Rule 3, The Factory rules 1962: Approval of site for hazardous process factory
The Factory rules 1962 - Rule 3
Text of rule 3
Approval of site for hazardous process factory
[3. Approval of site for hazardous process factory. - (1) No site for locating a
factory involving hazardous process or for expending of any such factory shall be
taken into use unless previous approval in writing is obtained from the State
Government.
(2) Application for such approval shall be made in Form 1 to the State Government or
to the site appraisal committee appointed under Section 41-A and in pursuance of the
Rule 125 by them with all relevant informations required in foe form :
Provided that any further information regarding establishment or expansion of the
factory involving hazardous process, if called, by the State Government or any
authority appointed by them, shall also be made by the applicant .
Provided further that no place shall be disapproved unless the applicant is given an
opportunity to be heard and the State Government have recorded its reasons in that
behalf.]
[3A. (1) No building or structure for a factory be constructed, reconstructed, extended
or taken in to use as factory or part of a factory unless previous permission in writing
is obtained from the Chief Inspector. Application for such permission shall be made in
Form 1-A and shall be accompanied by the following documents :
(a) a flow-chart of the manufacturing process to be earned on there, with a brief
description of the process in its various stages.
(b) details of materials, intermediates and finished products to be processed with the
particulars of their harmful effects to be the health of workers and the remedial
measures their quantities and the storage details of each;
(c) details of pressure plants and re-actors to be installed thereat;
(d) plans in triplicate, drawn to scale, showing-
(i) the site of the factory and immediate surrounding including adjacent buildings and
other structures, roads, drains, etc. drawn to a scale not less than 1 cm equal to 500
cms.
(ii) the plan, elevation and necessary cross sectional elevations of the various
buildings and structures including all relevant details relating to natural lighting,
ventilation and means of escape in case of emergency. The plans shall also clearly
indicate the lay-out of the plant and machinery, position of airless and passage-ways,
the latrines and urinals and other sanitary provisions and shall be drawn to a scale not
less than 1 cm equal to 100 cms;
(iii) materials to be used for construction of building and rooting;
(e) particulars of orders and no-objection certificates, if any, issued by other
authorities, in respect of the proposed factory therewith;
(f) particulars in connection with the maximum number of workers to be employed in
each work room, together with the area of ventilating openings and cubic space
available per worker to be employed in each room;
(g) particulars in connection with other requirements of the Act and the rules and the
Schedule thereunder applicable to the proposed factory;
(h) such other particulars as the Chief Inspector may require so as to visualise
situation of the safety of the lives and the environment likely to be effected by the
factory, such as safety reports about the design and the operation of the plant from
any competent person having working experience of not less than 5 years in that line,
mode of disposal of effluents, neutralisation of the toxic substance any, and so forth.
(i) an envelop duly stamped and addressed to the applicant himself, with the address
on which he desires to receive one copy of the plans returned from the office of the
Chief Inspector alongwith the decision of the Chief Inspector as mentioned in sub-rule
(2).
(2) If the Chief Inspector is satisfied that the plans are in consonance with the
requirements he may order for approving the plans subject to such conditions, if any,
as he may specify for fulfilment of the requirements, and for returning one copy of
each plan to the applicant at the address given by him as above in clause (i) of the
sub-rule (i) and to the Inspector of the area respectively seeking compliance of the
terms of approval before the premises so approved is taken into use as a factory or
part of a factory :
Provided that subject to the provisions of sub-section (3) of Section 6 of the Act, the
Chief Inspector may reject the plans of the factory and refuse the permission.
Where Chief Inspector refuses to grant the permission the applicant may within 30
days of the date of such refusal appeal to the State Government.
(3) No manufacturing process shall be carried on in any building constructed,
re-constructed, extended or occupied for using as a factory or part of a factory whose
plans were approved as referred to in sub-rule (2), until certificate of stability in Form 2,
appended to these rules, in respect of those buildings has been delivered to the Chief
Inspector and accepted by him.
(4) The certificate of stability referred to in sub-rule (3) shall be signed by a competent
person.
Note. - Competent person in relation to this sub-rule (4) means a person who has
been recognized competent by the Chief Inspector under the Rule 123.]
Previous and next
Questions people ask
Is rule 3 of the Factory rules 1962 still in force?
No repeal of the Factory rules 1962 is recorded.