Form 24, Punjab Factories Rules 1952: Form No.24
Punjab Factories Rules 1952 - Form 24
Text of form 24
Form No.24
Form No.24
(Prescribed under Rule 102)
1 Description of system
2 Hood
(a) Serial No. of Hood.
(b) Contaminant captured.
(c) Capture velocities (at points to be specified).
(d) Volume exhausted at Hood.
(e) Hood static pressure Design Actual Value
3 Total pressure drop at
(a) Joints
(b) Other points of system (to be specified)
4 Transport Velocity in Duct
(at points alone dust to be specified)
5 Air cleaning Device.
(a) Type used.
(b) Velocity at inlet.
(c) Static Pressure at inlet.
(d) Velocity at outlet.
(e) State Pressure at outlet.
6 Fan.
(a) Type used.
(b) Volume handled.
(c) Static pressure.
(d) Pressure drop at outlet of fan.
7 Fan Motor. (a) Type
(b) Speed and horse Power.
8 Particulars of defects, if any, disclosed during test in any of the above components.
I certify that on this............day of ............the above dust extraction system was thoroughly
cleaned and (so far as its construction permits) made accessible for thorough examination. I
further certify that on the said date, I thoroughly examined the above dust extraction system
including its components and that the above is a true report of my examination.
Signature ............
Qualification...........
Address ...............
Date ...............
If employed by a Company or Association give name and address.
Previous and next
Questions people ask
Is form 24 of Punjab Factories Rules 1952 still in force?
No repeal of Punjab Factories Rules 1952 is recorded.