Regulation 104, Indian Boiler Regulations, 1950.: CireumSeiential ana End Seams
Indian Boiler Regulations, 1950. - Regulation 104
Text of regulation 104
CireumSeiential ana End Seams
104. CireumSeiential ana End Seams.—(a) The s-trcngih of the search joining
the end platen of flat end Lancanhi]e and Cornish boilers with the eylindi ical shells
shall be not lew than S8 per cent, of the strength of the calculated thickness of the
plat" JR found by Equation (1), The str ength of the int ormediate ?w»mR of flat
ended bmlet'H and all scam a of diRh ended boilers shall be 50 per cent of that of the
longitudinal seams but in no rust less than 42 per tent of the strength of tho cal-
culated thickness of the plate.
(b) In boilers of other types the strength of the circumferential and transverse
Beanie shall be not loss than 38 per cent, of that of calculated thickness of the plate
as found bv Equation (1) and not less than fi() peT cent of that of the longitudinal
seams whichever is the greater.
(o) When tho shell plate thickness exceeds ]l/lfi inch the intermediate cir-
cumferential seams shall be double riveted.
(d) In tho ca^e of the electrode boileis where the diameter of the shell does not
exceed 18", the end platen may be attached to the fiholl by means of Electric Arc
fillet w« ldin.2 provided the welds are stress relieved and the cubical capacity and
working pressure do not exceed 30 gallons and 120 lbs. respectively.
Previous and next
Questions people ask
Is regulation 104 of Indian Boiler Regulations, 1950. still in force?
No repeal of Indian Boiler Regulations, 1950. is recorded.