alter the location of the saw mill without obtaining the
prior written permission of the licensing officer.
3. The Permit/License holder shall maintain such register and submit such periodical returns
as may be directed by the licensing officer and local Forest Officer within whose jurisdiction
the saw mill is located.
4. The Permit/License holder shall be liable to see that:
(a) the site of the saw mill including the yards for storage of round timber, sawn timber and
waste wood is enclosed within a fence fitted with proper gates.
(b) All the round timber, sawn timber is wood waste is properly stacked according to the
instructions that may be issued from time to time by the supervisory staff so as to facilitate
stock taking.
(c) timber for sawing or conversion is not accepted without a proper certificate of ownership.
_________________________________
1. Substituted vide Notification No. F. 10(13) Forest/ 2004, G.S.R. 83, dt.13-1-2010
14
(d) timber which does not conform to the requirement of clause (c) is not accepted for
conversion and intimation in this regard is forthwith given to the nearest Forest Officer.
(e) the saw mill as well as the timber stored within the premises of the saw mill is open to
inspection at all times by licensing officer or any officer of the Forest Department.
(f) the Permit/License and all documents will be displayed & produced for inspection on
demand by any authority aforesaid.
(g) No expansion or diversification capacity of saw mill is affected without previous permission
of the licensing officer.
Permit/ Licensing Officer's
Signature & Seal Seal of the permit/Licensing Officer.
Place:
Date: ........ 20.......
15
[Form III]1
[See Rule 7A]
Application for Grant of License for Operating Wood Handicraft Saw Mill
To,
The Licensing Officer,
.............................................
Sub.: — Application for grant of license for operating wood handicraft saw mill.
Sir,
I........................ (Name in Block letters) s/o. Shri ........................ r/o of ................ or
Company ................ owned by.................. situated at ................... (Place)................ district,
intends to establish/operate wood handicraft saw mill at.................. Village/Town...................
Tehsil.................. Sub-Division................. District...................
1. The details of the wood handicraft saw mill are as below. -
a. Site Plan (enclosed).
b. Details of machinery as prescribed below (enclosed): -
S. No. Name/Make
with
capacity
Type Size of
saw in cm
Remarks
c. Details of motor/engine (in Horse Power) to be used for running wood handicraft saw mill.
2. Prescribed application fee has been deposited in the Divisional Office vide receipt
No................... dated...................... a copy of which is attached herewith.
3. Details of likely source/sources of procurement of raw material are enclosed. You are
requested kindly to issue the license.
Signature of the applicant
Seal of Company (in case of company)
____________________________________
1. Substituted vide Notification No. F. 10(17) Forest/ 82, G.S.R. 90, dt.4-2-2006
16
[Form IV]1
[See Rule 7A]
License for Wood Handicrafts Saw Mill
Office of the Licensing Officer.............
F. No..........
Dated................
Company.................... Owned by................ situated at................ (Place)............. (district ........
or Shri........ s/o.......... r/o........... is licensed to run wood handicraft saw mill at............... (Name
of place where saw mill is located), for the operation of.................. nos. of wood handicraft
saw mills of size.................... & type............. subject to provisions of the Rajasthan Forest
Produce (Establishment and Regulation of Saw Mills) Rules, 1983, framed under the
Rajasthan Forest Act, 1953, and as amended from time to time, on the following conditions: -
1. The license shall be valid for 5 years with effect from the date of its issue and can be
renewed subsequently as prescribed in these rules.
2. The license holder shall not alter the location of the wood handicraft saw mill without
obtaining the prior permission of the competent authority.
3. The license holder shall maintain such register and submit such returns as required under
the rules
4. The license holder shall be liable to see that: -
a. the site of the wood handicraft saw mill including the yard for storage of sawn timber and
waste wood is enclosed by a fence fitted with proper gates.
b. all the sawn timber and wood waste is properly stocked according to the instructions that
may be issued from time to time by the forest officer so as to facilitate stock taking.
c. swan timber for conversion is not accepted without proper certificate of ownership.
d. no round timber or green timber shall be utilised or stored in the wood handicraft saw
mill.
e. the wood handicraft saw mill is open to inspection at all times by the licensing officer or a
forest officer not below the rank of a Ranger.
f. the license and all documents are produced for inspection on demand by an authority
aforesaid.
___________________________________
1. Substituted vide Notification No. F. 10(13) Forest/ 2004, G.S.R. 83, dt.13-1-2010
Affix signed
passport size
photo of the
applicant
attested by
permit/licensing
officer
17
g. no extension or diversification in the capacity of wood handicraft saw mill is effected
without prior permission of the licensing officer.
Seal of the Licensing Officer Licensing Officer's
Signature
Dated .... day of.... 20...
18
Schedule 'A'1
(See Rule 11)
Daily Register for Job Works
S.
No.
Date Name &
address of
the
customer
Certificate of
Ownership
Quantity
timber sawn
Material
received back
by the
customer
Wastage
detailed
Signature of
the
customer
T.P.
No. &
date
with
details
of its
issue
Bill No. &
date of
authorised
dealer
Cubic
Metre
Qtl. Cub.
Mtrs.
Qtl. Quintals
1 2 3 4 5 6 7 8 9 10 11
Schedule 'B'2
Stock Register
(See Rule 11)
S. No. Date Previous Balance Wood received
Raw material Finished
product
Raw material Finished product
1 2 3(a) (b) 4(a) (b)
Total Material disposed off Balance in hand
Raw material Finished
product
Raw
material
Finished
product
Raw
material
Finished
product
5(a) (b) 6(a) (b) 7(a) (b)
______________________________________
1. Substituted vide Notification No. F. 10(17) Rev. Gr. 8/82, G.S.R. 38, dt.17-5-1985
2. Substituted vide Notification No. F. 10(17) Rev. Gr. 8/82, G.S.R. 38, dt.17-5-1985
19
Schedule 'C'1
(See Rule 11[2])
Wood Procurement/Consumption Details
S. No. Date & No.
of Bill
Receipt including
source of
procurement
Utilised Wastage Balance
Note: - Details of receipts, utilised and wastage shall be kept in appropriate tangible
measuring units.
______________________________________
1. Added vide Notification No. F. 10(17) Forest/ 82, G.S.R. 90, dt.4-2-2006
------
Previous and next
All provisions of The Rajasthan Forest Produce (Establishment & Regulation of Saw Mills) Rules, 1983
Questions people ask
Is rule 19 of the Rajasthan Forest Produce (Establishment & Regulation of Saw Mills) Rules, 1983 still in force?
No repeal of the Rajasthan Forest Produce (Establishment & Regulation of Saw Mills) Rules, 1983 is recorded.