Appendix VI, THE INDIAN ELECTRICITY RULES, 1956: APPENDIX VI
THE INDIAN ELECTRICITY RULES, 1956 - Appendix VI
Text of appendix VI
APPENDIX VI
APPENDIX VI
SYLLABUS FOR OPERATION AND MAINTENANCE STAFF IN
EXTRA-HIGH VOLTAGE SUB-STATION
Item No. Particulars Number
of
Hours
1 2 3
I. Layout and location of 220/132/66/33 K.V sub-station 4
II. Main equipments used together with their specifications 3
III. Construction of high voltage lines, types of towers, types of
insulators and their electrical and mechanical characteristics
3
IV Hightension feeders, their load carrying capacities 1
V (i) Alternating and direct currents, relation between voltage,
current, power, reactive power & common units in use. Power factor,
Ohm’s Law, resistance, reactance, impedance, percentage impedance.
Three phase vectors phase, displacement between current and
voltage
(ii) Basic principle of transformation, magnetisation, hysteresis,
reluctance, retentivity, electromagnets Flux density, ampereturns,
equation for transformation etc.
(iii) Two winding, three winding and auto transformers, grounding
transformers, salient features of shell type and core type transformers,
hot rolled and cold rolled steel cores, Stampings and their assembly
Different vector groups and terminal connections.
(iv) Transformer fixtures e.g. Buchholz relay, on-load and off-load
tap changer, breathers, conservators, bushings of different types,
thermometers, indicators, alarms
(v) Cooling of transformer and oil, different methods of cooling,
importance of oil filtering and drying-out of tranfromers, dielectric
strength of oil, different varieties of filters and their comparison, types
of radiators
(vi) Transformer tests-failures and causes, maintenance and repairs
(vii) Parallel operation, regulation, voltage control, tap, changing,
commissioning test
3
4
4
4
4
3
5
VI. Breakers:
(i) Functions of breakers, their action
(ii) Different types of outdoor and indoor breakers e.g. bulk oil,
minimum oil and air blast, principles and their applications.
(iii) Operating mechanism, manual, spring, hydraulic, pneumatic,
motor 8 (iv) Current rating rupturing capacity, clearance time.
(v) Breaker maintenance, failures and their causes, commissioning
procedure
8
VII. Busbars:
(i) Indoor busbars, their capacity, forces on them during short
circuit, busbar mountings and their clearances
(ii) Strung and tabular type busbars, their current ratings, supports,
jumpers, clearances
(iii) Busbars fittings and connectors
(iv) High Voltage and Extra-high voltage cables, types, their
maintenance and testing
6
VIII. Current and potential transformers:
(i) Types of current and potential tranformers, their working
principles, ratings, accuracies
(ii) Functions of current and potential transformers
(iii) Failures of current and potential transformers, their causes
3
IX. Isolators:
(i) Tilting and rotating isolators, with and without arcing horns,
earthing blades, current ratings, breaking of circuits by isolator,
interlocking with circuit breaker
(ii) Maintenance of isolators
3
X. Lightning arrestors:
(i) Simple description of lightning phenomena and surges
(ii) Construction of lightning arrestors and the principles of their
working
(iii) Different type of lightning arrestors and ratings
(iv) Earthing and location of lightning arrestors
XI. Control Room:
(i) Necessity and function of a control board, types of boards,
instruments on the board
(ii) Functions of the various relays and indicators, Mimic diagram
indicators, annunciator and alarm characteristics of relays, testing and
setting of relays
(iii) Remote control of breakers, isolators, tap changers, indicators
on the control board
(iv) Control and power cables
10
XII. Auxiliary supply:
(i) Current and ampere-hour ratings of batteries, battery charging
equipment, checking of specific gravity of electrolyte, maintenance of
batteries
(ii) Importance of direct current supply and its functions
(iii) Auxiliary direct current supply
3
XIII. Clearance and Compliance of I.E. Rules, 1956:
(i) Minimum clearance for different voltages between phases and
phase to ground
(ii) Indian Electricity Rules pertaining to sub-stations
3
XIV Earthing:
(i) Safety earthing and system earthing, the method of earthing e.g.
solid earthing, resistance earthing, peterson coil earthing, earthing
of lightning arrestor, importance and advantages of each type
(ii) Different types of earth electrodes, earthing mats,
recommended values of earth resistance, measurement of earth
resistances
3
XV Maintenance:
Maintenance of log sheet and other records
The importance of maintenance of good records
3
XVI. Safety:
(i) Safety procedures and procedures for giving line clear and
taking it back, Maintenance of records of line clear
(ii) First-aid, artificial respiration and shock treatment
10
XVII. Interlocking and sequential operation of different equipments 1
XVIII. Synchronising, charging and discharging of high voltage lines.
Live line testing
3
XIX. Calibration and testing of various types of equipments indicating
and measuring equipments, recorders, analysers
4
XX. Handling emergency conditions 3
XXI. Diagnosing troubles in the plant from instruments and
annunciation
3
XXII. Study of carrier system 2
XXIII. Auxiliary equipments such as compressors, Station lighting etc.
1
XXIV Fire fighting equipment-their operation, maintenance and
refilling
1
XXV Personnel managements, duties and responsibilities, labour
welfare and labour laws
4
Total Hours 115
Previous and next
Questions people ask
Is appendix VI of THE INDIAN ELECTRICITY RULES, 1956 still in force?
No repeal of the INDIAN ELECTRICITY RULES, 1956 is recorded.