LawGrids logoLAWGRIDS.ORG

Rule 2, The Maharashtra Factories Rules, 1963: Definitions

The Maharashtra Factories Rules, 1963 - Rule 2

Text of rule 2

Definitions

2. Definitions.- In these rules, unless the context otherwise requires,- (a) "Act" means the Factories Act, 1948; (b) "Appendix" means an Appendix appended to these rules; (c) "Artificial Humidification" means the introduction of moisture into the air of a room by any artificial means whatsoever except the unavoidable escape of steam or water vapour into the atmosphere directly due to a manufacturing process: Provided that the introduction of air directly from outside through moistened mats or screens placed in openings at times when the temperature of the room is 80 degrees or more, shall not be deemed to be artificial humidification; (d) "Belt" includes any driving strap or rope; (e) "Degrees" (or temperature) means degrees on the Fahrenheit scale; (f) "District Magistrate" includes such other official as may be appointed by the State Government in that behalf; (g) "Form" means a Form appended to these rules; (h) "Fume" includes gas or vapour; (i) "Health Officer" means the Municipal Health Officer or District Health Officer or such official as may be appointed by the State Government in that behalf; (j) "Hygrometer" means an accurate wet and dry bulk hygrometer conforming to the prescribed conditions as regards constructions and maintenance, (k) "Inspector" means any Inspector appointed under the Act and includes the Chief Inspector of Factories and a District Magistrate; (l) "Maintained" means maintained in an efficient state, in efficient working order and in good repair; (m) "Manager" means the person responsible to the occupier for the working of the factory for the purposes of the Act. (n) "Section" means a section of the Act. 1[(o) “Hazardous Factory” means a factory in which manufacturing process is carried out, involving use, storage, handling or processing of any substance which is flammable, toxic, explosive, highly reactive chemicals as defined in clause (a) of Rule 2 of the Maharashtra Factories (Control of Industrial Major Accident Hazards) Rules, 2003 or `corrosive substance’ as defined in sub-clause (a) of clause (1) of 1 Added by G.N. dt. 28.9.2015 MGG Pt.I-l Ext. P.6. The Maharashtra Factories Rules, 1963 85 Schedule XII prescribed under Rule 114 of the principal Rules or where such substances are evolved in the manufacturing process.] Rules 3 to 11 prescribed under sub-section (1) of section 6 3. Approval of plans - (1) An application for obtaining previous permission for the site on which the 1[hazardous factory] is to be situated and for the construction or extension of a 2[hazardous factory] shall be made to the Chief Inspector of Factories. Application for such permission shall be made in Form I which shall be accompanied by the following documents:- 3[(a) A flow chart of the manufacturing process supplemented by a brief description of the process in its various stages, list of the raw materials used, intermediate products, including emission of toxic gases, etc. finished products, by-products, their quantities, methods of storage and handling, loading and transport and details of the arrangements for the disposal of trade waste and effluents, the likely hazards and the methods to control or eliminate them.] (b) Plans in duplicate drawn to scale showing - (i) the site of the factory and immediate surrounding including adjacent buildings and other structures, roads, drains etc.; (ii) the plan, elevation and necessary cross-section of the various buildings, indicating all relevant details relating to natural lighting, ventilation and means of escape in case of fire. The plans shall also clearly indicate the position of the plant and machinery, aisles and passage ways; and (c) Such other particulars as the Chief Inspector may require: 4[Provided that where any inflammable solvent for the extraction of oil from oil- cakes, oil seeds or any other material is to be or intended to be used, handled or treated in any manner in any process which may be conducted in any factory such application shall also be accompanied by a no objection certificate in respect of the site of the factory from the local authority concerned and any officer not below the rank of Town Planner in Directorate of Town Planning in charge of the area appointed by the State Government in this behalf.] (2) If the Chief Inspector is satisfied that the plans are in consonance with the requirements of the Act, he shall, subject to such conditions as he may specify, approve them by signing and returning to the applicant one copy of each plan or he may call for such other particulars as he may require to enable such approval to be given: 5[Provided that no such approval shall be given in respect of the site of any factory referred to in the proviso to sub-rule (1) unless the Chief Inspector of Factories and the District Magistrate concerned have personally visited the site of the factory and have approved the same, and in case of any difference of opinion among the authorities regarding the location of the plant the matter shall be referred to the State Government for decision: 1 Subs. by . G.N. dt. 28.9.2015 MGG Pt.I-l Ext. P.6. 2 Subs. by . G.N. dt. 28.9.2015 MGG Pt.I-l Ext. P.6. 3 Subs. by G.N. dt. 8.2.1988 M.G.G. Part I-L Ext. P.57. 4 Added by G.N., of 24th May, 1969 5 Added by G.N., of 24th May, 1969 86 The Maharashtra Factories Rules, 1963 Provided further that no place shall be disapproved unless the applicant is given an opportunity to be heard and the Chief Inspector or as the case may be the State Government has recorded its reasons in that behalf.] 1[(3) In case of factory other than hazardous factory,- An application for obtaining permission for the site on which the factory is situated and for the construction or extention of a factory shall be made to the Chief Inspector of Factories. Application for such permission shall be made in Form 1 which shall be accompanied by the following documents:- (a) A flow chart of the manufacturing process supplemented by a brief description of the process in its various stages, list of the raw materials used, intermediate products etc. finished products, by-products, their quantities, methods of storage and handling, loading and transport and details of the arrangements for the disposal of trade waste and effluents, the likely hazards and the methods to control or eliminate them. (b) Plans in duplicate drawn to scale showing:- (i) The site of the factory and immediate surroundings including adjacent buildings and other structures, roads, drains etc.; (ii) The plan, elevation and necessary cross-sections of the various buildings, indicating all relevant details relating to natural lighting, ventilation and means of escape in case of fire. The plans shall also clearly indicate the position of the plant and machinery, aisles and passage ways; and (c) Any other particulars as the Chief Inspector of Factories may require. (4) If the Chief Inspector of Factories is satisfied that the plans are in consonance with the requirements of the Act, he shall, subject to such conditions as he may specify, approve them by signing and returning to the applicant one copy of each plan or he may call for such other particulars as he may be require to enable such approval to be given.] 2[3.-A. Certificate of Stability- (1) No manufacturing process shall be carried out in any premises of a factory constructed, reconstructed or extended or in any premises which has been taken into use as a factory or part of a factory until a certificate of stability issued by a competent person in respect of every work of engineering construction in the Form 1-A has been sent by the Occupier of the factory to the Chief Inspector of Factories, and approved by him: Provided that, for the factories, which are in existence on the date of the notification of these rules, the certificate of stability in Form 1-A, may be sent to the Inspector of Factories within 3 months from the date of notification: Provided further that no manufacturing process shall be carried out in any premises of a factory unless a fresh certificate of stability in Form 1-A is obtained from a competent person once in each period of 5 years or after extension, alteration, repairs or addition of any work of engineering construction or replacement or addition of machinery, plant, etc., and sent to the Chief Inspector: 1 Added by G.N. dt. 28.9.2015 MGG Pt.I-l Ext. P.6. 2 Ins. by G.N., dt. 13.3.1984 published in M.G.G. Pt. I-L (Extra) dt. 19.7.84 P.197 The Maharashtra Factories Rules, 1963 87 Provided also that the foregoing provisions are without prejudice to the provision of sections 39 and 40 of the Factories Act. Explanation (1) - For the purpose of this rule competent person means- (i) A Member or Associate Member of Institute of Civil Engineers; or (ii) A Member of Institute of Structural Engineers; (iii) A Full Member or Associate Member of Institute of Engineers (India), in the branch of Civil Engineering or Structural Engineering; (iv) A Civil Engineer of Public Works, not below the rank of Executive Engineer. Explanation (2) - "Work of Engineering Construction" means "any building, tank silo, seafold, platform, chimney, bridge, supporting structural work retaining wall or any similar structure. 1[3-A(2).-In case of a factory other than hazardous factory, a Certificate of Stability in respect of every work of engineering construction in Form 1-A issued by a Competent Person shall be sent by the Occupier of the factory within twelve months from the issuance of license to the Chief Inspector of Factories and approved by him for the factory constructed, re-constructed or extended or any premises which has been taken into use as a factory or part of the factory.]

Previous and next

All provisions of The Maharashtra Factories Rules, 1963

Questions people ask

Is rule 2 of the Maharashtra Factories Rules, 1963 still in force?

No repeal of the Maharashtra Factories Rules, 1963 is recorded.