Form 9, The Factory rules 1962: [Form 9]
The Factory rules 1962 - Form 9
Text of form 9
[Form 9]
[Form 9]
(Prescribed under Rule 67)
Report of Examination of Pressure Vessel
1. Name of Occupier (of Factory) ...................................
2. Situation and address of Factory ...................................
3.
Name, description and distinctive
number of Pressure vessels
...................................
4.
Name and address of the
Manufacturer
...................................
5. Nature of Process in which it is used ...................................
6. Particulars of vessel ...................................
(a) Date of construction ...................................
(b) Thickness of wall ...................................
(c) Date on which the vessels was first
taken into use
...................................
(d) Safe working pressure
recommended by the manufacturer
...................................
(The history should be briefly given,
and the examiner should state whether
...................................
he has seen the last previous report.)
7.
Date of last hydraulic test (if any), and
pressure applied
...................................
8.
Is the vessel is open or otherwise
exposed to whether or to damp ?
...................................
9. What part (if any), were inaccessible? ...................................
10
.
What examination and tests were
made (Specify pressure if hydraulic
test was carried out.)
...................................
11
.
Condition of vessel (State any External
defects materially affecting the safe
working pressure or the Internal safe
working of the vessel.)
...................................
12
.
Are the required fittings and
appliances provided in accordance
with the rules for pressure vessels ?
...................................
13
.
Are all fittings and appliances properly
maintained and in good condition?
...................................
14
.
Repairs (if any) required, and period
within which they should be executed
and other condition which the person
making examination thinks it
necessary to specify for securing safe
working.
...................................
15
.
Safe working pressure, calculated
from dimension and from the thickness
and other data ascertained by the
present examination, due allowance
being made for conditions of working if
unusual or exceptionally severe (State
minimum thickness of walls measured
during the examination.)
...................................
16
.
Where repairs affecting the safe
working pressure are required state
the working pressure before the
expiration of the period specified in
(14).
...................................
I certify that on ............ the pressure vessel described above was thoroughly cleaned
and so far as its construction permit made accessible for thorough examination and
for such tests as were necessary for thorough examination that on the said date, I
thoroughly examined this pressure vessel, including its fittings, and that the above is a
true report of may examination.
Signature...........................
Qualification.......................
Address.............................
Date...................................
If employed by a Company or Association, give name and address.....................
Previous and next
Questions people ask
Is form 9 of the Factory rules 1962 still in force?
No repeal of the Factory rules 1962 is recorded.