LawGrids logoLAWGRIDS.ORG

Rule 128, Uttar Pradesh Factory Rules, 1950: Plantation of Trees

Uttar Pradesh Factory Rules, 1950 - Rule 128

Text of rule 128

Plantation of Trees

[128. Plantation of Trees.—The occupier of a factory, employing ordinarily 100 or more workers, shall plant and maintain trees within the precincts of the factory. The number, type and layout of the trees to be planted shall be got approved by the Forest Officer of the area or any other qualified Horticulturist.] SCHEDULE I Manufacture of Aerated Waters and Processes Incidental thereto 1. Fencing of machines.—All machines for filling bottles or syphons shall be so constructed, placed or fenced as to prevent, as far as may be practicable, a fragment of a bursting bottle or syphon from striking any person employed in the factory. 2. Face-guards and gauntlets.—(1) The occupier shall provide and maintain in good condition for the use of all persons engaged in filling bottles or syphons— (a) suitable face-guards to protect the face, neck and throat, and (b) suitable gauntlets for both arms to protect the whole-hand and arms: Provided that— (i) Paragraph 2(1) shall not apply where bottles are filled by means of an automatic machine so constructed that no fragment of a bursting bottle can escape, and (ii) where a machine is so constructed that only one arm of the bottler at work upon it is exposed to danger, a gauntlet need not be provided for the arm, which is not exposed to danger. (2) The occupier shall provide and maintain in good condition for the use of all persons engaged in corking, crowning, screwing, wiring, foiling, capsuling, sighting or labelling bottles or syphons : (a) suitable face-guards to protect the face, neek and throat, and (b) suitable gaundets for both arms to protect the arm and at least half of the palm and the space between the thumb and forefinger. 3. Wearing of face-guards and gauntlets.—All persons engaged in any of the processes specified in paragraph 2 shall while at work in such processes, wear the face-guards and gauntlets provided under the provisions of the said paragraph. SCHEDULE II Electrolytic Plating or Oxidation of Metal Articles by use of an Electrolyte containing Chromic Acid or other Chromium Compounds 1. Definition.—For the purposes of this schedule— (a) "Electrolytic chromium process" means the electrolytic plating or oxidation of metal articles by the use of an electrolyte containing chromic acid or other chromium compounds. (b) "Bath" means by vessel used for an electrolytic chromium process or for any subsequent process. (c) "Employed" means in paragraphs 5, 7, 8 and 9 of this schedule, employed in any process involving contact with liquid from a bath. (d) "Suspension" means suspension from employment in any process involving contact with liquid from any bath by written certificate in the health register, signed by the Certifying Surgeon, who shall have power of suspension as regards all persons employed in any such process. 2. Exhaust draught.—An efficient exhaust draught shall be applied to every vessel in which an electrolytic chromium process is carried on. Such draught shall be provided by mechanical means and shall operate on the vapour or spray given off in the process as near as may be at the point of origin. The exhaust draught appliance shall be so constructed, arranged and maintained as to prevent the vapour or spray entering into any room or place in which work is carried on. 3. Prohibition relating to young Persons-No young person shall be employed or permitted to work at a bath.9 3A-CONDITION OF EMPLOYMENT OF WOMEN- Women workers may be employed or permitted to work at a bath with their consent to work subject to the following conditions:- (1) International Safety standards shall be adopted by the occupier for providing Occupational Safety and Health (OSH). (2) The occupier shall, as far as possible, modemise the above processes/places from time to time and will use modern equipments. (3) Pregnant and breast feeding women shall not be employed or permitted to work at a bath. 4. Floor of workrooms.—The floor or every room containing a bath shall be impervious to water. The floor shall be maintained in good and level condition and shall be washed down at least once a day. 5. Protective clothing.—(1) The occupier of the factory shall provide and maintain in good and clean condition the following articles of protective clothing for the use of all persons employed on any process at which they are liable to come in contact with liquid from a bath and such clothing shall be worn by the persons concerned : (a) Water-proof aprons and bibs, and (b) for persons actually working at a bath, loose fitting rubber gloves and rubber boots or other water-proof foot wear. (2) The occupier shall provide and maintain for the use of all persons employed, suitable accommodation for the storage and adequate arrangements for the drying of the protective clothing. 6. Medical requisites.—The occupier shall provide and maintain a sufficient supply of suitable ointment and impermeable water-proof plaster in a separate box readily accessible to the workers and used solely for the purposes of keeping the ointment and plaster. 9 Provisions of clause (3) of Article 348 of the Constitution of India, the Governor is pleased to order the publication of the following English translation of notification no. 963/XXXV1-03-2025-1792147, dated July 4, 2025 7. Medical examination.—(a) Every person employed shall be examined by the Certifying Surgeon once in every 14 days and such examination shall take place at the factory. (b) A health register in the prescribed Form No. 17 shall be kept by the occupier of the factory and in it shall be entered the names of all persons employed together with such entries as the Certifying Surgeon may make from time to time. (c) No person after suspension shall be employed without written sanction from the Certifying Surgeon entered in or attached to the health register. 8. Cautionary placard.—A cautionary placard in the form specified by the Chief Inspector and printed in the language of the majority of the workers employed shall be affixed in a prominent place in the factory where ii can be easily and conveniently read by the workers. 9. Weekly examination..—A responsible person appointed in writing by of the factory shall twice in every week inspect the hands forearms of the persons employed and shall keep a record of such inspections in the health register. SCHEDULE III Manufacture and Repairs of Electric Accumulators 1. Savings.—This schedule shall not apply to the manufacture or repair of electric accumulators or parts thereof not containing lead or any compound of lead ; or to the repair on the premises, of any accumulator forming part of a stationary battery. 2. Definitions.—For the purposes of this schedule— (a) "Lead Process" means the melting of lead or any material containing lead, casting, pasting, lead burning, or any other work, including tribbing, or any other abrading or cutting of pasted plates, involving the use, movement or manipulation of, or contact with any oxide of lead. (b) "Manipulation of raw oxide of lead" means any lead process involving any manipulation or movement of raw oxides of lead other than its conveyance in a receptacle or by means of an implement from one operation to another. (c) "Suspension" means suspension from employment in any lead process by written certificates in the Health Register (Form No. 17) signed by the Certifying Surgeon, who shall have power of suspension as regards all persons employed in any such process. 3. Prohibition relating to young persons-No young person shall be employed or permitted to work in the any lead process or in any room in to which the manipulation of raw oxide of lead or pasting is carried on10. 3A-CONDITION OF EMPLOYMENT OF WOMEN-Women workers may be employed or permitted to work in any lead process or in any room in which the manipulation of raw oxide of lead or pasting is carried on with their consent to work subject conditions:-to the following (1) International Safety standards shall be adopted by the occupier for providing Occupational Safety and Health (OSH). (2) The occupier shall, as far as possible, modernise the above processes/places from time to time and will use modern equipments. (3) Pregnant and breast feeding women shall not be employed or permitted to work at a bath. 4. Separation of certain processes.—Each of the following processes shall be carried on in such a manner and under such conditions as to secure effectual separation from one another, and from any other process : (a) manipulation of raw oxide of lead ; (b) pasting; (c) drying of pasted plates ; (d) formation with lead burning ("tacking") necessarily carried on in connection therewith ; (e) melting down of pasted plates, 5. Air space.—In every room in which a lead process is carried on, there shall be at least 500 cubic feet of air space for each person employed therein, and in computing this air space no height over 12 feet shall be taken into account. 6. Ventilation.—Every work-room shall be provided with inlets and 10 Provisions of clause (3) of Article 348 of the Constitution of India, the Governor is pleased to order the publication of the following English translation of notification no. 963/XXXV1-03-2025-1792147, dated July 4, 2025 outlets of adequate size so as to secure and maintain efficient ventilation to all parts of the room. 7. Distance between workers in pasting room.—In every pasting room the distance between the centre of the working position of any paster and that of the paster working nearest to him shall not be less than five feet. 8. Floor of work-rooms.—The floor of every room in which a lead process is carried on shall be— (a) of cement or similar material so as to be smooth and impervious to water; (b) maintained in sound conditions ; (c) kept free from materials, plant or other obstruction not required for, or produced in, the process carried on in the room. (2) In all such rooms other than grid casting shops the floor shall be cleaned daily after being thoroughly sprayed with water at a time when other work is being carried on in the room. (3) In grid casting shops the floor shall be cleansed daily. (4) Without prejudice to the requirements of sub-paragraphs (1), (2) and (3), where manipulation of raw oxide of lead of pasting is carried on the floor shall also be— (a) kept constantly moist while work is being done; (b) provided with suitable and adequate arrangements for drainage; (c) thoroughly washed daily by means of a hose pipe. 9. Work benches.—The work benches at which any lead process is carried on shall— (a) have a smooth surface and be maintained in sound condition; (b) be kept free from all materials or plant not required for, or produced in, the process carried on thereat; and, all such work-benches other than those in grid casting shops shall— (c) be cleansed daily either after being thoroughly damped or by means of a suction cleaning apparatus, at a time when no other work is being carried on thereat; and, all such work-benches in grid casting shops, shall— (d) be cleansed daily; and every work-bench used for pasting shall— (e) be covered throughout with sheet lead or other impervious material; (f) be provided with raised edges ; (g) be kept constantly moist while pasting is being carried on. 10. Exhaust draught.—The following process shall not be carried on without the use of an efficient, exhaust draught: (a) Melting of lead or materials containing lead ; (b) Manipulation of raw oxide of lead, unless done in an enclosed apparatus so as to prevent the escape of dust into the workroom ; (c) Pasting; (d) Trimming, brushing, filing or any other abrading or cutting of pastered plates giving rise to dust; (e) Lead burning, other than— (i) "tacking" in the formation room ; (ii) chemical burning for the making of lead linings for cell cases necessarily carried on in such a manner that the application of efficient exhaust is impracticable. Such exhaust draught shall be effected by mechanical means and shall operate on the dust of fume given off as nearly as may be at its point of origin, so as to prevent it entering the air of any room in which persons work. 11. Fumes and Gases from melting pots.—The products of combustion produced in the heating of any melting pot shall not be allowed to escape into a room in which persons work. 12. Container of dross.—A suitable receptacle with tightly fitting cover shall be provided and used for dross as it is removed from every melting pot. Such receptacle shall be kept covered while in the work-room except when dross is being deposited therein. 13. Container for lead waste.—A suitable receptacle shall be provided in every work-room in which old plates and waste material, which may give rise to dust shall be deposited. 14. Racks and shelves in drying room.—The racks or shelves provided in any drying room shall not be more than 8 feet from the floor nor more than 2 feet in width; provided that as regards racks or shelves set or drawn from both sides, the total width shall not exceed 4 feet. Such racks or shelves shall be cleansed only after being thoroughly damped unless an efficient suction cleaning apparatus is used for the purpose. 15. Medical examination.—(a) Every person employed in a lead process shall be examined by the Certifying Surgeon within seven days preceding or following the date of his first employment in such process and thereafter shall be examined by the Certifying Surgeon once in every calendar month, or at such other intervals as may be specified in writing by the Chief Inspector on a day of which due notice shall be given to all concerned. "First employment" means first employment in a lead process in the factory or workshop and also re-employment therein in a lead process following any cessation of employment in such process for a period exceeding three calendar months. (b) A health register in Form No. 17, containing the names of all persons employed in lead process shall be kept. (c) No person after suspension shall be employed in a lead process without written sanction from the Certifying Surgeon entered in or attached to the health register. 16. Protective clothing.—Protective clothing shall be provided and maintained in good repair for all persons employed in— (a) manipulation of raw oxide of lead ; (b) pasting ; (c) the formation room ; and such clothing shall be worn by the persons concerned. The protective clothing shall consist of a water-proof apron and water-proof footwear; and, also, as regards persons employed in the manipulation of raw oxide- of lead or in pasting, head covering. The head coverings shall be washed daily. 17. Mess-room.—There shall be provided and maintained for the use of all persons employed in a lead process and remaining on die premises during the meal intervals, a suitable mess-room, which shall be furnished with (a) sufficient tables and benches, and (b) adequate means for warming food. The mess-room shall be provided under die charge of a responsible person, and shall be kept clean. 18. Cloak-room.—There shall be provided and maintained for the use of all persons employed in a lead process— (a) a cloak-room for clothing put off during working hours with adequate arrangements for drying the clothing, if wet. Such accommodation shall be separate from any mess-room; (b) separate and suitable arrangements for the storage of protective clothing provided under paragraph 16. 19. Washing facilities.—There shall be provided and maintained in a cleanly state and in good repair for the use of all persons employed in a lead process: (a) A wash place under cover, with either— (i) a trough with a smooth impervious surface fitted with a waste pipe, without plug, and of sufficient length to allow of at least two feet for every such five persons employed at any one time, and having a constant supply of water from taps or jets above the trough at intervals of not more than 2 feet; or (ii) at least one wash basin for every five such persons employed at any one time, fitted with a waste pipe and plug and having a constant supply of water laid on . (iii) a sufficient supply of clean towels made of suitable materials renewed daily which supply, in die case of pasters and persons employed in die manipulation of raw oxide of lead, shall include a separate marked towel for each such worker; and (iv) a sufficient supply of soap or other suitable cleansing material and of nail brushes. (b) There shall in addition be provided means of washing in close proximity to die rooms in which manipulation of raw oxide of lead or pasting is carried on if required by notice in writing from the Chief Inspector. 20. Time to be allowed for washing.—Before each meal and before the end of the days, work at least ten minutes, in addition to the regular meal times, shall be allowed for washing to each person, who has been employed in the manipulation of raw oxide of lead or in pasting Provided that if there be one basin or two feet of bough for each sue.-person this "ale shall not apply. 21. Facilities for bathing.—Sufficient bath accommodation to the satisfaction of the Chief Inspector shall be provided for all persons engaged in the manipulation of raw oxide of lead or in pasting, and a sufficient supply of soap and clean towels. 22. Food, drink, etc. prohibited in work-room.—No food, drink, pan and supari or tobacco shall be consumed or brought by any worker into any workroom in which any lead process is carried on. SCHEDULE IV Glass Manufacture 1. Exemption.—If the Chief Inspector is satisfied in respect of any factory or any class of process that, owing to the special methods of work or the special conditions in a factory or otherwise, any of the requirements of this schedule can be suspended or relaxed without danger to the persons employed therein, or that the application of this schedule or any part thereof is for any reason impracticable, he may by a certificate in writing authorise such suspension or relaxation as may be indicated in the certificate for such period and on such conditions as he may think fit. 2. Definitions—For the purposes of this schedule— (a) "Efficient exhaust draught'" means localized ventilation effected by mechanical means, for the removal of gas, vapour, dust or fumes so as to prevent them (as far as practicable under the atmospheric conditions usually prevailing) from escaping into the air of any place in which work is carried on. No draught shall be deemed efficient which fails to remove smoke generated at the point where such gas, vapour, fume, or dust originate. (b) "Lead compound''' means any compound of lead other than galena, which, when treated in the manner described below, yields to an aqueous solution of hydrochloric acid a quantity of soluble lead compound exceeding, when calculated as lead monoxide, five per cent of the dry weight of the portion taken for analysis. The method of treatment shall be as follows : A weighed quantity of the material, which has been dried at 100°C. and thoroughly mixed shall be continuously shaken for one hour, at the common temperature with 1,000 times its weight of an aqueous solution of hydrochloric acid containing 0.25 per cent by weight of hydrogen chloride. This solution shall thereafter be allowed to stand for one hour and then filtered. The lead salt contained in the clear filterate shall then be precipitated as lead sulphide and weighed as lead sulphate. (c) "Suspension" means suspension from employment in any process specified in paragraph 3 by written certificate in the Health Register Form No. 17 signed by the Certifying Surgeon, who shall have power of suspension as regards all persons employed in any such process. 3. Exhaust draught.—The following processes shall not be carried on except under an efficient exhaust draught or under such other conditions as may be approved by the Chief Inspector : (a) The mixing of raw materials to form a "batch". (b) The dry grinding, glazing and polishing of glass or any article of glass. (c) All process in which hydrofluoric acid fumes or ammonicle vapours are given off. (d) All processes in the making of furnace mould or "pots" including the grinding or crushing of used "pots". (e) All processes involving the use of a dry lead compound. 4. Prohibition relating to young persons-No young person shall be employed or permitted to work in any of the operations specified in paragraph 3 and on glass blowing or at any place where such operations are carried on.11 4A-CONDITION OF EMPLOYMENT OF WOMEN-Women workers may be employed or permitted to work in any of the operations specified in paragraph 3 and on glass blowing or at any place where such operations are carried on with their consent to work subject to the following conditions:- (1) International Safety standards shall be adopted by the occupier for providing Occupational Safety and Health (OSH). (2) The occupier shall, as far as possible, modernise the above processes/places from time to time and will use modern equipments. (3) Pregnant and breast feeding women shall not be employed on permitted to work at a bath. 5. Floors and work-benches.—The floor and work-benches of every room in which a dry compound of lead is manipulated or in which any process is carried on giving off silica dust shall be kept moist and shall comply with the following requirements: (a) the floors shall be— (i) of cement or similar material so as to be smooth and impervious to water; (ii) maintained in sound conditions; and (iii) cleansed daily after being thoroughly sprayed with water at a time when no other work is being carried on in the room. (b) The work-benches shall— (i) have a smooth surface and be maintained in sound condition, and (ii) be cleansed daily either after being thoroughly damped by means of a suction cleaning apparatus at a time when no other work is being carried on thereat. 11 Provisions of clause (3) of Article 348 of the Constitution of India, the Governor is pleased to order the publication of the following English translation of notification no. 963/XXXV1-03-2025-1792147, dated July 4, 2025 6. Use of Hydrofluoric Acid.—The following provisions shall apply to rooms in which glass is treated with hydrofluoric acid— (a) there shall be inlets and outlets of adequate size so as to secure and maintain efficient ventilation in all parts of the room; (b) the floor shall be covered with guttaparcha and be tight and shall slope gently down to a covered drain; (c) the work places shall be so enclosed in projecting hoods tiiat openings required for bringing in the objects to be treated shall be as small as practicable; and (d) the efficient exhaust draught shall be so contrived that the gases are exhausted downwards. 7. Storage and transport of Hydrofluoric Acid.—Hydrofluoric acid shall not be stored or transported except in cylinders or reception made of lead or rubber.

Previous and next

All provisions of Uttar Pradesh Factory Rules, 1950

Questions people ask

Is rule 128 of Uttar Pradesh Factory Rules, 1950 still in force?

No repeal of Uttar Pradesh Factory Rules, 1950 is recorded.