Form FOR REPORTING ELECTRICAL ACCIDENTS, THE INDIAN ELECTRICITY RULES, 1956: FORM FOR REPORTING ELECTRICAL ACCIDENTS
THE INDIAN ELECTRICITY RULES, 1956 - Form FOR REPORTING ELECTRICAL ACCIDENTS
Text of form FOR REPORTING ELECTRICAL ACCIDENTS
FORM FOR REPORTING ELECTRICAL ACCIDENTS
FORM FOR REPORTING ELECTRICAL ACCIDENTS
(See rule 44-A)
1. Subs. by GSR 425, dt. 27.4.1985.
1. Date and time of accident.
2. Place of accident (Village/Town, Tehsil/Thana, District and State).
3. System and voltage of supply, (Whether EHV/HV/LV Line, sub-
station/generating station/consumer’s installations/service lines/other
installations).
4. Designation of the Officer-in-charge of the supplier in whose jurisdiction
the accident occurred.
5. Name of owner/user of energy in whose premises the accident occurred.
6. Details of victim(s): -
(a) Human:
Sl.
No.
Name Father’s Sex of
victim
Full Postal
Address
Approximate
age
Fatal/non-
fatal
1 2 3 4 5 6 7
(b) Animal
Sl.
No.
Discription Number(s) Name(s)
of
Address(es)
of owner(s)
Fatal/non-fatal
owner(s)
7. In case the victim(s) is/are employee(s) of supplier:-
(a) Designation of such person(s).
(b) Brief description of the job undertaken, if any
(c) Whether such person/persons was/were allowed to work on the job.
8. In case the victim(s) is/are employees) of a licensed contractor:-
(a) Did the victim(s) possess any electric workman’s permit(s), supervisor’s
certificate of competency issued under rule 45? If yes give number and date of
issue and the name of issuing authority.
(b) Name and designation of the person who assigned the duties of the
victim(s).
9. In case of accident in the supplier’s system, was the permit to work (PTW)
taken?
10. (a) Describe fully the nature and extent of injuries, e.g.
fatal/disablement (permanent or temporary) of any portion of the body or bums or
other injuries.
(b) In case of fatal accident, was the post mortem performed?
11. Detailed causes leading to the accident.
(To be given in a separate sheet annexed to this form).
12. Action taken regarding first-aid, medical attendance etc. immediately after
the occurrence of the accident (give details).
13. Whether the District Magistrate and Police Station concerned have been
notified of the accident (if so, give details).
14. Steps taken to preserve the evidence in connection with the accident to
extent possible.
15. Name and designations of the person(s) assisting, supervising the
person(s) killed or injured.
16. What safety equipments were given to and used by the person(s) who met
with this accident (e.g. rubber gloves, rubber mats, safety belts and ladders
etc.)?
17. Whether isolating switches and other sectionalising devices were
employed to deaden the sections for working on the same? Whether working
section was earthed at the site of work?
18. Whether the work on the live lines was undertaken by authorised
person(s)? If so, the name and the designation of such person(s) may be given.
19. Whether artificial resuscitation treatment was given to the person(s) who
met with the electric accident? If yes, how long was it continued before its
abandonment?
20. Names and designations of persons present at and witnessed the
accident.
21. Any other information remarks.
Place:……………..
Time:……………..
Date:……………..
Signature ……………..
Name ………………
Designation………………
Address of the person reporting…….
1[ANNEXURE XIV]
[See rate 3(2A)]
GUIDELINES FOR PROVIDING TRAINING AS REQUIRED UNDER
RULE 3(2A)
1. Ins. GSR 461, dt. 9.5.1981 .
1. The owner of every generating station of capacity of 100MW and above
shall arrange for training of personnel, engaged in the operation and
maintenance of his generating station, in the manner specified below: -
(1) (a) The training may be arranged in his own institute or any other
institute established for this purpose.
(b) Any institute where such training is arranged shall have been recognised
by the Central Electricity Authority.
(2) There shall be separate training courses for the persons to be engaged in
operation and maintenance of thermal power stations and hydro power stations
together with associated sub-stations. In respect of thermal stations, separate
course may be arranged for the operating and supervisory staff and other skilled
persons who are to assist them.
(3) Refresher courses shall be arranged periodically for the persons who have
already undergone training under para (2) above and those who have already
sufficient experience in the operation and maintenance of a generating station
and are engaged in its operation and maintenance under clause (b) of sub-rule
2(A) of rule 3 to familiarise with modern practices of operation and maintenance.
2. Duration and content of training shall be as specified below: -
(1) Thermal Power Stations- The duration of the training courses for the
operating supervisory staff (both electrical and mechanical) shall not be less than
12 months. This shall include 186 hours of lectures as specified in Appendix-I to
this Annexure followed by specialised lectures as specified in Appendix-II to this
Annexure for the mechanical and electrical fields. The lectures may be arranged
during the half day and the other half day shall be spent on observation by the
trainees in the power stations to get familiarised with different sections of the
power station- After the lecture course is completed the trainees should be taken
on visits to a few modern power stations and factories manufacturing turbines,
generators, switchgear, instrumentation and auxiliary equipments. The
remaining period will be spent on in-plant training where the candidates will be
given an opportunity to operate or maintain the machinery by themselves under
close supervision of the regular operating staff as well as the training
supervisors. Arrangements shall be made for familiarising the trainees with the
operation of power stations, through simulator facilities.
(2) The duration of the training course for the skilled person to assist the
operators and supervisory staff in a thermal power stations shall not be less than
nine months. This shall include 82 hours of lectures as specified in Appendix-Ill
to this Annexure followed by specialised lectures as specified in Appendix IV.
The lectures may be arranged during the half day and the other half day being
spent on observation by the trainees in the power stations so that they get
familiarized with different sections of the power station. After the later course is
completed; the trainee shall be taken on visits to study a few modern power
stations and factories manufacturing turbines, Generators, switch gear,
instrumentation and auxiliary equipments. The remaining period will be spent on
in-plant training under close supervision.
(3) The duration of the training course for the operation and supervisory staff
to work in hydro power stations shall not be less than nine months. This shall
include 124 hours of lectures as specified in Appendix-V to this Annexure. The
procedure for familiarization visits and in-plant training shall be similar to that
which has been specified in respect of thermal power stations.
(4) Those who are expected to be engaged in the operation and maintenance
of the sub-station associated with the generating station shall be given a training
of duration of not less than six months as specified in Appendix-VI to this
Annexure. This shall be followed by visits and in-plant training.
(5) The duration and contents of the refresher course shall be determined
jointly by the owner of the generating station and the training institute.
3. Qualifications
The minimum qualification for the operating and supervisory staff shall preferably
be a high second class diploma in mechanical or electrical engineering or a
degree from a recognized institute or university The minimum qualifications for
the persons to assist the operating and supervisory staff shall be certificate from
a recognised Industrial Training Institute in appropriate trade.
4. Creation of the Institute
(1) Every training institute shall be established adjacent to a power station so
as to facilitate familiarization and provide in-plant training.
(2) The training institute shall preferably be of residential type and shall have
a full me Principal and adequate number of teaching staff. The training institute
shall have facilities for demonstrations by models, simulators and for exhibition of
slides and movies.
(3) The institute shall have a systematised scheme of evaluation and
assessment of performance of the candidates by conducting oral and written
tests at adequate intervals. The assessment forms shall be specified in
Appendix-VII to this Annexure.
(4) The number of trainees in any one batch shall not normally exceed 25 so
as to maintain a good-teacher-trainees relationship.
(5) The institute shall have facilities to arrange refresher courses for those
personnel have already experience in the operation and maintenance of a
generating station. The staff of the training institute shall be properly qualified
and preferably undergone a specialised training course in the art of imparting
training.
Previous and next
Questions people ask
Is form FOR REPORTING ELECTRICAL ACCIDENTS of THE INDIAN ELECTRICITY RULES, 1956 still in force?
No repeal of the INDIAN ELECTRICITY RULES, 1956 is recorded.