LawGrids logoLAWGRIDS.ORG

Regulation 17, Punjab state warehosing Regulations,1976: (i) Notice for convening a general rpeeting

Punjab state warehosing Regulations,1976 - Regulation 17

Text of regulation 17

(i) Notice for convening a general rpeeting

17. (i) Notice for convening a general rpeeting:— A notice' in writing of atleast 30 days shall be given by the Managing Director to the Shareholders for convening the annual general meeting of the Corporation. ) (i) Businessat the annual genera! meeting:- Atthe annual general meeting the following business shall be transacted, namely:- (a) Consideration of the annual accounts of the Corporation together with the audit report therson. Any other business with the consent of the Chairman. (I) Voting by State Government:- The State Government may, be an order in writing, authorise any of its Officers to act as its representative at the annual general meeting of the Corporation and the Officer so authorised shall be entitled to exercise the same powers on behalf of the State Government as if he were an individual shareholder of the Corporation. The Officer so authorised shall not he deemed to be a proxy. A copy of on order made under sub-regulation (i) (1) (a) shall be deposited with the Managing Director or Secretary of the Corporation before the time fixed for the meeting. . (¢) Anorder made under sub-regulation (iii) (1) (a) may be revoked by the State Government by depositing a notice of revocation before the time fixed for the meeting and the due revocation of an order shall in no way prohibit the issue of another order by the State Government, deposit of another order by the State Goverqment and the deposit of a copy there of with the M.an_ag!ng Director or the Secretary of the Corporation - wnh‘m time limited by sub-regulation (iii)(I)(a) above. Voting by Central Warehousing Corporation. g;?pgfi;gzglrr\r?aDire(t:;or_of the Ce_ntfal Warehousing Wenehousin Cy authorise any official of the Central Corporation and tahlve of the Central Warehousmg entitled to exercise &Person so authorised shall bé Central Warehousin ecs:ame powers on behalf to the individual shareho?d orporation as if he was 12 authorisation so gj er of the C_orporation. The given may be in favour of two (96) Scanned by CamScanner representatives, in the alternative and shall be in writing signed by the Managing Director of the Central Warehousing Corporation. Such authorisation shall be deposited with the Managing Director or the Secretary of the Corporation before the time fix for the meeting. A person acting in terms of the authorisation given under C/ this Sub-regulation shall not be deemed to be a proxy. (w)) Quorum for General meeting,~ <" I"A quorum of the annual general meeting-ofthe hareholders shall be twoIf, Within 30 minutes from the time appomtedWfl% meeting, a quorum is not present, the meeting shall stand adjourned to such date and at such time and place as the Chairman may determine. At the adjourned meeting, business of the last meeting shall be conducted irrespective of there befng a quorum or not. \(/v) Chairman of the General Meeting The Chairman, or in his absence, a Director (other than the Managing Director) chosen by the members present and entitled to vote at the meeting, shall be the Chairman at such a general meeting . loting at General Meeting and decision by Majority: (vi) (a) Atany general meeting, a resolution put to the vote of the meeting shall be decided by show of hands. A decision shall be taken by the majority of votes. In case of equality of votes the Chairman of the general meeting shall have a second or a casting.vote. (b) A declaration by the Chairman of general meeting that resolution has been carried or rejected upon show of hands by the members present and entitled to vote shall be conclusive and an entry to that effect in the books containing minutes of the proceedings of the Corporation shall be sufficient evidence to that effect without proof of the number or proportion of the votes in favour of or against such resolution. (vii) Minutes of General meeting ' (@) The Corporation shall cause minutes of all proceedings of general meetings to be recorded in books kept for that purpose. (b) Any such minutes, if signed by the Chairman of the meeting at which the proceedings take place or by the Chairman of the next succeeding meeting, shall be evidence of such proceedings. (97) - —— S R Scanned by CamScanner (c) Until the contrary is apprqved, every general meetip in respect of the proceedings where-of minutes hay, been recorded shall be deemed to have been dy called and held, and all proceedings taken placg thereon, to have duly taken place. Section42 (2)(f) 18. Working of the Engineering Cell — Accounting procedure, The Accounting Procedure to be following for the working of Engineering Cell of the Corporation in the matte_-rs of execution of works, maintenance of accounts, delegation of powers, shall be such as is specified in Appendix I. Appendix | CHAPTER | DEFINITIONS 1. ADMINISTRATIVE APPROVAL : This term denotes an order to the Engineering Cell ot execute certain work at a stated sum to meet the administrative needs of the Punjab State Warehousing Corporation. 2. COMPETENT AUTHORITY : In relation to the exercise of any power means Board of Director of the Punjab State Warehousing Corporation (in consultation with the share holders where ever necessary) or any other authority to which such powers may be delegated. MAJ(_)R ESTIMATE : Is a term applied to the estimate for a work, when the sanctioned amount of the works expenditure exceeds Rs. 10,000 or any other amount which may be fixed by the Competent Authority. 4. - MlNQR' ESTIMATE : Is a term applied to the estimate for a work, when the §ar_xctnoned amount of the works expenditure exceeds Rs. 10,000 on any other limit may be fixed by the Competent Authority. 5. MARKET RATE : Used in res of the Engineering Cell, this te; or an Article of similar desci stores godowns from the obtaining supply thereof. 6. TECHNICAL SANCTION : This is an i i NI : orde ! sanctioning a properly detaileq estim the cost o & ot : ate of the cost of a work of construction or repair proposed to i A : ' Corporation. P be carried out in the Punjab State Warehousind - pect of an article, borne on the stocks accounts rm indicates the cost per unit at which the articles: ription can be procured, at a given time at the public market suitable to the Engineering Cell for Scanned by CamScanner 1ne Punjab State Warehousing Corporatio 2.1 22 2.3 24 25 26 2.7 2.8 29 2.10. _ _ , ‘ CHAPTER 1 MAIN OUTLINES OF ACCOUNTS The main features of the system of the work Accounts of the En nare:- The Accounts Officer subject to overall Disbursing Officer of the Engineering Cell, who is permitted to operate Bank Account‘s ant'i obtain funds by cheques required for all disbursements in connection with the execution of works. gineering Cell supervision of the M.D. is the primary He collects the receipts of the Pun them into the Bank Account of th The Accounts of these receipt and disbursements are compiled under his supervision by the Accountant posted in the Engineering Cell and submitted monthly to the Head Office of the Corporation. The Accounts of the stores received in the Engineering Cell are to be clearly maintained under the supervision of the Executive Engineer and are to be made available for audit to the Accounts Officer or any other Officer authorised by the M.D./A.O. The charges on each godown are to be booked separately in the accounts of the Engineering Cell under separate heads of expenditure. Personal payments to all the officers/Officials posted in the Engineering call are to be made on bills prepared by the Administrative Branch and accounts thereof are to be kept in the Head Office of the Corporation in accordance with the general rules applicable to all such payments of other staff of the Corporation. All the accounts books should be kept in the Engineering Cell and the XEN has to satisfy the audit that the claim accepted is valid. The voucher should be a complete proof of the payment which it supports and accounts should be correct in all respects. jab State Warehousing Corporation and pay e Corporation. In the absence of any specific instuctions general rules and regulations given in Punjab PWD Code, Account Code Volume 11l and Financial Hand Book No. 3 would apply. All the expenditure in connection with the construction of godowns whether direct or indirect in form of salaries to staff, tools & plans or miscellaneous expenditure etc. shall be booked in the final accounts by the accounts branch under a general ledger head “Godowns Construction Account”. A bi-ledger containing a detailed sub-headwise account of the expenditurg book under the head “Godowns Construction Account” shall be kept in th'e Engineering Cell under the supervision of the Accountant. The balances of th]s ledger shall be worked out monthly and reconciled with the balances shown in the general ledger under the head referred to above. A copy of the trial balance; of this ledger shall be supplied by the Engineering Cell to the Accounts Brancl monthly. (99) Scanned by CamScanner CHAPTER 11l GODOWNS AND HEADS OF THE ACCOUNTS FOR CONSTRUCTION OF EXPLANATORY NOTE FOR THE ACCOUNTAL OF TRANSACTIONS THEREUNDER:- 31 (a) FIXED ASSETS (i) Godowns :- All payments to the contractors and suppliers in conrjection with a specific godown against passed bills shall be charged and debited to the accounts of that particular godown under this detailed head. Slmllarlyt.he pay and allowances of the work charged establishment shall also bg debited to the account of particular godown on which employed. Otherwise payments shall also be debited to the accounts of a particular godown to which the same partains, A separate account shall be kept for each godown. The number of accounts shall be as many as the number of godowns to be constructed. A bi-ledger for godown-wise expenditure booked under their head shall be maintained in the Engineering Cell. 32 (a) FIXED ASSETS (ii) Land:- The expenditure if any in connection with the purchase of land for purpose of the construction of the godowns will be booked in the general ledger head “Godowns Construction Account” but in the bi-ledger it should be classified under this detailed head. 33 (b) CURRENT ASSETS (i) TOOLS AND PLANTS:- The cost of furniture, instruments, plants machinery, tools etc. as far as possible shall be charged to the particular godown for which purchased, treating this type of expenditure as work charged tools and plants. However, wherever such articles are purchased for general use for all on a group of godowns, its cost may be charged to the respective estimates and detailed accounts kept in the manner and as per PWD system of accounts and expenditure thereof booked under this head. 3.4 (c) EXPENDITURE (i) Establishment :- A Separate pay register shall be m staff and separate pay bills shall be in the Engineering Cell. The expen ledger head expenditure A/C of Pa accounts the total expenditure on t worked out for this register and a aintained in respect of Engineering Cell prepared for the officers/Officials working diture shall first be debited to the general y of staff but at the time of closing annual he pay of the Engineering cell Staff shall be djusted as under in the Account Books. “Debit Godowns construction A/C” “Credit Expenditure A/C Pay of staff : The Details of this adjustment shall b supplied by the closing Branch of the Engineering Cell through a debit note: A sepa.rate TA Check Register shall be kept in the Accounts Branch in respect of Engineering Cell staff and all T.A. bills entered therein. The expenditure shal (100) 4 Scanned by CamScanner be debited to the general ledger head Expenditure A/C TA and Conveyance charges at the time of closing the annual accounts the total amount of TA paid to the Engineering Cell staff during the period shall be ‘ ! worked out from this register and adjusted as under in the book of the accounts branch. Debit : Godown Construction A/C. Credit : Expenditure A/C TA and Cohveyance charges. Detail of this adjustment shall be supplied by the Accounts Branch to the Engineering Cell through a debit note. A separate medical reimbursement check register shall be kept in the Account Branch in respect of Engineering Cell staff and all bills for medical reimbursement charges on the close of the accounting year the Establishment Branch shall prepare and work out the total amount of medical reimbursement paid to the Engineering Cell staff and supply the statement to the Accounts Branch for adjustment as under:- Debit : Godown Construction A/C. Credit : Expenditure A/C Medical Reimbursement charges. Details of this adjustment shall be supplied by the Accounts Branch to the Engineering Cell thereafter in a debit note. Separate bills shall be prepared by the Accounts Branch in respect of employee’s share of Provident Fund of Engineering Cell staff and adjusted monthly as above. Details of this adjustment shall be supplied by the Account Branch to the Engineering Cell through debit note. A separate register in respect of construction staff shall be kept and the amount debited to the general ledger ‘head’ expenditure A/C leave salary and pension contribution. At the close of the annual accounts a statement shall be prepared in a manner explained above and amount adjusted as under:- Debit : Godown Construction A/C. Credit : Expenditure A/C Leave salary and pension contribution. Details of this adjustment shall be supplied by a debit note. (c) EXPENDITURE (ji) Contingencies:- The bills relating to the charges of electricity, water charges, rent, rates, taxes, postage, telegraphs, telephone, entertainment, printing and other such expenditure relating to the Engineering Cell at the Head Office shall as fa_lr as possible be routed through Engineering Cell and the charges shall accordmglfi be debited to the general ledger ‘Head' Godowns Construction A/C. All SuG bills of field Engineering Cell Office shall also be dealt with as above a:‘e‘f ";z bill relating to the head Office which cannot be allocated relating purely (101) Scanned by CamScanner 3.6 4.1 42 Engineering Cell shall be dealt with as usual and the expenditure charged to heads of account as at present. PERSONAL ACCOUNT (d) (i) Material Supplied or Misc. Advance:- Payment to the suppliers on the basis of document presented through banks for advance payment shall be made by the Accounts Branch on the authority of Engineering Cell and amount debited to general ledger Head Godown Construction A/C. In the Accounts books maintained in the Engineering Cell, this amount shall be debited to this sub-head which shall be cleared or adjusted on the basis of certified bills duly passed by the Engineering-in-charge. (d) (ii) Imprest to Staff A/C The advance made to construction staff to meet day-to-day expenses shall be accounted for under this sub-head. On receipt of imprest A/C from the officals this sub-head shall be cleared by contra debited to the concerned sub head. This adjustment shall be made in the books of the Engineering Cell. (d) (iii) Security or deposit A/C :- The amount of earnest money on security deposit recommended from the contractor’s bill shall be accounted for under this sub-head. (d) (iv) Head Office A/C :- The contra debit of credit effect of all the payments made by the Accounts Branch shall be accounted for in the books of Engineering Cell under this sub- head. CHAPTER IV PROCEDURE OF WORKING OF ENGINEERING CELL REGARDING CONSTRUCTION OF GODOWNS OR OTHER BUILDINGS WORKS :- In accordance with the PW.D. rules for the works costing upto Rs. 20,000 the work orders are drawn and above this amount formal contract agreement is executed between the parties. The S.W.C.is a Small organisation as compared to PW.D. as such the work orders would be drawn upto the amount of Rs. 10,000/~ and agreement beyond Rs. 10,000/~ N.I.T./Estimates should be prepared on PW.D. schedule of rates. The work orders will be drawn by the S§.D.0. on the basis of the quotations called by him. Construction Agreement:- Tenders would be called by the XEN with due notice from contractors of the Punjab PWD (B.&R.), Railway, Central P.W.D., M.E.S., Union Territor, Chandigarh etc. by giving wide publicity in the Press as well as in local PW.D. divisions etc. After the receipt of tenders, these shall be opened by the XEN at the specified tim(t.\ and date in the presence of tenderers or their authorised agents if they so like and the Sub-Divisional Officers and other Officer deputed (102) 4 Scanned by CamScanner 4.3 44 py M.D. XEN, will prepare various tenders alongwith the ¢ py the following committees:- 1. Executive Enginesr-Ch 2. Accounts Officer or Assistant Accounts O 3. Secretary or the Storage 4, Sub-Divisional Officer The Committes will recommand the 2 letter will then be issued by the XEN 2 If possible without any harm to w also be obtained from the Committe Purchase of Material : For the purch for whole of construction nace sary te processed as per procedure given un a case for making purchase cannot g rates received by calling quotati of the materials offered ha Cell may need certain material or T&P be possible to go into usual formalities of C"‘.Q purchase through purcha suppliers, check the suitability of ma suppliers on the spot. The purch purchase after taking necessary a constituted as under : For purchase Upto Rs. 5000/~ (i) Sub Divisional Officer (i) Warehouse Manager/Representative of the case of H.O. For purchase of more than Rs. 5000/- (i) Managing Director or his representative. (i) XEN or his representative (i) Accounts Officer or his represantative (iv) One Sub Divisional Enginzer. Labour Rates : The President of India is pleased to amend Sub Regulation 4 (IV) o C gulatior of Appendix 1 of Punjab State Warehousing Corporation Re under : (103) Scanned by CamScanner 4.5 4.6 “Labour Rates : If circumstance warrant, labour can be engaged by the Engineering Cell departmentally on the rates given in the Punjab PWD schedylg of rates as applicable to the particular zone. The Executive Engineer v have full power to sanction the rates of departmental labour after considering the non-availability of labour on scheduled rates within the prevailing ceiling fo; the PWD Zone recording full justification. In case the work charged staff is t, be employed on the supervision of the construction of godown at site, thegg would be employed in running time scales as admissible to the corresponding categories from time to time in the state PWD (B&R). (This notification issues with the concurrence of the Finance Department conveyed vide their U.O. No. 10/FD (BPE) SOVI-Warehousing dateq 17.1.1985.) Amended vide notification No. 14-12 Agri. Il (8)/84/15551, Chandigarh, dated 29.1.85 by the Government of Punjab Department of Agriculture (Agriculture || Branch). Negotiation of Tenders : The tender Committee can negotiate with the lowest tenderer if the rate is considered high. In case the lowest tenderer does not agree to reduce the rate the negotiations can be held by the committee with the next lowest tenderer so as to arrive at reasonable fair rates. In case of single tender, the committee can also recommend acceptance of the same rate if otherwise found reasonable. Measurements/Buildings/Payments : Measurements of the work will be done by the Overseer, Sectional Officer and entered in the Measurement Book and the SDO will check these to the maximum as far as possible but atleast 50% and in case of concealed item 100% check and test check of atleast 10 of the amount should be done by the XEN himself. The rates for each item will be entered by the SDO himself in the final bill which shall be audited in the office of XEN and then the payment will be made by the Accounts Officer. Payment of all bills shall be made by the Accounts Officer after these are passed by the XEN on proper scrutiny. The accounts of expenditure will be maintained in the XEN’s Office in the same way as is being done in PWD with the slight modification that the unnecessary forms and returns will_ be. eliminated. The expenditure of the construction of godowns will be maintained sub headwise as in PWD so that atany time this could be scrutinised and checked. Similarly the payments for supply of material etc. will be made by the Accounts Officer on the basis of bill duly passed by the XEN.The bills of work charged staff and labour employed departmentally shall be passed by the XEN and the payment of the same will be made by the SDO out of the imprest given to him for the purpose. The imprest will be i DO by the Accounts Officer, which shall be prest will be issued to the S direametances got recouped monthly or earlier in specid (104) Scanned by CamScanner 47 48 MATERIAL AND T&P A/C One of the servin i ) g Superintending Engi nominated by the Chai g Engineer of the Punjab bstween the Punjab g;rtzavr\llwould br:‘! usually Arbitrator irJ1 cazg)?’afi&z' e arehousing Corporation & the Contractor}//SuI;S)p}{te plier CHAPTER V PROCE DURE REGARDING SUBMISSION OF CONTRACTORS BILL FOR 5.1 52 5.3 5.4 5.5 5.6 5.7 PAYMENT Instructions of postin g the measurement B i M.B. be carefully read and followed. ik While repprdmg measurements and carrying forward the same in the abstract of quantme:s and abstract of cost the cross reference of the pages from which record entries are carried forward be invariably given to avoid difficulty in locating the record entries for comparing with the abstract of quantities and cost. Complete description of items as per contract be given while recording record entries and abstract quantities and cost. It should be verified that the rates are as per contract. Any jitem not covered by the contract must be got approved before hand by submitting analysis of rates. Wherever the carriage of earth and sand is allowed from a distance more than that provided in the contracts that also with the prior approval of the M.D. after giving full justification through XEN the SDO should verify after satisfying himself that the lead is correct. He should also give the following certificate : “ have myself verified the distance of lead for which carriage is being paid in case of item No-I SENO. cecrnrmeese The bill should be prepared on the proper form and amoun should invariably be worked out. f final bills the following certi t since last certificate ficates should be recorded by the SDO In case o concerned. iy Certified that the work has been rexecute Specifications, 1963 as per drawings SUP i) Certified thatthe lead of Carriage paid vide item NO. oo has been verified by mé personally and is correct. o with the PWD e. of the bill d in accordance Wi plied from time to tim (105) Scanned by CamScanner 5.8 5.9 5.10 5.11 5.12 Note : i)y Certified that all the rates provided in this bill are as duly approved by the XEN vide No. .............. dated The bills of the supplier’s should be on the printed bill forms and not on blank papers and where the sales tax is claimed by the firm and is recommended t, be paid the sales tax number must be got mentioned from the supplier on the bill. per contract ang are All cuttings and corrections in the M.Bs. and bills be initialled by the person making such corrections. The SDE should attest undeAr full signatures, the main corrections of all types which have effect of increaglng or decreasing the measurements recorded by the Overseer/Sectional Officer. In case of bills of purchases the sanction referenc has been affected by the quotations besides the fo “Purchase has been effected from the lowest tenderer after inviting regular quotations” e with which the purchase llowing certificate, Payment for unmeasured work shall not be made. account of supply of material, penalty on account of late completion of work, bad work ete, should be receive, PWD standard forms shall be used with necessary modifications wherever necessary. List of important forms is at Annexure ‘A’ (106) Scanned by CamScanner CHAPTER VI e delegations given below are subject to the following general limitations :- 0 The provisions of Warehousing Corporation Act. Rules & Regulations made thereunder; i) The general policy as laid down by the Board of Directors from time to time. iy Observance of the canons of financial propriety; (iv) Allocations made for specific purposes in the budget and () Compliance with each rule/direction as prescribed by the Punjab Government SrNo. Nature of Power Authority Powers delegated 6.1 Purchase of land (it shall, Chairman Full powers subject to the policy howeyev. be generally instruciton laid down by the Board of acquired through Punjab Directors for land costing less then Rs. Gowt.) 1 lac and futher subject to the condition that (i) certificate of reasonability of rate has been issued by the competent revenue authority and (ii) the position of the local sale rate has been ascertained from the local Registration Office. M.D. Full powers for land not costing more than 50,000/- subject to the condition that (i) certificate of reasonability of rate has been issued by the competent revenue authority and (ii) the position of the local sale rate has been ascertained from the local Registration Office. 6.2 Sanction of capital works Chairman Full powers in respect of the capacity M.D. approved by the Board of Directors. Full powers in respect of Capital works costing upto Rs. Five lac subject ot the capacity already approved by the Board of Directors. 6.3 Ceilig for and acceptance of Chairman Full powers. , tenders/contracts. M.D. Full powers subject to limit of Rs. five a) Acceptance of tenders lakhs. when open tenders are invited and when more the one valid tender is received. (See Annexure ‘B’ Page No. viii to xii) (107) Scanned by CamScanner 6.4 6.6 6.6 6.7 6.8 6.9 b) When only one valid tender is received c) Calling for and acceptance of tenders for works when limited tenders are invited for reasons to be recorded in writing. d) Award of contract by negotiations without calling for tenders in emergent cases reasons to be recorded in writing. e) Acceptance of tenders other than lowest for reasons recorded in, writing. To Sanction ete. supplementary items and minor devlations in contracts for works. . Executlon of contracts in respect of sanctioned works ~ and approved tenders. Exension of time limits of contracts. To waive or reduce penalties stipulated in the contract, To invite and accept tenders for purchase of construction material. - Sale of surplus stores, Chairman M.D. Chairman M.D. Chairman M.D. Chairman M.D. Chairman M.D. XEN XEN Chairman MD. Chairman M.D. M.D. Chairman M.D. (108) Full powers. Full powers in respect of works o less than Rs. 2,00,000/- Osting Full powers. Full powers limited to Rs, 2,00,000/. Full powers. Upto Rs. 50,000/- Full powers. Full powers as long as the differences between the lowest tender and the accepted tender does not exceed 5%, Full Powers. Full powers provided the deviations does not result in excess over 10% of the original value of contract. Reasons to be recarded in writing. Full powers provided the deviations does not result in excess over 10% of the original value of contract. Reasons to be recorded in writing. Full powers Full powers Full powers in respect of the contracts awarded within his comptence, provided the extention granted does not exceed 1/3 of the time stipulated in the contract Full powers; the Cormp in any individual Board of Upto Rs. agreement. , provided the loss If any to oration exceeding. Rs. 10,000 case is reported to the Directors, 5,000/- Full powers. Full powers, Full powers by inviting tenders. 4 Scanned by CamScanner .16 16 Write off shortage of articles of dead stocks, losses of stores, cash, tools and plants. Writing off irrecoverable loss of money/item of dead stock. Technical sanction. Administrative approval/ financial sanction. Local purchases for execution of (construction) work sanctioned Powers of levy compensation/ ' penalty on contractors in case of bad work. Advertisement charges of tenders elc. relating to supply of material construction of godowns etc. To create posts of wdrk charged establishment. Appointment of work charged staff. To sanction the purchase of T&P. To senction repairs and carriage of T&P. Signing of cheques. Chairman M.D. - Chairman XEN SDO - Chairman XEN XEN M.D. XEN M.D. XEN Chairman/ M.D. (Jointly) AAO (Singly) DGM (Singly) Full powers provieded the loss does not exceed 1000/- Upto Rs. 1000/- in each case. Upto Rs. one thousand. Upto Rs. 250/- Full powers. Upto Rs. 5000/- Full powers. Upto Rs. two lacs. Upto Rs. 5000/- Subject to Rs. 1000/- with the condition that the demand should not be split to avoid sanction of higher authorities. Full Powers as provided in the contract Full powers. Full powers subject to provision in the estimate. -do- Full powers. Full powers. Full powers. Rs. 5,00,000/- Rs. 20,00,000/- DGM & AMD Exceeding Rs. 20 lacs. (Jointly) NOTE :- In the absence of Accounts Officer, all powers delegated to Accounts Officer shall be exercised by the Assistant Accounts Officer. (109) ‘The Amendments are vide order No. PWC/Acctts/39755-926/2001 dated 5.12.2001 Scanned by CamScanner LIST OF FORMS Sr. Nomenclature of form Form Nos. No. 1. The Muster Roll Form Punjab State Warehousing Corporation, (W) 1. 2. Casual Labour Roll Form Punjab State Warehousing Corporation. (W) 2. 3. The Measurement Book Form Punjab State Warehousing Corporation, (W) 3. 4. First and final bill form Form Punjab State Warehousing Corporation, (W) 4. 5. Running Account Bill Form Form Punjab State Warehousing Corporation, (W) 5. 6. Running Account Bill Form Form Punjab State Warehousing Corporation, (W) 6. 7. Running Account Form Punjab State Warehousing Corporation. W) 7. 8. Head Receipt Form Form Punjab State Warehousing Corporation. (W) 8. 9. Indenture for secured Form Punjab State Warehousing Corporation. ) advances (W) 9. 10. Pay Bill of Work Charged ~ Form Punjab State Warehousing Corporation. Establishment (W) 10. (110) Scanned by CamScanner

Previous and next

All provisions of Punjab state warehosing Regulations,1976

Questions people ask

Is regulation 17 of Punjab state warehosing Regulations,1976 still in force?

No repeal of Punjab state warehosing Regulations,1976 is recorded.