LawGrids logoLAWGRIDS.ORG

Rule 21, Punjab Factories Rules 1952: Squeezer of wringer extractor, water mangle, starch mangle, back washer (worsted yarn) crabbing machines and decanting machine

Punjab Factories Rules 1952 - Rule 21

Text of rule 21

Squeezer of wringer extractor, water mangle, starch mangle, back washer (worsted yarn) crabbing machines and decanting machine

21. Squeezer of wringer extractor, water mangle, starch mangle, back washer (worsted yarn) crabbing machines and decanting machine: - All in-running rolls shall be guarded with nip guards conforming to the requirements specified in sub-clause (2) of clause 7. 22 Sanforizing and palmer machine: - (i) Nip guards shall be provided on all accessible in-running rolls and these shall conform to the requirements specified in sub-clause (2) of clause 7. (ii) Access from the sides to the nips of running rolls should be fenced by suitable side guards. (iii) A safety trip rod, cable or wire center cord shall be provided across the front and back of all palmer cylinders extending the length of the face of the cylinder, which operate readily whether pushed or pulled and the safety trip shall not be more than 170 cm. above the level at which the operation stands and shall be readily accessible. 23 Rope washers:- (1) Splash guards shall be installed in all rope washers unless the machine is so designed as to prevent the water or liquid from splashing the operator, the floor or working surface. (2) A safety trip rod, cable or wire centre cord shall be provided across the front and back of all rope was hers extending the length of the face of the washer which shall operate readily whether pushed or pulled and the safety trip shall be not more than 170 cm. above the level on which the operator stands and shall be readily accessible. 24 Laundry washer tumbler or shaker: (1) Each drying tumbler, each double cylinder shaker or clothes tumbler, and each washing machine shall be equipped with an interlocking arrangement which will prevent the power operation of the inside cylinder when the outer door on the case or shall is open, and which will also prevent the outer door in the case or shall from being opened without shutting off the power and the cylinder coming to a stop but which should not prevent the movement of the inner-cylinder by means of a hand operated mechanism or an inching device. (2) Each closed barrel shall also be equipped with adequate means for holding open the doors or covers of the inner and outer cylinders, of shells while it is being loaded or unloaded. 25. Printing machine (roller type) - (1) All in-running rolls shall be guarded by nip guards conforming to the requirements specified in sub-clause(2) of clause 7 (2) The engraved roller gears and the large crown wheel shall be guarded. 26. Calendars –The Nip at the in-running side of the rolls shall be provided with a guard extending across the entire length of the nip and arranged to prevent the fingers of the workers from being pulled in between the rolls or between the guard and the rolls, and so contracted that the cloth can be fed into the rolls safely.

Previous and next

All provisions of Punjab Factories Rules 1952

Questions people ask

Is rule 21 of Punjab Factories Rules 1952 still in force?

No repeal of Punjab Factories Rules 1952 is recorded.