Rule 123, The Factory rules 1962: Competent person
The Factory rules 1962 - Rule 123
Text of rule 123
Competent person
[123. Competent person. - (1) The Chief Inspector may recognise any person as
'competent person' within such area and for such period as may be specified for the
purposes of carrying out tests, examinations, inspections and certification for such
buildings, dangerous machinery hoists and lifts, lifting machines and lifting tackles,
pressure plant, confined space, ventilation system and such other process or plant
and equipment as stipulated in the Act and the Rules made thereunder, located in a
factory, if such person possess the qualification, experience and other requirements
as set out in the schedule annexed to this Rule :
Provided that the Chief Inspector may relax the requirements of qualifications in
respect of a 'Competent person' if such a person is exceptionally experienced and
knowledgeable, but not the requirements in respect of the facilities as his command :
Provided further that where it is proposed to recognise a person employed under the
Chief Inspector as a 'competent person', concurrence of the State Government shall
be taken and such a person after being so recognized shall not have powers of an
'Inspector' :
Provided further that the 'competent person' recognized under this provision shall not
be above the age of 62 and shall be physically fit for the purpose of carrying out the
tests, examination and inspection.
(2) The Chief Inspector may recognise an institution of repute, having persons
possessing qualifications and experience as set out in the Schedule annexed to
sub-rule (1) for the purposes of carrying out tests, examinations inspection and
certification for buildings, dangerous machinery, hoists and lifts, lifting machines, and
lifting tackles, pressure plant, confined space, ventilation system and such other
process or plant and equipment as stipulated in the Act and the Rules made
thereunder, as 'competent person' within such area and for such period as may be
specified.
(3) The Chief Inspector on receipt of an application in the prescribed form from a
person or an institution intending to be recognised as a 'competent person' for the
purposes of this Act and the Rules made thereunder shall register such application
and after satisfying himself as regards competence and facilities available at the
disposal of the applicant may recognise the applicant as a 'competent person'. Such
application shall be disposed of either by issuing a certificate of competency in the
prescribed form or by rejecting the same specifying reasons therefor within a period of
60 days.
(4) The Chief Inspector, if he has reason to believe that a 'competent person'-
(a) has violated any condition stipulated in the certificate of competency;
(b) has carried out a test, examination and inspection or has acted in a manner
inconsistent with the intent or the purpose of this Act or the Rules made thereunder, or
has omitted to act as required under the Act or the Rules made thereunder;
(c) has rendered himself unfit for any other reason to be recorded in writing;
may revoke the certificate of competency after giving an opportunity to the 'competent
person' of being heard.
Explanation. - For the purpose of this Rule, an institution includes an organisation.
(5) The Chief Inspector may, for reasons to be recorded in writing, require
recentification of lifting machines, lifting tackles, pressure plant or ventilation system,
as the case may be, which has been certified by a competent person outside the
State.]
Schedule
Sl.
No.
Section or
Rules under
which
competency is
recognised
Qualification
required
Experience for
the purpose
Facilities at his
command
(1) (2) (3) (4) (5)
1.
Rules made
under Section
6 and Section
112 Certificate
of stability for
buildings
Degree in
Civil or
structural
Engineering;
or equivalent
(i) A minimum
of 10 years
experience in
the design or
construction
or testing or
repair of
structure;
(ii) Knowledge
of non
destructive
testing,
various codes
of practices
that are
current and
the effect of
the vibrations
and natural
forces on the
stability of the
building; and
(iii) Ability to
arrive at a
reliable
conclusion
with regard to
the safety of
the structure
or the
building.
2.
Rules made
under Section
21(2)
Degree in
Electrical or
Mechanical
(i) A minimum
of 7 years
experience in
Gauges for
measurement
instruments for
"Dangerous
Machines."
or Textile
Engineering
or equivalent
(a) the design
or operation
or
maintenance;
or (b) the
testing
examination &
inspection of
relevant
machinery,
their guards,
safety devices
and
appliances.
(ii) He shall-
(a) be
conversant
with the safety
devices and
their proper
functioning;
(b) be able to
identify
defects and
any other
cause leading
to the failure;
and
(c) have ability
to arrive at a
reliable
conclusion
with regard to
the safety
device and
appliance and
the machine
guard.
measurement of
speed and any
other equipment
or device to
determine the
safety in use of
the dangerous
machines.
3.
Section
28-Lifts and
A degree in
Electrical
(i) A minimum
experience of
Facilities load
testing, tensile
Hoists. and/or
Mechanical
Engineering
or its
equivalent.
7 years in-
(a) design or
erection or
maintenance,
or
(b) inspection
and test
procedures of
lifts and
hoists.
(ii) He shall
be-
(a) conversant
with relevant
codes of
practices and
test
procedures
that are
current;
(b) conversant
with other
statutory
requirements
covering the
safety of the
Hoists and
Lifts;
(c) able to
identify the
defects and
arrive at a
reliable
conclusion
with regard to
the safety of
the Hoists and
Lifts.
testing guages
equipment/Gadge
t for measurement
and any other
equipment
required for
determining the
safe working
conditions of the
Hoist and Lifts.
4.
Section
29-Lifting
Machinery and
Lifting Tackles
Degree in
Mechanical
or Electrical
or
Metallurgical
Engineering
or its
equivalent.
(i) A minimum
experience of
7 years in-
(a) design or
creation or
maintenance,
or
(b) testing,
examination
and inspection
of lifting
machinery,
chains, ropes
and lifting
tackles.
(ii) He shall
be-
(a) conversant
with the
relevant
codes of
practices and
test procedure
that are
current;
(b) conversant
with fracture
mechanics
and
metallurgy of
the material of
construction;
(c)
Conversant
with heat
treatment/
stress
relieving
Facilities for load
testing, heat
treatment,
equipment/
gadget for
measurement,
guage and such
other equipment
to determine the
safe working
conditions of the
lifting machinery
tackles.
techniques as
applicable to
stress bearing
components
and part of
lifting
machinery
and lifting
tackles;
(d) capable of
identifying
defects and
arriving at a
reliable
conclusion
with regard to
the safety of
the lifting
machinery,
chains, ropes
and lifting
tackles.
5.
Section
31-"Pressure
Plant".
Degree in
chemical or
electrical or
metallurgical
or
Mechanical
Engineering
or its
equivalent
(i) A minimum
experience of
10 years in-
(a) design or
erection or
maintenance,
or
(b) testing
examination
and inspection
for pressure
plants.
(ii) He shall
be-
(a) conversant
with the
relevant
Facilities for
carrying out
hydraulic test
non-destructive
test guages
equipment/gadget
for measurement
and any other
equipment or
guage to
determine the
safety in the use
of pressure
vessels.
codes of
practices and
test procedure
relating to
pressure
vessels;
(b) conversant
with other
statutory
requirements
concerning
the safety of
unfired
pressure
vessels and
equipment
operating
under
pressure;
(c) conversant
with the
nondestructiv
e testing
techniques as
are applicable
to pressure
vessels;
(d) able to
identify the
defects and
arrive at a
reliable
conclusion
with regard to
the safety of
the pressure
plant.
6.
(i) Section
36-Precaution
s against
dangerous
Master's
degree in
Chemistry,
or a degree
(i) A minimum
experience of
7 years in
collection and
Meters,
instruments and
devices duly
calibrate and
fumes.
(ii) Rules
made under
Sections 41
and 112
concerning
ship building
and ship
repairs.
in Chemical
Engineering.
analysis of
environmental
samples and
calibration of
monitoring
equipment;
(ii) He shall-
(a) be
conversant
with the
hazardous
properties of
chemicals and
their
permissible
limit values;
(b) be
conversant
with the
current
techniques of
sampling and
analysis of the
environmental
contaminates;
and
(c) be able to
arrive at a
reliable
conclusion as
regards the
safety in
respect of
entering and
carrying out
hot work.
certified for
carrying out the
tests and
certification of
safety in working
in confined
spaces.
7.
Ventilation
systems as
required under
various
Degree in
Mechanical
or Electrical
Engineering
(i) A minimum
experience of
7 years in the
design,
Facilities for
testing the
ventilation system
instruments and
Schedule
framed under
Section 87,
such as
Schedule on-
(i) Grinding or
glazing of
metals and
processes
incidental
thereto.
(ii) Cleaning or
smoothing,
roughing etc.
of articles by a
jet sand, metal
shot or grit, or
other
abrassive
propelled by a
blast of
compressed
air of steam.
(iii) Handling
and
processing of
asbestos.
(iv)
Manufacture
of Rayon by
Viscose
Process
(v) Foundary
Operations.
or
equivalent.
fabrication,
installation
testing of
ventilation
system and
systems used
for extraction
and collection
of dusts,
fumes and
vapours other
ancillary
equipment.
(ii) He shall be
conversant
with relevant
codes of
practice and
tests
procedures
that are
current in
respect of
ventilation and
extraction
system for
fumes and
shall be able
to arrive at a
reliable
conclusion
with regard to
effectiveness
of the system.
guages for testing
the effectiveness
of the extraction
system for dusts,
vapour and fumes
and any other
equipment
needed for
determining the
efficiency and
adequacy of
these system. He
shall have the
assistance of a
suitable qualified
technical person
who can come to
a reasonable
conclusion as to
the adequacy of
the system.
Previous and next
Questions people ask
Is rule 123 of the Factory rules 1962 still in force?
No repeal of the Factory rules 1962 is recorded.