LawGrids logoLAWGRIDS.ORG

Regulation 28, Indian Boiler Regulations, 1950.: Branding

Indian Boiler Regulations, 1950. - Regulation 28

Text of regulation 28

Branding

28. Branding.—Every plate and bar shall be clearly and distinotly marked by the maker in two plaoes with .in approved quality hi and indicating that the material has complied with the lequired tests ; and alno with the number or identification marks by which they can be traced to tho charge from winch the material was made. 24. Defacing of rejected material.—In the event of the matorial failing in any case to withstand the prescribed tests, the Inbpectnr or Inspecting Officer shall see that the quality brand stamped on the matorin.1 has been defaced by punch marks xtending bevond the brand in the form of a cross, denoting that the material has e«ec rejected. J.. .ih (j&A* l i JU Ox 1JNLM.A J B A I . IAUHJ , A.i.\k. u.. [ £ A B T H 26. Facilities tor inspection.—The maker shall adopt a system of marking tHe' inpotH, billets, slabs, plates, bars, e tc , which will enable all finished material to bo traced to the original charge, and the Inspector or Inspecting Officer shall be given every facility for tracing all platen and bars to then* respective charges, and for witnessing the required testa. When ho is satisfied with the material and with the results of the tents, tie shall be furnished with two copies of the advice notes of the' material for his signature. 26. Steel not produced where rolled.—Where steel is not produced in the work* at which it is rolled, a certificate in Form IV shall be supplied to the Inspecting Officer deputed to witness the testing of the material, stating the Open Hearth or Electric Process by which it was made, the name'of the Steel Maker who supplied it, also the numbers of the charges for reference to the books of the Steel Maker. The number of the charge shall be marked on each plate or bar for the purpose of identi- fication, 27. Maker's certificate.- -Before tho mill sheets are signed, the maker shall furnish the Inspecting Officer with a certificate in Form IV guaranteeing that tha material ha.s been made by the Open Hearth or an Electric Process acid or basio and that it has been subjected to, and has withstood satisfactorily the test above described in the presence of the Inspecting Officer. WEOUOT IRON STAY AND HIVET BARS 28. Rivet Bars.--The tensile breaking strength shall bo between 21 nnd 2fl tor* with HU elongation of not less, than 25 per cent, measured on tho standard Tost Pieoe B (as rolled) or 30 per cont. measured on the Standard Test Pieoe Bx (as rolled).

Previous and next

All provisions of Indian Boiler Regulations, 1950.

Questions people ask

Is regulation 28 of Indian Boiler Regulations, 1950. still in force?

No repeal of Indian Boiler Regulations, 1950. is recorded.