LawGrids logoLAWGRIDS.ORG

Rule 127, The Factory rules 1962: Collection and development and dissemination of information

The Factory rules 1962 - Rule 127

Text of rule 127

Collection and development and dissemination of information

[127. Collection and development and dissemination of information. - (1) The occupier of every factory carrying of a 'hazardous process' shall arrange to obtain or develop information in the form of Material Safety Data Sheet (MSDS), in respect of every hazardous substance or material handled in the manufacture, transportation and storage in the factory. It shall be accessible upon request to a worker for reference. (a) Every such Material Safety Data Sheet shall include the following information :- (i) The identity used on the label; (ii) Hazardous ingredients of the substances; (iii) Physical and chemical characteristics of the hazardous substance; (iv) The physical hazards of the hazardous substances, including the potential for fire, explosion and reactivity; (v) The health hazards of the hazardous substances including signs and symptoms of explosure, and any medical conditions which are generally recognized as being aggravated by exposure to the substance; (vi) The primary route(s) of entry; (vii) The permissible limit's of exposure prescribed in the Second Schedule under Section 41-F of the Act, and in respect of a Chemical not covered by the said Schedule, any exposure limit used or recommended by the manufacturer, importer or occupier; (viii) Any generally applicable precautions for safe handling and use of the hazardous substance, which are known, including appropriate hygienic practices, protective measures during repairs and maintenance of contaminated equipment, procedures for clean-up of spills and leaks; (ix) Any generally applicable control measures, such as appropriate engineering, controls, work practices, or use of personal protective equipment; (x) Emergency and first-aid procedures; (xi) The date of preparation of the Material Safety Data Sheet, or the last change to it; and (xii) The name, address and telephone number of the manufacturer, importer, occupier or other responsible party preparing or distributing the Material Safety Data Sheet, who can provide additional information on the hazardous substance and appropriate emergency procedures, if necessary. (b) The occupier while obtaining or developing a Material Safety Data Sheet in respect of a hazardous substance shall ensure that the information recorded accurately reflects the scientific evidence used in making the hazard determination. If he becomes newly aware of any significant information regarding the hazards of a substance, or ways to protect against the hazards, this new information shall be added in the Material Safety Data Sheet as soon as practicable. (c) Presto type example of MIDS is as below : 1 . Chemical Identify Safety Data Sheet Chemical Name Chemical Classification Synonyms Trade Name Formula C.A.S. No. U.N. No. 1 Shipping Name Codes/Label Hazechem No. Regulated identification............................................ Hazardous Waste I.D. No. Hazardous C.A.S. No. Hazardous C.A.S. No. Ingredients Ingredients 1. 2. 3. 4. 2 . Physical and chemical data Boiling Range/Point ºC Physical State Appearance Melting/Freezing Point ºC Vapour Pressure @ 35ºC Odour mm/Hg Vapour Density (Air = 1) Solubility in water @ 30ºC Others Specific Gravity Water=1 PH 3 . Fire and Explosion Hazard Data Flammability Yes/No LEL %Flash Point ºC Autoifnition ºC TDG Flammability UEL %Flash Point ºC Explosion Sensitivity to impact Explosion Sensitivity to State Electricity Hardous combusion Products Hazardous Polymerisation Combusitible Liquid Explosive Material Corrosive Material Flammable Material Oxidiser Others Pyrophoric Material Organic Peroxide 4 . Reactivity Data Chemical Stability Incompatibility with other Material Reactivity Hazardous Reaction Product 5 . Health hazard Data Routes of Entry Effects of Exposure Symptoms Emergency Treatment TLV (ACGIH) Ppm MF/m3 STEL Ppm mg/m Permissible Exposure Limit Lo LD2 Ppm mg/m3 Other Threshold mg/m3 NEPA Hazard Signals Health Flammability Stability Special 6 . Preventive Measures Pennel Protective equipment Handling and storage Precautions 7 . Emergency and First aid measures Fire Fire Extinguishing Fire Special procedures Unusal Hazards Exposure First Aid Measures Antidotes/Dosages Spills Steps to be taken Waste disposal method 8 . Additional Information/References 9 Manufactureer/Suppliers Data . Contract Person in Emergency Name of Firm, Mailing Address Telephone/Telex Nos. Telegraphic Address Local Bodies involved Standard Packing Treatment Details/Ref. Other 10. Disclaimer. - Information contained in this material data sheet in believe to the reliable but no representation. Guarantee or warranties of any kind are made as to its accuracy. Suitability for a particular application or results to be obtained from them. It is upto the manufacturer/seller to ensure that the information contained in the material safety data sheet is relevant to the product manufactured/warranties expressed or implied in respect of the adequacy of this document for any particular purpose. (2) Labelling. - (1) Every container of hazardous substance shall be clearly labelled or marked to identify (a) the contents of the containers; (b) the name and address of the manufacturer or importer of the hazardous substance; (c) the physical and health hazards; and (d) the recommended personal protective equipment needed to work safely with the hazardous substance. (2) In the case container is required to be transport by road outside the factory premises it should in addition be labelled or marked in accordance with the requirements laid down under Rule 128.

Previous and next

All provisions of The Factory rules 1962

Questions people ask

Is rule 127 of the Factory rules 1962 still in force?

No repeal of the Factory rules 1962 is recorded.