Form 8-B, Punjab Factory Rules 1952: FORM No. 8-B
Punjab Factory Rules 1952 - Form 8-B
Text of form 8-B
FORM No. 8-B
FORM No. 8-B
(See rule 67-H)
APPLICATION FOR THE SITE APPRAISAL COMMITTEE
1. Name and address of the applicant.
2. Site Ownership Data:
, Revenue details of the site such a Survey No., Plot No.
Whether the proposed site attracts the provisions of
section 3 of Environments Protection Act, 1986, if so the
nature of the restrictions: and
Local authority under whose jurisdiction the site is
located.
3. Site Plan :
Site plan with clear identification of boundries and total
area proposed to be occupied and showing details
nearby the proposed site
(a) Name of adjoining manufacturing units and human
habits, educational and training institutions, petrol installa-
tions, storages liquified Petroleum Gas and other
hazardous substances, if any, within one kilometer
from the proposed unit.
(b) Water sources (crivers, streams, canal dams,
water filteration plants) in the vicinity.
(c) Nearest hospitals, Fire-stations, Civil Defence
Stations and Police Station and their distances.
(d) Details of high tension electrical transmission lines,
pipe lines for oil, gas
sewerage, if any, passing through the site, and
(e) Location of railway stations, railway lines,
Scheduled road, byepass,, if any near the site.
Plot Plan of the factory, showing entry and, exit points,
roads.
4 Project Report.
A summary of the salient features of Project.
Maximum number of persons like be working in the
factory.
Maximum amount of power and requirements and
source of supply.
Block diagrams of the buildings installations, in the
proposeds and
Details of housing colony, hospital, school and other
infrastructural facilities proposed.
5. Organisation structure of the proposed
manufacturing unit/factory :
Person responsible far protection of safety, health and
environment.
Proposed health and safety policy of the proposed
enterprise.
6. Manufacturing Process Information :
Process flow diagrams.
Brief write up on process and technology.
Critical Process parameters such as pressure build-
up, temperature rise and run-away reaction.
Other external effections critical to the process having
safety implications such as ingrass of moisture or
water, contact with incompatiable substances sudden
power failure ; and
High lights of the built-in-safety/pollution control
devices or measures incorporated in the manufacturing
technology.
7. Information of Hazardous Materials :
Raw materials, intermediates, products and bye-
products and their quantities (enclosed Material Safety
Data Sheet in respect of each hazardous substances).
Main and intermediate storages proposed far raw
material /intermediates/products/Bye Products
(maximum quantities to be stored at any time)
Transportation methods to be used for materials in
flow and out flow, their quantities to be stored at any
time ; and
Safety measures proposed for :
-----handing of materials.
-----internal and external transportation, and
-----disposal (packing and forwarding of finished
products).
8. Information ort Dispersal/Disposal of wastes and
pollutants ;
8.1 Major Pollutants (gas, liquids, solid)their
characteristics and quantities (average and at peak
loads).
Quality. And quantity of solid wastes generated,
methods of their treatment and disposal.
Air, Water and Soil Pollution problems anticipated and
the proposed measures to control .the same,
including treatment and disposal of effluents.
9. Process Hazards Information :
Enclose a copy of the report on environmental impact
assessment.
Enclosed a copy of the report an Risk Assessment
Study : and
Published (open or classified) reports if any, on
accident situation/occupational health hazards or
similar plants (within or outside the country).
10. Information of proposed Safety and Occupational
Health Measure ;
Details of fire fighting facilities and minimum
quantity of water cartaoridi- oxide and other fire
fighting measures needed to meet the emergencies ;
and
Details of in-house medical facilities Proposed.
11. Information on Emergency preparedness :
On Site Emergency Plan : and
Proposed arrangements, if any for mutual aid scheme
with the group of neighbouring factories.
I certify that the information furnished above is
correct to the best of my knowledge and nothing has
been concealed while furnishing it.
Date
Signature
Designation
Previous and next
Questions people ask
Is form 8-B of Punjab Factory Rules 1952 still in force?
No repeal of Punjab Factory Rules 1952 is recorded.