Regulation 118, Indian Boiler Regulations, 1950.: Hemispherical Crowns
Indian Boiler Regulations, 1950. - Regulation 118
Text of regulation 118
Hemispherical Crowns
118. Hemispherical Crowns.—(a) All segments shall be pressed in one heat to
'correct curvature. The adjacent plates shall bed closely at the seams and wherever
possible at the junction of two seams tho plates shall be maohined down to provide
•a fair surface to tho joint, [f the thinning is dono by hoa+ing and hammoring
the plate shall bo subsequently annealed.
(b) The cylindrical portion of the crown shall be tangential to the hemispherical
portion and fit truly to the shell.
(c) Where hemispherical shell crowns are pressed from one plate they shall
be pressed to form by machine in progressive stages without thinning and on com-
•plction shall be annealed.
117. Dished End and Crown Plates.—(a) The inside radius to which a plate
is dished shall not be greater than the external diameter of the shell to which it is
attached, except in the case of Lancashire and Cornish boilers when the radius shall
mot exceed 1^ timos the diameter of the sh 11.
(b) Tho inside radius of curvature of the flanges tt the shell or firebox shall not
be loss than four timos the thickness of the crown or end plato and in no case loss
•than 2\ inches.
(o) The inside radius of curvature to uptakes shall be not less than twice the
thickness of the crown plate and in no case less than 1 inch.
(d) Bunged mouth-pieces may be welded on to end plates in place of the ortho-
•dox flanging for the attachment of furnace tubes. Such welding shall comply
•with provisions of Regulation 125.
(e) Manhole frames may be similarly welded on the front end plates, and will
'be subject to piovisionn of Regulation 125.
118. Tube Plates.—Smokebox tube plates ahull bo flanged for attachment to the
'barrel or shall be flat and connected thereto by an external riveted angle ring.
Previous and next
Questions people ask
Is regulation 118 of Indian Boiler Regulations, 1950. still in force?
No repeal of Indian Boiler Regulations, 1950. is recorded.