LawGrids logoLAWGRIDS.ORG

Rule 2, Uttar Pradesh Factory Rules, 1950: Definitions

Uttar Pradesh Factory Rules, 1950 - Rule 2

Text of rule 2

Definitions

1[2. Definitions.—In these rules unless there is anything repugnant in the subject or context:— (a) 'Act' means the Factories Act, 1948. (b) 'artificial humidification' means the introduction of moisture into the air of a room by any artificial means whatsoever except the unavoidable escape of steam or water vapour into the atmosphere directly due to a manufacturing process : Provided that the 'introduction of air directly from outside through moistened mats or screens placed in opening at times when the temperature of thee room is 80 degrees or more, shall not be deemed to he artificial humidification. (c) 'belt includes any driving strap or rope. (cc) 'Board' means the State Effluent Board constituted under sub-rule (2) of Rule 18 of these Rules. (d) 'degree' (of temperature) means degrees on the Fahrenheit scale. (e) 'Fume' includes gas or vapour. 1 Subs by Notifi No. 607(V)/XXXXVI-78--2045(F)-74, dt 16.2.1978 (f) 'Health Officer' means the Municipal Medical Officer of Health, Nagar Swasthya Adhikari, Deputy Chief Medical Officer of Health, Additional Medical Officer of Health, Assistant Medical Officer of Health or such other Officer as may be appointed by the State Government in this behalf. (g) 'hygrometer' means an accurate wet and dry-bulb hygrometer conforming to the prescribed condition as regards constructions and maintenance. (h) 'inspector' means an officer appointed under Section 8 of the Act and includes "Chief Inspector" and "Deputy Chief Inspector". (i) 'Manager' means a person nominated or appointed as such by the occupier of the factory under Section 7 for the purposes of the Act. (j) 'maintained' means maintained in an efficient state, in efficient working order and in good repair. (k) 'workroom' means any place occupied by workers engaged in any manufacturing process, with or without the aid of power. (l) 'Qualified Nurse' means a person who possesses a qualification in nursing recognized under the Indian Nursing Council Act, 1947, and who is registered with the U. P. Nurses and Mid wives Council, or a similar registered body of any other State in India.] 2 [2-A. Competent person.-(1) The Chief Inspector may recognise any person as 'competent person' within such area and for such period as may be specified for the purposes of carrying out tests, examinations and inspections for such buildings, dangerous machinery, hoists and lifts, lifting machines and lifting tackles, pressure plant, confined space, ventilation system and such other process or plant and equipment as stipulated in the Act and the Rules made thereunder, located in a factory, if such a person possesses the qualifications experience and other requirements as set out in the schedule annexed to this rule: Provided that the Chief Inspector may relax the requirements of qualifi-cations in respect of a 'competent person', if such a person is exceptionally experienced and knowledgeable, but not the requirements in respect of the facilities at his command: Provided further that where it is proposed to recognise a person employed under the Chief Inspector as a 'competent person' concurrence of the State Government shall be taken: Provided also that the 'competent person' recognised under this provision shall not be above the age of 62 years and shall be physically fit for the purpose of carrying out the tests, examinations and inspections. 2 Ins. by Noti. No. 3417/XXXVI-3-1(F)-88, dt. 6.10.1999 (w.e.f. 6.10.1999). (2) The Chief Inspector may recognise an institution of repute, having persons possessing qualifications and experience as set out in the Schedule annexed to sub-rule (1) for the purpose of carrying out tests, examinations and inspections for buildings, dangerous machinery, hoists and lifts, lifting machines and lifting tackles, pressure plant, confined space, ventilation system and such other process or plant and equipment as are stipulated in the Act and the Rules made thereunder, as a competent person, within such area and for such period as may be specified. (3) The Chief Inspector may on receipt of an application in the prescribed form, from a person or an institution intending to be recognised as a 'competent person' for the purposes of the Act and the Rules made thereunder, register such application and within a period of sixty days of the date of receipt of application, reject the application for reasons to be recorded in writing or if satisfied about the competence and facilities available at the disposal of the applicant, recognise the applicant as a 'competent person' and issue a certificate of competency in the prescribed form. (4) The Chief Inspector may, after giving an opportunity of being heard to the person recognised as a 'competent person' revoke the certificate issued to him under sub-rule (3)- (1) if he has reason to believe that the competent person: (a) has violated any of the conditions stipulated in the certificate; (b). has carried out a test, examination and inspection or has otherwise acted in a manner inconsistent with the intent or the purpose of the Act or the Rules made thereunder; or (c) has omitted to act as required under the Act and the Rules made thereunder; or (ii) for any other reason to be recorded in writing. Explanation. For the purpose of this rule, an institution includes an organisation. (5) The Chief Inspector may, for reasons to be recorded in writing, require recertification of lifting machines, lifting tackles, pressure plant or ventilation system, as the case may be which has been certified by a competent person outside the State. FORM OF APPLICATION OF GRANT OF CERTIFICATE OF COMPETENCY TO A PERSON UNDER SUB-RULE (3) OF RULE-2-A 1- Name : 2- Date of Birth : 3- Name of organization (if not-self employed) : 4- Designation : 5- Education qualifications (copies of testimonials to be attached) : 6- Details of professions experience (in chronological under) : Name of organization Period of service Designation Area of responsibility 7- Membership, if any, or professional bodies : 8- (i) Details of facilities (examination, testing etc) at his disposal : (ii) Arrangements for calibrating and maintaining the accuracy of these facilities : 9- Purpose for which certificate of competency is sought (section or sections of the Act should be stated) : 10- Whether the applicant has been declared a competent person under any statute (if so, the details) : 11- Any other relevant information : 12- Declaration : I, ------------------------------ hereby, declare the information furnished above is true; I undertake : (a) that in the event of any changes in the facilities at my disposal (either addition or deletion) or my leaving the aforesaid organization, I will promptly inform the Chief Inspector; (b) to maintain the facilities in good working order, calibrated periodically as per manufacturers instructions or as per National Standards; and (c) to fulfill and abide by all the conditions stipulated in the certificate for competency and instructions issued by the Chief Inspector from time to time. Place : Date : Signature of the Applicant Declaration by the institution (if employed), I, ------------------- , certify that Shri --------------------, whose details are furnished above, is in our employment and nominate him on behalf of the organization for the purposes of being declared as a competent person under the Act. I also undertake that I shall :- (a) notify the Chief Inspector in case the competent person leaves our employment. (b) provide and maintain in good order all facilities at his disposal as mentioned above. (c) notify the Chief Inspector any change in the facilities (either addition or deletion). Place : Date : Signature of Head of the Institution of of the person authorized to sign on behalf Designation …………………… FORM OF APPLICATION OF GRANT OF CERTIFICATE OF COMPETENCY TO AN INSTITUTION UNDER SUB-RULE (2) OF RULE-2A 1- Name an full address of the organization : 2- Organization's status (specify whether Government, autonomous, Cooperative, Corporate, or private) : 3- Purpose for which certificate of competency is sought (specify sections of the act) : 4- Whether the organization has been declared as a competent person under this rule or any other statute and if so, give details : 5- Particulars of persons employed and possession qualifications and experience as set out in schedule annexed to sub-rule (1) of Rule-2A : Sl. No. Name and Designation Qualifications Experience Section(s) and the rule under which certificate of competency is sought for 1- 6- Details of facilities relevant to item 3 above) and arrangements made for their maintenance and periodic calibration : 7- Any other relevant information : 8- Declaration : I, -----------------------------hereby, on behalf of above are correct to the best of my knowledge, I undertake : (i) maintain the facilities in good working order, calibrated periodically as per manufacturers instructions or as per National Standards; and (ii) to fulfill and abide by all the conditions stipulated in the certificate for competency and instructions issued by the Chief Inspector from time to time. Place : Signature of Head of the Institution of of the person authorized to sign on Date : behalf Designation …………………… Form of Certificate of Competency issued to a person or an Institution in vursuance of Rule 2-A made under Section 2(ca). I................... in exercise of the powers under Section 2(ca) of the Act and Rule made thereunder, hereby recognise. or Shri in the employment of (Name of the institution) (Name of organisation) as a competent person for the purpose of carrying out tests, examinations and inspections and certification of such building, dangerous machinery, lift and hoists, lifting machine and lifting tackles, pressure plants, confined space, ventilation system and such other process or plant and equipment as the case may be, used in factory located in under Section and the rule made thereunder. This certificate is valid from to This certificate is subject to the following conditions namely :- (i) tests, examination and inspections shall be carried out in accordance with the provision of the Act and the Rule made thereunder; (ii) tests, examination and inspections shall be carried out under direct supervision of the competent person or by a person so authorised by an institution recognised to the competent person; (iii) the certificate of competency issued in favour of a person shall stand cancelled if the person leaves the organisation mentioned in his application; (iv) the institution recognised as a competent person shall keep the Chief Inspector informed of the names, designations and qualifications of the persons authorised by it to carry out tests, examinations and inspections. (v) ---------------- (vi) Place: Date: Signature of the Chief Inspector Official Seal Note. A separate certificate should be issued under each relevant section. A person or an institution may be recognised as a competent person for the purposes of more than one section of the Act. SCHEDULE Serial No. Section or rule under which competency is recognised Qualifications required Experience for the purpose Facilities at his command 1 2 3 4 5 1 Rules made under Section 6 and Section 112, Certificate of stability for A degree in Civil or Structural Engineering or a degree equivalent thereto Note. A separate certificate should be issued under each relevant section. A person or an institution may be recognised as a competent buildings. person for the purposes of more than one section of the Act. (i) A minimum experience of 10 years in the design or construction or testing or repairs of structures; (i) Knowledge of non- destructive testing, various codes of practices that are current and the effect of the vibrations and natural forces on the stability of the building. 2 Rules made under Section 21(2) 'Dangerous Machines' A degree Electrical or Mechanical or Textile Engineering or a degree equivalent thereto. (i) A minimum experience of 7 years in - (a) design or operation maintenance, or (b) testing, examination and inspection of relevant machinery, their guards, safety devices and appliances (ii) He shall be conversant with safety devices and their proper functioning. Gauges for measurement; instruments for measure- or ment of speed and any other equipment or device to determine the safety in the use of dangerous machines. 3 Section 28-Lifts and Hoists' A degree in Electrical or Mechanical Engineering or a degree equivalent thereto. (i) A minimum experience of 7 years in- (a) design or erection or maintenance; or (b) inspection and test procedure of Lifts and Hoists. (ii) He shall be (a) conversant with relevant codes of practices and test procedures that are current, (b) conversant with other statutory requirements Facilities for load testing tensile testing, gauge, equipment gadgets for measurement and any other equipment, required for determining the safe working conditions of Hoists and Lifts. covering the safety of the Hoists and Lifts 4 Section 29-Lifting Machines, chains, ropes, and lifting tackles A degree in Electrical or Metallurgical or Engineering or a degree equivalent thereto (1)A minimum experience of 7 years in- (a) design or erection or maintenance; or (b) testing, examination and inspection of lifting machines, chains, ropes and lifting tackles, (i) He shall be (a) conversant with the relevant code of practices and test procedures that are current; (b) conversant with fracture mechanics and metallurgy of the material of construction. (c) conversant with heat treatment, stress relieving techniques as applicable to stress bearing components and parts of lifting machines and lifting tackles. Facilities for load testing, tensile testing, heat treat- orment, equipment gadget for measurement, gauges and such other equipment to d determine the safe working conditions of the lifting 9 machines, chains, ropes and lifting tackles. 5 Section 31-Pressure plant A degree in Chemical or Electrical or Metallurgical or Mechanical Engineering or a degree equivalent thereto. (1) A minimum experience of 10 years in- (a) design or erection or maintenance, or (b) testing, examination and inspection plants. of pressure (ii) He shall be (a) conversant with the relevant codes of practice and test procedures relating to pressure vessels; (b) conversant with statutory requirements concerning the safety of unfired pressure vessels Facilities for carrying out hydraulic test, non- destruct- ive test, gauges equipments/ gadgets for measurement and other equipment or gauges to determine the safety in the use of pressure vessels and equipment opera- ting under pressure; (c) conversant with non- destructive testing techniques as are applicable to pressure vessels. 6 Section 36- 'precautions against dangerous fumes'. A Master's degree in Chemistry or a degree in Chemical Engineering. (i) A minimum experience of 7 years in collection and ana- lysis of environmental samples and calibration of monitoring equipment; (ii) He shall (a) be conversant with the hazardous chemicals properties of chemical and their and permissible limit values; (b) be conversant with the current techniques of sampling and analysis of the environmental contaminants. Meters, instruments and devices duly calibrated and certified for carrying out the tests and certifications of safety in working in confined spaces. 7 Ventilation system as required under various Schedules framed under Section 87 such as Schedules on- (i) grinding or glassing of metals and processes incidental thereto. (ii) cleaning or smoothing, roughering, etc. of articles by a jet of sand, metal shot or grit or other abrasive propelled by a blast of compressed air or steam. (iii) handling and processing of asbestos. (iv) manufacture of Rayon by viscose A degree in Mechanical or Electrical Engineering a degree equivalent thereto. (i) A minimum experience of 7 years in the design fabrication, installation, testing a of ventilation system and systems used for extraction and collection of dusts, fumes and vapours and other ancillary equipment. (ii) He shall be conversant with relevant codes of practice and test procedures that are current in respect of ventilation and extraction system for fumes. Facilities for testing the , ventilation system, instruments and gauges for testing the effectiveness of the extraction systems for dust, vapours and fumes and any other equipment needed for determining the efficiency and adequacy of these systems. He shall have the assistance of a person having a post graduate degree in Physics or diploma in Mechanical Engineering with at least 7 years of experience on related facilities. process, (v) foundry operations. Approval of Plans [Sections 6(i) and 112] 3

Previous and next

All provisions of Uttar Pradesh Factory Rules, 1950

Questions people ask

Is rule 2 of Uttar Pradesh Factory Rules, 1950 still in force?

No repeal of Uttar Pradesh Factory Rules, 1950 is recorded.