Rule 21, Punjab Factory Rules 1952: Squeezer of wringer extractor, water mangle, starch mangle, back washer (worsted yarn) crabbing machines and decanting machine
Punjab Factory Rules 1952 - Rule 21
Text of rule 21
Squeezer of wringer extractor, water mangle, starch mangle, back washer (worsted yarn) crabbing machines and decanting machine
21. Squeezer of wringer extractor, water mangle, starch mangle, back
washer (worsted yarn) crabbing machines and decanting machine: - All
in-running rolls shall be guarded with nip guards conforming to the
requirements specified in sub-clause (2) of clause 7.
22 Sanforizing and palmer machine: - (i) Nip guards shall be provided on all
accessible in-running rolls and these shall conform to the requirements specified in
sub-clause (2) of clause 7.
(ii) Access from the sides to the nips of running rolls should be fenced by suitable
side guards.
(iii) A safety trip rod, cable or wire center cord shall be provided across the
front and back of all palmer cylinders extending the length of the face of the
cylinder, which operate readily whether pushed or pulled and the safety trip
shall not be more than 170 cm. above the level at which the operation stands
and shall be readily accessible.
23 Rope washers:- (1) Splash guards shall be installed in all rope
washers unless the machine is so designed as to prevent the water or liquid
from splashing the operator, the floor or working surface.
(2) A safety trip rod, cable or wire centre cord shall be provided across the
front and back of all rope was hers extending the length of the face of the
washer which shall operate readily whether pushed or pulled and the safety
trip shall be not more than 170 cm. above the level on which the operator
stands and shall be readily accessible.
24 Laundry washer tumbler or shaker:
(1) Each drying tumbler, each double cylinder shaker or clothes tumbler,
and each washing machine shall be equipped with an interlocking
arrangement which will prevent the power operation of the inside cylinder
when the outer door on the case or shall is open, and which will also
prevent the outer door in the case or shall from being opened without
shutting off the power and the cylinder coming to a stop but which should
not prevent the movement of the inner-cylinder by means of a hand
operated mechanism or an inching device.
(2) Each closed barrel shall also be equipped with adequate means for
holding open the doors or covers of the inner and outer cylinders, of shells
while it is being loaded or unloaded.
25. Printing machine (roller type) -
(1) All in-running rolls shall be guarded by nip guards conforming to the
requirements specified in sub-clause(2) of clause 7
(2) The engraved roller gears and the large crown wheel shall be guarded.
26. Calendars –The Nip at the in-running side of the rolls shall be provided with a
guard extending across the entire length of the nip and arranged to prevent
the fingers of the workers from being pulled in between the rolls or between
the guard and the rolls, and so contracted that the cloth can be fed into the
rolls safely.
Previous and next
Questions people ask
Is rule 21 of Punjab Factory Rules 1952 still in force?
No repeal of Punjab Factory Rules 1952 is recorded.