LawGrids logoLAWGRIDS.ORG

Regulation 88, Indian Boiler Regulations, 1950.: (a) Transverse Test Bars

Indian Boiler Regulations, 1950. - Regulation 88

Text of regulation 88

(a) Transverse Test Bars

88. (a) Transverse Test Bars.—Tho tmnsverae tost bars of the diametor specified by the Inspecting Authority according to the main cross sectional thickness of the casting represented, shall oonform to the following dimensions : Diiimoter of toat Bar in. 0-6-fc 0-87S± l-2± l-6± 2-l± Limits on dLimotor in. 0 -045 0 -06fl 0 090 0-10 0-10 Overall length in. 10 ie 21 21 27 Main crosa-ueotional thickness of casting represented in. Not evcooillng 3/8 Over 3/8 and not exceeding 3/4 Over 3/1 Hiir] not exoeoding 1,1/8 Over, 1,1/H urui not exrooding 1, 5/8 Over 1,5/8 Bars east to iv si/.e in excess of the limits given above may be mar-hiuerl to a diameter within the specified limits. Bars cast within these limits of diameter may also be machined before the transverso test io made, providing tha t the finished diameter falls within thche limits. DIAGRAM L ,-J. JU . L .A , H iU t . 1JN U 1A ffiA J -^ A U i TABLE Diameter as cast B in. 0-6 0-875 1-2 1-6 2-1 Gauge diameter D in. 0-309 0-564 0-798 1-128 1-696 Area A sq. in. 0-125 0-25 0-50 1-00 2-00 Miu. parallel length P in. 1 2 2 2 2 Min. radius R in. u 3i 31 Min. length of plain C in. H 2 21 3i Screwed ends Size E in. i B.S.P. 9/16B.S.F. 9/16 B.S.W. 3/4 B.S.F. 7/8 B.S.W. 1,1/8 B.S.F. 1,1/8 B.S.W. H B.S.P. 11 B.S.W. 2 B.S.P. Min. length F in. 9/16 3/4 i-i /a 2 Approximate minimum ov^all length Plain ends • L P in. 41 7-1/16 8-1/32 1 1- 1/8 Screwed ends LS in. 3 4-13/16 5-7/8 Main cross-3e«tional thickness of casting represented in. Not exceeding 3/8 Over 3/8 and not exceeding 3/4 Over 3/4 and not exceeding 1-1/8 Over 1,1/8 and not exceeding 1-5/8 O-T-ST 1-5/8. Th» test bars shall be cut as paralfel bars of the diameter given in Column X and than maohin»d to th» dimension* D and P in the above tabW. | (b) Tensile Test Bars.—Tho tonsils ton! bturs of tho diameter specified by the Inspecting Authority, according to the main croSH-wectional thickness of the oasting" represented, shall conform to the dimensions shown in tho following table. Bars may bo tested with either plain or bercwod ends. (c) For castingn over 2 inches in lb.ieU.neHH a test bar of larger diameter than 2-1 inches mu.y be used by agreement bolween the manufacturer and the Inspecting Authority. For diagram and table- wee pp. 28 to 29 MECHANICAL TEST 89. The canting must comply with the transverse and tensile teats spooiflod in Regulations 90 and 91. All tent pieces shall be selected by the inspector and tested in hid presence and to hin satisfaction. TRANSVERSE TEST 90. A transverse test bar cast in accordance with Regulation 88(a) must, whon placed on supports wet at the distance shown in column 2 of the following table sustain a load applied at the centre of not loss than that shown in column 3 and must show before luptme a deflect ion not lent) than that shown in column 4. The suppoitH and the point of application of the load shall he rounded to iv radiuft of not less than 1/8 inch. Diamotor of tent bar 1 m. 0-0 0-875 1-2 1 0 2 - 1 Distance between HlippOliH 2 i n . » J2 18 18 24 Minimum breaking load—Grade A 3 lb . «30 1,185 1,050 4.2H0 0,600 Minimum dufloc- tion—Grude A 4 in. 0'07 0 10 0-15 0-12 0 lfl If the diameter of a trsinsvorne test bur in cuflt varies within the limits specified in Regulation 88 (a) I he equivalent bunking load for the 1 >ut bar of nhindurd dia- meter shall be calculated in uccord.iine with the factors given in Appendix F. TENSTLE TEST 91. A tensile tesh bin machinal to the1 dimensions shown in Regulation 88 (b) and tested with either plain or screwed endH must show a bieaking strength of not less than that shown m tho following ttible. Diamoter ot tost btu" i n . 0-0 0-875 1 -2 ] -fi 2-1 J\Tmuni3m Tjltiinatt) tonHilo Htroflê —^Oi'ado A TOIIB por sq, in. 12 .5 12 11 10-fi 10 NOTD.—Solf-aligning grips to onsure axial loading ai'o rucoraroeudod. NUMBER OF TRANSVERSE AND TENSTLE TESTS 92. The nurabi'i of U«nts rnquiicd for each batch of cufitiiijrs hhull ho in aicot- dance with the following table, the various clas-fccf-. oi' uislings being divided into four repiesonttitiv-' gioiipr. One test shall refer to one transverse and ono tensile test, whethei taken i'lom otic or two lest bain at c .">-!.. Group 1 2 3 Woij/ht of cuHiniKH Up to 28 lb Over 2M lb, iind upto ] owl. Over 1 owt. and upto orin Lou T«Ht roquiremontu Ono test for ouch 30 cwt. of pnutm^B or part rlioinof. Ono tent for oaL'li 2 toils of castings or Xiait thmoof. One tost lor 'Jacli 4 tons of OftstingB or part t Unroof. In (ho above (Jroups, I, 3 und 3, all castings represented by one test must ho poured from tho same ludle or same heut as the bur nr barn provided for the test. 4 OVOT 1 ton and important castings whoro mutiinlly agrcod upon. One tost for enoh 4 tonfl of oustingB or part thereof or for eooh caatinp; weighing 4 tonn ur more.

Previous and next

All provisions of Indian Boiler Regulations, 1950.

Questions people ask

Is regulation 88 of Indian Boiler Regulations, 1950. still in force?

No repeal of Indian Boiler Regulations, 1950. is recorded.