Rule 1, Punjab Factories Rules 1952: Application
Punjab Factories Rules 1952 - Rule 1
Text of rule 1
Application
1. Application: - This Schedule shall apply to the machinery in factories engaged in
manufacturing or processing of textiles other than jute textiles excluding the machinery in
factories engaged exclusively in the manufacture of synthetic fibres.
2. Definitions;-For the purposes of this Schedule.
(a) “Calender” means a set of heavy roller mounted on vertical side frames and arranged to
pass cloth between them which may have two to ten rollers or bowls some of which may
be heated:
(b) “Card” means a machine consisting of cylinders various sizes and includes flats. covered
with card clothing and set in relation to each so that fibres in ; staple form may be
Separated into individual relationship
(c) “Card clothing” means the material with which the surfaces of the cylinder, Doffer flats,
etc. of a card are covered and consists of a thick foundation material made of either
textile fabrics, through which many fine closely spaced specially bent wires or mounted
saw toothed wires are passed;
(d) “Comber” means a machine for combing fibres of cotton. wool etc. the essential parts
whereof are device for feeding forward a fringe of fibres at regular intervals and an
arrangement of combs or pins, which at the right time, pass through the fringe and by
which tangled fibres. Short fibres, and nips are removed and the long fibres are laid
parallel;
(e) “Combing machinery” means a general classification of machinery, including combers,
silver lap machines. Ribbon lap machines and gill boxes,but excluding cards;
(f) “Continuous bleaching range” means a machine used for bleaching of cloth in rope or
open-width form;
Explanation: (1) The cloth after wetting out, passes through a squeeze roll into a
saturator, containing a solution of caustic soda and then to an enclosed J. Box. A V-
shaped arrangement is attached to the front part of J. Box uniform and rapid saturation of
the cloth, with steam before it is packed down in the J. Box; the cloth, in a single strand
rope form passes over a guide roll down the first arm of the “V” at the upper end of the
second arm so that the cloth is rapidly saturated with steam at this point; the J. Box
capacity is such that cloth wiII remain hot for a sufficient time to complete the scouring
action; it then passes through a series of washers with a squeeze roll in between; the
cloth then passes through a second set of saturator, J-Box and washer, where it is treated
with the peroxide solution;
Explanation :-( 2) by slight modification of the form of the unit, the same process as is
explained in Explanation (1), can be applied to open-width cloth;
(g) “embossing calender” means a calender with two or more rolls, one of which is engaged
for producing figure effects of various kinds on a fabric;
(h) “granett machine” means any number of types of machines for opening hard twisted
waste of wool, cotton, silk, etc., essentially consisting of a locker- in-one or more cylinders
each having a complement worker and stringer rolls, and a fency roll and doffer.
Explanation: - The action of such machines is some what like that of a wool card, but it is
much more severe in that the various rolls are covered with granett wire instead of card
clothing;
(i) “gill box” means a machine used in the worsted system of manufacturing yarns which
functions to arrange it in a parallel order and essentially, it consists of a pair of feed rolls
and a series of follower where the followers move at a faster surface speed and perform
as combine action;
0) “in-running rolls” means any pair of rolls or drums between which there is a ‘nip’;
(k) “Inter-locking arrangement” means a device that prevents the setting in motion of a
dangerous part of a machine or the machine itself while the guard, cover or door provided
to safe- guard against danger is open or un-locked, and which will also hold the guard,
cover or door closed and locked- while the machine or the dangerous part thereof is in
motion;
(I) “Kier” means large metal vat, usually .a pressure type in which fabrics may be boiled out,
bleached etc.
(m) “loom” means a machine for effecting the interlocking of two series of yarns crossing one
another at right angles by which the warp yarns are wound on a warp beam and pass
through headless and reads and the filling is shot across in a shuttle and settled in place
by read and slay, and the fabric is wound on a cloth beam;
(n) “mule” means a type of spinning frame having a head stock and a carriage as its two
main sections, the head stock is stationery and the carriage is movable and its carries the
spindles which draft and spin the roving into yarn and extends over the whole of the
machine, moves slowly toward and away from the head stock during the spinning
operation;
(0) “mercerizing range” means a 3-bowl mangle, a tenter frame, and a number of boxes for
washing and scouring, the whole set up where of is in a straight line and all parts operate
continuously;
Note :-The combination is used to saturate the cloth with sodium hydroxide, stretch it while
saturated and washing out most of the caustic before releasing tension;
(p) ‘Nip” means the danger zone between two rolls or drums, which by virtue of their
positioning and movement create a nipping hazard;
(q) “Openers and pickers” means a general classification of machinery, which includes
breaker pickers, intermediate pickers, finisher pickers, single process pickers, willow
machines, card and picker waste cleaners, thread extractors shredding machines, roving
waste openers, shoddy pickers, bale breakers, feeders, vertical openers, lattice cleaners
horizontal cleaners and any similar machinery equipped with either cylinders, screen
section calender section, rollers or beaters used for the preparation of stock for further
processing;
(r) “paddler” means a trough for a solution and two or more squeeze rolls between which
cloth passes after being passed through a mordent or dye bath;
(s) “Plating machine” means a machine used to lay cloth into folds of regular length for
convenience of subsequent process or use;
(t) “ribbon lapper” means a machine or a part of a machine used to prepare laps for feeding
a cotton comb the purpose of which is to provide a uniform lap in which the fibers have
been straightened as much as possible;
(u) “rotary staple cutter” means a machine consisting of one or more rotary blades used for
the purpose of cutting textile fibres into staple lengths;
(v) “roller printing machine” means a machine used for printing fabrics and consisting of a
large central cylinder, or pressure bowl around the lower part of the perimeter of which is
placed a series of engraved color rollers (each having a color trough), a furnisher roller,
doctor blades, etc.;
(w) “silver lapper” means a machine or a part of a machine in which a number of parallel card
silvers are drafted slightly, laid side bye side in a compact sheet and wound into a
cylindrical package;
(x) “starch mangle” means a mangle which is use specifically for starching cotton goods, and
generally consists of two large rolls and a shallow open vat with several immersion rolls;
(y) “sanforizing machine” means a machine consisting of a large steam-heated cylinder and
endless, thick woollen felt blanket which is in close contact with the cylinder for most of its
perimeter and an electrically heated shoe which presses the cloth against the blanket
while the later is in a stretched condition as it curves around feed-in roll;
(z) “shearing machine” means a machine used for shearing cloth in which cutting action is
provided by a number of steel blades spirally mounted on a roller which rotates in close
contact with a fixed edge blade.
(aa) “singeing machine” means a machine which comprises of a heated roller a plate, or an
open gas flame by which the cloth or yarn is rapidly passed over the roller or the plate or
through the open gas flame to remove fuzz of hairiness by burning;
(ab) “slasher” means a machine used for applying a size mixture to warp yarns which
essentially consists of a stand for holding section beams a size box, one or more
cylindrical dryers or an enclosed hot air dryer, and a beaming end for winding the yarn on
the loom beams;
(ac) “tenter frame” means a machine for drying cloth under tension which essentially consists
of a pair of endless traveling chains fitted with clips of fine pins and carried on tracks and
the cloth is firmly held at the selvages by the two chains which diverge as they move
forward so that the cloth is brought to the desired width;
(ad) “warper” means a machine for preparing and arranging the yarn intended for the warp of
fabric, specifically a beam warper; and
(ae) “Water mangle” means a calender having two or more rolls used for squeezing water form
fabrics before drying or for the finishing of various fabrics.
3. General safety requirements;-
(1) Every textile machine shall be provided with individual mechanical or electrical means for
starting and stopping such machines and the belt shifter on machines driven by belts and
shafting should be provided with a belt shifter lock or an equivalent positive locking
device.
(2) Stopping and starting handles or other controls shall be of such design and so
positioned as to prevent the operator’s hand or fingers from striking against any moving
part or any other part of the machine.
(3) All belts, pulleys, gears, chains, sprockets wheel and other dangerous moving parts of
machinery which either form part of the machinery or are used in association with it, shall
be securely guarded.
4. Openers and pickers ;-( 1) In all operating or picker machinery;-
(i) Beaters and other dangerous parts shall be securely fenced by guards so as to prevent
contact with them; and
(ii) Guards and doors or covers of openings giving access to any dangerous part of the
machinery shall be provided with inter-locking arrangement:
Provided that in the case of doors or covers of openings giving access to any dangerous
part, other than beater covers, instead of the inter, locking arrangement. such openings
may be so fenced by guards which prevent access to any such dangerous part and which
is either kept positively locked in position or fixed in such a manner that it cannot be
removed without the use of hand tools.
(2) The feed rolls on all opening and picking machinery shall be covered with a guard
designed to prevent the Operator from reaching the nip while the machinery is in
operation.
(3) The lap forming rollers shall be fitted with a guard or cover which shall prevent access to
the nip at the intake of the lap roller and fluted roller as long as the weighted rack is down
and the guard or cover shall be so locked that it cannot be raised until the machine is
stopped, and machine cannot be started until the Cover of guard is closed:
Provided that the foregoing provision shall not apply to the machines equipped with
automatic lap forming devices:
Provided further that any such machine equipped with automatic lap forming device shall
not be used unless the automatic lap forming device is in efficient working order.
Previous and next
Questions people ask
Is rule 1 of Punjab Factories Rules 1952 still in force?
No repeal of Punjab Factories Rules 1952 is recorded.