LawGrids logoLAWGRIDS.ORG

Regulation 33, Indian Boiler Regulations, 1950.: Plates

Indian Boiler Regulations, 1950. - Regulation 33

Text of regulation 33

Plates

33. Plates—(a) Process.—Tho oox>por shall be nre-refinod or electrolytic, and hot-rolled from suitable nakes. (b) Chemical Composition.—The platan shall contain not loss than 99 per oent. of coppor, and between -3 % and -5 % of arsenic. (o) Freedom from defects.—Tho plates shall be cloan, smooth and froe from defects and shall have u workmanlike finish They shall be thoroughly annealed. (d) Boiling Margin.—No plat a shall bo under the specified thickness at any part, nor more than 5% over tho calculated weight. The scrap margin, partly sheared and left attached, shall be no1 lean than 3 inches tit the ends and 1J inches tiit each Hide. (e) Tensile Tests.—One tensile tusl shall bo taken from eaoh plato as rolled. The tensile breaking strength, fi oin Standard Test Piece A, shall not be leas than 14 tons per sq. in. "with an elongation of not loss than 35%. (f) Hot and Cold Bend teats. -Ono hot (temperature between 1200°T\ and 1400oI\) and ono cold bend test shall bo taken from each plate as rolled. Tor either hot or cold bend 1estH the test piece •ahall withstand being doubled. ovei without fraci uro uniil the sides are touching and parallel.

Previous and next

All provisions of Indian Boiler Regulations, 1950.

Questions people ask

Is regulation 33 of Indian Boiler Regulations, 1950. still in force?

No repeal of Indian Boiler Regulations, 1950. is recorded.