Rule 20, The Factory rules 1962: Cleanliness of walls and ceilings
The Factory rules 1962 - Rule 20
Text of rule 20
Cleanliness of walls and ceilings
20. Cleanliness of walls and ceilings. - (1) Clause (d) of sub-section (1) of Section
11 of the Act shall not apply to the class or description of factories or part of factories
specified in the Schedule hereto :
Provided that they are kept in a clean state by washing, sweeping, brushing, dusting,
vaccum-cleaning or other effective means :
Provided further that the said clause (d) shall continue to apply-
(i) as respects factories or parts of factories specified in Part A of the said Schedule,
to work-rooms in which the amount of cubic space allowed for every person employed
in the room is less than 500 cubic feet;
(ii) as respects factories or parts of factories specified in Part B of the said Schedule,
to work-rooms in which the amount of cubic space allowed for every person employed
in the room is less than 2,500 cubic feet;
(iii) to engine houses, fitting shops, lunch-rooms, canteens, shelters creches,
clock-rooms, rest rooms and washing places; and
(iv) to such parts of walls, sides and tops of passages and staircase as are less than
20 feet above the floor or stair.
(2) If it appears to the Chief Inspector that any part of a factory to which by virtue of
sub-rule (1) any of the provisions of the said clause (d) do not apply, or apply as
varied by sub-rule (1), is not being kept in a clean state, he may, by written notice,
require that occupier to while wash or colour-wash, wash paint or varnish the same,
and in the event of the occupier failing to comply with such requisition within two
months from the date of the notice, sub-rule (1) shall cease to apply to such part of a
factory, unless the Chief Inspector otherwise determines.
Schedule
Part A
Blast furnaces.
Brick and tile works and pipe works in which unglazed bricks or tiles or stoneware
pipes are made.
Cement works.
Chemical works.
Copper mills.
Gas works.
Iron and steel mills.
Stone, slate and marble works.
The following parts of factories-
Rooms used only for the storage of articles.
Rooms in which the walls or ceilings consist of galvanised iron, glazed bricks, glass,
slate, asbestos, bamboo, thatch.
Parts in which dense steam in continuously evolved in the process.
Parts in which pitch, tar or like material is manufactured or is used to a substantial
extent, except in brush works. The parts of a glass factory known as the glass house.
Rooms in which, graphite is manufactured or is used to a substantial extent in any
process.
Parts in which coal, coke, oxide of iron, ochre, lime, clay or stone is crushed or
ground.
Parts of wall, partitions, ceiling or tops of rooms which are at least 20 feet above the
floor.
Ceilings or tops of rooms in print works, bleach works or dye works with the exception
of finishing rooms or warehouses.
Inside walls of oil mills below a height of 5 feet from the ground floor level.
Inside walls in tanneries below a height of 5 feet from the ground floor where a wet
process is carried on.
Part B
Coach and motor body works.
Electric generating or transforming stations.
Engineering works.
Factories in which sugar is refined or manufactured.
Factories other than foundries in which brass casting is carried on.
Gun factories.
Ship-building works.
Those parts of factories where unpainted or unvarnished wood is manufactured.
Register prescribed under sub-section (1) of Section 11
Previous and next
Questions people ask
Is rule 20 of the Factory rules 1962 still in force?
No repeal of the Factory rules 1962 is recorded.