LawGrids logoLAWGRIDS.ORG

Regulation 118, Indian Boiler Regulations, 1950: Hemispherical Crowns

Indian Boiler Regulations, 1950 - Regulation 118

Text of regulation 118

Hemispherical Crowns

118. Hemispherical Crowns.—(a) All segments shall be pressed in one heat to 'correct curvature. The adjacent plates shall bed closely at the seams and wherever possible at the junction of two seams tho plates shall be maohined down to provide •a fair surface to tho joint, [f the thinning is dono by hoa+ing and hammoring the plate shall bo subsequently annealed. (b) The cylindrical portion of the crown shall be tangential to the hemispherical portion and fit truly to the shell. (c) Where hemispherical shell crowns are pressed from one plate they shall be pressed to form by machine in progressive stages without thinning and on com- •plction shall be annealed. 117. Dished End and Crown Plates.—(a) The inside radius to which a plate is dished shall not be greater than the external diameter of the shell to which it is attached, except in the case of Lancashire and Cornish boilers when the radius shall mot exceed 1^ timos the diameter of the sh 11. (b) Tho inside radius of curvature of the flanges tt the shell or firebox shall not be loss than four timos the thickness of the crown or end plato and in no case loss •than 2\ inches. (o) The inside radius of curvature to uptakes shall be not less than twice the thickness of the crown plate and in no case less than 1 inch. (d) Bunged mouth-pieces may be welded on to end plates in place of the ortho- •dox flanging for the attachment of furnace tubes. Such welding shall comply •with provisions of Regulation 125. (e) Manhole frames may be similarly welded on the front end plates, and will 'be subject to piovisionn of Regulation 125. 118. Tube Plates.—Smokebox tube plates ahull bo flanged for attachment to the 'barrel or shall be flat and connected thereto by an external riveted angle ring.

Previous and next

All provisions of Indian Boiler Regulations, 1950

Questions people ask

Is regulation 118 of Indian Boiler Regulations, 1950 still in force?

No repeal of Indian Boiler Regulations, 1950 is recorded.