Section 37, The Factory Act , 1948: Explosive or inflammable dust, gas, etc
The Factory Act , 1948 (63 of 1948) - Section 37
Text of section 37
Explosive or inflammable dust, gas, etc
37. Explosive or inflammable dust, gas, etc.- (1) Where in any factory any
manufacturing process produces dust, gas, fume or vapour of such character
and to such extent as to be likely to explode on ignition, all practicable measures
shall be taken to prevent any such explosion by-
(a) effective enclosure of the plant or machinery used in the process;
(b) removal or prevention of the accumulation of such dust, gas,
fume or vapour;
(c) exclusion or effective enclosure of all possible sources of ignition.
(2) Where in any factory the plant or machinery used in a process such as is
referred to in sub-section (1) is not so constructed as to withstand the probable
pressure which such an explosion as aforesaid would produce, all practicable
measures shall be taken to restrict the spread and effect of the explosion by the
provisions in the plant or machinery of chokes, baffles, vents or other effective
appliances.
(3) Where any part of the plant or machinery in a factory contains any
explosive or inflammable gas or vapour under pressure greater than atmospheric
pressure, that part shall not be opened except in accordance with the following
provisions, namely:-
(a) before the fastening of any joint of any pipe connected with the
part or the fastening of the cover of any opening into the part is
loosened, any flow of the gas or vapour into the part of any such
pipe shall be effectively stopped by a stop valve or other means;
(b) before any such fastening as aforesaid is removed, all practicable
measures shall be taken to reduce the pressure of the gas or
vapour in the part or pipe to atmospheric pressure;
(c) where any such fastening as aforesaid has been loosened or
removed effective measures shall be taken to prevent any
explosive or inflammable gas or vapour from entering the part or
pipe until the fastening has been secured, or, as the case may
be, securely replaced:
Provided that the provisions of this sub-section shall not apply in the case of
plant or machinery installed in the open air.
(4) No plant, tank or vessel which contains or has contained any explosive or
inflammable substance shall be subjected in any factory to any welding, brazing,
soldering or cutting operation which involves the application of heat unless
adequate measures have first been taken to remove such substance and any
fumes arising therefrom or to render such substance and fumes non-explosive or
non-inflammable, and no such substance shall be allowed to enter such plant,
tank or vessel after any such operation until the metal has cooled sufficiently to
prevent any risk of igniting the substance.
1 Ins. by Act 20 of 1987 (w.e.f. 1.12.1987).
Sec. 40 The Factories Act, 1948 25
(5) The 1[State] Government may by rules exempt, subject to such conditions
as may be prescribed, any factory or class or description of factories from
compliance with all or any of the provisions of this section.
2[38. Precautions in case of fire.- (1) In every factory, all practicable
measures shall be taken to prevent outbreak of fire and its spread, both
internally and externally, and to provide and maintain-
(a) safe means of escape for all persons in the event of a fire, and
(b) the necessary equipment and facilities for extinguishing fire.
(2) Effective measures shall be taken to ensure that in every factory all the
workers are familiar with the means of escape in case of fire and have been
adequately trained in the routine to be followed in such cases.
(3) The State Government may make rules, in respect of any factory or class
or description of factories, requiring the measures to be adopted to give effect to
the provisions of sub- sections (1) and (2).
(4) Notwithstanding anything contained in clause (a) of sub- section (1) or
sub-section (2), if the Chief Inspector, having regard to the nature of the work
carried on in any factory, the construction of such factory, special risk to life or
safety, or any other circumstances, is of the opinion that the measures provided
in the factory, whether as prescribed or not, for the purposes of clause (a) of sub-
section (1) or sub-section (2), are inadequate, he may, by order in writing, require
that such additional measures as he may consider reasonable and necessary, be
provided in the factory before such date as is specified in the order.]
Previous and next
Questions people ask
Is section 37 of the Factory Act , 1948 still in force?
No repeal of the Factory Act , 1948 is recorded.