Section 37, The Factories Act, 1948: Explosive or inflammable dust, gas, etc
The Factories Act, 1948 (63 of 1948) - Section 37
Text of section 37
Explosive or inflammable dust, gas, etc
37. Explosive or inflammable dust, gas, etc.—(1) Where in any factory any manufacturing process
produces dust, gas, fume or vapour of such character and to such extent as to be likely to explode on
ignition, all practicable measure shall be taken to prevent any such explosion by—
(a) effective enclosure of the plant or machinery used in the process;
(b) removal or prevention of the accumulation of such dust, gas, fume or vapour;
(c) exclusion or effective enclosure of all possible sources of ignition.
(2) Where in any factory the plant or machinery used in a process such as is referred to in
sub-section (1) is not so constructed as to withstand the probable pressure which such an explosion as
aforesaid would produce, all practicable measures shall be taken to restrict the spread and effects of the
explosion by the provision in the plant or machinery of chokes, baffles, vents or other effective
appliances.
(3) Where any part of the plant or machinery in a factory contains any explosive or inflammable gas
or vapour under pressure greater than atmospheric pressure, that part shall not be opened except in
accordance with the following provisions, namely:—
(a) before the fastening of any joint of any pipe connected with the part or the fastening of the
cover of any opening into the part is loosened, any flow of the gas or vapour into the part of any such
pipe shall be effectively stopped by a stop-valve or other means;
(b) before any such fastening as aforesaid is removed, all practicable measures shall be
taken to reduce the pressure of the gas or vapour in the part or pipe to atmospheric pressure;
(c) where any such fastening as aforesaid has been loosened or removed effective measures shall
be taken or prevent any explosive or inflammable gas or vapour from entering the part or pipe until
the fastening has been secured, or the case may be, securely replaced;
Provided that the provisions of this sub-section shall not apply in the case of plant or machinery
installed in the open air.
(4) No plant, tank or vessel which contains or has contained any explosive or inflammable substance
shall be subjected in any factory to any welding, brazing, soldering or cutting operation which involves
the application of heat unless adequate measures have first been taken to remove such substance and any
fumes arising therefrom or to render such substance and fumes non-explosive or non-inflammable,
and no such substance shall be allowed to enter such plant, tank or vessel after any such operation until
the metal has cooled sufficiently to prevent any risk of igniting the substance.
(5) The State Government may by rules exempt, subject to such conditions as may be prescribed, any
factory or class or description of factories from compliance with all or any of the provisions of this
section.
1[38. Precautions in case of fire.—(1) In every factory, all practicable measures shall he taken to
prevent outbreak of fire and its spread, both internally and externally, and to provide and maintain—
(a) safe means of escape for all persons in the event of a fire, and
(b) the necessary equipment and facilities for extinguishing fire.
(2) Effective measures shall be taken to ensure that in every factory all the workers are familiar with
the means of escape in case of fire and have been adequately trained in the routine to be followed in such
cases.
(3) The State Government may make rules, in respect of any factory or class or description of
factories, requiring the measures to be adopted to give effect to the provisions of sub-sections (1)
and (2).
1. Subs. by Act 20 of 1987, s. 19, for section 38 (w.e.f. 1-12-1987).
24
(4) Notwithstanding anything contained in clause (a) of sub-section (1) or sub-section (2), if the Chief
Inspector, having regard to the nature of the work carried on in any factory, the construction of such
factory, special risk to life or safety, or any other circumstances, is of the opinion that the measures
provided in the factory, whether as prescribed or not, for the purposes of clause (a) of
sub-section (1) or sub-section (2), are inadequate, he may, by order in writing, require that such additional
measures as he may consider reasonable and necessary, be provided in the factory before such date as is
specified in the order.]
Previous and next
Questions people ask
Is section 37 of the Factories Act, 1948 still in force?
No repeal of the Factories Act, 1948 is recorded.