Section 22, The Factory Act , 1948: Work on or near machinery in motion
The Factory Act , 1948 (63 of 1948) - Section 22
Text of section 22
Work on or near machinery in motion
22. Work on or near machinery in motion.- 3[(1) Where in any factory it
becomes necessary to examine any part of machinery referred to in section 21,
while the machinery is in motion, or as a result of such examination, to carry
out-
(a) in a case referred to in clause (i) of the proviso to sub-section (1)
of section 21, lubrication or other adjusting operation; or
(b) in a case referred to in clause (ii) of the proviso aforesaid, any
mounting or shipping of belts or lubrication or other adjusting
operation,
while the machinery is in motion, such examination or operation shall be made
or carried out only by a specially trained adult male worker wearing tight fitting
clothing (which shall be supplied by the occupier) whose name has been recorded
in the register prescribed in this behalf and who has been furnished with a
certificate of his appointment, and while he is so engaged:-
(a) such worker shall not handle a belt at a moving pulley unless-
(i) the belt is not more than fifteen centimetres in width;
(ii) the pulley is normally for the purpose of drive and not
merely a fly-wheel or balance wheel (in which case a belt
is not permissible);
(iii) the belt joint is either laced or flush with the belt;
1 Subs. for original proviso by Act 94 of 1976 (w.e.f. 26.10.1976).
2 Subs. for “Provincial” by Adaptn. of Laws Order, 1950.
3 Opening paragraph and Cl.(s) Subs. by Act 94 of 1976 (w.e.f. 26.10.1976)
18 The Factories Act, 1948 Sec. 23
(iv) the belt, including the joint and the pulley rim, are in
good repair,
(v) there is reasonable clearance between the pulley and any
fixed plant or structure;
(vi) secure foothold and, where necessary, secure handhold,
are provided for the operator; and
(vii) any ladder in use for carrying out any examination or
operation aforesaid is securely fixed or lashed or is firmly
held by a second person.]
(b) without prejudice to any other provision of this Act relating to
the fencing of machinery, every set screw, bolt and key on any
revolving shaft, spindle, wheel or pinion, and all spur, worm and
other toothed or friction gearing in motion with which such
worker otherwise be liable to come into contact, shall be securely
fenced to prevent such contact.
1[(2) No woman or young person shall be allowed to clean, lubricate or
adjust any part of a prime mover or of any transmission machinery while the
prime mover or transmission machinery is in motion, or to clean, lubricate or
adjust any part of any machine if the cleaning, lubrication or adjustment thereof
would expose the woman or young person to risk of injury from any moving part
either of that machine or of any adjacent machinery.]
(3) The 2[State] Government may, by notification in the Official Gazette,
prohibit, in any specified factory or class or description of factories, the cleaning,
lubricating or adjusting by any person of specified parts of machinery when those
parts are in motion.
Previous and next
Questions people ask
Is section 22 of the Factory Act , 1948 still in force?
No repeal of the Factory Act , 1948 is recorded.