Rule 62, The Factory rules 1962: Cranes and other lifting machines
The Factory rules 1962 - Rule 62
Text of rule 62
Cranes and other lifting machines
[62. Cranes and other lifting machines. - (1) No lifting machine and no chain, tape
or lifting tackle, except a fibre rope sling, shall be taken into use in any factory for the
first time in that factory unless it has been tested and all parts have been thoroughly
examined by a competent person and a certificate of such test and examination
specifying the safe working load or loads and signed by the person making the test
and the examination, has been obtained and is kept available for inspection.
(2) (a) Every jib-crance so constructed that the safe working load may be varied by
the raising or lowering of the jib, shall have attached thereto either an automatic
indicator of safe working loads or an automatic jib angle indicator and a table
indicating the safe working loads at corresponding inclinations of the jib or
corresponding radii of the load.
(b) A table showing the safe working loads of every kind and size of chain, rope or
lifting tackle in use and in the case of multiple sling. The safe working loads at
different angles of the legs, shall be posted in the store room or place or in which the
chains, ropes or lifting tackles are kept, and in prominent position on the premises and
no rope, chain or lifting tackle not shown in the table shall be used. The foregoing
provisions of this paragraph shall not apply in respect of any lifting tackle if the safe
working load thereof, or, in the case of multiple sling, the safe working load at different
angles of the legs, is plainly marked upon it.
(3) No person under 18 years of age and no person who is not sufficiently competent
and reliable shall be employed as driver of a lifting machine whether driven by
mechanical power or otherwise, or to give signals to driver.]
Indication of safe loads
[63. (1) Particulars of register to be maintained under clause (a) (iii) of sub-section (1)
of Section 29 of the Act shall be :-
(i) Name of Occupier of Factory..................
(ii) Address of the Factory........................
(iii) Distinguishing number or mark, if any, and description sufficient to identify the
lilting machine, chain, rope or the lifting tackle...........
(iv) Date when the lifting machine, chain, rope or lifting tackle was first taken into use
in the factory.........................
(v) Date and number of the certificate relating to any test and examination made
under Rule 62 (1) and 66 together with the name and address of the person who
issued the certificate.........................
(vi) Date of each periodical thorough examination made under clause (a) (iii) of
sub-section (1) of Section 29 of the Act and Rule 65 (2), and by whom it was carried
out.........................
(vii) Date of annealing or other heat treatment of the chain and other lifting tackle
made under Rule 65 (1) and by whom it was carried out...........................
(viii) Particulars of any defect affecting the safe working load found at any such
thorough examination or after appealing and of the steps taken to remedy such
defects..............
(2) The register shall be kept readily available for inspection.]
Previous and next
Questions people ask
Is rule 62 of the Factory rules 1962 still in force?
No repeal of the Factory rules 1962 is recorded.