Rule 7, THE UTTAR PRADESH BOILER RULES,1969: (i) Fees for Inspection and test during construction
THE UTTAR PRADESH BOILER RULES,1969 - Rule 7
Text of rule 7
(i) Fees for Inspection and test during construction
7. (i) Fees for Inspection and test during
construction.--Fees for inspection of boilers and parts
thereof
under construction shall be the same as prescribed in
regulation
395-A, 395-B, 395-G, 395-D and 395 E.
(ii) Cost Mountings and Fittings. (a) Fees shall be
charged as required under Regulation 395-G. and 395 D.
Fabricated mountings and fittings.-(b) A fee of Rsl 150.00
shall be charged for examination and certification of single
lot of
mountings and fittings not exceedings ten.
The manufacturer, in addition, shall supply fee of charge
the labour and appliances which may be necessary for such
mechanical tests as are required under the Regulation.
Failing to
find facilities for the prescribed test, the manufacturer shall
bear
the cost of carrying out such tests elsewhere.
(c) The charges for the examination of drawings only
for
mountings and fittings to be manufactured shall be Rs. 150
for
each such drawing.
(iii) Fees for inspection, examination, testing and cent,
fication of boilers tubes and scantlings under
construction.—
The inspection fee for boilers constructed in India shall be
calculated as per Regulation 395 A :
(a) at Four times the registration fee for a boiler of
riveted construction ;
(b) at four times the registration fee for a boiler of
welded construction.
( i v ) F e e s f o r i n s p e c t i o n
o f b o i l e r s c a n t l i n g s d u r i n g
construction shall be charged as Regulation 395 G
Fees for inspection of tubes and pipes shall be
charged at
Rs. 100.00 per metric tonne or a fraction there of [Regulation
395
A ii (3)1
The manufacturer, in addition, shall supply free of
charge
the labour and appliances which may be
necessary for such
mechanical tests as may be carried out in his premises
or those
of the steel makers and tube makers in
accordance with the
standards laid down in the Regulations. Failing to dind
facilities
himself for the prescribed tests, the manufacturer shall
bear the
cost of carrying out these tests elsewhere.
( v ) Fees for examination and certification
of scantling of
boilers steam pipes, economisers and superheaters
during
fabrication at s i t e — T h e f e e s f o r s u c h
e x a m i n a t i o n a n d
ce r t i f i c a t i o n f o r s u p er v i s i o n req u i r ed
u n d er c l a u s e ( v ) o f
Regulation 4 shall be equivalent to the fees
required for the
registration of the boiler.
The owners or erectors shall supply free of charge the labour
and appliances which may be necessary for such tests as
may be
carried out in their premises in accordance with the
standards
laid down in the Regulations. Failing to find facilities
themselves
for the prescribed tests they shall bear the cost of
carrying out
these tests elsewhere.
( v i ) Fee for the examination of plans
of Boilers. The fee
for the scrutiny of plans under sub-regulation (a) of
Regulation
393 shall be on the scale prescribed in Regulation 385, but
when
a plan which has been scrutinized and in respect of
which
alterations have been suggested is re-submitted for scrutiny,
a
separate fee at the rate of 10 per cent of the fee for the first
scrutiny of the drawings shall be payable if the plan
contains
alterations other than those previously suggested.
(vii) Fees for examination of plans of steam pipes. the
fee required under sub-regulation (b) of Regulation 395
shall be
at the rate of Rs. 30.00 per 30 metres (100 ft.) of piping or
part
there of inclusive of all fittings, exceptings fittings like de-
superheaters, steam receivers, feed heaters and separately
fired
superheaters. For any fittings like de-superheaters, steam
receivers and separators, the fee shall be Rs. 150.00 for each
such fittings.
, (viii) Fees for examination of steam pipes :nor grant of
certificates in Form III-A.—A fee shjall be charged as per
Regulation 395 B.
(ix) Fees for testing welders.-For qualification or re-
qualification andtests of operators engaged in repairing
boilers
by welding and welders engaged in welding of boilers and
steam-
pipes under construction, erection and fabrication at site in
accordance with the requirement of Chapter XIII of
regulation, a
fee of Rs. 50.00 for plate welding, Rs. 50.00 for pipe
welding and
Rs. 50.00 for tube welding shall be charged which should
be
accompanied by an application on Form IF.
The candidates or the organization that sends the
candidates for tests shall bear all expenses connected with
the
materials, the finishing and testing of specimens.
(x) Fees for the examination of steam receivers separators etc.
under construction lbr the grant of certificate in Form of the
regulations.—The examination fees to be charged in this case shall
be as Mows :
Rs.
(i) Fora vessel up to 200 mm. (r) diameter 180.00
(ii) Fora vessel more than 200 mm. (8') 280.00
diameter and upto 400 mm.
-
diameter
(Ili) For a vessel over 400 mm. (18") diameter 400.00
The manufacturer, in addition shall supply free of charge the
labour and appliance which may be necessary for such mechanical
tests as are required under the Regulations, Failing to nnd facilities
himself for the prescribed tests, the manufacturer shall bear the cost
of carrying out these tests elsewhere.
(11) Other toes.—For any other matter which in the opinion of
the State Government would involve time and labour as provided for
In section 29 (f) but not prescribed in these rules, the fees shall, be
charged at the discretion of the State GoVernment.
& flee to cover inspection and tests.—A fee paid for the
inspection of a boiler as prescribed under rule 6 shall cover through
examination, hydraulic test and steam test where such are necessary.
Previous and next
Questions people ask
Is rule 7 of THE UTTAR PRADESH BOILER RULES,1969 still in force?
No repeal of the UTTAR PRADESH BOILER RULES,1969 is recorded.