LawGrids logoLAWGRIDS.ORG

These rules may be called the Goa, Daman and Diu Factories Rules, 1985.

Notification - Insurance Act, 1948

Text of this notification

• " • ,,~ft'J, ' I REGD. OOA ~ I; Panaji, 3rd May, 1985 (Vaisaka 13, 1907) SERI'8S I No. ,5 OFFICIAL GAZETTE , , ,GOVERNMENT OF 'GOA, DAMAN 'AND DIU EXTRI\ORDI N,I\RY GOVERNMENT OF GOA, DAMAN' AND DIU Industries and Labour Department . Notification 26/4/82-ILD Whereas certain draft rules, which the Govern­ ment of Goa, Daman and Diu proposed to make in exercise of the powers conferred by section 112 of the Factories Act, 1948 (Central Act 63 of 1948), were published as required by section 115 of the said Act at' pa.ge 231 to 371 of the Extraordinary , Official Gazette, Series I, No. 30 dated 27-10-1984 under Notification No. 26-4-82-ILD dated 28-5-1984 of th~ Industries and Labour, Department, Govern­ ment of Goa, Daman and',Diu inviting objecti9ns and suggestions from all persons likely to be affected thereby within three months from the date of publi­ cation of the said Notification in the Official Gazette. ' " ' And whereas the said Gazette.was made available to the public on 27~10-1984; And whereas no objection and suggestions have been received from the public on the said draft by the Government. Now, therefore, in exercise of the powers con­ ferred by section 112 of the Factories Act, 1948 (Central Act 63 of 1948), the Government of Goa, Daman and Diu hereby makes the following rules, namely: 1. Short title, extent' and commencement • ...:. '(1) These rules may be called the Goa, Daman and Diu Factories Rules, 1985. (2) They extend to the whole of the Union terri­ tory-.of Goa, Daman and Diu. , ' (3') They shall come intcdorce at once. 2. Defiuitions .. - In these rules, unless the context ·,otherwise requires,- (a) "Act" means the Factories Act, 1948 (Cen- tral Act 63 of 1948);, ' (b) "Appendi?," means an appendix appencied to these rules' " , . <_J • e , (c) "Artificial humidification" means the intro­ duction of moisture into the air, of a room by any artificial means wha.tsoever except the unavoidable escape of steam or water vapour into the atmos- , phere directly due to a manufacturingproce.ss: 'Provided that the introductipnof air directly from outside through moistened mats or screens placed in openings at times ,when the tempel'ature , of 'the rooni is 80 degrees or more, shall llpt be deemed to be artificial humidi,fjc!ttion. (b) "Belt" includes any driving strap,cr rope; (e) "Degrees", (qr temperafure) means degrees on the Fahrenheit scale; (f) "District Magistrate" includes such other official as may be appointed by the Government in that behalf; . (g) "Formh means a Form appended to these rules; (h) "Fume" includes gas or vapour; (i) "Government" means the Government of Goa, Daman and Diu; , (j) "Health Officer" means the Municipal Health Officer or Health Officer under the Direc­ torate of Health Services or such other official as may be appointed by the' Government in that ' behalf; , , (k) "Hygrometer" means an accurate' wet and ,dry ~~lb hygrometer conforming to the prescribed' conditIOns, as regards construction and mainte­ nance; (1) "Maintained" ,means maintained in an effi­ cien~ state, inefficient working order and in good repaIr; -' .. (m) "Manager" means the person responsible to the occupier for the working of the factory for the purposeS of the Act; , (n) "Section" means a section of the Act. 78 3. Approval of plans. - (1) No site shall be used for the 10catiOJi ofa factory or no building in a fac­ tory shall be constructed, re-constructed, extended or taken into use as a factory or part of a factory or any other extension' of plant or machinery shall be·. carrie<l. . out in a factory unless previous per­ mission in writing is obtained from the Chief Ins­ pector of Factories. Application for such permission shall be made in Form 1 which shall be accompanied by the. following documents: - (a) A flow chart of the manufacturing process supplemented by a brief description of the process in its various stages; . (b) Plans in duplicate drawn to scale show­ ing:- (i) the site of the factory and immediate surroundings' including adjacent buildings and other structures, roads, drains, etc.; (ii) the plan, elevation and necessary cross­ -sections of the various buildings, indicating all relevant details relating to natural lighting, ventilation and means of escape in case of fire. The plans shall also clearly indicate the posi­ tion or the plant and machinery, aisles and passage ways; and (c) Such other particulars as the Chief Ins­ pector may require: Provided that the provisions of the above sub-rule (1) shall also apply to (a) any factory which was either in existance on the date of commencement of the Act or whiCh lias not been constructed or extended since then. (d) Where any inflammable solvent for the extraction of oil from oil-cakes, oil-seeds or. any other material is to be or intended to be used, handled or treated in any manner in any process which may be conducted in any factory, appli­ cation for such permission shall also be accom­ panied by a no objection certificate in respect­ of the site of the factory from the local autho­ rity concerned and from an officer not below the rank of Town Planner in Directorate of Town Planning in charge of the area appointed by the Government in this behalf. (2) If the Chief Inspector is satisfied that the pians are in consonance with .the requiremehts <:>f the Act, he shall, subject to such conditions as he may specify, approve them by signing 'and returning to the applicant one copy of each plan or he may call for such other particulars as he' may require to enable such approval to be given: Provided that no such approval shall 'be given in respect of the site of any factory referred to in the proviso to sub-rule (1) unless the Chief Inspec­ tor of Factories and the District Magistrate con­ cerned have personally visited the site of the factory and have approved the same, and in case of any difference of opinion among the authorities regard­ ing the location of the plant, the matter shall be referred to the Government for decision: Provided further that no place shall be disappI'O­ ved unless the applicant is given an opportunity to be heard and . the Chief Inspector Dr as the case may be, the Government has recorded its reasons 'in that behalf. SERIES I No.5 4. Prohibition of use of a premiseS as a' factOry without a valid licence; - No occupier of a factory shall use any premises as a factory Dr carry on any manufacturing process in a factory except under a licence obtained or renewed in respect of such pre­ mises in accordance with the provisions of these ruies. 5. Certificate of Stability. -'- No manufacturing process shall be carried on in any building of a fac­ tory constructed, reconstructed or extended, or in any building. which has been: taken into use as a· factory or part of a factory until.'s. certificate of stability, signed by a competent person, in respect of that building in the form given below has been sent· by the occupier or manager of the factory to the Chief Inspector, arid accepted by him. Form of Certificate of stabllity 1. Name of the factory ... 2 .. Village, town and district in which the factory is situated ... 3. Full postal address of the fac­ tory .. , 4. Name of the occupier of the fac­ tory ." 5. Nature of manufacturing pro­ cess to be carried on in the fac­ tory ... 6. Number. of floors on which workers will.be employed... ., 7. Nature and amount of moving power ... .' . I certify that I have personally inspected the' building/buildings the plans of which have been approved by the Chief Inspector in his letter No .... dated ... and examined the various parts including the foundations with specialreferen,ce to the machi­ nery, plant, etc., that have been installed, I am Dr the opinion that the .building/buildings which has/ /haye been constructed/reconstructed/ extended/ /taken irito use is/are in accordanC'e with the plans. approved by the Chief Inspector in his letter men­ tioned above, that it/they is/are structurally sound and that its/their stability will not be endangered by its/their use as a factory/part Qf a factory for the manufacture· of ... for. which .the machinery, plant, etc. installed are intended. Signature ... Name in block letters ". Qualification ... Address ... Date' .. ; Signature of the Occupier' Date ... . If employed by a company or . associatiOJi,' name and .address . of the company or association NOTE: The person giving the certificate must. be- n· (a) A corporate Member of the Institution of Civil Engineers, or . y, 3RD MAY, 1985 (VAISAKA 13,1907) . (b) A corporate Member of the Institution of structural Engineers, or (c) A Fellow, Associate or Licentiate of the Royal Institute o( British Archi­ tects, or (d) Be a graduate of Civil Engineering and also .be a corporate member of the Ins­ titute of Engineers (India) provided that no person, except in the case of a build­ ing occupied or erected by any Government where a certificate may be granted by an officer· not below therank ofan Executive Engineer, shall be autho­ rised to sign the certificate of stability if he is in the fuIltime employment of the owner or the builder oIthe building concerned, '79 6. Applicationfor rilgistratiortaitd graiitoflicence . - (1) The 'occupler.6r manager ;'ofeveryc,ij'actory coming within the scope of this,Act after, its com­ mencement shall submit to' the Chief mspector ' an application in triplicate in Form 2 for the registra­ tion of the factorY accompanied by an ;l.ppUcation in Form .iI· for the grant of licence therefo~: ' . "".-" . ";' Provided that theoecupier.or.manager,of)a place to which theprovisions.of the Act are made appli~ cable by anotification·tirider.' section i 81)iof'thei:Act shall .submitan application within' 30. days of ·the . date of that notification. ' ' (2) Every such application shall be accompanied by a treasury. receipt or an invoice for book adjust' ment,asthe case may be, for payment of ,the fees· prescribed for the 'purpose as specified' in 'the Sche­ dule below:- SCHEDULE . . , SCale of fees payable for licence an~ mm~l renewai of _lioopce by 'factories'. Quantity of H. P. installed (Maximum H. P.) Upto 20 From From From From. : FrOm From From 2001 1,501. to and above 2,000 21·to 50 51 to,1oo 101 to 250 251 to 500 501 to 750 Rs. Rs. Rs. 1, Nil 25 50 100 2, Up to 10 ... 50 150 250 3. Above 10 but not above 50 100 250 400 4, Above 50 but not above 100 . ~. '250 350 600 5, Above 100 but not above 250 ... 350 500 800 6. Above 250 but not above 50'0 500 750 , 1,000 7. Above 500 but not above 750 750 1,000 '1,500 8. Above 750'but not above 1000 1,000 < 1,500 2,000 9. Above 1000 1,500 2,000 2,500 Provided that ~ (i) fees to b~ charged for the following classes of factories shall, subject to a minimupl of rupees five, be half of those speCified above, if they do not work for more than 180 days in the aggregate in a calendar year: - . . (a) Gur Factories, . (b) Cashewnut Factories, (c) Rice Mills. (ii) in the case of other factories working for a part of the year arid COinmencmg work on or after 1st day of July, the fees to be charged for the first time shall, subject to a' minimum of rupees five, be half of those specified in the Schedule afol'esaid, 7. Grant of licence. - The Chief Inspector may, on application being made to him under sub-rule (1) of rule 6 and on payment of the fees prescribed in sub~rule (2) of that rule and on being satisfied that there is no objection to the grant of licence applied for, register the. factory and grant a licence in Form 4 to the applicant to use as factory such premises as are specified in the application and subject to compliance with such conditions as are specified in the licence: Provided that, subject to .the provisions of sub­ ~section (3) of Section 6; the Chief Inspector may Rs. Rs, Rs. Ro. 250 400 500 750 400 600 800 1,000 600 800 . 1,250 1,500 800 1,250 1;500 2,000 1,250 1,500 2,000 2,500 1,500 2,000 2,500 3,000 2,000 2,500 3,000 3,500 2,500 3,000 3,500 4,000 3,000 3,50{) 4,060 4,500 1,000" 1,500: . 2,000' 2;50d:,-"· '"3;000; 3;500 4,OO~ 4,500 5,000:0 . Rs:. 1,500 2',000' 2,500' . 3,000 3,500 4,000 4,500 . 5,000 5,500 Rs, 1,750 2,500 3,009 3,500 . 4,000 4,500 5,000 5,500 6,000 refuse to register the factory and grant a licence if he is· .satisfied - 'C' ~ :-"~ ,{:, : ' "- (i) that an application' is notaccoinpanied by plans- ," ,., . .. ,,;.'; (a) of the site on 'which,the"factotyistobe situated; and " (b ) for the construction or e~te~~io~i of the factory; . .... . , ,-,',' . (Ii). ,that the plans s~ submitted have not~en . approved by the Chief Inspector:;': e' .. i'· ..... . '",,'" - -. _: ,. , ,,"'f- .j. - - -;., - ,:- . (iii) that the factory has notoeen constructed in accordance with the plans appr'dvedbylheChief Inspector or incompliance With the. conditions subject to which the plans ar¢./iPPwve<:f;. , . (iv) that material requirements. of the. relevant provisions specified in the SchEidules to rule 131 in relation to the factory concerned have not been complied wIth; or" . '" (v) that there is imminent danger to clife in the fa~tory due to explosive or. inflanunabledust, gas or .fumes, and effective measures.)n his' opinion have not been taken to remove the danger. . (2) Subject to the provisions he1!~,ka,.fter c~ntained with respect to susl?~nsioI).an~ unleflS,ear.lier re~ew:p, under rule. 9, eVery such lIcence ."l!hltl!:rem,aln ,m force until the. 31st day of De~em,ber9ftl1e,yearfor which the licericeis granted, or reneWed un<ier.J::ule 9: 80 8. Amendment 9f licence. - (1) A licence under rule 7>may be amended by the Chief Inspector. (2) A licensee shall be required to have his licence amended if' there is change. in the name of the factory or in the site on which the factory is situated or if the factory, for which the. licence is granted, exceeds the limits specified in the licence in regard to horse-power or the number of persons employed. The licensee whose licence is required to be amended shall submit it to the Chief Inspector with an appli­ cation stating the nature of the amendment and reasons thereof: Provided. that no amendment of the licence shall . be necessary in respect .of changes in tJ:1e number of . workers or horse-power or both unless such changes involve higher.licence or renewal fee. (3) Where a licence is required to be amended under sub-rule (2) the fee to be paid for such amend-· ment shall be equal to the difference .. between the licence or re.newal fees due on thebasis.of the higher number of workers and horsepower and the fees for the grant of licence or renewal thereof already paid for the y~ar.0r part thereof. ' - 9. Renewltl of licence. - (1) An application for the renewal of licence shall be imide to the Chief Inspector -in FormZ accompanied by a treasury re­ ceipt or an.invoice fQr book adjustment, as the case may be, for payment of the fees 'specified in the Schedule attached to rule 6 (2), so as to reach him not later than two months before the date on which the licence is due to expire: ProvidedJhat where a factory commences work on or after the 1st day. of November.in any year, appli­ cation for renewal of the licence shall be made on or before the 1st d;ty of January nextfolloWing. (2) (a) On receipt of the application under sub­ -rule (1), the ,Chief Inspe~tor may, if he is satisfied that there is no objection to the renewal' of ·the licence, renew the same for a period not exceeding one year 0, ,may,after recording his reasons, refuse the renewal thereof on any of the grounds specified in the proviso to sub~rnle (1) of rule 7. (b) The Chief Inspector may also refuse the rene­ wal of the licence on the ground that the applicant has been ,guilty ·of repeated contraventions of the provisions of the Act or these rules or both, or the applicant has o.btained the licence by fraud or by misrepresentation: Provided that, in any case falling . under clause (a) or (b) ,before refusing any licence, the applicant shall be given anopportunity to show cause why the licence should not be refused: Providea further that, where the application for the renewal of the licence is made after the expiry of the due :date specified in sub~rule (1), it may be renewed on payment.of an additional fee of 25 per cent of the fee payable for the renewal' of the licence. 10. When licence deemed to be granted or renewed. - Where' application for the grant or for renewal of licence is duly made' in accordance with these rules, the factory in respect of which the licence is to be grantedot renewed, as the case maybe, shall be deemed to be dnly licensed' until such licence is SERIES I No. Ii granted or renewed or until an intimation that the grant or renewal of the licence has been refused is communicated to such person. Explanation: "- For the purpose of this rule, an application,for the grant or renewal of a licence shall be deemed to have been duly made only if it is in the prescribed form and is filled in with all relevant particulars and further is accompanied by a treasury receipt or an invoice for book adjust­ ment, as the case may be, for payment of the fees in accordance with the Schedule annexed to rule 6. 11. Procedure on death ordisabiIity of licensee.- (1) If a licensee dies or becomes insolvent, the person carrying on the business of such licensee shall not be liable to any penalty under the Act for exercising the powers granted to the licensee by the licence during such time as may reasonably be required to allow him to make an application for the amendment of the licence under rule 8 in his own name for the unexpired' portion of the original licence. (2) Transfer of licence. -(i) The holder of a licence may, at any time before the expiry of the licence, apply for permiSSion to transfer his. licence to another person. (ii) Such application shall be made to .the Chief Inspector who shall, if he' approves of the trans­ fer, enter upon the licence, under his signature, an endorsement to the effect that the licence has been transrerred to the person nam~d. (iii) A fee of ten rupees shall be charged on each such application. 12. Loss of liCence. -(1) Where a licence granted under these rules is lost or destroyed, a duplicate thereof may be granted on payment of a fee of rupees five. . (2) The Chief Inspector may require a licensee to obtain a duplicate licence on payment of rupees five, if the original licence is defaced .or spoiled: Provideq. !hat, the Chief Inspector may issue a duplicate licence without charge if he .is satisfied , that there are good and sufficient reasons for doing so. 13. Mode of payment of .fees. "- (1) Every appli­ cation under these rules shall be accompanied by a treasury receipt Showing that the appropriate amount of fee has been paid into the local treasury under the head of account "087 - Labour and Employment, C-Fees realised under Factories Act, 1948". Provided that, in the case of a Government fac­ tory" the payment of the appropriate amount of fees shall be made in the same manner as payments of amounts due by, one Government Department to another are ordinarily made. (2) If an application for the grant, renewal· or amendment of a licence is rejecteq, the fee paid shall be refunded to the applicant. . (3) Where such application is granted, any amount paid by the applicant in excess of the prescribed fee shall be refundable only after the expiry· of one year from the. date of such grant or the same may be 3RD MAY, 1985 (VAISAKA 13,1907) adjusted against payment of any fees due for the next succeeding year. 14. Suspension of licence on request of IicellSOO;­ (1) If before the 31st October of any year an occu­ pier notifies his intention in ~iting to the Chi,:f In~~ pector that during the followmg year the premIses m respect of which licence is issued will not be used for the working of the factory, the Chief Inspector may suspend the licence granted In respect of such factory. (2) A licence suspended under sub-rule (1) may be revived on receipt of an application for renewal in Form 3 accompanied by the licence, for the remaining part of the year, on payment of a sur­ charge of' 10 per cent in addition to the fees speci­ fied in these rules. Form prescribed under sub-section{l) of ,section 7. 15. Notice of .occupation. - The notice' of occupa, tion shall be in Form 2. ' 16. Notice of change of manager. - Notice of change of manager shall be in Form 5. CHAPTERTI·. THE INSPECTING STAFF Rule prescribed under sub-section (I) of Section 8: 17. Appointment of Inspectors. - No person shall be appointed as Inspector for the purposes of the Act, unless he possesses the qualifications as pres­ cribed for such Inspectors by any general or special order of the Government at the time of his appoint­ ment. Rules prescribed under Section 9: 18. Powers of Inspectors;- An Inspector shall, for the purpose of the execution of the Act, have power to do all or any of the following things, that is to say:- (a) to photograph any worker,to inspect. exa­ l11ine, measure, copy, photograph"sketch or test, as the caSe' may be, any building or room,any plant, machinery, appliance or apparatus; any register or document or anything' provided for the purpose of securing the health, safety or welfare of the workers employed in a factory; , (b) in the case of an Inspector who is a duly qul1lified medical practitioner to carry out such medical llxaminations as may be necessary for the purposes of his duties under the Act; (c) . to prosecute, conduct or defend before a Court any complaint, or other proceeding arising under the Act or in discharge of his duties as an Inspector: Provided that the powers of the Additional Ins­ pectors shall, unless otherwise expressly provided in the notification under sub-section (5) of Section 8, be limited to the inspection of factories in respect of the following matters, namely:- Cleanliness (Section 11), over-crowding (Sec­ tion 16), lighting (Section. 17), drinking water (Section 18), latrines and urinals (section 19), spittoons (section .20), precautions in the case of 81 fire (section 38), welfare (Chapter V), working hours of adults (Chapter VI -exc.ept thl) power of exemption, under the proviso to section '62), employment of young personS (Chapter Vll), leave with wages (Chapter VITI) and display of notice (section 108): Provided further that all Additional, Inspectors shall report the defects found and remedies suggested for enforcing compliance with requirements of sec­ tions referred to above, to the Chief Inspec~or who shall pass final orders in each case. Rule pres~ribed under sub:section (4J .of'S~clionIO: 19. Duties of.Certifyjng Surgeon.-(l) . FOi'the purposes oftheexaminationan~ ce.rtIt:i<:ationof young persons who wish tO,ob,taln certifIcates of fitness, the Certifying Surgeon;sh.allarrange a sui­ table time and place for the attendance, of such persons, and shali give previousnoticeiri writi!,g of such arrangements to the manager of fa~torIe:;; situated within the. local liinits assigJled to hIm. . (2) The Certifying Surgeon'shiWi,issrie his certi­ ficates in Form 6. The foil and coimterfoil shall be filled: in and the signature or the left thumbimpres­ sion of the person in whose name, the certificate is granted shall be taken on them. On,being satisfied as to the correctness of the entries made therein alid of the fitness of the person examined, he shall sign the foil' and initial the counterfoil and shall. deliver the foil to the person in whose name the certificate is granted. The foil so delivered shall be' the certi­ ficate of fitness granted, under section 69. All comiterfoils shall be kept by the Certifying Surgeon for a period of' at least 2yearsafter the issue. of the certificate. . . (3) If a certificate of fitness issued to a young person is lost, on receipt of an application. for the grant of a duplicate, the Certifying Surgeon, after making such' enquiries as he deems fit, may grant a duplicate thereof. Such aPplication shall be for­ warded: through the occupier of th¢ factory ,,[here the yoimgpersonisemployed.·· . ' (4) (a) A fee of rupee one shali be payable for the issue of every certificate of fitness issued under sub-rule (2) 'and shall be paid by the occupier; . (h) ',.A fee'dffiftypaise shall be payabl~ foX-the issue of every duplicate of a certificate i,ssued under sub-rule (2) and .shall be paid by;the occupier. (5). The. Cect.ifyiug Surgeon shai(Upou' request I;>y the. Chief Inspector, carry out'suchexaminat~on and furnish him with such report as.he ma.y in:dicate; for any factory or class or descriiWdii. of factories where- ..., (a) cases of illness have occurred Which it is reasonable to believe are due to the nature of the manufacturing process carried on or . other con­ ditionsof work prevaiIin:g therein; or (b) by reason of any changehl 'ilie manufactur­ ing process carrie.d on,. or in: the . substances used therein, or by reasons of. the adoption of·any new manufacturing pI:ocess or of any. new substance for use in a manufacturing ProM,ss, there is a likelihood of. injury to the health of workers employed in that manufacturing process; or __ --C-__ .. _._ 82 (c) young persons are, or are about to be, em­ ployed in any work which is likely to cause injury to their health. (6) For the purpose of the examination of persons employed in processes covered by the rules relating to dangerous operations, the Certifying Surgeon shall visit the factories within the local limits assig­ ned to him at such intervals as are prescribed by the rules relating to such dangerous operations. (7) At such visits the Certifying Surgeon shall examine the persons employed in such processes and shall record the. results of his examination in a re­ gister known as the health register (Form 7) which shall be kept by the factory manager and produced to the Certifying Surgeon at each visit. (8) If the Certifying Surgeqn finds as a 'result of his 'examination that any person employed in such process is no longer fit for medical reasons to work in that process, he shall suspend such person from working in that process for such time as he may think fit and no person after suspension shall be em­ ployed in that process without the written sanction of th~ Certifying Surgeon in the health register. (9) The manager of a factory shall afford to the Certifying Surgeon facilities to inspect any' process in which any person is employed or is likely to be .employed. (10) The manager of a factory shall provide for the purpose of any medical examination which the Certifying Surgeon wishes to conduct .at the factory (for his exclusive use on the occasion of an exami­ nation) a room which shall be properly cleaned and adequately ventilated and lighted and furnished with a screen, a table (with writing materials) and chairs. CHAPTER ill HEALTH . Exemptions under sub-section (2) of Section 11: 20. Cleanliness of walls and ceilings. - (1) Clause (d) of sub-section (1) of section 11 of the Act shall not apply to the class or description of the factories or parts of factories specified in the Sche­ dulehereto: Provided that they are kept in a clean state by washing, sweeping, brushing, dusting, vaccum­ -cleaning or other effective means: Provided further that the said clause (d) shall continue to apply- (i) . as' tespects factories or' parts of factories specified in Part A of the said Schedule, to work­ -rooms in which the amount of cubic space aliowed for every person employed in the room is less than 15 cu. metres; . (ii) as respects factories or parts of factories specified in Part Bof the said Schedule, to work­ -rooms in which the amount of cubic space allowed for every person employed in the room is less than 75 cu. metres; . . (iii) to engine-houses, fitting-shops, lunch­ -rooms, canteens, shelters, creches, cloak rooms, rest rooms and wash-places ; and (iv) to sucll parts of walls, sides and' tops of passages and staircases as are less than six metres above the 'floor or stair. SERIES I No.5 (2) If it appears to the Chief Inspector that any part of a factory, to which by virtue of sub-rule (1) any of the provisions of the said clause (d) do not apply, or apply as varied by sub-rule (1), is not being kept in a clean state, he may by written notice require the occupier to White-wash or colour-wash, wash, paint or varnish' the same and in the' event of the occupier failing to comply with such requi~ sition within two months from the date of the notice, sub-rule (1) shall cease to apply to such part of factory, unless the Chief Inspector otherwise deter­ mines. Blast furnaces. SCHEDULE PART-'--A Brick and tile works in which unglazed bricks or tiles· are . made. Cement works. Chemical works. Gas works. Iron and steel mills. Stone, slate and marble works. The following parts of factories:- Rooms used only for the storage of articles. Rooms in which the walls or ceilings consist of galvanised iron, glazed bricks; glass, slate, as­ bestos"bamboo, .thatch. Parts in which dense steam is' continuosly evol­ ved in the process. . - . .. Parts in which pitch, tar or like'material is ma­ nufactured or is used to a substantial extent, ex­ cept in brush works. The parts ofa glass factory known as the glasshouse. Rooms in which gra­ phite is manufactured or is used to a substantial extent in any process . Parts in. which coal, coke, oxide or iron, ochre, lime or stone is crushed on ground. Parts of walls, particulars, ceilings or tops of rooms which are at least seven metres above the floor. Ceilings or tops of rooms in print works, bleach works or dye works with 'the exception .. of finishing rooms or warehouses. Inside walls of oil mills below a height of 1.5 metres from the ground floor level. Inside . walls in tanneries below a height of 1.5 metres from the ground floor level where a wet process is carried' on. PART-B Coach and -motor body works. Electric generating or transforming stations .. Engineering works •. Factories in which sugar is refined or manufactured. Foundaries other than foundaries in which brass casting is carried on. Ship-building works. Those parts of factories where Unpainted or.unvar. nished wood is manufactured. ·3RD MAY, 1985 (V AISAKA 13, 1907) 83. ------~----,----------~--~-------------------------------------------- Register prescribed under sub-section [1) of Section 11: 21. Record of white-waShing, ete. -- The record of ·dates on which white-washing, colour-washing, var­ nishing, etc., are carried out shall be entered in a register maintained in Form 8. Rule prescribed under sub-section (1) of Sedion 11 and Section 12: 22. Compound to be kept clean. -- The compound surrounding every factory shall be maintained in a -Sanitary and clean condition free of rubbish, filth or debris. . :Rule p,escribed under sub-section (2) of Section 12: 23. Disposal of trade wastes lind effluents. ~(1) In the case of a factory where the drainage' system . is proposed to be connected to the public sewerage "system, prior approval of the arrangements made -shall be obtained from the local authority. (2) In the. case of factories other than those men; tioned in sub-rule (1), prior approval of the arrange­ . ments made for the disposal of . trade wastes and ,effluents shall be obtained from the Public Health authorities 'or such authority as the State Govern­ ment may appoint in this behalf. :Rule prescribed under Section 13: 24. Ventilation and tempernture. -- (1) In any factory the maximum wet-bulb temperature of air in a work-room at a height of 1.5 metres above the 'floor level shall not exceed 30 degrees centigrade and adequate air movement of, at least 30 metres per minute shall be provided; and in relation to dry­ , bulb temperature, the wet-bulb temperature in the workroom. at the said height shall not exceed that shown in the Schedule annexed hereto, or as regards a dry-bulb reading inteJc:IDediate, between the two ,ilry-bulb readings, that specified in relation to the .higher of these two dry.bulb readings: , SCHEDULE Dry-bulb temperature 3()<>C to 34'C 35"C to 39"C 40'C to 44'C 45'C to 47'C VVet-bulb tenaperature 29'C 28.5'(j 28'C 27.5'C Provided that if the temperat1,ll'e measured with 'a thermometer inserted in a hollow globe of 15' centi­ metres diameter coated mat black outside and kept in the environment for Jl,ot leSs than 20 minutes exceeds the dry-bulb temperature of air, the tempe- ,rature so recorded by the globe thermometer Shall be taken in place ,of the dry-bulb temperature: Provided further that when the reading of' the wet-bulb temperature outside in the shade' exceeds 27 degrees centigrade, the value of the wet-bulb temperature allowed in the Schedule for a given dry-bulb temperature may 'be correspondingly ex­ ,ceeded to the same extent: Provided further that this requirement shall not apply in respect of factories covered by section 15 in ' respect of factOries where the nature of work carned on involves production of excessively high tempera­ ture referred to in cla.use (ii) of sub-section (1) to which workers are exposed for short ,periods of time not exceeding one hour followed by an interval of sufficient duration in thermal environments not exceeding those otherwise laid down in this rule: Provided further that the Chief Inspector, having due regard to the health of the workers, may in special and exceptional circumstances, by an order in writing' exempt any factory or part of a factory from the foregoing requirement, in. so far as restrict­ ing the thermal conditions within the limits laid down in the Schedule are concerned, to the extent he may consider necessary subject to such conditions as he may specify. ' (2) (a) If it appears to the Inspector that in any factory, the temperature of air in a workroom 'is sufficiently high and is likely to exceed the limits prescribed . in sub-rule . (1), he m~y serve on, the manager· of the factory· an ord,er requiring him to provide sufficient number of whirling hygrometers or any other type of hygrometers and direct that the· dry-bulb and. wet-bulb readings in each such workroom shall be recorded at' such positions as approved by the Inspector, twice during each work­ ing shift by a person especially nominated for the purpose by the manager, and approved by the Inspector. (b) If the Inspector has reason to believe that a substantial amount of heat is added inside the envi­ ronmentofa workroom by radiation from walls, roof or other solid surroundings, he may serve on the manager of the factory an order requiring him to provide oneoi' ·more globe thermometers referred to in the first proviso in sub-rule (1) and further requiring him to place the globe thermometers at places specified by him and keep a record of the temperatures in a suitaJ:ile regiSter. (3) (a) IIi every factory the amount of ventilating openings in a workroom below 'the eaves shall, except where mechanical means of ventilation as required by ClauSe (b) below are provided, be of an aggregate area of not less than 15% of the floor area and. Shall be so located as to afford a continued supply of fresh air: Provided that the Chief Inspector may relax the , requirements regarding the amount of ventilating openings if he is satisfied that having regard to the location of the factorY, orientation of the workroom, prevailing winds, roof height· and the nature of manufacturing process carried on, sufficient supply of fresh air into the workroom is afforded during most of the part of the working: Provided further that this r"quirement shall not apply in respect of workrooms of factories-- (i) covered by section 15; or (ii) in which temperature and humidity are controlled by refrigeration. (b) Where in any factory owing to special cir­ cumstances such as situation with resnect to adia-, cent buildings and height of the building with reS­ pect to floor space, the requirements of ventilation openings under clause (a) of this sub-rule cannot , be complied with or in the opinion of the Inspector the temperature of air in a workroom is sufficiently high and is :likely to exceed the . limits prescribed in. sub-rule (1), he may serve on the manager of the factory an' order requiring him to provide additional ventilation either by means of roof ventilators or by mechanical means. (c) The amount of fresh air supplied by mecha­ nical means of ventilation in an hour shall be equi­ valent to at least six times the cubic capacity of the workroom and shall be distributed evenly throughout the workroom without dead airpockets or . undue droughts - caused by high inlet velocities. (d) In regions where in summer (15th March- 15th July) dry-bulb temperatures of outside air in the shade during most part of the day exceed 35 degrees centigrade and simultaneous wet-bulb tem­ peratures are 25 degrees centigrade or below and in the opinion of the Inspector the manufacturing process carried on in the workroom of af;tctory permits thermal environments with relative hw;nidity of 50% or more, the Inspector may serve :On the manager of the factory an order to have sufficient supply of outside air for ventilation cooled by pass­ ing it through water sprays either by means .ofunit type of evaporative air coolers (desert cooloo:s) or, where supply' of outside air is provided by mC(l'hanical means through ducts in a plenum system, by ·means of central air washing plants. Rules 25 to 35 prescribed under sub-section (1) of Sec­ tion 15: 25. When artificial humidification not allowed_­ There shall be no artificial humidification in any room of a cotton spinning or weaving factory- (a) by the use of steam during any period. when the dry-bulb temperature of that room .exceeds 29.5 degrees centigrade; and (b) at any time when wet-bulb reading of the hygrometer is higher than that specified in the fonowing Schedule in relation to the dry.obulb reading of the hygrometer at that time; .or as regards a dry-bulb reading intermediate between any two dry-bulb readings indicated consecutively in the Schedule. when the. dry-bulb reading does not exceed the wet-bulb reading to .the extent indicated in relation to the lower9f these two dry-bulb readings:- . SCHEDULE 'Reading in degrees centigrade Dry-bulb Wet-bulb Dry-bulb Wet-bulb Dry-bulb Wet-bulb 15.5 14.5 25.0 24,0 34.5 30.0 16.0 15.0 25.5 24.5 35.0 30.5 16.5 15.5 26.0 25.0 35.5 m.o 17.0 16.0 26.5 25.5 36.0 31.0 17.5 16.0 27.0 26.0 36.5 31.5 18.0 16.5 27.5 26.0 37.0 31.5 18.5 17.0 28.0 26.5 37.5 31.5 19.0 18.0 28.5 27.0 38.0 32.0 19.5 18.5 29.0 27.0 38.5 32.0 20.0 19.0 29.5 28.0. 39.0 32.0 20.5 19.5 30.0 28.0 39.5 32.5 21'.0 20.0 30.5 28.5 40.0 32.5 21.5 20.5 31.0 28.5 40.5 33.0 22.0 21.0 3:1.5 29.0 41.0 33.0 SERIES I No .. 5 Reading in degr.ees ,centigrade Dry-bulb Wet-bulb Dry-bulb Wet-bulb Dry-bulb Wet-bulb 22.5 21.0 32.0 29.0 41.5 33.0 23.0 21.5 32.5 29.0 42.0 33.0 23.5 22.0 33.0 29.5 42.5 33.0 24.0 23.0 33.5 29.5 43.0 33.5 24.5 23.5 34.0 30.0 431.5 33.5 Provided, however, that clause (b) shall not apply' when the difference between the wet-bulb tempe­ rature as indicated by the hygrometer in the department concerned and the wet-bulb temperature taken. with a hygrometer outside in the shade is less than 2 degrees. 26. Provision of hygrometer. - In alI departments. of cotton spinning and weaving miIIs wherein arti­ ficial humidification is adopted, hygrometers shan be provided and maintained in such positions as are approved by the Inspector. The number of hygro­ meters shall be regulated according to the following scale: - (a) Weaving department- One hygrometer for departments with' less than 500 looms, and one additional hygrometer . for every 500 or part of 500 looms in excess· of 500. (b) Other departments- One hygrometer for each room of less than 8500 cubic metres .capacity and one extra hygro­ meter . for each 5670 cubic metres or part thereof, in excess of this. , (c) One additional hygrometer shan be pro­ ,vided and maintained outside each cotton spin­ ning and weaving factory wherein artificial humi­ dification is adopted, ani! in a position approved by the Inspector,· for taking hygrometer shade readings . 27. Exemption from maintenance of hygrometers •. - When the Inspector is satisfied that the limits of humidity anowed by the Schedule to rule 25 are never exceeded, he may, for any 'department. other than the weaving department, grant exemption from the maintenance of the hygrometer. The Ins­ pector shan· record such exemption in writing. 28. Copy of Schedule to rule 25 to be affixed near­ every hygrometer. - A legible copy of the Schedule to rule 25 shall be affixed near each hygrometer. 29. Temperature to be recorded at each hygro­ meter. - At each. hygrometer maintained in accord-­ ance with rule 26, correct wet and dry·bulb tem· peratures shall be recorded thrice daily during each working day by. competent persons nominated by the manager and approved by the Inspector. The temperature shall be taken between 7 a. m. and 9 a. m., between 11 a. m. and 14 p. m. (but not in the rest interval) and between 16 p. m. and 3RD MAY, 1985 (VAISAKA 13, 1907) 17.30 p. m. In exceptional circumstances, such additional readings and between such hours as the Inspector may specify, shall be taken. The teinpe­ rature shall be entered. in Humidity Register in Form 9, maintained in the factory. At the end of each month, the persons who have taken the readings shall sign the Register' and certify in the Register the correctness of the entries. The register shall always be available for inspection by the Ins­ pector. 30. Specifications of hygrometer. - (1) Each hygrometer shall comprise of two mercurial thermometers of wet-bulb and dry-bulb of similar construction, and equal in dimensions, scale and divisions of scale. They shall be mounted on a frame with a suitable reservoir containing water .. (2) The wet-bulb shall be closely covered with a single layer of muslin, kept /wet by' means of a wick attached to it and dropping into the water' in the reservoir. The muslin covering and the wick shall be suitable for the purpose, clean and free from size or grease. (31) No part of the wet-bulb shall be within 76 millimetres from the dry-bulb or less than 25 mitli­ metres from the snrface of the water in the reservoir and the water reservoir shall be below it on the side of it away from the dry-bulb. ' (4) The bnlb shall be spherical and of snitable dimensions and shall be freely exposed on all sides to. the air of the room. (5) The bores of the stems shall be such that the position of the top of the mercury column shall ,be readily distinguishable at a distance' of 60 cen­ timetres. (6) Each thermometer shall be gradnated so that ,accurate readings may be taken between 10 and 50 degrees centigrade. . (7) Every degree from 10degJ;eesupto 50 degrees shall be clearly marked by horizontal lines on the stem, each fifth .degree s!tall be marked by longer marks than the mtermediate degrees and the tem­ perature marked opposite each fifth degree, i. e. 10, 15, 20, 25, 30, 35, 40, 45, 50. .' (8) The markings asaboye shall be accurate, that IS to say, at no temperature' between 10 and 50 degrees shall the indicated readings be in error by more than one ninth of a degree. (9) A distinctive number shall be indelibly marked npon the thermometer.' , (10) The accuracy of each thermometer' ,shall be certified by the National Physical Laboratory, Delhi, or . some competent authority appointed by the ChIef, Inspector and such certificate shall be attached to the humidity register. 31. Thermometers to be mainmined in efficient order. - Each therniometer shall be maintained at all times during the period of employment in effi­ cient working order, so as to give accurate indi­ cations and in 'particular- (a) the wick and the muslin covering of the wet-bulb shall be renewed once a week; , 85 (b) the reservoir shall be filled with water which shall be completely renewed once a'day. The Chief Inspector may direct the use of distilled water or pure rain water in any particular mill or mills in certain localities; and (c) no water shall be applied directly to the wick or covering during the period of employment: 32. Inaccurate thermometer not. to be used with­ out fresh certificate. - If an Inspector gives notice in writing that a thermometer is not accurate, it shall not, after one month from the date of such notice, be deemed to be accurate unless and until it has been re-examined as prescribed and a fresh certificate obtained which certificate shall be kept attached to the humidity register. 33. Hygrometer not to be affixed to wall, etc. unless, protected by wood. - (1) No hygrometer shall be affixed to a wall; pillar, or other surface unless protected therefrom by wood' or other non-conduct­ ing material of at least 12 millimetres in thickness and at a distance of at least 25 millimetres from' the bulb of each thermometer. (2) No. hygromyter shall be fixed at a height of more than 170 centimetres from the floor to the top of thermometer stem or in the direct draughts from a fan, window or ventilating opening. 34. No reading to be taken within 15 minutes of renewal of water. -, No reading shall be taken for record on 'any hygrometer within 15 minutes of the renewal of water in the reservoir. . 35. How to introduce steam for humidification.­ In any room in which steam pipes are used for the introduction of steam for the purpose of artificial humidification of the air, the following provisions shall apply:- (a) the diameter of 'such pi:p~s shall not exCeed 50 millimetres and in the case of pipes installed after 1st day .of January 1950, the diameter shall not exceed 25 millimettes; (b) such pipes shall be as short as are reasonC ably practicable; (c) all hangers supporting such pipes shall be separated from the bare pipes by an efficient insulator not less than half an inch in thickness; (d) no uncovered jet from such pipe shall pro­ ject more than 11.5 centimetres beyond the outer surface of any cover; , (e) the steam pressure shall be as low as practi- cabl~ and' shall not exceed 5 kilograms per square centImetre; and ' . (f) the pipe employed for. the introduction of steam into the air in a department shall be effecti­ vely covered with such non-conducting material, as. ':la~ be approved by the Inspector in order to mmImIse the amount 'of heat radiated by them into the department., , ' , ' Rules 36 to 40 prescribed under Sub-section (4) of Section 17. 36. lighting application and commencement_­ Subject to, the provisions as contained hereunder, . rules 36 to 40 shall apply to factories in which 86 persons are being regularly employed in a manu­ facturing process or processes for more than 48 hours a week, or in shifts, provided that nothing in these rules shall be deemed to require the provi­ sion of lighting of a specified standard in any build­ ing or structure so constructed that, in the opinion of the Chief Inspector, it would' not,·be reasonably practicable to comply with such requirement. 37. Lightmg of interior pa;rl&.- (1) The general illumination over those interior parts of a factory where persons are regularly employed shall be not less than 65 lux measured in the horizontal plane at a level of 90 cms. above the floor. Provided that in any such parts in which the 'mounting height of the light source or general illu­ mination necessarily exceeds 7.6 metres measured from the floor or where the structure of the room or the position or construction of the'fixed machi­ nery or plant prev!lnts the uniform attainment of this standard, the general illumination at the said level shall be not less than 22 lux and where work is actually being done the illumination shall be not less than 65 lux. (2) The illumination over all other interior parts of -the factory over which persons employed pass shall, when and where a person is passing, be not less than 5 lux at floor level. SERIES I No. 5 (3) (i) In every factory, where natural lighting is not such that day light conditions are fairly uniform over the working or other areas and/or. day-light illumination is not sufficient, additional lighting, which shall be of uniform level, widely distributed to avoid hard shadows or strong con­ trast .and free from direct or reflected glare, shall be provided. The minimum intensity of illumination for the different areas and work-rooms of the type given under column No. 2 shall be as given under column No.3 of the Schedule 'A' appended hereto; (ii) Notwithstanding the above, in every factory, where intense local lighting is further necessary on account of the nature of work as mentioned ili the column No. 2 of the Schedule 'B' appended hereto, the same shall be obtained by a combination of general lighting and supplementary lighting at the point of work. The minimum intensity of illumina­ tion for different tasks shall be as given under column No.4 of the said Schedule. (iii) In case of any doubt or dispute in regard to the classification of areas or tasks specifically men­ tioned in Schedule 'A' or corresponding to the examples mentioned in Schedule 'B' respectively, the decision of the Chief Inspector of Factories shall be final. SCHEDULE 'A' Sr. No. Are'as and work-room Minimum intensity of illumination in Lux 1. Stock-yards, main entrance. and exit roads, cat-walks of outdoor plants, coal unload- 20 ing and s;:orage areas. 2. Passage-ways, corridors and stairways, warehouses, stock-rooms for large and bulky 50 materials, platforms of outdoor plants, basements. 3. Engine and boiler rooms, passengers and freight elevators, conveyers crating and 100 boxing departments, store-rooms and stock-rooms for medium and fine materials, lockers rooms, toilet and wash rooms. Sr. No. Nature of work 1 2 1. Where discrimination of detail is. not essential '2. . Where slight discrimination detail is essential . 3. Where moderate discrimination of detail is essential SCHEDULE 'B' Examples 3 Minimum intensity of illumina .. . tion in Lux 4 Handling of material of coarse nature, rough sort- 50 ing, grinding of clay products; handling coal or ashes. . Production of semifinished iron and steel products, 100 rough assembling, milling of grains, opening, carding, drawing, slubbing, roving, spinning (ordi- nary) counts of cotton.' . Medium assembling, rough bench work and machine 200 work, inspection and testing of products, canning, - sewing, venering planning of lumber, sewing of light coloured textiles and leather products, weaving light thread, warping, slashing dOubling (fancy) spinning fine counts. . .SED MAY, 1985 (VAISAKA 13, 1907) 87 1 2 3 4 4. Where close discrimination of de­ tails is essential Medium bench, and machine' work fine testing, 300 flour grading, leather finishing, weaving cotton goods or light coloured woolen goods, welding sub-assembly, drilling, rivetting, book-binding and folding. .5. Where discrimination of fine detail is involved under a fair degree of contract for long periods of time. Fine assembling, fine bench and machine work, fine 500 inspection, fine polishing. and bevelling of' glass, fine wood working, weaving dark coloured woolen goods. .' ',6. Where discrimination of extremely fine detail is involved under condi­ tions of extremely poor contrast for long periods of time. Extra fine assembling, extra fine inspection, testing 1,000 of extra fine instruments, jewellery and watch manufacturing, grading and working of tobacco products, dark cloth hand tailoring, final perching in dye works, make'up and proof-reading in print~ ing plants. . (4) The standard specified in this rule shall be without prejudice to the provision of any additional' illumination required to render the lighting suffi~ ·cient and suitable for the nature of the work. 38. Prevention of glare. - (1) Where any source of artificial light in, the factory is less than 4.9 me­ tres above floor level, no part of the light source or of the lighting fitting having a brightness greater than 1.55 candles per sq. centimetre shall be visible to persons whilst normally employed within 30 metres of the source except where the angle of elevation from the eye to the source or part of the fitting,. as the case may be exceeds 20". (2) Any local light, that is to say, an artificial light designed to illuminate particularly the area or part of the area of work of a single operative or ·small group of operatives working near each other, shall be provided with a suitable shade of opaque material to prevent glare or with other effective means by which the light source is completely screened from the eyes of every person employed at a normal working place, or. shall be so placed that no such person is exposed to glare therefrom. , 39. Power of Chief Inspector to exempt. - Where the Chief Inspector is satisfied in respect of any particular factory or part thereof or in respect of any description of workroom or process that any requirement or rules 37 and 38 is inappropriate or is not, reasonably practicable, he may by order in writing exempt the factory or part thereof, or des­ cription of workroom or process from such require­ ment to such extent and subject to such conditions as he may specify. . 40. Exemption from rule. 37.- (1) Nothing in rule 37 shall apply to the parts of factories specified .in Part I of the Schedule annexed hereto. (2) Nothing in sub-rule (1) oj; rule 37 shall apply to t!t~ f8:ctories or parts of factories respectively specifIed ill Part II of the said Schedule. ' SCHEDULE PART I P~ of fac.tories· in which light sensitive photo­ 'graphIC matenals are made or used in an exposed condition or where such exposing operations are' carried on. PART II Cement' works. 'Works for the crushing and grinding of lime- stone. Gas works. Coke oven works. Ehictrical stations. Flour mills. Maltings and breweries. Parts of factories in which the following processes are carried on: - . . , . Concrete or artificial stone making. Conversion of iron into steel. Smelting of iron ore. Iron or steel rolling. . ' . Hqt rolling or forging, tempering or annealing of metals. Glass blowing and other working in molten glass. Tar distilling. Petroleum refiuing and blending. '. Rules 41 to 46 prescri/:>ed under Sub-section (I) of Section 18. , ~1 .. Quantity o(drinking ~ater. - The quantity of drInkmg water ,to be prOVIded for the workers in every factory s~all be at least five litres a day per worker employed ,in the factory and such drinking water shall be readily available at all times during working hours. 42. Source of snpply.-The water provided for drinking shall be supplied - . (a) from the taps connected with a public water supply system, or . . (b) from any other source approved in writing by the Health Officer. 43 .. Sto~ge ,of water. - If drinking water is not supphed directly from taps either connected with public ·water supply system or, any other water supply sy:stem of the factory approved by the Health OffIcer,. It shall be kept in suitable vessels, recep­ tacles or tanks fitted with taps and having' dust ' 88 proof covers, and placed on raised stands or plat­ forms in shade and having suitable arrangement of drainage to carry away the waste water. Such ves­ sels, receptacles or tanks shall be kept clean and the water renewed at least once every day. AIl practi­ cable measures shaII be taken to ensure that the water is free from contamination. 44. Cleanliness of wells or :reservoir. - (1) Drink­ ing water shall not be supplied from any open well or reservoir unless it is so constructed, situated, Drotected and maintained as to be free from the Possibility of pollution by chemical or bacterial and extraneo)lS impurities. (2) Where drinking water is supplied from such well' or reilervofr the water in it shall be sterilized once a week or more frequently if the Inspector by written order so requires, and the date on which sterilising is carried out shall be recorded: Provided that this requirement shall not· apply to any such well or reservoir if the water therein is filtered and treated to the satisfaction of the Health Officer before it is supplied for consumption. 45. Report from Health Offioor.-The Inspector may by order in writing, direct the manager to obtain, at such time or at such intervals as he may direct, a report from the Health Officer as to the fitness for human consumption of the water supplied to the workers and in every case to submit to the Inspector a copy of such report as soon as it is received from the Health Officer. 46. water Centres. - In every factory wherein more than' 250 workers are ordinarily employed- (a) the drinking water supplied to the workers shall from the lst of November of every year to 31st May of the succeeding year be cooled by ice or other effective method: . Provided that if ice is placed in the drinking water, the ice shall be cleaned and wholesome and shall be obtained only from a source approved in writing by the Health Officer. (b).(i) the cooled drinking water shall be sup­ plied in every canteen, lunch-room and rest'room and also at conveniently accessible points through­ out the factory which for the 'purpose of these rules shall be called "Water Centres". (li) at least one such water centre shall be pro­ vided on each floor if the factory has more than one floor; . (c) the "Water Centres" shall be sheltered from the weather and adequately drained; (d) (i) the number of "Water Centres" to be provided shall be. one "Water Centre" for every 150 workers or part thereof employed at anyone time in the factory. Provided that in the case of. a factory where the number of persons employed exceeds 500, it shall be sufficient if there is one "Water Centre" as atoresaid for every 150 persons up to the first 450 and one for every 450 persons or part thereof thereafter, and in counting the number, . account SERIES I No. 5 shall be taken of the maximum number of workers working at any time during the day. (ii) where drinking water is provided through taps or through drinking fountains each "Water Centre" shaII have at least three such taps or fountains. The taps or fountains shall be at least 60 cms. apart, .and shall have a trough to drain away the waste water. The trough and the walIs and platform near, the tap 'shall be laid in glazed tiles; , Provided that where mechanical refrigerating units with drinking water fountains distributed throughout the factory, are provided, the number ,of "Water Centres" may not be according to the standards prescribed under sub-clause (i) above, as long as the total number of fountains provided is in accordance with the prescribed standard that is the number of "Water Centres" as prescribed in sub:clause (i) were provided; (e) (i) every "Water Centre" shall be maintained in a clean and orderly condition; (li) every "Water 'Centre" shall be in charge of a suitable person who shall distribute the water and who Shall be provided with clean clothes while on duty: Provided that in respect of factories where mechanical refrigerating units and taps are pro­ vided to the satisfaction of the Chief Inspector, he may exempt such a factory on an application made by the manager from the provisions of sub­ -clause (ii) ,on such conditions as he may deem fit .. Rules 47 to 56 prescribed under,Sub-section (3) of Section 19. 47. Latrine accommodations_ - Latrine accommo-' dation .shall be provided in every factory on the fol­ lowing scale: - , (a) where females are employed, there shall be' at least one latrine for every 25 females;' (b) where males are employed, there shall be· at least one latrine for every 25 males: Provided that where the number of males employ­ ed exceeds 100, it shall be sufficient if there is one, latrine for every 25 males upto the first 100, and one for every 50 thereafter. In calculating the number of latrines required under this rule, any odd number of workers less., than 25 or 50, as the case may be, shall be reckoned as 25 or 50 and the number of workers to be consi- . dered shall be the maximum number employed at . any time during the day. ' 48. Privacy of latrines. - Every latrine shall be under cover and so partitioned off as to provide privacy, and shall have a 'proper door and fastenings. 49. Sign-boards to be displayed. -Where workers' of both sexes are employed, there shall be, displayed outside each latrine block a notice in the language . 'understood by' the majority of the workers "For' Men Only" and "For Women Only", as the case may be. The notice shall alsq bear the figure of ,a man or of a woman, as the case may 'be. 3RD MAY, 1985 (V AlSAKA 13, 1907) 50. Urinal accommodation. ~ Urinal· accommoda-, tion shall be provided for the use of male workers and there shall be at least one urinal of not less than 60· centimetres' in length for every 50 males: Provided that where the number of males employed exceeds 500, it' shall be sufficient if there is. one urinal for every 50 males upto the first 500 employ­ ed, and one for every 100 thereafter. In calculating the urinal accommodation required under this rule, any odd number of workers less than 50 or 100 as the case may be, .shall be reckoned as 50 or 100. ' . 51. Latrines and urinals to conform to public health requlrements. - Latrines . and. urinals 'Other than those connected with an efficient water bDrne . sewage system, shall comply with, the'reqt,Iirements of the Public Health AuthDrities. 52. ·CerUtin latrines and urinals .to be. connected to sewerage system. - When any general system 'Of undergrDund sewage with an assured water supply fDr any particular locality is prDvided in a munici­ pality, all latrines and urinals 'Of a factDry situated in s'(lch locality shall, if the factory is situated within 30· metres of an existing sewer, be connected with that sewerage system.: .' 53. White-waShing, colour-washing of latrines and urinals. - The walls, ceiling and partitiOn of ,every latrine and uriqal shall be whitecwashed Dr colDur­ -washed and' the white-washing Dr' colour-washing shall be repeated at least 'Once in every four mDnths. 'The dates on which the white-washing or colour­ -washing is carried 'Out shall be entered in the pres­ cribedregister in Form 8: PrDvided that this rule shall not apply tD latrines . and urinals, the walls, ceilings Dr partitions of which are laid in glazed tiles or 'Otherwise finished tD pro­ vide a,smooth, polished imperviDus surface and that they are washed with sultable detergents and dis­ infectants at least 'Once in every four months. . . '. .-, 54. Construction and maintenance of drains.­ All drains carrying waste or sullage water shall be constructed in masDnry Dr other impermeable mate­ rial and shall be regularly flushed and the effluent disposed, off. by connecting such drains with a sui­ table drainage line: Provided that, where there is no such drainage line, the effluent shall be deodorized and rendered innocuous and then disposed 'Off in a suitable maimer . to the satisfaction of the Health Officer. 55: Water taps in latrines. -(1) Where piped water supply is . available, a sufficient number of water taps; cDnveniently accessible, shall be provided in Dr near such latrine accommodatiDn. (2) If piped water supply is not available, suffi" cient quantity 'Of water shall be kept stored in sui­ table receptacles near the latrines. 56. Number of Sweepers.-"-In every factory em­ ploying number of WDrkers' in any shift as shDwn in column nD. 2.Df the Schedule appended heretD, there shall be. employed at least a number of full . tiine/part time sweepers as ShDwn in cDlumn nD. 3 89 of the said Schedule" In the respective shift tD clean the latrines, tlrinals and wash places prQyip.ed in.the factDry for the use of the wDrkers'employed in that shift, in 'Order to maintain the Same in clean l!lld sapjtary collp.ition at aU times.' ") SCHEDULE' Sr. No. of workers in" No, ~e shift 1. Up tD 100 2. . AbOve 100 liutnot aboye250 3.. Aboye 250 but. not ,above 500 4. Above 500 but not" above 1000·' .. 5. Above 1000 . Nb. of ~ sweep~tk to' be en;tployed in . . th~ ~~ift 1 part time 1,full time 2' full time 3full,time' ., >, . 3 . full ti~e plus 'One full time for every additional 500 Dr part thereof, ' :;--, Rules 57 to 59prescl'i,bed u~dersub'sei:ti,on (2) ~f section 20. - ". -,: ' 57. Number" and location of' spittoons. - The number and location 'Of the spittoonstD be provided shall be tD the sa1;isfactiotl. of the InspectDr. Such spittDons shall'be placed 'On a stand Dr a bracket 90 centimetres high. . ,", 58. Type of spittOOns • .c,c The spittoons shall be 'Of either of the following types: ..c.c. •... . - . (a) agalvanisedirDn container\v;thaconical funnel-shaped cover. A layer 'Of suitable'disinfec­ tant liquid ,.hall always be maint$ed in the cDntainer; Dr' . ',.. . . , (b) a container filled with.':J,.yj clean sand; and covered with a layer of,pleaching' powder; ,Dr, (c) any ot!).er type apprDvedby .theC!).ief Ins­ pectDr. , 59. Cleaning of spitfuons. - The-~pit1:oons ,mentic­ n~d -in clause (a) 'of rule 58.sh,all be emptied, cleaned anddesinfected at lea;:;t::otl.ce'everyday; a spittoDn mentiDned in clause (I;j" of rule' 58 shall be cleaned by' scrapping out thetop:lay~r 'Of sand as often as necessary Drat leasFb"hde every day . , -', Or,) :'j'-'~"" 'CHAPTER IV, . SAFETY Further precautions' presc!ibed under ',SubcSection (2) of Section. 21. ..): 60.' Further safetyprecantions. '±'Withoutpreju­ dice to the provisiDns of sub-sectiDn (:I:) of SectiDn 21 in regard . to the fencing()f, machines,' the' further precautions sMcified in '. th!l Schedules annexed hereto shall apply to the. machines nDted in each Schedule. ' ".' ,', SCHEDULE. I 'Textile -Machinery exCept :Machinery used in Jute l\lills 1 .. Application. - The requirements of this Sche­ dule shall apply to machinery in factories engaged in the manufacture or processing of textiles other than jute textiles. The Schedule would n~t app~y to machinery in factories engaged excluslvely m the manufacture of synthetic fibres. 2. Definitions. -For the purposes of this Sche­ dule- (a) "Calender" means a set of heavy rollers mounted on vertical side frames and arranged to pass cloth between them. Calenders may have two to ten rollers, or bowls, some of which can be heated. (b) "Embossing calender" means a calender with two or more rolls, one of which is engravE)d for producing figure effects of various kinds on a fabric. (c) "Card" means a machine consisting of cylinders of various sizes - and in certain cases flats - covered with card clothing and set in relation to each other so that fibres in staple ,form may be separated into individual relation­ ship. The speed of the cylinders and their direc­ .tion of rotation varies .. The finished product is delivered as· a silver. Cards of different types are: the revolving flat card, the roller-and-clearer card, etc. (d) "Card clothing" means the material with which the surfaces of the cylinder, doffer, flats, . etc.oLa card are covered· and consists of a thick foundation material made of, either textile fabrics through which are pressed many fine closely spaced,. specially bent wires or mounted saw .toothed wire: (~) '. "Comber" means a machille for combing fibres of cotton wool, etc. The essential parts are device for feeding forward a fringe of fibres at 'regular intervals and an' arrangement of combs or pins, which, at the right time, pass through the fringe. All tangled fibres, short fibres and nips are removed and the long fibres are laid parallel. (f) "Combing machinery" me.ans a general clas­ sification of machinery including combers,silver lap machines, ribbon lap machines, and gill boxes, but excluding cards. , (g) Rotary staple "cutter" means a machine consisting of one or more rotary blades used for the purpose of cutting textile 'fibres into staple lengths. (h) "Garnett machine" means' any of a number of types of machines for opening hard twisted waste of wool, cottOn, silk, ete. Essentially, such machine!>, consist of a licker-in; one or more cylinders, each having a complement worker and stripper rolls;' and a fancy roll and doffer.The 'action pf such machines is somewhat like that a woof card, but it is much more severe in that the various rolls are covered with garnett wire instead of caM clothing. ' . .-, ." '. . . (i) "Gill box" means 'a . machine used in the worsted system of manufacturing yarns. Its SERIES I No.5 function is to arrange fibres in parallel order. Essentially, it consists of a pair of feed rolls and a series of followers where the followers move at, a 'faster surface speed and perform a combing action. (j) "In-running' rolls" means any pair of rolls. or drums between which there is a "nip". (k) "Interlocking arrangement" means a device that prevents the setting in motion of a dangerous part of a machine or the machine itself While the guard, cover or door provided to safe guard. against danger is open or unlocked and which will also hold tne guard, cover or door closed and locked While the machine or the dangerous part is in motion. (1) "Kier" means a large metalyat, usually a. pressure type, ill which fabrics may be boiled out, bleached, etc.. (m) "Ribbon lapper" means a machine or a part of a machine used to prepare laps for feeding a cotton comb; its purpose is to provide a uniform lap in which the fibres have been straightened as· much as possible. (n) "Sliver lapper" means a machine or a part. of a machine in which a number of parallel card slivers are drafted slightly, laid side by side in a compact sheet, and wound into a cylindrical package. (0) "Loom" means a machine for effecting the' interlocking of two series of· yarns crossing one another at .right angles. The warp yarns are wound on a warpbeain and pass through headles and reeds. The filling is shot across in· a shuttle and settled in place by. reeds and'slay, and the· fabric is wound on a cloth bea.m. (p) "Starch mangle" means a mangle that is' used specifically for starching ,cotton goods. It commohly consists of two large rolls and a shal­ low open vat with several immersion rolls. The vat contains the starch solution. (q) "Water. mangle" means a' calendar having two or more rolls used for squeezing water from fabrics before drying. Water mangles also may be used in other ways during the finishing of various fabrics. (r) "Mule" means a type of spinning frameo having a head, stock and a carriage as its two main sections. The head stock is stationery. The . carriage is movable and it carries the spindles which draft and spin the roving into yarn. The· carriage extends over the whole. width' of the machine and moves slOWly towards and away' from the head stock during the spinning operation. (s) "Nip" is the danger zone between two rolls' or drums which by virtue of their positioning and' movement create a nipping hazard. (t) "Openers and· pickers" means a. general classification of machinery which includes breaker' nickers, intermediate pickers, finisher pickers" single process pickers, multiple process pickers, wilIowmachines card 'and picker waste cleaners, thread extractors, shredding machines, roving' waste openers,shoady pickers;. 'bale breakers, feeders, vertical openers, lattice cleaners, hori­ .zontal cleanersoand .any similar machinery eqnip-· 3RD MAY, 1985 (V AISAKA ~3~,--=,1::,9':'..07~)~ ____ --,-__________ -----,-,--__ ---: __ 9_1 ped with either cylinders, screen section calender section, rolls, or beaters used for the preparation of stock for further processing. (u) "Paddler" means a trough for a solution . and two or more squeeze rolls. between which cloth passes after being passed through a mordant or dye bath. '(v) "Plaiting machine" means a machine' used to lay cloth ilito folds of regular length for the purpose of subsequent process or use. (w) "Roller printing machine" means' a machine consisting of a large. central cylinder, or pressure bowl, around the lower part of the perimeter of which is pll/-ced' a series of engraved color rollers . (each having a color trough), a furnisher mIler, doctor blades, etc. The machine is used for print­ ing fabrics. (x) "Continuous bleaching range" meaus a machine for bleaching of cloth in rope or open­ width form with the foIl owing arrangement. The cloth, after wetting out, pass through a squeeze roll into a saturator containing a solution of caustic soda and then to. an enclosed J-Box. A V-shaped arrangement isattachEidto the front part of the J-box for uniform and rapid saturation of the cloth with steam before it is packed down in the J-box. The cloth, in a single strand rope ·form, . passes over a guide roll. down the Ill'st arm of the /'V" and up the second. Steam is injected into . the "V" at the upper, end of the; second arm so that the cloth is ta pidly saturated with steam at thiS point. The J-box capacity is such that cloth will remain hot for a sufficient time to complete the scouring action. It then .passes a series of . washers with a squeeze roIl inbetween~ The cloth then passes through a second set of saturator, J-box and washer, where it is treated with the peroxide solution. By· sJightmodlfication of the form of the unit,the same process can be applied tq qpen-width cloth. . (y) "Mercerizing tange" means a 3-bowl mangle, ,a'tenter frame, and a number of boxes for washing and scouring. The wholeset.up is in a straight line and all parts operate continuously. The com­ bination is used to satUrate the cloth with sodium hydroxide,' stretch it while saturated and washing out most .of. the caustic, before creleasing tension. (:0) "Sanforising macliine',' meaDs a .machine consisting of a large steam~heatedcylinder .and endless, thick, woollen felt blanket which is in close contact with the cylinder for most· of , its pet"meter, and an electrically heated shoe which ' presses the cloth against the. blanket while the latter is in, a stretched condition as it curves aroUnd the feed-in roll. (aa) "Shearing machine" means a machine used for shearing cloth. Cutting action is provided by a number of' st~ blades spirally mounted on a roller. The roller rotates in close contact with a fixed ledger blade. There may be one to six such rollers on a machine. . . {bb) "Singeingmachine"means a machine\vhich comprises of a heated" :folIeI', plate or an open gas flame. The cloth or yarn is rapidly passed over .the roller ,or :the plate or; .through the open gas flame to remove; fuzz orl:)airiness by burning. (cc) "Slasher" means a machine ~d for apply­ ing a size mixture to warp yarns. Essentia1!y, it consists of a stand for holding section beams, a size box, one or, more cylindrical dryers or. an enclosed hot, air dryer, and a beaming end for winding the yarn. on the loom beams. (dd) "Tenter frame" means' a machine for drying cloth under tension. 'It . essenti~ly .con~ sists of a pair of endless travellIng chams fitted with clips of fine pins .and carried on tracks. The cloth. is firmly held. at the .selvages by the two chains which diverge as they move . forward so that the cloth is brought .to the desired width. (ee) "Warper" means a machine for preparing and arranging the yarns intended for the warp of a fabric, specificaIly, a :beam, warper.· 3. Ge~ra1 sajetyrequirements. - (1) Every textile machine shall be provided with individual mechanical or electrical means for sta.rting and stopping' such maChines.. Belt shifter on. machines driven by belts and shafting should be provided with a belt shifter ,lock or an equivalent positive locking device. (2) Stopping and starting handles or 'other con­ trols shall be of such design and so positioned as ,to, prevent' the operator'shand.or fingers, from striking against any moving part ,or any other part of ,the machine. . , . (3) All belts, puIleys, gears, chai~s, sprocket wheels and other dangerous'"moving parts of ma­ chinery which either form part of the' maChinery or are used in association with it, shall be se.curely guarded. . ... 4. Openers and. pickeTs.~· (1)' In all openirg. or picker machinery, beaters and other dangerous parts shaH be securely fenced by suit;tbl'il guards so as to prevent contact with them. Su,9hguardsand doors or covers of openings giving access to an:\(, dangerous part of the machinery shall be provided with inter- locking arrangement: . Provided that hi the case of 'dOors 'or'covers of openings giving access to any"dangerouspart, oth~r than beater covers; instea<j.of' th,e 'interlocking .arrangement, suell openings maybe so.fencedby guards which prevent access to any such dangerous part and which is either kept positively locked in position or fixed· in such a maIJll!lr, that. it cannot be removed witho,utthe use of:h,al1:d tools.:, (2) The feed rolls on all'op~ning and picking maellinery shall be coveredwitJi'a gu,a.rddesigned to prevent the. operator fromreaching:',We.:nip while the machinery is in operation. ' ',' , (3) The lap forming rollers shllll h~ fitted with agnard'or cover which shall prevent access to the nip at the intake of the lap roller and . fluted roller as long as the weighted rack is down. The guard . or cover shall be so locked that.it cannot be raised until the machine is stopped and the machine cannot be started until the cover or guard is closed. Provided' that the foregoingprov:ision shall not apply to the machines equipped with automatic lap forming devices. Provided further that any such machine equipped with an automa,ticlap forming dElVice 'shall not be 92 used \lilleSS the automatic lap forming device is in efficient working order. 5. Cotton cards.'- (1) All cylinder doors shall be secured by an interlocking arrangement which shall prevent the door being opened until the cylinder has ceased to revolve and shall render It impossible to restart the machine until the door has been closed: Provided that the latter requirement in respect of the automatic locking device shall not apply while stippingorgrinding operations are carried out: Provided further that stripping or grinding,ope­ rations shall be carried out only by specially trained adult workers wearing tight fitting clothing whose names have been ,recorded in the register prescribed in this behalf as required under'sub"section (1) of Section 22. (2) The licker-i~ shall be guarded so as to p~e­ vent access to the dangerous parts. ' (3) Every card shall be equipped with an arrange- , ment that would enable the card 'cylinder to be driven by power during stripping/giinding oPera­ tions witb,out haVing to either shift, the main belt to the fast'pulley of thepIachil'le or t6dismantle the interlocking mechanism. 'Such an arrangement shall be used, only for stripping or grinding operations. '6. Garnett machines. - (1) Garnett licker-ins shall be, enclosed. (2) Garnett fancy rolls shall be enclosed by guards. These shall be installed.in a way that keeps worker rolls' reasonably accessible for. removal or adjustment. ., (3) The underside ofthe garnett shall be guarded by a screen mesh or other form' of enclosm:es to prevent access. . . , 7. Gin boxes. - (1) The feed end shall be guarded,so,as to prevent fingers being caught in thepins.of.the intersecting fallers,· (2) . Ali nips of in.running rolls shall be guarded by sUitable nip guards oonfonriing to the following specifications: . . ,. Any opening which the guard maype;mit whim fitted in position'shall be so restricted WIth respect to the distance of the opening from any nip point through that opening and, in any ,circumstances, the rnaxim\lili 'width of the opening shall not exceed the followiIig: ' Distance of opening from nip point o to 38 m. '39to 63m 64to 88m. 89 to 140m 141 to 165 m '166 to 190 m 191 to 215 m Maximum. width of op.ening 6m 10 m' '13 m 15 m 19 m 22 m 32 m 8. Sliver and ribbO'f! lapp(}rs (cotton). - The calen­ der drums and the lap spool ,:Shall be provided 'with SERIES I,No. 5 a' guard to' prevent access to the nip "between the inrunning.'rolls. 9. Speed jrames.- Jack bOl<; wheels at the head stock shall be guarded and the guard shall have interlocking arrangement. 10. Spinning, muZes.- Wheels on spinning mule carriages shall be provided with substantial wheel guards, extending to within 6,m of. theraHs. 11. Warpers.- Swiveled double-bar gates shall be .installed. on, all ,warpers operating .in 'excess of 410 metres/min. These gates shall havfiriterlocking arrangement, except for the purpose of inching or jogging: '. ' , ~ -, Provided that the top and bottom bars of the gate shaH be at' least 1.05 and 0.53 ,metres high from the floor or working ,platform, and the ,gate shall be located 38 m from the ,vertical tangement ,to the beam head. 12. Slashers. ""';'(1) Cylinder ,dryers: (a) All open uips of ill,-running rolls shall bel3!larded by nip 'guards conforming to the requirements in para- graph 7. ' , (b) When slashers are operated by control levers, these levers shall be connected toa '!iorizontal bar or treadle located riot more than 170 cm. above the floor to control theoperationfrom:I4lY point, (c) Slashers ',operated by push, button control shall have stop, and' start buttons located at each end of themachinej' and additional buttons located on both sides of the:machine, at the size box and the delivery end. If calendar rolls are 1Ised, addi­ tional buttons. shall be provided 'at' both sides . of the, machine at· points ·near"to the 'nips, . except when slashers are equipped with anericlosed dryer as in paragraph (b). (2) Enclosed,b.ot air dryers: (a) All open uips of the top squeezihgrollers shall be guarded by nip guards conforming to the requirements in para- graph 7(2)., , " ' ' (b) When slashers are operated by control levers, these levers' shall be connected to a',1l()rizon41-1 bar or treadie located not 1Il,0te than 170clh. above the ,floor to eontrolthe operation from, any point, .' (c) Slashers operated by push-britton control shall have stop and start'buttons located at each end of the machine and additional stop .and start buttons located on both sides of 'the machines at intervals spaced not more than 1..83' metres on centres. 13. Looms. c ,Each 100m shall be equipped' with suitable guards,' designed' to minimise the danger from flying shuttles. 14. Valves oj kiers, tanks and other containers.­ (1) Each valve controlling the flow of 'steam, inju­ rious gases or' liqUids into a kier or any other tank or container infu which a person is likely to enter' in connection with'a process,operatiorl, mairitenance or for any other , purpose, shall be proVided with a 8RD MAY, 1981i (VAISAKA 13,~--,1=9:.::.0.:.,7)~ ______ _ 93 suitable locking arra,ngement to enable tbe said person to lock the valve securely in tbeclosed posi- , tion and retain the key with him before entering tbe kier, tank or container. ' (2) Wherever boiling tanks, caustic tanks and any otber containers from which liquids which are hot, corrosive or toxic may overflow or splash, are s.o located that the operator cannot see tbe contents from tbe floor or working area, emergency shut off valves which can be controlled from a point not sub­ ject to danger of splash shall be provided to prevent danger. ' 15. Shearing machines. - All revolving blades on shearing machines shall be guarded so that the opening between the clotb surface and the bottom of tbe guard will not exceed 10 m. 16. Continuous bleaching range (cotton and rayon). ---'- The nip of all in-running rolls on open­ -width bleaching machine rolls shall be protected witb a guard to prevent tbe worker from being caught at the nip. The guard shall extend across tbe entire length of the nip. ' 17. Meroerizing range (pieoe goods).- (1) A stopping device shaH be provided at each end of tbe machine. ' (2) A guard shall be provided at each end of tbe frame between the in-running chain and tbe clip opener. (3) A nip guard shall be provided for tbe 'in­ -running rolls of tbe mangle and washers and the guard shall conform to the requirements in para- graph 7(2). ,,' " ' , ' ,18. Tf!nter frames. - (1) A stopping device shall be provIded at each end of tbe machine. (2) A guard shall be provided at each end of the machine frame at the in-running chain and 'clip opener. 19. Paddlers. - Suitable nip guards conforming to the requirement in paragraph 7 (2) shall be provided to all dangerous in-running rolls. ' , 20. Centrifugal extractorS. - (1) Each extractor shall be provided with a guard for the basket and the guard shall have inter-locking arrangement. , (2) Each extractor shall be eql'\ipped with a me­ chanically or electric~lly operated brake to quickly stop tbe basket when the power driving tbe basket is shut off. 21. Squeezer or wringer extractor, water mangle, starch mangle, backwasher (worsted yarn) crabbing machines, and deoating machines. - All in-running rolls s!)p.ll ,be guardlld with nip guards conforming to the requirements in paragraph 7(2). 22. Sanforizing ana palmer machine. - (1) Nip guards shall be provided on all accessible in-running rolls and these shall conform to the requirements in paragraph 7 (2) .• (2) Access from the sides, to tbe nips of in-runn­ ing rolls should be fenced by suitable side guards. (3J) A safety trip rod, cable or wire centre cord shall be provided across the front and back of all palmer cylinders extending tbe length of tbe face of the cylinder. It shall operate readily when pushed or" pulled. The safety trip shall not be more than 170 cm. above the level at which' tbe operator stands and shall be readily accessible. 23. Rope' washers. - (1) Splash guards shall be installed' on all rope washers unless the machine is so designed as to prevent the water or liquid from splashing tbe operator, tbe floor or working surface. (2) A safety trip rod, cable or wore centre cord shall be provided across the front and back of all rope washers extending tbe length of tbe face of the washer. It shall· operate readily Whether' pushed or pulled. This safety trip shall be not more than 170 cm. above the level on which the operator stands and shall be readily accessible. 24. Lauiulry washer tumbler or shaker.:- (1) each drying tumbler. each double cylinder shaker orclotbestumbler, and eaCh washing machine shall be equipped witb aninter-Iocking arrangement which will prevent tbe power operation of tbe inside cylin­ der when the outer door on tbe case or shell IS open, and whi,ch will, also prevent the outer door, on tbe case or shell from being openedcwitbout"shutting off tbe power and tbe cylinder coming to a stop. This should not prevent tbe movement of tbe inner cylin­ der by means of a hand operated mechanism or an inching device. ' (2) Each closed barrel shall also be equipped with adequate means for holding open tbe doors qr covers of the inner and outer cylinders or shells while it is being loaded or unloaded. ' 25. Printing machine (roller type). - (1) All in­ -r~ing· rolls shall be guarded by nip guards con­ formmg to the requirement in paragraph 7 (2). (2) The engraved roller gearS and tbe large crown wheelshaU' be guarded. ': " ' , 26. Oalenders.-The nip at tbein-running 'side ?f the rolls shall be, provided with a guard extend­ mg across the entire length of the nip and arranged to prevent the fingers of the workers from being pulle\l in between the rolls or b~tween the guard and the roUs, and shall be so constructed tbat the cloth can be fed into the rolls safely. , . , 27. Rotary staplecutte7's. - Th~:cutter shall be prot~cted by a guard to prevent hallds reil-ching the cutting zone. . , " : 28. Plaiting ,ma'chines. ~ Access to the trap bet­ ween tIle knife and card bar shall be prevented by a guard. ' ' 29. Hand bailing machine, - An angle iron handle­ -stop guard shall be installed at right angle to the frame of tbe machine. The stop guard shall be so designed and so located that it will prevent the handle from travelling beyond the vertical position should the handle slip from the operator's hand'when tbe pawl has been 'released from' 'tbe teeth of the take-up-gear. 94 30. Flat-work ironer. - Each flat-work or collar ironer shall be equipped with a safety bar or other guard across the entire front of the feed or first pressure rolls, so arranged that the striking of the bar or guard by the hand of the operator or other person will stop the machine. The guard shall be such that the operator or other person cannot reach into the rolls without removing the guard. This may be either a vertical guard on all sides or a complete cover. If a vertical guard is used, the distance from the floor or working platform to the top of guard shall be not less than 1.83 metres. ' SCHEDULE II 'Voodworking :Machinery , 1: DefinitWns. - For the purpose of this Sche- dule- ' (a) "woodworkihg machine" means a circular saw, band saw, planing machihe, chain mortising machihe or vertical spindle moulding machine operating on wood or corl, ; , (b) "circular saw" means a circular saw work­ ing in a bench (includihg a rack bench), but does not include a pendulum or similar saw which is moved towards the wood 'for the purpose of cuttihg operation; (c) "band saw" means a band saw, the cutting portion of which runs in a vertical direction but does not include a log saw or band re-sawing machine; and (d) "planing machine" means a machihe for overhand planing or for thicknessing or for both operations. ' 2. stopping and starting tlivice.- An. efficient stopping and startihg device shall be provided on every wood-working machine. The control of this device shall be in such a position as to be readily and conveniently operated by the person in charge of the machine. 3. Space' around machines. - The space surround­ ing every woodworking machihe in motion shall be kept free from obstruction. 4. Floors. - The floor surrounding every' wood­ working machihe shall be maintained in good and level condition, and shall not be allowed to become slippery, and as far as practicable shall be kept free from chips or other loose material. <, 5., Training and supervision. - ,(1) No person shall be employed at a woodworking machine' unless he has been sufficiently trained to work that class of machine, or unless he works under the adequate supervision of a person who has a thorough knowledge of the workihg of the machine. (2) A person who is being trained'to work a wood­ workihg machine shall be fully, and carefully ins­ tructed as to the dangers of the machine and the precautions to be observed to ensure safe working of the machine. " 6. Circular saws. - Every circular saw shall be fenced as follows:- (a) behind and in direct line with the saw there shall be a riving knife, which shall have a. smooth SERIES I No. 5 surface, shall be strong, rigid and easily adjust­ able and shall also conform to the following condi­ tions: - ,(i) the edge of the knife nearer to the saw shall form an arc of a circle having a radius not exceeding the radius of the largest saw used on the bench; (ii) the knife shall be maintained as close as practicable to the saw, having regard to the nature of the work being done at the time, and at the level of the bench table. The distance' between the front edge of the knife and the ,teeth of the saw shall not exceed 12 millimetres; and (iii) for a saw of a diameter of less than 60 centimetres the knife shall extend upwards from the bench table to within 25 millimetres of the top of the saw, and for a saw of a diameter 60 centimetres or over shall extend upwards from the bench table to a height of, at least 23 centimetres. (b) the top of the saw shall be covered by a strong and easily adjustable guard, with' a flange at the side' of the saw farthest from the fence. The guard shall be kept so adjusted that the said flange shall extend below the roots of the teeth of the saw. The guard shall extend from the top of the riving knife to a point as low as practicable at the cutting edge of the saw; . (c) the part of the saw below the, bench table shall be protected by two plates of metal or other suitable, material, one' on each side of the saw; such plates shall not be more than 15 centimetres apart, 'and shall extend from the ~is of the saw outwards to a distance of not less than 5 centi­ metres beyond the teeth of the saw. Metal plates, if not beaded, shall be oia thickness of at least 2.5 millimetres, or, if beaded, be of. a thickness of at least 1.25 millimetres. 7. Push sticks. - A push stick, or ,other suitable appliance shall be provided for use at every circular saw and'at every vertical spihdle moulding machine to enable the work to be done without unnecessary risk. 8. Band saws. - Every band saw shall be guarded as follows- , (a) both sides of the bottom pulley shall ,be completely encased by sheet or expanded metal or other suitable material; (b) the front of the top pulley shall be covered with sheet or expanded metal or other suitable material; and ' ' (c) all portions of the blade shari be .enclosed or otherwise securely guarded, except the portion of the blade between the bench, table and the top guide. ' , 9. Planing machines. ~ (1) A pla.ning machine (other than a' planing machine which is mechani­ cally fed) shall not be used for overhand planihg unless' it is fitted with a cylindrical cutter blook. (2) Eve,ry planing tnachine used for overhand planing shall be provided with a "bridge" guard capable of covering the full length and breadth of " I 3RD MAY, 1985 (VAISAKA 13, 1907) the cutting slot in the bench, and s.o constructed as t.o be easily adjusted b.oth in a vertical and h.oriz.ontal directi.on. . . . (3) The feed r.oller .of every planing machine used fer thicknessing except the c.ombin~d machine f.or .overhand planing and thicknessing shall be pr.ovided with an efficient guard. 10. Vertical spindle moulding machines. - (1) The cutter .of every vertical spindle m.oulding'machine shall be guarded by the most efficient guard having regard t.o the nature .of the w.ork being perf.ormed. . . (2) The w.ood being m.oulded at a vertical spindle m.oulding· machine, shall, if practicable, be held in a jig .or h.older .of such c.onstructi.on as t.o reduce as far as p.ossible the risk .of accident t.o the w.orker. 11. Chain mortising machines. - The "chain .of every chain mQrtising machine shall be pr.ovided with a guard which shall encl.osethe cutters as far as practicable. 12. Adjustment and maintenance'.of guards;_ The guards and .other appliances required under. th.is Schedule shall be- (a) maintained in an efficient state; (b) c.onstantlykept in positi.on while the ma­ chinery is in m.oti.on; and (c) .$.0 adjusted. as tQenable. the w.ork t.o be . . dQne with.out unnecessary risk. '13. Exemptions. - Paragraphs 6, 8, 9 and 10 shall net apply t.o any wood werking ma.chine in respect .of which it can be pr.oved that .other safeguards are pr.ovided, maintained and used which render the machine as safe as it. w.ould be if guarded in. the manner prescribed in this Sche?ule., . SCHEDULE III Rubber and Plastic Mills 1. DefinitiQn. - (i) A "Rubber and Plastic Mill" shall' .mean. machine with rQllers used in breaking dQwn, cracking, washing, grating, mixing, refining and warming . .of rubber .or rubber cQmpounds and plastic .or plastic cQmpotinds. (ii) A "Calender" shall mean machine with r.olls used fQr fricti.oning, sheeting,coatlng and spreading .of rubber .or rubber compounds and plastic .or plastic c.ompounds. . . .2. Installation .of machines. - Rubber. and plastic mills· shall be SQ'installed that the tQP .of the fr.ont r.oll is n.ot less than 105 centimetres above the flQQr .or wQrking level:. PrQvided ihatinexisting installatiQns where the top of the front roll is belQwthis height, a ,str()ng, rigid distance-bar guard shall be fitted across the fr.ont of the machine in such a positi.on that the .operat.or cannot reach the nip .of the roller frQll). the n.ormal wQrking positi.on .of the Qperat.or. . . 3; Safety devices. - (i) Rubber and plastic mills shall be equipped with - . (a) h.oppers· s.o constructed .or guarded that it is impossible f.or the .operat.ors t.o CQme into c.on- 95 tact in any manner with the nip .of the. rolls; .or (b) hQrizQntalsafety-trip rods or tight wire cables across bQth fr.ont and rear, which will, when pushed .or pulled, .operate instantly, tQ dis­ CQnnect the power and apply the brakes .or t.o reverse the r.olls . . (c) , Safety-trip . r.ods .or tight wire cables .on rubber ~ shall extend across the entire length .of the face .of the r.olls and shall be l.ocated n.ot m.ore than 175 centimetres. above the flQ.or .or wQrking level. '. . (ii) CBlender machines shall. be equlpped with­ '(a)' H.oriz.ontal safetY'-trip rods .or tight wire . aCrQSS b.oth. fr.ont and rear, which will when pushed .or pulled .operate instantly,t.o disc.onnect the PQwer and apply the brakes .or t.o reverse the r.oll; (b) Sarety~trip rodS .or tight wire cables.on .calendermachines shall.. extend. acr.oss the entire 'length .of the face.of the rQll and shall be l.ocated not mQre than 170 centimetres above the floor .or w.orking level; . . . (c) .on each side .of all. calenders and near both ends .of the face .of ther.olls there shall be a ver­ tical tight wire cable:c.onnectingwith. the bar . tripping .me.chanism at the t.op and fastened t.o the frame within 30 centimetres .of the floor. These cables· shQuld be positi.oned at a distance .ofi).otlll.ore than. 30 centimetres from the face .of the r.oll and at a distance ·Qf n.ot less than 25 millimetres fr.om the' calender frame • 4. Maintenance and. safety dev.ices. - Safety trip rods and tight wire cables .on all rubber mills and calenders shall be examined and tested daily in the presence .of ·the manager or .other resp.onsible person and if any defect is discl.osed by such examinatiqi) and test, the mill shall nQt be used until such defect has been remedied. 5; Injunotion MOulding Machine. - (a) An elec­ trical interlock arrangement shall be pr.ovided s.o that the m.oulds cann.ot' .be clQsedunless the fr.ont safety gate is fully closed and .on.opening the frQnt safety gat,e, the m.oulds will stop aut.omatically. (b) in lJ,dditi.on to the above. arrangement an hydraulic safety shall als.o be inc.orp.orated with the fr.ontsafety gate. This shall prevent the tail stock jl1Quld,.platl! frQm m.oving fQrward .on 'opening .of the front sRfety gate. (c) At the rear .of the machlne, there shall be 'pr.oVided either an efficient fixedgwu.a .or a sliding gate wjlich shall be electrically iriier-locked with, the m.ovement of the m.ould plates in the manner .of. the fr.ont safety gate as requlred under (lI.) above $.0 as t.o prevent access t.o the danger z.olie.of the m.oulds in m.oti.on from the rear. ScHEDULE IV··' ·Centrlfugal Machin ... .1. Definition.~ "Centrifugal ma~hines" include centrifugal extract.ors . .or droextract.ors, separators ' and driers. . 2. Every part.of cenb-ifugal machine'shall be­ (a). of ,good design and c.onsti-Ucti.on .and .of adequate' Strength; 96 . (b} properly maintained; and . (e) examined thoroughly by a competent person at regular intervals. 3. Interlocking guard for drum or basket. - (1) The cage housing the rotating drum 0: bask~t of every centrifugal machine shaH be provided Wlth a strong lid. The design and construction of the ca~e as well as the lid shall be such that no access IS possible to the drum or basket when the lid is closed. (2) Every centrifugal machine shall be provided with an efficient interlocking. device that will effec­ tively prevent the lid refe:red to in sub-paragrar:h (1) from being opened while the drum or basket IS in motion and prevent the drum or basket J;>!:ing set in motion while the lid is in the open poSItion. 4. Braking arrangement. - Every centrifugal machine shall be provided with an effective braking arrangement capable of bringing the drum or basket to rest within as short a period of time as reasonably practicable after the power is cut off~ 5. Operating speed. - No centrifugal machine shall be operated at a speed in' excess of the manu­ facturer's rating which shall be legibly stamped at easily visible places both on the inside of the basket and on the outside of the machine casing. 6, Exceptions. - Sub~paragraph (2) of paragraph 3, paragranhs 4 and 5 shall not apply in case of top lung machines or similar machines used in the sugar manUfacturing industry., . SCHEDULE V Shears and: Gnillo~e l\-Ia~e8 1. Definition. - The term "shears and gnillotine" means a machine, whether driven by power or other­ wise, equipped with a straight beveledged blade operating vertically against a resisting edge and . used for shearing metals or non-metallic substances. . 2.' A b~ier nietalguard of adequate strength . shaH be provided at the front of the knife, fastened to the' 'machine frame and shall be so· fixed as would prevent any part· of the operator's body to reach the descending blade from above, below or. through the barrier guard or from the :;ides: Provided that in case of machines used in the paper printing arid allied' industries where a fixed barrier metal guard is not suitable on account of the, height . and volume of the material. being fed, there shall be provided suitable starting devices whiqh require simultaneous action of both the hands of the operator or .an automatic device. which will remove both the hands of the operator from the dangE!~ ZOl).e at every descent of the blade. 3. At the .back end of such machines, an inclined guard shall be provided over which the slit pieces weuld slide and be collected at a safe distance in a manner as would prevent a ]JerSon at the back from reaching the descending blade. SCHEDULE VI Agitato .... and Mixing Machines 1. Definition.,- "Agitators and Mixing Machines" means a tank 'Or other container equipped With power- SERIES IND. 5 -driven mixing .arms; blades or paddle wheels fixed to revolvable shafts or ether simple mechanical devices fer blending/stirring liquids with other liquids or with solid substances or combinations of·these. . 2. When the top 'Of an open agitator tank, beater tank, tank or paddle tank or a similar vessel is less than 1 metre above the adjacent floor or working level, adequate standard railings shall be installed on all 'Open sides. 3. Agitators and mixing machines shaH be pro­ vided with an efficient inter-lock arrangement for the top lid, to prevent access to the agitating, stirring or similar devices, whilst in motion and would pre­ vent restart under power with. the lids in open position. 4. When other inspection or examination openings are provided at the top or sides. of the container vessels of the agitator and mixing machines, such openings shall be provided with standard grill guards as would prevent access of any part of the operator's body coming in contact with agitator, stirring or similar devices whilst in motion. 5. When discharge holes, openings, chutes or simi­ lar arrangements are provided at the bottom 'Or at the sides of the 'container vessels. of the agitator and mixing machines, they shall be' so designed, shaped, guardeP. or situated as would prevent access 'Of any part of operator's body comitJg in contact with agitating, stirring or similar devices, whilst in motion insidE! the vessel. SCHEDULE. VII Leather Pfustic and Rubber Stripper IIlachines Strippers for trimming or punching. tanned hides, plastic rubber sheets in leather making, footwear manufacturing Dr in similar industries shall be pro­ vided with suitable devices which require simulta­ neous action of both the hands of the operator or an automatic device which will remove both the hands of the operator from the danger zone at every descent of the blade, punch 'Or stripper cutter. SCHEDULE VIII 1. In all machinery driven by power and installed in any factory after commencement· of this rule, all couplings' with projecting bolt heads, and similar projectiens shall be cempletely encased or otherwise, effectively guarded as to prevent danger. Rules pr~:;cribed under sub.section (J.) of section 22 and section, 112. . 61. Register of specially trained adult workers. - Register of workers attending to maChinery as pro­ vided in sub~s.ection (1) of sectien 22 shall be in Ferm 10. . 62. Tight fitting clothing. - A worker required to wear·tight fitting clothing under sub-section (1) of section 22 shaH be provided by the occupier with such clothing which shall consist of at .least a pair of closely fitting shorts and a closely fitting half sleeves shirt 'Or vest. Such clothing shall be returned to the occupier on termination of service or when new clothmg isprevided. ~3R~D~M~A~Y~,~1~98~5~(V~A~1~S~A~K~A~1~3~,~.1~90~7~) ____________ ~------------~------------97 Rule prescribed under. section 41. 63. Belts, etc. t~ be regularly examined. - All belts shall be regularly examined to ensure that the joints are' safe and the belts are at proper tension. Rule prescribed under sub-section (2) of section 23. M. Employment of young persons on dangerous machines. - The machines specified in sections 28, 29 and 30 and the machines mentioned below shall be deemed to be of such dangerous character that young persons shall not work at them unless the provisions of sub-section (1) of section 23 are com- . plied with- (a) Power presses other than hydraulic presses. (b)' . Milling ·machines· used in the metal trades. (c) . Circular saws. . (d) Platen printing machines. (e) Guillotine machines. Rule prescribed under sub.section. (8) .of section 28. 65. Hoist examination.- particulars of. - A regis­ ter shall be maintained to record particulars of exa- . mination of hoists or lifts and shall give particulars as shown in Form 11. 'Exemption under sub-section (4) ofseclion 28. 66. Exemption of certain hoists and lifts. - In pursuance of the provisions of sub-section (4) of section 28, in respect of any class' or description of hoist or lift specified in the first column of the fol­ lowing Schedule, the requirements of section 28, specified in the second column of the said Schedule and set opposite to that class or description or hoist or lift shall not apply: --'- . . SCHEDULE Class or descripion of hoist or lift (1) Hoists or lifts mainly used for raising mate­ rials for chargi.ng blast furnaces or lime kilns. Hoi s t s not connected with mechanical power and which are not used for carrying persons. Ftequdrenaents, vvtuch shall not apply (2) Sub - seqtion (1) (b) in so far as it· requires a gate at the bottom landing; sub - section (1) d) ; sub - section (1) (e). Sub -section (1) (b) in so far as it requires thehoistways or lift­ -ways enclosure to be So constructed as to prevent any person or thing fr.om being trapped between any part of the hoist or lift and any' fixed struc­ ture or moving part; sub - section (1) (e). .Rule prescribed under sub-section (2) of section 29. 67. Lifting machineS, chains, ropes and lifting . tackles. -:- (1) No lifting machine and no chain, rope or lifting tackle, except a fibre rope or fibre rope sling, shall be taken intO use in any factory for the first time in that factory unless it has been tested and all parts have been. thoroughly examined. by a competent person 3.I)d a certificate of such It test and examination specifying the safe working load· 'or loads and signed by the person making the test and the examination, has been obtained and is kept available for inspection. (2) Every jib-crane so constructed. that the safe working load may be varied by the raising or lower­ ing of the jib, shall have attached thereto either an automatic indicator of safe working loads or an automatic jib angle indicator. and a table indicating the safe working loads at corresponding inclinations of the. jib or corresponding radii of the load. (3) A table showing the safe workfug loads of every kind and sise of chain, rope or lifting tackle in use, and, in the case of multiple sling, the safe working loads at different angles of the legs, shall be posted in the store room in which the chains, ropes or lifting tackleS are kept, and in prominent· positions on the premises and' no chain, rope or lifting tackle not shown in the table shall· be used: Provided that this sub-rule shall not apply' in respect of such lifting tackle if the saf~ wor~ing load thereof, or in the case of a multlple slmg, the satf'e working load at different angleS of the legs, is plainly marked upon it. (4) The register to be maintained under clause (a) (iii) of sub-section (1) of section 29 of the Act shall be in Form 12 and shall.be kept readily avail­ able for inspection .. (5) All rails on which a travelling crane moves and every track. on which the carriage of a trans­ porter or runway moves shall. be· of proper si2e and adequate strength and have an even running surface; and every such rail or track shall be properly laid, adequately supported and. pr~ly maintained. (6)' To. provide access to rlill tracks .ofoverhead travelling cranes suitable pasSllge-ways of at least 50centinletres width. With toeboards and double haM rails 90 centimetres high shall ~.,provided alongside, and clear of, the rail tracks of, overhead travelling cranes, .such that no mOving part of the crane can strike persons on the ways,and., the passage-way shan'be ata lower level than the crane track itself. Safe access. ladders shall be provided at suitable intervals to. afford access.to these passage-ways,and from passage-ways to the rail. tracks: Provided that the Chief Inspector may,for !'ea­ sons to be specified in Writing,exempt any factory in respect of any overhead trl!,yelling crane ,from the operation of any provision of this sub-rule.sub- ject to such conditions as he ·mayspecify. . f (7) All chains and liftingta~kles except a rope sling shall, uriless they have beeIi s1).bjected to such other heat treatmEmt as: may lk. approved by the Chief Inspector of Factories, be effectively annealed un!'ler the supervision oia competent person at the following' interVals: .• . . '. . (a) all chains, slings, rings, hooks, shackles and sWivels used .i1). ·connection with molten metal or molten slag or :vy-hen they are made of 12.5 milli­ metres bar or smaller, once at least in every six months; . . (b) . all other chains, rings, hooks,shackles and swivels . in general use; once at least in every twelve months: . . 98 ______________________________ SE_R_'_IE_S_'_i_N_o_;_5 Provided that chains and lifting tackle not in frequent use shall, subject to the Chief Inspector's approval, be annealed only when necessary. Parti­ culars of such annealing shall be entered' in a register in Form 12. (8) Nothing in the foregoing sub-rule (7) shall apply to the following classes cif chains and lifting tackles:- (a) chains made of malleable cast iron; (b) plate link chains; (c) chains, rings, hooks, shackles and swivels made of steel or of any noncferrous metal; (d) pitched chains, working on sprocket or pocketed wheels; , (el, rings, hooks, ,shackles and swivels perma­ nently attached to pitched chain!!, pulley blocks or weighing maChines; , (f) hooks and swivels having, screw threaded , parts or ball bearing or other case hardened parts; (g) socket shackles secured to wire ropes by white-metal cappying; (h) bodeaux connections; and '(i) any chain or lifting tackle which has been subjected to the heat treatment known as "nor­ malising" instead of annealing: Provided that such chains and lifting tackles shall be thoroughly examined by a competent person once at least in every twelve months and particulars entered in the register kept in Form 12. (9) All lifting machines,ropes, chains and lifting tackles, except a fibre, rope or fibre sling, which have been lengthened, altered or repaired by welding or otherwise, shall, before being again taken' into use, be adequately re-tested and re-examined by a competent, person and certificate of such test and exainination be obtained, and particulars entered in the register kept in Form 12. (10) 'No person under 18 years of age and no person' who is not SUfficiently competent and reliable shall be employed as driver of a lifting machine whether driven by mechanical power .or .otherwise, or to give signals to: a driver. ' (11) Where the Chief Inspector .of Factories is 'Satisfied that in a fact.ory due to shutdown or for any 'other ,reasons it is not practicable to maintain a minimum distance of I> metres between the person employed or working on or ,near the Wheel track of, a travelling crane and the crane, he may at the request of the manager; reduce the distance to such extept as he may consider necessary and' also pres­ cribe further precautions indicating appointment of suitable number of supervisors to ensure the safety of the persons while they are employed or working on or near the track. Rules prescribed under 'sub-section (2) of section 31. 68. Pres!>nre vessels .or plant.~(1) Interpretation- In this rule - "', ' (a) "design pr:essure" means the maximum pressure that a pressure vessel or plant is designed t.o withstand safely when operatiilg normally; (b) "maximum permissible working pressure" means the maximum pressure at which a pressure vessel or plant is permitted to be operated or used ,under this rule and is determined by the technical requirements of the process; (c)' "plant" means a system of 'piping that is cOnnected to a pressure 'vessel and is used to contain, a gas, vapour or liquid under pressure greater 'than the atmospheric pressure, and in-, cludes the pressure vessel; , (d) "pressure vessel" means a vessel that may be used for containing, storing, distributing, transferring,' distilling, processing or otherwise handling ,any, gas, vapour or liquid under pressure greater, than the atmospheric pressure and in­ clude's any pipelines fitting or other equipment attached thereto.or used in connection therewith; and ' (e) "competent person" means a person who is, in the opinion of the Chief Inspector, capable by virtue of ,his qualifications, training and expe­ rience, 'of conducting a thorough examination and pressure tests, as required, on a pressure vessel or plant, and of making a full report on its condi­ tion. (2) Exceptions':"" Nothing in this rule shall apply to- (a) vessels made of ferrous materials having an internal operating pressure not exceeding 1 kilogram per square centimetre.' , '(b) steam boilers, steam and feed pipes and their fittings coming under the purview of, the Indian Boilers Act, 1923; (c) metal bottles or cylinders used for storage or transport of compressed gases or liquified or dissolved gases under pressure covered by the Gas Cylinder Rules" 1940 framed under the Indian Explosives Act, 1884; (d) vessels in which internal pressure is due solely to the static heat of liquid ; (e) vessels with a nominal water capacity not exceeding 500 litres connected in a water-pump­ ing systerq, containing air that is' compressed to serve asa cushion; (f) vessel for nuclear energy applicatio,n; (g) refrigeration plant having a capacity of ,3 tone or less of refrigeration in 24 hours; and (h) working cylinders ,of steam engines or prime movers, feed' pumps and steam traps; turbine casings; compressor cyIlnders; steam seperators or dryers; steam strainers; steam de'superheaters;' oil seperators; air receivers for fire sprinkler installations; air receivers of mono­ type machines provided the maximum working pressure of the, air receiver does not exceed 1.33 kilograms per square centimetre and the capacity 85 litres; air receivers of electrical circuit brea­ kers; air receivers of electrical relays; air vessels on pumps, pipe coils,. accessories of ' instruments and applian~es such as cylinders and piston assem­ blies 'liSed for operating relays and interloCking type of guards; vessels with Jiquidssubjected to static heat only; and hydraulically operating cylinders ,other than any cylinder communicating with an air loaded accumulator. ' ' 'i.: .. 3Rli MAY; 1985 (VAIMEA 13,1907) (3) Design . and construction. ~ Every pressure vessel or plant used in a factory - (a) shall be properly designed on sound engi­ neering practice; (b) shall be of good construction, sound mate­ rial, adequate strength and free from any patent defects; and (c) shall be properly maintainEld in asafecon- ditions: '. . Provided that the pressure vessel or plan in res­ pect of the design and construction of which there is an Indian Standard or a standard of the country of manufacture or any other law .. or regnlation in force, shall be designed and constructed in accor­ dance with the said· standard, law or regulation, as the case may be; and a certificate thereof shall be ob­ Wned from the manufacturer orfrom the competent perSon which shall be kept and produced on demand by. an Inspector. . (4) Safety dwice8~ - Every pressure vessel· shall be fitted with - (a) a suitable safety valve or other effective pressure relieving device of adequate capacity to ensure that the maximum permissible working pressure of the pressure vessel shall not beexcee­ ded. It shall be set to operate at a pressure not exceeding the nia...amum permissible working pressure and when more than one protective device , is provided, only one of the devices need to be set to operate at the maximum permissible working pressure apd the additional device shall be set to ·discharge at a pressure not more than 5 per. cent in excess of the maximuIn permissible working pressure; (b) a. suitable pressure gauge with a dial range n,ot less than 1.5 times ,the maximum permissible working pressure, easily visible and designed to '. show at all times the correct internal pressure and marked with.a prominent red mark at the maxi­ mum permissibl~ working pressure of the. pressure 'vessels; . (c) a suitable nipple and globe valve connected · for the exclusive purpose of attaching a test pressure gauge for checking the accuracy of the pressure gauge referred to in, clause (b)· of this . sub-rule; (d) a suitable stop valve or valves. by which the pressure vessel may be isolated from other pres- · sure vessels or plant or source' of supply of pres­ . ·-sure. Such a stop valve or valves :shall be located as close to the pressure vessel as possible and · shall be easily accessible; and '(e) a suitable drain cock or valve at the lowest part of the pressure vessel for the discharge of the liquid or other substances that may collect in the pressure vessel; Provided that it shall be sufficient for the pur­ pose of this su,b-rule if the safety valve or pres­ sure relieving device, the pressure gauge and the . stop valve are mounted on' a pipeline immediately adjacent to the' pressur<c vessel and where there is :a range of two or more similar pressure vessels served by the same pressure lead, only one set -of such mountings need be fitted on' the pressure :99 lead immediately adjacent to the range or pres­ sure vessels,'provided they cannot be, isolated. (5) Pressure reducing devices-C.. (a)Everyp~essure v~sselwhich is designed for a working pressure less than the, pressure .. at source of supply, or. less than the pressure which . can be obtained in the pipe connecting the pres­ sure vessel with any other source of supply, shall be fitted with . a suitable pressure reducing valve or other suitable automatic device to prevent the maximum permissible working pressure of the pressure vessel being exceeded. . . (I) To fUrther protect the pressure vessel in the event of failure' of t4e reducing valve or' device, at least one safety valve'having a capacity sufficient to release all the steam, vapour or gas without undue I1ressure rise' as. determined by the pressjlre at .the source of supply and .the .. size of the ,pipe connecting the source of supply, shall be fitted on the low pressure side of the reducing valve. ' (6) . Pressure vessel or plant being taken into . use- . (a) . No new pressure vessel or; plant shall be taken into use in a factory after coming into force of this ru,le unless it has been hydrostatically tested by a competent person at apressure at least 1.3 times the design pressure, and. no pressure vessel or plant which. has been previously used or has remained isolated or idle fora period exceeding. 2 months' or which has undergone. alterations or repairs shall be taken into use in a factory Unless it has been thoroughly examined by a' competent perso.n externally and internally, if practicable,and has been hydrostatically tested by the competent person at a pressure which shall. be 1.5 times the maximum permissible working pressure: Provided, however, that the'pressure vessei or plant which is .so designed ilnd constructed that it cannot ,be safely filled with water or liquid or is used in 'service when even some traces of water cann<;>t. be .toll')rated, shall be pneumatically tested atapressure not less thanthe.design pressure. or . the mltXimmn permissible working pressu,re as.the case inay be: . . Provided' further that the pressute vessel' 0'" Plant which is lined with glass shall be tested hydrostatically or pneumatically, as .required at a presSur~ not less th.an the desig'ilpressure or Ipa­ ximilm. permissible working pressure as the . case maybe: ,.... . ,,' ,..' .... . Design pressure .shall not b!l less' ·than the maximUW, ,.permissible working pressure and sh.all take into account the possible; fluctuations ' of .. pressure during •. actual operation. (b) No pressure vessel or plant shall be used in a factory unles!> there has been obtained from the maker of the pressure vessel or plant. or from the c.ompetent person a certificate specifying the design pressure or maximum permissible. working pressure thereof, and stating the nature of tests to "which the pressure vessel or ,plant and its fittings' (if any) have been subjectedjandevery pressure· vessel or plant so used in a factory shall be marked so as to enable it to be identified 100 as to be the pressure vessel or plant to which the certificate relates and the certificate shall be kept available for perusal by the Inspector. (e) No pressure vessel or plant shall be per­ mitted to be operated or used at a pressure higher than its design pressure, or the maximum per­ missibleworking pressure as shown in the certi- ficate. . . (7) In-service test and examination- (a) Every pressure vessel or plant· in service shall be thoroughly examined by a competent person- (i) externally, once in every six months, to ensure general condition of the vessel and, the . working of its fittings, and (ii) internally, once in every twelve months, to ensure condition of the walls, seams, and ties, both inside and outside ·the .vessel, soundness of the parts of the vessel, and the effects of cor- rosion:' . Provided that if by reason of the construction of a pressure vessel or plant, a thorough internal examination is not possible, .this examination may be replaced by a hydrostatic test which shall be carried out once in every two years. Provided further that for a pressure vessel or plant in continuous process which cannot be fre­ quently opened, the period of internal examination may be extended to four years; and' (iii) by an hydraulic test once in every period of four years: Provided that in respect of a pressure vessel or plant with thin walls, such as sizing cylinder made of copper or any other non_ferrous metal, periodic hydrostatic test may be dispensed with subject to the condition that the requirements laid down in sub-rule (8) are fulj'illed. Provided further that when 'it Is 'impracticable to carry out thorough external examination of any pressure vessel or plant. every six months as re­ quiredin sub-clause (i), or if owing to its cons­ truction and use a pressure vessel or plant cannot be hydrostatically tested as required in sub-clauses eii) and (iii), a thorough external examination of the pressure vessel or plant shall be. carried' out at least once in every two years and at least once in every four years a thorough systematic non-des­ tructive test like ultrasonic test for metal thick­ ness or other defects of all parts, the failure of which might lead to eventual rupture of the pres­ sure vessel or plant, shall be carried out. (b) The pressure for the hydrostatic test to be carried out for the purpose of thissub'rule shall be 1.25 times the design pressure or 1.5 times the maximum permissible working' pressure which- ever is less. ' (8) Thin walled pre8sure ve8sel.or plant- (a). In respect of any pressure vessel or plant of thm .walls such as sizing cylinder made of copper or any. other. non-ferrous metal, the ma­ ximum permissible working pressure shall be re­ duced at the rate of 5 per cent of thee original maxim=. permissible working pressure for every year of Its use after the first five years 'and no SERIES [ No.5' such cylinder shall be. aIlowed to continue to be used for more than twenty years after it was first. taken into uSe. (b) If any information as to the date of cons­ truction, thickhess of waIls, or maximum permis­ sible working pressure is not available, the age of such pressure vessel or plant shall be deter­ mined by the competent person in consultation with the Chief Inspector from the other parti­ culars available with the manageI'. (c) Every new and. second hand pressure vessel or plant of thin walls to' which repairs likely to affect its strength or safety have been carried out; sliall be tested before use to at least 1.5 times its· maximum permissible working pressure . (9) Report by competent per8on- (a) If during any examination any doubt arises. as to the ability of the pressure vessel or plant to work safely until the next prescribed examination, the competent person shaH enter in the prescribed register his observations, findings .and conclusions with other relevant remarks with reasons and may authorise the pressure vessel or plant to be used and kept in operation subject to a lowering' of maximUm permissible working pressure, or to more frequent or special examination or test, or subject to both these conditions. (b) A report. of every examination or test carried out shall be completed in Form 13 and shall be signed by the person making the exami­ nation or test, and shall be kept available for~ perusal by the Inspector .at all hours when the factory or any part thereof is working. (c) Where the report of any examination under this rule specified any conditions for securing the safe working of any pressure vessel or plant, the pressure vessel or plant shall not be used 'unless the specified condition is fulfilled. (d) The competent person making report of any examination under this rule, shall within seven days of the completion of the examination, send to . the Inspector a copy of the report in every case where the maximum permissible working pressure is reduced or the examination shows that the pressure vessel or plant. or any part thereof cannot continue to be used' with safety' unless certain repairs are carried out or unless any other safety measure is taken. Rule prescribed under sub-section (2) of Section 34: 69. Excessive weights. - (1) No woman or young' person shall,' unaided by another person, lift, carry ~ or move by hand oJ.' on head, any material, article; tool 'or appliance exceeding the maxinIum limit in weight set out in the foIlowing Schedule:- SCHEDULE Persons (a) Adult males (b) Adult females (c) Adolescent male (d) Adolescent female (e) Male child ... (f) Female child Maximwn weight of m~terial article, tool or appliance Q5 kgms. 30kgnIs. 30kgms; 20.kgms. 16 kgms. 13 kgms. ( - -~" , . (2»)"f9 woman or young person shall engage in Gonjunction with others, in lifting, carrying or moving by h~CI or on head" any. material, article, tool or appiiance if the weight thereof, exceeds the lowest weight fixed by the Schedule to sub-rule (1) for any' of the' persons engaged, multiplied by the number of the persons' engaged. Rule prescribed under Section 35: 70 .. l'rotection of eyes • ..c.. Effective screens or suit­ able goggles shall be provided for the protection of persons employed in or i,!- the immediate vicinity of the following processes:'--'- (a) The processes specified in Schedule I annexed hereto, being processeS which involve risk of injury to eyes from 'particles or fragments thrown off in the course of the·processes.· (bY The processes specified in Schedule II annexed hereto being processes which involve risk of injury to eyes by reasons of exposure to exces­ sive light or infrared or ultra-violet 'radiations. SCHEDULE I 1. Breaking, cutting, dressing or carving of bricks, stone, concrete, slag or similar materials by means of a hammer, chisel, pick or similar hand tool or by means of a portable tool driven by mechanical power, and the' dry grinding of surfaces of any such materials by means of a wheel or disc driven by, mechanical power, where, in' any of the foregoing cases, particles 'or fragments are liable to be thrown off towards the face of the operator in the course of the proceSS. 2. Dry grinding of surfaceS. of metal by applying them by hand to a wheel; disc or band driven by mechanical power, and of surfaCeS of. metal . . by means of a portable 'tool driven by mecha- nical power. . ' . 3. Dividing into separate parts of metal; bricks, stone, concrete or similar materials. by means of a.high speed saw driven by mechanical power or by means of an abrasive cutting-off wheel or disc driven by mechanical power. 4. TUI"Il.ing of metals or articles -Df metal, where particles of fragments are liable to be thrown off towards the face of the, operator in the course of the process. " 5. Drilling by means of portable tools, where par­ ticles or fragments are liable to be thrown off . towards the face of the operator in the course of the process. 6. Welding and cutting of metals by means of an electric, oxy-acetylene or similar process. 7. Hot fettling of steel casti~g by, means of flux injected burner or air torch, and de-seaming 'of metal. " . , 8.' Fetfling of metal castings involving the removal of metal, including runners,. gates and risers, . and removal of any other material' during the COurse of such fitting. 9. Chipping of metal, and chipping, knocking out, cutting out or cutting off of cold rivets, belts, nuts, lug:;;; pins, cellars or similar articles from any' structure or' plant', or from ,part of any 101 structure or plant, by means of a. hammer, chisel, punch or similar band tool, or by. meanll of a portable tool driven by mechanical power. 10. Chipping or scurfing of paint, s.cale, ,slag, .rust or other corrosion from the surj'ace metal and other hard materials by means of a hand tool or by a portable tool driven by m~chani~al power., 11. Breaking of scrap metal bY,means of a hammer or by means of a tool driven by mechanical power. 12. Routing of metal,' where particles or fragments are liable to be thrown ofr towards the face of the operator in the cour,se'of the process. 13. Work with drop hammers'andpower hammers used iIi either case for the' manufacture of forgings, and work by any person not working with such hammers, whose work is'carried on in such circumstances and in 'such a 'position that particles or fragments. are liable to be thrown off towards ,his face during work with drop hammers'or power hammers. ' 14. Work at a furnace where there is risk to the eye from molten metal. 15. Pouring or skimming' of moiten metal. . 16. Work involving 'risk to the eyes from hot sand being thrown off. " 17. TUrning or dressing of an abrasive .wheel. 18. Handling in open vessels'. or manipUlation of strong acids, or dangerous' corrosive liquids or materials, . and operation,.; maintenance ,or' dis­ mantling of plant or any part of plant, being plant or part of 'plant which contains or has con­ tained such acids,liquids or materials, unless the plant. orRart of pl3;J;lt has, ,been so prepared (by IsolatIOn, reductIon of pressure or other­ wise), treated, or designed and constructed as to prevent risk of injury. '. . 19. Any other process wherein there is a risk of in­ jury to eyes from particles or fragments thrown off during the course of the process. , '/. SCHEDULE II . 1.Wei<'1~g or cutting of metals., by means of an electrIcal, oxy-acetylene or ~imilar process: 2, All work on furnace~' wh~r~" th~re is risk of . e~osure to excessive. lighf9rinfra~redradia- tIons. . " 3. Process such' as rolling, casJing or forging of met~ls,~here ti.'ereis risk,bf. exposure to ex- ceSSIve hght or mfra-red radiations.. ., 4. :\~y other process wher~inthereisa ri~k of mJ~to eyes from .exposureitoexcessive light or mfr~-red or ultra-violet radiations. Rule prescribeduni:!er sub-se~t;on(6) of. Section 36: , 71. Minimum dimensions of maD.-holes.'-Everv ?ham~er, tank, vat, pipe flue or otliercOnfiriedspace m wh~cl;1 persons may have to enter and which may' ?Ontam ~angerous fumes' to suchan' extent as to mvolve nsk of the. persons, being 'overcome thereby, shall, unless there IS other effective:'mea:ns of egress, , 102 be provided with a man-hole which may be rectan­ gular, oval or circular in shape, and which shall- (a) in the case of rectangular or oval shape, be . not less than 40 centimetres long and 30 centi­ metres wide; (b) in' the case of a circular shape, be not less than 40 centimetres in diameter. Exemption under sub-section (5) of Section 37: 72. Exemptions. - The requirements of sub-sec­ tion (4) of Section 37 shall not apply to the following processes carried on in any factory: - (a) The operation of repairing a water sealed gas-holder by the electric welding process, subject to the following conditions:- (i) The gas-holder shall contain only the following gases, separately or mixed at a pres­ sure greater than atmospheric pressure, namely, town gas, coke-oven gas, producer gas, blast furnace gas or gases other than air, used in their manufacture: . Provided that this exemption shall not apply to any gas-holder containing acetylene or mixture of gases, to which acetylene has been added intentio­ nally; (ii) . Welding shall only be done by the electric welding processes and shall be carried out bv experienced operatives ljIlder the constant su­ pervision of 'a competent person. (b) The operations of cutting or welding steel or wrought iron gas mains and services by the application of heat, subject to.the following condl­ tions: '- (i) The main or service shall be situated' in the open air, and it shall contain only the follow­ ing gases, separately or mixed at a pressure greater than atmospheric pressure, namely. town gas, coke-oven gas, producer gas, blast furnace gas or gases other than air, used in their manufacture; (ii) The main or service shall not contain acetylene or any gas or mixture of gases to which acetylene has been added intentionally; (iii) The operation sh.all be carried out by an experienced person or persons and at least two persons (including those carrying out the operations) experienced in work on gas mains and over 18 years of age shall be present during the operation; (iv) The site of the operation shall be free from any inflammable or explosive gas or vapour; (v) Where acetylene gas is used as a source of heat in connection with an operation, it shall be compressed and contained in a porous subs- tance in a cylinder; and . (vi) Prior to the application of any flame to the gas main or, service, tlris shall be pierced or drilled and the escaping gas ignited. ( c) The operation of repairing an oil tank on any ship by the electric welding process, subject to the following conditions: - SERIES I No. 5 (i) The only oil contained in the tank shall have a flash· point of not less than 66'C (close test) and a certificate to this effect shall be obtained from two competent analysts; (ii) The analyst's certificate shall· te kept available for inspection by an Inspector, or by any person employed or working on the ship; (iii) The welding operation shall be carried out only on the exterior surface of the-tank at aplace- (a) which is free from oil or oil leakage in inflammable quantities; and (b) which is not less than 30 centllnetres below the nearest part of the surface of the· oil within the tank; and . .(iv) W:elding shaiI be done only by the elec­ t:'C welding and shall be carried out by expe­ nenced operatorsljIlder the constant supervi­ sionof a competent person; . Rule prescribed under Sections 38 and 41: . 73 . .Fire. -,ct) Processes, equipment, plant, etc. mvolvmg senous explosion and serious fire ha­ zards~ (a) All processes involving serious explosion . and flash fIre hazard shall be located in segregated buildings where the. equipment shall be so arranged that only a mininIum number of emplo­ yees are exposed to such hazards at anyone time. (b) All mdustrial processes mvolving serious fire hazard shall be located in buildings or work places separated from one another by walls of fire-resistant construction. . (c) Eq~pment and plant involving serious fire or flash fIre hazaI'<l: shall, wherever possible, be so constructed and illstalled that in case of fire they can be easily isolated. ' . (~) Ventilation ducts, pneumatic conveyors and slmilar equipment involving a serious fire risk shall be provided 'with flame-arresting or auto­ matic fire extinguishing appliances. (e) ~ all workplaces having serious. fire· or flash ·fIre hazards, passages between machines installations or piles of material shall be at least 90 cm. wide. (2) Access for fire fighting. - Buildings and plants sha.!l be so laId out, and roads, passageways, etc. ~o, m.amt:Uned as to pennit unobstructed access for flre fIghtmg. . (3) . Prot~ction against lightning. _ Protection from hghtmng shan be provided for.,-- . (i) buildings in which explosive or hlghly in­ flalllmable substances are manufactured, used handled or stored.; . ' (ii) storage tanks containing oils, paints or other inflammable liquids; (iii) grain elevators; and , (iv) buildings, tall chinmeys or stacks Where inflalllmable gases, fumes, dust or lint are likely­ to be present. 3RD MAY, 1985 (VAISAKA 13,,-,1~9~07,-")~ _________ . 103 .-_ .. --_ .. _-------=-'-'- (4) Explosives. - All explo.sives shall be h~dled, transported, stored and used ~ accordance WIth the provisions in the Indian ExploSlves Act, 1884. (5) Preoav,tions. agai=t ignition. -. Wherever there is danger of fire or explosi?n from accu­ mulation of inflammable or explOSIve substances in air- (a) all electrical apparatus shall either be ex­ cluded from the area of risk or they shall be of such construction and so installed' and maintained as to prevent the danger of their be~g a source of ignition;. (b) effective measures shall be adopted for pre­ vention of accumulation of static charges to a dangerous extent; (c) workers shall wear shoes without iron. or steel nails .or any other exposed ferr~>u~ matc1'lals which is likely to cause sparks by frIction; (d) smoking, lighting or carrying of matches, lighters or smoking materials shall be prohibited; (e) , transmission belts with iron fasteners shall not be used; and '(f) all other precautions,' as are reasonably practicable, shall be taken to prevent initiation of ignition from all other possible sources such as open flames, frictional sparks, overheated surfaces of , machinery or plant, chemical or physical-che­ mical reaction and radiant heat. (6) Spontane1YU8 ignition. - Where materials 'are likely to induce spontaneousiguition, care shall be taken to. avoid formation of air pocket and to ensure adequate ventiiation. (7) Gylinderscontaining compressed gas. - Cylinders containing compressed gas may only be stored in open if they are protected against excessive' variation of temperature, direct rays of suti, or con- . tinuous dampness .. Such cylinders shail never be stored near highly inflammable substances, fUrIlaCeS or hot processes. The room where such cylinders ar8 stored shall have adequate ventilation. (8) Storage of inflammableliquids.- (1) The quantity of inflammable liquidS in any work room shall be the minimum required for the prOcess' or processes carried on in such room. Inflammable li­ quids shall be stored in suitable containers with close fitting covers: . Provided that not more than 20 litres of inflam­ mable liqUidS having a flash point of 21 'C or less shall be kept or stored in any work room. (b) Inflammable liquids shall be stored in closed containers and in limited quantities in well venti­ lated rooms of fire resisting construction which are, isolated from the remainder of the building by fire walls and self cloSing fire doors. (c) Large quantities of such liquids shall be stored in isolated adequately v~ntilated building of fire. resisting construction Or in storage tanks,pre­ ferably underground and at a distance from any building as required in the Petroleum Rules, 1976. (d) Effective' steps shall be taken to prevent leakage of such ,liquids into basements, sumps or drains and to confine any escaping liquid within safe limits. .. " (9) Accumulation of inflaminable dust, gas,. fume or vapour in air or inflammable waste materIal. on the floors-'- \ (a) Effective steps shall be taken for removal or prevention of the accumulation' in the air of inflammable. dust, gas, fume or vapour to an ex­ tent which is likely to be dangerous. (b) No waste material of 'a inflammable nature , shall be perinitted to accilln,ulated on the floors and shall be removed at least once in a,' day or shift, and more often, when"possible. Such mate­ rials shall be placed in suitable metal .containers with covers wherever possible. . .- . (10) Fire exits. - (a) In this rule- (i) "horisontal exit"· means' an arrangement which allows alternative egress from a floor area to another floor at or near the' same level in an adjoining building or an adjoining part of the same building with adequate separation; and (ti) "travel distance" me~s the distance an occupant has to travel to reach an exit. (b) An exit may bea dooIway, corridor, pa~age­ way to an' internal or external. stairway or to a verandah. An exit may also include a horizontal exit leading to an adjoining building at the same level. (c) Lifts, escalators and revolving doors shall not be considered as exits for the purpose. of this sub- -rule. . (d) In every rOOlIl of a factory exits sufficient to permit safe escape of . the occupants in case of fire or other emergency .shall be provided which shall be free of any obstruction.- (e) The exits shail be c1earlyvjsible and suitably iliumittated with. suitable arrangement by whatever artificial lighting adopted for this purpose, to main­ tain the required iliumination in case of failure of the nonna! source of electric supply. '(f) The exits shall be marked, itt a language understood by the majority of the workers. (g) Fire resisting doors or roller shutters shall be provided at appropriate places al()ng the escape routes to prevent spread of fire,andsmoke, parti­ cularly at the entrance of lifts or stairs where funnel or flue effect may be created indu,cing an upward spread of fire. >. ' . \. : (h) All exists shall provide continuous means of agress to the exterior of a J?uilding,or to an exterior open space leading to a street. (i) Exits shall be so lOcated tb.a.t the travel dis-' tance on the floor shall not exce~'30 metres. (j) In case of those factories where high hazard materials are stored or' used, the travel distance to the exist shall not' exceed 22.5metresaitd there . shall be at least two ways of escape from every room, : howsoever small, excepttbiletrooms, so located that the points of access thereto are out of or suitably shielded from areas of high hazard. (k) Wherev~r more than one exit)s reqUired. for ~ny r<)oIDspace or floor, ,exits shallbe placed as remote from. each other as possible and shall be 104 . arranged to provide direct access in separate direc­ tions from any Point in the area served. (I) The unit of exit width used to measure capa­ city of any exit shalJ'be 50 cm. A clear width of 25 cm. shall be counted as an additional half unit. Clear width of less than 25 cm. shall not be counted for exit width .. (m) Occupants per unit width shall be 50 for stairs and 75 for do()rs. (n) For determining the exits required, the occu- . Dant load shall be reckoned on the basis of actual llUmber of occupants within any floor area or 10 square metres per person, whichever is more. (0) There shall not be less .than two exits serving every floor area above and below the ground floor, and at least one of them shall be an internal enclosed stain'Vay. (p) F.or every building or structure used for storage only, and every section thereof. consid.ered separately, shall· have access to at Ieast.one eXit so arranged and located as to provide a suitable means of escape for any person employed therein, and in any such room wherein more than 10 persons may be normally present,' at least two separate means of exit shall be available, as remote from each other Q s practicable. (q) Every storage area shall have access to at least oJ?e means of exit which can be readily open~d. (r) Every exit doorway shall open into an enclosed stairway, a horizontal exit on a corridor or passage­ way providing continuous and protected means of agress. (s) No exit doon'Vay shall be less than 100 cm. in width and not less, than 200cm. in height. . (t) Exit doorways shall open outwards, that is, away from the room but shall not obstruct the travel ".long any exit. No door when opened, shall reduce the required width of stainvay or landing to less'than 90 cm. Overhead or sliding doors shall not be installed for t.lJ.is purpose. . (u) An exit door shall not open immediately upon a flight· of stairs. A landing equal to at least .the \vidth of the door\Vay shall be provided in the stair­ way at each doonvay .. The.level.of landing shall be the same as that of the floor which it serves. (v) The exit doorways sllall be openable from the side:which they serve without the use of a key. (w) Exit corridors and passageways shall be of a width not less than the agregate required width of exit doonvays leading from ·there in the direction of travel to the exterior. (x) Where stairways discharge through corridors and passageways, the 'height of the corridors and passageways shall not'be less than 2.4 metres.· (y) Internal stairs shall be constructed of non­ -combustible materials throughout. (z) Internal sj:airs shall be constructed asa self­ -contaiJ?ed unit Vljdi;h at .least one side adjacent to an ext~rna:l walland shall<be completely el:\closed. (aa)A staircase shall not be arranged around a lift shaft unless: the latte~ i~ .. totally enclOsed by .a • ,. -, "F ; ' ' '..',' .' __ • SERIES. I No.5 material having a fire-resistance rating not lower than that of the type. ofconstructioJ? of the former. (bb) Hollow combustible construction shall not be permitted. (cc) The minimum width of an internal staircase shall' be 100 cm. (dd) The mininlUm \vidth of treads without nosing shall be 25 cm. for an internal staircase. The treads shall be constructed and ,maintained in a manner to prevent slipping.' (ee) The maximum' height of a riser slJan be 19 cm. and the number of risers shall be limited to 12 per flight. (ff) Hand rails shall be provided ;'lith a minimum height of 100 cm. and shall be firmly supported. (gg) The use of spiral staircase shall be' limited to low occupant load and to a bUilding of height of 9 metres, unleSs they are connected to platform such as balconies and terraces to allow escapees to pause. A spiral staircase shall be not less than 300 cm. in diameter and have adequate head room. (hh) The width of a horizontal exit shall be the same its for the exit doonvays. . (ii) The horizontal exit shall be equipped with at least one fire door of self closing type.' (jj) '['he floor area on the opposite or refuge. side of a horizontal exit shall be sufficient to accommo­ date occupants of the floor areas served, allowing not· less than 0;3 square metre per person. The refuge area shall be provided with exits adequate to meet the requirements of this sub-rule. At least one of the exits shall lead directly to the exterior or street. (kk) Where there is difference in level between connected areas for horizontal exit, ramps not more than 1 in 8 slope shall be provided.· For this purpose stops shall not be used. (ll) Doors in horizontal exits shall be openable at . all times.' (mm) Ramps with a slope of not more than 1 in 10 may be substituted for the requirements of stair­ case. For all slopes exceeding 1 in 10 and wherever the use is such a.s to involve danger'of slipping, the' ramp shall be surfaced with non-slipping material. (nn) In any building not provided WIth' a.utomatic fire alarm a manual fire alarm· system shall be provided if the total, capacity of th" building is over 500 persons, or if more than 25 persons are employed above or below the ground floor, except that no manual fire alarm shall be required in one­ -storey bUildings where the entire area is undivided and all· parts thereof are clearly visible to all occupants. (11) First-aid-fire fighting arrangements- (a) In every factory there shall be provided and maintained, adequate and suitable fire fight­ ingequipment for fighting fires in the early stages, (hereinafter referred to as first-aid. fire fighting equipment) in this rule, (b) The types of first-aid fire fighting equip­ mentto be provided shall be determined by consi- .. i 3RD MAY, 1985 (V AISAKA 13, 1907 ! __ dering the different types of fire risks which are classified as follows: - (i) "Glass A fire" - Fire due to combustible materials such as wood, textiles, paper, rubbish and the like. 1. "Light hazard" - Occupancies like offi­ ces, assembly halls, canteens, rest-rooms, ambuIance rooms and the like; 2. "Ordinary hazard!' - Occupancies like saw mills, c!'-rpentry shop, small timber yards, book binding shops, engineering workshop and the like; 3. "Extra hazard" - Occupancies like large' timber yards, godowns storing fibrous mate­ rials, flour mills, cotton mills, jute mills, large wood' working factories and the like; (ii) "Glass B fire" - Fire due to inflammable liquIds like oil, petroleum products, solvents, grease, paint, etc. (iii) "Glass G fire" -,-- Fire arising out of gaseous substances. (iv) "Glass D fire" - Fire arising from re­ active chemicals, active metals and the like. (v) "Glass E fir:e" - Fire involving electrical equipment and delicate machinery and the like. (c) The number and types of first-aid,fire fight­ ing equIpment to be provided shall be as per the following scale: (i) Class A fire--'- 1. Light hazard - One 9 litre water bucket for' every 100 square metres of floor area' or 'part thereof and one9-litre water type (soda­ -acid or gas pressure or bucket pump) extin­ guIsher shall be provided for each 6 buckets or part thereof with a minimum of one extin­ guisher and two buckets percompartmelit of the building. These equipment shall be so distributed over the entire floor areas that a person shall have to travel not more than 25 metres from any point to reach the nearest equipment. , 2. Ordinary hazard - One 9-litre' water bucket for every 100 square metres of floor area or part thereof and one 9-litre, water type (soda-acid, gas pressure or bucket pump) extinguisher shall be provided for each six buckets or part thereof, with a minimum of 2 extinguIshers and 4 buckets per compart­ ment of the building. These equipment shall be so distributed over the entire floor area that a person shall have to travel not more than 15 metres from any point to reach the nearest equipment. 3. Extra, hazard - The scale of equipment would be what is prescribed for ,ordinary hazard and, in addition, ,such extra equipment as, in the opinion of the Inspector, are neces­ sary having regard to the special nature of occupancy. Provided that in special cases, the Inspector, after taking into conSideration the circums­ tances, authorise that the buckets prescribed in 105 this clause maybe dispensed with, provided the number of the extinguIshers provided is double than that what is prescribed. (ii) Glass B fire - There shall be at least one fire extinguIsher either foam type or carbon dioxide or dry powder type per 50 square metres of floor area and shall be so distributed that no person is required to travel more than 15 metres from any point to reach the' nearest ' equipment. In addition to ,the requirements of extinguishers specified here, requirements as laid down in clause' (i) shall also be prOvided. (iii) G,lass G fire - Carbon ,dioxide or dry chemical powder extinguishers shall be provided near each plant or group of plants. (iv) Glass D fire - Special dry powder (chlo­ ride based) type o~ extinguIshers, or· sand buckets shall be provided on a scale as laid down for Class B fire. The Inspector may require a ' higher scale of, portable equipment to be' pro­ vided depending upon the risk involved. (v) Glas8 E fire-Carbon dioxide or dry powder type extinguIshers shall be provided near each plant or group of plants depending upon the risk involved. (d) The first-aid fire fighting equipment shall conform to the relevant Indian Standards. (e) As far as possible the first-aid fire fighting equipment shall all be siinilar ill shape and appear­ ance and shall have the same,method of operation. (f) All first-aid fire fighting equipment shall be placed in a conspicuous position and shal!be readily and easily accessible for immediate use. Generally, these equipment shall be placed 'as near as possible to the exits or stair landing or normal routes of escape. (g) ~l water buckets and bucket pump type extinguIshers shall be filled With clean water. All sand buckets shall be filJ.ed With clean, dry, and fine sand. (h) AlL other extinguIshers shall be charged appropriately in accordance With the instructions of the manufacturer. (i) Each first-aid fire fighting equipment shall be allotted a serial number by which it shall be referred to in the records. The folloWing details shall be painted with white paint on the body of each equipment: , 1. Serial number. 2. Date of last refilling; and 3. Date of last inspection. e (j) First-aid fire fighting eqrtipment shall be , placed oh, platforms or in cabinets in such a way that,their bottom is 75 cms. above the floor level. Fire buckets shall be placed on hooks attached to a suita~le stand or wallin such a way that their bottom IS 75 cms. above the floor level. Such equip­ ment if placed outside the building,' shall be under sheds or covers. (k) All extinguIshers shall be thoroughly cleaned ~d rech.argedi~mediately after,discharge. Suffi­ Clent ~fill material shall be kept readily available for thiS purpose at all times. 106 _____ ~_ __ _ _ __ _ ____ _ _______ ~ ______ ~~_~ _______ ._~_~_ SERIES I No_ 5 . (1). All first-aid fire fighting equipment shall be subjected to r()utine maintenance, inspection and testing to be carried out by properly trained per­ sons. Periodicity of the routine maintenance, ins­ pection and test shall conform to the relevant Indian Stand;n'dS. (12) Other fire fighting arrangements - (a) In every factory, adequate provision of water supply for fire fighting shall be nuide and where the amount of water required in litres per minute, as calculated from the formula A + B + C + D divided by 20 is 550 or more, power driven· trailer pumps of adequate capacity to meet the requirement of water as calcu­ lated above shall be provided and maintained. In the above formula- A = the total area in square metres of all floors including galleries in all buildings of the factory; B = the total area in square metres of aU floors and galleries including open spaces in which combustible materials are handled or stored; C =' the total area in square metres of all floors over 15 metres above ground level; and . D = the total area in square metres of all floors of· all buildings other than those of fire resist­ ing construction. Provided that in areas where the fire risk involved does not require use of water,' such areas under B, C; and Dmay, for the purpOse 'of calculation, be halved: I'rovided further that where tile areas under B, C or D are protected by permanent automatic fire fighting 'installations approved by any fire asso­ ciation or fire insurance companY,such areas may, for the purpose of calculation, be halved: Provided also that where the factory is situated at not more than 3 kilometres from an established city or town fire service,' the pumping capacity based on the amount of water arrived at by the formula above may be reduced by 25%; but no account shalIbe taken of this reduction in calcu­ lating water supply required under clause (a). (b) . Each trailer pump shall be provided with equipment as per Schedule appended to this rule. Such equipment shall conform 'to the relevant Indian Standards. .. (c) Trailer pumps shall be housed in a separate shed or sheds which shall be sited close to a principal source of watOir supplies in the vicinity of the main risks of the factory. (d) In factories where the area is such as CaImot be reached by inan-hauling of trailer pumps within reasonable' time vehicles with towing attachment shall be provided at the scale of one for every four trailer pumps with a minimum of one such vehicle kept available at all times. (e) Wa,ter supply shall be provided to give flow of water as required under clause (a) for at 'least 100 minutes. Atleast50% of this water supply or 450,000 litres whiChever is less, shall be in the form of static tanks' of adequate capacities (not less than 450,000 litres each) distributed rourid the factory with due regard to the potential fire risks in the factory. (Where' piped supply is provided,. the size of the main shall not be less than 15 centimetres diameter and it shall be capable of supplying a minimum of 4500 litres per minute at a pressure of not less than 7 kilograms per square centiIhetre). (f) All trailer pumps including the equipment provided with them and the vehicles for towing them shall be maintained in good ()ondition and subjected to periodical inspection and testing as required. (13) Personnel in charge of equipment and for fire fighting, fire drills, etc. - (a) The first-aid and other fire fighting equipment to be provided as required in sub-rules (11) and (12) shall be in charge of a trained responsible person. . (b) Sufficient number of persons shall be trained in the proper handling of fire fighting equipment as referred to in clause (a) and their use against the types of fire for which they are intended in order to ensure that adequate number of persons are available for fire fighting both by means of first-aid fire fighting equipment and other equipment. Wherever vehicles with towing attachment are to be provided as required in clause (d) of sub-rule (12) sufficient number of persons shall be trained in driving these vehicles to ensure that trained persons are available for driving them whenever the need arises. (c) Fire fighting drills shall be held at least once in every 3 months. (14) Automatic sprinklers and fire hydrants shall be in addition and not in substitution of the require­ ments in sub-rules (11) and (12). .. (15) If the Chief Inspector is satisfied in respect of any factory or any part of the factory that owing to the exceptional circumstances such as inadequacy of water supply or infrequency of the manufacturing process or for any other reason, to be recorded in writing, all or any of the requirements of the rules are impracticable or not necessary forthe protection of workers, he may ·by order in writing (which he may at his discretion revoke) exempt such factory 0: part of the factory from all or any of the provi­ SIons of the rules subject to conditions as he may by such order prescribe. . . SCHEDULE Equipment to be provided, with 'trailer pump F.'0r light trailer pump ofa capacity of 680 litres/ /mmute . 1 Armoured suction hose of 9 metres length, with wrenches. 1 Metal suction strainer. 1 Basket strainer. 1 Two-way suction collecting-head. 1 Suction adaptor. .10 Unlined or rubber lined 70mm'delivery hose of 25 metres length complete with -quick-re- lease couplings. .'.'. 1 Dividing bI;eaching-piece. 2 Branch-piece with 15 mm nozzles. 1 Diffuser nozzle. . '. . ,' .. 1 Standpipe' with blank cap. 1 Hydrant 'key. . . j 3RD MAY, 1985 (V AISAKA 13, 1907/ ______ ___________________________ _ 107 4 Collapsible canvas -buckets. . 1 Fire hook (preventor) with cutting edge. 1 25mm manila rope of 30 metres. length. 1 Extension ladder of 9 metres length (where necessary) . ·1 Heavy axe. 1 Spade. 1 Pick axe. 1 Crowbar. 1 Saw. 1 Hurricane lamp. 1 Electric torch. - 1 Pair of rubber gloves. For large. trailer pump of a capacity of 1800 Iitres/ /minute 1 Armoured suction hose of 9. metres length, with wrenches. 1 Metal strainer. 1 Basket strainer. 1 Three-way suction collecting head. 1 . Suction adaptor :14 Unlined or rubber lined 70 mm. delivery hose of 25 metres length complete with quick-release couplings. 1 Dividing breaching-piece. 4 Branch pipes with one 25 rom. two 20 mm. and one diffuser nozzles. 2 Standpipe with blank caps. 2 Hydrant keys. 6 Collapsible canvas buckets. 1 Ceiling hook (preventor) with cutting edge. 1 50 rom. manila rope of 30 metres length. 1 Extension ladder of 9 metres length (wher~ necessary) . 1 Heavy axe. 1 Spade. 1 Pick axe. 1 Crowbar. 1 Saw. 1 Hurricane lamp. 1 Electric torch. 1 Pair of rubber gloves. NOTE: If it appears to the Chief Inspector of Factories that in any factory the provision of brea­ thing apparatus is necessary he may by order in writing require the occupier to provide suitable brea­ thing apparatus in addition to the equipment for light trailer pump or large trailer pump as the case may be. . Rule prescribed under Section 40-B: 74. Safety Officers. - (1) Qualifications.~ (a) A person shall not be eligible for appoint­ ment as a Safety Officer unless he - (i) possesses- (aa) a ·recognised degree in any branch of engineering or technology and has had prac~ tical exp~rience of working in a factory in a supervisory· capacity for a period of not less than 2 Years; or . (bb) a recognised degree in. physics or chemistry and has had -practical ·experience of working in a factory in a supervisory capa­ city for a period of not less than 5 years; or (cc) a recognised diploma in any branch of engirieering or·technologyand has had practi, cal experience of working in a factory in a supervisory capacity for a period of noL less than 5 years; (ii) possesses a degree or diploma in indus­ trial safety recognised by the Government in tJojs behalf; and (iii) had adequate knowledge of thelangnage spoken by majority of the workers··in the region in which the factory where·he isio be appointed is· situated. (b) Notwithstanding the provisions contained in clause (a), any person who-'- , . . (i) possesses a recogniked degree or diploma in engineering or technology or a degree in phy­ sics or chemistry and has had experience of not less than 5 years in: a department- of the Central or State Governnient which deals with the administration of the" Factories Act, 1948 or the Indian Dock Labourers. Act, 1934; or (ii) possesses a recognised degree or diploma in engineering or technology or a degree in phy- .. sics or chemistry and has had experience of not less than 5 years, full time, on training, educa­ tion, consultancy or research. in the field of ac­ cident . prevention in industry or in any institu- tion or Government department; .. shall also be eligible for appointment as a Safety Officer: . - .. . . Provided that the Chief Inspector may, suj>ject to such conditions as he may specify,grarit exemp­ tion from the requirements Of this sub~rule, if in his opinion, a suitable person possessing the ne­ cesl3ary ,qualifications and experience is not a,vail- able for appointment. . .~ Provided further that, in the. c.ase of a person who. has been working as a Safety 01ficer for a period of not less than 3 years on the date of com­ mencement of this rule, the Chief Inspector may, subject to such conditions as he'may specify, relax all or any of the above said .. qualifications. (2) Conditions of service - (aX·· Where the num­ ber of Safety Officers to be appointed in a factory as required by a notification in the Official Gazette exceeds one, one of them shall be designated as the Chief Safety Officer and shall have a status higher than that of the others. The Chief Safety Officer shall be in overall charge of the safety functions as envisaged in sub-rule (3), the other Safety Officers shall be working under his control.' . . , (b) The Chief Safety Officer or. the Safety Officer !n the case of factories where onlyop.e Safety Officer IS required to be· appointed, shall be given the status of a senior executive. and he shall work directly under the control of the chief executive of the factory. All other Safety Officers shall be· giy~n appropriate status to .enable them todischarge.their.functions effectively~ ..., (c), The s~aleof·pay ,and the·. allowances to be grante~ to. the SafetYOf~icersin(!ljidiI).g the Chief Safety Officer; and the other condit~ons of their·ser­ vice shall be the same as those of the (jther officers of SERIES I No.5 108 ~-~- --------~--~--~~-~--.-- cOl'responding status in the factory, i. e. those offi­ cers reporting directly to the Chief Executive. (d) In the case of dismissal or discharge, a Safety Officer shall have a right to appeal' to the Go­ vernment whose decision thereon shall be final. (3) . Duties of safety Officers - (a) The duties of a Safety Officer shall be to advise and assist the factory management in the fulfilment of its obliga­ tlons,statutory or otherwise,· concerning prevention of personal injuries and maintaining a safe working environment. These duties shall include the follow­ ing, namely- (i) to advise the concerned departments in plan­ ning and organising lTIeUSUres necessary for the effective control of personal injuries; (ii) to advise on safety aspects in all job stu­ dies, and to carry out detailed job safety stu­ dies of selected jobs; (iii) to check and evaluate the 'effectiveness of the action taken or proposed to be taken to pre­ vent personal injuries; (iv) to advise the purchasing and stores de­ partment in ensuring the availability of high quality personal protective equipment; (v) to provide advice on matters related to carrying out plant safety inspections; (vi) to carry out plant safety inspections in order to observe the physical conditions of work and the work practices ana procedures followed by workers. and to render advice on measures to be adopted for removing the unsafe physical con­ ditions a..'1d preventing unsafe actions by workers; . (vii) to render advice· em matters related to re­ porting and investigation of industrial accidents and diseases; (viii) to investigate selected accidents; Ox). to investigate the cases of industrial disea­ ses contracted ahd dangerous occurrences reporta­ ble under rule 132; (x) to advise on the maintenance of such re~ cords as are necessary relating to accidents, dan­ gerous occurr::mces and industrial· diseases; (xi) to promote setting up of safety committees· and to act as adviser and catalyst to such com- mittees; . (xii) to organise in association with the con­ cerned departments, campaigns, competitions, con­ tests and other activities which will develop and maintain the interest :of the workers in establish­ ing and maintaining Mfe conditions of work and procedures; and (xiii) to' design and conduct either indepen­ dently or in collabora.tion with the training de­ pm1merit, suitable training arid educational pro­ gramme for the prevention of personal injuries. (4) Facilities to qe provided to Safety 0fficers- An occupier of the factory shall provide each Safety Officer with such facilities, equipment and informa­ tion· as are necessary to enable .. him to discharge his duties effectively. ' . (5) Prohibition of performance of other duties­ No Safety Officer shall be required or permitted to do any work which is inconsistant with or detrimen­ tal to the performance of the duties prescribed in sub-rule (3). Rules prescribed under Section 41: 75. Buildings and structUl'CS. - No building, wall, chimney, bridge, tu:nnel, road, gallery, stairway, ramp, floor, platform, staging, or other structul;'e, whether of a permanent or temporary character, shall be constr.ucted, situated or maintained in any factory in such a Inanner as to cause risk of bodily injury. 76. Madtinery and Plant. - No maChinery, plant or equipment shall be constructed, situated,. operated or maintained in any factory in snch a manner as to cause risk of bodily injury. 77. Meth.ods of wor!{.-No process or work shall be carried in any f8.ctory in such a manner as to cause risk of bodily injury. 78. Stacking and storing of materials, etc. - No materials or equipment shall be stacked or stored in such a: manner as to cause risk of bodily injury. , 79. Ladders. - All ladders used ill replacing oelts shall be specially made and reserved for that work and provided with hooks or a..'l effective non-kid de­ vice. Ladders provided~ with hooks must have hooks fitted in such suitable position that they rest on the shaft when the bottom end of the ladder is resting on the floor. 80. Proteetion of workers attending to prbne movers. ~ (1) In every factory the work of oiling or attending to prime movers shall be done only by a specially t~8j!lcd adult male worker authorised to do "uch work whose name has been recorded in the register maintained in Form 10. , (2) Every such workel' while oilirig or attending to a prime mover shall wear tight-fitting clothing. (3) A worker required to wear tight-fitting cloth­ ing under sub-rule (2) shall be provided by the oc­ cupier with clothing which shall consist of at least a pair of closely fitting shorts and a closely-fitting half,s!eeve shirt or vest. Such clothing shall be re­ turned to the occupier on termination of service or when new clothing is provided. 81. Water-sealed gasholder. - (1) The expression "gasholder" means a water-sealed gasholder which has a storage capacity of not less than ·141.5 cubic metres. (2) Every gasholder shall be of adequate mate­ ria'! and strength of sound construction and properly maintained. (3) Where there is more one gasholder in a fac­ tory, every gasholder shall be marked in a conspi­ cuous position with a· distinguishing number or letter. (4) Every gasholder shall be thoroughly exami­ ned externally by a competent person at least once in a peripd of 12 months. (5) In the case of gasholder of which any lift has been in use for more than 10 years, the.internal state .. 109 §RD MAY, 1985 (V ~!~-:t_K_A_13,_1_90_7 ) __________ . ________ . __ _ --- ---------------- of the sheeting shall, within one year of the coming into operation of these rules 'a?d thereafte: at least once in every period of four years, be exammed by a competent person by· means of electronic or other accurate devices: . Provided that if the Chief Inspector is satisfied that such electronic or other accurate devices are not available, he may permit the cutting of samples from the crown end the sides of the holder: ... Provided further that if the above examination raises a doubt, an internal visual examination shall be made. (6) All possible steps shall be taken to prevent or minimise ingress of impurities in the gasholder. (7) No gasholder shall be repaired or demolished .except under the direct supervisioll of a person who, by his training, experience and knowledge of the necessary precautions against risks of explosion and of persons being overcome by gas, is competent to supervise such work. (8) (a) All sample discs cut under sub-rule (5) above shall be kept readily available f9r inspection. (b) A permanent register ·inForm 14 duly signed by the occupier or manager shall be ~aintained. (c) The results of examinations by the competent person carried out as required under sub-rnles (4) and (5) shall be recorded in Form 15. (d) A copy. of the report in Form 14 shall be kept in the register in Form 13 and both the register and the report shall be readily available for inspection. . (9) The Inspector of Factories shall inspect the gasholder at least once in a period of 12 months. Rules Prescribed under Sections 41 and 112: 82. Use of polymerising machines in the printing departments of cottontextiIe mills. - (1)· The following precautions shall be taken when fabrics are processed in polymerising or curing machine for fixing prints by the emulsion technique, namely,":'" (a) printed fabrics shall be thoroughly .dried by passing them over tIrying cans or through a hot flue or other ~qually effective means, before, the same are allowed to pass through the polymerising .machine; .(b) the exhaust flap or damper shall be provi­ ded with a hole or .opening so that at least two­ third of it is always open; , (c) infra-red ray.heaters 9f the . machines shall be cut off while running the prints; (d) . the electrical heater shall be connected to a separate circuit· and shall be provided with an isolation switch so as to ensure that it is comple­ tely cut off in an emergency; (e) the electrical.heater.shall be so located that if there is any dropping of the solvent due to con­ densation, it does not- directly come in contact with the heaters; (f) the drive of the exhaust fan shall be inter­ locked with the maui.drive of the machine in such a way that if the exhaust motor stops, the machine including all heating devices shall also stop; (g) the electrical heater shall have thermostats to reguIatethe temperature so that the heaters shall automatically cut off, if the temperature rises above the pre"set value; (h) adequate flaps shall be provided on top of the machine which can open and let off the fumes outside the workroom in case- of an explosion or in case any pressure is built up; (i) filter gauze shall be cleaned at least once a week; (j) exhaust duct shall be cleaned at least once a week; and (k) tension 9f the V -belt drive of the fans shall be cheked every week. . (2) The machine shall be eli:amined under the direct supervision of a responsible person designated by the occupier or manager, who by his experience and knowledge of necessary precautions against risks of explosion, is fit to snpervise such work. (3) A register shall be.maintained in which the details of the various checks carried nnder sub-rule (2) shall be entered and every entry made therein sha.!l be signed by tlle person making the c4ecks. 83. Shipbuilding and ship-repairing. - (1) Appli­ cation - This rule· shall . apply as respects work carned out in any of the operations as defined in sub-rule (2).· . (2) Definitions. - In this rule. unless there is anything repugnant to the subject or context, -:- (a) "certificate. of. entry" means a certificate which is given by q. person who· is a competent analyst and who is competent to give such certifi­ cates, and certifiesthaf he has in an adequate and suitable manner tested the atmosphere in. the· oil­ -tank or oil-tanks specified in the certificate and found that having regard to all the. circumstances of the case, including the likelihood or otherwise of the atmosphere being or becoming dangerous, entry to the oil-tank or oil-tanks without wearing breathing apparatus may in his opinion' be per- mitted; . (b) Uhot work'; means any wprk which in­ volves -'-c (i) welding, burning, soldering, brazing, sand blasting or chipping by spark producing toois; or . (il) use of· non-flameproof· electrical equip­ ment or equipment with internal combustion engines; and .includes any other work which is likely to .. produce sufficient heat capable 'of igniting inflam- mable gases or vapours; . . (c) "naked light certificate'·' means a certificate which is given by a person who is ·acompetent analyst and who is competent to give such certifi­ cates, and certifies that he has·in an adequate and. suitable manner,tested for,· the presence of inflammable yapour in the oil-tank, compartment, space or. pther part of. the vessel .specified in the' certificate and found it to be free therefrom .and that having regard to all the circumstances of the case including the likelihood or otherwise of the, . 110 atmosphere becoming inflammable, the use of naked lights, fires, lamps, or heated rivets or any hot work to be carried out may in his opinion be permitted in the oil-tank, compartment, space or other part of the vessel specified in the certifi­ cates; (d) "oil" means any liquid which has a flash point below 132 degrees centigrade and also in­ cludes lubricating oils, liquid methane, liquid butane and liquid propane; Explanation. - Flash point wherever it occurs in this rule shall be flash point as determined by Abel Closed Cup or Pensky-Marten Closed Cup procedures as described in 1. S. 1448-1960. '(e) "oil-tank" means any tank or compartment in which oil is or has been carried; (f) "the operation" means- (i) construction, reconstruction or breaking up of any ship or vessel, repairing, refitting, painting and, finishing; (ii) the scaling, scurfing or cleaning of its boilers (including combustion chambers or' smoke bores) ; and (ill) the cleaning of its bilges or oil-fuel tanks or any of its tanks last used for carrying oil. For the purpose of this defmition the expression "oil" means oil of any description whether or not oil within the meaning of foregoing defmition of that expression; (g) "ship and vessel" shall have the same mea­ nings as assigned to them in the Merchant Shipp­ ing Act, 1958; (h) "shipyard" means any yard or dry dock (including the precincts thereof) in which ships or vessels are constructed, reconstructed, repaired, refitted or finished; , , ' (i) "stage" means any temporary platform on or ftom which persons employed perform work in connection with the operations, but does not in­ clude a boatswain's chair; (j) "staging" includes any stage, and any up­ right, thwart, thwart pin, wedge, distance piece, belt or other appliance or material, not being part of the structure of the vessel, which is used in connection with the support of any stage, and any guard-rails connected with a stage, and (k) "tanks" means a vessel constructiid or adopted for carrying a cargo of oil in bulk. ACCESS AND STAGING (3) General access to vessels in a shipyard- All main gangways giving general access to a vessel in a shipyard, whether from the ground or from a wharf or quay and all cross gangways leading from such' a main gangway on to the vessel, shall- (a) be at least 60 centimetres wide; (b) ,be securely protected on each side, to a height of at least 90 centimetres by strongly constructed upper and lower hand-rails and by a secure toe-board projecting at least 15 centimetres above the floor; , , SERIES I No. 5 (c) be of good construction, sound material and atiequate strength; (d) be stable and, wherever practicable, of permanent construction; (e) be kept in position as long as required; and (f) maintained in good repair. (4) Access to dry dock.- (a) Every flight of steps giving access from ground level either to an altar or to the bottom of a dry dock shall be pro­ vided throughout on each side with a substantial , hand-rail. Inth€i case of an open side, secure fencing, to a height of at least 90 centimetres shall be pro­ vided by means of upper and low.er rails, taut ropes or chains, or by other equally safe means. For the purposes of this clause a flight of steps which is divided into two by a chute for materials, with no space between either side of the chute and the steps, shall be deemed to be one flight of steps. (b) Such hand-rails and fencing as aforesaid shall be kept in position save when and to the extent to which their absence is necessary (whether or not for' the purposes of the operations) for the access of persons, or for the movement of materials or vessels or for traffic or working, or for repair, but hand-rails orfEmcing re!lloved for any of these pur­ poses shall be kept readily available and shall be replaced as soon as practicable. (5) Access to vessels in dry dock. -'-- (a) If a ship is lying in a dry dock for the purpose of undergoing any of the operations, there shall be provided as means of access for the use of workers at such times as they have to pass to, otfrom, the ship or dry dock- (i) where reasonably practicable one or more ship's accommodation ladders; or (ii) one or more soundly constructed gangways or similar constructions. ' (b) The means so provided shall be not less than 55 centimetres wide properly secured 'and fenced throughout on each side to a clear height of 90 centimetres by means of upper and lower rails, taut ropes or chains or by any other safe means, except that in the case of the ship's accommodation ladder, such fencing shall b,e necessary on one side only pro­ vided where the other side is properly protected by the ship's side. (c) Where at any dry dock, there is a gangway giving access from an altar of the dock to a vessel which is in the dock for the ,purpose of undergoing any of the operations, and the edge of the altar is unfenced, adequate hand-holds shall be available for any length of the altar which workers' commonly use when passing be1!ween the'gangway and the nearest flight of steps which gives access to ground level. (6) Access to and from, bulwarl-.s -'- Where there is a gangway leading ,on to a bulwark of a vessel there shall be provided- (a) wherever practicable, a platform at the in­ board and of the gangway with safe means of acceSS therefrom to the docks; or (b) where ,such a platform is not practicable, a second gangway or stairway leading from a 111 3RD MAY, 1985 (VAISAKA 13, 1907) ---- _. __ ._._--- bulwark on the dock which are either attached to the first mentioned gangway or placed conti­ nuous to it in which case means of access, securely protected by fencing, shall be provided' from one to the other. (7) Access to staging, et(): - (a) Where outside staging is erected in a shipyard, there shall be pro­ vided sufficient ladders giving direct access to ~e stages having regard to the extent of the staglng and to the work to be done. (b) Where a vessel is under. construction or re­ construction and workers are bable to go forward or aft or athwartship across or along uncovered deck-beams, or across or. along floors; sufficient planks shall be provided on these deck-beams 01' on these floors for the purpose of access to or from places of work, and sufficient and ~uital>le po~able ladders shall be provided so as to glve access either from the ground or outer bottom plating to the top of the floor. (c) Without prejudice to any other provision 'in this rule requiring a greater width, no ,footway or passageway constructed of planks shall be less than 45 centimetres wide. (8) [,adders - (a) Subject to clauses (b) and (c) of this sub-rule, every ladder which affords a means of access, communication or support to a person shall- (D be soundly constructed and properly main­ tained; and (li) be of adequate strength for the purpose for which it is used and; . (iii) be securely fixed either- (aa) as near its upper resting place as pos-' sible, or (bb) where this isnn:practicable, at its base, or where such fixing is impractical?le a person shall be stationed at the base . of the ladder when in use to prevent. it from slipping; and (iv) unless there is other adequate hand-hold, extend to a height of at least 75 centimetres above the place of landing or the highest rung to be reached by the foot of any person working on the ladder, as the case may be, or, if -this is ~7 practicable, to the greatestpracticahle height; (b) Requirements (iii) .and (iv) of the preceding clause of this sub-rule shall not apply to fixed .ladders of a ship or to rope ladders. Effective mea.. sures by means of roping off or other similar means shaH be taken to prevent the use .of fixed ladders of a ship which do ~ot comply ,with requirements (i) and (ii) of this clause. (c) Any worker who removes any ladder and sets it up in a new position shall, as regards that ladder, comply with requirements (iii) of clause (a) of this sub-rule. covered with fibre, shall not be used. to secure a ladder used for the purpose of the operations. (b) A wire rope shall not be used to secu:e any such ladder unless its ends are ferruled, but thl~ pr,?­ vision shall not apply in the case of an end which IS so situated or protected that a person using ·the ladder is not liable to cOme into contact with it so. as to suffer injury. (10) Material for staging-Cal A sufficent _~upply of sound and substantial material· and appuances shall be available in convenient place or places for the construction of staging. (b) All planks and other materisls and appliances intended to 'be used or re-used for staging. shall be carefully exaiJiined before being taken into use or re-use in any staging. Every examination required by this clause shall be carried out by a person com- . petent for the purpose. . (11) Staging dry dock altars ana shoring sills- . (a) All staging and every part thereof shallbe of good construction, of suitable and sound mate­ rial and of adequate strength for the purpose for which it is used and shall be properly maintained, and every up-right and thwart shall be kept so fixed, secured or placed in position as to prevent, so' far as is reasonably practicable, accidental dis­ placement. (b) All planks forming stages shall be securely fastened" to prevent,them ·from slipping unless they extend 45 centimetres or more beyond the inside edge of the thwart or support on which they rest. (c) All staging used in connection with the ope­ rations shall be inspected before use, and there­ after at regl1iar and frequent intervals, by·a reS­ ponsible person. (d) All dry dock altars and shoring sills on or from which persons perform work in . connection with the operations shall be ofilound cOnstruction and properly maintained. (e) All paris of stages, all parts of footways or passageways constructed of planks, and all parts of dry dock altars or shoring sills, being parts on . or from. which -persons perform work in connection with the operations, shall so far as is reasonably practicable, be kept clear of all ,substances likely . to.make foot-hold or hand-hold ·insecure. (12) Upright used for hoistingpto¢k - (a) If any UprightforIiling part of staging if! 'used as a fixing for a pulley block for hoisting mliterials---' (i) it shall be properly housed in the ground or shall otherwise be adequately secured. so as to prevent it from rising; and (d) Rope lad!lers shall provide foot-hold of a depth including any space behind the . ladder of not less than 12 centimetres and, so -far as is reasonably practicable, suitable provision shall be made for pre- . venting such ladders from twisting. , (il), It shall be SUitably protected against da~age by the action of the chain or wire or other lIleansof securirig the pulley block to .the upright. .' (b) No upright forming part ofstagiug shall be used liS an anchorage for a load pulley block, unless the upright is not likely to be displaced by such Ilse. (13) Support of st(Lges on planks, -,Planks sup­ ported on the rungs of ladders shall not be used to . (9) Lashing of ladders - (a) A fibre rope,. or a rope made with strands consisting of wire cords - - --~~-------- support stages. . 112 (14) Suspended stages - (a) Stages suspended by ropes or chains shall be secured as far as possible so as to prevent them from sw:inging. (b) A fibre rope, or a rope made of strands con­ sisting of wire cores covered with fibre, shall not be used for 'suspending a stage except that fibre ropes may be used in the case of a stage of which the suspension ropes are reeved through blocks. (c) Chains, ropes, blocks and other gear used for the suspension of stages shall be of sound material, adequate strength and suitable quality, and in good condition .. (d) Appropriate steps shall be taken to prevent ropes or chains used for supporting a stage from coming into contact with sharp edges of any part of a vessel. (15) Boatswains' chairs. - (a) Boatswains' chair and chains, ropes or other gear used for their sus­ pension shall be of sound material, adequate strength and suitable quality and the chains, ropes or other gear shal! be securely attached: (b) Suitable measures shall be taken to prevent . where possible.- (i) the spinning of a boatswain's chair; (i.i) the tipping of a boatswain's chair; and (iii) any occupant falling therefrom. (16) Rising stage8. - All planks forming a rising stage at the bow end of a vessel shall be. securely fastened to prevent them from slipping. (17) Width of 8taging. - Without prejudice to the otlier provisions of these sub-rules, al!sta,ges shall be of sufficient width as is reasonable hi all . the circumstances of the case ·tosecure the safety of the persons working thereon. (18) Stage8 from which a person is liable to fall more than 2 metre8 .or into water. - (a) This sub-rule applies to stages from which a 'person is liable to fall a distance 'of more than 2 metres or into water in . which there is a risk of drowning (b) Every stage to which this sub-rule applies­ (i) shall so far as is reasonably practicable be closely boarded, planked or plated; (ii) shal! be so constructed or placed that a person is not liable to fall as aforesaid through it gap in the staging not being a gap necessary and no larger than necessary having regard to the nature of the work being carried on; and (iii) shall be at least 45 centimetres wide. (c) Every side of a stage to which this sub-rule applies shall- (i) if it is not a side immediately adjacent to any . part of a vessel, be fenced (subject to the provisions of clauses (d) to (g) of this sub-rule) with a guard-rail or guard-rails to a height of at least 1 metre above the stage, which rail or rails shall be so placed as to prevent so far as practi. cable the fall of 'persons from the stage or from any raised standing place on the stage; or (ii) if it is a' side immediately adjacent to any part ofa vessel,be placed as near as p~acticable SERIES I No.5 to that part having regard to the nature of the work being' carried on and to the nature of the structure of the vesseL . (d) In the case of stages which are suspended by ropes or chains, and which are used solely for painting, the fencing required by sub-clause (i) of the preceding clause may be provided by means of taut guard-rope or taut guard-ropes. (e) No side of a stage or, as the case may be, no part of the side of a stage n~ed be fenced in pursuance of .clause (c) (i) of this sub-rule in cases where, and as long as, the nature of the work being carried on makes the fencing of that side or, as the case may be, that part impracticable. (f) Guard-rails' provided in pursuance of clause (~) m of this sub-rule may be removed for the time and to the extent necessary for the access of persons or for the movement of materials, but guard-rails removed for either of these purposes shall be replaced as soon as practicable. (g) Where it is not reasonably practicable' to comply with the provisions of clause (c) (i) of this sub,rule, workers shall be provided with suitable safety belts equipped with life lines which are secured with a minimum amount of slack to a fixed structure. Further precautions against falls of persons, mate­ rials and articles--' (19) . Fencing of dry docks. - (a) Fencing shall be provided at or neal-the edges. of .a dry dock at ground level, including edges above flights of steps and chutes for materials. The height of such fencing shall be no point be less than 1 metre. (b) Such fencing as aforesaid shall be kept in . position save when and to the extent to which its absence is necessary (whether or not for the pur­ poses of the operations) for the access 'of persons, or for movement of materials or vessels or for . traffic or working, or for repair, but fencing removed for any of these purposes shall be kept readily avail­ able and shall be replaced as soon as practicable. (20) Protection oj Opening8. - (a) Every side or edge of an opening' ina deck or tank top of a vessel, being a side or edge which may be a source of danger to workers shall, except where and while the opening is securely covered or where the side or edge is protected to a height of not less than 75 centimetres by a coaming or other part ofihe vessel, be provided with fencing to a height of not less than 90 centi. metres above the edge or side and such fencing shall be kept in position save when and to the extent to which its absence is necessary (whether or not for purposes of the operations) for the ac.cess of persons, or' for the movement of materials, or for traffic or working, or for repair, but fencing removed "for any of these purposes shall be kept readily available and shall be replaced as soon as practicable. (b) Clause (a) of this sub-rule shan not apply'- (i) to that part of an opening in a deck' or tank top which is at the head of a stairway or ladder­ way intended to be used while the operations are being carried on; or (in to parts of a deck or tank top which are intended to be plated, except such parts where . the plating has necessarily to be delayed so that • $RD MAY, 1985 (VAISAK~~~, 1,-:90::..:7....,) ___ , ______________ .,--___ _ 113 the opening may be used for the purpose' of the , operations. (21) Fall or articles from stages. - Where workers are at work, outside a vessel on a stage adjacent to part of the structure, of the vessel and other workers are at work directly beneath that stage, the planks of the stage shall be in, such a position 'that no article liable to cause injury to the workers can fall between the planks, and the inside plank of the stage shall be placed as near as practi­ cable to the structure of the vessel having regard to the nature of the work being carried on. (22) Boxes for rivets, etc. - (a) Boxes or other, suitable receptacles for rivets, nuts,. bolts and welding , rods shall be provided for the use of workers. , , , (b) It shall be the duty of the workers to use, so far as practicable, the boxes or other suitable receptacles so provided. (23) 'Throwing down materials and articleS,':"" (a) Subject to the provisions of clause (b) of this sub-rule, parts of staging, tools and other articles and 'materials shall not be thrown down from a height where they are liable to cause injury to work7 ers,but shall be properly lowered. ' (b) When the work to be done necessarily involves the throwing down from a height of articles or materials, consp'icuous notice shall be posted to warn persons from' working or paSsing underneath, the place from which articles or materials may fall, or the work shall be done under the direct supervision of a competent person in authority. (c) No person 'shall throw down any articles or materials from a height except in accordance with' the rqeuirements of, this 'sub-rule: (24) Loose artiqks or' materials. - So far as practicable, steps 'shall be taken to minimise the risk arising from loose articles or materials being left lying about in any place from which they may fall on workers or persons p~sing Underneath. RAISING AND LOWERING (25) Secureness of loads. - (a) Loads shan be seCurely suspended or supported whilst being raised or lowered, and all rea,sonable precautions 'shall be taken to prevent danger from slipping or displace- ment. ' (b) Where by reason of the nature or position of the operations load is liable, whilat being m()ved by a lifting machine or lifting tackle, to come, into contaCt with any object so that the object may becoUle displaced, special measures shall be adopted to prevent the danger, so far as is reasonablyprac­ ticable. (26) Support of lifting machines and lifting tackle.- Every lifting machine and all lifting tackles shall be adequately and Suitably supported' or sus­ pended having regard to' the purpose for which it is used. ' " " , (27) Wire 'ropes, with' broken wires . ..,.. No wire rope shall be used if in any length of ten (iiametres the total number'of visible broken wires exceeds five per cent of the total number of wires, or if the rope -shows signs of excessive wear or corrosion or other serious defect.' ' (28) Splices in wire ropes. ~A, thimble or loop splice made in any wire rOP!lcshall have at least three tucks with a whole strand of the rope and two tucks with one half of th~ wires cut out of each strand. All tucks shall be against the lay of the rope: ' Provided that this sub;rulEVshall not operate to prevent the use of another form of splice which can be shown to be as efficient as the form of splice specified in this sub-rule. ; (29) Knotted chains, etc. - (a) No chain or wire rope shall be used when there is a knot tied in any part thereof. . (b) No ,chain which is shortened 01' joined to another, chain by means of bolts and nuts shall be used: ' . . -', . Provided that this does not 'exclude the use of a chain bolted "or, joined to another chain by' an ap­ proved and properly, constructed attachment. (30) Precautions against diimageto chtJ,ins and ropes . ..,.. Approw;iate ~teps shall,be taken tQ prevent, so far as practiqable, the use of chains or ropes for raiSing or lowering in circumstances in Which, they are in or liable to 'co!lle;,into ',contact ~th sharp edges of plant, materIals or loads, or WIth sharp edges of any part of the vessel on which work is being carried out, ' '(31)Loads on U/ting appliance8.~No load shall be left suspended from a lifting appliance otller than a self-sustaining,nianuallyoperated lifting appliance unless there is a competent person ,in charge of the, appliance while the load is so left. ' , , ~" , (32) Heavy loads. - Where there is reason to believe that a load being lifted or l{)wered on a lifting applianceweig~smore than20fonnes its weight ~hall be a.scertamed by means ofahaccurate weigh­ mg machmeor by the'estimation'Qf a person COUl­ pete!1t for the' purpose; and shalllle clearly marked on theloa'd.:, " ';, ' , Proyidedthat this sub-rule shallnot apply to any load lifted or lowered by a crane, which has either a fixed or a derrickitig jib and w:q,ich is lifted with ,~:lj;rovedtYll~,ofindicator in good,wQrking order . (a) indicates clearly to the driyer or person ope­ ratmg the crane ,when the loadb~ing carried ap­ proaches the safe working load ot the crane for the radius of the jill at which the IO,ad is carried- and , .' -,- , . .:,\\ -. - .' (b) gives anefficienl sounddiighalwhen the load moved is in excess of the Slffll working load of the crane at that radius. " . , Precautions againstasphyid~tio~, 'injurious funies' Qr explpsions. , ' \ (33rCertificatioit/or entry i11,to conJinedspace8 likely to contain dangerous fumes. - A space shall noLbe,cerj;ifiedunder"section 36(3)(8.) of the 'Act unless"':":';' ' . , ' ,', (a)effecti~estepshave been taken to prevent any ingress of dangerous fumes; '" 114 SERIES I No. 5 ~~------------------~--------------------~ (b) any sludge or other deposit liable to give off dangerous funies has been removed and the space contains no other material liable to give off dangerous fumes; and (c) the space has been adequatelY ventilated and tested for dangerous fumes and has a supply of air adequate for respiration: Provided that no account shall be taken for the purposes of clause (b) of this,sub-rule of any deposit or oilier material liable to give off dangerou~ fumes in insignificant quantities (34) Precautions against shortage of oxygen.­ No person shall enter or remain in any confined space in a vessel, being a confined space in which there is reason to apprehend that the proportion of oxygen in the air is so low as to involve risk of persons being overcome, unless either- (a) the space ,has been and remains ad~quately ventilated anci a responsible person has tested it and certified that it is safe for entry without breathing apparatus; or '(b) he is wearing a suitable br~athing apparatus arid a' safety belt securely attached to a rope, the free end of which is held by a person standing outside the confined space. (35) Rivet fires. - (a) Rivet fires, shall not be, taken into or used in or remain ill any confined space on board or in a vessel unless there is adequate ventilation to prevent the accumulation of fumes., (b) No' person employed shall move a rivet fire into any confined space on board or in a vessel unless he has been authorised by ,his employer to move the fire into that space. (36) Gas cylinders and acetylene generators. -(a) No cylinder which contains or has contained oxygen or any flammable gas or vapour at a pressure above atmospheric pressure and no acetylene generating plant, shall be installed or placed within 5 metres of any substantial source' of heat (including any boiler of furnace when alight) other than the burner or blowpipe operated from the cylinder or plant. (b) No such cylinder and no such plant shall be taken below the weather deCk ,in the case of a'vessel underl?oing repair, or below the topmost completed deck m the case of a vessel under construction, unless it is installed or placed in a partof the vessel which is adequately ventilated, to prevent any dange- rousconcentration of a gas or fumes. " (37) Further provision as to acetylene generators. -(a) The follOwing provisionS shall be observed as respects, any acetylene generating plant: _ ' (i) no such plant shall be installed or placed in any confined space' unless effective ,and suitable provision ,is made for securing and maintaining the adequate ventilation of that space so as to preyent, so far as practicable, any dangerous accumulatiori ,of gas; (ii) any person attending or 'operating any such plant shall have been ftilly instructed in its work­ ing and a copy of the maker's instructions for that type of plant shall be constantly available for his use; , (iii) the charging and cleaning of such plant shall so far as practicable be done during daylight; and (iv) partly spent calcium carbide shall not be , recharged into an acetylene generator. (b) No person shall smoke or strike a light or take a naked ,light, or a lamp in or ,into any acetylene generator house or shed or in or into dangerous proximity to any acetylene generating plant in the open air or on board a vessel: Provided that this clause shall not apply as res­ pects a, generator in the open air or on board a vessel which, since it was last charged, has been thoroughly cleaned and freed from any calcium carbide and acetylene gas., (c) A prominent notice prohibitingsmoking,naked lights and lamps shall be exhibited on or near every acetylene generating plant whilst it, is charged or is being charged or is being cleaned. . . . - - , (38) Oonstructionof plant for cUtting, welding or heating metal. - (a) Pipes or hoses for the supply 'of'Dxygen or any flammable gas or vapour to any apparatus for cutting, welding or heating metal shall be of good construction and sound material and be properly, maintairied. , ' . . (b) 'Such pipes ,or, hoses shall be securely attached to the apparatus and other connections by means of suitable clips or other equally effective appli­ ances. (c) Efficient reducillg and regulating valves for reducing the pressure of the gases shall be provided and maintained, in cOnllection with all cylinders containing oxygen or any flammable gas or vapour at a pressure above' atmospheric pressure while the , gases or Napours from such cylinders are being used in any process of cutting, welding or 'heating metal. (d) Where acetylene gas is used for cutting, welding Or heating metal ~ (i) a pr&perly constructed and efficient back­ -pressure valve and flame arrester shall be pro­ vided.and' maintained in the acetylene supply' .' pip~',.between. each, burner or blow-pipe and the acetylene generator; cylinder or "container from which it is supplied, and shall be placed as near as practicable to the ,burner or blow-pipe, except that these requirements shall not apply where an acetylene cylinder serves only one, burner or blow-pipe; and , " (ii) any hydraulic valve provided in pursuance .of the preceding sub-clause shall be inspected on each day by every person who uses the burner or blow-pipe on that day and it shall be the duty of every worker who used the burner or blow-pipe to' inspect the hydraulic valve accordingly~ (e) Theoperating valves of burners or blow-pipes to which oxygen or any flammable gas or vapour is supplied for the purpose of cutting, welding or heating metal shall be so constructed, or the ope­ rating .mechanism shall be so protected, that the valves cannot be, opened accidentally. (39) Precautions after use of apparatus for cutting, welding or heating metal.- (a) In the case of apparatus on board a vessel and used for .. r jRD MAY, 1985 (VAISAKA 13,1907) cutting, welding or heating meta:! with the aid of 'Oxygen or any inflammable gas or 'vapour supplied at a pressure above atmospheric pressure, the pre­ cautions specified in the following clauses' of this sub-rule shall be taken when such use ceases for the day or for a substantial period and the appa­ ratus is to be left on board, but need not be taken when such use is discontinued merely during short interruption of work. The requirements in clauses (c) and (d) of this sub-rule shall not apply during a meal interval provided that responsible person is placed in charge of the plant and equipment referred to therein. (b ) Supply valves of cylinders,. generators and .gas mains shall be securely closed and the valve key shall be kept in the custOqy of a. responsible ,person. (c) Movable pipes or hoses used for conveying oxygen or inflammable gas or vapour' and the weld­ ing and cutting torches shall, in, the. case of a vessel undergoing construction, be brought to the topmost .completed deck, or in the case of a vessel undergoing repair, to a weather deck or in either case to some other .placeof safety which is adequately ventilated to .prevent any dangerous concentration of gas· or fumes: . .' . . Provided that where, owing to the natur~ of the work, it is impracticable to comply with the fore­ .going requirements of this clause, the pipes or hoses shall b~ disconnected from cylinders, generators or gas mams, as the case may be. (d) . When cylinders or . acetylene generating plant have been taken below deck as permitted by clause (b) of sub-rule (36) such cylinder-s or acetylene .generating plant shall be brought to a weather deck or, in the case of a vessel undergoing construction, . to the hlpmost completed deck. . (40), Naked lights and hot work oil-carrying vessels. -. (a) Subject totheprovisions of clause (b) of thIS sub-rule and to the'provisions 'of sub­ -rule (48), and without prejudice to',the,provisions . 'Of sub-rules (46) and (47), no naked light, fire or lamp (other thana safety lamp of a type aoproved :for the purpose of this sub-rule) ~ , . . , , (i) shall be permitted to be applied. to, or,to be in, or any 'hot work permitted to be carried out in any part of a .tanker, unless, since oil was last carried in that tanker, a naked light certi- , '. ficate has been obtained and is in force in respect of those parts of the tanker. for which, in the opinion of a competent analyst, a naked light certificate is necessary: . Prov!-qed that a naked light," fire or lamp' of a' kind specified in writing by a competent analyst . may be applied' to, or be in, or any hot· work of a type specified by him carried on, any part of tile tanker so specified; .., , (ii) shall be permitted- (aa) ,to ,be in any oil-tank on board orin a vessel in' which oil-tank the oil last carried was oil having a flash point of less than 23 degrees centigr-ade or was liquid' methane, Jiquidpropane or liquid butane, nor any hot work permitted to. be. carried out in any such oil tank or vessel, unless a naked light certi- 115 ficate lias previously been obtained on'the same day and,. is in' force in respect of· that oil-tank and of any oil-tank, compartment or space adjacent thereto; (bb) to be applied to the outer surface of any oil-tank on board or in a vessel in which ·oil-tank the oil last carried was such 'Oil as ·af-oresaid nor any work of'·such a nature which is likely to produce sufficient heat capable of igniting inflammable gases or vapours permitted to b~.carried out.on the outer su.~aceof such ". oil-tank or vessel, unless . a "aked light certifi­ cate. has previously been obtained on the same day a,nd,isirrforcein respect of that oil'tank; (cc) to be applied to 'the outer surface, l>f, .or to be in, any compartment or space adjacent to an oilctank on board or in a vessel in which oil-tank the oil last carried was such oil as aforesaid, nor any' hot 'work permitted to" be .carried out in, s.uch compartment or space as aforesaid, nor any work.of' such nature whiCh is likely to produce .. sufficient heat capable of •.. igniting inflammable gases Dr vapourspermitted to be carried out on the outer surface of such compartment or space,' unless a-. naked light certificate has previously. been obtained on the same day and is )n force in ,'respect of that compartment or space: . ,Provided that where in any such case re­ f~rred to in. paragraphs (aa), (bb) or (cc) of this sub~clause a competent analyst has certi­ fied that daily naked light certifiCates are un- ,necessa-ry, or a-J;'e necessary only. to a- specified extent, such a daily certificate' need .not ,be obtained or, as the case may be, need only be obtained to the specified extent; . .' ' . . (iii) ,shall be permitted to be applied t;Q the oute,:.surface of, or to be in, anyoil-.tank on board or in a vessel nor any hot work permitted tq 'be carried out in any s!lcIL,oil-tankor vessel, n.or any work of such nature' which is likely to produce sufficiEint heat capabl" pf igniting inflam­ mable gases. or vapours, perrnitteqto' 1:>e carried out on the outer surface of the. oil-tank or vessel, unless, since oil wasJast carried in that· oil-tank, anaked'light certificate has ,been obtained and is in force in respect of that oil-tank; {iv)shall be permitted t~.beapplied to we outer surface of, or to be in, any compartment or . space adjacent to an' oil-tank on board or in a ve~s~l nor any hot workperIl1~,~ted to be ca,rried ou~ m anysuchcompartmenti)lr. space, nor any wor~ ofsueh nature which is likely to produce sufficient heat capable of igniting inflammable gases or'vapoUI:s, per:iuitted to .Ile'carried out on the outer sUrface of any, such' compartment or space, unless~"since oil was la-st carried as cargo in that oil-tank, a naked light certificate has been obtained and is in force in' respect of that com­ partment or. space, (b) Notwithstanding. anything in clause (a) of this sub:rule, heated rivets may be.permitted in any place without naked light certificate being in ·force m respect of that place if expressly' so authorised by a 'competent analyst who certifies that after ade­ quate and. suitable testing, he is satisfied having. regard to all the circumstances of' the ,case, including 116 the likelihood or otherwise of the atmosphere becoming inflammable, that the place is sufficiently free from inflammable vapour; but such heated rivets shall, where practicable, be passed ,through tubes. (c) No person shall introduce, have or apply naked light, fire or lamp (other than safety lamp of a type approved for the purpose of this sub-rule) into, in or to any place where they are prohibited by this sub~rule. (d) No person shall carry out hot work or any work of such nature which is likely to produce sufficierit heat capable of igniting inflammable gases or vapours, in any place or any surface where they are prohibited by this sub-rule. (e) In this sub-rule the expression 'competent analyst' means an analyst who is competent to give a naked light certificate. (41) Entering oil-tanks. - (a) No person (other than an analyst entering with a view to issuing a certificate of entry) shall, unless he is wearing a breathing apparatus of a type approved for the pur­ pose of this' sub-rule, enter or remain in an oil-tank on board or in a vessel unless, since the oil-tank last contained oil, a certificate of entry has been obtained and is in force in respect of the tank. (b) Without prejudice to clause (a) of tItis sub­ -rule, no person (other than an analyst entering as aforesaid) shall be allowed or required to enter or remain in an oil-tank on board or in' a vessel in .which oil-tank the oil last carried was oil having a flash point of less than 23 degrees centigrade unless. since the oil-tank last contained oil, an analyst has certi­ fied that the atmosphere is sufficiently free from flammable mixture. (c) The provisions of this sub-rule are without prejudice to the requirements of sub-rule (34). (42) Duration of oertificates. - Any naked light certificate or certificate of entry may be issued sub­ ject to a condition that it shall not remain in force after a time specified in the certificate; (43) Posting of certi!icates.-Everyoccupier for whom a naked light certificate' or a certificate of entry is obtained shall ensure that the certificate or a duplicate thereof is posted as soon as mD-y be D-nd remains posted in a position where it may be conve- niently read by all persons concerned. ' (44) Maintaining safe atmosphere. - (a) When conditions in an oil-tank in respect of which a naked light certificate has beim'issued, are such that there is a possibility of oil vapour being released from residues or other sources, test shall be carried out by a c~mpetent analyst at such intervals as may. be reqUIred so as to ensure that the conditions in the tank are .maintained safe. (b) Whenever hot work is carried on ora naked light, fire or lamp is allowed to be, on, the weather dec~' ?ver spaces, in. respect of which a naked light certifIcate ha.s not been issued, all covers of man­ holes an~ openings on deck and all valves (except thos:, WhICh are connected to high vept pipesl con­ nectIng the weather 'deck with the said spaces shall 'be closed. " ." ' SERIES I No. ~ (e) A record of all the tests carried out for the purpose of sub-rules (34), (40) and (41) shall be maintained in a register which should furnish the date, time, location and results of the tests. (45) Cleaning a/oil-tanks. - (a) Subject to the provisions of sub-rule (48), before a test for inflam­ mable vapour is carried out with ~ view to the .issue of a naked light certificate for the purposes of sub­ -rule (40) in respect of an oil-tank on board or in a vessel, that: oil-tank shall, since oil wa's last intro­ duced into .the tank, be cleaned and ventilated in accordance with clause (b) of this sub-rule. (b) The said cleaning and ventilation shall be carried out by the following methods:- (i) the oil-tank shall be treated in such manner and for such period as will ensure. the vaporisation of all volatile oil; (ii) all residual oil and any sludge or other de­ posit in the oil-tank shall be removed therefrom; , and . (iii) after the oil-tank has been so cleaned- (aa) all covers of manholes and other opep-­ ings therein shall be removed and it shall be thoroughly ventilated by mechanical or other efficient means with a view to remove all oiL vapour; and then (bb) the interior surfaces, if any deposit reO. mains thereon, shall be washed or scraped down. (46) Invalidation of oertificates. - (a) If during­ the course of work in, or to the outer surface of, any part of a tanker or aircraft carrier, any pipe or tank joL'lt is opened or broken or any other event occurs­ so that there is a risk of oil vapour entering or aris­ ing in that part of the tanker or aircraft carrier, that work shall· be suspended and thereafter any certifi­ cate of entry previously issued in respect of any oil­ -tank in that part and any naked light certificate' previously issued in respect of that part shall be no- longer in force; - (b) If (in the case of a vessel other than a tanker or aircraft carrier) during the course of work in any oil-tank orin any compartment. or space adja­ cent thereto, any pipe or tank joint is opened or­ broken or any other event occurs so that there is a risk ·of oil vapour entering or arising in the oil.tank or in any compartment or space adjacent. thereto that, work shall be suspended. and thereafter any certificate of entry· previously issued in respect of' the oil tank and any naked light certificate pre­ viously issued in respect of the oil~tank or any com­ partment or space adjacent thereto shall he no longer in force. ' (47) ProviSions '(f~ to work in other Compartments' or space8. - (a) without prejudice to the other pro­ visions of this rule, if the presence of oil in such quantity and in such position as to be likely to give rise to fir~ or explosion is detected in, any part of a vessel, jJemg a part to which this sub-rule applies, and in which repairs of the following,kind are'to be or are being Undertaken, that is to say, repairs in­ volving the use of a naked light, fire or lamp [other than a safety lamp of a type 'approved 'for the pur" pose. of sub-rule (40)], or involving hot work, such. repaIrs shall not be started orcoritinued until a, 3RD MAY, 1985 (V AZSAKA 13, 1907) naked light certificate has been issued Qr,. as the case may be, reissued in respect of that part of the vessel. ' (b) This sub-rule shall apply to bilges, shaft tunnels, pump rooms, lamp rooms and to compart­ ments and spaces other than those to which clause (a) (iv) of sub-rul", (40) applies. (48) ExemptionB. - If the Chief Inspector is satisfied, by reasons of the nature of the work and the circumstances in which it ,is carried out, that any proVisions of sub-rules (33) to (45) or part the­ reof can be suspended or relaxed without danger to the health or safety of any person, he may grant suspension or relaxation in writing specifying such' conditions as he may consider fit .. Any such suspen­ sion or relaxation may be revoked at any time. PRECAUTIONS IN USE OF ELECTRICAL ENERGY (49) Earthing. - Electrical. energy other than that generated by an independent generating unit on board shall·not be taken for use, or used in, or in connection with any of the operations unless the body of the ship is securely earthed in such a manner as to ensure an immediate and safe discharge' of . energy to the earth. A ship or vessel shall not be co~sidered as securely earthed for the purpose of this sub-rule only on account of it being partly sub­ merged in water. (50) Arc welding. - (a) Electric arc welding shall not be carried on in connection with any of the operations unless separate and fully insulated weld­ ing return conductor or conductors as the case may be,of adequate electrical capacity are provided for return of the current to the transformer or generator of the welding set. (b) 'The return end of the source of the welding current shall not be earthed.' . (c) All work on which welding is carried on shall be securely earthed independently to an earth elec­ trode i;>y means of conductor or conductors as the case may be, of adequate capacity, unless all such work are connected to any structure of the ship or vessel in such a manner as to ensure adequate con- nection to earth as aforesaid. . (51) Cutting o.j energy in certain cases. - Elec­ trical energy shall be cut off from all portable electric tools and manual electrode holders within any tank, compartment or space referred to in sub-rules (34) and (40) or in any other confined' space during all times when such tools or holders are not in operation: Provided that for determining whether any such portable electric tool or electrode holder is not in operation, no account shall be taken of brief inter­ ruptions of work occurring during normal working: Provided further that energy may not be cnt off fom any such equipment if a responsible person is left in charge of it in such tank, compartment or space concerued: Provided further that cutting of all electrical energy by operation of any switch or control prO­ vided on the portable tool or electrodes holder itself 117 should not be taken as fulfilling the· requirement of this sub-rule. MISCELLANEOUS SAFETY PROVISIONS (52) Lighting •. - All Pll.ris of.a vessel and all other places where the operations are being carried Qn, and all approaches to such parts and to places to which a worker may be required to proceed in the course of his employment, shall be sufficiently and suitably lighted. In providing such lighting, due regard shall be given to avoidance of glare and formation ·of shadows, to the safety of the vessel and cargo, of the navigation. of other vessels, and to any local statutory requirements as to the light-· ing of the harbour or dock. (53) Work in boilers, etc.-(a). No work shall ·be permitted in any boiler, boiler-furnace or boiler­ flue until it has been sufficiently cooled to make work conditions safe for the workers. (b) Before any worker enters any'steam boiler which consists of a range of two or· more steam boilers- . ' (i) all iulets through which steam or hot water might otherwise enter the' boiler from any other part of the range shall be disconn.ected from that part; or . (ii) all valves or taps controlling such entry shall be closed and securely locked. , (c) While workers remain .in any steam boiler to which clause (b) of this suJ?,rule applies, aU such iulets as are referred to. in that clause shall remain disconnected or all such valves or. taps as are therein referred to shall remain closed and securely locked.' . (d) . No. worker shall be allowed or required to. . enter or remain in, and no person shall enter or remain, in any steam boiler to. which clause (b). of this sub-rule applies unless the provisions of that clause are being complied with. (54), Hatch beams. - The hatch beams of any hatch m use for the operations shall, if not removed, be adequately secured to. prevent their displacement. (55) Jumped-up' bolts. - Bolts which have been jumped-up and re-screwed shall not be used for securing plates on the sides of vessels, and no worker shall use such belts for this purpose. . (56) Wo.rk in or on life boats. - (a) Before wOr­ kers ~:e permitted to. work in or.on any life boat, eIther stowed or m susP\'llded position pre­ cau~ions shall be taken to prevent. the boat' from fallmg due to. accidental tripping .of the releasing gear or m.ovement of the devits;and capsizing of the boat if in checks. . . (~) Workers ;;hall not be permitted to remain ~n life boats whIle the life boats are being ho.isted mto final stowed position. PROTECTNE WEAR (57) Hand protection. ~ Adequate protectioll for the hands. shall be available for all workers when using c~tting or welding apparatus to which oxygen or any Inflammable gas or vapow- is supplied at a pressure ~aterJhan at~osphericpressure or, when engaged m machme caulkmg or machine riveting or 118 in transporting or stacking plates or in handling plates at machines. (58) Protection in, connection with cutting or' welding. - (a) Suitable goggles fitted with tinted eye-pieces shall be provided and maintained for all persons employed when using cutting or welding apparatus to which oxygen or any flammable gas or vapour is supplied at a pressure above atmos­ pheric pressure. (b) There shall be provided and maintained for the use of all persons 'employed when engaged in the process of electric welding- (i) suitable helmets or suitable head-shields or suitable hand shields to protect the eyes and face from hot metal and from ,rays likely tobeinju­ rious; and (ii) suitable gauntlets to protect the hands and fore-arms from hot metal and from rays likely to be injurious. (c) When electric welding is in progress at any place and persons other than those engaged in that process are employed in a position where the rays are likely to be injurious to their eyes, screens, shall, where practicable, be provided at that place for the protection of those persons. Where it is not practic­ able to provide effective protection of these persons by screening, suitable goggles shall be provided for their use. (59) Eye protection tor other processes. - Sui­ table goggles or'effective screens shall be provided to protect the eyes of all workers in any of the following processes: (a) the cutting out or cutting off of cold rivets or bolts from boilers or other plant or from ships; (b) the Chipping, scaling or seurfing of boiler or ships' plates; (c) driHing by means of portable machine tools; and (d) dry grinding of metals. (60) Head protection. - When workers are em­ l?!oyed in areas where there is danger of falling ob­ Jects they shall be, provided with suitable safety helmets. (6l) Safety belts and life lines. - (a) Whenever any worker is engaged on work at a place from which he is liable to faIl more than 2 metres he ,,?all be l?rovided with safety belts equipped with' life hnes ~hlCh are secured with, a minimum of slack, to a fIxed structure unless any other effective means such as provisions of gUard rails or ropes are taken to prevent his falling'. ,<b) All safety belts and life lines shall be exa­ mmed at frequent intervals by a competent person to ensure that no belt or life Hne which is not' in 'good condition is used. HEALTH AND WELFARE . (62)P'rohibition 9femployment oj young persons tn certaon. processes. - No young person shall be employed m~ (a) the application of asbestos by means ~fa spray; ' .. SERIES'I No. I) (b) the breaking down for removal of asbestos lagging; (c) the cleaning of sacks or other containers which have contained asbestos; (Ci)the cutting of material containing asbestos by means of portable power driven saws; or (e) the scaling, scurfing or cleaning of boilers, combustion chambers or' smoke boxes, where his work exposes him to dust of such a character and to such an extent as to be likely to be injuC rious or offensive to persons employed in such work. (63) Lead processes. - (a) Lead paint shall not be applied in the form of a spray in the interior ' painting of any part of a ship or vessel. (b) Wherever lead sheathing work is carried on for making cold storage chambers in the ships, effi­ cient exhaust draughts' with portable extractors should be provided to remove the lead fumes from the confined spaces. (64) Stretchers, ambulances and ambulance rooms, etc. ~ (a) In every shipyard there shall be , provided and kept readily available "- (i) a sufficient number of suitably constructed sling stretchers or other similar appliances for raising injured persons; (ii) a sufficient' number of ca.rrying or wheel stretchers; and (iii) a sufficient supply of suitable reviving apparatus and oxygen, and the stretchers, appli­ ances and apparatus so provided shall, be properly maintained. (b) In every Shipyard there shall always be readily available during working hours a responsible person or responsible persons whose duty' it is to summon an ambulance or other means of transport if needed in cases of accident or illness. Legible copies of a notice indicating that person' or, as the case may be, those persons shall be affixed in prominent positions in every shipyard. (c) In every shipyard other .than a dry dock avai­ lable for hire- (i) in which the number of per~ons employed normally exceeds five hundred; or (ii) in which the nuinber of persons employed normally exceeds one hundred and which is more than ten miles from a hospital; there shall be provided and maintained in good order and in clean condition a properly constructed ambulance, room containing at least the equipment prescribed in' the rules framed under section 45 of the Act. 'The room shall be used only for the purpose of treatment and rest and shan be in the charge of a suitably qualified person who shall always be rea­ dily available during working hours, and record shall be kept. of all cases of accident or s.ickness treated in,the room. TRAINING AND SUPERVISION , (65) Young' persons; - (a) No' young person shall, unless he haS been ,employed ina shipyard or 'Shipyards for at least six months, be employed in . '''', J7 .. 'fi- 3RD MAY, 1985 (VAISAKA 13,1907) conn~ction with the operations in a shipyard on a stage from which, or in any part of a ship where, he is liable to fall a distance of more than 2 metres or, into water in which. there is a risk of drowning. (b) Any young person under th~ ag~ of ~ixteen shall, when employed in the operatIons m shiJ;>yard, be placed under the charge of an experienced workman. (66) Safety supervision. - In the. case of ev~ry shipyard other than a dry dock available for hIre, being a shipyard where the number of workers re­ gularly or from tinJe to tinJe exceeds five hundred, a person experienced in the work of .such yards sh:,ll be appointed and employed exclusIvely to exerCIse aeneral supervision of the observance of these rules ~nd to promote the safe conduct of the work generally. 84. Safety measures in factories where eq~pment or pipelines coniaining inflanllnable materials are operated •. - Where work of· opening any equipment of pipeline containing inflammable liquids o.r gases is to be carried out in any factory, the followmg pro­ visions shall be complied with, namely: - I; The system of work perrriits shall, be intro­ duced and unless the equipment or the pipeline is certified to be free of. inflammable gas or liquid, no person shall be allowed to enter or open the saine. II. The work of opening such equipment or pipe­ line shall not be commenced unless the following . operations' are carried out and checked. by the Supervisor in-charge of the Process Department of the Factory: - (i) Blanking opl;1'ations. - The equipment or pipeline to be opened for repairs or mainte­ nance shall be effectively blanked so as to en­ sure that no inflammable gas or liquid can enter the same under any circumstances during the operation of repairs or maintenance. The Super­ visor of the Process Department shall check per­ sonally these operations and shaH certify accordingly. (ii) Flushing operations. - The Supervisor of the Process Department shall carry out the steaming or flushing out with water of the equipment or pipeline to ensure that all inflam­ mable material is removed from the equipment or pipeline and shall certify to that effect. III. (i) Opening of the eqwipment. - The Su-· ,pervisor of the Engineering Department of' the factory in-charge of the work of opening of sueh equipment of pipeline or getting clearance from the Supervisor incharge of the' Process Depart­ ment, shall satisfy himself that the above opera­ tions are complete and shall sign the work permits issued, by the Supervisor of the Pro,cess Depart­ ment. (ii) It shall be the joint responsibility of the Supervisor of the Process Department and the Supervisor of, the Engineering Department to, check and ensure that hot lines, if any, in the vicinity of such' works are properly screened, in accordance with the safety instructions of' the factory management. The work permit shall have 119 as specific entry for this operation which shall be signed by both the Supervisors. , JV. No part of the running equip~ent or pipe­ line shall be opened unless a gas ,test IS conduct~d by a responsible person to ensure that the eqUIp­ ment or pipeline is safe for opening. V. No workers whose clothes have been conta­ minated with inflammable' material shall be allowed to work where any such running equipment or pipeline is being opened.' . VI. The Safety Officer or any officer authorised by hinJ, shall have system of random checking on the work permits issued and he shall report any serious deficiencies to the Works Manager' di­ rectly. VII .. All drains of such equipments or pipeline shall be laid into the drains to prevent any splash­ ing of the training inflammable liquids or gases. VII1. Before commenCing the opening operation, it shall be ensured that specific person trained in fire-fighting operations, is kept available and his presence shall be ensured throughout the opera­ tionpf the opening of equipment.' 85, Safely measUl'eS in· gas works. - In respect of any factory where inflammable gas is produced by carbonization of coal, oil or any other sinJilat substance, the following provisions shall be complied with, namely- (i)' No pipe, valve or any cover of any equip­ ment into which gas is normally allowed to flow shall be opened unless it is ensured that the equip-. ment is no more supplied with any inflammable or explosive gas at a pressure greater than atlnospheric pressure. (ii) . Before undertaking repairs' of every sort to any pipe, valve or any other equipment con­ nected with any part in the plant or machinery or any gas works (not. being' a gas-holder) it shall be ensured that the gas under pressure does not 'reach the point where such pipe, valve or equipment is being opened by the removal of any bolts <,-nd nuts or by cutting either by.mechanical means or by application of heat and that such pipe, valve or equipment is so isolated from the gas-holder or any other equipment generating gas that no gas under the pressure reaches the , point of repair. ,. (iii) Before loosening the bolts and nuts or before undertaking the cutting of any pipe, valve or equipment in any gas works; a definite test shall be carried out by a competent person that no gas under pressure is fed' to the point of repair. Details of the test carried out shall be mentioned in a certificate which shall be signed by the competent person. A coPy of such certi­ ficate shall be displayed. prominently near the place of repair and shall be made available on demand to every worker employed in connection with such repairs for his perusal. (iv) 'Every worker employed in connection with such repairs and.working near any pipe, valve or other equipment while it is. being opened shall be supplied with a mask and, a respirator fed by air fresh from a point away from the point of . repair. It shall be ensured that the worker shall -~--- .... -.. ,_. 120 wear the respirator while working near the point of repair. (v) Electrical wiring or any electrical equip­ ment (not being electrical arc welding equipme!lt) used near the point of repair shall be so arranged that there are no trailing cables along the floor. All electrical equipment shall be of flame-proof type: . Provided that the provisions of this rule shall not apply to mains and services, plant or machinery installed in the open air subject to the following conditions: - (a) The main or service shall be situated in the 'open air, and it shall contain only the follow­ ing gases, separately or mixed at a pressure greater'than atmospheric pressure, namely, town g(l.S, coke-oven gas, producer gas, blast fUrnace gas or gases other than air, used in their manu­ facture; (b) The main or service shall not contain ace­ tylene or any gas or mixture of gases to which acetylene has. been added intentionally; (c) The operation shall be carried out by an experienced person or persons and at least two persons (including those carrying out the ope­ rations) experienced in work on gas mains and over 18 years of age shall be present during the operation; (d) The site of the operation shall be free from any ·inflammable or explosive gas or vapour; (e) Where acetylene gas is used as a source of heat in connection with an operation, it shall be compressed and contained in a porous substance in a cylinder; and (f) Prior to' the application of any flame to the gas main or service, this shall be pierced or drilled and the escaping gas ignited. Explanation: (1) It shall not be considered an effective measure to stop the gas under pressure from reaching the point of repair if only an inflated bladder is used as the obstruction between the source of gas under pressure and the point of repair: Provided that where gas valves' cannot be pro­ vided, it shall be considered an effective measure to stop the gas pressure from reaching the point of repairs if inflated bags alone are inserted against gas pressures not in excess of those indicated below:- Diameter (in) of gas main Upto and including 4 5 to 10 11 to 17 18 to 24 Over 24 ... Pressure in inches of water gauge 10 8 6 5 3 and a competent person is kept constantly during the operation to watch and control the pressures within the limits specified as above and that Such bags must be tested on site for soundness and at least two spare bags are made available on site. SERIES I No. 5 (2) The competent person for the purpose of this rule shall be the Chief Engineer of the factory or a persoll certified by the Chief Engineer in writing to be the competent person: 86. Fragile Roofs - Provision of Crawling Boards, etc. - In any factory, no person shall be required to stand or pass over or work on or near any roof or ceiling covered with fragile material like A. C. Sheets or similar material through which he is liable to fall, in case'it breaks or gives way to a distance of more than three metres unless- (a) suitable and snfficient ladders, duck ladders or clawling boards, which shall be securely supported, are provided and used; and (b) a permit to work on the fragile roof is issued to him each time he is required to work thereon by a responsible. person of the factory concerned. Explanation: Fragile material means sheets made of asbestos cement or made from similar materials such a perspex, polyester or other types of plastic fibres. 87. SpeCial Safety Precautions for certain highly hazardous chemIcal process. - In respect of any factory engaged in carrying out any hazardous chemical processes or such parts of any 'processes as are specified in the Schedule annexed hereto the following provisions shall be complied with viz.:- (1) Process Hazards. - Before commencing any large scale experimental works or any new manufacture, all possible steps shall be taken to " ascertain definitely all the hazards involved both from the actual operations and also from the point of view of the chemical reactions. The pro­ perties of the. raw materials used, the final pro­ ducts to be made and any byproducts arising during mannfacture shall be carefully studied and adequate and suitable provisions shall' be made in advance for dealing with any hazards including effects on workers which may' be inherent in the process or which may arise during the proc'ess of mannfacture. (b) The plant, machinery or equipment con­ cerned with the hazardous process shall be in­ -charge of such operators only who have been trained and made thoroughly conversant to be fit persons to be. in-charge thereOf and no other persons shall be allowed to, operate the plant, machinery or equipment. The operators shall be regnlar employees of the occupier and shall in no case be persons who are employed as contract workers. ' (c) The work of. the operators Shall be' super­ vised on an overall basis by at least one competent person, who for the purpose of this sub-rule shall at least be a graduate in Chemical Engineering or Chemical Technology with specialised know­ ledge. in respect of the processes given in the schedule: Provided. that the Chief Inspector of Factories may accept a graduate in chemistry having' ade­ quate knowledge of the process given in the Schedule and also adequate experience and train­ ing or any other qualifications, if in his opinion they are equivalent to the qualifications aforesaid. 3RD MAY, 1985 (V AISAKA 13, 1907) (2) Emergency instructions. - Simple and special instructions shall be framed to ensure that effective measures will be carried out in cases of emergency, to deal with possible escapes of inflammable explo­ sive, toxic or deleterious gases, vapours, liquids or dusts. These instructions shall be in the language understood by the majority of the workers and shall be displayed· in . bold letters at prominent places in the . different sections concerned. All concerned workers shall be suitably trained and fully instructed in the prompt action to be taken in such emergencies and also in the general hazards encountered in this process. (3) Fire and explosion risks. - In any part of the factory where there is a danger due to fire or explo­ simi from inflammable gas, vapour or dust - (i) No internal combustion engine and no electric motor or other electrical equipment or instrument capable of generating sparks.or other wi£!e causing combustion shall be installed or ~sed in a building engaged in the processes. All electri­ cal fitting shall be of suitable flame-proof cons­ truction. .. (ii) All pipes carrying hot exhaust or chemicals shall be installed outside the plant building and where this is not possible, these pipes including the flanged portion shall be effectively lagged. (iii) Where an inflammable atmosphere is likely to occur the soles of footwear worn by workers shall have no metal on them and the wheels of trucks or conveyors shall be construc­ ted of non-sparking materials. Adequate precau­ tions shall be taken to prevent the ignition of explOSive or inflammable atmosphere by sparks emitted from locomotives or other vehicles o~ rating in the vicinity. (iv) Portable electric hand lamps shall not be used unless of an intrinsically safe type and all por­ table electric tools and appliances connected by fle­ xible wires shall not be used, unless these are of suitable flame-proof construction .. (v) No electric arc lamp or naked light fixed or portable, shall be used an no person shall have in his possession any match or any apparatus of any type for producing a naked light or spark and all incandescent electric lights shall be in double airtight covers. (vi) Prominent notices in. the languages under- . stood by the mojority of the workers and legible by day and by night, prohibiting smoking the use of naked lights and the carrying of matches or any apparatus for producing a naked light or spark shall be affixed at the entrance of every room or place where there is the risk of fire or explosion from inflammable liquid gas, vapour or dust. In the case of illiterate workers. the con­ tents of the notices shall be fully and· carefully explained to ·them. when they commence work in the factory.for the first time and again when they have completed one week of service. (vii) A sufficient supply of spades, scrapers and pails made from suitable non-sparking mate­ rial shall be provided for the use of persons employed in cleaning out and or removing residue: from any chamber, still, tank or other vessels of material of any inflammable or explosive nature. 121 (viii) All machinery and plant, particularly pipe lines, belt-drives stirer on which static electricity is likely to accumulate shall be effectively earthed. . Receptables for inflammable liquids shall have metallic connections to earthened· supply tanks to prevent sparking due to static charge build up. (4) Additional special precautions. - (i) The heating of . the process, if required, shall not be carried out by immersion or other types of heaters deriving energy from electricity. (ii) The steam heating coils placed in· the lower . part of the vessel shall never be kept uncovered or allowed to. be heated dry. A substantial amount of the liquid shall be ensured in the vessel after each operation to prevent them from being dry: Provided that in case of using vessels filled with high melting products, the steam shall be stoppeu; disconnected to the heating coils, before dra.ming pro­ cess is started to ensure that the heating coils are free of steam before they are uncovered. (iii) Steam shall be supplied th~ough a pressure reducing valve and safety valve correctly set to ensure that the critica.l temperature of the process is not exceeded. . (iv) A suitable rupture disc shall be provided on 'the vessel in addition to the usual spring-loaded safety valve. The pipe duct leading away from the rupture disc shall be taken out· of the workroom. It shall be straight and without any bends in order to minimise resistance at the time of blowing and to avoid any chance of a secondary· vapour/air explosion. . (v) The vent line of the vessel shall carry a flame­ arrestor. (vi) Breaking of vacuum, if the process is done under vacuum, on account of consideration of special hazards iriherent in the process, shall be done only with nitrogen, other suitable inert gas or steam. Compressed air connection to the manifolds of the vessel equipment shall be avoided. (vii) There shall be an automatic cut-off device of steam· supply or other heating devices as well as of further feed to· the vessel set to operate, no sooner the critical temperature is reached, beyond which the reaction, if any, in the vessels is likely to get out of control or reach run-a way stage. (viii) There shall be arrangement of such a nature that it w0.nld be possible to introduce quickly, pre­ ferably· chlIIed water or at least ordinary cool water CIrculation in the steam or other heating coils, no ' sooner the heating element is cut.o()ff or separate coils or jackets for this purpose· shall be provided for the vessel. . (ix) An alarm systemshaII be provided linked to the pressure indicator of the vessel, so that auto­ maticaIIy an audible warning will ·be given as soon as the pressure exceeds the present safe limit; (x) There shall be provided an automatic arrange­ n.'-ent of such a nat:u-e that if the mechancal agita­ tIon, where so prOVIded, fails on account of failure of motive pOWers or due to broken shaft broken .blades, falling off of blades or such othe; contin­ gencies, the supply of steam or other heatin~ devices as weII as further feed of material would stop auto­ maticaIIy. SERIES I No. 5 122 =----- -----.-------------- ------- (5) Exemptions. - If the Chief Inspector of Facto­ ries is satisfied in respect of any factory or any proc.ess . that owiilg to the special conditions or spe­ cial methods of work.adopted or by. reason of the infrequency of the process or for other reasons, all or any of the requirement of this rule are not neces­ sary for the protection of persons emplo~ed in. ~y factory or any process, he may by order III wrIting (which he may jri his. discretion revoke at any time) exempt such .factory or such process from all or any of the provisions of this rule, subject to such condi­ tion as he may by such order prescribe and he may, in his discretion .add, substract or modify such con­ ditions as deemed fit by him at any time. (1) SCHEDULE Nitro or Amino processes means the manu­ facture of nItro or amino derivative of Phenol Toluene and of· Benzene or its Comologus and the making of explosives with the aid of any of these substances. (2) Haiogenation process means the addition or substitution reaction with a wide variety of: - (a) (b) Chlorination agents and system~ such as Chlorine gas, Hydrochloric Acid, S0diulU! !Hypo~hloride, Phosgene, Thionyl Chloride (Socl,)Sulphonyl Chloride, (So,/cl.,) Phos­ phorous and such others. Fluorination agents such as Fluorine. (c) Bromination agents such as a Bromine. (d) Iodination agents such as. Iodine, in liquid or gas phases. (3) Aromatization and Isomerization process. 88. Reaction vessels and lrettles. ~ (1) This rule applies to reaction vessels and kettles, hereinafter referred to as reaction vessels, which normally work at lL pressure not above the atmospheric pressure but in which there is likelihood of pressure being created above the atmospheric pressure due to reac­ tion getting out of control or any other circums­ tances. (2) In the event of the vessel being heated by electrical means, a suitable thermostatic control device shall be provided to prevent the temperature exceeding the safe limit. (3) Where steam is .used for heating purposes in a reaction vessel, it shall be supplied through a sui­ table pressure reducing valve or any other suitable automatic device to prevent the maximum per­ missible steam pressure being exceeded, unless the pressure of the steam in the supply line itself cal1not exceed the Said ·maximum permissible pressure. (4) A suitable. safety valve or rupture disc of ade­ quate size and capacity shall be provided to l'ffecti­ vely prevent the pressure being built up in the reaction vessel beyond the safe limit. Effective arrangements shall be made to ensure that the released gases, fumes, vapours, liquids or dusts, as the case may be, are led away and disposed off through suitable pipes. without causing any hazard. Where inflammable. gases or vapours are likely to be vented out from the vessel, the discharge end shall be provided with a flame arrestor. (5) Every reaction vessel shall be provided with a pressure gauge having the appropriate range. (6) In addition to the devices as mentioned in the foregoing provisions, means shall be proviqed for automatically stopping the feed into the vessel as soon as precess conditions deviate from the norm~Ll limits t6 an extent which can be cOllsidered as dan­ gerous. (7) Wherever necessary, an effective system for cooling, flooding or blanketing shall be provided, fer the purpose of controlling the reaction and process conditions within the safe limits of temperature and pressure. (8) An automatic auditory and vismLl warnirig device shall be provided for clear,warning whenever process conditions exceed the. present limits.· This device, wherever possible; shall be integrated wit):l. automatic process correction system. . . (9) A notice pointing out the possible circums­ tances in which. pressures above: atn;lOspheric : pres­ sure may be built up in the reaction vessel, the dangers involved .and the precautions to be taken . by the operators shall be displayed at a conspicuous place near the vessel. 89. Examination of eye sight of certain wo:rirers,­ (1) No. person shall be employed to operate a crane, locomotive or fork-lift truck, or to· give signals to a crane or locomotive operator unless his. eye sight" and colour vision has been examined and declared fit by a qualified opthalmologist to work whether with.or without the use of corrective glasses .. (2) The eye sight ·and colour vision of the person employed as referred to in sub-rule (1) shall be e:m­ mined at least once in every 12 mohths up to the age of 45 years and .once in every 6 months beyond that age. (3) Any fee payable for an· examination of a person under this sub-rule shall be pru.d by the occu­ pier and shall not be recoverable from that person. (4) The record of examination or' re~exaIrjnation carried .out as required under sub-rule (1) shall be maintained in Form 41. . ~o. Safety Committoo. - (1) In every fact.ory· in WhICh 250 or more ':I'orkers are ordinarily employed, there shall be established a safety committee .for the pUrpose of reviewing the measures taken to ensure the health and safety of workers and to undertake such co-ordinative functions as under the direction of the management are assigned to it for promotinO" health and safety of the workers.· b (2) The safety committee shall consist of equal number of representatives of the management and the e~ployees, and the minimum number of repre­ sentatives shall be six. . (3) The representatives of the management shall m~lude the manager of the factory, and the com­ nnttee shall be headed by a senior .official nominated ?y the occuJ;ie,;:. Who by his 'pOSition and authority III the organIsa.lOn can contribute effectively to the functions of the committee. (4) The safety committee shall meet as .often as necessary but at least once a month. , (5) Where due to the size of the fact.ory, or any other reas.on, the functi.ons referred to . in sub-rule (1) cannot be effectively carried out by .one safety • 3RD MAY, 1985 (VAISAKA 13,1907) committee the occupier shall establish further sub­ -committees as may be required, a1id they shall func­ tion under the control and guidance of the aforesaid safety committee. (6) The provisions of. ~b~rules (2) and (~) shall apply to the sub-cOtnmlttee~ wherever such com­ mittees are set up. . CHAPTER V WELFARE Rule prescribed under-section '(2) of Section 42: . .91. Washing facilities. c-c- (1) There shall be pro­ vided and maintained in every' factory for the use of employed persons adequate and s]1itable facilities for waShing which shall.include.soapalid nail brushes or other suitable means of cleaning and the facilities shall be conveniently . access,ihleand shall be kept in . clean and orderly conditions, and shall not be located in the vicinity of latrines and urinals. Such facilities shall be conveniently located nr-ar the rest or lunch rooms in factories where such rest­ -rooms or lunch-rooms are required to be provided. The . washing. facilities . shall be so enclosed or screened as to ensure privacy: Provided that where a permanently built wall of f.u!lb.eight is provided separating the washing faci­ litiesfrom the latrines and urinals,it will be treated as satisfactory compliance with the requirement of this sub,rule in regard to location of washing facili- ties. . . (2) .Without prejudice to 'the generality of the foregomg provisions the washing facilities shall include- fa) a trough with taps or jets at intervals of not less than 60 centinretres, or . (b) wash-basins with taps attached thereto, or (c) taps on stand-pipes, or (d) showers controlled by taps, or (e) circular troughs of the fountain type: Provided that the Inspector may, having' regard to the needs and habits of the workers, fix the pro­ portion in which the aforementioned types of faci­ lities shall be installed. (3) (a) Every trough and basin shall have a smooth, inrpervious surface and shall be fitted with a waste-pipe and plug. (b) The floor or ground under and in the imme­ diate vicinity of 'every trough tap, jet, wash-basin, stand-pipe and shower shall be so laid or rmished as to provide a smooth inrpervious s.uriace and shall be adequately drained. (4) For persons Whose work involves contact with any injurious or obnoXious substances, or who are employed in a dusty 'process, there Shall be at least one shower controlled by tap for every 10 persons employed .at a tinre, ·and each of these 'showers shall be enclosed separately in elise of their use by women workers. For personswhose.work does not involve such'contact or who are not employed in dusty pro- 123 cesses, the . number of washing facilities shall be as follows:' '- . .. NUmber of persons employed at a tIme· NUinrn;r of washing . . facilities' Up to 200 ... One for every 20 or part the- reof. Exceeding 200 ... 10+one for. every 50 or part thereof .. (5) If female workers are, employed, separate washing, facilities shall be provided and so. enclosed of screened that the interiors are)lOt visible from any place where persons of the other sex work or pass. The entrance to such fac.ilities shall bear cons­ picuous . notice in the language understood by the majority of the workers .. ".ForWomen Only" arid shall also be indicated pictorially. (6) The water supply to the waShing facilities shall be capable of yielding at least thirty liires a day for each person employed in the factory and shall be from a source approved in writing by the Health Officer: . Provided that where the Chief Inspector is satis­ fied that such~an yield is not practicable, he may by certificate in writing permit the. supply of a smaller quantity not being less then five litres per day for every person employed in the factory. Rule prescribed under Section 43: 92. Facilities for keeping clothing. - All· classes of factories mentioned in the ScJredule annexed' he­ retoShall provide facilities' for keeping clothing not worn during working hours and ·-for the drying of wet clothing. Such facilities shall. include the provi­ sions of separate rooms, pegs, locker or other arran­ gements' approved by the Chief Inspector of Factories. SCHEDULE f Glass works. Engineering workshops. ~~~~~steel works. Chemical works.·' Automobile workshOps. ' Dyeing works. . Rule prescribed under sub-section (I) of Section 45: 93. First-aid appliances.- The firStcaid boxes or cupboards shall be distinctively marked' with a' red cross on white background and shall contain the follOWing equipment:- (A) For factories in which the number of per­ sons employed does not exceed ten, or (in the case of factories in which mechanical power is nO.t used) does not exceed fifty persons, each first­ -ald. box or cupboard shall contain the following· eqmpment: ~ . (i) Six small size sterilised dressings; (ii) Three medium size sterilisea dressings: (iii) Three large size sterilised dressings; (iv) Three large size sterilised burn dressings; 124 (v) One (60 ml.) bottle of catrimide solu­ tion (1%) or a suitable antiseptic solu­ tion. (vi) One (60 ml.) bottle of mercurochrome solution (2%) in water. (vii) One (30 ml.) bottle containing sel-vola­ tile having the dose and mode of ad­ ministration indicated on the label. (viii) One pair of scissors. (ix) One roll of adhesive plaster (2 cm. x 1 m) . (x) Six pieces of sterilised eye pads in ~epa­ rate sealed packets. (xi) A bottle containing 100 tablets (each of 325 mg.) of aspirin or any other anal­ gesic. (Xii) Ointment for burns. . (xiii) Polythene wash bottle (112 litre, Le. 500 c.c.) for washing eyes. (xiv) A snake-bite lancet. (xv) One (30 ml.) bottle containing potassium permanganate· crystals. (xvi) One copy of first-aid leaflet issued by the Directorate General of Factory Advice Service and Labour Institutes, Government of India, Bombay. ' (B) For factories in which mechanical power is used and in which the number of persons em­ ployed exceeds ten but does not exceed fifty, each first-aid box or cupboard shall contain the follow­ ing equipment:- (i) Twelve small size sterilised dressings. (ii) Six medium size sterilised dressings. (iii) . Six large size sterilised dressings. (iv) Six large size sterilised burn dressings. (v) Six (15 gm.) packets of sterilised cotton wool. (vi) One (120 mI.) bottle of cetrimide solu­ tion (1%) or a suitable antiseptic solu­ tion. (vii) One (120 ml.) bottle of mercurochrome solution (2%) in water. (viii) One (60 ml;) bottle containing sal-vola­ tile having the dose and mode of ad­ ministration indicated on the label. (ix). One pair of scissors. (x) Two rolls of adhesive plaster (2 cm. X 1 m). (xi) Eight pieces of sterilised eye pads in separate sealed packets. (xii) One tourniquet. (xiii) One dozen safety pins. (xiv) A bottle containing 100 tablets (each of 325 mg.) of aspirin or any other analgesic: (xv) Ointment for burns. (xvi) One polythene wash bottle (Ve litre i.e., 500 c.c.) for washing eyes. (xvii) A snake-bite lancet. (xviii) One (30 mI.) bottle containing potassium permanganate crystals. SERIES I No.5 (xix) One copy of the first-aid leaflet issued by the Directorate General of Factory Advice Service and Labour Institutes, Government of India, Bombay. (e) For factories employing more than fifty persons, each first-aid box or cupboard shall con­ tainthe following equipment:- (i) Twenty-four small sterilised dressings. (ii) Twelve medium size sterilised dressings. (iii) Twelve large size sterilised dressings. (iv) Twelve large size sterilised bun1 dress- ings. (v) Twelve (15 gm.) packets of sterilised· cotton wool. (vi) One (200 ml.) bottle of cetrimide oolution (1 %) or a .suitable antiseptic solution . (vii) One (200ml.) bottle ofmercurochrome (2%) solution in water. (viii) One (120 mI.) bottle of sal-volatile having the .dose and mode of administration in­ dicated on the label.' (ix) One pair of scissors. (x) One roll of adhesive plaster (6cmX1m)_ (xi) Two rolls of adhesive plaster (2 cm. X 1 m.). (xii) 'Twelve pieces of sterilised eye pads in separate sealed packets. (xiii) A bottle containing 100 tablets (each of 325 mg.) of aspirin or any other analgesic. (xiv) One polythene wash bottle (5oo cc) for washing' eyes. (xv) Twelve roller bandages 10 cm wide. (xvi) Twelve roller bandages 5 cm wide. (xvii) .Six triangular bandages. (xviii) One tourniquet. (xix) A supply of suitable splints. (xx) Two packets of safety pins. (xxi) Kidney tray. (xxii) A snake-bite lancet. (xxiii) Ointment for burns. (xxiv) One (30 ml.) bottle containing potassium permanganate crystals. (xxv) One copy of first-aid leaflet issued by the Directorate General of Factory Advice Service and Labour Institutes, Govern­ ment of Iildia, Bombay. Provided that items (xiv,) to (xxi) inclusive, need not be included in the standard first-aid box: or cupboard . (a) where there is a properly equipped ambu~ lance room, or (b) if at least one box containing such items and placed and maintained in accordance with the requirements of section 45 is separately provided. " (D) In lieu of the dressings required under items (i) and (ii), there may be substituted adhesive wound dressings approved by the Chief Inspector of Factories arid other equipment or 2RD MAY, 198L(VAISAK-'!c}3, 19_0~7) _____________________ ~ __ _ 125 medicines that may be considered essential and recommended by the Chief Inspector from time to time. Rule prescribed under Section 112 read with sub-section (3) of Section 45, 94. Notice regarding first-aid. -A notice .con­ taining the names of the persons working within' the precincts of the factory who are trained in first-aid treatment and who are in charge of the first-aid boxes or cupboards shall be posted in every factory at a conspicuous place and near such box or cupboard. The notice shall also indicate work­ room where the said person shall be available. The name of the nearest· hospital. and its telephone number shall also be mentioned prominently in the said notice. . Rule prescribed under sub-section (4) of Section 45: 95. Ambulance Room. - (1) Every ambulance room shall be under the charge of at least one whole-time. qualified medical practitioner (herein­ after referred to as "the medica!. officer") assisted by at least one qualified nurse or dresser-cum-com­ pounder and one nursing attendant in each shift: -Pl'ovided that where a factory works in more than one shift, the Chief Inspector, if 11e is satisfied that on account of the size of the factory, nature of hazards or frequency of accidents,' it is not neces­ sary to. employ a whole-time medical officer for each shift separately, may, with the previous appro­ val of the Government, grant e"emption from the provisions of this sub-rule and permit employment of only one whole-time medical officer for more than one' or all shifts,' sUbject to the conditions that..;.. . (a) there shall be no relaxation in respect of nursing staff; . . (b) the medical officer is readily available on call durillg the working hours of the factory. (2) . There shall be displayed ill the ambulance room or dispensary a notice giving the name, address and . telephone number of the medical officer in. charge. The name of. the nearest hospital and its telephone number shall also be mentioned promi- nently in the said notice. '. (3) No medical officer shall be required or per­ mitted to do any work which is inconsistent with or detrimental to his responsibilities under this rule. (4) The ambulance room shall be separate from the,rest of the factory and, shall be' used only for the purpose of first~aid' treatment and rest. It shall have a floor area. of at least 24 square metres and smooth, hard and impervious walls and floors, and shall be adequately ventilated and lighted by both natural and artificial means. There shall be attached to it at least one latrine .and urinal of sanitary type. An adequate supply of wholesome drinking water shall be in the ambulance room and the room shall contain at least- 0) A glazed sink with hot and cold water always available. (ii) A table with a smooth top at least 180 em X. 105 cms. (iii) Means for sterilising instruments. (iv) A couch. (v) Two stretchers. (vi) Two buckets or containers with close fitting lids;' (vii) Two rubber hot water bags. (viii) A kettle and spirit stove or other sui­ table means of boiling water. (ix)12 plain wooden splints 900 mm X 100mm X 6mm. ,(x) Twelve plain wooden splints 350 mm X '(5mm X 6mm; (xi) Six plain wooden splints 250 rom X 50mm X ,12 orin" (xii) Six woollen blankets. (xiii) Three pai~ artery forceps. '(xiv) One bottle Of spiritous ammoniac aroniaticus (120 mi.). (xv) Smelling salts (60gm.). (xvi) Two medium size,sponges. (xvii) 'Six hand towels. (xviii), FOur "kidney" trays. (xix) ,Four cakes of toilet, preferably anti­ septic soa:p. (xx) Two glass tumblers and two Wine glasses. (xxi) Two clinical thermometers. (xxii) Two teaspoons." (xxiii) Two graduated (120ml.) measuring , glasses.' ' (xxiv) Two minimum niell,suring glasseS. (xxv) One wash bottle (1000 c.c.) for wash­ ing eyes. (xxvi) One bottle, (one litre) carbolic lQtion 1. in 20 . (xxvii) Three chairs; (xxviii) One screell. (xxix) One electric hand' torch. (xxx) An adequate supply, of anti-tetanus toxoid. ,," (xxXi) Four first-aidh9xeS or cupboard stocked to the standard prescribed under (6) of rule 93. (xXxii) Injections - mOi'phine, pet 'h i din e, atropine, adrenaline,'coraniine, novocan' (6 each).'" (xXxiii) Coramine liquid (60 nil,). (xxxiv) . Tablets - antihistaminic; antispasmo­ dic (25 each). , (xxxv) SyringeS with needles - 2 cc., 10, cc. and 50 ce .. '(xxxvi) Three surgical scissors. . (xxxvii) Two needle holderS/big and small.' .,~xxxviii) Suturing ,:eedlesand materials. (xxxix) Three dissecting forceps:'" (xI) Three dressing forceps. " (xIi) Three scalpels. '126 (xlii) One stethescope. (xliii) One sphygmomanometer (Blood Pres­ sure Instrument). (xlix) Rubber bandage ~ pressure bandage. (xlv) Oxygen c y lin d e r with necessary, , attachments., (4) The occupier of every fiwtory'to w:hich tl;ese , rules apply shall for the ' purpose of remoVIng serIOUS cases of accident or sickness, provide in the premises and maintain in good condition a suitable conveyance unless he has made arrangements for obtaining such a conveyance from a hospital. (5) A record of all cases of ,accident and sickness treated at the room shall be kept and produced to the Inspector or Certifying Surgeon when required. (6) The Chief Inspector may, by an or<;ler in writ­ ing, exempt any factory from the reqnirements of this rule, subject to such conditions as he may spe­ cify in that order, if a hospital,ambulance room or dispensary is maintained at or within 200 metres of the precincts of the factory and such arrange- ' mentsare made as to ensure the immediate treat­ ment of all injuries sustained by workers within the factory and for providing rest to the workers so injured. ' Explanation. For the purpose of this rule, "Quali­ fied Medical Practitioner" means a person holding a qualification granted by an authority specified in the Schedule to the Indian Medical Degrees Act, 1916, or in the Schedules to' the Indian Medical Council Act, ,1956. Rules prescrib,ed under Section 4~:' 96., Canteens. - (1) The occupier of every fac­ torv wherein more than 250 workers are ordinarily employed and which is specified by the Government by a notification in the Official Gazette in this behalf shall provide, in or near the factory, an ade­ quate canteen according to the standards prescribed in the Rules. ' ' (2) The canteen building shall be situated at a distance of not less than 15 metres from any latrine, urinal, ,boiler house, coal stacks, ash dumps and any other source of dust, smoke or obnoxious fumes: Provided that the Chief Inspector may in any pariicular factory re1axthe provisions of .this sub­ -rule to such an extent as may be reasonable in the circumstances and' may require adequate measures to be adopted to secure the essential purpose: of this sub-rule. (3) The canteen building shall be constructed in accordance with the plans approved by the Chief Inspector and shaH accommodate at least a diJ;ling hall, kitchen, ;;tore room, pantry and washing places separately for workers and for utensils. (4) In a canteen the floor and inside walls upto a height of 1.2 metres from the floor shall be made of smooth and impervious material; the remaining portion of the inside walls shall be made smooth by cement plaster orin any other manner approved by the Chief Inspector. (5) The doors and windows of a canteen build­ ing shan be of" flyproof construction and shall allow adequate ventilation. SERIES I No.5 ------- (6) The canteen shall be sufficiently lighted' at all times, when any persons have access to it. (7) (a) In every canteen- (i) all inside walls of rooms and aH ceilings and passages and staircases shall be limewashed or colourwashed at least once in each year or painted once in three years dating from the period when last' limewashed, colourwashed or painted, as the case may be; (ii) all' wood work sha,ll be varnished, or ,painted once in. three years dating from the period when last varnished or painted; , (iii) aH internal structural iron' or steel work shaH be varnished or painted once in three' years dating from the period when last varnished' or painted: ' Provided that inside walls of the kitchen shall be limewashed once every four months. ' (b) Records of dates on which Iimewashing, colourwashing, varnishing or painting is carried out shaH be maintained in the prescribed register (Fonn 8). (8) The precincts of the canteen shall be main­ tained in ,a clean and sanitary condition. Waste water shaH be carried away in suitable covered drains and shaH' not be' allowed to, accumulate so as to cause a nuisance. Suitable arrangements shall be made for the collection anddispositl of garbage. '97. Dining hall. - (1) The dining hall shall' 'accommodate at a time at least 30 per cent of the workers working at a time. Provided that, in any particular factory or in any particular class of factories, the Chief Inspector may, , by an order in writing in this behalf,' alter the per­ centage of workers to be so accommodated. (2) The floor area of the dining hall, excluding 'tbe area occupied by the service counter and, any furniture except tables a~d chairs, shall be not less than 1 square metre per diner to be accommodated as prescribed in sub-rule (1). ' (3) A portion of the dining h8lland service counter shall ,be partitioned off and reserved for women workers in proportion to· their number. Washing ,places for women shall be, separate and 'screened to secure privacy. (4) Sufficient tables, chairs or benches shall be available for the number of diners to be, accommo­ dated as prescribed in sub-rule (1), 98. Equipment. - (1) There shaH be provided and maintained,sufficient utensils, crockery, cutlery, furniture and any other equipment' necessary for the efficient running of the canteen. Suitable clean, clothes for the employees serving the canteen shall. also be provided and maintained. (2) The furniture, utensils and other equipment shall be maintained in a clean and hygienic con­ dition. A service counter, if provided, shall ha.ve a top of smooth arid impervious material: Suitable faci­ lities 'including an adequate supply of hot water shall be prQvided for the cleaning of utensils, and equipment. ' fi 3RD MAY, 1985 (VAISAKA ~~ 1907)'--__________ --.:... _________ --"'127 99. Prices to be charged. - (1) The Chief Ins­ pector, may, by an order in writing, ~t the manager to provide in the canteen ~y Ite~ <;>f foodstuff if he is satisfied that such, Item IS In general demand. Such order shall specify the .size of each portion to be -served, the number of portl<;>ns which shall be available and the frequency of servIng the particular item, per week. Such order shall also specify the time limit within which the order shall be complied with. (2) Food drink and other items served in the canteen sh;ll be sold on a non-profit basis anil the prices charged shall be subject to the approval of the Canteen' Managing Committee; :(3) In computing the prices referred ~() in sub­ rule (1) the following items of expenditure shall not be taken into consideration, but will be borne by the occupier:- (a) the rent for the land and building; (b) the depreciation and maintenance 'charges of the building and equipment provided for the canteen; (c) the cost of purchase, repairs and replace­ ment of equipment including furniture,- crockery, , with the provisions of the Co-operative Societies Act. '.' 101. Managing Comruittoo.- (1) The manager shall appoint a Canteen Managing Committee which shall be consulted ,from time to tinle as to- (a) the quality and quantity of food stuffs to be served in the canteen; . (6) the arrangement of the menus; ( c) the time of serving nieals in the. canteen; "and (d)' any other matter pertaining to the caoteen asniayre directed by the' Committee: . ' , Provided that where the canteen is, managed by a Co-operative'Society registered urtder the Co-ope­ rative Societies' Act, it shall 'not be necessary to appoint., a Canteen Managing Committee.: (2) . The canteen Managing Commlttee shall con­ sist: (if an equal number of persons nominated by the· occupier and: those elected by the workers. The number of elected workers shall be in the pro­ portion of 1 for every 1000 workers .employed in the factory, provided that in no 'case shall there' be more than. 5 or less than 2 workers on' the cutlery and utensils; , . Committee. (d) the water charges and expenses ,for pro­ viding lighting and ventilation; (e) the interest on the 'amount spent on the provision and maintenance of the building, furni~ 'ture and equipment provided for the canteen; , (f) the cost of fuel required for cooking or , heating foodstuffs or water; , and (g) the wages of the employees serving in the canteen and the cost of uniforms, if any, provided to them: Provided that where a 'canteen is managed by workers' co-operative society, the, prices to be charged may include a margin' of profit upto a, ma'fimum of 5 per cent of its working capital. (4) The charges per portion of foodstuffs, beverages and any other items serVed in,the canteen shall be conspicuously displayed in the canteen. 100. Accounts.~ (1) All books of accounts.regis­ ters and any other documents used in connection with the running of the canteen' shall be produced on demand to an Inspector. " (2) The accounts pertaining to the canteen shall be audited, once in every twelve months, by regis- . tered accountants and auditors. The balance sheet prepared by the. said auditors shall be submitted' to the Canteen Managing Committee not late]:' than ,two months after the closing of the audited accounts: Provided that the accounts pertaining to the canteen . in a Government factory having its own accoilnts department, may, be audited in such department: Provided further that', where the canteen is ,managed by a c~operative SOCiety registered under the Co-operative Societies Act, the accounts pertain­ 'ing to such canteen may be audited in accordance (3) The manager shall determine and supervise the procedure for elections to the Canteen Manag­ ing CC!lllnittee~ (4) Canteen'Managing Committee shall be re­ constituted every two years and the previous Ma­ ,naging Committee. shall hold office till such time as the new Rommittee takes charge. 102. Annual medical examination. -'- (1) . Annual medicalc examination for fitness of each member of the canteen staff who handles foodstuffs shall be carried out by the factory medical officer or the Certifying Surgeon, which shall include the following: -.C. " (a) routine blood examination; .. (b) ro~tine . and bacteriological testing af faeces· .and, ,urine for germs of dysentary and typhoid fever; and . (c) any' ,other examination including chest Xcray .that may 'he considered. necessary by the factory medical officer or the Certifying Surgeon. '(2), Any person who in the opinion of the factory medical'officer or the Certifying Surgeon is unsuit­ able fol' employment ()n account of possible risk to the' healt\l .of others, shall not be employed as canteen staff. Rule .pre$~ribed under Section .47: 103; Shei&rs, rest rooms and lunch rooms. -, The shelters. or rest rooms aqd lunch. room!!! shall con.­ form to the. following standards:-,- (a) the huilding shall be soundly constructed and, all the walls and roof shall be of suitable heat resisting material!!! and shall be water-pr.oof. Tlie floor and walls to a height of 90 centiInetres ' shall be so laid or finished as to provide Ii smooth, . hard and impervious surface; 128~ ____________________ -:-_________ .::SERIE_S_I_N_o_. _5: .. (b), the height of every room in the building shall be not less than 3.75 metres from floor level to the lowest part of the roof and there shall be at least 1.12 square metres of floor area for every person employed: Provided that- (i) workers who habitually go home for their meals during the rest periods may be excluded in calculating the number of workers , to be 'accommodated, and (ii) in the case of factories in existence at the date of commencement of the Act, where it is impracticable owing to lack of space to provide 1.12 square metres of floor area, ,for each person, such reduced floor area 'per person shall be provided 8.l? may be apPl'oved in writing by. the Chief Inspector: Provided further that, in the case of rooms in buildings . in . existence at the date' of the coming into force of this rule which have been or are intended to be 'adopted for use as shelters or rest-rooms or lunch-rooms, as the case may be, the Chief Inspector may approve the rooms having such reduced height as may in his opinion be reasonable in the circumstances of the case on such conditions as. may be deemed expedient. (c) Effective a';d suitable provision shall be :made in every room for securing and maintaIning adequate ventilation by the circlllation of fresh air and .there shall also be provided and main­ tained sufficient and suitable natural or artificial lighting; (d) every room shall be adequately furnished with chairs or benches with back-rest; (e) sweepers shall be employed whose primary duty shall be to keep the rooms, buildings and precincts thereof in a clean and tidy condition; (f) suitable provision shall be made in every room for supply of drinking water and facilities for 'washing; and ' (g) the lunch room shall be provided with adequate number of tables with impervious tops for the use of workers for taking food.' Rules prescribed under sub-section (3) of Section 48: 104. Creches. - (1) The creche shall be conve­ niently accessible to the mothers of the children accommodated therein and so far as is reasonably practicable it shall not be situated in close proxi­ mityto any part of the factory where obnoxious 'fumes, dust or odours are given off or in which excessively noisy processes are carried on. (2) The buildings in which the creche is situated shall be soundly constructed and all the walls and roof shall be of suitable heat resisting materials and shall be watel'proof. ,The floor and internal walls of the creche shall be so laid or finished as to provide a smooth. impervious sunace. , (3) , The height of the rooms in the building shall be not less, than ,3.75 metres from the floor,' to the lowest part of the roof and there shall be not less than 2. square metres of floor area for each child to be accommodated: ---~~=~""-' .. ~='''-- - Provided hat in ,the ca~e of rooms in buildings in existence' at the date of the coming into force of these Rules and which have been or are intended to be adapted for use as a creche, the Chief ,Ins­ pector may approve the rooms having such reduced height as may in his opinion be. reasonable III the circumstances of the case on such conditions as, may be ,deemed expedient. (4) Effective and suitable provision shall be made in every part of the creche for securing and. maintaining adequate ventilation by the circulation of fresh air. (5) The creche shall .be adequately furnished and. equipped and in particula.r there shall be one suit­ able cot or cradle with the necessal'Y bedding for each child: Provided that for children over two years of age it will be sufficient if suitable bedding' is made available and at least one chair or equivalent seat­ ,ing accommodation for the use of each mother' while she is feeding or attending to her child, and a sufficient supply of suitable toys for the older' . children. (6) A suitably fenced and shady open air play­ ground shall be pro"ided for the older children: Provided' that the Chief Inspector may by order . in writing exempt any factol'Y' from compliance with this sub-rule if he is satisfied, that there is, no sufficient space available for the provisien of' such a play-ground. 105. WaShroom. - (1) There shall be in or adjoin­ ing the creche a'suit,able washroom, for the wash­ 'ing of the children and their clothing. The wash­ room shall conform to the following standards:- (a) the floor and internal walls of the room to a height of 90 centimetres shall be so laid 01'­ furnished as to provide a smooth impervious surface. The room shall be adequately lighted and ventilated and the floor shall be effectively' drained and maintained in a clean and tidy con- dition; , (b) there shall be at least one basin or, similar , vessel for every four children accommodated in the creche at anyone time together with a. sllPply of water provided,if practicable, through taps from a source approvel'! by' the Health Of~icer. Such source shall be capable of yielding' fer each child a supply of at least 23 Htres of water ,a day; and (c) an adequate supply 'Of clean clothes, soap .. and clean towels shall be lllade available for each child while it is' in the creche. (2) Adjoining the washroom referred to in sub- . rule (1), a latrine shall be provided for the sole use of the children in the creche. The' design of' latrine and the scale of accommodation' to be pro­ vided shall either be approved by the Public Health 'authorities or, where there is no such Public Health authority, by the Chief Iuspector of Factories. 106. Supply of milk and refreshment. - At least 300 m!. of clean pure milk shall be provided for' each child every day it is accommodated in the creche and the mother of such a child shall be 3RD MAY, 1985 (V AISAKA 13, 1907) allDwed in the cDurseof her daily wDrk tWD intervals .of at least fifteen minutees each .other than. those allDwed under sectiDn 55 tD feed the child. FDr chil­ dren above tWD years .of age there shall be provided in additiDn an adequate supply .of' whDlesome refreshment. 107. Creche sWf. - FDr each creche there shall be appDinted a WDman in-charge and an adequate number .of female· attendants to help the woman in-charge. The creche staff shall be prDvided with suitable clean clDthes fDr use while .on duty. 108. Qualifications of woman in-charge. - (1) Except as prDvided in sub-rule (2), nD WDman shall reappDinted under rule 104 as a WDman in-charge .of a creche unless she pDssesses the qualificatiDns prescribed fDr a midwife under any law in fDrce Dr prDduces a' certificate that she has undergDne training fDr a period .of nDtless than 18 months in a hDspital, maternity hDme Dr nursing hDme apprDved in this behaifby the Chief InspectDr, Dr prDduces a certificate that she has received training fDr a pre-primary teacher in an institutiDn apprDved by the GDvernment. (2) The prDvisiDns .of sub-rule (1) shall nDt apply in the case .of a WDman WhD is in-charge .of a creche in a factDry inunediately befDre the CDrning intD fDrce .of these rules, and any rules regarding qualificatiDns .of such wDman-in-charge .of a creche prevailing priDr tD the cDming' intD fDrce .of these rules shall apply tD her. ". Rule prescribed under section 50 read witli Section 48: 109. Exemption from the provision of creche.­ (1) In factDries where the number .of married WDmen Dr widDWS emplDyed does nDt exceed. 15 Dr where the factDry wDrks fDr less than 180 days in a calendar year, Dr where number .Df children kept in the creche was less than 5 in the preceding year, the Chief InspectDr may exempt such factories frDm the prDvisiDns .of sectiDn 48 and the rules 104 tD 108 made thereunder, if he' is satisfied that alternate arrangements as stipula:ted under sub­ rule (2) are prDvided by the factDry. (2) (a) The alternate arrangements required in sub-rule (1)' shall include a creche, building which has a minimum accDmmodatiDn at the rate of 1.86 square metres per child and cDnstructed in ac, cDrdance with the plans apprDved by the Chief InspectDr. (b) The creche building shall have- (i) a .suitable washroom fDr washing .of the children and their CIDthing; (ii) adequate supply .of soap and clean ckthes and tDwels; and (iii) adequate number' .of female attendants WhD are prDvided with suita.ble clean C1Dthes fDr use while .on duty tD look after the children in the creche. (3) The exemptiDn granted under sub:-rule (1) may at any time be withdra'\VIl by the Chief In~pec­ tor if he Imdsafter such enquiry as he may deem fit, tnat the' factDry has cDmmitted a breach of the prDvisiDn .of this rule. 129 Rule prescribed under sub-section (2) of Section 49 and Section 50: .110. Welfare Officers. - (1) Number .of Welfare Officers- (a) The .occupier .of every factory emplDying between 500 and 2000 wDrkers shall apPDintat least .one Welfare Officer, and where the number . .of WDrkers exceeds 2000, there shall be an addi­ tional Welfare Officer fDr every additiDnal 2000 worker,.- or fractiDn thereof .over 500. In a factDry where bDth men and women workers are em­ ployed, the number of WDmen Welfare Officers tD be appDinted shall be in propDrtiDn to the WDmen wDrkers emplDyed prDvided that where the number .of WDmen emplDyed is mDre. than 100 and the tDtal number .of wDrkers dDes nDt exceed 2500 an additiDnal WDmen 'Welfare Officer shall be appDinted. ' (b) Where there are mDre thii.n .one Welfare Officer appDinted, .one .of them shall be called the Chief Welfare Officer and the .others Assistant Welfare Officers. (2) Qualifications. - A persDnshall nDtbe eligi­ ble fDr appDintment as a Welfare Officer unless he- (a)' pDssesses a: degree .of a University recDg­ nised by the Government in this behalf; (b) has .obtained a degree ()r diplDm~ in sDcial science frDm any institutiDn . recDgnised . by the Government in this behalf; and" , . (c). has adequateknDwledge .Df the language spDken by the majDrity .of the wDrkers in the factDry tD which he is tD be attached: PrDvided that the Government may, bynDtifica­ tiDn in the Official Gazette, grant exemptiDn frDm the prDvisiDns .of clause (b) in' ,suitable cases till such time better facilities in the matter .of traiuing in sDcial science are available. ' PrDvided further that, in the pase . .of a persDn WhD is acting as a Welfa!,'e Officer. at the CDmmen­ cement .of these rules, the Government, may, subject tD such cDnditiDns as it may specify, relax. all Dr any .of the afDresaid qualificatiDns. . , (3) Recruitment .of Welfare Of/icers- (a) The post .of a Welfare Officer shall be adver­ tised in at least tWD newspapers having a. wide circulatiDn in the State, .one .of which shall. be an English newspaper; . (b) The .selectiDn shall be made frDm amDng the candidates applying fDr the. post by a CDm­ mittee appDinted by the occupier .of the factDry; (c) The .apPOintment when made shall be nDti­ fied by the occupier to the Government Dr such' authority as iAe GDvernment may specify fDr this purpose, giving full details .of the qualificatiDns, etc. .of the officer 'appDinted and the cDnditiDns .of his service. (4) Oonditions of service of Welfare Officers­ (a) A Welfare Officer shall bagiven appro­ . priate status cDrrespDnding to the status .of the other executive heads .of the factory and he shall be started .on a suitable scale .of pay; . 130 (b) The conditions of service of a Welfare Officer shall be the same as of other members of the staff of corresponding status in the factory: Provided that, in the case of discharge or dismis­ sal the Welfare Officer shall have a right of appeal to the Government whose decision thereon shall be final and binding upon the occupier. (5) Duties of Welfare Officers ~ The duties of the Welfare Officer shall be:- (a) to establish contacts and hold consulta­ tions with a view to maintaining harmonious relations between the factory management and workers; (b) to bring to the notice of the factory management the grievances of workers, indi­ vidual as well as collective, with a view to se­ curing their expeditious redress and to act as a liaison officer between the management and labour; (c) to study and undrestand the point of of view of labour in order to help the factory management to shape and formulate labour policies and to interpret these policies to the workers in a language they 'can understand; (d) to maintain good industrial relations by using his influence in the event of a dispute between the factory management and workers and bringing about a settlement by persuasive effort; , (e) to advice on fulfilment by the management 'and the concerned departments of the factory of obligations, statutory or otherwise, concern­ ing regu.lation of working hours, maternity be' nefit,medical care, compensation for injuries and sickness and other welfare and social bene­ fit measures ; (f) to advise and assist the management in the fulfilment of its obligations, statutory or otherwise, concerning prevention of personal injuries and maintaining a safe work environ­ ment, in such factories where a Safety Officer is 'not required to be appointed under the enab­ ling provisions under Section 40 B; (g) to promote relations between the con­ ,cerned departments of the factory and workers which will bring about productive effiCiency as well as amelioration in the working condi­ tions and to help workers to adjust and adapt themselves to their working environments; (h) to encourage the formation of Works and Joint Prqduction Committees, Co-operative Societies and Welfare Committees, and to su­ pervise their work; (if to encourage, provision of amenities such as ,canteens i shelters for rest, creches, adequate l!Ltrine faei ities, drinking water, sickness, ,and benevolent scheme payments, pension and supe­ rannuation funds, gratuity payments, granting of loans and legal advice to workers; " (j) to help the factory management in regu­ latingthe grant of leave with wages ana explain to the workers the provisions ,relating to leave with wag~ and othen leave privileges and to SERIES I No. 5 guide the workers in the matter of submission of application for grant of leave for regulating authorised absence; (k) to advise on provision of welfare facili­ ties, such as housing facilities, foodstuffs, social and recreational facilities, sanitation, advice on individual personnel problems and education of children; (I) to advise 'the factory ,management on questions relating to training of new starters, apprentices, workers on transfer and promotion, instructors and supervisors, supervision and control of notice board and information bulle­ tins to provide further education to workers and to encourage their attendance at technical institutes; and (m) to suggest measures' which will serve, to raise the standard of living of workers and in general promote their well-being. (6) -Welfare officers not to deal with disciplinary cases Or appear on behalf of the management' against workers - No Welfare Officer shall deal with any discipli­ nary cases against workers or appear before a conciliation officer in a court or tribunal on behalf of the factory management against a worker or workers. (7) Powers of exemption- The Government may, by notification in the Offical Gazette, exempt any factory or class or description of factories from ,the operation of all or any of the provisions of these rules subject to compliance with such alternative arrangements as may be approved. CHAPTER VI WORKING HOURS OF ADULTS Rule prescribed under sub-section (2) of section 53. 111. Compensatory holidays. - (1) Except in,' the case of workers engaged in any work which for technical reasons must be carried on continuously throughout the day, the compensatory holidays to be allowed under sub-section (1) of' section 53 of the Act shall be so spaced that not more than two holidays are given in one week. (2) The manager of the factory shall display, on or before the end of the month in; which holidays are lost, a notice in respect of ,workers allowed compensatory holidays during the following month and of the dates thereof, a.t the place at which the notice of periods of work prescribed under section 61 is displayed. Any subsequent change in the notice in respect of any compensatory holiday shall be made not less, ,than three days in advance of the date of that holiday. (3) Any ,compensatory holiday or holidays to which a worker is entitled shall be given to him before he, is discharged, or dismissed; and shall not be reckoned as part of any period of notice required to be given before diSCharge or dismisSal. , (4) _ (a) The mana.ger shall maintain it register in form 16: I' 3RD MAY, 1985 (VAISAKA 13,1907) Provided that, if the Chief Inspector of Factories is of the opinion that any muster roll or register maintained as part of the rontine of the factory or return made by the manager, gives in respect of any or all .of the wQrkers in the factory the parti· culars required for the enforcement of section 53, he may, by order in writing, direct that such muster roll. or register .or return shall, to.the corresponding extent, be maintained ·in place of and be treated as the register or return required under this rule for that factory. (b) The register' maintained under clause (a) shall be preserved for a period .of three years after the last entry in it and shall be produced before the Inspector on demand. 112: Factories exempted under Section 58.- (1) The Printing Presses attached to the newspaper offices shall be exempted from the pr.ovisions of sub·section (1) of section 58, subject to the follow· ing conditions, namely:- In such printing press ~ (i) the workers of each relay shall bear a badge of distinct colour which will identify the worker of one relay from t!tat of the other; (ii) the colour of the badge to be worn by the workers of each relay shall be specified in the notice of periods of work requ,ired to be dis· played and correctly maintained under sub· ·section (1) of Section 61 and in the copies .of the notice to be sent. to the Inspector under sub-sections (9) and (10) of the said section; (iii) a flag or light having the same colour as that of the badge to be worn by the workers . of any relay actually at work shall be displayed during the time of actual working .of .one or more relays in the department concerned; (iv) each worker engaged in the work carried on by means of over·lapping shifts shall be in possession of an identity card. The identity card shall be supplied to the worker by the factory management free of cost and shall bear the photograph of the worker, his full name, sig. nature or thumb impression and visible iden· tification mark and· the signature of the ma· nager. Muster Roll prescribed under sub·section (4) of Section 59: 113. Muster roll for exempted factories. - The manager of every factory - , (a) which is exempted under Section 5, or (b) in which workers are exempted under section 64 or section 65, fr.om the provisions of ~ection 51 or section 54, shall keep a muster roll m F.orm NQ.17showing the normal piece work , rate of payor the rate of pay per hour of all the . exempted workers in the factory. . In this muster roll it shall be correctly entered the:. extent of .overtime. worked by each worker together with the .overtime earnings in respect thereof and the dates.of the payment of such earning. .The muster roll in Form No. 17 shall always be '.available, and produced for inspection whenever required by an Inspector. 131 114. Overtime slips. - AII-Y w.ork done by a worker beyond the n.ormal specified period .of w.ork shall be entered in the overtime slips in duplicate. indicating therein the actual period of overtime' worked by him. A copy of such overtime slip duly signed by the manager or by a person duIy authorised by him in that behalf, shall, begivell to the worker imme· diately .after completi.on .of the overtime work:. . Provided that if the Chief Inspector of Fact.ories is satisfied that in view .of the nature of work carried out in the factory, it is not possible to . issue daily slips to the workers, he may. perDlit issue .of weekly slips. ' Rule prescribed under Section 60: 115. Dou~le employnNlnt of workers;..,.... (a) The Inspector may sanction the "empl.oyment .ofaduIt W.orkers in'more than one factory on the same day if he is satisfied that such adUlt worker is allowed to work not more than forty eight hours in a week and is all.owed weekly holidays as per section 52. (b) A note under the initials of the Inspect.or . shaH be made in the remarks' column of a Register .of such workers permitted to work in more than one' factory, . Notice prescribed under sub·section (8) of Section 61: 116. Notice'of period of work for adults. - The notice of. periods of work foraduIt workers shall be in FQrm 18. Register prescribed under sub,sedion .(2) of Sedi~;;' 62: 117. Register of adult w~.-The register of adult workers shall be in Form 19. .,' . Rules prescribed under Section 64: 118. Persons defin!ld to hold positions of super­ vision or management or confidential' position.­ The following persons shall be deemed to hold posi· tions of supervision or management or to be em· ployed in a confidential position in the factory:- (a) All persons specified in the Schedule anne· xed hereto. (b) Any other person who, in the opinion of ~e. Chief Inspector holds a position of super· VISIon .or management or is employed in a confi. dential position. . SCHEDULE List of persons defined to hold positions of S!1pervisioos of Management· tn Factories Manager. Assistant Manager Labour Officer Welfare Officer I. All Factories Department Heads and Assistants Engineer and certified Assistants Electrical Engineer Head Storekeeper and Assistants Boiler SeraI!-g or such Boiler Attendants who are in charge of battery of boilers and are only required to do supervisory wQrk Technical Experts 132 II. Engineering Workshops; Foremen Inspectors Chargemen Workshop Overseers (In addition to persons in the list 'I - All Factories' , above). Provided that all time keepers employed in a factory within the meaning of sub~section (1) of section,2 shall be deemed to be employed in a con­ fidential position in the factory. 119. List to be maintained of persons holding confidential position or position of supervision or management. - A list showing the IJ.ames and desig­ nations of all persons to Whom the ,provisions of SUb-section (1) of section 64 have been applied shall be maintained in every factory. 120. Exemption of certain adult workers. -.:. Adult workers engaged in factories specified in column 2 of the Schedule hereto annexed .on the work spe­ cified in ,column 3 of· the . said Schedule shall be exempted from the provisions of the sections spe­ cified in column 5 subject to the conditions, if any, specified in column 6 of the said Schedule. SERIES I No; 5 Provided that- (.a) no female adult workers shall be required or allowed to work for more than nine hours in any day. (b) except in the case of urgent repairs- (1) No male adult workers shall be required or allowed to work-for more than ten hours in any day; (2) No male adult w()rker shall be required or allowed to work in- any quarter for more than fifty hours overtime on weekly limits. (3) Period of work for each male adult worker shall be so arranged that inclusive of his interval for rest, they shall not spread over more than twelve hours in al1Y day: - Provided further that the restrictions imposed by sub-clauses (1) and (3) shall not apply in the case of a shift worker mentioned in entries 110S. 8, 10, 11, 14 to 35(i), 36(i), 44 and 51 of the Schedule' who is allowed to work the whole or part of a subsequent shift in the absence of a worker who has failid to report for duty. SCHEDiJLE Section of Sr. the Act empowering No. grant of exemption 1 a 1. 64 (2)(a) and 64(3) Class of factory Nature of exempted work - 3 • AU factories Extent of ~mPtion 5 Conditions Sections Unless the Inspector gives per- 51, 52, 54, 55,· missio~ in writing for report... 56 and 61 . ing otherwise than as herein laid down, the" employment of persons on urgent repaIrs the manager- (I) shall send within twenty­ four. hours of the cornrnen· cement· of work on urgent repairs a written notice to the Inspector describing briefly the nature of the urgent repairs ~d' the pro­ bable period of- theii dura­ tion, and '(II) shall send weekly during the continuance of the work on urgent repairs a state­ ment giving the names of all persons who' have worked for more than nine hours in anyone day or for more than forty-elght hours 0 f the preceding week in a factory. Sue h statement. shall also shoW total num­ ber of hours worked each day of the w8jlk. (b) If the Inspector is of opinion that any work being carrl~ on or likely to be carrIed on in a factory as "urgent re­ pairs" is not "urgent repairs". the Inspector shall serve on the manager an Qtder to that effect, and the_ manager ,shall 1n respect of su~- ~ork not allow any worker to work in contravention of "the provi­ sions of sections 51, 52, 54, 55, 56 and shall comply WIth the provisions . contain~ in section 61. -" '-Jl!/ " X 3RD MAY, 1985 (VAISAKA 13, 1907) 1 2. 3. 4.. 5. 6. 2 64(2} (h) 64 (2)(h) and 64(3) 64(2) (e) and 64(3) 64(2) (e) . and 64(3) 64(2)(b) 64(2) (b) AU" factories other than those on continuous processes All factories (i) All factories (il), Cotton spin.:.""1ing and weaving mill Dyeing and ble~ch;ng factories . .01' depart­ me'nts Cloth printing factories o r department 0 f factories . carryin~ on printing. sanforizing, finishing and mer(;f>l'i­ sing of cloth 4 Work performed by- (i) All workers attending . to engines and bo~ers (ii) Workers attending to starting, stopping and maintaining' electri~ motors and connected switch-gear (iii) Departmental oi.!ers Work performed by drivers on lighting, ventilating and humidifying appa.ra­ tus Work performed by .. _. (i) Fire pwnpmen.· (ii) All personnel in the fi:"e­ -fighting staff VVork involved in cleaning blow room flues Work performed by h:.lermen Work in the nature oi pre­ paratory or complemen­ tary to main op~rations 5 Sections 51, 52, 54, 55, 56 and 61 Sections 51, 54, 55, and 61 Sections 51, 54. 55, !>6 . and 61 Sections 51, 54, 55 and 56 Sections 51, 54. 55 and 56 Sections 51, 54 an.d 56 133 6 (c) Intervais for food and rest shall be given to all workers allowed to work on such worl';:. (a) Such workers shall be allowed. not_ -less than two holidays in each period covered by four co~cutive statutory factory holidays and shall not ~>e allowed to work for more than six hours. on any of the other -two" weekly holidays; {b) The notice required by Sec­ tion 52, shall be delivered to the office of the ln$oectol' showing on which days' holi­ days will be allowed; (c) Intervals for food and rest shall be given to all workers allowed to work on' such wOl'k; (d) No worker shall be allowed to work for more than fifty four hours in anyone week and (e) Register or muster roll r~­ quired to be maintained under Section 62 shali show correc­ tly full particulars of periods ,within which each such wor­ ker may be required to work; entries in the register or muSter roll shall be up to date. (a) Intervals for food and rest shall be gi'ven 'to all su~h wor­ kers. (b) Register or nluster- roll requi­ red to be maintained under Section. 62 shall show cor­ rectly full particulars.of pe­ riods within which- each such worker may be required to work; the entries in the re­ gister, or muster-roll shall be up-to-date, . (a) Register or muster-roll re­ quired_- to be maintained under Section- 62 shall show cor­ rectly"full particulars of pe­ riods. within which each such worker ,may be required to work_; the entries in the re­ gister or muster-roll shall be up-to-date. . (b) Intervals for food and rest shall be given to workers allowed to work on such work. (a) No worker. shall be allowed to work _ for more than fifty­ -one hours in anyone weel\:. (b) No worker_ shall be allowed to work in such a manner that the spreadover exceeds two . and a half hours except on one day in a week previously notified to the Inspector when it shall not exceed twelve hours. , The. interyals for food and rest totalling one hour if working hours exceed eight and a half in a day or half an hour if working hours do not exceed eight and a half hours shall be given to worker every day and the' re­ gister or muster roll maintained in accordance with Section 62 shall show correctly the pe­ riods of work of each worker. 134 1 7. 64(2) (ll) 8. 9. 10. 11. 64(2) (il) 64(2) (d) 64(3) and 64(4) 64(2) id) and (4) 64(2) (eI) 3 Cloth printing factories All work or departments 0 f factories and bi.eat.h-" ing, finishing, meree- . rising. raising, ,dyeing. sfugeing and eani'orlz- in g "departments of factories. -AU - factories othel' ~.han cotton spinning and weaving mills. Oil -tank instnllatim'!..~ Public electricity supply factories generating' electricity in any ma­ nner and those engIne rooms and boiler de­ partments generating electricity in any ma­ imer for their own use employing workers on shifts of not more than eight hours each Oil tank installations (a) Work perfonned b~; oilers, and (b) vVork in mechanic shops smithies or fvun­ daries so far as such work is complementary to the main operations Work performed by \vorlcer in connection with pump­ ing operations Operation and maintenar..c(­ of- (i) Prime movers and au­ xiliaries, gene-rator3, tr­ ansformers and swit.ch­ gear OJ) Boilers and auxiliaries Work performed by furna­ cemen and firemen .~- 5 Sections' 55 Sections 51, 54 and 56 Sections. 51, 52, 54. n3, 56 and 61 Sections 51, 52, 54, 55 and 56 Sections 51,54 and 56 SERIES I No.5 6 (a) Workers shall be allowed. to work on shifts of not longer than eight hours' duratitlH. (b) Intervals foJ;' food and rest shall ,be given to all workers allowed to work 'on such work. This exemption shall not apply ~ (i) in the case of worl~ per­ fonned by oilers, where these worlrers or the fac­ tOries in which the work have been exempted from the provisions of Section:.; 52 ·or 55; and (ii) to the work in the me­ chanic shops, smithy or foundry' portion of engi­ neering workshops or to ·a smithy or foundry used solely as' such. (a) Intervals for food and' rest shall be given to all workers allowed to work on such work. '(b) A compensatory rest period of at least twenty-four 'conse­ cutive hours shan be given to -each worker after the cessa­ tion of the pumping opera­ tions continuing after :0 :00 p. m. (c) Notice of such pumping ope­ rations v.1.th the nwnber of workers allowed to work shall be sent to ,the Inspector as soon as possible after com­ mencement of such work. (d) Exemption from Section 61 shall be availed of only during the continuance of pumping operations. (a) (b) TIle wo!'kers shall be allowed to work on shifts of not longer than eight hours dura­ tion. In the absence of a worker who has failed to report for duty on a shift, the worker may be allowed to work the whole or part of a subsequent shift provided that the ne.xt shift of the shift worker shall not commence before a period' of is. hours has elapsed after the (specified) stopping time of the shift to which the wor:ker belongs. (c) No worker shaH be allowed to work for more than fifty­ -six hours in any one we~k except that when employed as in condition (b) above he sh~ll not' be allowed to work for more than sixty-four' hours in anYone week. (d) Such workers shall be allowed not less than two holidays in each period covered by four consecutive statutory factory' holidays. (e) Intervals for food and rest . shall be given 'to all 'Workers , allowed to work on such work. ( 3RD MAY, 1985 (V AISAKA 13, 1907) 135 1 12. 13. 14. 15. 16. 17. 18. 2 64(2) (<\) and 64(4) 64(2) (d, and (i) 64(2)(d) and 4. 64(2) (d) and 64(4) -do-_ -do- 64(2)(d) and 64(4) 64(2)(d) and 64(,) 1~. -'-do- 20. 64(2)(d) 64(4) 21. -do- 22. -do- 23. -do- 24. 64(2) (b) 3 Factories refining crude mineral oil . (a) All continuous process W 0 r k performed by plant operators, fire­ operators, telephone operators, laboratory testers and analysts, maintenance and instru­ ments persOlUlel con­ nectoo with 'continuous process work, dressers and sample carriel's (b) Workperfonned by workers engaged in dis­ charging and "loading tankers • Sections 51, 52, 54, 55 and 56 Sections _51, 52, 54, 55 56 and 61 • As in exemption No. 10 . (i) Interval for food and rest shall be given to all workers allowed to work in Stich work. (ii) Exemption from section 61 shall be availed of only dUM, ring, ,t!te continuance of the operations, and· (iii) Notice of pumping operations with the number of worker;,! allowed"to work shall be seni: to the Inspeetor as ooon as' possible' after the commen-' cement of such work . (c) Work performed hy Sa- ' fety Operators Sections 51, 52, M. and 56 . As in exemption No: 10.- 55. Electrical receiving sta­ tions and sub-stations or in any factory the department of the factory receiving and distrlbuting electrical energy for the llse of the factory Factories or d epa r t­ men t s of factories charging electrkal accumulators Distilleries Sugar factories Chemical factories Vegetable oil hydroge­ nation factories. Operation and maintenance of transformers and their auxiliaries including recei­ ving and distribution, ,swi­ tch gear, lighting arrp...s-, tors, synchroriou? and other condensers a...'1d ro- tar'y and static condensers Sections 51, 52, 5'1, 55 and 56, Operations in connection SectionS with charging electrlcal 51,52, 54. 55 - accumulators . and 56 Work on the extraction of. sugar from various bases, fermentation of's 1.;. gar juice ~d distillation 0 f fermented wash Sections 51, 52, 5-1, 55 and 56 Operations beginning with Sections receiving and '. _ weighment 51, 52, 54, 55 of cane and en~ with and, .56 bagging of sugar A.ll continuous process work - do- The work, viz .. refining blea- Sections ching, filtering, generation 51, 52,: 54 55 of hydrogen, hydrogenat- and '56 ing and deodorising pro- cesses also -compression of oxygen and the cylinder filling Magnesium -Chloride fae- The work on concentrating -do- tories. process Public pumping and com- All work pressol' stations Water supply pumping -- do - factories of railway works~ops Ice factories Work of the engine and compressor: drivers' and assistants and oilers Carbonic acid gas works Work. of firemen, pumpmen plant drivers, oilers and the filling of cylinilers Carbonic· acid gas works Work of firemen to light lyebQilers -do- --do- -do- Sections 51, -54 and 55 As in exemption No. 10. As in exemption No. 10. -do- -do-,-- -do-- As in exemp~ion No. It,. -do- - do--:- -do- -do- -do- (a) This exemption shall'be avai­ led of only one day when plant is restarted after clo­ sure. (b) Intervals for food . and rest shall be given to -' all . workers 'allowed to work on such work.' 136 1 2 25. 64(2)(b) 26. 64(2)(d) 64(4) 27. -do- 28. 29. 30. 3l. 32. 33. 34. 35. -do'- -do- -do- -do- -do- -do- -do- 64(2)(d) and 64(4) 64(2) (d) 36. 64(2)(d) 64(4) 64(2)(d) 37. -do- 38. -do- 39. 64(2) (b) 64(2)(c) 64(3) 40. 64(2)(d) 41. 64(2)(d) . and 64(4) 3 • Carbonic acid gas soli­ dification works AU w.ork blocks except packing Sections And oxygen factories Engine arid plant drivers, oilers and the filling, of cylinders Hydraulic pumping sta- AU work tions Paper, cardboard and . strawboard factories . working on three eight hour shift system Cement factories and asbestos cement facto­ ries Work performed by- male adult worker on choppers, digesters, kneador~. strai­ ners, and washers, beat­ ters, paper making ma­ chines, pumping plants, reelers and cutters All work on continuous pro­ cess units. Glycerine· factories All continuous process work Dextrine manufacturing - do - factodes Acetylene factories Generation of gas and filling of cylinders Starch factories working, All work except the on 8 hour shifts neering department workshops Potassium chlorate fac- Work in the cell-room tories 0) Ferrous -ferrous tories and non- All work on furnace metal fac- (ii) - do- Hot rolling engi­ and 51, 52, 54, 55 and 56 -do- -do- -do- -do-- -do- -do- -do- Sections 51; 52, 54, 55 and 56 Sections 51, 52 54. 55 and 56 Section 55 SERIES· I No.5 6 As in e~emption No, 10. -do- -do- -do -;- - do.,-- _do_ -do- --:- do- -do- As in exemption .No. 10. As in exemption No. 10. Workers shall be on shifts not longer than eight hours' duration. (i) Sodium and potas--. Work on furnace and Sections As in exemption. No. 10. s i u m bichromate crys~lisers . factories (ii) Sodium and potas'- All other work s i u m bichromate factories Oil mills Flour mills (i) Gur factories (ii) Gul' factories All continuous work All work The work performed by wor­ kers in crushing sugar­ -canes : All other work -except cru­ shing sugarcl1ne 51, 52, 54, 55 and 56 Section 55 -do- -do--:- Sections 51, 55 and 56 Sections 51, 54, 55, 56 and 61 Cement tile Factories Work on the "curing tiles" Sections 51 and 52 Glass factOl'ie~ All work except packing work and work in engi­ neering department Sections 51, 52, 54, 55 and 56 Workers shall be "allowed to work on the shifts of no longer than eigbt hours', durat~on. -----:do- --do~ . A notice shOwing the periods of work of the crusher shan be exhibited in the factory and a copy sent to the Inspector. (a) No worker shall be aUowed to work· for more than four hours on any day of the weekly holidays. (b) No worker shall be allowed tQ worl~ in consecutive weekly holidays. (c) No worker shall be allowed to work in excess of limits of weekly hours of work as laid down in section ~51, except. during the, week when the-· worker works on a weekly holiday as in (a) above and when his total hours of work may be allowed to exceed the we~kly liinit' laid down in section 51 by. the number of hours not exceeding 4 worked on the weekly holiday. As in exemption No. 10 . , f 3RDM.Ay; 19S5 (V AISAKA 13, 1907) lllt' 1 3 '. ; 4 :h):'Wbrk on furnace (ii) All continuous process work in Electrolytic Re­ fining Factories All work 5 Sections 51, 54 and 56 •• (a) Th'e ~ork.ir~ shalf)je;~liowe\:i to work on shifts of not longer than eight hours' duration. (b) Intervals for food and rest shall be given to aU workers allowed to work on such work. 44:', 64 (2)( d) Rubliertyre, fa~tories :AU tvork' Olicutiitg' proc~ss" Sectlorts' "'<it) ,Tlie worker,;: shaU' .Iie' 'anowi,j) ',and 64(,4), ',> "'. ,,,,; <",j" 51, 54, 55 and to workOh shift. ot notlonget' :- .. ;",' -"~-I 46. il4(iij(d) >'" and 64(4) . ,""; i'\ ,,' ;! ,,"," """ '-/1 'Pottery, Wdrks j" 49. 64(2)(d) ",)/ Plastic' -fatifories .-, , ," , 56 than .eight -hours' ~uration. Work in melting shop, swer­ fannen in furnace gas pro­ ducers, electrical sub-staN' tions and water and elec- ~., ,tric_~l gistr:1bll~~on. ,_ d~p~rt,- , . ·m~,F,i. ,,-. -:-",,-,.,,.,,;.':, ---,',"" Section 55 . (i) Work:: 'irl'l s6:ii/ boiiiilg ;-~,: Sebtlon pans, soap ~ng pans. 55 (b) In the absence of a worker . who has failed to report for duty, a shift worker may be allowed to work the whole or part of a subsequent shift provided that the next shift of the shift'worker shall not conunence before a. period of 16 hours has elapsed 'after the (spec,lfled) stopping time of the shift to which the wGrker belong;,. (c) Intervals for food and rest :.k I Ii)lall lilI';giv:en ~"all:)w<>rke..""S allowed to work on such wort .. (a) Workers shall ordinarily 'work on three 8 hours' shifts. Workers shall be allowed' to work on -shifts, of not longer than 8 hours' dUJ;"ation. (ii) 'AU continuous process Sections As in exemption ~o. 10. !;-'-';_;'y,:,wor,~r()~iR» c.on:tj,I),"ou~ _5_h:52r 54}.i~'55:; ;1'/: '-1.',' ;n<:J1;/) ;,::\2 l'l) Map,.-,m_akiIJg; pJants . jand:' 56 :::-/,i:wj (iii) All continuous 'prcicess ""s~ijHons - do ~ work in synthetic de- 51, 52, 54, 55 tergent plants including and 56 cartoning and packing carried out in a conti- ,', '~'''Y~fiuouS'"C'lUti:tf; - ';0 2'(.l)bW.ork of firemen kilns on Sectio.n (ii) Work tunnel on kilns Work of firemen on kilns 55 Section 52 and 55 Section 55 Work on plastic injection Section machine and plastic ex- 55 truding machines l (; (a) Workers shall be allowed to ,,"ork on shifts of not -longer than eight, hou~' duration. (b) No worker shall be allowed to work on consecutive weekly . ~olidays. (c) Ilitervalsfor food and rest shall be given to all -workers allowed ~ work on such work. (a) Workers shall be allowed to work on _ shifts of not longer. than eight hours' duration. (b) Ilitervals for food and rest shall be given, to all workers allowed to ~ork on such worl:. Workers shall- be allowed to work on shifts - of not longer than eight hours' duration. ': '-:-;c; ". , ,59.·~': 64(2) ('d) ': ~'-Pharmaceutical factories All continuous process work - do- Workers shal,l' be allowed to work on shifts of not longer than 8* hours' duration and on the condi­ tion that- ", i ",1, ,',Y.. (i),.~~y. s.,~~11 d,e &";.~te~ ,Inter, Vws for ,-tOdd an~/ rest' 'of 'at ~eallt Hilir/an holir'; ,,', (E) notice of'period'_of work shall not show more than 421h hours' work inclusive of un­ specified rest intervals. 138 1 2 51. 64(2)(c) 52. 64(2)(i) 00. 64(2)(d) 54. 64(2)(d) , 55. 64(2)(d) 56. -·do-. . 57. 64(2)(a) . and (d) . 3 All factories 4 Telephone Oper~to~s Section 55 Newspaper Printing Prow; (a) All work on daily news-;, Secti,ons cess paper 51, 54, 55 and 56 cashew Nut Factories eye 1 e manufact1:lring factories Confectionary Manufac­ turing (b) All work on weekly Sections newspaper 51, 54, 55 and 56 Oil extraction work Section 55 Work in colouring and ena- . Section melling section and semi- 55 -automatic plating plant. " '-" . Making of malted chocol,ate' Section flavoured food and cho- 55 co~ate making Chemical products fa.. Process of manufacturing Sections ctories activated carbon 51, 52, 54, 55 and 56 Cotton· spinning and :weaving mills Work on hot air sizing Section machines 55 SERIES I No. {}. 6 The intervals, for food and rest to­ t~l1ng ,on~, hour if working -hOurs exceed -eight and a half in a daly of half an hour if working hours do not exceed eight and a half hour shall ,be given to each worker every day and the same noted in the register of, lrlUster roll maintained in accordance with section 62. (a) No:woril;er. ·shali,. be .aIlowed to work' for more,' than 56 hours_ in any week. (b) No overtime shall be carried on except for two days prior to the date of the publiGation of the weekly newspaper. (c) The exemption under this, entry shall be availed of only in that section of the press where there is a breakdown of machinery. (d) Intervals' for .food and rest shall be given to all workers allowed to, work on such work. (a) Workers shall be allowed to· work on shifts of not longer than eight hours' duration. (b') , Intervals for food and rest shall be given to all workers allowed to work on such work. (a) Workers shall 'be allowed to work on, shifts of not longer ~ eigh~, hours' durati9.n. . (b) Intervals ·for food· and rest shall be given to all _workers allowed to work on such work. (a) Workers shall be allowed to work on shifts of not longer than~. eight hours' duration. (b) Intervals for food and rest shall be given to all workers allowed to work on such work. (a) The worker shall be allowed _to work on ~hift· of not longer than eight 'hours' c1uration.,., (bj No worker shall be allowed to work 'in such a manner that the spread. over exceeds twelve hours in any day and this shall be pennissible only_ in a case when a shift reliever working on continuous process does not attend at the- correct time and alternative rellef cannot be arranged. (c) No worker shall·be allowed to work more than fifty-six hours in any one week except. that wnen em.ployed as in condi­ tion (b) above he shall not be allowed to work for more than Sixty-four hOurs in anyone week. (d) Such workers shall be allowed not less than two holidays in each period covered by four consecutive statutory holidayS. (e) Intervals for food and rest shall be given to all workers allowed to work on .such work. (1) Workers shan be allowed to work, on shifts of not longer than 8 hours' duration. (2) Workers shall be given speci­ fied rest intervals for food and. rest. .?:. r .3RD MAY, 198!> . (V AISAKA 13, 1907) 1 2 58. 64(2)(d) . 59. 64(2)(1) and 64(3) -60. '. 64(2)( d) 3 4 Enamelled wire manu- Work. ·of enamelling of facturing factories wires All 'fa~tories . Loading and unloading of railway wagons Section 55 Sections 51, 52, 54, 55, '56 and 61 Factories' wh'e r e" the" 'W"o'rk of printing" coating'" Sec'tioD work of pail1ting',·~.<lrY- drying of collapsible tubes 55' ing, printing and re- drying:of metallic col- lapsible tubes is car- ried' out as a, continu- ous process if (a) Workex:s shall be._ aij.~w:ed to. . w6rl(-oI;1 "shift$ of"iiot'longer' than> eight: hours' duration. (b) Intervals for food and rest shall: :be given to [aIr w~rkers allowed to work'- ' . on' " such work. (a) Exemption from Section 61 may, -be availed of provided that every worker at the end of the day's work is supplied ,with a "note-shoWiilg':the total ';',DumQ'er·of-hours of work put c, iD: -by such worker. (b)ID.tOl"Val$ .. · .for food and rest . . .,' -.-shall"-be: given to. all workers aliowed to work' on such ·work. "The' worker~-shail "bti"a:llowed'to work on shifts o~, .\iiot--.c~~_~r; than 8 hours dutation. '61. 64(2) (d) " Leathercloth factories 'Working' of continuous CO!lt: ' Section.; (a) 'Workers ·shall. be:iillowed to work, on shifts of, ;not longer -62. 64(2)(d) -63." 64(2)(d) ~5. 64(2)(d) 64(2)(b) 64(2)(1) and 64(3) Gum industry Lime Bhattas Shellac factories All COtton Ginning fac­ tories ~, ing of PVC, drying fUSing, 55 . in hot air oven and eni .. · : 'bo~sing Work performed in· connee- Se¢tion tion witll slitting: dehus~ ~5" kIDg. grinding and' packing' section 55 ·tli~Ii,.,:~~gh,f·Aq~~S~· ',dti~~tion. (b) Intenrajs. for :fOod •. ana . rest shall" be' given to 3J.1:" workers , .... ;a.1lowed to.',w:ork. ,on such work. ,Intervals' :tor food~·a.nd' rest" shall be·,giv~n ·to:a!l:~~rl}~~·,engaged in . .such,.,wqrk,. so ho~ever.'.that· the. total "number" oj hours· ':of . ,work Wifuout:·;·intervals "does- not eXceedl six~ '." . (af'The\V()rkerS~,shiill be .:aii~wed ~,,' ,·to w'ork,;;'·on·'· shift .c6f 'not ! ~.< (~ longer.: ;than :;eight hours' du- Workers employed on BhO.ttas Sectio'n .' . '., 55 Work performed by Gin 'Sections Fitters 'and' ':, their 'assis~ 51, .. 52, 54, 55" tants, .. 56 .a~d ~k) ,-; 'rati9~ ~ .. ';" ,.L.' . (b) An interval.of half::an. hour shall' be' Biven to each worker ':for ,food',: and·. re~~·.' , (a) 'The "#orker"shall'be '311~wed -;>;' to work~r6ii ",shift o'f not longer "than J~.ig~t :::h<>.~rs··" d.uration. (b) 'A-n linterval of at least: half ,",an hou~ sha:1l: be.- given to 'each worker for food and 'rest. ,," ' , f'\: ... ' . _. , (a) Such wor)<er shall be' allowed 'not less"'than ~ 'two ,:holidays: in ' .... eac}i-:·period covered· by .four _ ' ,cons~cut1ve: ,'·statutory facwry "hoUdiys' ,'and: shall not, .be allowed'~t(tjwork for mbre than six hOurS. on any of the other . ,.~ two weeklY;holida.ys~;' .' . (b)';Tl)e'n~tlce 'required 'by Sec­ tion 52 shall be delivered. to the .office of the Inspector ,.1.):ho\ViIig:\on which day holidays ., .. ,',. Wll. b~ ;~~l9,'re4., ',-' . '. , . (c) Intervali;, Lfor food and rest shall b~' gi~en. t()· all. worke!:'S ,-.,: allowed·to!work -on' such' work. (d) No worker shall be. allowed to " work -.f9r·: ·:"more . than' snq:y , . hours in-;i,any ·one., w~ek; ·and ~e,) Register 'or muster,. 'rolL re­ quired to be maintained under ~ection ,az spall sh~:w cor­ rectly fulr~ pattlc.ulars of pe~' ,ric;>ds within. whi~, ~ea'ch, such worker, -may' .. be required to work; entt:U~ '.~ in, the re:gis~er .or mUl?ter r}:"oR'- shall be upto-~ date. ' '-f'. 140 1 2 • 5 6 \VOIding, colour sist~rs lacquering and coding carbon re- Sections ' As' in S~daJ No".' 10 eXcept· condi- 51;54, 55 and tion at (d) .. 56 67.6~di)id( A.!iFaci~rles , anjl,6H3) Work .on automatic equip- Sections (1) The limits .of work inclusive­ .of .overtime shall not exceed those mentioned in sUb-section (4) of section 54. . ;-.. -. ment engaged in galvani- 51, 52, 54, 55, zing, anodising antl ena- 56 and 58 Melling (2) The' exemption 'sh·a:l! be; . granted .only in - respect of­ adult male, _ workers. 68. 64(2)(k) ,';;':A.ny factory. or class or , .. _ description_of factories .": as may: be notified by ,'_ :;, _; _ ~ tht:;., .. qoyel::p.Ine::Q.~ in the ,; • OfflCI~1 Gazette Work of national importance Sections (1) The limits of work inclusive .of .overtime shall not exceed those mentioned in sUb-section (4) of sectiol;l 64, ,as may be notified by the 51, 52, 54, 55, Government in the Official 56 and 58 Gazette Emplilnation:' , J 1. The following shall be considered to be urgent repairs: - (a) repairs to any part of the machinery, plant or stl'tlcture of a, factory which are of such a nathr'e"tIi:jitdelay'infueir execution would ihvolve dang'EiFto'ii:ilina'u life 'or safety or the stoppa'ge of . manu'fl\ctUriIig' proCe1lS; .' ;,- ':_ ,',_ '" ' ' ,1 (bj"bfealraown repairs to the motive power, transmission 01' other essential plant·of· other factorieS;' collieries, railways, dockyards, charljoui-s, tramways,'ffiotor' transport, gas, electricaigene. rat$g.,andtiimsm,iSsion, pumping or similar essential or public utilitiy services carried out in geljerl\I'll'gineering. works and fo:undries and which are 'neceSsary to enable sudl cO)J.cerns to . maintain": their' ,main: .manufacturing processes, production or services during normal working hours;':.;· (c) r.epairs todeep.sea ships, and repairs to cOUUIJ,ercilfl air·craft done in a fact()ry which a.t:El essential;to .enable such ships or aircraft to leave port at proper ;time or continue their normal ope· rationsin.a sea·worthy or air.worthy condition, as the case may be; and , i~ ',: ~ . --;, (~),. repairs ,In. coUllection with a.charge of , motlVe p.o.wer, for example, from steam to electri· city or vice·versa; when such work cannot possibly bedo!iewithout<stopPl\ge of the normal manu· facturingpr6c~ss,., . ;-~: . 2. Periodical cleaning is not included in the terms "examining~~' or -~':repairirtg".: CHA..PTER VII " . :'0' . , - ,;' EMP~()YMENT. QF YOUNG PERSONS Noticepres~rib~d ,understib.section (3) of Section 72: ,- - .-" ':', . -,-: ,~; '-,() . . ,,}'- -, ,' .. -.' '-',',-. - . 121 •.. Notic6'of· ... pel'iods of works for children _ Th,:,notice'of periods of work for child· workers shall be m Form 20 '.' .' ,Re9jsterpr~sc::~jPecr~nde~~db.section (2) of Section 73: 122: ~!i;i#f,elCf6{eblid workers. - The register of Chlld"~or!<erS;~all'h,e in Form 21. This register shall be wrItten up "afresh each year and shall be preserved for a period Of twelve months. (2) The exemption shall be limited_ to adult male workers. ·OHAPTER.NIII Rules prescribed urider Sectl<llls83 and 112: ; 123. Register of leave with Wages. - (1) The Manager shall keep a register in Form 22 herein· . after called the register of . leave with wages: . Pfuvided:that if the Chief Inspector is of the opinion thiil any muster roll or register maintained as part of the routine of the factory, or return made by the manager, gives, in respect of any or all of the workers m'the factory, • the partiiJulars required for the ellforcement of Chapter VIII of the Act, he· iuay;by' order, in writing, direct that such muster roll or register or return shall to the corresponding' extent, be maintained in place of and be treated as the .register or return required .under: this, rule in res· pect of that factory . (2) The register of leave with wages shall be pre·· served for a period of three years after the last entry in it and shall be Produced before the Inspec., tor on demand. .. i24.Leave book. ~ (ljThe iuanager shall provide .. each worker who has become entitled to leave during' a calendar year, with a book in Form 23 (herein· after called the leave book) not later than the 31st January of the following. calendar year. The leave' . bo()k shall pe the ProPerty of.,the·worker and the manager or his agent shall notdeman9 it except to make relevant entries of the. dates of' holidays or' interruptions in service, and shall not keep it for' more than a week at a time:· . . Provided that in the case of a worker who is dis­ charged or dismissed from service during the course of the year, that is, who is covered under sub.sec. ~ion (3) of section 79 of the Act, the manager shall Issue an abstract from the register of leave with wages (Form 22) within a week from the date of' diSCharge or dismissal as the case maybe. (2) If a worker loses his leave book, the manager' shall provide. him with another leave book on the' payment of paise 25 and shall enter his record the.· reon- . 125. Medical certificate. - If any worker is absent from work and if he wants to avail himself of the !eave with wa~es due to him to cover the period of' Illness as prOVIded in sub·section (7) of section 79 he s;hall, if ~o. requir:d by the manager, produce ~. medIcal certIfIcate SIgned bya registered medicaL ... '" 3RD, ,MAY, 1985 (VAISAKA 13, 1907) practitioner or by a registered or recognised Vaid or Hakim stating the cause of the absence and the period for which the worker, is in the opinion of such medical practitioner Vaid or Hakim, unable to attend his work. 126. Notice to Inspector of involuntary tUlemp~oy­ ment. - The manager shall give, as'soon as possIble, a notice to the Inspector of every ,case wherein workers have been rendered involuntarily, unem­ ployed, giving numbers of persons. so unemployed and the reason fQr their unemployment. Entries to this effect shall be made in the register of leave with wages and the leave book in respect of each worker concerned. 127. Notice by worker.-Before or on the com­ pletion of a period of twelv~ mo~ths c!?ntinuous service in the factory, as defmed m section 79, a W'orker may give notice to the lD:anager o~his inte~­ tion not to avail himself of holJdays fallmg, due m the following period of twelve months. The manager shall make an entry to that effect in the register of leave with wages and in the leave book of the worker concerned. . 128. Notice of leave with wages. - (1) EXcept in regard to a worker who has given notice of his in­ tention not to avail himself of holidays in ,the year in which they fall due, the manager shall,by a notice displayed at the place at which the notice ?f ~e periods of work required under sec~ion 61 IS dis­ played; fix the dates on which leave WIth wages shall be allowed, to each Worker or group of workers in­ cluding any Worker W'ho h1\8 accumulated his leave. This date 0 shall not, in an individual case, be earlier than four weeks from the date of notice Unless the worker agrees to avail the leave earlier. The neces­ sary entries shall be made in the register of leave with wages and the leave, book of tjJ.e worker con­ cerned. (2) As far as circumstances permit, members of the same family comprising husband,wife and children shall be allowed leave on the same date. (3) The manager may alter the dates fixed for leave only after giving a notice of four weeks to the worker concerned. . (4) A worker may exchange the period of his leave with another worker, subject to the apprcval of the manager. 129. Payment of wages if the worker dies. - If a worker who is not entitled to advance payment in accordance with the provisions of section 81, dies before 'he resumes work, the balance of his pay due for the period of leave shall be Paid to his nominee a~d failing such nomination, to his legal represen­ tative within one week of the intiination of the death of the worker, ·For this purpose, each worker shall submit a nomination in Form 24 duly signed by himself and att"~ted by two witnesses, to the ma­ nager. The nomination shall remain in force until it is cancelled or revised by another nomination. 130. Register t;o be°mainmined in caSe of exemp­ tion tUlder section 84. ~ (1) Where an exemption is granted under section 84, the manager shall maintain a register showing the position of each worker as regards leave due,leave taken and Wages granted. 1"41 (2) He shall display at the main entrance of the factory, a notice giving, full details.of the system established, in the factQry for leave with wages and shall send a copy of it to the Inspector. , . ' (3) ,No alteration shall be made in the scheme approved by the GOVernllJent at,the time of granting exemption under section 84 Without its previous sanction. CHAPTER IX SPECIAL PROVISION >·0 Rule prescribed under Section 0 87: 131. Dailgeio1JSmanUfaettii'ing p~or . operations.- The folloWing manUfactUriIig prolle&-' ses or operatiop.s when carried on in any factory are declared to be dangerous rtianijfacturing processes or operations under section 87:- ' ' I. Manufacture of aerated water and pro­ cesses incidental thereto. II. Electmlyti\l plating or oxidation of,llletal articles by use of an electrolyte contain­ ing chromic acid or other chromium com- pounds. ' Ill. Manufacture and repair of electric accu- mulators. IV. Glass manufacture. V. Grinding or glazing of metals. VI. Manufacture and treatment of lead and certain compounds of 'lead. ' VII. Generating petrol gas fi-<im petroL VIII. Cleaning or smoothing;" roughening, etc. of articles by a jet of sand, metal shot or grit or other abrasive propelled bya blast of compressed air or steam. IX. Liming and tanning of rawhides and skins' and processes incidental thereto. X. Certahi lead processes' carried on in printing presses and type foundries. XI. Manufacture of pottery. > XII. Chemical works. XIII. Manufacture OI articles from refractory . materials. XIV. Handling and processi"g of asbestos, manufacture of any article of asbestos and any other process of manufacture or otherwise in which asbestos is used in any form. XV. Handling or manipulation of corrosive substances. XVI. Processing of cashewnuts. XVII. Compression of oxygen and hydrogen produced by the electroIysisof water. XVIII. Process of extracting oils lln.d fats from vegetable and animal sources in solvent extraction plants. ' , XIX. Manufacture or manipUlation' of manga­ nese and its compounds. --'--.. - ----_. 142 XX. Manufacture or manipulation of dange­ rous ~ pesticides. XXI.~ Manufacture, handling and uSage of ben­ zene and substances containing benzene. . XXII. . Manufacturing process or operations in carbon disulphide plants. . XXill. Manufacture or manipulation of carceno­ genic dye intermediates. XXIV. Operations involving high noise levels. . (2) The provisions specified in the schedules annexed 'hereto shall .apply to any class or ·descrip­ tion of factories wherein dangerous manufacturing processe:;l~ or operations spejlified in . each Schedule ar" c!!rried on .. (3) . (a) E'or the medical examinations of workers to be carried out by the Certifying Surgeon as re­ quired by the scheduie annexed to this rule, the occupier of the factory shall pay fees at the rate of Rs. 5/- per examination of each worker every time he is examined. (b) The fees prescribed in sub-rule (3) (a) shall be exclusive of any charges for biological, radiolo­ gical or other tests which may have to be carried out in connection with the medical. examinations. Such charges shall be paid by the occupier. . (c) The fees to be paid for medical examinations shall be paid into the local treasury under the head of account. '087 - Labour. and Employment, C­ Fees realised under the Factories Act, 1948'. (4) Notwithstanding the provision specified in the Schedules annexed to this. rule, the Inspector may, by issue of orders in writing to the manager or occupier or both, direct.them to carry out such mea­ sures, and within such time, ,as may be specified in such order with a view to ·removing conditions dan­ gerous to the health of the workers, or to suspend .. any process, where such process constitutes, in the opinion'of the Inspector, iinh1inent danger of poi- soning or toxicity. .'. . (5), Any register or record of medical examina­ tion . 'and tests connected therewith required to be carried out under any of the Schedules annexed hereto in respect of any worker shall be kept readily available to. the Inspector. and shall be preserved till the expiry of one year after the worker ceases to be in employment of the factory, SCHEDULE I Manufacture of Aerated Waters and, processes incidental thereto 1~ Fencing of machines. - All machines for filling bottles or syphons shall be so constructed, placed or fenced, as to prevent; as far' as may be practicable, a fregment of a bursting bottle:or .syphon from striking any person employed in the factory. 2. Face guards and gauntlets. - (1) The occupier shall provide and .ms,intain in good condition for the .use of all persons engaged in filling bottles or syphons- ~ , (a) suitable face guards to protect the face, neck arid throat; and .,. SERIES, INn.. 5 (b ) suitable gauntlets 'for both arms to protect the whole' hand and arm,,: . Provided that- (i) Paragraph' 2(1) shall not apply where bottles are filled by means of. an automatic .machine so .'constructed t):lat. no fragment· of a .. bursting . bottle can escape.. . (ii) wnere a machine is so constructed that only one arm of the bottler at work upon it is exposed to danger, a gauntletneed' not 'be provided for the . arm~wliich is riot exposed to danger . (2) The· occupier shall provide and maintain. in gooc'~ condition for the use of all persons engaged in corking, crowning, screwing, wiring, foiling, cap­ suling, sighting or labelling bottles or syphon-'- (a) suitable face-guards' to' protect the faee, neck and throat; and (b) imitable gu~tlets for both annsto proteCt . the arm· and at least half of the .palm and the space ,betweel). the thumb and forefinger. 3. Wearing o:f face guards and gauntlets. --,. All persons engaged in any of th,e processes spe­ cified in,p~ragraph 2 of this Schedule shall, while at work in such· processes, wear the face guards and gauntlets provided under· the provisio!'s of the said paragraph, . .. SCHEDULE II Electrolytic plating or oxidation of metal articles by use of an electrolyte containing chromic acid or other chromiumcomponnds ~ .. ' . 1. Definitions. - For the purposes of this Sche­ dule- (a) "electrolytic chromium process" means. the electrolytic plating or oxidation of metal articles by the use of an electrolyte containing chromic acid. or other .chromium compounds; (b) "bath" means any vessel used for an electro­ lytic chromium process or for any subsequent process;, (c) "employed" means in paragraphs 5, 7, 8 and 9 of this Schedule, employed in any process involving contact with liquid from a bath; and (d) "suspension" means suspension from em, ployment in any process involving contact with. liquid from any bath by written certificate in the health register . (Form 26) signed by. the Certifying Surgeonwh9 shall have power of sus­ pension as regards all persons employed in any such process. . . 2. Exhaust draught. - An efficient.· exhaust draught shall be applied to every. vessel in which an electrolytic chromium process is .carried on. Such draught shall be provided by mechanical means and shall operate on the vapour or spray given off in the process as near as may be at the point.of origin. The exhaust draught appliance shall be So cons­ tructed, arranged and maintained as to prevent the vapour or spray entering into any, room or p~ace in 'which work is carried on.' . :'. ". ~ 3. Prohibition "elating to .women :and ,young per­ sons.-No woman, adolescent or child, shall be employed .or permitted to work at a ·bath. - -, 3RD MAY, 1985 (V AlSAKA 13, 1907) 4. Floor of workrooms. - The floo1'9f every work­ rOOm containing a bath shall be impervious to water. The floor shall be maintained in good and level con-, dition imd shall be washed downat least once, a day. 5. Protective clothing. - (1) The occupier shall provide and maintain in good and clean condition the following articles of protective clothing for the use of all persons employed on any process at which they are liable to come in contact with liquid from a bath and' suCh • clothing' shall "be worn by the persons concerned- (a) waterproof aprons and bibs; and (b) for persons actiially working at a bath; loosefittingrubber gloves ad rn9ber boots 0, other waterproof footwear. ' (2) The occupier shall provide and maintain 'for the use "of all persons employed suitable accommo­ dation for, the storage and adequate arrangements for the drying of the protective clothing. 6. Cautionary placard. - A cautionary placard in the form specicified by the Chief Inspector and printed .in the langnage of the majority of, the workers employed shall be. affiXed hi;l.prominent place in the factory where it can be easily and con­ veniently read, by the workers. 7. M edicalrequisites. - The occupier shall provide and maintain a sufficient, supply of suitable oint­ ment and impermeable waterproof plaster in a'sepa­ rate box readily accessible to the workers and used solely for the purpose of keeping the ointment and plaster. ' , 8. Medical examination.- (1) Every person em­ ployed in electrolytic chrome process, shall be e;gamined by a Certifying Surgeon within 30 days of his first employment in the said process and if found fit, shall be granted by the Certifying Surgeon' a certificate of fitness in Form 25" and after the first examinatibn he shall be examined by the Certi­ fying Surgeon at interVals of not more' than 3 II!-onths: Provided that when the Chief Inspector of Fac­ tories is of the opinion that conditions of work, in the said process are unsatisfactory, he may by order in writing require the manager of the factory to have the person employed in the said process medi~ally examined by a certifying Surgeon at more frequent intervals. ' ': ,(2} If at any time,,' the Certifying. Surgeon is of the, opinion that any person is no longer fit for employment in the said pr<>cess on the grounds that continuance therein would involve special danger to the health of the worker, he shall cancel thecer_ tificatEi of fitness issued to him. '9.We';klYexaminations.- (1) The occupi&r of every 'factory shall appoint a qualified medicaJ practitioner whose appointment shall be subject to confirmation by the Chief Inspector. "(2) No person shall be employed in electrolytic chrome process unless he has been, examined and found fit for the said process by the qualified me­ dical practitibner. Such examinatien, shall include inspection of himds, forearms and nose alid Will be . ,- . -. - - - . 143 carried out at intervals of not more than .one week. ',l'he results' of ~ueh ~xamination shall be maintained in a health register in Form 26, The regi~ter shall be kept by the manager and shall contain the names of all persons, employed in the said process and the certificate of fitness in respect of each, person issued , by the Certifying Surgeon shallpe, attached thereto. (3) II at any time, the quaJifiedmedical practi­ tioner is of opinion that any person is no. longer fit for employment in the electrolytic cl1rome process, he shall make a record of his findings in Jhehealth register and intimate the manager in writing that the said person is ullfit for w.orkin the said process. • " -', - . ,', "... • >' : - '!" , -' , (4) A person so fo,uni1 unfit b~' the registered medical practitioner shall be,aent,by the manager to the Certifying Snrgeon With,;l. report fi·om: the qualified medical practitioner.' The Certifying SiIr- , geol1 after examination may suspend the said, person from, w:orking in,the said pr~esll."No.personafter suspension shjlll ,be, employed, WithoiIt 'written sanc­ tion frem the pertifying Surgeon entered, in or attached to the Health Register. Sc:HEDULEl.m, " " Manuf~and repafrof IlteicbicaOOUniiilatOrs 1. Savings. - This, Schedule shall not apply to the manufacture of repair of electric accumulators or parts thereof: not containing lea:d or any com­ pound'of lead; 'or to the 'repair on the premises, of any accumulator forming,'part .of astationary ,bat- tery. ' . ' ,,' 2. Dejinitions.-;--, Fer the purposes.of this Sche- dule. ' '(a) "lead process" ~eans, the melting .of lead or any material cpntaining lead,,'casting, pasting, lead burning, or any other \york, including trim­ 'ming, or any other abrading or: cutting .of pasted plates, involving the use, ,movement or manipula­ tion of, ,or .contact with, any oxide of lead; (b) "inanipula.tion of raw oiide' of lead" means any lead ,process involving ,any manipulation or movement of raw oxides of lead other than its conveyance in a receptacle or by means of an implement from 'one operation to another;' (c) "suspensi~n" means susp~nsion ,from em­ ployment in any lead process by writtencertifi­ cate .in .the health register (Form 7) signed by the, Cert:fymg Surgeon who shall ·have power of sus­ penSIOn a,s regards all persons employed in any s~ch process; and , __ '" ,'<-' (d). "first employme~t" meims 'first employ­ ment m, a lead process m a factory .or workshop and also re-employment there of in a lead process following any cessation of employment in such process for a period, exceeding three ,calendar months. 3. Prohibition"relating to women and young per­ son8. - No woman .or young person' shall be em­ ployed or permitted to work in any lead process or ill'any room in which the manipulation of raw oxide 'of lead or pasting is carried .on. ' " • , ' , • " ,:4. S~para,tion9f certain processes;,-' "Each of the followmg processes shall be carried on in' .such· a 144 manner and urider such con.ditions as to secur~ effective separation from one another, an<J.. from any other process- (a) manipulation of raw oxide of lead; (b) pasting; . (c) drying of pasted plates; (d) formation with lead bur¥ng (tacki~g) ne­ cessarily carried on in corujection thereWIth; (e) . melting down of pasted plates; and (f) the grid casting shop. 5. Air space. -'IIi every room in which le.adprc;>­ cess is carrilld on, there shall be at least 15.0 c;u.b1c metres of air space for each perroriemployed the­ rein, .arid in computing this air space.no height over 3.75 metres shall be taken into account. . 6. Ventilation. -Every workroom shall;be pro' vided with inlets arid outlets of adequate S1ZP. as to secure and maintain efficient ventilation in all parts of the room. 7. Distance between workers in pasting room.­ In every pasting room the distance between the centre of the working positioA of any one paster and that of the paster working nearest to him Shall not be less than 1.5 metres. S.Fw.or of workroom. - (1) The floor of every room in which lead process is carried on shall be- (a) of· cement or similar material'so as to be smooth arid impervious to water; (b) .maintained in sound condition; and (e) kept free from materials,. plant, or. other obstruction not required for, or produced m, the process carried on in the room. (2) In all such rooms other then grid, casting shops the floor shall be cleansed daily after being thoroughly sprayed with 'water at a time when no other work is being carried on in the room. (3) Irigrid casting shops the floor shall be cleansed daily. (4) Without prejudice to the requirements of sub-paragraphs. (1), (2) and (3),. wh<;re ma!lipula­ tion of raw oXlde of lead or pastmg 1S carried on, tile floor shall also be - (a) kept constantly moist while work is being done; (b) provided with suitable and adequate arran- gements for drainage; and . (c) thoroughly washed daily by' means of a hose pipe. 9. Wor~benches. -The work-benches at which any lead process is carried on shall- (a) have a smooth surface and be maintained in sound condition; and (b) be kept :free from all materials or plant not, required for, or produced in, the process carried on thereat; and all such work-benches other than those in grid casting shops shlill-'- SERIES INa . .5 . (c) be cleansed da.ily either afterbeingthorou­ ghly da.mped or by means of a suction ~leanii:tg apparatus at a time when riO other work 1S being carried on: thereat; and, all such work-benches in grid casting shops, shall.,- (d) be cleansed daily; ani:! every work-bench used· for pastiIig. shall- (e) be covered throughout with. sheet lead or other impervious ma.terial; (f) be, provided with ;raised edges; and· (g) be kept constantly moist while pasting is being carfied on; a.n:d every work-bench used for trimming,' brushing, filling or any other abrading or cutting of paSted ' plates shall- (h) be fitted with a top havingopenirig or grill which shall aljow ;my clippirigii; filing, or dust produced to all into a collecting trough contain­ ing water. 10. Exhaust draught. - (1) The following pro­ cesses shall not be carried on without the use of an efficient exhajlSt draught: - (aj melting of lead or materials containing lead; (b) manipulation of raw oxide 'of lead, unless done in an enclosed apparatus so as to prevent the escape of dust into the workroom; (c) pa.stln:g; (d) trimming, brushing, filing or any other abrading or cutting of pasted plates giving rise to dust; . and (e) lead burning, ollier than - (i) tacking in the. formation room; and (ii) chemica.l burning for tilemakjng of lead lining for cell cases necessarily carried on in such a manner that the application of efficient exhaust is impracticable. . (2) . Sllch exhaust draught shall'be effected by mechanical means and shall operate on the d~st or fume given off as nearly as may be lit its point. of origin, so as to prevent it entering the air of any 'room in which persons work. . 11. Fumes and gases from melting pots. - The products of comb.~stion. produced in the heating of any meltiIig pot shall not be allowed to escape into a room' in which persons work. ' . 12. Contai~ for dross. - A suitable receptacle with tightly fitting cover shall be provided and used for dross as it is removed from every melting pot. Such receptacle shall be kept covered while in. the workroom, except when dross is being deposited therein. . c '." 13>. Container for lead waste. -A stiitable recep­ tacle shall be provided in eve;ry workroom in whiCh old plates and waste material. which may give rise to dust shall be deposited. . '. .. 14. Racks and 8helvl3{J in drying room. - (1) The racks or shelves provided in any drying room shall 3RD MAY,}.985 (VAZSAKA 13, 1907) not be more than 2.4 metres from the floor nor more than 60 centimetres in width: Provided that as regards racks or shelves set or ' drawn from both sides t):J.e total width shall not exceed 120 centimetres., (2) Such raCks or shelves shall be cleaned. ,?rily after being thoroughly damped unless a~ effIcIent suction cleaning apparatus is used for thIS purpose. 15. Protective clothing. - (1) Protective clothing shall be provided and maintained in good, repair' for all persons employed in - (a) manipulation of raw oxide of lead; (b) pasting; (c) the formation room; and such clothing shall be ,worn by the .persons con­ cerned. (2) ''!'he protective clothing shall consist of. a waterproof apron and waterproof footv.:ear; and, ~ addition, as regards persons emplo~d m ~he manI­ pulation of raw oxide Of. lead' or m pastmg, ho:ad coverings. The head covermgs shall be washed daily. 16. M eS8TOO>n. - There shall be provided and maintained for the use of all persons employed in a lead process and remaining on the premises during the meal intervals, a suitable messroom, which shall be furnished with sufficient tables and benches, and . adequate 'means 'for warming food ... The messr~m shall, be placed. under the charge of a responsIble person, and shall be kept clean. 17. Cloakromn. - There shall be provided and maintained for the use of all persons employed in a lead process - . (a) a cloakroom for clothing put off during working hours with adequate arrangements for drying the clothing if wet, which accommodation shall be separate from any messroom; and (b) separate and suitable arrangements for the storage of protective clothing provided under para­ graph 15. 18. Washing facilities. - (1) There shall be pro­ vided and maintained in a clean state and in good repair for the use of all persons employed in a lead process- , (a) a wash place under cover, with either- (i) a trough with a smooth impervious surface fitted with a waste pipe without plug, and of sufficient length to allow of at least 60 centi­ metres for' every five such persons employed at anyone time, ,and having a constant supply of water from taps or jets above the trough at intervals of not more than 60 centimetres; or (ti) at least one wash basin for every five 'such persons'employed at anyone time, fitted with a waste' pipe and plug and having a cons­ tant supply of water laid on; (b) a sufficient supply of clean towels made of suitable materiaIs renewed daily, which supply, in the case of paStersand persons employed in the manipulation of raw oxide of lead, shall include a separate markedtowelfor each such wOrker; and 145 (c) a sufficient supply <?fsoap or other suitable cleansing material and of nail brushes. (2) There shall in addition be provided means of washing in close proximity to the rooms in which manipulation of raw oxide of lead or pasting is car-. ried on if required by notice in writing from the Chief Inspector. 19. Timeto be allowed for washing. ~ Before each meal and before.the end of the <;lay's work, at least ten minutes, in addition to the regoIar meal times, 'shall be allowed for washing to each person who has been employed in the manipulation of raw oxide of lead or in pasting: , Provided that 'if there be one basin or 60 centi­ metres of trough for each such person this para­ graph shall not apply. ' 20. Facilities jor bathing. - Sufficient bath. accom­ modation to the satisfaction of the' Chief Inspector shall be' provided for all persons engaged in the manipulation of ' raw oxide of lead or in pasting, and a suffident supply of soap and ,clean towels. 21. Food, drinks, etc. prohibited to workrooms.­ No food, drink, pan and supari or tobacco shall be consUlIuld or brought. by any worker into any work­ room in which any lead procesS is carried on. 22. Storage of lead oxides. - All bags containing or having contained oxide of lead shall be kept in a closed room used orily for this purpose. 23., Re~U8e 'Of paper or' cloth restricted. - (a) Paper once used for backing or drying pasted plates ,shall not be used again in the factory. (b) Cloth once used for backing or drying pasted plates shall not be stored or handled u~less it· is moist so as not to give off dust. 24. ,Medical examination. ~ (1) Every person em­ ployed in a lead process shall be examined by the Certifying Surgeon within seven days preceding or following the date of his first employment In' such process and thereafter shall be examined by the Cer­ tifying Surgeon once in every calendar month, or at such other intervals as may be specified in writing by the Chief Inspector, on a, day of which due notice shall be given to all concerned. (2) A' health register in Ferm 7 containing the names of all. persons employed in a lead process shall be kept. (3) No person after suspension shall be' employed in a lead process without wtitten sanction from the Certifying Surgeon entered in or attached to the health register. SCHEDULE IV GlasS manufacture 1. Definitions. - For the purposes of this Sche­ dule- , (iL) "efficient exhaust draught" 'means localised ventilation effected by mechimical means for the. removal of' gas, vapour, dust or fumes so as to prevent them (as far as practicable under the atmospheric conditions usually prevailing) from 146 escaping into the air of any place in which .~ork is carried on. No draught shall be deemed effICIent which fails to remove smoke generated at the point where such gas, vapour, fume or dust origi- nate; . (b) "lead compound" means any compound of lead other than galena which, when treated in the manner . described below, yields to an aqueous solution of hydrochloric acid a quantity of soluble lead compound exceeding, when calculated as lead monoxide, five per cent of the dry weight of the portion taken for analysis. The method of treatment shall be as follows:-::- A weighed quantity of the material which has been dried at 100 degrees centigrade and tho­ ,roughly mixed shall be continuously shaken for one hour at the common temperature with 1,000 times its weight of an aqueous solution of .hydro­ chloric acid containing 0.25 per cent by weight of hydrogen chloride. This, solution shall theTe­ ifterbe allowed to stand for one hour and then filtered. The lead salt contained in the clear filte­ rate shall then be precipitated as lead 'sulphide and weighed as lead sulphate. (c), "suspension" means suspension from em­ ployment in any process specified in paragraph 3 by written certificate in the health regIster, Form 7, sigIled by the Certifying Surgeon who shall have power of suspension as regards all persons employed in any such process. 2. Exhaust draught. - The following processes shall not be carried on except under an efficient exhaust draught or such other conditions as may be approved by the Chief Illspector: - . SERIES I No. 5 tb) the work-benches shall- (i) have a smooth surface and be' maintained in sound condition; and (ii) be' cleansed daily either after being thoroughly damped or by means of a suction cleaning apparatus at a time when no other work is being carried on thereat. 5. Use of hydrofluoric acid. - The following pro­ visions shall apply to rooms in which glass is treated with hydrofluoric acid..,-- (a) there shall be inlets and outlets. of adequate size so. as to secure and maintain efficent venti­ lation in all parts of the room; . (b) the floor shall be covered with guttaparcha and be tight and shall slope gently down to a covered drain; . (c) the workplaces shall be so enclosed in pro­ jecting hoods that openings required for bringing in· the objects to be treated shall be as small as practicable; and (d) the efficient exhaust draught shall be so contrived that the gases are exhaustl'd' down­ wards. . 6. Storage and transport of hydrofluoric acid.­ Hydroflvoric acid shall not be stored or transported except in cylinders or receptacles made of lead or rubber. 7. Blow pipes. - Every glass blower shall be pro­ vided with a separate blow pipe bearing the distin­ guishing mark of the . person to whOm it is issued and suitable facilities shall be readily available to every glass blower for sterilising his blow pipe. 8. Food, drinks, etc, pro1vi:bited. in workroom. - . (b) the dry grinding, gl!1Zing and polishing of .. No food, drink, pan and supari or tobacco shall be glass or any article. of glass; brought into or consumed by any worker in any (a). the mixing of raw materials to form a "batch" ; room or workplace wherein any process specified in (c) all processes in which hydrofluoric acid paragraph 2 is carried on. fumes or ammonical vapours are given off; 9. Protective clothing.-The occupier shall pro­ (d) all processes in the making of furnace vide, maintain in good repair and keep in a clean moulds or "pots" including the grinding or crush- condition for the use of all persons employed. in the ing of used "pots"; and processes specified in paragraph 2, suitable protec- . (e) all processes involving the use of a dry lead tive clothing, footwear and goggles according to the compound. nature of the work and such clothing,' footwear, etc.' shall be worn by the persons .concerned. . 3. Prohibition relating to women and young per- sons. -No woman or young person shall be em- 10. Washing facilities. -There shall be provided ployed or permitted to work in any of the operations and maintained in a clean state and in good repair specified in paragraph 2 or at any place where such for the use of all perSons employed in the processes operations are carried on. specified 'in paragraph 2; . 4. Floor and work-benches. _ The floor and work- (a) a wash place with either- -benches of every room in which. a dry compound (i) a trough With a smooth impervious surface of lead is manipulated or in which any process is fitted with a. waste pipe, without plug, and of. carried on giving off silica dust shall be kept moist sufficient length to allow of at. least 60 centi- and shall comply with the following requirements - metres for every five. such persons employed at (a) the floor shall be _. anyone time, and having a constant supply of water from taps or' jets above the trough at in- Ci) of cement or similar material so as to be tervals of not more than 60 centimetres; or . !\mooth and hp.pervious to water; (ii) at least one wash basin forevery five such (ii) maintained in sound condition; and persons employed at anyone tillIe, fitted with a (iii) cleansed' daily. after being thoroughly waste pipe·· and plug and having a.n adequate spread with water at a lillIe when no other work supply of water laid on or always readily avai- is being carried on in the room ; and lable; -- ""' I 3RD MAY, 19S5 (VAISAKA 13,1907) (b) a sufficient supply of clean towels made of suitable material renewed daily with a sufficient supply of soap or other suitable cleansing material and of nail brushes; and (c) a sufficient number of stand pipes with taps the number and location of which shall be to the satisfaction of the Chief Inspector. 11. Medical examination. - (1) Every person em­ ployed in any process specified in paragraph 2 shall be examined by the Certifying Surgeon within seven days preceding or following the date of his first employment in such process and thereafter he shall be examined by the Certifying Surgeon once in every , calendar month or at such other intervals 'as maybe specified in writing by the Chief Inspector, on a day of which due notice shall be given to all concerned. (2) A health register in Form 7 containing the names of all persons employed'in any process speci­ fied in paragraph 2 shall be kept. (3) Noper$on after suspension shall be employed in any process specified' in paragraph 2 without written sanction from the Certifying Surgeon entered in or attached to the health register. 12. Exemption. - If the Chief Inspector is' satis­ fied in respect of any factory or any class of process that, owing to the special.methods of work or the special conditions in a factory or otherwise, any of the requirements of this Schedule can be suspended or relaxed without danger to the persons employed therein, or that the application of this Schedule or any part thereof is for any reason impracticable, he may by certificate in writing authorise such. suspen­ sion or relaxation as may be indicated in the certi­ ficate for such period and on such conditions as he may think fit. 'SCHEDuLE V Grinding or glazing of metals and processes incidental there~ 1. Definitions. - For the purposes' of this Sche­ dule- , (a) "grindstone" means a grindstone composed of natural or manufactured sandstone but does not include a metal wheel or cylinder into which' ,blocks of natural or manufactured sandstone are fitted; (b) "abrasive wheel", means a wheel manufac­ tured of bonded emery or similar abrasive; (c) "grinding" means the abrasion, by aid of mechanical power, of metal, by means of a grind- stone or abrasive wheel; , ' (d) "glazing" means the abrading, polishing or finishing by aid of mechanical power, of metal, by means of any wheel, buff, mop or similar applianee to which any abrading or polishing substance is attached or, applied; , (e) "racing:" means the turning up, cutting or dressing' of a, revolving grindstone before it is brought into use ,for the first time; . (f) "hacking" means the chipping of the surface of a grindstone by a hack or similar tool; and , (g) "rodding" means thl:! dressing of the surfa,ce ' . of a revolving grindstone by the application of a , road, bar or strip of metal to such surface. ' 147 2. Equipment far removal of dust. - No racing, dry grinding or glazing shall be performed wi- thout- ' (a) a hood or other appliance so constructed, arranged, placed alid maintained as substantially to intercept the' dust thrown off; , (b) a duct of ,adequate ,size, air tight and so arranged as to be capable of carrying away the dust, which duct shall be ~ept free from obstruc­ tion and shall be provided with. proper means of access for inspection and' cleaning, and where, practicable, with a connection at' the end rembte from the fan to enable the 'Inspector to attach thereto any instrument necessary for ascertaining the pressure of air in the said duct; and , (c) a fan or other efficient Il).eans of producing a draught sufficient to extract the dust: , , Provided ,that the Chief Inspector may accept any other appliance that is,in his opinion, as effectual for the interception,; removal a.nd disposal of dust thrown off as a.hood, duct and fan would be. 3. Restriction on employment on grinding operar tions. - Not more than one person shall at any time perform the actual process of grinding or glazing upon a grindstone, abrasive wheel or glazing appliance: ' Provided that thisparagrapll shall not prohibit the employment of persons to assist in the manipu­ lation of heavy or bulky articles at any such grinds­ tone, abrasive wheel or glazing appliance. ' , 4, Glazing. - Glazing or other processes, except processes incidental to wet grinding upon a grinds­ toneshall not be carried on in'anyroom in which wet grinding upon a grindstone is done. 5. Hacking and ,rodding. - Ha,cking or rodding shall not be done unless during the process either an adequate supply of water is la\p,on at the upper surface of the grindstone or adecjhate appliances for the interception of dust are provided in accordance with the requirements of paragraph 2.' , ' . , " . 6 .. Examination of dust equipment. - (1) All eqUIpment for the extraction or' suppression of dust shalL at least once in every six months be exaniined , a?-d tested by a comp".ten~ person, 'and any' defect disclosed by such exammation and ,test shall be rec­ tified as soon as practicable. (2) A register containing parti~ulars of such eXa-' mination and tests shall be kept in ' Form 27., , 7. Exception. - (1) Nothing, in this Schedule shall apply to any factory in whicIi only repairs are carried on except any part thereof in which one or more persons are wholly or mainly employed in the grinding or glazing of metal,s. " (2) Nothing in this Schedule except paragraph 3 , shall apply to any grinding or glazing of metals ~arried on intermittently and at which no person IS employed for more than 12 hours in any week. . ~. Ex~pti?'»:. - The. Chief Inspector may by cer~ tiflCate m wrltmg, subJect to such conditions as he may specify, therein, relax or suspend any of the provisions of this Schedule in respect of any 'factory lAs if owing to the special methods of work or otherwise such relaxation or' suspension is practicable, without danger to the health or safety of the persons em­ ployed. SCHEDULE VI Manufacture and treatment of lead and certain compounds of lead 1. Application. - This Schedule shall apply to all factories or parts of factories in which any of the folowing operations are carried on:- (a) work at a furnace where the reduction or treatment of zinc or lead ores is carried ori; (b) the manipulation, treatment or reduction of ashes containing lead, the desilvering of lead or the melting of scrap lead or zinc;, (c) the manufacture of solder or alloys contain­ ing more than ten per cent of lead; , (d) the manufacture of any oxide, ca,bonate, sulphate, chromate, acetate, nitrate ,or silicate, of lead; (e) the handling or mixing of lead tetra-ethyl; (f) any other operation involvirig the use of a lead compound; and (g) the cleaning of workrooms where any of the operations aforesaid are carried on. 2. D~finitions. - For the purposes of this Sche­ dule- ' ,(a) "lead compound" means any compound of lead other than galena which, when treated in the mantier described below, yields to an aqueous solution of hydrochloric acid, a quantity of soluble lead compound exceeding, when calculated as lead monoxide, five per cent 'of the "dry weight" of the portion taken for analysis. In the case of paints and similar products and other mixtures contain­ ing oil or fat "dry weight"means the dry weight of the material remaining after the substance has been thoroughly mixed and treated 'with suitable solvents to remove oil, fats, varnish or other media. The method of treatment shall be as follows:- A weighed quantity of the material which has been dried at 100"C and thoroughly mixed shall be continuously shaken for one hour, at the com­ mon temperature with 1,000 times its weight of an aqueous solution of hydrochloric acid contain­ ing 0.25 per cent by weight of hydrogen chloride. This' solution shall thereafter be allowed to stand for one hour and then filtered. The lead' salt contained in the clear fiIterate shall, thEm be ,precipitated as lead sulphide and weighed as lead sulphate; (b) "efficieIlteX11aust draught" means localised ventilation affecte,d by heat or mechanical means, for the removal of gas, vapour, dust or fumes so as to prevent t)1em (as far as practicable under the atmospheric conditions usually prevailing) from escaping into the air of any place in which work is ,carried on. No draught shall be deemed SERIES I No.5 efficient which fails to remove smoke generated at the point where such gas, vapour, fumes or dust originate;, 3. Prohibition relating to women and young persons. - No women or young person shall be em­ ployed or permitted to work in any of the operations specified in paragraph 1. 4. Requirements to be observed. - No person shall be employed or permitted to work. in any process' involving the uSe of lead compounds if the process is such that dust or fumes from a lead compound is produced therein, or the persons employed therein are liable to be' splashed with any lead compound in the course of their employment unless the provisions of paragraphs 5 to '13 are complied with. 5. Exhaust draught. -'-- Where dust, fume, gas or vapour is produced In the process, provision shall be made for removing them by means of an efficient ,exhaust draught so contrived as to operate on the dust, fume, gas or vapour as closely as possible to the point of origin. 6. Food, drinks, etc. prohibited in workroom.­ No food, drink, pan and supari or tobacco shall be brought trito or consumed by any worker in any workroom in which the process is carried on and no person shaH remain in any such room during inter­ vals for meals or rest., 7. Protective clothing. - Suitable protective overalls arid head coverings shall be provided, maintained and kept clean by the occupier and such overalls' and head coverings shall be worn by 'the persons employed. S. Cleanliness of workrooms, tools, etc. - The rooms in which the persons are employed and all tools and apparatus ,used by them shall be kept in a clean state. 9. Washing facilities. - (1) The occupier shall provide and maintain for the use of all persons employed suitable washing facilities consisting of: (a) a trough with a smooth impervious surfaCe fitted with a waste pipe without plug and of suffi­ Cient le)1gth to allow at least 60 centimetres for every ten persons 'employed at any'one time, and having a constant supply of clean \Vater from taps of jets above the trough at intervals of not more than 60 centimetres; or (b) at least one wash-basin for every ten per­ sons employed at anyone time, fitted with a waste pipe and plug and having a constant supply of clean water; together with, in either case, a sufficient supply of nail bruShes, soap or other suitable cleansing material and clean towels. (2) The facilities so provided shall be placed under the charge of a responsible person and shall be kept clean. 10. Mes,sroom or canteen. - The occupier shall provide and maintain for the use of the persons employed suitable ,and adequate arrangements for taking meals. ,The arrangements shall consist of t4e use of a room separate from any workroom which I I 3RD MAY, 1985 (VAISAKA 13, 1907) shall be furnished with sufficient tables and ban­ ches and unless a canteen serving hot meals is pro­ videdadequate means of warming the foo~.The room'shall be adequately ventilated by the Circula­ tion of fresh air, shall be placed under the charge of a responsible person and shall be kept c1?an. 11. Cloakroom. - The occupier shall provide and maintaiI) for the use of persons einploye~, suitable accommodation for Clothing not worn dunng work­ ing hours, and for the drying of wet clothes. 12. Certificate of fitness. - A person medically examined under paragraph 13 ~d found fit for emploYment shall be granted by the Certifying Surgeon a certificate of fitness in Form 28 and such certificate shall be in the custody of the manager of the. factory. The certificate sh.all be kept readily 'available for inspection by. any Inspector ~d the person granted such a certificate shall carry with, him, while at work, a token givirlg reference to such certificate. . 13. Medical examination. - (ljThe person so em­ fjloyeilshall be medically exa~ine.d by the Certifyu;g Surgeon within 14 days of hIS fIrst emplo~ent m such process and thereafter he shall be exammed by the Certifying" Surgeon at intervals of not more than 3 months, and a record of such examination shall be entered by the Certifying Surgeon in the special' certificate of fitness, granted ,under. para­ graph 12. (2) . If at any time the Certifying Surgeon is of opinion that any' person is no longer fit for employ­ ment on the grounds thatcontinuancetherein would involve special danger to his health, he shall cancel the special certificate of fitness of that person. (3) No person whose spedal certific~te of fItness has been .cancelled shall be employed unless the Cer­ tifYing Surgeon, after re'exarnination, again certi­ fies him to be. fit for emJ:lloyme~t, 14. Exemption. - Where the 'chief Inspector is satisfied that all or any of the 1'rollisions of this Sehedule are not necessary for the prote,ctipn of the persons emplPyed, he may. by . certificate, in writin,g exempt. any factory from ~l~ or any of sp.cll. pr,?vl­ sions, . .subject to, such; condItIons as he. may specify. SCHEDULE VU Generating ,petrol, gas from petrol . 1. p:rohibition relating to women and young per-800s. - No woman or young person shall be einployed or permitted to work in or shall be· ~llowedto,enter any building in which the generatIOn of gas from <iangerous petroleum as defined in c!ause (~) of Sec­ tion 2 of. the Petroleum Act, 1934, IS' carrIed on. .. 2. Flame traps.'''''"' Thepliuit for generation of gas from>.dangerous petroleum. and associated ~i~ing and fittingssha~'befittedWlth at least two effICIent flame traps so designed and maintained asto pre­ yent a flash back from any burner to the' plat;lt, One of these traps shall be fitted .as close to theplarit as possible. The plant and. all pipes and valyes. shall be instaIledand maintained free· from leaks. . . , ~ " " -', 3. . Generating lfuflf?,ingor roDin . ....: All pla,nts for g€lneration of gas from .,dangerou,s. petroleum ,e~ected 149 after the coming .into force. of the provision~ speci­ fied in this, schedule, shall be erected outSIde the factory building proper in: a separate well ventila~ed building (hereinafter referred to as the "generatmg building") : In the case of such pl~~s erected. ~efo:e the comina into. force of the provIsIons specified m this Schedule, there: shall be ·no direct communica­ tion between the room where ,sUcll,J?,Iantsa,re. erec~ed (hereinafi~r', r.~.feljr,ed, t'? as tll,~ :~ge~er1l-tii1g roon!") and the remaInder of the factory. building,1)() ll}r as practicable; all shch gen~ratingroonis shaH be cons­ tructed of fire-resisting inaterials. Provided' that 'wIiE,:re th~ Gd;;ernment' is satisfied in respect of any factory that the plant for g?nera.t­ ing, of gas from ,dangerous petroleum as defmed m clause (b) ·of.Section 20f the. Petroleum Act, 1934, is 011 account .of the special precautionS; adopted or contrivances. used for such plant,. not likely to expose any persons: employed in suchfalltory to any seriou.s risk of bodily injury, the Government may,. by not!: ficationon the Official Gazette; exempt such factory whoIly or partially from the' provisions of this clause for SUch period and on such conditions as it may. specify.",'" . 4. Fi,.eextingl'~(,Gr;.- An 'efficient m~ans of extinguishing petrol fires shall be malntained in an easily accessible position near 'the'plant for genera­ tion of. gas from dangerous petrole~m. " . 'f' "J-; . 5. Plant' id:,be approved by :'Chie! In8pector.­ Petrol gas, shall' not be manufactured except in a plant',for generating. petrol gas;rtbe::design' and cons­ truction of which has been approved by the Chief Inspector. '. 6. E8c:pe a/petrol. -,Effehtivesteps shall be taket:t to prevent petrolfrom escaping into any drain ! ,}i i ' . or sewer. . 7.Prohibifwn relatin(jto 8tn'()1cing,~ No person shall smoke or carry matches, fire' or rtaked Jightor other means of producing a naked light or spark in the generation room or buildingor;in' the vicinity theI;O()fanq a:warning notice \n,the.Ian'guage under­ stood by the majority of the workers shall be posted in the factory prohibiting smoking and the carrying of matches, .,Jire, or,. naked light. or. other means of pro:ducing'anaked light or spark 'into: such room or building. . . -" . , ;;, ", ~', ' : >, ',:,;,1::-;" -. - 'S:-Acces$ to petrol or cont~i'!!fr'l7N() .unautho­ risedperso~ shaU'llave ,ac~esst(),a,ny pe~ol or . .tq a vessel contamingor havlI;1g actually .\!ot;ltame<i pe,trol. , -, ' , ~": ~ - . . , , ' , ,,- , . , 9. Electric Jittin{1S. -'-All el~6trHfittings sl;lall be of. flameproof cOnstruction a,ngi ¥Lele,qtric con­ ductd'rs shaIl either' be erlclosed iIL):1l.etal coMuits or be 'lead:ishea···the· d. .' . i " , .;ri-:d" 10. Constr:uctio,n.ot doors. _ All doors in'ithege­ nerating room or buil<iil}g shall ~ ,~onstMlcted to open outwards oi-Ctosfide)l,nd no <iopl(,l!h<!1l:p~locked or obstructed 'oi' fasteneifin such):.maiinerthat it cannot, b&easily andimriiediatel),. O~~I1~d from. the inside while"gas is 'being generat~d and any person is working in the generating room 'or bUilding .. ,_ " ' "_': " " ".>, ("",~ ;< ,-~c . '.' ' ; 11 .. Repdir bfcontiii,,!e,s. - No .' vessel tilat has contained petrol shallbe'repaire:d in.a generating roomor.btiildingand no repairs'to irny such vessel "~"''''-''''''---~------- .. -~.--. ------ 150 shall be undertaken unless live steam has been blown into the vessel and until the interior is· thoroughly steamed out or other equally effective steps have been taken to ensure that it has been rendered free from petrol or inflammable vapour. SCHEDULE VITI Cleaning or smoothing, roughening, etc, of articles, by a jet of sand, met& shot, or .grit, or other abraSive propelled by a blast of compressed . air or steam 1. Definitions. - For the purposes of this Sche­ dule- (a) "blasting" means cleaning, smoothing, roughning or removing of any part of the surface of any article by' the use as an abrasive of a jet of sand, metal shot or grit or other material, propelled by a blast of compressed air or steam; (b) "blasting enclosure" means a chamber, barrel,cabinet or any other enclosure designed for the performance of blasting therein. (c) "blasting chamber" means a blasting en­ closure in which any person may enter at any time in connection with any work or. otherwise; and (d) "cleaning of castings" where done as an incidental or supplemental process in connection with the' making of metal castings, means the freeing of the casting from adherent sand or other substance and includes the removel of cores and the general smoothening of a casting, but does not include free treatment. 2. Prohibition oj sand blasting. - Sand or any other substance containing free silica shall not be introduced as an abrasive into 'any blasting appara­ tus and shall not be used for blasting: Provided that this clause shall come into force two years after the coming into operation of these rules: . Provided further that no woman or young person shall be employed or permitted to work at any ope­ ration of sand blasting. 3. Precautions in connection with blasting opera­ tions. --. (i) Blasting to be done in blasting encloc sure- Blasting shall not be done except in a blasting enclosure and. no work other than blasting and any work immediately incidental thereto and clearing and repairing of the enclosure including the plant and appliances situated therein, shall be performed' in a blasting enclosure. Every door ap~rture and joint of blasting. enclosure shall m; kept closed and airtight while blasting is being done therein. (ii) Maintenance of blasting enclosure- Blastingendosure' shall always be maintained ingoodcondition and effective measures shall be taken, to p;reyent dust escaping from suchenclo­ sure, and from,apparatus connected therewith, into the air. of, any 1'Ol>m. (iii) Provision of separating apparatus- There shall be.providedand maintained for and in connection witl;tevery blasting enclosure, effi- SERIES. I No.5 cient apparatus for separating, so far as practi­ cable, abrasive which has been used for blasting and which is to be used again as an abrasive, from dust or particles of other materials arising from blasting; and no such abrasive shall be in­ troduced into any blasting apparatus and used for blasting until it has been so separated. Separating apparatus shall be provided with exhaust draught arrangement· to extract and re­ move the dust by speciai methods and in such manner so that it shall not escape into air of any ro()ms in which persons are employed: Provided thatthis clause'shall not supply, except in the case of blasting chambers, to blasting enclosures constructed or installed before the coming into force of this Schedule, if the Chief Inspector is of opinion that it is not reasonably practicable to pro­ vide such separating apparatus. (iv) Provision of ventilating plant- There shall be provided and maintained in con­ nection with every blasting enclosure efficient ventilating plant to extract, by exhaust dranght effected by mechanical means, dust produced in the enclosure. The dust extracted and removed shall be disposed of by such method and in such manner that it shall not escape into the air of any room; and every other filtering or settling device situated in a room in which persons are employed, other than persons attending to such bag or other filtering or settling device, shall be completely se­ parated from the' general air of that room in a enclosure ventilated to the open air. . (v) Operation of ventilating plant- The ventilating plant· provided for the . purpose of sub-paragraph. (4) shall be kept in continuous operation whenever the blasting: enclosure is in use whethe.r or. ~t blasting is actually taking place. therelIT, a!ld lIT the case of a blasting cham­ !>cr:, I~ shall be lIT operation even when any person IS mSIde the chamber for the purpose of cleaning. . 4. Inspection and examination. - (1) Every blast­ lITgenclosure shall be specially inspected by a com­ pet~nt person at le~t once in every week in which It IS used for blasting. Every blasting enclosure, ~e apparatus connected therewith and the ventilat­ mg plant shall be thoroughly examined and in the case of ventilating :plant, tested by a competent person at least once lIT every three months.' (2) Particulars of the result of every such ins­ pection, . examination or test shall forthwith be entered in a register which shall be kept in a form approved by the Chief Inspector and shall be avai­ labl.e for ins~ectio~ by' any workman employed in' or lIT connection Wlth blasting in the factory. Any defect found on any such inspection, examination or t~t shall be in.unedia~ely reported by the person carryIng out the Inspection, examination or test to the oc~upier, man~ge~ or other appropriate person and WlthOunt preJudIce to the foregoing requlre­ mentsof this Schedule, shall be removed without avoidable delay. (3) Every blasting Chamber, separating appara­ tus, and ven~ating plant shall be thoroughly lns­ pected ~t an.mte~a! of 6 month!;! for detecting any defect. lIT theIr effICIent .operations, and the defects . so notIced shall be rectified forthwith. 3RD MAY, 1985 (VAISAKA 13, 1907) 5. provWion of proteotive helmeta, gauntleta and overalls. ,- (1) There shall be provided and main­ tained for the use of all persons who are employed in a blasting chamber, whether in blasting or in any work connected therewith or in cleaning· such a chamber, protective helmets of a type' approrved by a certificate of the Chief Inspector; and every such person shall wear the helmet provided for this use whilst he is in the chamber and shall not remove it until he is outside the chamber. . (2) Each protective helmet shall carry a distin­ guishing mark indicating the person by whom it is intended .to be used and no person shall be allowed or required to wear a helmet not carrying his mark or a helmet which has been worn by another person and has not since been thoroughly disinfected. (3) Each protective helmet when. in use shall be supplied with clean and not 'unreasonably cold air at a rate of not less than 170 litres per minute. (4) Suitable gauntlets, overalls, dUst-proof goggles and boots shall be provided for the use of all persons. while performing blaSting or assisting' at blasting and every such person shall while so engaged, wear the gauntlets, overalls, dust-proof goggless and boots so provided. (6). Precautions inoonneotion' with oleaning and other work. - (1) Where any person is engaged upon cleaning of any blasting apparatus or blasting enclosure or of any apparatus or ventilating plant connected therewith or the surroundings thereof or upon any' other work in connection with any blast­ ing apparatus or blasting enclosure or. with any apparatus or ventilating plant connected ,therewith so that· he is exposed to the risk of inhaling dust which has arisen from blasting, all practicable' mea- . sure shall be taken to prevent such inhalation. (2) In connection with any cleaning. operation' referred to in paragraph 5, and with the removal Clf dust from filtering or settling devices all practi. cable measures shall be taken to dispose of the dust in such a manner that it dOes not enter the air of any room. Vacuum cleaners shall be provided and used wherever practicable for such cleaning. opera- tions. . ,';. Storage accommodation jor proteotive wear.­ Adequate and suitable. storage accommodation for the helmets, gauntlets· and overalls required to be provided by paragraph 5 shall be provided outside and conveniently near to every blasting enclosure and such accommodation shall be kept clean. Hel­ mets, gauntlets andoveralIs when not in actual use shall be kept in this accommodation .. 8. Maintenance and oleaning of prClteotive wear. - Ail helmets, gauntlets, overalls and other pro­ tective devices or, clothing provided and worn for the purposes of this. schedule, shall be kept in good con­ dition and so far as is reasonably practicable shall be' cleaned on every . weekday in which they are used. Where dust arising from the cleaning of such protective clothing or devices is likely to be inhaled, all practicable measures shall be taken to prevent SUch inhalation.' Vacuum clea.Iiers shall, . wherever PI'!lciicable, be used· for removing dust from such clothmg and compressed air shall not be used for removing dust from any clothing. 151 9. Maintenance of vacuum cleaning plant.~Vacuum cleaning plant used for the .purpose of this Schedule shall be properly maintained. 10. R.eatricti0n8 in employment of young per80n8. _ No woman or young person under 18 years of age shall be employed in blasting or assisting at blasting or in any 'blasting chamber orin the. clean­ ing of any blasting apparatus' or any blasting enclo,­ sure or any apparatus or ventilating plant connected therewith or be employed on maintenance or repair work at such apparatus, enclosure.or plant. (2) No woman or. young person under 18 years of age shall be employed to work regularly within twenty feet of any blasting encl~ure unless· the enclosure is in a .room and he, is outside that room where he is effectively separated from any 'dust coming from the enclosure. 11. Medical examinatiOn; - (1) .Every person em­ ployed in blasting or assisting at blasting or in any blasting chamber or in the cleaning of any blasting apparatus or any blasting enclosure or any appa­ ratUll or ventilating plant 'conneCted therewith or be employed on maintenance or repair work at such apparatus, enclClsure . or plant, shall. be medically examined by the Certifying Surgeollwithin thirty­ days of his first en1ploynient, the .. record of which shall be entered in Form No. 7,and if found.fit for employmentin the said process, he shall be granted by theGertifying Surgeon, a certificate of fitness in Form No. 28. . (2) After the first examination, the person so examined shall be examined by the. Certifying Sur­ geOn at interVals of twelve months and a record of such examinations. shall be entered by the Certify­ ing Surgeon in Form No.7. (3) If at any time the Certifying Surgeon is of the opinion that the person employed in'the said process shall be examined radiologically by. a quali­ fied radiolOgist, he may direct the occupier to arrange for such examination at his cost and th.eri. to submit the . standard size chest X-Ray plate of the work!lr to the Certifying Surgeon. . (4) If at any time the Certifying . Surgeon is of the opinion that any Ilerson is no longer fit for.em­ ployment on the grounds that continuance therein would .involve special danger to health, he shall cancel. the speCial certificate of fitness inForm NO.,28 of that person and record inForm ·No. 7.. , . (5) No person whose sPeCial cefUficate of fitness in Form No. 28 has been cancelled, shan be emplqyed or permitted to work unless the Certifying Surgeon, after re-examination, again certifies him to be fit 'for emIllqyment in the operations. (6) The register of the special certificates in Form No. 28 granted by the Certifying Surgeon and the record made in Form No.7 by him shall be in the custody of the manager of the factory . and shall be kept readily available for~peetion by .an Inspector. . '. .. . 12. Power to exempt or. relax. - If the, Chief Ins­ pector is satisfied that in any facj;Qry or any class of factory, the use of sand or other substance con­ taining free silica as an abrasivem blasting is necessary for a Jlarticularmannfactureor process 152 (other', than the process incidental or supplemental to making of metal castings) and that the manufac­ ture' or process cannot be carried on without the use of such abrasive or that owing to the special conditions or special method of work or otherwise 'any requirement of this Schedule can be suspended either' temporarily or' perritanently, or can be relaxed without endangering the health of the perSons employed or that application of any such requirements is for any reason impracticable or inappropriate, he may, with the previous sanction of the State Goverrunent, by an order in writing exempt, the, said factory or class of factory from such provisions of this Schedule, to such an extent and subject to such conditions and for such period as' may be specified in the ,said order. ,(2) Where an exemption has been granted under sub-paragraph (1), a copy of the order shall be displayed at a notice board at a prominent place at the main entrance or entrances to the factory and also at the place where the bIa:sting is carried on. SCHEDULE IX Liming aJld taDning of raw hides and skins and, , , " prooosses' incidental thereto 1. Cautionary notices. - (1) Cautionary notices as to antljrax in, the form specified by the Chief Ins­ pectorshall be affixed in prominent positio~ in the factory where they may be easily and conyeniently read by the persons employed. (2)' A 'copy of a warning notice as to anthrax in the form specified by the,Chief Inspector sha,ll be given to 'each person employed:when he IS engaged, and subsequently if still employed, on the first day of each calendar year. " (3), CaUtionary notices asta the effects, of chrome on the skin shall be affixed in prominent positions in every factory in which chrome solutions are used and such ,notices shall, be so placed as to be easily and conveniently read by the persons employed. (4) Notices shall be affixed in prominent places in the factory stating the position of the first-aid box or c,upboard and the name of the person in charge of such box or cupboard. (5) If any person employed in the factory is illi­ terate, effective steps shall 'be taken to explain carefully to such illiterate persoI1 the contents of the notice specified in sub-paragraphs (1), (2) and (4) and if chrome sojutionsare used in the factory, the' 'contents of the' notice specified in sub-para­ graph (3) • , 2. Protective cZOthing. - The occupier shall pro­ vide and 'maintain, in good condition the following art;icl.es,ef .protective clothing- , (a)'yjaterprooJ;fOQtwear leg coverings, aprons apd 'gloves f(jr persolls employed in processes in­ v6Ivihg contact with chrome solutions, including the preparation of such solutions; , (b)"gloves and boots for persons employed in lime yard; 'ahd " , I': : .' j",,:::, ',_ -' _l . ,,(e) ,protective footwear, aprons and gloves for , persons .employed in processes involving the handl' SERIES I No.5 ing of hides' or skin\" other, than in processes, specified ,in sub-paragraphs (a) and (b): Provided that the gloves aprons, leg coverings or boots may be of rubber, 'or leather, but the gloves and boots to be provided under sub-paragraphs (a) and (b) shall be of rubber: Provided further that the gloves may not be pro­ vided to persons fleshing by hand or employed in processes in which there is no risk of cont.act with lime, sodium SUlphide or other caustic liquor. 3 . Washing /acUities, me8SToom aiJ,d cloakroom. - There shall be provided arid maintained in a clean state and in good repair for the use of all persons employed- ' , (a) a trough with a smooth impervious surface fitted with a waste pipe without plug, and' of sufficient length to allow of at least 60 centimetres for every ten persons employed at anyone time, imd having a constant supply of water from taps or jets above the trough at intervals ,of not m,ore than 60 centimetres; or at least one wash b8.sin for every ten such persons employed at anyone time, fitted with a waste pipe and plug and having a constant supply of water; together with, in either case, a sufficient supply of, nail ,brushes, soap or other suitable cleansing material and clean towels; (b) ,a suitable messroom, adequate for the number remaining on the preritises during the meal iritervals,which shall be fu:inish~d with suffi­ cienttables and benches and adequate means for warming food and for boiliugwater. The mess­ room shall-:- (i) be separate from any room or shed in which hides or skins are stored, treated or mani- pulated; , ,(ii) be separate from the cloakroom; and '(iii) pe placed utider the charge of it respon­ sible person; and (c) suitable accommodation for clothing put off during working hours and another accommoda­ tion for protective clothing and also adequate arrangements for drying up the clothing in i)Qth the cases,"if wet. The accommodation so provided shall be kept clean at all times and placed under the charge of a responsible person. ' 4. Food,' drinks, etc. prohibited in workrooms.­ No food, drinks, pan and supari or tobacco shall be brought into or consumed by any worker in work­ room or shed in which hides or skins aI'\'! stored, treated ormauipulated. " 5. First-aid arrangements. - The occupier shall- , , (a) arrange for an, inspection of the hands of all persons coming into contact with chromesolu­ tionhl be made twice a weekby'a reSponsible person; and ' (b) provide and maintain a sufficient supply of suitable oiritment and, iInperme!l.ble Waterproof plaster in' '8,', box readily accessible to , the, worker a~d used sOlely for the purpose, of . keeping the omtment and plaster. ' 3RD MAY, 1985 (VAISAKA 13,1907) SCHEDULE X Printing Presses and Type Foundaries and certa.iD . lead processes carried therein 1. Definitions. - For the purposes of this Sche- dule-:- . (a) "lead material" means material containing not less than five ,P6r cent of lead; (b) "Lead process"means- (i) the melting of lead or any lead inaterial for casting and mechanical composing; (ti) the recharging of machines with used lead material; (iii) any other work including removal' of dross from melting pots and cleaning of plungers; and (iv) manipulation, movement or other treat­ ment of lead materiaL ,(c) "efficient exhaust draught" means localised ventilation effected by heat or mechanical means, for the removal of gas, vapour, dust or fumes so as to prevent them from escaping into the air of any place in which work is carried on. No draught shall be deemed efficient which fails to remove gas, vapour, fume or dust at the point where they originate. 2. Exhaust draught. -. (1) None of the following processes shall be carried on except with an' efficient exhaust draught unless carried on in such a manner as to prevent free escape' of gas, vapour, fuines or dust into any place in which work is carried on, or unless carried on in electrically heated and thermos­ taticallycontrolled melting .pots: - '(a) melting lead material or slugs; and (b) heating lead material so that vapour con- taining lead is given off. . (2) Such exhaust draught shall be effected by mechanical means and so contrived as to operate on the dust, fume, gas or vapour given off as closely as may be at its point of origin. 31. Prohibition relating to women and young per- 8.tms. - No woman or person below 18 years of. age shall be employed or permitted to work in any lead process. 4. Separation of certain processes. - Each oithe follo.wing processes shall be carried on in such a manner and under such· conditions as to secure effectual separation from one another ahd from any other, processes:,- (a) melting of lead or.any lead material; (b) casting of lead ingots; and (c) mechanical cOmposing. 5; Oontainer jor dross. - A suitable receptacle with tight fitting cover shall be provided and used for dross as it is removed'from every melting pot. Such receptacle shall be kept covered while in the workroom' near, the. machine, except when the. dross is beilig dep6Sitedtherein. '. '. . 153 6. Floor of workroom. - The floor of every work­ room where lead process is, carried on shall be- (a) of cement or similar material so as to be smooth and impervious to water; (b) maintained in soundcoJ;ldition; and . (c) shall be' cleansed throughout daily after being thoroughly damped with water at a time when no other work is being carried on at the place. 7. Mes8Toom. -'There shall be provided and main­ tained for the use of all persons employed in a lead process and remaining on the premises during the meal intervals, a suitable messroo:in which shall be furnished with sufficient tables and benches. 8. Washing facilities. - There shall be provided and maintained in a clean state and in good repair for the use of all persons employed in a lead process- (a) a wash place with either~ (i) a' trough with a' smooth impervious surface fitted with a waste pipe without plug, and of sufficient length to allow at least 60 cen­ timetres for every five such persons employed at anyone time and haVing a constant supply of water from taps or jets above the trough at intervals of not more than 60 centimetres; or (ii) at least one ",ash basin for every five such persons employed at anyone .time fitted wits a waste pipe and plug and having an ade­ quate supply of· water laid on or always readily available; and (b) a sufficient supply of clean towels. made of suitable material, renewed dilly with a sufficient supply of soap or other suitable cleansing material. 9. Food, drinks, etc. prohibited in workrooms.­ No food, drink, pan and suparior tobacco shall be consumed or brought by any worker into any work­ ,oom in which any lead process is carried on. 10. Medical examination. - (1) Every person em­ ployed in a lead process shall be examined by the Certifying Surgeon within 14 days of his first em­ ployment in such processes and thereafter shall be examined by the Certifying Surgeon at intervals of, not nwre than. 3 months, and " a record of such examinations shall be entered by the Certifying Surgeon in the special certificate of fitness' in Form 28. (2) A health register containi~g names of all per­ sons employed in any lead process .shall be kept in Form 7. . (3) No person after suspension .shall be employed in a lead process without the written sanction from the Certifying. Surgeon entered in the health re­ gister. 11. Exemption, - Where the Chief Inspector is satisfied that all or any of the proVisions of this Schedule are not necessary for the'protectionof p,er­ sons employed, he may by certificate in writing exempt any factory from all or any of such pro­ visions subject to such conditions as he may specify therein .. Such certificate may at any time. be re­ voked by the Chief Inspector. ~- .... ~ ... - -------- --. 154 SCHEDULE XI Manufacture of potrery 1. Savings. - These provisions shall. not 8:pply to a factory in which any of the followmg articles, but no other pottery are made: - ' (a:) unglazed or, salt glazed bricks and tiles; and (b) architectnral terra-cotta made from plastic clay and either unglazed or glazed with a leadless glaze only. 2. Definitions. - For the purposes of this Sche­ dule- (a) "pottery" includes earthenware, stoneware, porcelain, china tiles, and any other articles made from such clay 9r from a mixture containing clay and other materials such as quartz, flint, feldspar and gypsum; (b) "efficient exhaust draught" means localised ventilation effected by mechanical or other means for removal of dust or fume so as to prevent it from escaping into air of anyplace in which work is carried on. No draught shall be deemed effi­ cient which, fails to remove effectively dust or fume generated at the point where dust or fume originates; (c) "fettling"" includes scalloping, towing, sand papering, sand sticking, brushing or any other process of cleaning of potteryware in which dust is given off; (d) "leadless glaze" means a glaze which does not contain more than one per cent of its dry weight, of a lead compound calculated as lead monoxide; . '(e) "low solubility' glaze" means a glaze which does not yield to dilute hydrochloric acid more than five per cent of its dry weight, of a soluble lead. compound calculated as lead monoxide when deternined in the manner described below: .A weighed quantity of the material which has been dried at 100 degrees centigrade and thoroughly mixed shall' be continuously shaken for one hour at the common temperature with 1000 times its weight of an aqueous solution of hydrochloric acid containing 0.25 per cent by weight of hydrogen chloride. This solution shall thereafter be allowed to stand for one hour 'and then filtered. The lead salt contained in the clear filterate shall then be preci­ pitated as lead sulphide and weighed as lead sulp­ hate; (f) "ground or powdered flint or quartz"does not include natural sands; and , ' (g) "potter's shop" includes all places where pottery is formed by pressing or by any other process and all places where shaping, fettling or other treahnent, of pottery articles prior to pla­ cing for the biscuit fire is carried on. 3. Efficient exhaust draught. - The following processes shall not" be carried on without the use of an efficient exhaUst draught:,~ (a) all processes inVOlving the manipulation or use of a dry and unfritted leaq compound; SERIES I No. 5 (b) fettling operations of any kind, whether on greenware or biscuit, provided that this shall not apply to the wet fettling and to the occasional fini­ shing of pottery articles without the aid of me­ chanical power; (c) Shifting of clay dust as any other material for making tiles or other articles by pressure, except where- (i) this is'done in a machine so enclosed as to effectually prevent the escape of dust; or (ii) the material to be shifted is so damp that no dust can be given off; (d) pressing of tiles from clay dust, an exhaust opening being connected with, each press, and pressing from clay dust of articles other than tiles, unless the material' is so damp that no dust is given off; (e) fettling of tiles made from clay dust by pressure, except where the fettling is done wholly on, or with" damp material, and fettling of other articles made from clay dust, unless the material is so damp that no dust is given off; (f) process, of loading and unloading of saggars where handling and manipulation of ground pow­ ,dered flint, quartz, aluminia or other materials are involved; , (g) brushing of earthenware biscuit, unless the process is carried on in a room provided with efficient general mechanical ventilation or other ventilation which is, certified by the Inspector' of Factories as adequate having regard to all the 'circumstances of the case;, , (h) fettling of biscuitware which has been fixed in powdered flint or quartz except where this is done in machines so', enclosed as to effectually prevent the escape of dust; , (i) where cleaning after the application of glaze is doneby dipping or other process; (j) crushing and dry grinding of mateljals for pottery bodies and saggars, unless carried on in machines so enclosed as to effectively prevent the escape of'. dust or is so damp that no dust can be given off; (k) sieving or manipulation of powdered flint, quartz, clay grog or mixture of these materials unless it is so damp that no dust can be given off; (I) grinding of tiles on a power driven wheel unless an efficient water spray is used on the wheel; (m) lifting and conveying ,of materials by elevators and conveyers unless they are effectively enclosed and so arranged as to pre,{ent escape of dust into the air in or near to any place in which persons are. employed; (n) preparation or weighing out of low material, lawning of dry colours, colour dusting and colour blowing; (0) mould making unless the bins· or similar receptacles used for holding plaster of paris are' provided with snitable covers; and. . (p) manipulation of calcined material unless the material has been made .and remains so wet that no dust is given off. ' ~~p .MAY, 198~ (VAISAKA 13, 1907) 4. Separation oj processes.~ Each of the following processes shall be carned on in such a manner, and under such conditions as to secure effectualsepara­ tion . from one another, and from other wet pro­ cesses:- (a) crushing and dry grinding. or sieving of materials, fettling, pressing of tiles, drying of !)lay and greenware, loading and unloading of saggars; and (b) all processes involving the use of a 'dry lead compound. 5. Prohibition on u,se of glaze. - No glaze which is not a leadless glaze or a low solubility glaze shall be used in a factory in which pottery is manu­ factured. 6. Prohibition relating to women andyo'ung per­ sons. - No women or person below l8 years shall be employed or permitted to work in any of the operations specified in paragraph 4, or at any place where such operations are catried on. 7. Provision of screen to potter's wheel. - The potter's wheel (Jolly and Jigger) shall be provided . with screens or so constructed as to prevent clay scrapings being thrown off beyond the wheel. . 8. Control of dust during cleaning. - (i) All prac­ tical measures shall be taken by damping or other­ wise to prevent dust arising during cleaning' of floors. . (2) Damp saw-dust or other suitable materials shall' be used to render the moist methOd effective in preventing dust rising into the air during the cleaning process which shall be carned out after work has ceased. 9. Floor oj certain workrooms. - The floors of potter'ssho)?s slip houses, dipping houses and ware cleaning rooms shall be bard, smooth and impervious and shall be thoroughly cle.aned daily by an adult male using a moist methOd. . 10. Protective equipment. - (1) The occupier shall provide and maintain suitable overalls' and ~ead coverings for all persons employed. in process mcluded under paragraph 3. . (2) The occupier shall provide and maintain suit­ able aprons of a waterproof or similar material w:hich can ~ sponged daily for the use of the dippers; dippers aSSIStants, throwers, jolly workers, casters mould makers and filter press and plug mill workers. (3) Aprons provided in pursuance of paragraph 10 (2) shall bethorollghly cleaned daily by . the wearers by sponging or other wet· process. All over­ alls and head coverings shall be washed, cleaned and mended at least once' a week, and this washino­ clean~g or mending shall be provided for by th~ occupIer. . (4) No person. shall be allowed to work in empty­ mg sacks of dusty materials, weighing ou.t and mixing of dusty inaterialsand charging of ball mills and plungers without wearing a suitable and efficient dust respirator. ,. ." . 11. W asking facilitie~. ~ (1) The occupier shall provide and maintain, in a clean sta.te and in good 155 repair for, the use of all persons employed in any of the processes specified in paragraph 3 - . (a) a. wash place under cove~. with either- (i) a trough with smooth 'impervious surface fitted with' it waste pipe ",without plug, and of sufficient length to allow at least 60 centimetres for .every five such persql1S em'ployed at any one time; and having a conshlnt supply of clean water from taps or jets above the' trough at intervals of not more than .60 centimetres ; or , \.< • . (ii) at least one tap or'standpipe'for every five such persons employed'at'any one time, and having a constant supply of Clean water, the tap or stand pipe being. spaced not leilsllian120 centimetres apart; and " . (b) a. sufficient supply o(cl~ntowels made of suitable material changed daily, .with sufficient supply of nail brushes and ,soap. 12, Time allowed for washing . ."... Bofore each meal and before· the' end of the day;s work, at least ten minutes, in addition. to the regular meal times, shall be allowed for washing to. each person employed in any of, the. processes mentioned in paragraph 3. . 13'. M eS8Toom . .-: There shall be provided and maintained for use 'of all persons remaining within the premises during the rest .intervals, a suitable messroom providing accommodation' of 0.93 square metres per head and furnished with- (a) . a'sufficient number of tables and chairs. or oonches withbRck rest;' . (b) arrangements for washing utensils; (c) adequate means for warming foOd; and (d) adequate quantity of drinking, water. (2) The room shall be adequately ventilated by the circulation of fresh air and. placed under the charge of a responsible person and shall be kept clean. 14. Food, drinks, etc. prohibited in workrooms.­ .No food, drink, pan and r;;uparior tobacco shall be brought into, Or consumed by any worker in any workroom in which any of the i>rooesses mentioned in paragraph' 3 are carned on an.d no person shall remain in any such room during intervals for meals and rest. .. 15. Cloakrown, etc.-There shall be provided and maintained for the' use of all per$Ons employed' in any of the p~cesses mentioned in paragraph 3- (a) a .cloakroomfor clothing, . put . off during working hours and such accommOdation shall be separate from any,:messroom;and (b) separate alldsuitable arrangements for the storage of protective equipment' provided under paragraph 10. . . . , . 16. Medical, examination. - (1) All persons em­ ployedin ariyprocess' included under.pamgraph 3 shall be exaIiIined by the Certfyinl(,Surgeon within 7 days preceding or following the dltteof their first employme~t in sucll proc~;. thereafter all persons employed lll,anypro;cess mcluded:under sUh-Wra- .', 'v , _<. _. • • '.'''~ .,. ,_. 156 graphs 3(i) and (xiv) shall be examined by the'Cer­ tifying Surgeon once in every three calendar months, and those employed in any process included in sub­ paragraphs (ii) to (xiii) (xv) and (xvi) of para­ graph 3 once in every 12 months by the Certifying Surgeon. Records of such examinations shall be entered by the Certifying Surgeon in the health register and certificate of fitness granted to him under paragraph'17. (2) If at any time the Certifying Surgeon is of opinion that any person employed in any process included in paragraph 3 is no longer fit for employ- , ment on the ground that continuance therein would involve, danger to his health., he shall. cancel the cer­ tificate of fitness granted to that person. (3) No person whose certificate of fitness has been cancelled shall be re-employed unless the Cer­ tifying Surgeon after re-examination, again certifies him to be fit for employment. . 17. Certificate of fitness. - A person medically examined under paragraph 16 and found' fit for employment shall be granted by the Certifying Sur­ geon a certificate of fitness in Form 28 and such certificate shall be in the custody of the manager of the factory. The certificate shall be kept readily available for inspection by any Inspector and the person granted such a certificate shall carry with him wliile at work a token giving reference to such certifIcate. 18. Exempti<m. - If in respect of any factory the Chief Inspector of Factories is satisfied, that all or any of the provisions' of this Schedule are riot ne­ cessary for the protection of the persons employed in such factory, he may by a certificate in writing exempt such factory from all or any of such provi­ sions, subject to- such, conditions as he may specify therein. Such certificate may at any time be revoked . by the Chief Inspector without, assigning any reasons. SCHEDULE XII Chemical works 1. Appiioati<m. - This Schedule shall apply to all manufactures and processes incidental thereto car_ riedon in chemical works. . 2. Definitions. - For the purposes of this Sche­ dule- (a) "chemical works" means any factory or such parts of any factory as are named in appendix A to this Schedule; (b). "breathing apparatus" means (i) a helmet or facepi<~ce with necessary connections by means of which, a person using it in a poisonous, asphyxiating or, irritant atmosphere breathes ordinary air, or (ii) any other suitable apparatus approved in writing by the Chief Inspector; , (0) "lifebelt" means a belt made of leather or other suitable material which can be securely fastened round the body, with a suitable length of rope attached·to~t, each· ofwhioh 'is, sufficiently strong- to sustain the weight of a man; , (d)"ef~icieht\lxha:ustdraught" . means loca­ lised ventilation effected by fuechanical or other SERIES r No. 5 means for the removal oj' gas, vapour, fume or dust to' prevent it from escaping into the air of anyplace in which work is carried on; (e) "suspension" means suspension by written certificate in the health register, signed by the, surgeon, from: employment in any process men­ tioned in the certificate; (f) "bleaching powder" means the bleaching powder commonly called chloride of lime; (g) "chlorate" means chlorate or perchlorate; (h) "caustic" means hydroxide of potassium or sodium; - (i) "caustic pot" means a metal pot' fixed over a furnace or flue and surrounded by brickwork, such as is commonly used for concentrating caustic liquor, whether such pot be used for con­ centrating or boiling caustic or other liquor; (j) "chrome process" means the manufacture of chromate or bichromate of potassium or so­ dium, or the manipulation, movement or other treatment of these substances in connection with ·theirmanufacture ;·and (k) "nitro or amido process"means the manu­ facture of nitro or amido derivatives of phenol and of benzene or its homologues, and the making of expIollives with the use of any of these subs­ tances. PART I Applying.fA> all the workers in Appendix A A-GENERAL 3. Hausekeeping. - (1) Every part of the path­ -ways, works, machinery alid plant· shall be main­ tained in a clean and tidy condition. (2) . Any spillage of materials shall be cleaned up without?elay. (31) Floors, ,platforms, stairways, passages and gangways shall be kept free of temporary obstruc­ tions. .( 4) There shall be provided easy means. of access to all parts of the plant to facilitate cleaning maintenance and repairs thereof. . ' 4. Improper use of okemioals.- (1) No chemicals' or solvents shall be used by workers for ·any pur­ poses apart from the processes for which they are supplied. (2) Workers shall be instructed on the possible dangers arising from such misuse. These instruc­ tions shall further be displayed in bold letters in prominent places in the different sections. 5. Storage of food. - No food, drink, tobacco pan or similar article shall be stored or consumed on or near any part of the plant. 6; Testing of materials. - Workers shall be ins­ tructed o!, the possible dangers arising from the testing of materials, or of the use for ~inking pur­ poses of any vessel used in or in connection with the manufacture of chemicals. These jiJ.struction~ shall further be displayed in, bold letters in promi­ llent places in the different sections of ·the factory or, plant. ' ., 3RD MAY, 1985 (VAISAKA}3, 1907"-.) ____________________ --"1::::..:57 7. Process hazards. - (1) Before commencing any large scale experimental work, or any new ,manufacture, all possible steps shall be taken to ascertain definitely all the hazards involved both from the actual operations and the chemical reac­ tions thereunder. The properties of the raw mate­ rials used, the final products to be made, and any by-products arising during manufacture, shall be carefully studied and provisions shall be made for dealing with any hazards including effects on wor­ kers, which may arise during manufacture. Where necessary, advice shall be obtained from the Chief Inspector of factories on measures to be taken in this regard. (2) Information in writing giving details of the process, its hazards and the steps taken or proposed to be taken for the safety of workers as in (1) above shall be sent to the Chief Inspector before commenc­ ing manufacture, handling or storage of any of the .items covered under Appendix A, whether on expe­ ,rimental, pilot plant or Iarge scale basis.' (3) The design of the buHdirigs and plant shaH 'be based on the information as obtained as in, (1) ,above. ' 8. Unauthorised personnel. ~ (1) Unauthorised persons shall not be permitted to enter any section of the factory or plant where there are special dangers. (2) Visitors shall be provided, where necessary, with suitable safety equipment and shall be aC,com­ panied round dangerous plant by a responsible Official. 9. Instruments. - All instruments such as pres-' sure gauges, thermometers, flow mete~s and weigh­ ing machines shall be tested at regular intervals by a competent person and records of these tests shall 'be kept in a register. 10. Oocks and valves. - Suitable valves shall be provided in all' service lines at sufficiently short interVals for convenience in blanking off, etc. All cocks and valves shall be operated at least once a month and tested periodically by a competent person, and records of these tests Shall be kept in a register. A plan of, all service installations' shall be kept readily available for perusal. 11. Manholes. - No marihole shall be opened for entry until effective fencing has been erected around' it. ' 12. Emergency instructions. - Simple and special instructions shall be framed to ensure that effective measures will be, carried out in cases of emergency, to deal with escape of inflammable, poisonous or deleterious gases, vapours, liquids or dusts, These instructions shall further be displayed in bold letters in prominent places in the different sections. ' All workers shall be, trained and instructed as to what action to be taken in such emergencies, and to avoid general hazards of their employment. 13. Protection of reaction mixtures. - Suitable arrangements shall be made to ensure that no 'foreign matter ,of any sort can fall into reaction 'mixtures. . 14. Electrical, apparatus. - Electrical plant, fit­ 'tmgs,and conductors shall, if exposed to a damp or corrosive atmosphere, be adequately protected. Periodic tests shall be carried out on all circuits. 15. Place of work. - (1) Workers shall only be allowed in those places in which they have been given orders to work. (2) In dangerous sections of a factory, the num­ ber of workers shall be kept to a minimum compati­ ble with the need of the process. 16. Packing, storage and transport of chemicals.­ Chemicals shall be packed and stored in containers, suitable for the purpose and of adequate strength for storage or transport. All such containers shall be suitably labelled so that they will be stored and transported in such a manner as to, ensure that, in the event of spillage, they will neither produce a reacting mixture, nor cause the development of toxic or fire risks in contact with other products in its vicinity, or with walls, floors or dust thereon, . B-,- FIRE EXPLOSION RISKS 17. Requirement regarding location of site, build­ ings,etc. -'- (1) Buildings and, plant shall be sited with due -regard to' the dangers which may arise from the processes involved and in partic1,llar shall be spaced at distances which are deemed safe from the fire and explosive risks connected with the processes in adjacent buildings. Due consideration shall be given to the effect of any processes carried out in adjacent factories. (2) 'Where special dangers exist, separate build­ ings shall be used for the different parts of a pro­ cess. They shall, be spaced at sufficient distances apart and shielded to prevent damage to each other in the, event of fire or explosion, and shall be safe­ guarded by the provision of suitable blow-out panels or roofs. Where' the risk of f;re' or explosion is considerable, the building shall be divided by blast or protective screen walls. (3) No combustible materials, shall be used in the erection of working buildings, unless there are spe­ cial reasons necessitating their use; when they shall be rendered fire-resistant. 'The ,oof shall be of light fire-resistant construction and floors shall be of impervious fire-resistant material and shall be regu­ larly maintained in such condition. 18. Dangers of ignition (inGZudinglighting ins~ tallations): - (1 ) No internal combustion engine and no electric motor or ,other electrical equipment, and fittings and fixtures capable of 'generating sparks or otherwise causing combustion 'shall be installed or used in a building or danger zone. Electrical con­ ductors shall be fitted with screWed steel conduits. (2) All hot exhaust pipes sh.allbe' installed outside a building and other hot pipes shall be suitably protected. , ' , , (3) Portable electric hand, lamps ,shall not be used unless of an intrinsically safe' type, and portable electric tools connected by flexible Wires shall not be used, unless of th,e flame-proof type. (4) Where an iuflammable atmosphere may occur, the soles of footwear worn by workers ,shall have no metal on them and the wheels of trucks or con­ veyors shall be' of conducting,' non-sparking mate­ rials. Adequate precautions shall be taken to pre- 158 vent the ignition of explosive or inflammable subs­ tances by sparks emitted from locomotives or other vehicles operated in the factory on public lines. (5) No electric arc lamp, or naked light,fixed or portable shall be used, and no person shall have in his possession any match .01' any apparatus of any kind for producing a naked light or spark in or on, or .about any part of the factory where there is liability to fire or explosion from inflammable ga.s, vapour or dust, and all incandescent electric lights in such parts shall be in double air tight covers. (6) Prominent notices in the language understood by the majority of the workers ~n~. that can. be read by day and by night, prOhibiting smokmg, the use of naked lights, and the carrying of matches or any apparatus of any kind for producing a naked light or spark, shall be affixed at. th~ entrar;ce of c'lery room' or place, where there IS rlsl< of fire or explosion from inflammable gas, vapour or dust. In the' case of illiterate workers the contents of the notices shall be fully and carefully explained to them when they commence work in the factory for the" first time and again when they have com­ pleted one week at the factory. (7) A sufficient supply of spades, scrapers and pails made from non-sparking materia! shall. be provided for the use of persons employed-Ill cleanmg out or removing residues from any chamber, stilI, t~.nk or other vessel where an inflammable or ex­ plosive danger may occur. (Note: "":"'The risk is not al",ays obvious and may arise, for. example, through the production of hydrogen in acid tanks.) . 19. Statio electricity. - (1) All machinery and plant,particularly, pipe lines and belt drives, on which static electricity is likely to accumulate, shall be effectively' earthed. Receptacles for inflammabJe Ilquids shall have metallic connections ,to the earthed supply tanks to prevent static sparking. Where necessary, humidity shall be c6ntrolied. (2) ¥obile tank wagons shall be earthed during fillingCand discharge, and precautions shaH be taken to ensure that earthing is effective before such fill­ ing or discharge takes place. 20. Lightning protection.":'-' Lightning protection apparatus shall be fitted where necessary, and shall be maintained in good condition. 21. PI'ocess heating. - The methgd of providing heat for a process shall be as safe as possible and where the use of naked flame is necessary, tile plant 'shall be so constructed ,as to prevent any escaping of inflammable gas, vapour or dust coming into con­ tact with' the flame or exhaust gases ol'other agency' likely to cause ignition. So far as practi' cable, the heating medium shall be automatically controlled at.a predetermined temperature below the 'danger temperature. 22. Escape of materials. - (1) Provision shall be made in alj"plants, sewers, drains, flues, <Jucts, cul­ verts and buried. pipes to prevent the escape and spread of any liquid,gas, vapour, fume or, dust li­ kely to give rise. to fire or explosion, boi;,.'J. during normal working. hours and in the event of accident cor emergency.. ' SERIES I No.5; (2) If escape occurs, s~ch substances shall be removed expeditiously. and efficiently at the point, of liberation. The effluent shall be trapped and tendered safe outside the danger area. 23. Leakage of inflammable liquids. - (1) Provi­ sion shall be made to confine by means of bund walls, sumps, etc. all possible leakages from vessels. containing inflammable liquids. (2) AdeiJ.uate and suitable fixed fh'e-fighting appliances shall be installed in the vicinity of such vessels. '. 24. Cleaning of erfl,pty containers, etc. - (1) All., empty containers which have held inflammable li­ quids, and metal containers which have held sulphuric acid shall be rendered permanently safe as soon as practicable, and shall not be repaired or' destroyed until such cleaning has been ,completed. (2) Combustible and inflammable materials shall not be stored in close proximity to chemicals which are liable to cause ignition. (3) Rubbish shall be removed' from buildings without delay and placed in special metal containers provided with close fitting lids. The contents shall be removed daily and suitably dealt with. Waste products containing· inflammable :01' explosive ma­ terials shall not be placed on rubbish heaps but shall be destroyed in an appropriate manner. 25. Installing of pipe lines for inflammable li­ quids. -All pipe lines for the transport of'inflam­ mable liquids . shall be protected from breakage, shall be arranged so that there is no risk of mecha-, nical damage f~om vehicles and shall be so laid that they drain throughout without the collection of de­ posits at any' part. All flanged joints, bends and other connections shall be regularly inspected. Cocks and valves shall be so constructed that explo­ sive residues cannot collect therein. The open and closed positions of all cocks and valves shall be clearly indicated on the outside. 26. Packing of reaction vessels. - Packing and joint materials for reaction vessels' (including covers, manhole covers, and exhaust pipes) and pipe lines and also the high or low temperature inSulat­ ing materials shall not contain such materials which. are combustible or which react with the products of the plant. . ;'j' -, 27. Safety valves. - Every stiil' and every closed vessel in which gas is evolved or into }Vhich gas is passed, and in which the pressure is liable to, rise to a dangerous degree, shall have attached to it a pressure gauge, and ap~oper safety valve or other equally efficient means to relieve the pressure and it shall be maintained in good condition. Nothing in- this paragraph shall apply to metal .bottles or cylinders used· for the transport of compressed gases. . " 28. Vigorous or delayed reactions . ....:... Suitable provision, such as automatic and distant . control shall be made for controlling, the effects bf uhduly vigorous or delayed reactions. Automatic flooding or blanketing shall be provided in the evep,t, of an occident. " 29. Examinatibn, testing (f,nd. repair., of pla'llt.­ Examination, testing'and repair of plant parts 3RD MAY, 1985 (VAISAKA 13! 190~7),--____________________ -=1:..:..:.59 which have been in contact with explosive and in­ flammable material, or which is under pressure, shall onl~ be carried out under proper supervision. 30. Alarm systems. - (1) Gravity or pressure feed systems for supplying inflammable materials to the various parts of the buildings or plant shall be fitted with alarm systems, automatic cutoffs or other tlevices to prevent over-charging or otherwise endangering of the plant. . (2) The. amount of inflammable material taken into a building in bUlk containers at any .onetime shall be kept as low as practicable. (3) Adequate steps shall betaken to prevent the escape of inflammable and explosivevapours from any container into the atmosphere of any building. C - GAS, VAPOUR, FUME OR DUST RISKS 31. Escape .of gases, etc. ~ Effective steps· shall be taken to prevent the escape of dangerous gases, vapours, fumes or dust fr.om any part of the plant; by the total enclosure of the process involved in air tight chamber or by the provision of efficient exhaust draught. Effective .. arrangements shall be made to ensure that in the event of failure of. the control measure provided as above the process shall stop immediateiyand the. dangerous gases,vapours, fumes or dust which have escaped aretmpped and rendered safe. 32. Danger due to effluents. - (1) Adequate pre­ cautions shall be taken to prevent the mixing of effluents which may cause dangerous or pois.onous gases to be evolved. (2) Effluents which may contain or give rise in the presence of other effluents, to such gases shall be provided with independent drainage systems to ensure that they may be trapped and rendered safe. 33. Staging. ---.: (1) Staging shall not be erected .over any open vessel unless the vessel is so cons- . tructed and ventihted to prevent the emission of vapours of fumes about such staging. (2) Where such staging. is provided to give access to higher levels in large plants, effective means shall be provided at all. levels with direct means .. of access to the outside of ~he room or building. and thence to ground level. (3) . Such staging shall be· fitted. with suitable handrails and toeboards and the floors and' staging shall be impervious and easily cleaned. . 34. Instructions as regards risk. - Before com­ mencing work, every worker shall be fully ins­ tructEid about the. properties of the materials they have to handle, and of the dangers arising from any gas, fume, vapOur. or. 'dust which maybe evolved during the pr(jcesl>.' Workers shall also be instructed of the measures: to :be adopted to deal with suchitn escape of dangerous gas, fume, vapour or dust· in the event of emergency. . 3.5. Breathin;afYParatU8.~ (1) There shall be' provided in every' factory where.dangerUus.gas'or fume is liable· to escape .,asufficientsupply 01-'- .\. '. . i- .' 'Ca) bre3.thil1g~pparatus <if an appro'V'~d.ina,ke :for the hazards iriyolved; ...... '.' ,.? (b) oxygen and suitable mean .... of .its a.dminis­ tration; and, (c) life-belts. '" (2) The breathing apparatus' and other appli­ ances required by thi.sparagraph shall . (a) be maintained 'in good order and kept in an ambulance room or in some' other ,place approved, in writing by the Chief Inspector; and (b) be thoroughly inspectedonc,", every month by a competent person app.ointed in writing by the occupier, alJ,d a record pftheir c.ondition shall be entered in a book provided for that purpose, which shall be produced. when required bY,;a,n Inspector .. (31) Workers shall be trained and given a periodic refresher course, in the use of breathing apparatus and respirators. . . . (4) Respirators shall be kept.properlylabelled in clean dry lightproo( cabinets,. and if liable to. be affected by fumes, shall be protected by sultable containers. Respirators shalLbe dried and cleaned after use and shall be periodically disinfected. 36. Treatment o/persons.-"'- In every.room or place so specified in writing by.the Chief Inspector, there shall be . affixed the official cautionary notice. regarding dangerous ·gases and:burns. Such notices shall be legible by day and by night and sh,all' be printed in the languageunderstciod' by the majority of the. workers. . .,: . 37. Personal protecti1)~ eq~ipment: -'-(1) . Sui­ table. protective, clothing ;shall. be provided for the useof'operators~ , (a) .,W!1enoperatingon v'l\l~es or:cocltScOlJ,­ trolling fluidS which by: theirlJ,ature,Pressure or temperature wouldbehighly:,Cllll'lgerous if a blow­ -9ut were. to occur 'or, when;, ~lea,lJ.ing chokes in systems' contailling SUCll: .fllli~, .if pressure is clie kelyto exist behind the chokes;: ." . '. (b) When there is dangerof,injury byabsorp­ tiori >Ilf corro.sive. su.b§tance through rskinduring the perfllrmance of normaldu,t~esprilJ,theevent .of.el'nergeIfCY; . . 'Iv (c) Whenever there is riskbf injury in hand­ ling corrosive substances, hot or cold articles, : and sharp or rough pbjects; and ..•.• . .. . ". -' ~ , , ; - ~: :. .• " , -. " . ,::,!, , . Cd) When there·:is risk of 'poisonous materials being carried away on the clothes of operators. .. ,;.' 0), _,' (2) There ShalL be .. provided 'for the 'use'ofall persons.employed·.in ,the. processes .specified in appendix B an .adequate.snpply·of·suitabieprotecc tive equipment inciuding gloves,',overalls and pro­ tective footwear and of goggles . and ,·espirators. Respirators.'shallbe·hf\L,type approved' in writing by the ChiefInspector.' , 'cre.··' ',_,;;. _~.,,'.,J,_ ,'1',. ,)'-, ',," . (3)Protecti've equipment shalh;be . provided and stored .in the appropriate piace"Jfor"use ';durIng abnormal cimditions orin an em~vgenc:y.: . ;, . . ". - .;., < - . -. .', . ~;~. ) ,"" - ' . . (4) Axrange!ll~nts. shall bemadeJ for. the· prope]) and. efficientc:lllaning of.;allsuch,protective equip. ment. . .. ,e,',': . '0, ,<ti-rr> . ----.---------.---.•..•... -. SERIES I No.5 160~ __________________ __ --~--------~---------------- 38. CloakrOOtYn8. - There shall be provided and maintained for the use of all persons employed in the process specified in appendix, B, a suitable cloakroom for clothing put off during work hours and a suitable place separate from the cloakroom, for the storage of overalls or working clothes. The accommodation so provided shall be' placed in the charge of a responsible person, and shall be kept clean. 39. Special bathing facilities. - (1) There shall be provided for the use of all persons employed in the processes specified in the appendix C, separate sanitary conveniences and sufficient and suitable bathing facilities, as approved by the Chief Ins­ pector. (2) A bath register shall be kept containing the names of all persons employed in these, processes and an entry of the date on which each person takes a bath. 4(}. Entry into vessels. - (1) Before any person enters, for any purpose except that of rescue,. an absorber, boiler,' culvert, drain, flue, gas purifIer, sewer" still, tank, tower, vitriol chamber or other place where there is reason to' apprehend the pre­ sence of dangerous gas or fumes, a responsible person appointed in writing by the occupier for this purpose, shall personally examine such place and shall certify in writing in a book kept for the pur­ pose either that such place is isolated from every source of such gas or fume and is free from danger, or that it is not so isolated and sealed and free from danger. No person shall enter any such place which is certified not to be so isolated and sealed and free from danger unless he is wearing a breathing apparatus, and (where there are no cross stays or obstruct,ions likely to cause entanglement) a life­ -belt, the free end of the rope attached to which shall be left with a man outside whose sole duty shall be to keep watch and to draw out 'wearer if he appears to be affected by gas or fume. The belt and rope shall be so adjusted and worn that the wearer can be drawn up head foremost through any man­ hole or opening. (2) A person entering for the purpose of rescue into any such place for which a clearence certificate has not been issued shall wear a breathing appa­ ratus and a life-belt in the manner specified in sub­ ,paragraph (1) above. 41. Examination 'and repair, of plant. - Where poisonous materials are likely to be present the exa­ mination and repair of plant and piping shall only be done under the supervision of a competent person, and after the plant and piping has been thoroughly cleaned and ventilated. When opening vessels and breaking joints in pipe lines, respiratQrs, goggles and protective clothing shall be worn to the extent required by the competent person. 42. Storage of acid carbQys. - Carboys contain­ ing nitric acid or "mixed" acid shall ,be stored in open-sided sheds detached from bther buildings, and placed on a flooring of sandstone, brick or other suitable inorganic materials. A passage way, shall be provided and kept free from obstruction between every four rQws of such carboys. An ample supply of water shall be available for washing away spilt acid and all precautions shall be taken to prevent workers being exposed to fumes. D- RISKS OF CORROSIVE OR DELETERIOUS: SUBSTANCES 43. Buildings. - All buildings and plant shall be sited with due regard to possible dangers from acci­ dental liberation or splashing of corrosive and dele­ terious liquids, and shall be so designed as to faci­ litate thorough washing and cleaning. The cons­ truction of staging and other parts of buildings shall be carried out with materials impervious and resistant to corrosion so far as practicable. 44. Leakage. - (1) All plants shall be so desig­ ned and constructed as to obviate the escape of cor­ rosive liquid. Where necessary, separate buildings, rooms or protective structures shall be used for the dangerous stages of the process and the buildings shall, be so designed as to localise any escape of liquid. . (2) Catch pits, bund walls or other suitable pre­ cautions shall be provided to restrict the serious effects of such leakages. Catch pits shall be placed below joints in pipelines to prevent danger to wor- kers from such leakage. ' (3.) Passages and work stations shall not be situated directly below any part of plant where there is risk of escape of dangerous liquid. Access to such parts shall, so far as practicable, be prohi­ bited,. and danger notices shall be affixed at sui­ table points. 45. Precautions against escape. - Adequate pre­ cautions shall be taken to prevent the escape of corrosive or deleterious substances and means shall be provided· for rendering safe any such escaped corrosive or deleterious substances. 46. Drainage. ---.: Adequate drainage shall be pro­ vided and shall lead to' special treatment tanks where deleterious materials shall be neutralised or otherwise rendered safe before it is, discharged into ordinary drains or sewers. 47. Covering of vessels. - (1) Every fixed vessel or structure containing any dangerous material, and not so covered' as to eliminate all reasonable risk of a.ccidental immersion in it of any portion of the body ofa worker, shall be so constructed that there is no foothold on the top or the sides. , (2) Such vessel shall, unless its edge is at least 90 centimetres. above the adjoining ground or plat­ form, be securely fenced to a height of at least 90 centimetres above such adjoining ground or plat­ form. (3) No plank or gangway shall be placed across or inside any such vessel, unless such plank or gangway is at least 45 .centimetres wide, and is securely fenced on both sides by rails spaced at 22.5 centimetres apart toa height of at least 90 centimetres or by other equally efficient means. (4) Where such vessels adjoin and the space bet­ ween them, clear of any surrounding brick or other work is either less than 45 centimetres in width or is 45 or more centimetres in width, but; is not secu­ rely fenced on both sides to a height of at least 90 centimetres, secure barriers shall be' so, placed as to prevent passage between them: 3RD MAY, 1985 (VAISAKA 13,1907) Provided that sub-paragraph (2) of this paragraph shall not apply to- (a) saturators .used in the manufacture ofsul­ phate of ammonia; and (b) that part of the sides of brine evaporating pans which require raking, drawing or filling. 48. Ventilation. - Adequate ventilation shall be provided and maintained at all times in rooms or buildings where dangerous gas, vapour, filme or dust may· be evolved. . '49. Means oj escape. - Adequate means of escape from rooms or buildings in the event of a leakage of corrosive liquid shall be provided and maintained. ·50. Treatment of per~nel. -,- (1) In' all. places where strong acid or any other dangerous corrosive liquids are used. there shall be, provided for use in an emergency - (a) adequate and readily accessible means of drenching with cold water the persons and the clothing of persons, who' have been splashed with such liquid; . (b)' adequate special arrangements to deal with any person who has been splashed with poison~us material that can be absorbed through the skm; and (c) a sufficient number ofeye-w:ash b~ttl~s, . filled with distilled water or other SUItable liqUId, . kept in boxes or cupbo!.lrd ~o~ven~entl~ situa~ed and clearly indicated by a dlStmctive SIgn whlch shall be visible at all times. ," ' . . . ' '. (2) EXcept where the manipulation of ~uch corro' sive' liquids is carried on as to prevent rIsk of per­ sonal injury from splashing or otherwise: there shall be provided for those w:hohave to manIpulate such liquid sufficient, and SUItable goggles and gloves or other. suitable protection. for the eyes and hands. If g16ves are provided they shall be collect~d, exa­ mined, and cleansed at the close of the day s work and shall be repaired or. ,renewed when necessary. 51. Maintenance. - (1) Before any examination or repairs are carried oyt on plaIlt or pipe U.n~, a competent person shall'Issue a clearance certIfIcate permitting such examination or repairs. (2) Adequate' precautions shall be taken to libe' rate any pockets of gas or liquid Which may have been formed' in pipe lines, and which may cause corrosive spray at the point wq.ere dismantling takes place. , 52. Washing /aciUties.- (1) There shall be pro­ vided and maintained in every factory for th~ use of employed persons adequate and suitable fa~ilities for washing which shall include soap and' naIl bru­ shes or other sUitable means of cleaning and the facilities shall be conveuiently accessible and shall be kept in a clean and orderly condition., (2) If female workers .are employed separate washing facilities shall be, provided and eo enclosed or screened that the interiors are not visible from any place where persons ,of the othl'r sex .work or pass. The entrance to such facilities shall bear cons- 161 picuous notice "For Women Only" in the langnage understood by the majority of the workers and shall also be indicated pictorially. 53. Messroom facilities. - In every factory there shall be provided and maintained for. the use of those remaining on the premises' during the rest intervals, suitable and adequate messroom or can­ teen accommodation whiclI shall be' furnished with sufficient tables and chairs or benches with back rest and Where sufficient: drinking water is availa­ ble. 54" Ambulance rOOm. - (1) In every factory. in which more than 250 persons are employed on the processes to which this Schedule applies, there shall be provided and maintained in good order an ambu­ lance room. (2) The ambulance room shall bea separate room used only for the purpose of treatment and rest. It . shall have a floor space of Dot less than 9 square metres and smooth, hard and. impervious walls and floor, and shall be provided with ample means of natural and artificial lighting~ It shall contain all the items shown in appendix D. . . (3) Where persons of both. ~exes are employed,. arrangement shall be made at the' ambulance room for their separate treatment. . (4) The amb~ce room shall be placed under the ~har~e Of. a qualifIed nurse or other'person trained In ~Irst-aId, .who shall always i;Je readily available durmg workIng' hours, and shall. keep a record of all cases of accigents or sickness :treated in the room . . -. ' -'-J . ,55.A~buZance van. ~It!.everyfactory there shall be prOVIded and m!lintained in good condition a sui­ . tably constructed ambulance van for the purpose or removal of serious cases of accid,ent or sickness, unless arrangements have been made with it hospital or other place in telephonic communication with the factory for; obtaining such a carriage immediately when required. , .' '. ; 56. M edicaZ personnel. - There. Shall be a whole­ time medical officer in every factory employing 250 'persons Or more. ' 57. Medical examination. - (1) Workers engaged in themanufacttire, processing, formulation or use of the following' shall be examilied once in every three months by the Certifying ;Surgeon and records maintained: -:- . (a) hexaethyl tetraphosph3.te; (b) tetra ethyl pyraphoshatEi; (c) 0, o-diethyl o-p-nitrophenyl thiophosphate (Perathion) ; (d) nicotine and nicotine sulphate; (e) mercury derlvates; . (f) methyl bromide; (g) . cyanides;' (h) arsenical derivatives; ... . (i) chrome pr6cesscompound8;.and (j) nitro or amido process compounds. (2) A' health register containing the names' of all peraorisemployed in the pi:oCessshall be kept , in a form approved ,by the Chief Inspector. 162 ._--'-'- (3) No new person shall be employed for more than 14 days Without a certificate of fitness granted after examination by the Certifying Surgeon, who shall make an entry duly signed, in the health register. (4) Every person so employed shall present himself at the appointed time for examination by the Certifying Surgeon as provided in sub-paragraph (3). (5) The Certifying Surgeon shall have the power to suspend any person employed if he has reason to believe that continuance of such person in such employment shall be. dangerous to. his health and no person after such suspension shall' be employed without. written sanction from the Certifying Sur­ geon a!1d entry' to. that effect in the health. register. 58. Duties of workers. - (1) Every person em­ ployed shall- (a) report to his foreman any defect in any fencing,breathing apparatus, appliance or other requisite 'provided in pursuance of this Schedule, as soon as he becomeS aware of such defect; (b) use the articles, appliances or accommoda­ tion required by this Schedule for the purpose for which they are provided; (c) wear the breathing apparatus and life-belt as required under paragraph 40. (2) Every person employed -. . (a) in a process to whiCh paragraph 37 applies shall wear. the protective clothing, footwear, respi­ rators, goggles or gloves provided under para­ graph 37 and shall deposit overalls or suits or working clothing so provided, as well as clothing put off during working hours, in the .places pro- vided under paragraph 38;' . (b) in processes to which paragraph 39 applies, shall carefully wash the hands and face before partaking of any food or leaving the premises; and (c) in any processes to which Part IT of this Schedule applies, shall use the protective appli­ anc~ supplied in respect of any process in which he IS engaged. . (3) No person shall- . (a)~move any fencing provided.in pursuance of. paragraph 47' uuless .. duly authorised; (b) stand on the.edge or on the side of any vessel to which paragraph 47 applies; (c) pass or attempt to p~ any barrier erected in, pursuance of paragraph 47; (d) place across or inside any vessel to. which paragraph 47.applie!l, any .plank or gangway which does not comply With that paragraph or make use of any such plank or gangway while in. such position; . . (e) take a naked light oranylamp or matches or any apparatus forprOduciIig a naked light or spark into,orsmoke in, any part of the works where there is'liability to . explosion from inflam­ mable gas, vapo1U" or dust; • ' :. • ';. ;-. j - .' - ~. , . '. (f) lIse. a.metal spade"scraper or ,pail when cleaning out or removing ~e residues from .any SERIES I No.5 ,chamber, still, tank or other vessel which has con­ tained sulphuric acid or hydrochloric acid or other substance which may cause evolution of arseni- uretted hydrogen; and ' (g) remove from a first-aid box or cupboard or from the ambulance room any fIrst-aid appli­ ance' or dressing except 'for "the treatment' of injured workers in the premises. 59. Exemption. - If the Chief Inspector is satis­ fied in respect of any factory or any process that, owing to the special conditions or special methOds of work, or by reason of the infrequency of the proc,ess or' for other reasons; -all or any of, the requirements of this Schedule are not necessary for the protection of' persons employed in any factory or process, he may by order in writing (which he may' in his discretion revoke) exempt any factory or process from all or any of the 'provisions of this Schedule, subject to such conditions as he may by such order prescribe. PART IT Applying to tlte works in Appendix E 60. Entry into gas tar or coal tar sun, - Before any person enters a gas tar, or coal tar still for any purpose except that of rescue, it shall be completely isolated from adjoining tar stills' by disconnecting either- ' (a) the pipe leading from the swan neck to the condenser work; or (b) the waste gas pipe fixed to the worn-end or receiver,""and' in addition, blank flanges shall be iIiserted between 'the disconnected parts and the fitch di!!charge pipe or cock at the bottom of the still shaH be dis-' connected. 61. Entry into bleaching power chamlJers. - (1) No person shall enter a chamber for'the purpose of withdraWing the charge of bleaching powder unless lJ.nd until- (a) the Chamber is efficiently ventil,lJ.ted; and (b) the air in the chamber has been testedlJ.nd found ,to contain not more than 6 grammes of free chlorine gas per cuhlc metre., (2) A register containing details, of' all 'such tests shall be kept in a form approve4 by the Chief Inspector. . ' ;," 62. Special precautions for nitro and amido pro- cesses. -'-- In a nitro or amido process - ' (a) if crystallised substances are broken or any liquor' agitated by hand, precautions shall be taken to prevent, as far as practicable, the escape of dust or fume into the air"or anyplace in which , any person is employed. The handles oiall inIple­ ments used in the operations shall be, cleansed daily; , (b) cartridges shall not be filled by hand but by means of a suitable scoop; " , ' , " (c) every 'drying stove shall be 'efficiently vene tilated to the outside air in' such a manner that hot air from'the, stove shall not be drawn into any workroom; 3RD MA:Y, 1985, (VAISAKA 13,1907) .' (d) no per~on shall enter a stove to remove the . content,s until a free current of air has been passed through it; and . (e) every vessel containing nitric or amido deri­ vatives of phenol or of benzene or its homologues shall, if steam is passed into or around it, or if the temperature of the contents be at or above the ,temperature of boiling water, be covered in such a way that, steam or vapour shall be dis­ charged into the open air at a height of not less than '7.6 metres from the gromidor the working platform, and at a point from where it cannot be blown back again into the workroom. 63. Precautions during caustic grinding, etc.­ Every machine used for grinding or crushing ,caustic shall.be enclosed, and where any of the. following processes. are carried on such as- . (i) grinding or crushing of caustic; (ii) packing of ground caustic; (iii) grinding, sieving,' evaporating or packing in a chrome proceSs; and (iv) crushing, grinding or mixing of material or cartridge filling in a nitro or amido process; an efficient exhaust draught shall be provided. 64. Qhlardte manufacture. - (1) Chlorate shall not be crystallised, ground or packed except in a room or place not used for any other purpose, the floor of which room or place .shall be of cement.or other smooth, impervious and incombustible material, and shall be throughly cleansed daily. (2) ,,?,ooden vessels Shan not I>e used for the cry­ stallisatIOn of chlorate, or to contain crystallised or ground Ilhlorate; . . . . .. " Provid~ that thisreqnirement shall not prohibit the packing of chlorate for sale into wooden casks or other wooden' vessels. .. . 65. Reg(;riotions on the employment o/young'per­ sons' and women. - (1) Persons under 18 years of age and women shall not be employed in any process ·in which hydrofluoric acid fumes or ammoniacal. vapours are given off or in. any of the following operations: - . . . (a) evaporation of brine in open panS; (b) stoving of salt; (c) work at.a furnace where the treatment of zinc ores is carried on; and . (d) the cleansing of workrooms where the pro- . . cess mentioned in (c) is carried on. . ' (2) No person under 18 years of age' shall be employed in a chrome process or in a nitro or 'amido processor in' a process in. which the follOwing materials are used or where the vapour of such, materials is given off namely: _ . (a) . carbon bisulphide; . (b) chlorideS of sulphur; (0) benzene; . (d) carPon tetrachloride; (e) trichloro-etblene; (f) . any carboncblorine compound; and ~! any mi~e contlUniDg any of such mate. 163 APPENPIX .A Any works or that part of works in which ~ (a) thenianufact~e or recovery of any of the following is carried on namely:- (i) ,carbonat~s, chromates, chlorates, oxides or hydroxides of potassium, sodium, iron, alluminium,cobalt, nickel, arsenic, anti­ mony, zinc or magnesium; (ii) ammonia and. the ,hydroxide and salts of ,~onium; ." (iii) sulphurous, sulphuric, nitric, hydrochloric, hydrofluoric, hydriodic, hydrosulphuric, b0- ric, 'phosphoric, oxalic; arsenious,arsenic, lactic,acetic,tartaric. or citric acids· and their metallic or organic salts; and (iv) cryanogen compoimds;· (b) a wet process is carried on ~ (i) for the extraction'of metal from ore or from any by-prOductor'residtialmaterial; or (ii) in which electrical energy is Used in 8.1ly process of chemical manufacture; . (c) alkali waste. or tile drainage therefrom is subjected to any Chemical prOCless for the recovery of sulphur; or for the utilisation of any constituent of sU,ch waste or drainage;' . (d)'carbon b;sulphide is made or 'hydrogen sulphide is .evolved by the decomposition of metallic sulphides or hydrogen sulphide is used in the prOduction- of such sulphides; . (e) bleaching powder is manufactured or chlo,­ rine gas is made or is used in any process of .che- mical manufacture; . ,.' , (f) (i) gas tar or coal tar or any compound . prOduct or residue of, such tars is dis­ tilled or is used in any process of che­ mical manufacture; .' . (ii) synthetic colouring matters or their in­ . termediates are made; (.g)' refiilingof crude shale oil'or any process In- cidental thereto is carried out;· . . (h) nitro" acid is used in the nlanufacture of nitro compounds; . (i) explosives are made with the use' of nitro compounds; . (j) phoSgene(carbonyi'chlo~d~) is ma,nufac­ tured or is used in the proceSs' o'f'Ciiemical manu­ facture ; and . (k) aliphatic or aromatic c6i1ip6unds or 'their deriva1Jves or substituted derivatives are manu­ factured or recovered. APPENDIX a" 1. A nitro or amido process. 2. Grinding raw materials in ,a chrome process. 3. ';l'he crystal department and the packing room m a chrome process. , ,.. '. 4. Packing in a chrome process;" 5. Any room or place in which chlol'l1-te.is cry~ic sed"ground or 'packed.' .' . .' 164 6. Any·room in which caustic is ground or crushed by machinery. 7. Bleaching powder chambers, or in packing charges drawn from such chambers. 8. Drawing off of molten sulphur from sulphur pots in the proCess of carbon disulphide manu­ facture. APPENDIX C 1. A nitro or amido process. 2.. The crystal department and the paCking room in a chrome process. 3. The process of distilling gas or coal tar (other than blast furnace tar) and any process of che­ mical manufacture in which such tar is used. , APPENDIX D 1. A glaZed sink with hot and cold water always available. 2. A table with.a smooth top. 3. Means for sterilising instruments. 4. A couch. . 5. A stretcIier. 6. Two buckets or containers with close-fitting lids. 7. Two rubber hot water bags. 8. A Kettle and spirit stove ol'()ther suitable means of boiling water. . 9. Twelve plain wooden splints 900m X 100m X 6m. 10 .. Twelve plain wooden splintS '350m X 75 m X 6m. . 11. Six plain wooden splints 250 m X' 50 m X 12 m. 12. Three woollen blankets.; 13. One pair artery forceps. 14. One bottle of brandy. 15. Two medium size sponges: 16; Three hand towels. 17. Two kidney trays. 18. FoUr carbolic soaps. 19. Two glass tumblers . and two wineglasses. 20. Two c1inicalthermometers. 21 .. Graduated measuring. glass with teas~n. 22. One eye bath. 23. One bottle (900 gms.) carbolic lotion 1 in 20. 24. Two chairs. 25. One screen. 26. One electric hand torch. 27. An adequate supply, of anti-tetanus serum. 28. Two first-aid boxes; each containing- (a) twenty four small sterilised dressings; (b) twelve medium size sterilised dressings; (c) twelve large size sterilised dreSSings; (d) twelve large size sterilised burn dressings; (e) twelve half-ounce packets of sterilised cot- ton; (f) one snake-bite lancet; . (g) one pair of scissors; (h) two one-ounce bottles of potassiUm per-' manganate. crystals; .' . (i) Qne, four-ounce 'bottle containing a two per cent alcoholic solution of iodine' . , . ."; . ,. SERIES i No. 5 (j) one four-ounce bottle of sal volatile having the dose and mode of administration indi­ cated on the label; and (k) one copy of the fIrSt-aid leaflet issued by the Directorate General Factory Advice Service and Labour Institutes (Government of India), Bombay. APPENDIX E 1. Any works or that part of works in which - (a) causticpota.are used; (b) chlorate or bleaching powder is manufac­ tured;. (c) (i) gas tar or coal tar is distilled or is used in any process of chemical manufacture; (ii) a nitro or amido process is carried on; (iii) a chrome process is carried on; (d) crude shale oil is refined PI' processes inci- dental thereto are carried on; . (e) nitric acid is used in: the manufacture' of' nitro compounds; (f) the evaporation of brine in open pans and the stoving of salt are carried on; or (g) the manufacture or recovery of hydrofluo­ .ric acid or any of ij:s salts is carried on .. 2. Work at a furnace where the treatment of zinc ores is carried on. SCHEDULE XIII Manufacture of articles from refractoJ'Y materials 1. Application and exemption. - This Schedule shall apply to the following processes: ~ (a) handling, moving, breaking, crushing, grinding or sieving of any refractory materials, containing not less than 25 per ,cent total silica for the purpose of manufacture _ ' (i) of articles used in the construction offur~ na~es and flues; W) of crucibles; and (iii) .of compositions or other materials used in the preparation of moulds in which metals are cast; or (b) any process in the manufacture of refrac" tory brick as hereinafter defined: Provided that nothing in this Schedule shall apply- (i) to handling, moving, mixing. or sieving of natural sand; or . ' (ii)to the manipulation of rotten rock in the preparation of moulds, used in metal fOilndries: Provided further that. if· the Chief Inspector of Factories is satisfied in respect of any ,factory or part thereof that owing to the special conditions of work or otherwise, that .any of the requirements of this Schedule can be suspended or relaxed without any ~anger to the health of the person employed therem,.hemayby~ order in writing grant' such suspenSIon or rel~tion, for such period and on such conditions ashe may think fit. Any such order may be revoked· at any time. " . ' 3RD MAY, 1985 (VAISAKA 13,1907) 2. Definitions. - For the purposes of this Sche­ dule- (a) "refractory, material" means any refractory material containing not less than 25 per cent total silica; (b) "refractory brick" !Ileans any brick or ar~ " ' ticle, composed of refractory material ,and containing not less than 25 per cent total silica; and '.. (c) "efficient exhaust di:-aught". means loca- · lised ventilation ·by mechanicaJ.meanS for the removal of dust so ,as to prevent.dust from escap­ ing into the air of any place in which work is · eattied> on, No draught shall be deemed' to be efficient which fails to remove the 'dust prodUced at the point where such dust originates. . ~. Refraotory m.a.te1'ial not to .be broken. - No refractory material shall be broken in pieces by manual labour unless the process is carried out in the open air: . Provided that where it is not practicable to carry out this process in open air, the process shall be carned out under an efficient eXhaust draught. 4. Crushing or grinding of refractory 1naterial.­ No. refractory material, unless it is so wet that dust willnot be'produced, shaWbe crushed or ground in a stone crushing. or, grinding. machine unless such machine is provided With - . . (a) an efficient eXhaust draUght and efficient. · dust collecting appliances; or .. (b)' an effiCient water or steam spray: . Provided that every grinding, machine wherein any refractory material is groUnd: in dry state, shall be, .totallY enclosed 'and connected to a mechanical exhaust system' so as to prevent effectively, any escape of dust outside thHlasing of the machine by maintajning a pressure below the atmospheric pres" sure Withih' the casing of the machIne: Provided further that all " processes of crushing andgriIlding shall be effectively isolated from other processes. 5. Refractory material handling equipment to. be enolosed.- All chutes, conveyors, elevators, screens, sieves and, mixers used for manipulating refractory material shall; Unless the material is so wet that dust will not be produced, be 'enclosed a,nd be pro­ vided with an efficient exhaust draught. . '. . ' . 6. 'Preoautions in handling refractory 1IIaterial. - No refr!tctory material so dry as to produce dUst shall- . (a) be loaded into any wagon or other recep­ tacle for transport' unless ithai! been placed in a suitable dustproof container so dampened as to preclude dust; , (b) be unloadildfrom any wagon on other re­ ceptacle for transport unless it has been so dam- . pelied as to preclude dust or uliless, the work is .' done under all Elfficient ~a~st draught; or . , " (c) "p.e .. l!hovelled: or raked .or otherwise mani­ p'ulated by means of hand tools in any manu- .165 facturing process unless it has been so dampened as to'preclude dust or. Unless the work is done under an efficient eXhaust driiUght: . · Provided that sub-Pai'agraph:<b)ofthisllaragraph Shall hota:pply to refractory material in the form bf rock or pebbles before' it is 'maniPulated i'llany manufacturing process. .' '.' . . . . 7. M~inteitanoe, of. flooTs.- (1) The floorS. of all places where" refrad:ory bricks,are dried,i)thet than' the floors of tunnel 'ovens or chainber driers not normally entered, by persons employed. Shall,. after each .lot of. ;r~fractoi:y llricks :b:as heen .relUoved, be (Jarefully cleaned of alI debris and the .·partbeing · cleaned shall' be kept dainp while' 'th.e cleaning is' being done. ". '. . · • (2)Th~re, shall beprovided)rieveiy such placll 'a . constant supply of water jaid on Under adequate pressure with sUfficient connections and a flexible branch pipe and sprinkler to enable, wate~ to be supplied direct to everypartbfthe floor .. 8. Prohibition of use of drying stove. - No drying stove in which refractory bricks. are baked by fires before being placed in the kilns, shall be used. 9. Cleaning of floors and suppression of refractory dust. ~ The surface of every floor or place where persons are liable to pass Shall be cleaned of debris of . refrac~orymaterial once at' least during 'each dally . perIOd of, employment or where. shifts 'are worked, once during .each shift; Such debris unless it ' is immediatel! required for use in the processes, shall be effectIvely dampened and. either be placed in covered receptacles, or be :otherWise'stored in· such a manner as to .prevent the escape of dust iuto the air in or· near to any place where any person is employed. , ' 10. Suppre8sion of refractorYd,u8t while drying, -Where plates are used, whether portable. or :for"' ming part of the floor, on whichrefi-ltctory:brickS are dried,. such plates shall be freed from adherent material only by a wet method' or by such other m!!tMd as will prevent the escaper of, dust into: the air. .' ... : , .' -. · It.PfohibiWln of use of refrdi:tory (iiWit for ~ldiny. -'-- The dust or powder :of refractory ina" terIals shall not be used for sprinkling the moulds in 'refractory bricktnaking: . , ," ," '.,... . ' .' , Provided that nothing in this p~agra.llh shall be deemed to prevent the use of natural sarid for the );lnrpose of sprinkling the moulds . 12. Workers 'lWt to work in refraCtOry dust dt11W8~ phere.- No worker shall be allOWed tb work on ariy dust process or. at lli?Y place wherEiaust of any re" fractory materIals IS prellent in ·the atmosphere: . Provided that.in an emergency a'workermay be allo~ed to work at fluch process or pla.ee if he wears a SUItable and effic~eil.t dust mask orcbi'eathing appa- ratus. ' . , . · 13. Mediciil ·erJJamination. -'- (1) Evei'yworker ~mployed.on any day of the pr0cesses. specified in sub-pa~~grll:ph~(a;)~d (b) of p'aragrap!rl shall_ be medIcally.exammed· m such a manner'aridal:' Sucli \ 166 intervals as may be specified by any rules' made under the Workmen's Compensation Act, 1923 or if no such rules have been framed under the said Act, every such worker shall be medically examined by the Certifying Surgeon before employment on any of the aforesaid pro(less and at an interval not ex­ ceeding six months thereafter. (2) Subject to sub-paragraph (3), an X-ray exa­ mination of the chest of every worker referred to in sub-paragraph (1) shall be carried out- (a) if he is already in employment on the date of coming into force of the sub-paragraph, within six months of such date and at an interval of every three years thereafter; (b) if he is employed after such date within one month of the date of his employment and at an interval of every three years thereafter; . and the result of every such X-ray examination shall be produced before the Certifying Surgeon within a month of the examination. (3) If the Certifying Surgeon, during the course of medical examination of any worker under sub­ -paragraph (1) has reason to suspect onset of any chest disease; he may direct the manager or the occupier to get an X-ray examination of the worker done and to produce the X-ray plate before him within a specified time and on receipt of such direc­ tion, the manager or the occupier, as the case may be, shall carry out the direction. (4) The Certifying Surgeon shall grant to each worker examined,. a certificate specifying therein whether or not the worker was considered fit to be employed on any of the aforesaid processes.' (5) The manager shall maintain 'aregister in which the findings and recommendations of the Certifying Surgeon in respect of every worker and in respect of every medical examination shall be maintained duly signed by the Certifyin&" Surgeon. (6) A worker not declared fit shall not be employ­ ed on any of the aforesaid processes and he shall be employed on only such other process or he shall be subjected to such other examination or treat­ ment.as may be directed by the Certifying Surgeon. (7) No fees· shall be charged from any worker for the medical examination and it shall be the . responsibility of the occupier. and the manager to comply with the provisions of this Schedule. . 14. Time limit for compliance in respect of exi8t­ ing plants. - In . case any existing plant or ma­ chinery which needs alteration, modification. or replacement or in case of any new .plant to be mS­ talled, is required to comply with the requirements of this Schedule, such alteration, modification, re­ placement or installation of the plant or machinery shall be 'carried on within a period not exceeding six months from the date of publication of this Schedule: Provided that the Chief Inspector of Factories in consideration of·· special and exceptional' circums­ tances by an order in writing may extend this period to such further period as he may think fit. SERIES 1 No.5 SCHEDULE XIV Handling and processing of asbesWs, manufacture of any article of asbesWsand any other process of manufact;ote or otherwise in wbich asbestos is used in any form 1. ApplicatiOn - This Schedule shall apply to fac­ tories in which any of the following processes are carried on: - (a) breaking, crushing, disintegrating, opening, grinding, mixing or sieving of asbestos and any other processes' involving handling and manipula­ tion of asbestos incidental thereto; (b) all processes in the. manufacture of asbestos, textiles including preparatory and finishing pro­ cesses; (c) making of insulation slabs or sections, com­ posed wholly or partly of asbestos, and processes incidental thereto; , . (d) making. or repairing of msulating mattres­ ses, composed wholly or partly of asbestos, and processes incidental thereto; (e) manufacture of asbestOs cardboard and paper; (f) manufacture of asbestos. or cement goods; (g) application of asbestos by spray method; (h) sawing, grinding, turning,. abradhig and polishing, in the dry state, of articles composed wholly or partly of asbestos; and (i) cleaning of any room, vessel, chambers, fixture or appliances for the collection of asbestos dust: Provided that if the Chief Inspector is satisfied that in respect of any factory or .workshop or part thereof by reason of the restricted use'of asbestos or the method of working, or O(lcasional nature of work, or otherwise, all. or any of the provisions of this Schedule can be suspended or relaxed without danger to the health of the persons employed therein, he may grant suspension or relaxation in writing under such conditions as he may think fit. Any such certificate may be revoked at any time. 2. Definitions. - For the purposes of thi~ Sche- dule- '. (a) "asbestos" means any fibrous silicate mine­ raI, and any ~ admixture containing any such mineral, whether crude, crushed. or opened; , (b) "asbestos textiles" means yarn or cloth composed of asbestos or asbestos mixed with any other material; (c) "preparing" means crushing, disintegrating' and any other process in or incidental to the open­ ing of asbestos; (d) "approved" means approved.for the time being in writing by the Chief Inspector; and (e) "breatrung apparatus" means a helmet or face piece With necessary connection by means of which a persOn using it can breath air free from dust, . or any other approvedapparatils of like nature. I~ . , 3RD MAY, 1985 (VAISAEA 13,1907) 3. Exhaust draught. - An exhaust draught ef­ fected by mechanical: means which prevents the escape of asbestos 'dust into the a.n:: of any ro?m in which persons work, shall be proVided and mam- tained for - " (a), manufacturing and conveying machinery namely: - . (i) preparing, grinding or dry mixing'ma.~ chines; ". . . . .,j . '. (il) carding, card waste-end, rmg,' spmnmg machines and looms; (iii) machines or other plant fed with asbes- tos; and . (iv) machines used for the sewing, grinding, turning, abrading or polishing, in the dry estate, of articles composed wholly or partly of asbestos; (b) cleaning, and grinding <?f the cylinders or other parts of a carding machine; . . (c) chambers, hoppers or other structures into which loose asbestos is delivered or passed; (d)' work-benches for asbestos·waste sorting or for other manipulation of asbestos,by hand; , (e) workplaces at which the filling oJ;e.t;npt~g of sacks, skips or other portable contame~ l;S carried on and weighing or other process InCI­ dental thereto is effected by hand; and (f) sack cleaning machines: Provided that this clause.'shall not apply- (i) to a machine or other plant which does not give rise to asbestos dust, 'or is so enclosed as to prevent escape of asbestos dust into the air of any room in Which persons work; or (il) where the asbestos is so wet or so treated with greaSe or other, material as to prevent the evolution of dust; or , (iii) to the making or rePairing of insulating mattresses; or (iv) to mixing or blendUig by hand of asbestos. 4. Mixing OT blending. - (1) MiXing or blending by hand of asbestos shall, not be carried on except with an exhaust draught effected by mechanical means so designed and maintained as to ensure as far as practicable the suppres,sion of dust during the processes. , (2) In premises which are constructed or recons­ tructed' after the date on which, this Schedule comes into 'force, the' mixing or blending by hand of asbestOs shall not be done except in a special room or place in which ,no. other work is ordinarily car~ ried on. . .' (3) (a)Thil making or' repa1l'lllg of msulatmg mattresses composed wholly or· partly of asbestos shall not be carried on in any room in which any other work is done. , , (b) In every 'roomin:.whicli the making or repair­ ing of insulating mattresses is carried 'on.....:. (i) adequate exhaust and inlet ventilation in accordance with arrangements to be approved in , llachcase slJallbeprovide(l and maintliine(l: 167 (ti) no person other :than.those engaged in ~ill- ,ing, beating or levelling .shall be present whilst such processes,are b~ing,ca,rried. on. a;n~ work. s~ not be resumed·in'lthe, room after fllllIlg, beatmg or levelling for at least ten minutes; (iii) the floors and~nches.shall be kept dam­ pened . so ,fJ.,S to 'pryv~J:\td11ftarising therefrom effectively; ,l}nd' :." , '" "., , (iv) the covers shall be effectively; dampened inunediately after being cut out and m the case of fibre filled matt~sses,;; .shall be kept, damp . whilst. filling, beatUig' or levelling is being car- ried on.. .,,; "",' (4) (a) Stora,ge ch~~i~ or~in~lorlooSe a,sbestos shall', in the case of premises ~onstructed or recons­ tructed after' the date on':\'vb.ic!).'this Sche~iule comes into force, be effectively sepRrated from any work­ room and, in the case of other premises be effectively .sepllrated fr0lIl any workroom in whic~ the as~os is noLrequired for the purposescamed on m the . room. (b) Chambers or apparatus''for dust settling and filtering. shall not be allowed .• ill any workroom. . (c) Arrangem~nts.sli~ ~.' made .to prevent asbestos dust dischaJ;ged from exhaust apparatus being drawn into the air of any workroom. (5) All machiIlery used in prepanng, grinding or asbestos carding, card roller cll\aning and grinding, and sack cleaning and all. card' waste-endmachines, lattices" elevators, chutes and cenv~lYors shall be ~o constructed . and maintained .that ,dust or debns containing asbestos cannot el!<)a:peJrolIl. any part thereof, other than dust removed' by aIr exhaust draught provided' in. 'accordance with paragraph 3 of the Schedule. (6)(a) Clea,ning by hand of tll~ cylinders (in~lu­ ding the doffer cylinders) of· a,carding machme, shall not be.done whilst any,person other than thOse performing or assisting<at .the cle8.ning is present.' ' .. (b) After six months from the date on which.this Schedule comes into force; such 'cleaning as aforesaid shall not be done by means of h8.lld . strickles or other hand tools: Provided that the .Inspector .orthEt, Chief Inspector may direct such other measures arid precautions to be taken. as may be considered necessary for safe~ guarding the health of thewprkers employed on processes and work specified in paragraph 4, . 5. Maintenance' ot fleOTs and .work places. - (1) In every room in which any of the,'requirements of this Schedule apply - . (a) the floors, \votK~beilCh(js .and plant shall be kept mil clean >state and free from asbestos debris and suitable arrangements' shall be made for the storage of. asbestos not. ,immediately. re- ' q:uire,d for use ; .ap.d ',} (bY thidloors. snall be kept free from any mate .. rials, plant or other,articles.not immediately required for the work carried on in the room which would obstruct the proper clea,ning of the floor. ' . ·(2) Every room as aforesaid: slianb~adequateiy lighted. '. " ',' .. . . ' .' .' .. 168 6. Asbestos sack not to be cleaned b,y hand.- (1) A sackwhieh hasoontained aSbestos Sha:ll not be cleaned by hand beating 'but by a machine, complying 'with 'paragraph 3 and:, sub-paragraph (5) of para- graph 4.' ' , (2),1\11 sack~, used,ii:~cor:tafuel's for the ,purpose 'of transport of asbestos within the !actoz:y sha:ll be constructed of impermeable material 'and sh3.J.I be kept in good repair. . . '.' i:':j' 7; Te8ting of 'ventilating 'plant, -('1),' All' venti­ '1ating plant used fOI<the purpose of extracting or suppressing dust as required by this ScheduleshaU at least once in every six, months be thoroughly examined and tested by a"iloinpetent person ,and any defect 'disclosed. :bysu'Cb.'examiria'tion ap.d' test 'shall 'be rectified forthWith.' ' .; . (2) A register,containingparticillars of such ,examination and .. test and,the state "of' the plant and the repairs or alterations'iif'any) found to ,be necessary shall be l<;ept and shall be available' for inspection, by an' Inspector. 8. Provision of breathing apparatus. - A breath­ 'ing' apparatus shan be provided for every person em- ployed_' " ,'" '" , (a) in chambers containing loose asbestos; , . ". , ' ,:. '-.;- :'.' ,(b) in cleaning of, dust, settling ,or filtering ,chambers or apparatus; , ~ c), in 'cleaning the cylincl,ers, including the ,q,pffe,-: cyl\D.ders, orothe,rparts of the"caroing "maiihii)e' bY,·m.eiins,.of hah'd-strickl~~;, and ,',' . .' '. '" . .,"- - " .,' --,' - - , . :;'(d) ili filling, beating 01' levelling ,in the manu- facture or repair of insulating mattresses, " '91'l'rOte-bfi,;eequij"ti,e,it.,,':,'TII';reshaUbeprovided and,maintained for the rise ,otallpersons employed in the Cle"itning of dust settling and filtering Chit1ll­ bel's;' 'tUnnels'and ducts;' suitable overalls and head coverings. " lO:'Prphibitionoj eraploym~t oryoung pe'l'sQn8;­ No 'per$on,who, isl>elow18 years $hallbe <.mlployed in or in connection with the manufacture of insu­ !ating mattresses, in mixing or blending of asbestos 'by hand; in 'sack cleaning, in chambers or apparatus for dust settling, or filtering,' in chambers containing loose asbestos, or in stripping or grinding the cylinders including the doffer cylinders or other parts of a carding machirie., ' 11. Medical examination. ~ (1) No worker shall be employed in any factory on any, of the processes specified in paragraph 1, unless he has been medi­ cally e:g:a1llined by the Certifying Surgeon and has been, declared fit ancl, has, been ,granted a certificate of fitness' in Form ~9. (2) ,Every worker employed oh any of the afore­ said processes on the date on which this Schedule comes into force shall be medically examined by the Certifying Surgeon ,within three moths of the said date. ,,1 (3) 'Every worker' employed on any of the afore­ said processes on the date on which this Schedule comes into (orce, Shau be"radio!Clgically eXlj,mjned by a qualified radiologist' at the cost of the occupier :SERIESi' No.5 and the standard' size ,Chest X~ray plate shall, be submitted to the Certifying Surgeon. for medical ,examin,atioil within three months of the said 'date. (4) Every wo~ker employed on any of the afore­ said processes shall be medically examined by the 'Certifying Sm'geon.at inte1'Vll1s ,of six months after the first medical examination conducted under ,sub­ ~paragra,phs (l)and C:,l)and radi()logicauy examined at an interval of 3 years after the first radiological examination conducted under sub-paragraphs (1), (2) and (3) : '" ' , "Provided that if,atany time the Certifying Sur­ ge01i is of the opinion that any person employed in the said processes is required to be radiologically examined by a qualified Radiologist, he may direct the occupier to arrange for ,such ~xaminationat his coSt and then tosuhID.it the standard size X-ray plate of the worker to ,the Certifying Surgeon. (5) A worker' already in employment and declared' ,unfit by the Certifying Surgeon shall not be allowed to work on any of the proceSses, specified in para­ graph 1, unless he has been re-examined medically and radiologically, and had been certified to be fit to work on the said proocess' agaili. (6) A 'worker declared to be unfit to work on any Of the' aforesaid' processes, may be employed on such other work 01' process as may be consid~red safe and as may"be' advised by the Certifying Surgeon: ' Provided that if, the Certifying, Surgeon, declares that a worker has' been completely incapaCitated 'and he is, 'not' fit to'beemployed"o~,any process, such' worker' shall 'not be allowed ',to 'continue to work oh any 'work or process. (7) ±h~, Certifyi~gSurgeon may direct that a 'worker may beX~rayed or he may be subjected to fllrther'eXaminationby'a specialist or to any' other examination, clinical, patholOgical or otherwise or that ,he should undergo a specified treatment, and it shall be the responsibility of, the occupier and manager to arrange for ,the, ;;pecified . examination and/or'treatmentand to bear all expenses thereof or in connection thereWith. (8) The Certifying SllrgeonshalI,after' each ~xamination grant a certificate in Fo'nn 29. (9) The manager shall maintain all the certificates in a proper register 'or file and shall produce all the certificates before an Inspector whenever demanded. (10) The manager shall maintain, the details of every me"dical, examination in Form 7 and the regis­ ter 'shan be. produced, before an Inspector whenever !iemahded. - ' sCHEDULE xv .HlIJldl.iI!g or. manipulation of col'l'OSive substaDces L Dejinitwns.-'- For thepurpqses of this Selle- dule~ ", , " (a) "corrosive operation" m~ans an~peration Of manufacturing,; storing, handling" processing, packingor,,1isingany corrosive subStance' in a facto9' ; and, , :;' '-(b) '''corrosive substance',' iD.C1udessUlphuric aci<j.;, .,nitric' "acid; ,hydrilcloricacid,' hydrofluoric ..n" 8~DMAY,1985 (VAISAKA 18, 1907) acid, carbolic acid, phosphoric acid, liquid chlorine, liquid bromine, anpnonia. or anhydrous liquid ammonia, sodium hydroxide or potassium hYilr9- xide or mixtures thereof, .or any other substance which the Government may by notification in the Official Gazette. specify to be a corrosive subs" tance. 2. Flooring; - The floor of every workroom of a factory in which corrosive operation is carried on shall be made of impervious, corrosion and fire re­ sistant material and shaH be so constructed as to prevent coHection of any corrosive substance. TIle surface of such flooring shaH be smooth a!ld cleaned as 'often as necessary and maintained in a sound condition, 3. Protective equipment. - (1) The occupier snal! provide for the use of aH persons employed in any corrosive operation suitable protective wear for hands and feet, suitable aprons, fll-ce shields, che­ mical safety goggles and suitable respirators. The equipments shaH be maintained in good order and shaH be kept in clean and hygienic condition by dis­ infecting them and also suitably treating them to remove the ill effects of any absorbed chemicals. The, occupier shall also provide suitable,protective creams and other preparations to' the workers wherever necessary. (2) The protective equipment and preparations provided shaH be used by tl\e persons employed in any corrosive operation. 4. Water facilities.- Where any corrosive 'opera­ tion is carried on, there shaH be provided as close to the place of such operation as poSSible, a source of clean water at a height of 210 centimetres from a pipe of 2.5 centimetres diameter and fitted with a quick acting valve so that in c.ase of injury to the worker by any corrosive substance, the injured part can be thoroughly flooded with water. Whenever ne­ cessary, in order to ensure continuous water supply, a storage tank having a minimum length, breadth and height of 210 centimetres, 120 centimetres and 60 centimetres respectively or such dimensions as are approved by the Chief Inspector placed at floor level shaH be provided· as the source of clean water. 5. Cautionary 'notice. - A cautionary notice in the foHowing form and printed in the language which majority of the workers employed understand, shaH be displayed prominently close tQ the place where a corrosive operation is carried out and where it can be easily and conveniently read by the workers. If any worker is illiterate, effective steps shaH be takell to explain carefuHy to him the contents of the notice so dis,Played. CAUTIONARY NOTICE DANGER Corrosive substances 'cause severe burns and va. pours thereof may be extremely llazardous. Use protective wears. m case of contact with corrosive substances im.' mediately flood the affected part of body witn plenty of water for at least 15 minutes. ' Cal! for medical' attentioll quickly. 199 6. Transport. - (1) Corrosive substances shallnot be filled, moved or carried except in containers and when they are to be transPQrted, the cOlltainers shaH be placed in crates of sound construction and of snfficient strength. (2) A container with a capacity of 10.0 litres or more of a corrosive substance shaH be placed in a receptacle or crate and then carried by more than one person at a height below the waist line unless a suitable rubber wheeled cart is ~sep. for the purpol\e; (3) Containers for corrosive substances shaH be cl!)arly labellEid as such. 7. Devices for hq.nating corr~ve sul>stances.­ (1) Suitable tilting or lifting devic.es shaH be used for emptying jar!!; carboys and other containers of corrosive substances. (2) Corrosive substances shall not be hanp.led by bare hands but by means ofa suitable scoop or other device. 8. Opening o{valves. - Valves fitted to containers holding a corrosive substance shall be opened with great care. If they do not work freely, they shall not be forced open. They shaH be opened by a worker suitably trained for the purpose. 9. Cleaning tanks, stills etc . ....; (1) In cleaning out or removing residues from stiHlI' or otl\er large chambers used for holding any corrosive substance, suitable implements made of wood or. other m:j.terial shaH be used to prevent pro(iuction of 8.rI\eniuretted hydrogen (Arsine). (2) Whenever it is necessary for' the purpose of Cleaning or other .maintenance work for any worker to enter chamber tank, vat, pit or other confined space wherl) a corrosive substance haP. been stored, all possiple precautions required ulJ.der Section 36 of the Act ~haH be taken to ensure the worker's safety. (3) Wherever pOSSible, before repairs are under­ taken to any part of equipment in which a corrosive supstance was handled, such equipm~nt or part thereQf shall be freed of any a(ihering corrosive substance by adopting suitable methods; , 10. Storage. - (1) Corrosive substances shaH not be stored in tl\e same room witl\Qther chemicals, such as "turpimtine, carbides, metallic powders and combustible materials and cynide salts as the acct­ dental mixing thereof may cause a reaction which is either violent or it may give rise to toxic fumeS and gllses. (2) Pumping or flHing overhead tanks, recepta­ cles, vats or other containers for storing corrosive. substances shaH be so arranged that there is no possibility of any corrosive substance overflowing and causin&, inj~ to any person. (3) Every container having a capacity of twenty Iitres or more and every pipeline, valve and fitting \lsed for storing or carrying corrosive substanc~s shaH be thoroughly examined every year for finding out any defects, and the defects so found out shaH be rectifieP. forthwith." A register shaH be maintained of .every: such examination made and shaH be pro­ duced before the mspector whenever required. 170 11. Fire extinguishers and fire ~ighting equip­ ment - An adequate number of sUItable types of fire ~xtinguishers or other fire fighting equipments, depending on the nature of ~hemicals store~, shall be provided. Such extinguishers ?r other eq~Ipment shall be regularly tested and refIlled. Clear lI.'struc­ tions as to how the extinguishers or other eqUipment should be used, shall be printed in the language which majority of the workers employ~d understand and shall be affixed near each extingmsher or other equipment. Sufficient number of workers shall be trained in firefighting methods. 12. Exemption. - If on an application made by the manager of any facto~ th~ Chie~ Inspector, is satisfied that owing to the exceptional cIrCumstanCeli!, or the iufrequencyof thel?rrn:e8li! o~ .for any other reason to be reCorded by hIm m wntmg, all or any of the provisions of this Schedule are not considered necessary for the protectio~ ?f the 'perso~~ emplo~ed therein, he mayby a certifIcate m wntmg, whIch he may at any time revoke, exempt the factory frol!1 such of the provisions and subJect to such condi­ tions as he may specify therein; SCHEDULE XVI Processing, of Cashewnut 1. Applwation.- This Schedule s?all apply to .all factories in Which roasting, scrubbmg and shellmg of cashewnuts or extracting oil from cashewnuts or cashewnut shells are carried on. 2. Prohibition of employment of women and young persons. - No woman or person below 18 y:e~rs shall be employed in any of the processes specifIed in paragraph 1 except in shelling of ro \~tedcashew­ nutS. 31. Protective clothing arid iquipment. ~ The occu­ pier shall provide and maintain for the use of all persons . employed in roasting and scrubbing of cashewnuts or extracting oil from casliewnuts or cashewnut shells- (a) suitable rubber or washable leather gloves; (b) suitable type of impervious aprons with sleeves to cover body down to knees and shoulders; and (c) suitable type of footwear to afford protec­ tion to feet and legs agaiI).st cashewnut oil; and for the workers employed in caahewnut shelling either- (d) a protective ointment containing 10% of . shellac; 55% of ' alcohol, 10% of sodium perborate, 5% of carbitol and 20% talc; or (e) sufficient quantity of kaolin and coconut oil; and . (f) any other material or equipment which the Chief Inspector of Factories may deem .. to be necessary for .the protection of the workers. . - ., 4. Use of prot~ctive clothing and equipment. "­ Every person employed in processes specified in paragraph 1 shall make use of protective clothing and equipment supplied and arrangements shall be made by the. occupier to supervise its use, mainten- ance 'and cleanliness.' . . SERIES I No. 5 5. Disposal of shells, ashes, or oil of cashewnut. - (1) Shells, ashes or oil of cashewnut shall not be stored in any room in which workers are employed and shall be removed at least twice a day to any pit or enclosed place in the case of shel1sand ashes and to closed containers kept in a separate room in the case of oil. (2) No worker shall be allowed to handle shells or oil of cashewnuts without using the. protective cloth­ ing or equipment provided under paragraph 3 above. 6. Floors . of workrooms. - The floor . of every workroom in which processes specified in para­ graph 1 are carried on shall be of a hard material so as 'to be smooth and imperviOUS and of even sur­ face and shall be cleaned daily, and spillage of any cashewnut oil in any workroom shall be washed with soap and cleaned immediately .. .' 7. Seating accommodation. - Workers engaged in shelling of cashewnuts shall be provided with ade­ quate seats or work benches which shall be clealled daily. . 8. Restrooms. - (1) There shall be provided' and maintained for the use of all persons employed in processes specified in paragraph 1, a suitable rest­ room furnished with sufficient tables and chairs or benches. . (2) Separate lockers shall be provided where food, etc; shall be stored by workers before it is consumed in the restroom. . 9. Food, drinks, etc. prohibited in workrooms.­ No food, drink, pan, supari or tobacco shall be brought or consumed by any worker in any room in which processes 'specified in paragraph 1 are carried out and no person shall remain in any such room during interyals for meals or rest; 10. Washing facilities. - Where roasting, scrubb­ ing and shelling of cashewnuts or extracting oil from cashewnuts or cashewnut shells is carried on, there shall be provided and maintained ina clean state and good repair washing facilities, with a sufficient supply of soap, coconut oil, nail brushes arid towels at the scale of one tap or stand pipe for every 10 workers, and the taps or stand pipes shall be spaced at a distance not less than 1.2 metres apart. . ' .' 11. Time allowed for washing.:'- Before each meal and before· the end of the day's work, at least ten minutes, in addition to the regular meal times, shall be allowed for washing, to each person employed in processes .specified iIi paragraph 1 •. 12. Smoke or gas produced by roasting cashew­ nuts. - Where smoke or gas is produced in the ope­ ration of roasting, provision shall be made for re­ moving the smoke orgas' through a chinmey of sufficient height and capacity or by such other arrangements, as' may be necessary to prevent the gas or smoke escaping into the air or any place in which workers are employed. 13. Storage of protective equipment. - A suitable room or a portion of the factory suitably partitioned off,shall be provided exclusively for.. the storage of all the protective equipment supplied to the workers and no such equipment shall be stored in any place other than the rooni or places so provided. 3RD MAY, 1985 (VAISAKA 13,190"1) 14. Medical examination. - (1) Every pers9n em­ ployed in processes specified in paragraph 1 shall be examined by the Gertifying Surgeon once in every three months, or at such other intervals as may be specified in writing by the Chief Inspector of Factories on a 'day of which due notice shall be given to all concerned. The Certifying Surgeon shall examine and certify the workers in the premises of the factory. (2) Every person employed shall present himself at the appointed time ,for examination by the Cer­ tifying Surgeon as provided in sub-paragraph (1). (3) A health register in Form 7 containing the names of all persons employed in the process spe­ cified in paragraph 1 shall be kept. (4) The Certifying , surgeon ,'sha:!l record the results of the examination againSt the name of each worker in the health register., (5) No, person' whose services have b€.en sus­ pended on health grounds shall be employed in any process specified in paragraph 1, without the written sanction from the Certifying Surgeon duly entered in the health register. (6) ,The occupier shall appohtt a person trained in' first aid who shan inspect daily the hands and feet of the persons employed in processes specified in paragraph 1. The occupier shall keep a record of such inspections in a register in a form approved by the Chief Inspector and any cases of blistering shall be brought to the notice of the Certifying Sur­ geon who shall direct them for such treatment as may deem to be necessary. ' . , (7) 'The first'ald box shall also con.tain' Burrow's solution 1 to 20 and aqueous solution tannic acid 10% for treatment of cases of dermatitis: 15. Exemption . ....:..: The' Chief Inspector may grant exemption from the operation of any of ,thpse pro­ visions if he is satisfied that their observance is not necessary for safeguarding the health of the workers. ' SCHEDULE XVII Compression of oxygen and hydrogen produced by electrolysis of waillr or by ~ iron process 1. Definition. - For the purposes of thil; SchedUle "compression of oxygen and hydrogen" means any process by which oxygen or hydrogen is manufac" tured or evolved by electrolytic process or by steam iron process. ' " 2. Application. -,- This Schedule applies in respect of factories or any part thereof in which the process or compression' of oxygen and hydrogen is carried on. 171 4. Testing of purity. - (1) The purity of oxygen and hydrogen shall be tested bya competent person at least once in every shift at the following .posts: - (a) in the electrolysis roolll; (b) at the gasholder inlet; and (cJ at fue suction end of the compressor: Provided, however, that if the electrolyser plant is fitted with automatic recorder of purity of oxygen and hydrogen with alarm lights, it shall be' suffi­ cient if the purity of gases is tested at the suction end of-the compressor only. - (2) The purity figures obtained as a result of the test shall be entered in a, register and signed by the persons carrying out such tests. " , .' " , ' 5. Restriction as'to the cOmpression, ~,The'oxygen, and hydrogen gases shall notbe compressed if their purity as determined under paragraph ,4 above falls below 98% at anytime. ,',. 6., Limit switch for gashoT.diJr. - The bell of any gasholder shall not be permitted to, go within ,30 centimetres of its lowest 'position whim empty and a lImit switch shall be fitted to the gas holder in such manner as to switch off the 'compressor motor when the limit is reached. 7. Provision, of negative pr~8Ure switch • .,- In addition to the limit switch in ,the gasholder,a sen­ sitive negative pressure switch shall be provided in or adjacent, to the suction main ,for' hydrogen, close to the gasholderand between the gasholder .and the hydrogen compressor, to switch off the compressor motor. in the event of the gasholder being emptied to such an extent as to cause-vacuum. 8. Purity of raw mat~l . ...:.... The water and caustic soda used for making lye shall be . chemi­ cally pure within pharmaceutical limits., 9. Precautions against reversdl of polarity.­ Electx:ical connections at the electrolyser cells and at the electric generator terminals shall be so cons­ truc,ted as to preclude the possibility of wrong con­ nections leading to the reversal. of polarity and in addition an ,au~omatic device $hall be provlded to cut off power ill the event of ,reversal of polarity , owing to Wrong connections ,either at the switch board or the electric generator terminals. 3. Situation of Electr61yser Plant roorJi, etc.­ The room in which electrolyser plant is installed shall be separate from the plant for storing and compressing oxygen and hydrogen. The room in / which electric generator and the distributio~1 panel are installed shall not communicate with any other room in which any process is carried on. • 10. Colouring of gas pipes. - OXygen and hydro­ gengas pipes shall be painted with distinguishing colours and in the event of leakage·.at the joints of hydrogen gas pipe, the pipe and 'storage 'system after repairs and reconnection earried' out as per para­ graph 13 of thisSehedule and in accordance with the provisions of ·rule 84 shall be purged of all air and gases' using a suitable- inert gas before drawing in hydrogen gas, Before drawing .in hydrogen gas in any new or, existing system which was not in use, every pipe,gas-holder or compressed gas vessel in the said system shall be purged of all air and gases I:>y using a suitable inert gas. 11. Use 'of flameproof fittings . ...:.. All electrical wiring and apparatus, wherever hydrogen gas is generated, compressed, transferred or stored,shall be of flameproof construction or enclos'ed in flame- 172 proof. fittings. and no naked light or flame shall be allowed to be taken either in the electrolyser room or where compression and filling of the gas,es' is calTied on an warning notices shall be exhibited in prominent places to that effect. 12. Pro1!-ibition qf lwt work. ~ No part of theelec­ trolyser plant or the gasholder or compressor shall be subje(lted to welding, brazing, soldering or cutt­ ing until steps have been taken to remove any ex­ plossive substance from that. part and render tltat part safe for such operations and after the comple­ tion of such operations no explosive substance shall be allowed to enter that part until the metal has Cooled sufficiently to prevent risk of explosion. 13. Repair, etc. to be done under 8UpervisiOn. ~ No work of operation, repair' or maintenancf> shall be undertaken except under the direct supervision of a pe1'l!on who, by his training, experience and know­ ledge of the necessary precautions against risk of explosion is competent to supervise such work;, No electrict generator after erection or repairs shall be switched on to the electrolysers unless the same is certified by competent persons under whose direct supervision, erection or repairs are carried, on to be in a safe condition and the terminaIs have been checked for the polarity as required by paragraph 9. 14. Examination of the plant. ~ Every part of the electrolyser plant and the gas-holders and com­ pressor shall be inspected, checked and' overhauled in accordance with a regular schedule maintailled by the Manager complying with the instructions of the competent person mentioned' in paragraph 13, Every defect noticed shall be rectified forthWith. SCHEDULE XVUI Process of extracling oils and fats from vegeta,ble and animal sources in solvent extraction plants 1. Definitions. ~ For the purposes of this Sche­ dule~ (a). "solvent extraction plant" means a plant in which the process of extracting oils and fats from vegetable and' aninlal sources by use of solvents is carried on; (b) "solvent" means an iuflantmable liquid such as pentane, hexane and heptane used for the recovery of vegetable ons; , (c) "flameproof enclosure" as applied to elec­ trical lIl<lchinery or apparatus means an enclosure that will withstand, when covers or other access doors are properly secured, an internal explosion of the inflammable gas or Napour which may enter or which may originate inside the enclosure without' suffering damage and without communi" cating internal inflantmation (or explosion) to the external inflantmable gas or vapour; (d) "competent person" for the purpose of this Schedule shall be at least a Member of the Insti­ tution of Engineers (India) or an Associate Mem~er of. the said Institution with 10 years experlence m a responsible position as may be approved by the Chief Inspector: . Provided t~at a graduate in mechanical engineer­ mg or chemlcal technology with specialised know­ ledge of oils and i fats and 'with a minimum 8JiilUE8 1 No,fi experience of 5 years in a solvent extraction plant shall also be considered to be a competent, person: Provided further that the Government may accept any other qualifications which in its opinion are equivalent to the qualifications aforesaid. 2. Location and layout. ~ (1) No solvent extrac­ tion plant shall be permitted to be constru~ted or extended to within a distance of 30 metres from the nearest residentiai locality. (2) A 1.5 metres high contimlOus wire fencing shall be provided around the solvent extraction plant upto a minimum distance qf 15 ll1etres from the plant. (3) No person shall- be allowed to carry any matches or an open flame or fire inside the area bound by the ftlncing. (4) Boiler houses and other buildings where open flame processes are carried on shall be located at least 30 metres from the solvent extraction plant. (5) If godowns and preparatory processes are at a distance of less than 30 metres from the solvent extraction plant, these shaIl be at least 15 metres distance from the plant, and a continuous barrier waIl of non'combustible material 1.5 metres high shall be erected at a distance of not less than 15 metres from the solvent extraction plant so that it extends to at, least' 30 metres of vallour travel around its ends from the plant to the possible sources of ignition. 3. Electrical installations. ~ (1) All electrical motors and wiring and other electrical equipment installed or housed'in solvent extraction plant shall be of flameproofconstructiC:lll. (2) All metal parts of the plant and building including various tanks and containers where sol­ vents. are sto;ed or are present and all Parts of electrlCal eqUipment not required to be energised shaIl be properly bonded together and connected to earth so as to avoid accidental rise in the electrical potential of such parts above the earth potential. 4. Restriction on smoking. - Smoking shall be strictly prOhibited within 15 metres distance from solve~t ~xt.raction, plant. For this . p\ll'Pose, "No Smokmg' SlgnS shall be permanently displayeg in the area.' '.. " '. 5. Precautions against friction. ~ (1) AIl tools 3:n<l: equipment including ladders, !lha,ini; and other I~tmg tackle required to be used in solvent extrac, bon plant shall be of non-sparking type. . (2) No machinery or equipment in solvent extrac­ !lOn plant shall be belt driven unless the ,belt used IS of such a type that it does not permit accumula­ tion of static electricity to a dangerous level. . (3) No person shall be allowed to enter and work m the solvent extraction plant if he is wearing clothes made of nylon or such other fibre that can generate static electrical charge or wearing' foot­ wear which is likely to cause sp~ks by friction. 6. Fire fighting apparatus. ~ (1) Adequate number of portable fire, extinguishers suitable for ~e against iuflammable liquid fires shall be pro­ Vlded m the solvent extraction plant. 3RD MAY, 1985 (VAIBAKA 13,1907) (2) An automatic water spray sprinkler system on a wet pipe or open-head deluge system with sufficient supply of storage water shall be provided over solvent extraction plant and throughout the building which is hoUsing such a plant. 7. precautions agaiJn8t power failure. - Provi­ sion shall be made for the automatic cutting off of steam in the event of power failure and also for emergency overhead water supply for feeding water by gravity to condensers which shall come into pillY automatically with the power failure. 8, Magnetic separatOrs. - Oil cake shall be fed to the extractor by a conveyor through a hopper and a magnetic separator shall be provided to re­ move any pieces of iron during its transfer. 9. Venting. - (1) Tanks contaiuing solvents shall be protected with emergency venting to relieve excesSive internal pressure in the. event of fire. (2) All emergency relief vents shall terminate at least 6 metres above the ground and be so located that vapours will not re-enter the building in which solvent extraction plant is located. 10. Waste water. - Process waste water shall be passed through a flash evaporator to remove any solvent before it is discharged' into a sump. which should be located within the fenced area but not closer than 8 metres to the fence. 11. Ventilation. - Tbe solvent extraction plant shall be- well ventilated and if the plant is housed in . a building, the building shall be provided with mechanical ventilation with provison for at least six air changes per hour. 12. Rousekeeping. - (1) Solvent shall not be stored in an area covered by solvent extraction plant except in small quantities which shall be stored in approved safety cans. (2) Waste materials such .as oily rags, other wastes and absorbants used to wipe off solvent and paints and oils shall be deposited in approved containers and removed from the premises at least once a day. (3) Space within the solvent extraction plant and within 15 metres from the. plant shall be kept free ~rom any combustible materials and any spills of oil or solvent, shall be cleaned up imme- distely. . . 13. Examination and· repairs. - (1) Tbe solvent extraction plant shall be examined by the competent person to determine any weakness or corrosion and wear once in every 12 months. RePort of such examination shall be supplied to the Inspector with his observation as to whether or not the plant is in safe condition .to work. (2) No repairs shall be carried out to the machi­ nery or plant except .under the direct supervision of the competent person. . (3) .. Facility shall be provided for purging the plant wit!t inert. gas before opening the same for cleanmg or repairs and before introducing solveD;t thereiI). after repairs. . 173 --- ----------------~ _ 14. Operating personnel. - Tbe operation of the plant and machinery in the solvent extraction plant shall be in the charge of such duly qualified and trained persons as are certified by. the competent person to be fit for the purpose and no other person shall be allowed to operate the plant and machinery. "15. Employment of women and young per80n8.­ No . woman or person' below 18 years shall be employed in the solvent extraction plant. 16. Vapoor detection. - A suitable type of flame­ proof and portable combustible gas indicator shall be . provided and maintained in good working order and a schedule of routine sampling of atmosphere at. various locations as approved by the Chief Ins­ pec~r .shall be drawn out and entered in a register mamtained for the purpose. 17. Exempticn. - If in respect of any factory, the Chief Inspector is satisfied that owing to the exceptional circumstances or infrequency . of . the processes or for any other reairoDs, all or any of the provisions of this schedule is not necessary fOr th~ protection of the workers in the factory, the Ch~ef Inspector may,. by a certificate in writing, whlCh he may revoke at any time, exempt such factory from all or any of such provisions' subject to such conditions as he may specify therein. SCHEDULE: XIX Manufacture or ma.nipub~of. manga.neee·.·· and its Compounds 1. Application. - Tbis Schedule shall apply to every factory in which or in any .part. of which . any manganese process is carried on.·.., '. 2. pefiniti0n8. - For the purpo~ of this .Sche- dule-,.. .' ' .' ,. (a) "llUUlganese process" me~ prooesmng, manufacture or manipulation, of ... manganese or any compound of manganese or any ore or any mixture containing manganese; . (bY/'first employment" means first employ­ ment m any manganese processa.nd includes also . .~-employment in any manganestfprocess' follow­ mg any cessation of employment for a continuous period exceeding 3 calendar months; (c) "manipulation" means mixing, blending, . filling, emptying, grinding, sieviilg,drying.· pack­ ing, sweeping or otherwise handling of' manga~­ nese or a· compound of . manganese,.' or any ore or any mixture containing manganese; and . (d) "efficient 'exhaust venti1ation'~ means loca­ lised ventilation effected by mechanical means for the removal of dust or fume or mist at its source of origin so as to prevent it from escaping into the atmosphere of any place where any work is carried on. No draught shall be deemed to be efficient which fails to remove. the dust or fume or mist at the point where. it is· generated and, f~sto prevent it from escaping into and spreading into the atmosphere of;a work place. ' ... 3 .. [sOlation of a prOCe88. - EVery-manganese proce:m which -may give rise to dust, vapour or mist containing mangailese; shall be carried on in a 174 totally enclosed system or otherwise effectively isolated from' other processes so that other plants and processes and other parts of the factory and persons employed on' ather processes may not . be affected by the same. 4. Ventilation of process. - No process in which any dust, vapour or mist containing manganese is generated, Shall be. ,carried out except . under an: efficient exhaust ventilation which shall'l:le applied a~ near to the point of generation as practicable. . 5. Persoi1al protective' equipment; -(1) The occupier ·of the factory shall provide and maintain in good and clean condition suitable overalls and head'coverings for all persons employed in any manganese process and such overalls . and . head coverings sball be worn by the persons while work. ing on' a manganese process. (Z) The occupier of the factory Shall provide suitable reSPiratory protective equipment for use by Yfor~ersin. emergency to prevent inhalation of dusts, fumes or mists. Sufficient number of com. pletesets of' sUch equipment shall always be kept nea:r, the worK place and the same shall be properly mamtained and kept always ina condition to be used readily. (3) The occupier shalCprovide and maintain for the use of all persons employed, suitable accomma. dation for the storage of personal protective equip. ment . and . make adequate arrangements for. ~lean- ing iirid 'maintenance thereof. .' ., " , ,6. Prohibition relating to women and yowng pers0n8,-No . woman or person below 18 years shall: be employed or permitted to work' in iiriy manganese proceSs. ..' . , 7, Food, drinks, etc. prohibited in the workrooms. - No food, ~k, pan and supari or tobacco shall be aIlow~d to ~brought into or consumed by any w?rker ~ any. workroom in which any manganese process Is carried on.' . 8. Messroom. - There shall be provided and Ir!~j:;l.ined for .the use of the persons employed in a ,1lll\Ilganese process a suitable messrooin which !!ll~1 he furnished with· sufficient tables and bEinclles aJld adequate 1lleans for.,warming .offood. The messt:0OIn flhall be placed under the .. charge of a' responsIble person and shall be kept clean. ~ 9.. W~hing. and bathing facilities. -The follow­ mg was?m~ and .bathing facilities Shall be provided andmamtained m clean state and in good repair for the' use of all persons eniployed in inanganese process: - . '. .' (a) 'A wash place under cover with clean towels,: soap and' nail bruShes and with at least one stand pipe for every ten such persons having con§lta.nt supply of water. •• . (b) l?O' per.~nt of th~. stand pipes provided .'. under Item (l\)above may be located in bath­ . 'rooI!1 where water Shall be made available during ~~~Wtb:~g~~ of the factory and for .one . (c) Clean t(lwels to be provided individually to each worker and also a supply of hot water if 'soorqeredby, an Inspector.. .' . SERIES l;Na. 5. (d) In addition. to taps mentioned under item (a) one s~nd pipe in which warm wawr is made av!lilable to be provided on each floor. 10. Gloakroam.- If the Chief Inspector so requi- res, there shall be provided and maintained for the use of persons employed in manganese process, a cloakroom for clothing put off. during working hoUrs with adequate arrai,lgemell.ts f()r drying the' clothirig. . . 'il.0autionaryplacard andjnstructions. - Cau' tionary notices in the forin specified in 'appendix . and printed in the language o( the majority of the workers employed, shall be affixed ill prominent places in the factory where they can be easily and conveuiently read. by the workers and arrangement shall be made by the occupier to instruct perio­ dically all workers employed in a manganese process regarding the health hazards connected with their duties and the best preventive measures and methods to be adopted to protect themselves. The notices shall always. be I!1a,intained in legible condition.' . 12. Medical'jacilities. - (1) Th" occupier of the factory shall appoint a qualified Medical Practitia. ner whose appointment Shall be subject to confir­ mation by the Chief Inspector .. The qualified Medi­ cal Practitioner so appointed shall be called 'Ap' pointeq. . Doctor' . (Z) The occupier shall provide for the purpose of Medical .Examination a room at the factory pre­ mises for exclusive use by apwinted Doctor. The room so providd shall be properly cleaned, ade­ quately lighted,ventilated and, .furnished with a screen, a table (with writing materials), chairs and facilities, equipments, and instruments for examina­ tion . and investigation. Such facilities SbaIl be sub­ ject t~the app,,?val by the Medi~al InSpector of Factones. (3) The appointed Doctor Shall carry out pre­ employment examination of. every person intended t() be employed in manganese process, All workers employed in mallganese process shall be exanIined by the.appointed Doctor at an interval not exceed­ ing three months and records of such examina­ tions s~all be maintained in a form approved by the Chief Inspector' and Shall· be' made available to any Inspector on demand; (4) The occupier and the appointed Doctor of the factory shall notify. forthwith any case or suspected case of poisoning by manganese to the Chief Inspector and Medical Inspectpr of Factories. 13. Me~ical examination. - (1) Every person empl~yed m .a manganese 'process shall be medically exaII.1me~ by the Certifying SurgeOn within 14 days of hIS fIrst employment and thereafter at intervals of not more than three' months . {Z)If a person niedically exanIined is found fit fo: employment on a manganese process"the Certi­ fymg Surgeon, shall grant a certifiCateoffitnesi!in Form 28, which Shall be kept in tlje custody of th.e manager of the factory. The certificate 'shall be readily produced by the manager wneneVer require(I by any Inspector, and the person gninted such a ,certificate shall be provided with' a token made of 3RD MA¥j~985 (V AISAKA 13'2,~1c:::.90~7~) ___ , ____ _ 175 ------------------ metal .with the number of the certificate insc~bed t.BereOri and the said persOn shall always catTy the said token on the person while at work. (3) . If ai>erson is found unfit f<>r Work in any manganese ·.·ProceBll, the certifying surgeon shall grant a certificate to that effe~t and such,. pElrson shall not be allowed to work ill· any manganese process· . (4) (a) If the Certifying Surgeon finds that any worker who had been granted a certificate of fitness at . a previous medical examination is no longer fit to be employed on any manganese process, he may revoke the· previous certificate and no pers<m whose certificate of fitness has been so revoked shall be allowed to work· on: any manganese process. (b) The certifying Surgeon may require ~ch person to be produced before him for fresh meQi~al examination after such period as he may specify ill writing on the revoked certificate and· duly entered in the 'health register. (5) If· the Certifying Surgeon is of the opinion that a person had become permanently. unfit for employment on any manganese process, he shall make an entry to that effect in the certificate and also in the health register and no such person shall be allowed to work in any manganese process. (6) If the Certifying Surgeon is of the opinion that any special expert examination or test is neces­ sary for a propel' diagnosis in a doubtful case, he may direct the manager and/or the occupier to get. the worker examined by such expert, or to get.such tests carried out· as may be specified by him' l!-nd the manager or the occupier as the case may be, shall comply with the direction given within a speci­ fied time and produce the report of the examination or test as the case may be, before the' Certifying Surgeon. . (7) If the Certifying Surgeon is of the opinion that any person is not fit foremploymellt .in any manganese process but is fit to be employed on any other work he may advise the manager or the ~upier to employ the said person on such other job as may be safe for him. The Certifying Surgeon may also advise the worker to undergo such treat­ ment . as he may consider necessary. (8) If any person has any doubt regarding the diagnOSiS or decision of the Certifying Surgeon he may make an appeal to the Chief Inspector and the Chief Inspector may refer the case t() the Medical Inspector of, Factories or to a Medical Committee constituted by him for this purpose of which the Me­ dical Inspector of Factories shall be a member. The decision of the Medical Inspector or the· Committee as the case may be, shall be final in the matter. 14. ExemptWn. - If in respect of any factory, the Chief Inspector is satisfied that pwing to any ex­ ceptional circumstances, or infrequency. of the process, or for any other reason, application· of all or any of the provisions· of this Schedule is not ne­ cessary for the proteption of the person employed in such facto~ he. may, by .an order in writing which he may at his~lscretionrevoke, exempt such factorY from all or any of the provisions on su~h conditions and for such period as he'may specify in the said order. . APPE:NDIX ... CAUTIONARY NO',I'IOE Manganese and niangaltese· coin_cis 1. Dust fumes ·and mists of ,manganese and . its compounds .. are toxic when :inhaled or when ingested. 2.· Do· not consume food or drink near the work place •. 3. Take a good w~sh befor~ takingme~, .-. ~ , .. ' '-" 4. Keep the·Working area clean.' 5. Use the protective clothing and equipment provided. 6. When required. to work in,situation where dust, fumes, or mists are likely to be inhaled, use reS­ pir!J.tory protective equipment provided for the purpose: 7.. If you get severe headaches, prolonged sleepless­ ness or abnormal sensations on the body, report to the manager who· would make arrangements for YQur .examination- and ,treatment .. SCHEDULE· XX ManufOOtoreor manipulation· of daDge1'Ous .. ' . . peSticides 1, Application. _ This Schedule shall .apply in respect of all factories or any part thereof in which. the·process . of. mannfactur!3· qrIll;l.llipulation .. of dli.ngerous pesticide. hereinafter referred to as the said mitnufacturingprocess is. c.arried on. 2. Definitions. - For the purpose of this Sche­ dule- . (a) "dangerous pesticides" ·lileans ll!ly product proposed. or usedfol'-' controlling, dffitroying or repelling . any pest or • for 'preventing'· gto'wth or mitigating effects of growth of such pests includ­ ingany of its formulations which is considered toxic as are included in thelist'to Appendix I to this Schedule and also as covered under the In­ secticides Act, 1968 and the rules made thereunder and any other product, as may be de..,lared as a dangerous pesticide from time to time by the Chief InspectRr in writing; . (b) "manipulation" includ~s mixing, blending, formulating, filling, emptying; packing or other- wise handling; .' :T . ' . (c), "efficient exhaust draught" means localised • mechanical. ventilation for removal of smoke, gas, vapour, dust, fume or mist so as to prevent them from escaPing into the air any work room in which work is carried on.!'r0 . exhaust, draught . ·shall be considered efficient if it fails to remove , smoke. generated at the point where such 'gas, fume, dust, vapou~ or mist.originates from .the . process ;:. .... (d) . "first employment" means· first employ­ ment m any manufacturing prQcess to which this Sched~e appli~s ~dshall ~P 4l\!lud~re-employ. ment· m· the sal<imanufactunng. process· following any ceSsation of emp!oymentfor. a continuous period exceeding three calendar months; lind 176 (e) "suspensi.on" means suspension of persons from employment in any process wherein a dan­ gerous pesticide is manipulated, by written certi­ ficate in the health register in F.orm 7 signed by the Certifying Surgeon who shall be competent to suspend all persons employed in such process. 3. InstructWn to Worker8. - Every worker on his first employment shall be fully instructed· ab.out the pr.operties including dangerous properties .of the chemicals' handled in the said manufacturing process and the hazards involved thereunder. The employees shall also be instructed about the measures to be adopted to deal with any emergency;' Such instruc­ tions shall be repeated periodically. 4. Cautianary notice. and placards. - Cautionary notices and placards in the form specified in appen­ dix IT to this Schedule and printed. in the langnage .of the majority .of the w.orkers shall be displayed in all work places in which said manufacturing pro­ cess is carried .on s.o that they can be easily and . conveniently read by the w.orkers. Arrangements shall be made by the occupier and the manager of the factory to periodically instruct the workers re­ garding the health hazards arising in the said manu­ facturingprocess and the methods .of protection therefrom. Such notices shall include brief instruc­ ti.ons regarding the periodical clinical tests required to be undertaken for protecting health .of the workers. . 5. ProhibitUm relating to employment of women or young persons. - No woman .or person below 18 years shall be employed or permitted to w.ork in any r.oom in which the said manufacturing process is carried .on Dr in any room in which dangerous pes­ ticide is. stored. 6. Food, drilnks and smoking prohibited. - (1) No food, drink, tobacc.o, pan .or suparishaU be brought into or consumed by ani worker in any workrDom in which the said manufacturing process. is carried .out. (2) Smoking shall be prohibited in any workroom in which the said manufacturing process is carried out. . 7. Protective clothing and protective equipment. _ (1) Protective clothing consisting of l.ong pants and shirts .or overalls with long sleeves and head cover­ ing shall be pr.ovided for all workers employed in the said manufacturing process. (2) (a) Protective equlpment consisting .of rubber gl.oves, gum boots, rubber aprons, chemical safety goggles and respirators shall be provided f.or all w.orkersemployed in the said manufacturing process. (b) Where the pesticides contain .oil gl.oves, boots and aprons used shall be made fr.om synthetic rubber. (3) . Protective clothing and equlpment shall be w.orn by the w.orkers supplied with such cl.othing and equipment. (4) Protective clothing and equlpment shall be washed daily both inside and outside if the w.orkers handle pesticides cont~ining nicotine .orphosph.orous and shall be washed frequently if they handle .other pesticides.' . '. . SERIES I No. 5 (5) Protective clothing and equlpment shall be maintained in good repair. . 8. Floor8 and workbenches. - (1) Floors in every w.orkroom where dangerous pesticides are manipu­ lated shall be .of cement· or other impervious mate- rial giving a smooth surface.' . (2) Fl.oors shall be maintained in good repair and shall. be pr.ovided with adequate slope leading to a ~in and th.oroughly washed .once a day with hose pipe. . (3) W.ork-benches where danger.ous pesticides are manipulated shall be made of smooth; n.on-absorbing material preferably stainless steel and shall be cleaned at least once daily. .' 9. Spillage and waste. - (1) If a dangerous pes­ ticideduring its manipulati.on splashes or spills .on the workbench, floor or on the pr.otective clothing w.orn by a w.orker, immediate action shall b" taken f.or th.orough decontaminati.on of such areas .or articles. (2) Cloth, rags, paper or .other material soaked ?r soiled., with danger.ous pesticide shall be deposited m a s~table receptacle with tight fitting c.over. 9<>ntammated waste shall be destroyed by burning It at least once a week. GhSuitable deactivating agents, where aVailable shall be kept in a readily accessible place f.or us; while attending t.oaspiUage. (4) Easy means of access shall be pr.ovided to all pam;; .of the plant f.or cleaning, maintenance and reprurs. . 10. Empty c.ontainers used f.or d4ngerou.~ . pea«­ ciiles. - Containers used f.or dangerous pesticides shall be th.oroughly cleaned .of their contenta and treated with a deactivating agent before being dis- carded .or destr.oyed. ..' . 11, Manual handling. - (1) A dangerous pestiCide shall not be requlred .or all.owed to be manipulated by hand except by means .of a l.ong handel scoop. (2) Dii-ect c~n~t .of.any. part of the. b.ody with a dangerous pestICIde durmg Its manipulati.on shall be av.oided. '12. Air space. ~In every room in whiclIthe said manufactUring process is carried .on there shall be at least 15 ~ubic me1:ref? .of air spad, excluding any spa?e .occupIed by machmery equipment . .or any .other artIcles! for ~y. person empl.oyed therein, and in c.omputing this rur space no height over3.5 metres shall be taken into account. . 13. Ventilation. - (1) In very wDrkroom .or area Where a ~g;erous pesticide is manipulated, ade­ quate ventIlati.on shall be provided at all times by the circulati.on of fresh air. (2~ ~nless the process iscompletelyencl.osed in an ~rtigh~ chrunber the f.oll.owing .operations during manIpulatIon !If a danger.ous pesticide shall not be undertaken wIth.oUt an efficient exhaustqraught_ . (3;). emptYing.a container h.olding. a dangerous pesticIde; . . . (b) blending a dangerous pesticide; 8~WMAY; 1985 (V AISAKA ~8~,~1:.:9::...07~),---______ _ 177 (e) preparing a, liquid or powder formulation containing a dangerous pesticide; and ,;(d)".,c;h~ging 9rfiljing a ~gerous pe~ticide into ' a: ,colltainer;, tank' Ilopper' . or machine 'or small sized containers. '(3) In the event of a failure of the exhaust draught as provided above the said operations shall be stopped forthwith. ' , 14; Time allowed for washing. - (1) Before each meal arid before the end of the day's work at least ten ,minutes in addition to the regular,rest intervals ~hall be1ll1<;wed ~or Wll$hingto each,w<;r!<er tWga,ged m the mampulatIOn of dangerous pesticIde. ' (2) ~ery worker engaged in the ,maniplllation of dan~rous pesticides shall have a thorough wash before consuming any food and' also at the ,end of the day's work. 15. Washing and bathing facilities. '-- (1) There shall be provided and maintained' in a clean state and in, good repair for ,the 'use of all workers em­ ployed in the factory where the said manufacturing process is carried on, adequate washing and bathing places having a constant supply of water 'under cover at the rate of one such place for every 1) persons employed. ' ' , , (2)' The washing places shall have standpipes place at intervals of not less than one metre. " '(3) Not less than one half of the total number of washing places shall be provided with bathrooms., (4) Sufficient supply of clean towels made of suitable 'material shall be provided: Provided that such towels shall be supplied one for each worker if so ordered by the Inspector. " (5) Sufficient supply ~,soap and nail brushes shall be provided. ',' , " 16. ,Oloakroom. - There shall be ,provided and maintained for the use of, all workers employed in the factory where the said manufacturing process is carried on ~ " " , (a) a cloakroom for clothing put off during working hours with adequate arrangements for , drying the said clothing, if wet; and " (b) s~parate and suitable arrangements for the' storage of protective clothing provided ,in para- graph 7. ' 17.'Mes8Toom.- (1) There shall be provided and maintained for'the use of all workers employed in !he factory in which the said manufacturing process IS carried on and remaining on the premises during the rest intervals; a,. suitable messroomwhich shall be furnished with - ' (a) sufficient tables a~d benches with back rest, and ' , (b) adequate means for warming food. , (2) The messroom shall\>e placed under, the charge of a responsible person and, shall be kept clean. , ,,18. il!anifij'latymnot to ,be undertaken. - Manu­ fa.cture or manipulation of a pesticide shall not be undertaken in any factory unless a certificate regard­ ing its dangerous nature or otherwise is obtained from ,the Chief Inspector: ' 19. Medical examination. - (1) (a) Every worker employed in the ,saidmanufa~turing process shall be examined by the Certifying Surgeon within seven days of the firste~ploylnent and, no worker shall be allowed to work uhless certified fit for, such em­ ployment by the Certifyhlg StU-geon. ' (b) Every worker employed in the said manufac­ turing process shall be re-elffimined'by the' CertifYing Surgeon at least once in every 3 calendar months. (c) Due notice shall be given' to the Certifying Surgeon and the concerned workers regarding the arrangements for exaniination~fworkers,employed in the said manufacturing process after obtaining the consent regarding the arrangement from the Certifying Surgeon., (d) A health register in Form 7 containing names of all workers employed in the said, manufacturing , process shall be maintained. '" (e) No person whose services have be,en suspen­ ded on health grounds shall be re-employed without written sanction from the Certifying'Surgeon ente­ ,red in or attached to the health register: . (~) The Chief ,hlspector }Ilay order suitable ?hmcal t~st or ~~~b,l to be catti~d out at specified mtervals 10 respect ~f'workers in"any factory where such manufacturing process il3 carried on. Charges for such test or tests shaIi be bO~e 'by the employer. 20. Medical facilities. - (1) The occupier shall engage .a qualified medical practi~!oller approved \>y the C!uef Inl!lpector Who" shl/.ll· examine and" when necessary treatontbe premises of the factory, all ~orkers who are employed in the said mallluactu­ nng process, for effects of excess,iveabsorption of the dange~oll~ p~sticides at least: once a week. ' , (2) ,The OCCUpiel' shall, make necessary arrange­ menst to ensure quick availability of qualified me­ dical practitioner in emergency. , . (3) The occupier shall provide medicines ahd an­ tidote15 a~d ~ther e9uipment required fOr treatment of excessIve ab\!Orption of dangerous pesticides. (4)'',~ec~f<'4l of such examinations and treatments' and test shall, be maintained in a :t;o.rm anproved by the Chief Inspector and shall be, made available to the Inspector for inspection. ' , (5) Every worker in any factory whereine said manufactu;IDg proce;;s ~ carried on, shall un~rgo the prescnbedexammatIons, 'tests 'and treatments. ~1. Exemption.- If in respect of any factory, the <:lnef ~spector ,is satisfied that owing to theexcep­ tional cIrcumstances or the iufrequency of the said manu~acturing process or for any otlf~reason which h:e shall r~ord in writing, all or~y of the provi- , slOn~ of thIS Schedule are not necessary for the pro­ tection .. of t~eworkers employed in'the said factory, he may by a certificate, ,in writing, exempt such factory,- ,from ,all or any of the provisions on such condition as he may specify therein. Such certificate may at any: .time.be revolted by the Chief InSpector after recording"hls reasons therefor. " " , .. . .. , .. _._- '-~-- 178 APPENDIX I Li»t of dangerou pesti_ Parthion Diazinon Hexaethyl tetraphosphate . Tetraethyl pyrophospllate ." Tetraethyl ditriopyroposphate Demeton (systex) . . Schradan (OMPR) Para-Oxon (E.600) Methyl Parathion Dimefox Sulphotepp EPN Nicotine or ita compounds .. Mercury compounds Methyl bromide Cyanides Chlordane Endrin Aldrin Dieldrin Texaphene Dinitro-o-cresol Arsenical comPounds . Cryolite PentachlorophenoL· APPENDIXU <lAlJTIONARY . NOTICE Inoecticides and peatI_ 1. Chemicals handled in this plant are poisonous substances. . 2. Smoking, eating' .' food .or . dririking, '. chewing tobacco in this area is prohibited. No food stuff or drink shall be brought in this area. 3. Some of these chemicais' may .be alll'iorbed through skin and may. cause poisoning., " . 4. A good wash shall be taken bef1re mllais.· 5. A good bath shall betaken at the end of the shift. ' 6. Protective clothing and eqUipment supplied shall be used wl),ile working in this area. 7. Containers of pesticides shall not· be used. for keeping food stuffs. 8. Spillage of the chemicals on any part of the body "or on the floor or work-bench shall be imme­ . diately washed away with water .. 9. Clothing conteminated due to splashing shall be removed immediately. . 10. Scrupulous cleanliness shall be maintained in this area. 11. Do not handle 'pesticides with bare hands, use scoops provided with handle. . 12; In case ofsicImess like nausea; vomiting, giddi­ ness, the manager should be informed who will make necessary arrangements for' treatment. • 13. All workers shall report for .theprescrlbe.d me­ dical tests ~gularly to protect their own health. SERIES I No.5 SCHEDULE XXI . . Mallllfacture, ha.udling and lISa.g8 of ben_ and substanceS contuming bemene 1. Application. - This Schedule shall apply in res­ pect of factories or. parts thereof il). which benzene or Ilubstancescontaining benzene are manufactured, handled or used. 2. De!i'niiions.-Forthe purpose of thisSche- dule- .. (a) "substances containing' benzene" means substancEOs wherein benzene. content. exceeds 1 per cent by volume; . (b) . "substitute" means a'. dlemical which is .harmless or less harmful than. benzene and can be used in place of benzene; (c) "enclosed system" means a system which will not allow' CljCape of. benzene vapour to the working atmosphere; and (d) "efficient exhaust draught" means localised ventilation effected by mechanical means for the removal of gases, vapour and dusts or fumes so as to prevent them from escaping into the air of any workroom. No draught shall be deemed to be efficient if it failS. to remove smoke generated at the point where such gases, YllPOurs; fumes or dusts originate. . 3. Prohibition and substitution. - (1) Use of ben­ zene and substances containing benzene is prohillited in the fOllowing processes- (a) . manufacture of vafriishes, paints and t!J.in- ners; and, - . '. (b). cleaning and degreasing operations.' . (2) Benzene or substances containing benzene shall not be used as a solvent or diluent unless the process in which it is used is carried on in an en­ closed system or: unless the process is carried on in a . manner which is considered equally safe as if it Wllre carried out in an enclosed system: (3) Where suitable substitutes are available, they shall be used instead of benzene or substances con­ taining benzene. This provision, however, shall not apply to the following processes:~.· (a) production of benzene; . (b). process where benzene is.used for chemical synthesis; and (c) motor spirits (used as fuel). . (4) The .Chief Inspector may, subject to cOnfir­ mation by the Government, permit exemptions from the percentage laid down in sub-paragraph 2 (a) and also from the provisions .of sub-paragraph (3) of this paragraph temporarily under conditions and within limits of time to be determined after consultation with the employers and workers concerned. 4. Protection against inhalation. -'-'- (1) The pro­ cess involving the use of benzene or substances con­ taini?-g benzene shall be as far as practi<Jablecarried out In an enclosed· system. .(2) Where, lt0wever, it is not practicable to carry out the procesS in an,enclosed'system, the workroom 3RD MAY, 1985 (VAISAKA13, 1907) in which benzene, or substances containing benzene are used shall be equipped ,with an efficient exhaust draught or other means for the removal of benzene vapours to prevent their escape into the air of the workroom so that the concentration of benzene in the air does not exceed 25 parts per million by volume or 80 milligra.tU.!J per cubic. metre. (3) , Air analysis for the measurement of concentra­ tion of benzene vapours in air shall be carried out every 8 hours or at such intervals, as may be directed by the Chief Inspector at places where process in­ volving use ofben:Zene is carried on 'and, the result of such analysis shall be recorded in aregis1:er spe­ cially maintained for this purpose. If the concentra­ tion of benzene vapoursin air as measured by air analysis, exceeds 25 parts per million by volume or 80 milligrams per cubic lUetre, theM;anager shall forthwith report the concentration 'to the Chief Ins­ pector stating the reasons for such increase., (4) Workers who for special reasons are likely to be exposed to concentration' of benzene in the air of the workroom exceeding the maximum referred to in suJrparagraph '(2) shall be provided with suitable respirators' or face masks. The duration of SUch exposure shall be limited as far as possible. 5. Measures against s/"'"in contact.- (1) Workers who are likely to come in contact with liquid benzene or liquid substances containing benz'me shall be pro­ vided with suitable gloves, aprons, boots and where necessary vapour tight chemical goggles, 'made of 1iJ.at~rial not affected by benzene or its vapours. (2) The protective we~r referred to .in "ub-para­ graph (1) shall ,be maintained in good condition and inspected regularly. 6. Prohibition relating to 'employment, of women and yaung persons. ~No,woman or person below 18 years shall be employed or permitted to work in any wQrkroom 'involving exposure to' benzene or subs-' tarices containing-benzene. 7~ Labelling. -' Every, container holding' benzene or substances containing benzene shall have the wOJ:!i "Benzene" and, approved danger symbols c!earlyvisibleon it and shall also display informa­ tion on benzene content,' warning about toxicity and warning about inflammability of the chemical. . 8. Improper use of benze'Poe. - (1) The use of ben­ zene or, substances contanining benzene by workers for cleaning their hands or their work clothing shall be prohibited. (2) Workers sl?-allbe instructed on the possible dangers arising from such misuse. 9.' ProMbition of consuming food, etc. in workroom. - No worker shall be allowed.to store or consume food or drink in the workroom in which benzene or substances containing benzene are manufactured, handled or used., Smoking ,and chewing tobacco or pan shall be prohibited in such workroom. 10. Instructions' ascregards riskS. ~ Every worker on his first employment shall ,be fully instructlld on the, properties of ,benzene or substances containing benzene which he ,has to handle !lit!i of the, dangers involvedthe:r:eunder. ,Workers shall also. be in$: 179 tructed on the measures to be taken to deal with in an emergency_ 11. Cautionary, notices.,- Cautionary notices in the form specified in appendix and printed in'the lan­ guage easily read and understood by tl?-e m!1jority of t~e workers shall be displayed' in prominent pla­ ces, m the workrooms. where benzene or substance containing benzene are manufactured, handled or used. ' ,12. Washing facilities; cloakroom and mes8Toom. - In factories in which benzene or substances con­ , taihlngb~nzene are manufactured handled or' used the occupier shall provide andm~intain in a clea'; state and in good repair- (a) washing, facilities under cover, of the, sta~dard of at least one tap for every 10 persons haVing constant. supply of water with soap, and a clean towel provided to eaCh individual worker if so ordered by the Inspector; b) a cloakroom with lockers for each wo;rker having two compartments - one for street-cloth: ing'and one for work-clothing; and' (c) "a messroom furnished with . tables. and ,benches with means for warming food, provided . that, where' a canteen or other' proper arrange­ ments exist for the workers to take their meals, the requirements of messroom shall be: dispensed with.. " , 13. Medical examination. - (1) Every worker who is to be employed in processes involving,use of benzene or substances containing benzene, shall undergo- (a) a thorough pre-employment medical exami­ nation including a blood"test for fitnesS for em­ ployment by a Certifying Surgeon; and, (b) periodical medical examination including blood test and other biological tests at intervals of eyery' 6 mQnths by the factory medical officer with the assistance of a labOratory. ' , (2) Certificates of pre-employment medical exami­ nation and' periodical medical' examination,' including tests, shall be entered ina health register' in Forpl 7 which shall be produced on demand by an Inspector. (3) (a) If the factory medical officer on"exami­ nation at any time is of the opinion that any worker has developed' signs' or, 'symptoms of benzene exposure, he shall make a record"'Ofhis findings, in the said .r~gister and inform the, manager in writing. " . , , ., " (b) On, receipt ' of thei.nformation from the fac­ tory medical officer, the manager Of the factory shall send the" worker so found' exposed, to the Certifying Surgeon who shall, ·after satisfying him­ sel,f with the findings of the factory medical officer and conducting necessary examinations, issue orders of temporary shifting- of the worker or suspension of the worker in the process. ' . (4) The medical examination shall be aqanged by the occupier or manager of the factory and the worker, so examined shall not bear any 'expenses' ror it. ~' .: 180 -----------------.-._. APPENDIX CAUTIONARY NOTIOE BeDUDe ~d subStances COD.tainiD~ beDzene :t HfJ1'Qrt4; (a) Benzene and,substances c~ntaining benzene are harmful. ' , , (b) Prolonged or repeated breathin15 of ?en~ene vapours may result in acute or chromc pOlsonmg. (c) 'Benzene can also be absorbed through skin whic,h may cause skin and other d,iseases. ' , 2. Preventive measures: , -, . . (a) Av~id breathing of benzene vapours. (b).Avoid prolonged ,or repeated contact of benzene with ,the skin. " (c) Remove benzene soaked, or wet clothing promptly, ' ' (d) If any time you are exposed to high con­ centration, of benzene vapours and exhibit signs' and symptoms such as dizziness, difficulty in breathiIig, excessive excitation and l~sing of cons- , , ciousness,' iinniediately inform your factory manager. (e) Keep all the containers of benzene closed. (f) Handle, use and process benzene and subs­ tances COIi~ining benzene carefully in ,order to prevent their spillage on floor. (g) Maintain good housekeeping. 3. Protective equipment: , (a) Use respiratory protective equipment in places where benzene vapours are present in high concentration. ' ' (b) IiJ. emergency, use self generating oxygen maSk or oxygen or air cylinder masks. (c) Wear hand gloves, aprons, g~gles and gum boots to avoid contact of benzene with your skin and otherbo<Jy parts. 4. First-aid measurl!8 in case of acute benzene poisoning. - (a) Remove the clothing immediately if it is wetted with benzene.' (b) If liquid benzene enters the eyes, flush them thoroughly for at l!il3St 15 minutes with clean ~ing' water and immediately secure medical attention. ' (c) IiJ. case of Unusual exposure to benzene vapour caIl 'a physician immediately. Until he arrives, do the fpllowing- (i) If the exposed person is conscious­ (aa) Move him to fresh air in open. (bb) Lay ,him down without a pillow and keep him quite and warm. iii) If the ~xpOsed person is unconscious':'" (aa) Lay him, dovyn preferably on the left side with the head low. ',SERIES INa./) '(bb) Remove any false teeth, chewing-gum, tobacco or otliei- foreign :objects which may be in his mouth. (ce) Provide him artificial respiration' in caSe difficulty is being experienced in breathe ing.' . ' , ' (dd) IiJ. mise of sliailow breathing orcya- , ,nosis ,(blu,~ness ,of *in, Jip$, ears, finger nail beds) heshouid 00, provided with me\lical oxygen or oxygE!n carbon dioXide IiJ,i:i<ture. If needed, ,heshouid be given !1rtificial'respira­ tioll~Oxygenshould, bell(jministeredby a trained person only. ' SCHEDULE XJfII ManufactUring P-S or operations- in , , carbon disulpbideplan1s 1. Application.':'" This Schedule shall apply to all electric furnaces in which carbon disulphideis gene­ rated aIidaIlotherplants where;carbon disulphide after generation, is condensed, refined and stored, This, Schedule is, in addition to and not in deroga­ tion of any of the provisiolls of the Act and Rules made thereunder. . 2. Oonstruction, insta7iatWn and (!peratiO\~. - (1) The buildings in' which electric furnaces are installed and carbon disulphide after generation is condensed and refined shall be segregated from other parts, of the factory and shall 00 of open type to ensure optimum ventilation and the plant layout shall be . such that ouly a minimum number of workers are exposed'tothe risk of any fire or explosion at any . onetime. . (2) Every electric furnace and every pl~t in which carbon disulphide is condensed, refined and stored with all their fittings and attachments shall be of good construction, sound material. and of adequate strength to sustain thein,temal pressure to which the furnace or the plant maY 00 subjected to and shall be so designed. that carbon disulphide ,liquid and gas are in closed system during, their normal working., '. (3) The electric furnace supports shall be firmly grouted about ~O centimetres in conCrete or by other effective means. . (4) Every electric furnace shaIlbe installed and operated according' to manufacturers' instructions and these. instructions' shaIl 00 clearly imparted to theperSollnel incharge of construction and operation. (5) The instructions regar\ling a bseJ,'Vance of cor­ rect furnace temperature, sulphurdi:lse, admissible current or powder consumption and periodical check­ ing of charcoal level shall 00 strictly complied with. 3,. Electrode8. ,- (1) Whe.re upper ring electrodes made of steel are. used in the electric furnace, they shall be. of seamless tube construction and shall have ' an'3.ngement .for being connected to c'ooling'water system through a siphon built in the electrodes or through, a poSitive pressure waterp~p. ' (2) The ~gements for cooling water referred to in sub-paragraph (1) shall 00 connected with automatic .alarm, system which will a(lttiate in the event of interruption of cooling wateT in the elec- , I 3RDMAY,1985 (VA/SMA 13, 1907) trodes and give visible and a.udible. alarm signals in the control room and simultaneously stop power supply for the furnace .operation and' to stop the further supply of water. The alarm system and the actuating device shall be checked every day. 4. Maintenance of charcoal level. ~ When any electric furnace is in operation, it shall be ensured that the electrodes are kept covered with charcoal bed. 5. Charcoal separator. ~ A cyclone type of char­ coal separator or any other effective arrangement.to the satisfaction of the Chief Inspector shall be fitted on the offtake pipe between the. electric furnace and sulphur separator' to prevent entry of pieces of char­ coal into the condensers and piping. 6. Ruptt!re discs' and safety seal. - (1) At least two rupture discs of adequate size which shall blow off 'at a pressure twice the 1l!aximum operating pressure shall be provided' on each furnace and shan. either be mounted directly on the ,top of the fiIrnace or each through an independent pipe as close as possible to the furnace. . (2) A safety water seal shall 'be provided and tapped from a point. between the charcoal separator, and the sulphur separator. i. Pyrometer and manometers. - (1) Each elec­ tric furnace shall be fitted with adequate llUlUber of pYrometers to give an indication of the temperature as correctly as reasonably practicable at various points in the furnace. The dials for reading the tern- . perature shall be located in the control room. . (2) Manometers or' any other suitable devices shall be provided for indicating pressure- (a) iIi the, offtake pipe before and after the sulphur separator; and (b) in primary and secondary condensers. ' 8. Check valves, ek - All piping carrying carbon disulphide shall be fitted' with check' valves, water seals or some other effective devices at 'suitable posi­ tions so as to prevent gas from flowing back into any electric furnace in the event of its shut down. . Overhead, storage tank or tanks of adequate capa­ city shall be provided to ensure supply of cooling water by direct' gravity feed to thecondensors in ~ of emergency such as power shut down, etc. at least for the duration during which it ,would be possible to initiate and complete the procedures for the shut-down of the furnace., , 9. Inspection and maintenance of electric furnace's. ~ (1). Every electric furnace shall be inspected inter­ nally by a competent person- . (a) before being placed in service afterinstalla-' .tion; (b) before being placed in service after recons­ truction orrerrairs; and .,' . (c) periodically every' time the furnace is opened for cleaning or decashing or for replacing electrodes. . . " . (2) When ,an. electric furnace is shut down for cleaning or de-ashing...,.. 181 (a) the brick lining shall be checked for conti­ nuity and any part. found defective removed; (d), 'after removal ()f any part oithe lining re­ .ferred to in (a) the cOIldition of the shell shall be closely inspected; and (c) any plates forming shell found corroded to the extent that safety of the furnace isendan­ gered shall be replaced. 10 .. Maintenance of records.-Thefollowing hourly records shall be mamtained in a log book: - (a) manometer readings at the points specified in sub-paragraph 7 (2) ; . (b) g~ tempe~tureindicated .by pyrometers and, all other vital points, near the sulphur sepa­ rator, and primary and, secondarycondeuSers; .. (c) water tem:peratu~e>andflow oL water through the siphon in the electrodes; and . , • c- ,,' ',' .' (d) primary and secondary voltages and cur­ rent and energy consumed. ," ,'. . ' . n. Electr".ical appar"atus, Wlnng and fittings.­ All buildings in which carbon. diSulphide is' refined or stored shall be provided with ele~trical appara­ tus, wiring and fittings which 'Shllli aford adequate protecti?n from fire and explosiOli. .' , ' 12 .. Prohibition relating to smoking; -No person shall. snl0ke 'or carry', matches,fire, or naked 'light ?r other: means, of producing a '~:\kedlight or spark m buildmgs in which carbon disillphide ,is refined' or store~, 8;nd a notice in the langnageunderstood by a lUaJor~ty of the workers shaUbeposted in the p.lant prohibiting· smoking and carrying of matches, fIre or naked, light or other means of producing naked light or spark into such rooms. . .13. Mea.nsO{,68cape. :""Adequatemeans of escape shall be provided and· maintained, to ,enable, persons to moye .to a' safe place as quickly as "possible in ,case of' an· emergency. At least:two independent staircases of ,adequate width shall be provided in every building . housing the furnaces at. reasonable .intervals at opposite ends. TheSEl shall ,always be kept clear of all obstructions and so designed as to afford easy passage. " . ' 14. Warnirtg in case of fire. - There shall beadEi" quate arrangements for giving warnings in case 6f fire or explosion which shall operate on electricity and in case of failure of electricity,by some mecha~ nical means. . ' 15. Fire fighting 'eqliipment :.... ... (1) Adequate number of suitable fire extinguisherS or other fire fighting equipment shaH be kept in constant readiness for dealing. with .. r-isks involved and de­ pending on the amount and nat1il:e of materials stored. . ,(2) Clear. instructions as to. ,how the extin­ guishers or other equipment shoUld be used ,and printed in the language which the. majority of the workers employed understand, shall be affixed to , each extingnisher or other equipment an!i the per­ sonnel shall be trained in their use. 182 '16. Bulk. sulphur. ~(1) ,Open .or semi-encl~ spacesdor.morage of· b.ulk sulphur .shall be sl~ed with due regard to .the dangers which ll!ay arIse from sparks given off by nearb.y locomotives, etc. and'precautions shall be taken to see that .f1~es, smoking and matches and other sources of Ignition do not come. in contact with the clouds of dust arising duringhandling of bulk sulphur. (2) All enclosures for bulk sulphur shaJl~e' of non-combustible constru!)tion, adequately ventilated and So designed as to :provide a minimum of ledges on which dust may lodge. . (3) 'rhe bulk sulphur in, the enclosures shall be handled in such a manner as to minhriise the forma­ tion. of dust clouds and no flame, smoking and matches. or other sources of ignition shall be em­ ployed during handling and non-sparking tools shall be used whenever sulphur is shovelled or otherwise removed by hand. (4) No repairs involving flame~, heat or use of hand or power tools shall be made in the enclosure where bulk sulphur is stored. 17. Liquid8Ulphur. ~ Open flames, electric sparks . and , other sources of ignition, including smoking and matches, shall be excluded from the vicinity of molten sulphur. 18. Training and 8UpervisWn. ~ (1) All electric furnaces and all plants . in which carbon disul phide is condensed, refined or stored shall be under ade­ quate supervision at all times while the furnaces and plant are in operation. (2) Workers in charge of operation and mainte­ nance of electric furnaces and of the plants shall be properly qualified and adequately trained. 19. Washing facilities. - (1) The occupier shall provide and maintain in a clean state and in good repair, for the use of all persons employed wash place under cover with at least one tap or stand­ -pipe, having a constant supply of clean water for ?very five such persons, the taps or stand-pipes be­ mg spaced not less than 120 centimetres, apart with a sufficient supply of soap and clean towels, pro­ viged thattowels shall be supplied to each individual worker if so ordered by the Inspector. (2) All the workers employed in the sulphur sto­ rage, handling and melting operations shall be pro- vided with a nail brush. . 20. Per8onal. protective equipment. - (1) Suitable goggles and protective clothing consisting of ove­ ralls without pockets, gloves and foot-wear shall be provided for the use of operators -, , (a) when operating valves or cocks controlling fluids, etc.; . (b) drawing off of molten sulphur from sulphur pots; and . (c) handling charcoal or sulphur. (2) Suitable respiratory protective equipment shall be provided and stored in the appropriate place for use during abnormal conditions or in an emergency. (3) Arrangements shall be made for proper and efficient cleaning of all such protective equipment. SERIES INo.S ~1. CloakrQoms. -,. There shall be provided and maintained for the use of all persons employed in the processes a suitable cloakroom for clothing put off during work hours and a sultable place separate from the cloakroom for the 'storage of overalls or working clothes. The accomhIodation so provided shall be placed in the charge of a. responsible person and shall be kept .clean. 22. Unauthorised persons. - Only maintenance and repair personnel, persons· directly connected with the plant operation and those accompanied by authorised persons shall be adniitted into the plant. SCHEDULE XXIII Manufacture or manipulation of mr¢nogeJnc dye intermediates 1. Application. - '1'his Schedule shall apply in respect of all factories or any part thereof where processes in which the substances mentioned in paragraph 3 and' { are formed, manufactured, handled, or used and the processes incidental thereto in the course of which these substances are formed, are carried on. The processes indicated in this para­ graph shall be referred to hereinafter as "the said processes", and such a reference shall mean any or all the processes described in this paragraph. ' 2. DefinitiOn. ~ For the purpose of this Schedule the following definitions shall apply, unless the con- text otherwise requires - . (a) "controlled substances" means chemical sub­ tancell mentioned in paragraph 4 of this Schedule; (b) "first,employment" means first employment in the said processes and also re-employment in such processes following any cessation of employ­ ment for a continuous period exceeding three calendar months; (c) "efficient exhaust draught" means localised ventilation effected by mechanical means for the . removl!l of gas, vapour, dust or fume so as to prevent them from escaping into. the air of any place· in which work is carried on. No draught, Shall be deemed to be efficient which fails to remove smoke generated at the point where such gas, vapour, fume or dust originates; and (d) "prohibited sqbstances" means chemical substances mentioned in paragraph 3' of this Schedule. 3. Prohibited 8Ubstances. - For the purpose of this Schedule, the following chemical substances shall be classified as "prohibited substances" except when these SUbstances are present or are formed as a by-product of a chemical reaction ina total concen­ tration not exceeding !llle per cent - . (a) beta-naphthylamine and its salts; (b) benzidine and its salts; '(c) 4-amino diphenyl and its salts; (d) 4-nitro diphenyl and its salts; and (e) any substance containing any of. these. compounds. , 8RD,MAY;1985 (VAISAKA 13, 19lJ,,{) , 4., Controlled substances.~' For the purpose of this Schedule,' the following ,chemical substances shall be cIasslfiEid as ~'controlled substances" - '(a) alpha-napthylamine or alpha-~aphthylamine 'containing not more thanon~ per cent of ~ta­ -naphthylamine either as a by-product of chemlcal reaction or otherwise, and its 's!,-lts; ,,(b) ortho-tolidine and its salts; , (c) dianisidine and its salts ; (d) dichlorobenzidine and its, salts; , (e) auramine; and "(f) magneta. 5. Prohibition of employment. -No person shall be employed in the said processes in any factory in which any prohibited substance is formed, manufac­ tured, processed, handied'or used except as e~empted by the Chief Inspector as stipulated in paragraph 23. 6. Requirements for processing or handling con­ trolled substances. - (1) Wherever any of the con­ trolled substances referred to in paragraph 4 are formed, manufactUl:ed, processed, handled or used, allpractical steps shall be taken .to prevent inhala­ tion, ingestion of absorption of the said controlled substance by the workers while engaged in processing that substance, and its storage or transport within the ,plant, or in cleaning or maintenance of the con~ cerned equipment, plant, machinery and storage' areas. ' ,,(2) As far as possible all operation shall be carried out in a totally enclosed system. Wherever sueh enclosure, is not possible, efficient exhaust draught shall be applied at the point where the controlled substances are likely to escape into the atmosphere during the process. (3) ,The controlled subst~ces shall be received in the factory in tightly closed containers and shall be kept so except when these substances are in pro­ cess or in use. The controlled subs~ces shall leave the factory only in tightly closed cOntainers of appro­ priate type. All the containers shall be plainly labelled to indicate the contents. ' , ' , 7. Persimal protective equipment. ~ (1) fuefol­ lowing items of personal protective equipment shall be provided and issued to every worker employed hi the said processes - ' " ' "', , ' (a) long trousers and shirts or ov~ralls wifu full sleeves, and head coverings. The shirt or overall shall cover fue neck completely; and (b) rubber gum-boots. (2) The following items of personal protective equipment shall be provided' in sufficient numbets for use by workers' employed in fue said processes V(hen there is danger of injury' during the perfor-, mance of normal duties or in fua event of emer­ gency- (a) rubber hand~gloves; (b) ,rubber aprons; and , (c) airline rllspirators or ofuer'suitable respira- tory' protective equipment. ' :1.83 " (3), It shall be the responsibility of .t~e man~ger to maintain all items of personal protective eqUIpment in.a ,clean and hygienic condition and in good repair. S. Prohibition relating, to emplOyment of women and young persons - No woman or person below 18 years shall be eri1ployedor permitted to work in any rOOm 'in' wliich the said processes are carried on. .9. ,Floors of ,tporkroom. - The ,floor of every \vorJ<room in which the said p~esS\lS are carried on shall be- ' ,,' (a)smootb, and impervious to water provided ,tliat asphalt or tar shall not be used in the com­ 'position of the floor, (b) maintained in astate of ,good repair, (c) with a suitable slope for easy draining and provided With gntters II.tld ' , (d) thoroughly Washed dhlly ,wifu fue drain . water being led into a sewer furough a, closed 'channel., ' . , 10. Disposal of empty' containers. - Empty con­ tainers used for holding controlled substances shall befuoronghly cleaned of fueircontents and treated with a deactivating agent before being discarded .. " 11. Manual handling. -Controlled, substances shall not be allowed to be'mixed, filled, emptied or handled except by means Of a scoop with a handle. Such scoop shall be thoroughly Cleaned daily. 12. Instructions regarding mk.- Every worker on his first employment in the, said processes shall be fully instructed about the properties of the toxic chemicals to whiCh he js likely to bE! exposed to" of the dangers involved and fue preCautions to betaken. Workers shall also be instructed on the measures to be taken to deal with an emergency. 13.' Cautionary placards. "'- Cautionary placards in fue fOrm specified in appendix attached to this Schedule and.printed in thelanguage of the majority of the workers employed in fue said processes shall be affixed in prominent places frequented by , them in thefa!)tory, where the placards can be easily lind conveniently read, Arrangements shall 'be made by fue, manager to instruct periodically' all such workers regarding, the precautions contained in·fue C(1utionary placards. ' 14. Obligations of the worke1;s; - It shall pe fue d,uty of the persons employed infuesaid processes to submit' fuemselves .for the medical examination including exfoliative cytology of uririary system by theCertifyingSurge6n orfue qualified medical prac" titioner as provided for Under these rules. 15; Washing and bathing facilities.:"-' (1) The fol-' lowing washing and bathing facilities shall be pro­ vided and'inaintained in Ii, clean state and in good repair f6r the use of all workers employed in the said processes:"-' , . (a)'a wash place under cover having constant supply of water and prOVided with, clean towels, 'soap,and,nailbrushes and with atileastone stand pipe for every five such workers; , 184 (b) 50 per cent of the stand pipes provided under clause (a) shall be located in bathrooms where both hot and cold water shall be made available during the working hours of the factory and for one hour thereafter; , (c) the washing and bathing, facilities shall be in close ,proximity of the area housing the said processes; (d) clean towels shall be provided individually to each worker; ,and (e) in addition to the taps mentioned under clause (a) .. one stand 'pipe, in which warm water is made available, shall be provided on each floor. (2) Arrangement shall be made to wllsh factory uniforms arid other work clothes everyday. 16. Food, drink, etc. prohibited in workroom.-No 'worker shall consume food, drink, pan, supari or to­ bacco or shall smoke in ariy workroom in which the said processes are carried on and rio, worker shall remain in any such room during intervals for meals or rest. 17. Cloakroom. - There shall be provided and maintained in a clean state and in good repair for the use of the workers employed in the said pro­ cesses. (a) a cloakroom with lockers having two com­ partments - one for street clothes and the other for work clothes; and ' , (b) a place separate from the locker' room and themessroom, for the storage of protective equip­ ment provided under paragraph 7. The accommodation' so provided shall be under the care of a responsible person and shall be kept clean. " ' 18. M essroom. - There shall be provided and main­ tained for the use of workers employed in the said processes who remain on the premises during the meal intervals, a messroom which shall be furnished with tables and benches and provided with suitable means for warming food. ' 19. Time allowed for' washing. - Before the end of each shift 30 minutes shall be allowed for bathing for, each worker who is employed iti the said pro­ cesses. Further, at least 10 minutes shall be allowed for washing before each meal in addition to'the re­ gular time allowed for meals. , 20. ,Restriction on age of persons employed. _ No worker under'the age of 40 years shall be engaged in the factory in the, said processes for the first time after thE) date on: which this Schedule comes into force. ' 21. Medical exa'ln~nation. - (1) Every worker em­ ployed in' the said processes shall be examined by a Certifying Surgeon ,within 14 days of his first em­ ployment. Such examination shall include tests which the Certifying Surgeon may consider appropriate and shall include exfoliative cytology of the urinary system. No worker shall be allowed to work after 14 days of his first employment in the factory un­ less certified fit for such employment by the Certi- fying Surgeon. ' ' SERIES I No. 5 (2) Every worker employed in the said processes shall be re-examined by a Certifying Surgeon, at least once in every six calendar months. Such exa­ mination shall include tests which the Certifying , Surgeon may consider appropriate but shall include exfoliative cytology of the urinary system. (3) A person medic3.Ily examined under sub-para­ graph (1) shall be granted by the Certifying Sur­ geon a certificate of fitness in Form 30. Record of each re-examination carried out under sub-paragraph (2) shall be entered in the certificate. The certificate shall be kept in the custody of the manager of the factory. • (4) The record of each examinlltion carried out as refelTed to in sub-paragraph (1) and (2)' including the nature and the results of the tests shall be entered by the Certifying Surgeon in a health register in Form 31- (5) The certificate of fitness and the health regis­ ter shall be kept readily available for inspection by any Inspector. (6) If at any time the Certifying Surgeon is of the opinion that a person is no longer fit for employment in the said processes or in any other work on the ground that continuance therein would involve da­ mage to his health he shall make a record of his findings in the said certificate and also in the health register. The entry of his findings in those docu­ ments should also include the period for which he considers that the said person is unfit for work in the said processes or in any work as the case maybe., (7) No person who has been found unfit to work as said ill sub-paragraph (6), shall be re-employed or permitted to work unless the Certifying Surgeon, after further examination, again certifi,es him to be fit for employment. ' 22. Medical facilities. - (1) The occupier of every factory in which the said processes, are carried on shall engage a qualified medical' practitioner for medical surveillance of the workers employed in such processes. His appointment shall, be subject to ap­ proval of the Chief Inspector. (2) The occupier shall provide to him all the necessary facilities for the' purpose 'referred to in: sub-paragraph (1). ' (3) A record of medical examinations a.nd appro­ priate ,tests carried out by the qU!l-lified medical practitioner shall be maintained ina form approved by the Chief Inspector. , 23: Exe~ptions-prohibited' substances. - (1) The Chief Inspector· may by a certificate in writing (which he may at b,is discretion revoke at any time), subject to such conditions, if any, as may be specified the,ein, exempt ~ny process:in the course .of which any of the prohibited substances is fo~ed, proces­ sed, manufactured, handled .or used, from the proc visions, of ,paragraph 5, if he is satisfied that the process is, carried out in a totally enclosed and harmeticilJly sealed system in such a manner that the prohibited substance is not removed' from the system except in quantities no greater than that re­ quired for the purpose of control of the process, or such purposes !is is necessary to ensure that the product is free 'from any of the prohibited substan­ ces. ~F v 3RD MAY, 1985 (V AlSAKA 13, 1907) (2) The Chief Inspector may allow the manufac­ ture, handling or use of benzidinehydroCbloride pro­ vided that all the processes in connection with it are carried out in a totally enclosed system in such a manner that no prohibited' substance other than benzidine hydrochloride is removed therefrom ex­ cept in quantities no greater than that required for the purpose of control of the processes of for such purposes as is necessary to ensure that the product is free from prohibited substances and that adequate steps are taken to ensure that benzidine hydrochlo­ ride except when not in a totally enclosed system, is kept wet with not lessJhan one,part of water to two parts of benzidine hydrochIo:ride at all . times. 24. Exemptions-general. - If, in . respect. of any fa!3tory, the Chief Inspector is satisfied that owirig to the exceptional circumstances· or iufrequency of the processes or for any .other reason, all or any of the provisions of this Schedule is not necessary for the protection of the workers in the factory, the Chief Inspector may by a certificate. ,in writing (which he may in his discretion revoke at any tinIe) , exempt such factory from all or any of such pro- . visions subject to such conditions, if any, as he.may specify therein. 1. 2. 3. APPENDIX OAUTIONARY PLAOAlID/NOTIOE Oarclnogenic dye In_tea Dye intermediates which are nitro-aminod~:i-iva­ tivea or aromatic hydrocarbons .are toxic:, You · may be required to. handle' these chemicals fre- quently in this factory. ., , Use the v~rious items of protective wear. to safe- · guard your own health. . , Maintain scrupulous cleanliness at all times. Tho­ roughly wash your hands and feet before taking · meals. It is essential to take a bath berore leaving the factory. . 4. Wash off any chemical faIling ~n your body with soap and water. If splashed with a solution of the chemical, remove the contaminated clothing 185 2. Definitions. _ For the purpose of this Sche­ dule- .. _. _. - - <.. "., .. ~. (a) "noise" .means any unwanted sound; (b) "high .noise level" means any noise level which, measured on the A-weighted scale, is 9Q dB or above .. (c) "deCIbel" means one-tenth o~ "Bel" which is the fundamental division of a logarithmic scale used to express the ratio of two speclIied or im­ plied quantities, the number of "Bels" denoting such a ratio being the logarithm to the base of 10 of this ratio. The noise l~vel (or the soUnd pressure leve!) corresponds to'a reference pressure .of20><10-6 newtollsper square metre or 0.0002 dynes per square centimetre which is .the thre,sold of hearing" that . .is, the lowest sound pressure level necessary to produce the "sensation of hear- . ing in average healthy listeners. The decibel in abbrevi~tioll form is dB. '(d) "frequency" is the rate of pressure va:ria­ tions'expressedincycles per' second or herts. (e) "dB~'refe~s tosouri'd level in decibels as meaSured ona sound . level meter operating on the A,weighting net work with slow meter res­ ponse. (f) "A"weighting" means making graded adjust- . ments, in the:intensities of stmnd of various fre- .quencies for the purpose of 'noise 'measurement, so that the ,sound pressure level, measures ,by an instrument . reflects the actrlalresponse of the· human ear to the sound measured .. 3. Protection against noise. - (1) In every fac- . tory, suitable enginee:riug con~l or administrative measures shall 'be taken'to ensUre, ,:so far as is rea­ sonably practicable that no worker is exposed to sound levels: exceeding the maximuni pennissible noise" expoSUre levels sp,ecified in Tables land 2. TABLE 1. Permissib~~,:e~poslire in, ca$eS of:oontlnitous noise immediately. These chemicals...are known to pro- Total time of exposure (contic ducecynosis .. Contact the :medical· officer or _nuous.or a ·number.ofshort . d-' - - . . term ,expos~r?s) _per Sound :. preSS~!i'e level in dBA . appomte .' doctor immedIately .andget his advice. '. day, III hours. 5. Handle the dye intermediates . only" with long handled scoops, and never with bare hands; . 6 .. Alcoholic drinks should be avoided' as they eulIance the :risk of poisoning by the c!J.emicals. 7. Keep your food and 'drinks away fro~ work plac~. Consuming food, drinks or tobacco in any 'form at the place of work is prohibited. 8. Se:rious effects of the coritact with toxic che~­ cals may ;result after many years. Great care must be taken to maintain absolute cleanliness ,of body, clothes, machinery <tnd, equipIpent. L, SCHEDULE XXIV ,OperatiOJIS involving, high noise levels 1. Application. - This Schedule shall apply to all operations in any manufactu:ring proces,s having high noise level, .' 8 6. ,4 3i 2 11;2 1, . % liz '% 90 92 95 :, 97 '100 102 105 107 '110 115. NOi'EB: i . . No' 'exposure in excess Of; 115 dBA-, is to be .. permitted. ' "" . 2 .. For ir,ty period of exposure ,falling, :in' between . any figure and the:11ext hlghru;, or, l!)\oV~r figure. as indicated" iii " column 1~ -'the -;pennissible sound .·pressure level is' 'to be d~tennined by extrapo.~ lati~ri. o!;l;3. :proportionate basis. 186 TABLE 2 Pernn.sible exposure levels of impulJive or impact noise Peak sound pressure level in dl3 140 135 130 125 120 Permitted 'numb~r- of impulses or impacts - per day 100 315 1,000 3,160 10,000 NOTES: 1. No exposure in excess 'of 140. dB peak sound pressure level is permitted. .' < 2. For any peak _soun~ pr.ess~re: level -f<;uling 'in between any figure and th~_< Ilext h,igher or lower figure as indiea.te~ in -~olumn 1, _ the per­ mitted number of impulse's .or. impacts per- day is to be determined by extrapolation on a propor­ tionate basis. SERIES I No.5 the. permissible levels,.andrehabilitation of sll.ch workers either by reducmg the exposure to the no~se levels or by transferrinl5 them to places where .nOlse levels are relatively less or by any other SUItable means. (b) Every worker employed in areas where the noise exceeds, the maximum permissible. exposure levels specified in sub-paragraph (1) shall be sub­ jected to an auditory examination by a Certifying Surgeon within 14 days of his f.irstemployment~d thereafter, he shall be re~examIDed Itt least once m every 12 months. Such initial and' periodicalexami­ nations shaII inclUde tests which' the Certifying Surgeon may consider appropriate, and shall include determination of auditory thresholds for pure tones of 125, 250,500, "1000,2000, .4000 and 800(} cycles per.secondc . . , RulePrescrib.d under Sections SS and SS-A: l32. Notificatio~of accidents and dangeroUil occurrences. - (1) When any accident which results in the dea:th of any person or which results in such bodily injury to any person as is likely toca)1se his (2) For the purposes of th~sSchedule,. if the variations in the noise level, mvolve maXlDla at intervals of onellecond or less, the noise is !o ~e considered as a continuous one and the crltena civen in Table 1 would apply. In. other .cases, the ~oise is to be considered as· impulsive or impact noise and the criteria given in Table 2 would apply. (3) When the· daily noise exposure is comp?sed of two or more periods of noise exposure at dlff~­ rent levels their combined effect should beconsl­ dered, rather than the individual effect of each. The mixed exposure should be considered to ex~eed the limit value if the sum of thefractlOns C1 C2 ... Cn exceeds unity- . 'death, or any dangerous occurrence specified in the Schedule annexed hereto takes place in a factory, the manager of the factory shall, within four hours of the happening of such accident or occurrence, send a notice thereof by telephone, speCial messenger or telegram to the Inspector and the Chief Inllpector and' also' to the Administrative Medical Officer, Employees' State Insurance Scheme, Panaji. -+-+ T1 T2 Tn. Where the ci, C2, etc. indicate the total time ;of actual exposure at a specified noise level·and T1, T2, etc. denote the time of exposure permissible at that level. Noise exposure of less than 90 dBA may be ignored in the above calculation. (4) Where it is not .possible to reduce the noise exposure to the 1evels specified in sub-rule (1) by reasonably practicable engineering control or admi­ nistrative measures, the noise exposure shall bere­ duced to the greatest extent ·feasibleby such control measures, and each worker so exposed shall be pro­ vided with suitable ear protectors so as to reduce the exposure to noise to the levels specified in sub­ -paragTaph (1). (2) When any accident or any dangerous occurr­ ence specified in the Schedule anriexed hereto, which results in the death of any person or which results iiI. such bodily injury to any perSon as is likely to cause his death, takes place in the factory, notice as mentioned in sub-rule -(1) shall be sent also to: (a) the District Magistrate or Sub-divisional Magistrate; . (b) the officer-in-charge of the nearest Police Station; and (c) the relatives of the injured or deceased person. (5) Where the ear protectors provided in accor­ dance with sub-paragraph (2) and, worn by a worker cannot still attenuate the noise reaching near his ear, as determined by substracting the attenuation value in dBA of the ear protectors con­ cerned from the measured sound pressure level, to a level permissible under Table 1 or Table 2 as the case may be, the noise exposure period shall· be suitably reduced to correspond to the permissible noise exposures specified in sub-paragraph (1). (3) Any notice given as reqUired under sub-rule (1) and (2) shall be confirmed by the ffian;tger of the factory to the authorities mentioned in those sub-rules within 12 hours of the accident or the dangerous occurrence by sending them a written report in Form 32 in the case of im accident or dangerous occurrence causing death or bodily injury to any person and in Form 33. in the case of a dan­ gerous occurrence which has not resulted in any bodily injury to any person. . (4) When any. accident or dangerous occurrence specified in the Schedule takes place in a factory and it causes such bodily injury to any person as prevents the person injured from working for a period of 48 hours or more .immediately following the accident or the dangerous occurrence, as the case may be, the manager of the factory shall send a report thereof to the Inspector in Form 33 within 24 hours after the expiry of 48 hours from the time of the accident or the dangerous occurrence; (6) (a) In all ca.ses where the prevailing sound levels exceed the pennissible levels specified in sub­ -paragraph (1) there shall be administered an effec­ tive hearing conservation programme which shall include among other heltring conservation measures, pre-employment . and periodical auditory surveys conducted on workers exposed to noise exceeding Provided that if in the case 'of an accident or dangerous occurrence, death occurs of any person injured by such accident or dangerous occurrence ~.- SRD'MAY, 1985 (VAISAKA 13, 1907) _____ , __ , ________ ~ _______ _ 187 after the notices and reports referred to in the fore­ going subcrules have, been sent, the ,manager of the factory shall forthwith send a notice thereof by telephone, special messenger or telegram and also have ,this iIiformation confirmed in writing within 12 hours of the'death to the authorities and persons mentioned in sub-rules (1) and (2): Provided further that, if the period of disability from working for 48 hours or more referred to in subcrule (4) does not occur immediately following the' accident, or the dangerous occurrence, but later, or Occurs iIi more than one'spell, the report referred to in the foregoing sub-rule shall be sent to the Inspector in the prescribed Form 32 within 24 hours immediately following the hour when the actual total period of disability from working and resulting from the accident or the dangerous occurrence becomes 48 hours. SCHEDULE Dangerous occurrences, whether or not they are attended by personal injury or disablement ,shall include the following:- 1. Bursting of a plant used for containing or supply­ ing steam under pressure greater then atmos­ pheric pressure. 2. Collapse or failure of a crane, derrick, winch, hoist or other appliances used in raising or lowering persons or goods, or, any part thereof, or the overturning of a crane. 3. Explosion, fire bursting, out, leakage or escape of any molten metal, or hot-liquor or gas causing bodily injury to any person or damage to any room 'or place in which persons are employed, or fire in rooms of cotton pressing factories when a cotton opener is in use. 4. Explosion of a receiver or container used for the storage at a ,pressure greater than atmospheric pressure of any gas or gases (including air) or any liquid or solid resulting from the ,compres­ sion of gas. 5. Collapse or subsidence of any floor, galleI"Y., -roof, bridge, tunnel, chimney, wall, .'building or any other, structure. Rule prescribed uhder sub-section (I) of Section 89: 133. Notice of poisoning or disease. -.A notice in Form 34 shall be sent forthwith but not later than four hours to the Chief Inspector, the. Certifying Surgeon and the Administrative Medical Officer, Employees' State :Insurance Scheme, Panaji, Goa by the manager of a factory in which there occurs a case of lead, phosphol'Qus, mercury, manganese, arsenic, carbon bisulphide or benzene poisoning; or of poisoning by nitrous fumes or by helogens or halogen derivatives of the hydrocarbons of the aliphatic series; or of chrome ulceration, ,anthrax; silicosis, toxic anaemia, toxic jaundice, primary epi­ theliomatous cancer of the skin, or of pathological manifestations due to radium or other radio-active substances or X-rays. CHAPTER X SUPPLEMENTAL Rule prescribed under sub-seelion (I) of Section 107:, 134. Procedure in appeaIs.- (1) An appeal pre­ sented under Section 107 shall lie with the Chief Inspector, or in cases where the o~er a~pealed against is an order passed by that officer, wlth,the Government or with such authority as the Govern­ ment may appoint in this behalf and shall be in the form of a memorandum setting' forth concisely the grounds of objection to the order, and bearing court­ fees stamp in accordance with Article 11 ofSche­ dule II to the Court-fees Act, 1870, and shall, be accomp~ied by a copy of the order appealed against. (2)OiJ. receipt of the memorahd)lffi of appeal, the appellate authority shall, if it thinks fit or if the appellant haS requested that the. appeal should be, heard with the aid of assessors; call upon the body declared under sub-rule (3) to Pc. repreSentative of the indUstry concerned,to appoint an assessor,within a period of 14 days. If, an assessor is nominated by such body, the appellate authority ,shall appoint a second a.ssessor itself. It shall then fix a date for the hearing of the appeal and shall give due notice of 'such date to the appellant and to the Inspector whose order is appealed against, and shall call upon such date to assist in the ,hearing of the appeal. (3) The appellant shall state in the memorandUm presented under. sub-rule (1) whether be is a member of one or more of the following bodies. The body empowered to appoint the assessor shall~ (a) if the appellant is a memhE!r 'of o!le of such bodies, be that body; (b) if he is a member of two such bOdies, be the body, which ,the appellant desires' should . appOint such assessor; and (c) if the appellant is not ,a n,tember of any of the aforesaid bodies or if, he dOes not state in the memorandum as to which of'such bodies shomd appoint the assessor, be one' 6f the following bodies which the appellant authority considers as the best fitted to represent the industry conc,erned, 'namely: . 1. Goa, Chamber of Commerce &. Industry, Panaji. 2. Goa Small Industries Association, Margao. 3. Other associations of employers in the industry concerned. (d) AI). assessor appointed in, accordance with the prOVIsions of sub-rules (2}.' and (3)shal!' receive, for the hearing of the appeal, a fee to be fi,."<:ed by the appellate authority, subject to a , maximum of rupees seventy five per diem. He shall also receive the actual, travelling ,expenses. The fees and travelling expenses shall be paid to the assessors by the Government, but where assessors have been appointed at the request of the appell­ ant and the appeal has been decided wholly or partly against him the ,appellate authority may direct that the fees and travelling expenses of the assessors shall be paid in whole or in part by the appellant. , Rule prescribed under sub-section (I) of Section '108: " 135. Display of noticeS. - The abstract of the Act and of the rules required to be displayed in every factory shall be in Form 35. 188 Rule prescribed' under Section 110: 136. Returns. - The manager of every factory shall furnish to' the' Inspector or other officer appointed by the Government in this behalf, the following returns in the form and within the due datesspeeified below ~ (a) ,annual return in Form 36, in duplicate, on or before 31st January of each year; (b) ,half-yearly return in Form ;37,in duplicate, on or before the 15th July of each year. . (c) before the end of each year,' a return giving notice of all the days on which it is intend~d to close. the factory during the next· ensuing year: If in any year, a factory is newly started or re-started after its closure during the previous year, such return s~all1Je submitt~before the date . of such' startmg or re-startmg for the remruning period of the year: " Pr()vided. that the Government may dispense with this return in the case of any specified factory or of any class of factories or of the factories in any particular area: . '.' Provided further that the annual return of holi­ days shall be dispensed with in ,case of all factories,-:- (a) which regularly observe Sundays as holi­ day:;; or (b) which regularly observe a fixed day in the week as a holiday; or .' (c) which observe holidays according to a list approved by the Chief Inspector; , Where. the manager of allY, factory makes any departure from such a holiday or . list of holidays as aforesaid, prior intimation' shall be given. to the Chief Inspector. (d) Annual return of accidents 'in Form 39 on or before the 31st January of the succeeding year. Rule prescribed under Section 109: 137. Service of notices. ~ The despatch by post under registered cover of any notice or order shall be deemed sufficient service on the occupier, owner or manager of a factory of .such notice or order. Rules prescribed under Section 112: . 138. PermisSible levels of certain chemical subs­ tances in work environment. - Without prejudice to the requirements in any other pNvisionsin the Act or the 'Rules, the requirements specified in thi.s Schedule shall apply to all factories. . SCHEDULE' 1. Definitions. -...: For the purpose 'of this Sche­ dule- . ,(a) "mg/m'" means milligrams of a substance per cubic metre of air; . (b) "mppcm" means million particles of a subs­ tance per cubic metre of air; Y!) "ppm"means parts of vapour or gas per millIon parts of air by volume at 25'C and 760 m of mercury pr~ure; SERIES I No.5 (d) "time weighted average concentration" means the average concentraton of a substanc,", in the air at any work location in a factory computed from evaluation of adequate number of air samples taken at that location, spread over the entire shift on any day, after giving weightage to the duration for which each such sample is collected and the concentration prevailing at the time of taking the sample. " Time' weighted average. ___ C,T, + C2T, + .,. ( n Tn concentration, .- T, + T~ + ... n Where .C, represents the concentration of substance for duration T, (in . hours); . . C, represents the concentration of the substance for duration T2 (in hours); and Cn represents the concentration of the substance for duration Tn (in hours). (e) "work location!' means a location in a fac­ tory at which a worker works or may be required to w()rk at any time during any shift on any day. " 2. Limits of concentrations of substances at worl~ locations. - (1) The time weighted average con­ centration of any substance listed in Table 1 or 2 of the Schedule, at any work location in a factory during any shift on any day shall not exceed the limit of the permissible time weighted average con­ centration specified in respect of. that substance: Provided, that ·in the case of a·substance 'meIl­ tioned in Table 1 in respect of which a limit in terms , of short ti'rm maximum concentration is indicated, the concentration of' such a substance may exceed the permissible limits of the time weighted average concentration for the substance' for. short periods not exceeding 15 minutes ata time, subject to the condition that- (a) such periods during which the 'concentration exceeds the prescribed time weighted average concentration are re,stricted to not more than 4 per shift; ('0) the time interval between any two such periods of higher exposure shall not be less than 60 mininutes and ' (c) at no. time the concentration. of the subs­ tance in the air shall exceed the ,limit of short term maximum concentration. (2) In the case of any substance given in Table 3 the concentration of the substance at any work location in a' factory at any time during any day shall not, e",ceed the limit of exposure for that substance specified in the table. . . (3) In the cases where the word "skin" has been indicated against certain substance mentioned in Tables 1 and 3, appropriate ineasures shall be taken . to prevent .absorption through . cutaneous routes particularly skin, mucous membranes, and eyes as the limits specified in these Tables are for condi­ tions where the exposure is orily through respiratory tract. . " . . (4) (a) Incase, the air at any work ,location COIl­ 'tairis a' 'mixture of such substances ll\enti()ned in j \ 3RD MAY, 1985 (VAISAKA 13,_'1907;:..) ______________________ =189 Table 1, 2 or 3, which have similar toxic properties, the time weiglited concentration of each of these substances during the shift should be such, that when these time weighted concentration divided by the respective permissible time weighted average concentration specified in the above mentioned tables, and the fractions obtained are added together, the total shall not exceed unity, i. e. C, + C, + en ----""" - ' should not exceed unity L, L2 In When C" C2 •••••• en are the time weighted concen- tration of toxic substances 1, 2 ...... and n respec- tively, determined. after measurement at work loca­ tion; and L" L, ............ Ln are the permissible time weighted average concentration of the toxic subs- tances 1, 2 ...... and n respectively. (b) In 'case the air at any work location contains a mixture of substances, mentioned in Table 1; 2 or 3, . and these do not have similar toxic properties, then the time weighted concentration of each of these substances shall not exceed the permissible time weighted average concentration specified in the above mentioned tables, for that particular subs­ tance. (c) The requirement in clause (a) and (b) shall, be in addition to the requirements in paragraphs 2 (1) and 2(2). 3. Sampling and evaluation procedures. --' (1) Not­ withstanding provisions in any other paragraphs, the sampling. and evaluation procedure to be adop­ ted for checking compliance with the provisions in the Schedule shall be as per standard procedures in vogue from time to time. (2) Notwithstanding the provisions in para­ graph 5, the following conditions regarding the sampling and evaluation procedures relevant to che-cking compliance with the proviSions in this Schedule are specified. . (a) For determination of the number of parti­ cles per cubic metre in item 1 (a) (i)(l) in Table 2, samples are to be collected by standard or midget impinger and the ,counts made by light-filled technique. (b) The percentage of quartz in the 3 formulas given in item 1 (a) (i) of Table 2 js to be deter- mined from airborne samples. ' (c) For determination of number of fib'res as ,specified in item 2(a) of Table 2, the membrance filter method at 430 X phase 'contrast should be, used. ' (d) Both for determination of concentration and' percentage of quartz for USf) in the formula given in item 1 (a) (i) (2) of Table 2, the fraction pa~siIlg through a. size-selector with the following characteristics should «:lIllY bE? considered." Ae~~dynamic dia~et~r (U¢t density sphere) 2.0 2.5 3.5 5.0 10.0, P~xcen~ge allowed by Size-selector 90 75 50 25 o 4. Power to requireussessment of concentration of substances. - (1) An Irispector may, by an order in writing, direct the occupier or manager of a fac­ tory to get before any specified date, the assessment of the time weighted average concentration at any work location of any of the substances mentioned in Table 1, 2 or 3 ,carried out. (2) The results of such assessment ,as well as,the method followed for air sampling and !l-nalysis' for s~ch. assessment shall be sent to the Inspector wlthm 3 days from the date of completion of such assessment and also a record of the same shall be kept readily available for inspection by an Inspector. 5. Exemption. - If in respect of any factory ora part of a factory, the Chief Inspector is satisfied that; by virtue of the pattern of working time of the workers at·tIifferent work locations or on account o~ other circumstances, no, worker 'is exPosed, in -the an: at the work locations, to a substance, or subs­ tances specified in Tables 1, 2 or 3 to such 'an extent, as is likely to be injurious to his health, he (the Chief Irispector) may b~ an' order in W,rlting, , exempt the factory or a part of the factory fr()in the ,:requirements in paragraph 2, subject to lIuch conditions" if any, as he may specify therein. . " TABLE 1 Permissible l':mlts: of exposure Substance Time.weighted average con~ cetitraU~n Short-term '. maximum con~en:trat1o.n ppm mg/m3 ppm mg/m3 Acetic acid 10 25 15 37,' Acrolein 0.1 ',0.25 0,3 0.8 Aldrin-skin 0.25 AmmOnIa 25 18 0.75 ,35Z( Aniline-skin Anisidlne(O-p-lsomers)- 2 10 5 ,20 -skln 0.1 Q.'" , Arsenic & I compoundlf' (as As) Benzen~ . 10 Bromine 0.1 '2 Butanone, (Methyle- thyl Ketone-MEK) 200 n-Butyl acetste, 150; , ' sec/tert. Butyl acetste 200 Cadmium-dust and salts (as"Cd) calcium Oxide . Carbaryl (!levin) Carbofuran (Furadan) Carbon disulfide-skln 20 . Carbon mono~de 50 Crurbon tetrachlorIde ... -skln 10 Carbonyl. chloride (Phosgene) 0.1 Chlordane-skin Chlo..rbbenzene (mono chlorobenzene) 75 Chlorine 1 bis-Chloromethyl ether: ,i 0.001- ChromiC acid and chrbmates (as Cr) . Chromium, Sel. Chromic, ChroInoUS saltS' (as Cr) CopperfUl1le Cotton dust, raw Cresol,all isomers-skln 5 0.:;1, 30.1.- : 0.7·, 0,3 , 590 300 " 710 201) 950 250 0.05 2 5 0.1 60 __ '", ",30 55 "'.400 , ••.. 65 20 0.4-VI"" 0.5 "·;·;i;~. 350: '-'-' 3 ,3' 0.05 ~ 0.5 0.2 ,0.2 22 :I 835 950 1190,. ......... ,' :119 440 130 2, 9 0.6 , I 190 pern":tissible limits of exposure Substance Time-weighted average con­ centration Cyanides, (as CN) -skin Cyanogen DDT . (Dlchlor-diphenyl­ trlchlOr<>-ethane) Demeton-skin Diazinon-skin Dibutyl phthaIate ppm 10 0.01 Dichlorves (DDVP)-skln (1.1 Dieldrin-skin . DlnltrobellZl'ne (all isomers) -skin Dln!lJrotoluene-skin Diphenyl Endosulfan (Thlodan-- "skin) Endrln:skln Ethyl acetate Ethyl alcohol Ethyl emlne Flourides (as F) Fiourine Hydrogen cyanlde'skin Hydrogen sulfide Iron oxide fume (Fe,O. as Fe) Isoamyl .acetate. Isoamyl alcohoi Isobutyl alcohol Les.d,lnorg. fumes and dusts (as Pb) LIndane-skin Maiatli!on-skIi1 Ma1i'ganese fmne (as Mn) Mercury (as HIl") Mercury (alkyl c!>m­ p!>unds)-skln (as Hg) Methyl alcohol (metha­ nol)-skIn Methyl cellosolve-skin (2 methoxy ethanol) Methyl Is!>butyl ketone- -skin Naphthalene NickeI.carbonYI (as NI) Nitric acid 0.15 0.2 400 1000 10 1 10 10 100 100 50 0.001 200 25 100 10 0.05 2 Nitric oxide 25 NltrObenzene-$kIn 1 Oil mist-minerai Parati1ion--skiri Phen()l-skln 5 Phorate (thlniet)-skln Phosgene (ca.tlx>nyl chlooid.) 0.1 Phosphine 0.3 Phosphorous (yellow) .. Phosphorous penta. . chloride Phosphorous trichloride 0.5 PICric acid-skin Pyridine 5 Silane (silicon tetra- hydride) 0.5 Styrene, monomer (phenyl-ethylene) 100 Sulfur ·dioxl<\e 5 SulfuriC acid TolUene (toluol)_ 100 ~g/niS 5 20 1 0.1 0.1 5 1 0.25 1 1.5 1.5 0.1 0.1 1000 1900 18 2.5 2 11 15 5 525 350 150 0.15 0.5 10 1 0.05 0.01 260 80 410 50 0.35 5 30 5 5 0.1 19 0.05 0.4 0.4 0.1 1 3 0.1 15 0.7 420 13 1 375 Short~te.nn . maximum concentration ppm o.os 0.3 0.5 0.6 2 15 15 125 125 75 . 0-003 35 125 ·15 4 35 2 1 10 1 125 150 mg/rn3 3 0.3 .0.3 10 3 0.75 3 I> 4 0.3 0.3 10 655 450 225 .45 .1.5. 3 0.15 0.03 310 12!) 510 75 10 45 10 10 0.3 88 0.2 1 0;3 3 0.3 30 1.5 525 560 Perniissjb~e 'l)m,lts of exposure Substance Time-weighted average con-' centration Short-term maximum concentration o-Toludine Trichloroethylene Vinyl chloride Welding fumes (NOC) Xylene (o-m-p-isomers)- -skin ppm 5. 100 5 100 mg/mS, 22 535 10 5 435 ppm. 10 150 150 mg/mS 44 800 655 TABLE 2 Substance 1.. SiliCa (a) Crystalline (I) Quartz Pen,*ls.ible time weighted average concentration (1) In terms dus count of } 1050 mppem -:::-:::--:---:-":"-::-­ % QUartz + lO (2) In terms respirable dust (3) In terms of 1 totsl dust , (II) Cristoballte (III) Tridymite (Iv) Silica fused (v) Tripoli (b) Amorphous 2. Silicate having less than 1% free silica by weight (a) Asbestos-fibres lon- ger than 5 microns (I) Amoslte (iI) Chrysotlle (iii) Crocldoli,e (Iv) Other form (b) Mica (c) Mineral wool fibre (d) Porllte (e) Portlaridcement (f) Scap stone (g) Talc (nonahostiform) (h) Talc (fibrous) (I) Tromollte 3. Coal dust 10 mg/m' % respirable quartz + 2 30 mg/m' % Quartz + 3 Half the ibults given against quartz. Half the limits given against quartz. Same limit as for quartz. Sam~ limit as In formula In Item 2 given against quartz. 705 mppcm. 0..5' fibre/cubic centimetre. 2 flbreslcublc centimetre. 0.2 fibre/cubic centimetre. 2 flbres/cuelc centimetre. 705 mppcm. .10 mg/m'. 1050 mppcm. 1050 mppcm._ 705 J:llPpcm. 705 mpPC/ll. Same Iinlit as for as"bestQs. Same limit as for asbestos. (1) For airborn. e dust. hav.- } . Ing less than 5% silicon . 2 mg/m-. dioxide by weight. . (2) For 'airbOne dust, MV-} S.arne linilt as prescribed lng over 5% silicon dio- : by formula in Item (2) xide against quartz. . TABLE 3 Substance Permissible' lindt ot exposure Acetic anhydride O-Dichlorobenzene Formeldehyde Hldrogen Chloride ' .. Manganese & compounds '(as Mo) Nitrogen dioxide Nitroglycerin-skin Potassium hydroxide Sodiwn hydroxide Z. 4. 6-TrInltrotoluene (TNT) ppm 5 50 2 5- 5 0.2 mg/m, 20 300 3 ·7 5 9 2 2 2 0.5 .. ~ SRIJ MAY, 1985 (VAISAKA 13,~Q7'J)~ _______________ -'-___ _ 191 139. Information required by the Inspector. -The occupier, owner· or manager of a factory shall f~­ riish any information that an In~pe~tormay requIre forthe purpose of satisfying hImself 'Yheth~r any proVision of the Act has beencomphed WIth or whetherany'order or an inspection has been duly cari1.ed out. Any demand by an Inspector for :my such information if made during the course of ms­ pection,shall be complied with forthwith. if the ~­ formation is available in the factory, or if made m writing, shall be complied with' within. seven days with. report in writing .the loss' of th~ Inspection Book to the Inspector in charge of .the area and immediately open anew ,Inspection Book. '!'he manager shall obtain as early as possible copies of all available remarks for the Factory Ins­ pection Office concerned; on payment of necessary on receipt thereof. 140. Muster-roll. - (1) The Manager of every factory shall maintain a muster-roll of all the w!'r­ kers~-employed In the factory In Form 38 show~ (a) the name of each worker, (b) the nature of hIS work, Ijlld (c) the daily attendance of the worker. (2) The muster-roll shall be written up afresh each month and shall be preserved for a period of 3 years from- the date oflast entry in it: Provided that if the daily attendance is noted in respect of adults and children workers in the Re­ gisters of Workers inForms 10 and 20, respectively, or the particulars required under sub-rule (1) are noted in any other register,· and·· such registers are preserved for a period of·3 years from the date of last entry in them, a separate muster-roll required under sub-rule (1) need not be maintained. 141. Register of aooiden1<s a11d dangerous occur­ rences. - (1) The manager of every factory shall maintain a register of all accidents and dangerous occurrences which occur in the factory inForm 39 showing the- (a) name of injured person (if any); (b) date of accident or dangerous occurrence; (e) date of report on Form 32 or 33: as the case may be to Inspector; (d) nature of accident or dangerous occurrence; (e) date of return of injured person to work; (f), number of days of absence from work of injured person. (2} . The . manager of every factory shall furnish to the Inspector a copy of the. entries in Form 39, quarterly, on or before 15th April, 15th. July, .. 15th October and 15th January relating to the quarters ending 31st March, 30th June,30th September and 31st December, respectively and also before 31st J a­ nuary of each year of the entries for the year pre­ ceding, as required under sub-rule -(d) of rule 136. 142. Maintenance of Inspection Book.- (1) The manager of every factory shall maintain a. bound inspection book in Form 40 of the size 35 ems X 20 ems. and shall produce it when so required by the Inspector or Certifying Surgeon. (2). The Inspection Book shall contain at least 180 pages. Every third page thereof shall be conse­ cutively numbered and .the other two numbered pa­ ges between each two consecutively numbered pages shall have a vertical perforated straight line' on the margin side at a m;u-gin of. 2.54 cms. (3) In case the Inspection Book containing re­ marks passed by the Inspector or Certifying Sur­ geon is lost, the manager of the factory shall forth- tJpitig charges. . i43. Information regimling closure of factories. - (i) The occupier and the manager shall be jointly or ·severally responsible for sending information in duplicate, to the Inspector of any intended closure of the factory or any shift, section or department thereof, inmIediately after it has been dec!ded to do so, and before the closure takes place, statmg- (a) the date of intended. closUre; . (b) the reasons for closure; (e) the number of workers on the muster-roll of the factory on the day the information is sent ; (d) the number of workers likely to be affected by the closure; (e) the probable period of elosure: , . _ Ptovidedthat in the case of, any factory in respect of Which Standing Orders settled- or certified under the Industrial Employment (Standing Orders) Act, 1946 provides for the display of the notice boards of the factory of notice of the proposed closure of the factory or any shift, section or department thereof, such information to the Inspector shall be given on . the date on which such notice is displayed: . . P:rovidedfurther that it shall not be necessary for the occupier or manager to send. information of in­ tended closure if the closure is rendered. inevitable 011 account of fire, break-doWn of 'maChinery, stop­ page of power Or water supply or any other cause beyond his control. .. (2) The occupier and the manager shall be jointly or severally responsible for sending also information in duplicate to the Inspector as'-·soonas the" factory or I)lly shift, section or departplentthereof, is actu­ ally . closed .' hl . the. following form,., namely: . .,.- 1 l>' •• .; ~ ~~ b' ~ .d'at: C Ul-C G) ~ ~'E- ~ t-ll ~. • 1! ~~lL t:f"~ ,,0 ~~ ; 0 s'll 'll i=IoG)Joo . ~ 0" o-t! '" 0 ~~~!1 ~~~ ~Jl ~:g ti 'll " ~ i::~~~ ~~ ~ '0 'll~_ . ~k" ~~ ° t·!::::J-f::~'-· ~- ~ ,tS~,,", 0. • ~ e~!§ .0 0 U r ~ • ! slLs' A £~ .... :z. .:;:1 ..... ~ "$ ~5-g zg"" Z;, Z " ~ 1 2 3 ~. I'> b 7 .S . Class of industry whether. (1) Cotton Textile, or (2) Silk Textile or (3) Woollen Textile, or (4) HosiE;ry, or (5) Engineering, or (6). Miscellaneous, shOuld be stated. - . . -'(3)The ()ccupier and tAe manager shall be jointly or' severally _ re:>rioriSible for sending also" informa­ tion, in duplicate, to the Inspector as soon as the' 192 factory or any shift, section' or department thereof is re-opened in the following form,namely:- ..J'~ ~ ~ '" f.:s r,:'!3 bJl ~~ § i ~ <1I<d t!:' • ~ .. "'~ . ·~C .. ~ S . " ~cr3'= ~~''d "" ~ ".~ >'03<3;1 ~;::~ ~ .~ se '" 0", ,:: Po.go E <l ~~ ~ "'~C1I 20 ,\\0 ~'" ~$f ..... »-~~o "'" " o £ S-~'g ~ ~ O03(j 0 O"~ '3-- 0 t-g~ ~§~ "~~ ""'. • s ._0 ~ffi» '3, ~ " 'S~ . .0 54) r ~§Jj a,-A "8 ~t5 ~~ Z Z',;i f«%: ,C 1 2 • 4 5 6 7 Class of industry whether (1) Cotton, Textile, or (2) Silk Textile or (3) Woollen Textile, Or (4) Hosiery, or (5) Engnleering, or (6}Miscellaneous, should be stated., ,. ' ,Explanation 1. - For, the purpose, of this, rule, "closure" means the closing of a factory, or any shift, section or depar1:l!lent thereof or the total or partial suspension of work (other than work of a temporary nature) by the, occupier or manager.of the factory, or totaL or partial refusal by the occupier or -ma· nager of the factory to continue to ,employ perso~ employed by him where such refusal does not amount to dicharge, dismissal or suspension of a worker or workers by way of punishment. ' Expllznation 2.- This rule, sh!l-ll not apply in the case of a closure of any section or department of a factory if such closure does not affect the total number of workers employed in the factory. 144. Repeal andsa.ving.---, On the date, .of com. mencement of these rules, the Goa, Daman and Diu Factories 'Rules, 1965 shall stand repealed, except as respects things done or omitted to be done. FORM 1 Prescribed under "nile 3 Application for peimlssionl>, construct, exteiid or take intO' ROe any bulIcling 88 a factory 1. Applicant's name, calling and address ... 2. Full na-meand postal address of factory ... 3. Situation of the factory (a) District ... (b) Town or village ... (c) Nearest Police station ... '(d) Nearest railway station or steamer ghat ... 4. Particulars of plant to be installed ... Signature of applicant , Date: Note: TIi1s appllcati~n shall be accompanied by the follOwing documents: . (a) a "flow chart of the manufacturing prOGess B~pple ... , mented, by' a; brief, desCrIption' of the process ,In ~~ . vatious _ stages; . SERIES I No, 5 (b) Plans, in duplicate, drawn to scale ~howing:- (1) the site of the factory and immediate surround· ings including., adjacent buildings and other structures, roads, drains, etc. j and (ti) . the plan, elevati,on and necesSary cros&.~CtiODs of the various buildings indicating all relevant details relating- to natural lighting, ventilation and means of' escape in case of fire •. The plans shall also clearly indicate the position of the plant and machinery, aisles .and pasSage-waysj and '. (c l such other p.articulars as the. Chief Inspector may require. FORM 2 Prescribed under rules 6 ~d 15 Application for registration and notice of specified in: secti~ns 6 ·a,nd 7 (To 'be submitted in triplicate), 1.' (a) (b) Full name of factory Factory licence number if already registered before. 2. (a) Full postal address and situation of factory. (b) Full postal address to which" communications relating to factory should be sent. .3" ~ature of manufacturing p~ocess or processes. , (a) Carried on in the fac­ tory in the last twelve months (in the case of factories. already in ex- , istance); and (b) to be carrie,d on in the factory during the next ,twelve months (in the ,case of all factories) . 4. Name and values of prin­ cipal products manufactured during the last t wei v e months (in the case' of factOl:ie:;; .. already in eXis- tance'). ' , '5;' (a)'Maximutn number of workers proposed to be :employed on anY one day during tlie year. ' ' • (b)', Ma,ximutn number of . , " workers employed on ,anyone day during the last ,twelve ,months' (in the case of factories al­ ready in existance) . , . (c) N)l1llber of workers to be ordinarily employed in the factory. 6. (a), N'a.t u l' e and total amount of power (H.P.). (i) installed; or (it) proposed to be iI)s. tailed. Name 1. 2. 3. occupation Value, . ... ' i:.'. (b) Maximum amount of power (R. P.) proposed to be used. 7. Full name and residential address of the person who, shall be the Manager of the factory for the purposes of the Act. 8. Fnll name and residential address of the occupier that is- (a) the proprietor ,of the factory in case of a private firm or proprie­ tary concern. (b) the directors .in case of ~. a public limited liabi- 2. lity company or firm. 3. 4. ,5. (c) (i) the managing agent in case where a managing agent is employed. (ii) the directors of the 1. abo v e managing 2. agent. 3. "4. (d) the shareholders in 1. case of a private'com- 2. pany where no manag-- 3. ing agent is employed; '4. or (e) the chief administra- ,live head in case of a Government or factory run by a local authority or by, any statutory corporationor'body. 9. Full name and address' of the owner of the, premises or:" buifding (inCluding l .. lJe 'precincts thereof) referred to in section 93. 10. In the case of a factory constructed or ext end e d after the date of commen­ cement of these rules. (a) reference number and date of approval of the plans for site, for old or new buildings and for construction or exten~ sion of factory by the Govermnent Chief Ins- ," pector, and (b) reference number and date of approval oJ; the, , arrangements, if any, made for the disposal of trade' waste and aF fluents and the name of the, auti).ority granting such apprQval. 11. Amount of fee paid, ... (i) name of treasury ... (ij) date of payment and ~ .. (iii) c hall a n number .. : Notes: (challa,n to be enclosed) Sig';ature, of occupier, . Date: Sign~ture of Manager Date: 193 Rs .... 1. This. form should be' .completed' in ink in hlOGk letters or typed. 2. If power .is. not· used at the -time,; of" filling. up' this form, but is introduced later, the fact should be communicated to the Chief· Inspector of Factories immedIately. ' 3. ,If -any of the persons named 'against item 8 is minor, the fact should be clearly stated. 4. In the case of a factory where under -the' proviso to sub-sections (1) and (2) of secti9n 100. a person has been nominated as- the occupier, information required ;b;t item 8 should -be supplied only in respect of that person. 5. ' In the case of a factory where a managing agent or agents have beeD:. appointed as occ~piers under the Indian Companies Act, 1956. information required in ·.item 8- should be supplied only in respect of that person or persons. FORM 3 . __ (see rule 6) Application for licenoo/renewal of licence' of a factory fO~ :.~he :rear ... .-.~,;_.:< 1. Full name of the factory; 2. Full postal address, and si - "'~- , tuation of the factory; 3. ]'ull address to which commu­ nication should be carried i where the factory addresses' . serve the purpose of com­ munication also· this infor­ mation,need not be.given) ; 4. Maximum number of work­ ers to be employed on any day during the year; 5. Installed R. P.; . 6. '(a)' Amount of fee paid Rs. (li) Treasury receipt number and date; - Date: Signature of Occu­ pier /Manager of 'Factory 194 FORM 4 Prescribed under rule 7 Licence to work a factory Registration number: Fee paid Rs ... . Licence number: Excess/Due Rs ... , Licence is hereby granted to ... valid only for the premises described below for use as a factory em­ ploying not more than ... per:sons on anyone day during the year and using motive power not exceeding ... H. P., subject to the provisions of the Factories Act, 1948, and'the Rules made thereunder. This licence shall remain in force till the 31st day of December, 19 .. , Description of the ~ieensed Premises The Licensed premises shown on plan number dated ... are situated in .. , and consist of ... Date: Place: '. Chief Inspector of Factories. 1 2 3 .~ ..... _---- NE/E. NE/E Renewals See rule 9 4 E/d 5 6 NE = Not exceeding e = excess paid E = Exceeding d = due to be,paid. (Back <lide Of Form 4) 1 2 3 4 5 &nendments " ~" -". Amen~ed ~~ Zi!~ Workers Installed ::;- To whom transferred Year of transfer power capa- city in H.P. Date of payment of transfer fee 6 ~~ ~ ~>. @~ ~ .s::;';:l ~ --St:; ~ a 0 l;'~ " l;' ~~ "a " " ~" ~" 0 0\\ ., ~ E" ~§ ;;; -" " S "." ". ". • oo~ A~ A Signature of the Issuing Authority .FORM (\ Prescribed under rule 1:6 Notice of change of Manager 1. (a) Name of J;actory (b) Current licence nUmber of factory . 2. Postal address of factory 3; Name of the outgoing Ma­ nager 4. (a) Name of the new Ma­ nager (b) Residential Address (c) Telephone number 5. Date of appointment of the new Manager . 6. Signature of ·the new Mana­ ger Signature of Occupier Date: ~ FORM 6 Prescril.:lIid under rule 19(2) ·Certiflcate of Fitness 1. (a) (b) Serial number Date: 2. Name of person exa­ mined 3. Father's name 4. Sex 5. Residence 6. Date of Birth if avail­ able and/or certified age. 7. Physical fitness 8. Descriptive marks 9. Reason for- (a) refusal of certifi­ cate- or (b) Certificate being revoked ... Signature or left hand thumb impression of the person examined. Initials of certifying Sur­ geon. ----- · Serial' number Date I certify that I have personally examined · (name)' ... son/daugh­ ter of ... residing at ... who is desirous of · 'being employed in a factory, and that his/ /her age, as nearly as can be ascertained from my examination, is ... years, and that he/she is fit for em­ ployment in factory as an adult; child. His/her descriptive marks are Signature or left hand thumb impression of the pers()n examined. , Signature' of Certify­ ing Surgeon Note: - In case of physical disability, the exact" details of the cause, of the physical disability should be clearly stated, • 195 FORM 7 Prescribed under rule 19(7): Paragl'aphs 2(c) and 24(2) of Schedule III; ParagJ;"aphs 1 (e) and il(2) of Schedule IV; Paragraph 10'(2) or Schedule X; P3.lI"agraph 11 (10) of Schedule XIV; Paragraph 14(3) of XVI; Paragraph 19(d) of Schedule XX; and Paragraph 13(2) of Schedule XXI to rule 131 '-'\, Name of the (a) Shri (b) Shri (e) Shri Health Register Certifying Surgeon: .............. -........................................ . From From From ...... ," .. ~ ~ .\ ..... "." ... to to to ................•...... . NOTE: 1. Detailed s~ary of reasons for transfer· or discharge should be stated in co)umn 8. ,. 2. The result of medical examinati\?n should be expressed a'S fit/unfit!susp.ended- in' column 11 .. '", ~ ~E -0 ~e 'S'S )::. d FORMS Prescribed under rules 21 and,53 Reoord of llmeWashing, p'ainting, ~te. S:':) ~.,j Date on- which Ume- washing, painting, varnishing or oiling .o'g~~ ~~'g was carried out ;loffi rn~ .~';=s Date Month Year ~f!"'o ~'" ~ ~.~ . ..;.a~ ~ cS "d ~ e>'o!=~"d ... ·b9o! Q)~v "'~v~ I e ~ I til +''1:1 ...., ~ ... ~.S::!,~, ~E E , . Po :l,o,s I ~,,~ _. -J ------- ---- I I . I I i , , I . I I I I I . I I - Remarks Signature of Manager _Date:' Department: FORM 9· Prescribed :under·' rule) 29 Humidity Register' Distbietive .mark or number .... Position in Higro meter department." Year ." Month 1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th 11th 12th. 13th 14th 15th 16th 17th 18th 19th 20th 21st 22nd 23rd 24th 25th 26th 27th 28th 29th 30th 31st ___ ~~?-ings, of Hygroll!.e"t"er'-___ _ ~+'~ 'll' ~$ .~ . ~,Q" • -" "~ rl """"v .. §g •• 513:5;:- 1iHt, . ." ,," ~: <Il •. ~ ~ vii"" 0-~"'-~cq""'$ ~o' I:I~ .~ ,,~ ~~~.E ",,; ~" ~- Dry Wet Dry Wet Dry Wet bulb Bulb Bulb Bulb bulb bulb Certified that the above entdes· are correct. l'" Signature and designation of the' person taking the reading. 196 FORM 10 Prescribed under rules -61- and 80 (1-) Register of workers employed for work- on or near machinery in motion 1. Name of the worker and Desig­ nation 2. Serial number as in the'register of workers under section 62 3. Father's name 4. Date of birth and age 5. Nature of work 6. Qualifications, if any, or period . of services on similar work 7. Date when tig:ht fitting clothing was provided 8. Remarks I certify that. the above mentioned worker whose signature or left hand thumb impression is given below is a properly trained male adult worker who is competent to mount or ship belts, lubricate or do otber adjusting. operations on the machinery ins­ talled'in my factory while they are in motion. (d) other gate fastenings ... (e) Cage and platform and fit.tings cage guides, buffers, interior of the hoistway or liftway (f) Overrunning devices ... (g) Suspension ropes or chain and their attach­ ments ... (h) Safety gear i. e. arran­ gements. for preventing fall of platform or cage brakes .. . (il Brakes .. . (j) Work or spur gearing '" (k) Other electrical equip- ments ... (1) Other parts ... 4. What parts {if any) were inaccessible?' ... ,5. Repairs, renewals or altera­ tions (if any) required and the period within which they should be executed ... Signature or left hand thumb 'impression of \vorker 6. Maximum Safe \vorking load subject to repairs, removals or alterations (if any) speci- Signature of occupier fied in item 5 ... ' .. Date: FORM 11. . Prescribed under rule' 65 Report of ecilnination o~ ~iSts and lifts Occupier (or owner) of premises Address 1. (a) (b) Type of hoist or lift and identification number or description ... Date of construction or re-cOlfstruction . (if . as- certainable) ... 2. Are all parts of the hoist or lift of good mechanical cons­ truction, sound material and adequate str£ngth (so far as ascertainable) ... 3. Are the following parts of the' hoist or lift properly maintained and in good working .order? If not, state what defects have been found. . (a) Enclosure of hoistway or 'liftway ... (b) Landing gates and cage gate(s) ... (e) Interlocks on. the land­ ing. gates and cage' gate(s) "-'-'-.-""",=",,,,=,~, ~",."""."":,""","-",,,,",,;,,,, 7. Other particulars", I/We certify that on (date) .'" I/We thoroughly' examined this hoist or lift and that the above is a . correct report of the result. Signature ... Qualification ... Address' ... Date '" If employed by a company or asso-· ciation, name and address of the' company or association. FORM 12 (See nlle 67) R(!pol't of Examination of the lifting machines, rope§ and-;: lifting. tackles PARTICULARS 1. Name of occupier of factory 2. Address of factory 3. Distinguishing. number of mark if any and description sufficient to identify the lift­ ing machine, chains, rope or the lifting tackle 4. Date when the lifting ma­ chine, chain, rope or lifting tackle was first used in the factory I I .3RDMAY, 1985 (VAISAKA 13,1907) :5. Date of each examination made under section 29(1)(a) (iii) and by whom it was carried out .6. Date and number of the cer­ tificate relatil).g to any test and examination made under sub-rule (1) of rule 66 toge­ ·ther with the name of the . person who' issued the certi- ficate .. '7. Date of annealing or other heat treatment of the chain and lifting tackle carried but under sub-rule (5) of rule 67 and by whom it was carried' out . :8. Particulars of any defect found at any such examina­ tion or after annealing .and affecting the safe working load and of the steps taken to remedy such defect I/We certify that on ... , I/We thoroughly, exa­ mined the abovementioned lifting machine/ chain/ /rope/lifting tackle and that· the above is a correct . report of the result. .:Signature ... Countersignature ... 'Qualification .Address :Date ... If employed by a Company or Asso­ ciation give name and address. Date FORM: 13 Prescribed--under rule 68(9){b) . Report of- ~minatio~ ~r Test- of Pressure Vessel or Plant 1. Name of occupier (or factory) 2. Situation and address of factory 3. Name, description and dis­ tinctive number of pressure vessel or plant ·4. Name and address of manu­ facturer and reference to the i r test certificate or certificate of competent· person 5. Nature of process in which pressure vessel or plant is' used ,,6. Particulars of pressure vessel or plant (a) . Date of construction (b) Thickness of walls (c) Date on which the pres­ sure vessel or plant was first taken into use (d) Maxinlum permissible working pressure re­ commended by the manufacturer (e) Design pressure, if known (f) Brief history of pres­ sure vessel or plant, indicating whether the examiner has seen. the,., ' last· previous report. , 7. Da.te of last hydrostatic test (if any) and pressure, applied 8. Is' the pressure vessel or plant open, or otherwise exposed to weather or to dampness! . 9. What parts (if any) were inaccessible? 10. What examination and tests were made? (Specify pres­ sure if hydrostatiC" test was carried out) . '.0 11. Conditions of pressure ves~, sel or plant, (state any defects materially affecting . the maximum permissible working pressure or the safe working of the pressur'e vessel or plant) External: '12. Are the required fittings and appliances provided in accordance with the rules in force? 13. (a) Are all fittings and 'appliances properly mahi~· tained and in good condi­ .tion? (b) Have the pressure set­ tings, been che<:kedand corrected! 14. (a) Repairs (if al}Y) re­ quired Internal: (b) Period within w h i c h.., " the repairs should be' executed (c) Any other condition; j' which the person mak- ing the examination'., thinks it necessary for" securing safe working,.' ,'" 15. Maxinlum permissible work­ ing pressure, . calculated from dimensions and from the thickness and other data ascertained by the present examination due allowance., being made for conditions of working if unusual or ex- .. ceptionally severe. . (State minimum thickness of walls measured during the exa­ mination) 197 198 . 16. Where repairs affecting the the maximum working pres­ sure are required; state, the working pressure- (a) Before the expiration of period specified in item 14 (b) after the expiration .. of such· period:df' the re" quired repairs·have'not been completed (c) after the completion'of, the required repairs 17. Other observatiol).S'· SER,IES. ['No.' 5 I certify that on (date) .. ; the pressure vessel or' plant described above was thoroughly cleaned . and (so far as its construction permits) made accessible< for thorough examination and for such tests, as were necessary for thorough examination and that on the. said date, I thoroughly examined this preSsure vesseL or plant, including its fittings, and that the above, is·,a true report of my. examination: ., •• :, ... '. FORM 14 Signatrire ... '. Qualificatiori . Address Date .. ,: - ','.' If employed:' by accompany' or . asso-: . . ciation,.name.and.addressiof the company or association •. Prescribed under rule 81 (8) Register of Examination 'of Gasholder -Z t Pq.rticulars of mallufac~ure s:;; ~~ o Q !ll)tz § ~.... I .... ;a 0 ~ .?.~. I .~ -:: 1 .Jj ~ <\) " " :;;... ~ $~ 1 , __ A_I __ ~_I_ , 1 1_..:2"--_1_--'C";';"_ I §, , ~~ " 2 5:0 Sf! 0" "0 UQ -~t 1 I g.5~ -d 0 S " $~ I 'S '.' 1<£ _s ___ 1 d dU z ~ " 3 .' 4. 5 I '-,: -~ ~\ -', . 1 , I I ~, : FORM 15 Prescribed under rule 81(8) Particulars of examination . ~arried out under -"s,~n,,-b-,-,-ru.,.l::,es,--__ ~i ,.;,;.._,.;,;.. .--=1?.::.ar:.::ti:.::cu.::.l.::.ar:~s-.· .::.or--=re:::p=ail'-,--~ __ Lh~ I I 1'::,5]0 -'1" ~<1l:::: . ~az ?A ;.,~ £.0;2 ~ 1-, -6--, 1-,--1- I I I I , , I I " .~ ~ ',,, ~~ ! '"B rr. g.::: Mt; (Il '1>"=' ~= ,Sa ..... - ~. .1 M~ ~.;a 04>;:: E I ~,~ , oC. _'.-- ,'§.~~ .~ ! . z· $ 'g": . >.~' . . I . " dej . <1~MO "Q " '"d".5~ 000 ". " _.,!:::= ~ ~.9' 't$od_ 1 0" ~- " ss <Q'S Od d" • ". 0"" o~ .- <P .... 0<11 £~ 'd S ' S"<fl ~-A F C'Jc;I ._'. f!I...... I '. __ '--_!~~-"-_i_--,,--_I--I-0-1-. -~i--··· ~JI·-·-13- I. ' , I .. I . , t I ~s ~ llJl8.·:a ,- .. ,00 ~ 7 !-8--.. -\ 9· , I I I 1 I i , I 1 I I I II I I 1 I II 1 Signature ofOcctlpier or Manager ' Report of Exaroliiation of wa~r seal'ed gasholder 7. Parts of the gasholders examined by the .electronic or other accurate devices or by cutting sample discs and results thereof. 1. Name of occupier:. (01' fac­ tory) . '2. Situation and address of factory ... 3. Name, description, distin­ guishing number or letter and type of gasholder. . 4. Name and address of the manufacturer. 5, (a) Number oflifts ". (b) Maximum capacity.in cubic metres. (c) Pressure 'thrown by holder wheid'ull of gas. I , . --- S. Particulars of, gas to be stored in the holder. 8. Particulars as to the con­ dition of- (a) Crown: '" (b) Side sheeting, includ­ ing grips and cups; (c) guiding mechanism (Roller carriages, rol­ lers, pins, guide rails or ropes). (d) tank; and ... (e). other structure, if any (columns, framing and· hracking). 9. Particulars. as to the po.si­ tionof the lifts at the time of examination. .. .Jb f 3RDMAY, 1~85 (VAISAKA 13, 1907:.!.)_~~---c~-,-___ --:---:-_~--:----'-'---'----:-:---:---:--'- 199 10. Particulars as to whether the tank and lifts were found sufficiently level for safe working and if not, as to the steps taken to remedy, the defect... ' 11. Date oftiximination and by whom it. was carried out. 12. Condition of vessel: i (a) 'External .. , l, (b) ! Internal ... , 13. (a): Are all fittings aM ,appliances proper~y : maintained and in gopd , condition? (b)' Repajrs, if any, requi- " ~ '" ~ :s " ~ Ul "1 • * -" • red and period within . w h ic h they' should be executed. " E .~ 0 ... -0 ~ .0 0 E " " .~ ~'" " .~" " 00 ,.I:;(~ ~S .s~ ~~ " E :::: ",0 " ~ "''' ;; "" - aI:c " . '" 0 ~E ,o~ '" EM " "~ 0 z ,;;; 2 3 4 5 " '" 0 E " 0 ,,- ",' -5* •• 0 s::: -" B _.0 :.:::.~ - g .g~~ .0 ~:v -~ £~ § ." " ... ~~ '0 ~" " og .=~ 00 - " d O~O .> '" 3E~ -a .. ~'g .' • E A 0 " "" ~d ,,~ z A~ ~v Eo 0 z '" 1 2 3 4 5 (c) Any. other condition which the per:son . making the examma­ tionthinks it neces­ sary for securing safe working. 14. Otnerobservation . ::' .. I cemfythat on (date) ... the gasholder descri­ .bed above wasthorougIily e"amined and such of the tests, as were necessary Were. made on the same day and 'that the above is a true report of my exa-mina.tion. '... . ..... ..; .. . ... FORM 16 Namk Signature Qualification Addr'ess Date; .. , "." ,-' ,." If en:).ployed by a company or;an association, name and address of the com- o ",.,',_: ,',','._ • __ ',. j pal1Y' or asSO'clation. ' .. Prescrib~d under rule 111 Register ~f Compe~tory Holidays Weekly rest days Date of compensatory lost due -to the exempting holi~ays given: in order in -5 • -5 " ~ ~ " ~ .0 - ~ " " " E • " S );l. " E .s~ );l " E .., .., 3 '" .'" '" 3 • ~s 3 3 • Ul "'. UJ " 3 0 0 " 0 ~. ~~ 'i: " 8A " ~ • " ~ " " '" " '3 " -: '3 .. .., .., .., 7 8 9 10 11 12 13 14 15 16 FORM 17 Prescribed under r!ll~ ,,113 Overtime Muster Roll for Exempted Workers Month ending ... J9 ... " ~ ' .. " .s2 " s "0 ;:::I ..... ~ g,. .. "' o~o ,,'" .. " .. o. .. ,,~ M = .. "~ "- " ~ .S " ~ .. "'''' g "'0 ~ 0 'il " >. ~o "l ~ ~ '" Os S ........ J,.., '" "-'4>= E =.c,o~ 0-0 ~ - ~!3 oveot: .. • • g ~p:: Q) 8 " " 0 .. " >OUl> S ~.!<:~ ~ " S ~~ o "' '"'50, E S "'0 - B "' 'dJJ~ 0 -~ - " 0 :a Z do " ~ ~ « c:i:;; .... Eo • 0 .- > «~ 0'- 0 z"'· A 6 7 8 9 ' 10 11 12 13 I f I· 200 SERIES INa. 5 FORM 18 Prescribed under rule 116 Notice of perioda, of work for adult worken Name of factory ... Place ... District Men Women Description of groups Periods of work . Total Number of Men emploYed Total number ot wom:en employed Group i~tter.1 Nature ot Remarks work ,A B C D E F G H I - - -' Relays 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 ~ 1 2 3 , On working days I From ..• To ..• I, I. From .u To ... '" From ... To .. ~ On parti~l, )'Iorking days From ... To ... From .,. , I To ..• I Date on which this notice is first exhibited. Sign~ture of Manager Date: w w 0 , • '" E '" ~ • ~ ~ • ", 0 ~ 0 !ll • ~ 1 2 3 4 FORM 19 Prescribed under rule 117 Register of Adult Workers ~ 1: o.~ 0 ~ g~ tiE ~ 0 , ~o f 0" ~ '" ~ $- 0; >l 5 • ~~ ~~ 0 ,~ ~." 0" ,~ 0-",,, §8 Z~ ~ 7 Number and date of certificate if an adolescent Number of certificate and date 8' Token number giving reference to the certificate 9 10 I l "-,. , ~I 3RD MAY,. 1985 JVAiSAKAJ3, 1907)~~~~~~~_ FORM 20' Prescribed under' rule 121 Notice of periods of, work f~r Cbild Workers Name of ·factory .......................... _Place .................. .: ..................... , ..... . . i Chlldren Period of work I . Total number of children employed i Groups i A I B I c i \ Relays 1 2 1 2 1 I i I ! i i From i I , I i ! i i To: I I I i Date -on which this notice is first exhibited. FOEM 21- Prescribed' under rule 122 Register of CID.!d Workers . . 2 201 ~~~----- l:>istrict . ...................... . ......... , ........ . I I I I i . Description of gro,up Group I Nature Remarks letter I of work I A B I C Signature of manager Date: Serial number! Namo i address name Dute o.! flrst certifIcate giving leference group as III working , Remarks ' Residential Father's Number of Token number: Letter of I relay. if I I, I I I i J.\hunber of I • -.. -------.~~?~',--.. -.. '--c-'=\-----~~--·-t--'-I~·~-:l~ :""1 " -~2'J=. ", ~,,~~:··~~.~~~:~o_-_-._- Faetory .. ' Department 1 2 3 4 I I , I FORM 22 (See .rule 123) Regis~ of leave 'with wages Part I - Apults Part rr - Children Name .. ' Father's name .. ; NUmber of days worked during calendar year 6 7 8 I I .~ Leave with wages to credit 10 11 12 ,I i I , ~ ib !l ~ J ~ g' S ~ o· " ~ m .g ~ f!1. $: ~ ~ i g g f,l- [ [g. ~ i Whether leave I . with wages 1.10-1. refunded in . 1 w accordancc with I . scheme under ___ ____ ____ _ i _____ · sect_~~~_79(8) I f Whether leave with wages' not desired during the next calendar yenr '" ,8" " ". o (\),~ 3 ID< t: I .0 , e.:tj I 8 ~ S; ·--------------I~------~-~--- II-' Balance to I <» Credit ----·---l·T--------- 1 ).-l I -Normal rate· I -l of wages i -------- .•.•. ,._-- _. _._----_.- -----_. ! Cash equivalent 01' advantage accruing through concessional sale of food grains or other articles 1:1. ______ _ I· I Rate of wages for leave with ot columns 17 and 18) ~I wages , ~ period Hotal ----e ! I ~rt I gl f~, '·-I---~~;g~·:-I i Q. o~'C:J8l! ~ ~ S:::~""'<t>egC) Q"Q .,' C)~(;' .. ~::;.~ ~ ~~Jjt.; ~ ---_._----,._--,-------- ~ I il' ~ ~ 3 ~I 3. ~ I ,., ? ! ~ " " ... '" '" ~ ~ .., '" "' i5 ::: ti Sr. No. Serial No, in the Register of adults/chUd workers· Date of .entry into service Calendar yenr . of service Number 9f days of work performed Number of days of layoff Number of days of maternitY' leave with wages Number of days of leave with wages enjoyed Total of colums 5 to 8 Balance of Leave with wages from· preceding year leave with wages earneQ: during· thO year (mentioned in column 4) Total of column 10 a~ld 11 f ~ ~ ~ t !l.' g. " S' " tl. § ~ ~ o ~ . i ~ i :; ~ ~ I "1 ~ f ~ l1. ~ f 'tI 'tI ~r.~W;g 1=1 H ~ ~ ~ II ~ ~ ,,; ~ ~ r El' g, ill' j!j !t g ~ i " ~ ~ @' I S' ~ ~ 0\- '" ~ lti _. ____ ~_, ___ J __ Whether leave with wages refu3ed in accordance with scheme \tnder Section 79(8) Whether leave with wages not desired during the next calendar yeur I-":'j .t~ t'! .-; Jq (!) o iY.'" I-' : :;' -4 0'11 <tC'P ! 8,~ : 1-3 ~.=; i 0 (!) 0' ---_ .. -----_.- .---- .. ---~-~-- :; Balance to Credit ------.j-,-~~ .. _ .. _ .. -------- 1 ~ NOl'mal l'ate _ ... __ . ___ ._. 1-' of wage. Cash equivalent or advantage f accruing through t? I concessionul t sale of food I gl'utno or: other . ___ --__ I ______ .~ I ,~ , ~ i Rate of wages for leave with wages period (total of columns 17 ancl 18) -- -----1-;------··· I I ij'tJ -_ ... _.,._-_. I:¢' o_f:! Q' :;r<+ I I ",rtI i I '1 ~ , 0 I---~'", 0 I ",0" ~ SI"' • tJ i~ p-o&.'t$SIl' I""' ~~,...,CD~gS- !;' ! '" , ~is-'g~2. _~______ ,,_. _.~~I __ ~ __ @ g ~ I ~ ' I, I ' -·----1 * : I' I ~ i' ts ~ ! , rt' ~ g " t ~. ~ l:l "" I~ 1 1>.l ~ ..... ~ ..... !<:' !=> "" .,b. - oSRD MAY:, 19.85 (VAISAKA 13, 1907) 203 --_._--------_._----_._--------== FORM 24 (See rule 129) Nomination fo;i.". payment of pay due for pexoiod of holidays in the event of death of worker .I hereby nominate Shri ... who is my ... and .~esides at ... to receive the amount of the balance :of my pay due 'for the period of. leave with wages not availed of,. in the event of my death before re,.;mming work. Dated this '" day of ... Hi , a~ 'Witnesses: 1. Signature or left thumb impression of the worker. FORM 26 Prescribed under Paragraph 8(1)- of Schedule n to rule 131 Special Certificate of Fitness Serial Number ... Date ... I hereby certify that I have personally exaJnined Shri ... son of Shri ... residing at .,. who is desirous of being employed as ... in the ',. and that 4is ,age, as nearly as can be ascertained from my examina­ tum, is .,. years and that he is, in my. opiniqn, fit foreinplqyment in .... . . . , , His. descriptive marks are: . Signature or left hand thumb impression' of . the person employed , ;.' .... ,::: ( .• ? \ . J Signature of Certifying Surgeon. I certify that . I examined the person mentioned above on Date: I ex.tend this certificate until Signature of certifying surgeon Note of symptoms FORM 26 Prescribed under Paragraph 9 (2) of.-Schedule II'to rule 131 " • -~ g £ • '" 1 >. ;: ~ ~", oS ~. ~ g§~ g1: 0. -" • ~'" ",0 ~-c. ::~d a~ oil _0 "- ~~ • !: 0 •• ,30 "" ~Sg; .. ~ -'" " A ~ 3 4 5 FORM 27 Prescribed under Paragraph 6(2) of Schedule V to rule 131 Health Register " • b, w " .. :g~ cat) ...... ~s:::~ ....... ~§:=:.-. ~$g~~ -0 ~§w.fi~ (58. .e'g'g- q):;1£;E P::~<PS::: "'--" 5 A'g ..... .E~~ .~~I-!.;S~ 00 +'.1::'1:1 .... [jg ~",. °ri"~ <P M:::: ;.. ;.. ~.- ~s ."" \PM· ......... cl°~OO ~11>i::'-' ~" A ~- 0 A G 7 8 9 3. Total' pressure drop at- Report of Examination and Test of Dust Extraction or (a) Joints . (b) Other points of system. (to be 'specified) . Suppression Sys""-..em 1. Description of system 2. Hood- (a) Serial number of hood (b) Contaminant captured (c) Capture velocities (at points to be specified) . (d) Volume exhausted at hood . (e) 'Ho~d! staticp=slU'C . Design value Actual value 4. Transport velocity in duct (at points along ducts to be specified) 5. Air cleaning device­ (a) Type used (b) Velocity at inlet (c) Static pressure' at inlet (d) Velocity at outlet (e) StatiC pressure at outlet 6. Fan- (a) Type used . (b) Volume handled (c) Static pressure (d) Pressure drop at outlet of fan .. • ~. 0'<> • 0. ; -4)-2!~ 8 .0 ~$ .... :;l SP. ..... .:2~= ~ . <'3b1)SU Z~ g<u ~ . ..... :J.t A :tr.l •. ,10 11 . .-( 204 7. Fan motor- (a) Type (b) Speed and power in kilowatts 8. Particulars of defects, if any, disclosed during test in any of the above components I certify that on (date) ... the above dust extrac­ tion system was thoroughly cleaned and (so far as its construction permits) made accessible for tho­ rough examination. I further certify that on the said date, I thoroughly examined the above dust extrac­ tion system including its components and fittings and that the above is a true report of my examination. Signature ... Qualification Address . Date ... If employed by a ·company or association, name and address of the company or associa­ tion ... FORM 28 Pre:scribed under Par~o-raph 12 of Schedule VI. Paragraph 11 of Schedule VIll. Paragraph 10 of Schedule X. Paragraph 17 Of Schedule XI and Parag1raph 13(2) of Schedule XIX of rule 131 Special Certificate of Fitn .... Serial Number: . Date: I hereby certify that I have personally examined ... son of.... residing at ... who is .desirous of being emplOyed as ... in the ... and that his age, as nearly as can be ascertained from my examination, is ... years, and that he is, in my opinion, fit for employ­ ment at work involving the use of .... His descrip­ tive marks are: Signature or I eft hand thumb im­ pression of person examined Signature of Certi­ fying Surgeon Date: I certify that I examined the person mentio-­ ned above on I ex.tend this certificate until Signature of Certifying Surgeon Note of Symptoms of lead poison~ ing (it -any) SERIESi No; 5 FORM: 29 Prescribed under-Paragraphs 11(1) and (8) of Schedule, XIV to rule 131 Oertifica~ of fitness for dangerous operations 1. Serial number ... 2." Name of person examined ... 3. Father's name 4. Sex ... 5. Address ... 6. Name of the fac­ tory in which employed/in which wishes to be employed ... 7. Process of de­ partment in which employed/ wishes to be em­ ployed ... 8. Whether certifi­ cate granted ... 9. Whether declared·· unfit and certifi­ cate refused ... 10. Refenmce number or previous certi­ ficate granted or refused ... 11. Signature or left hand thumb im­ pression of persOn examined ... Signature of Certifying Surgeon ... Serial number .... r certify th:i.t I have jJer-· sonally exa Ii!. in e d (nam·e) son of· (father's name) ... resi­ ding at (address) ·who is desirous of bemg employed as ... in (naIlle of factory) .... ,in (department and pro­ cess) ... and t hat as nearly as can be ascer­ tained from Illy exami­ nation, is fit/unfit for employment at the above noted factory. 2. He is fit to be employ­ ed and ·may be employ­ ed on some other non­ -hazardous operation such as 3. He may be produced for iurther examina­ tion after a period of ... 4. He is advised following further examination ... 5. He is advised following treatment· ... 6. The Serial number of the previous certificate is ... Signature or I eft hand thumb im­ pression of person examined . . Signature of Certi­ fying Surgeon. Notes: 1. The counterfoil should be retained by the Certify­ ing Surgeon and maintamed in bound book or in a file. 2. The Paragraph which does not apply may be can-· celled. ' FORM 30 Prescri~d under Paragraph 21(3) of Schedule XXIII to rule 131 tJertifiQate of Fitness Serial number I certify that I have personally examined (name) ... son of (father's name) ... residing at (address) ... who is'desirous of being employed as (designatlon) ... in (process, departlIient and factory) ... and that , . .' 3RbMAl'; 1985 (VA/BAKA 13, 1907) . I extend this i certiticate until his age, as nearly as can be ascertained from my examination, is ... years, and that he is, in my opi­ nion, fit/unfif for employment in lheabove mention­ ed factory as mentionlld above .. (if certificate· 1 Ie:.~\~e:~e i iih~O~e~~~~~~:.;. 3~~:a ~bC;:;;:f ~h~i~~Wf~~ person mentio- : which the. worker during exami- I Surgeon 2. He may he produced' for further examination after a period of ... ned above on I is considered- , . na~ion , j unfit for wort\: "j i ,is to be I I mentioned) , 3. The serial number of the previous certificate is...· . ._- I~--~--'" "'------ - i Signature or Ie f t hand thumb im-. pression of person examined. i o i ,,' .1 1 I Signature of Certi­ ,.fying~ ... I i Date: i I I i. I I. ... , 'i i: FORM 31 Prscribed under Paragraph 21(4). of . .. SChe<iule xxrn to rule 131 O ... It!> Register 10 1, , l i .! I i I o. :'1' I I 1 I ,;.-, I .1 . FORM 32' Prescribed under Rule 132' (3) Report of accidellt or· dangerous:·Occianea.ce 6. (a) Sex ... ;,' . ;;;VJ '..; :.- . resulting q,. .deatb..or ~y injury .• E.S.I.C. Employer's Code Nunlc ber. 1. Name of occupier (or fac­ tOry)/employer. 2. Address or workS/premises where the accid,e,nt or tdooauk-' . gerous occurrence place. 3. Nature of industry. 4. Branch or department and exactpiace where the acci­ dent or dangerous, occur­ rence tOok place. 5. Name and' address ,Of ·the injured person. E .. S. L C. Insu" . r3.nce Number of the injured .. person. (b) Age (at the last. bir- thday). .' .. .• (c) Occupation'or'the': In~ jured person"·.·· ,....... · 7. Local E.S.I.C.· Office to which the injured person is attached. 8. Date, Shift afid·>:·!i.offi.6f.: ",,-,. accident or dangerous occur,' . "." rence. '. . 9. (a) Hour at which the in­ jured person' stllzttld work on the day' of accident or dangerous'· occurrence:' . (b)' Whether wages in' full or part are :.payabIE, to him fo!'· tlle d;l.y of the accidenf :01" dil.li.ge~ rous occurrerice. 10. (a) Cause or nature of accident or dangerouS occurrence. '. ~ . .,,'., . • ~~. ~ __ "-_'"<_c 206 (b) If caused by. machi­ nery- (i) Give the name of machine' and the part causing the accident or dan­ gerous occurrence. (ii) State whether it was moved by me­ chanical power at the time of acci­ dent .or dange­ rous occurrence. (c) State exactly what the injured person was doing at the time of' accident or dangerous occurrence. (d) In your opinion, was the injured. person at; . the time of accident or dangerous occurrence. . (i) acting in contra­ vention of pro­ visions of any law applicable to him; or (ii) acting' in contra­ vention of any or­ ders given by or on behalf of his em­ ployer; or (iii) acting without ins­ tructions from his employer. (e) In case reply to (d) (i), (ll) or (iii) is in the affirmative, state whe­ ther the. act was done for the purpose of and in connection with the employer's trade or bu­ siness. 11. In Case the accident or dan­ gerous occurrence took place while travelling in the em­ ployer's transport s tat e whether - . ":.' (a) the injured person was tra,velling as .a p8J!SCnger to or from his place of work. (b) the injured person was travelling with the express or im­ plied permission of his employer; (c) the transport. is being operated by oron behalf.of the employer or some other person by Whom it isprovi­ ded in .. pursuance of arrangements made with the em­ 'ployer-, and (d) the vehicle is be­ ing/notbeing ope­ rated in the or­ dinary course of public transport service. 12. In case the aCcident or dan­ gerouSi>cCurrenee tOOk place. while meeting emergency state- .13. 14. . (a) its nature; and (b) Whether the·' injured' . . person at the time of . •. accident or dangerous occurrence was em­ ployed for the ptirpose of his employer's trade or business in or about the premises at which. the ac.cident or dange­ rous· occurrence took .place. Describe briefly how the accident or dangerous currence took place. oc- Names and addresses of witnesses. 15. (a) Nature and extent of injury (e.g. fatal, loss of finger; fracture of leg, sealed, scratch fol­ lowed by sepsis, etc.) (b) Location of injury (e.g.; right leg, left hand, left eye, . etc.) . 16. (a) If the accident or dan­ gerous occurrence not fatal, ,state whether the injured' person was di­ sabled. for more than .48 hours. (b) Date and hour of re­ turn to work. 17. (a) Physician, dispensary or hospital from Whom or in which the injured perSOt)., received or is receiving treatment. (b) Name of dispensary/ /panel . doctor elected by the injured.person. 18. (a) Has the injured person .. .' died? (b) Hso, date of death .. BEllIES I No. 5 (1) (2) SED MAY, 1985 (VAISAKA ~S,,-:::19:.::0.:--"1 )~ __ ~ I certify that to the best. of my knowledge and belief the above particulars are correct in. every respeet. Signature of manager/employer N'ame, designaj;ion .. and address of mana' .. ger/employer . . Date of despatch of report (Thi8spaCeis'to beOO'mlpletedby thelnspectm'of Factories) .. ' District· ... Dare of· receipt: Number of the accident or dangerous Causation. ocCUrrence. Otherparticula:rs (e.g. fatal, leg in~ jury, arm injury, etc.). Date of investigation. Result of investigation. FORM 33 Prescribed Unde~ rule 132(3) Report of -dangerous occurrence which doe& Dot result in death or bocmy injury' 1. Name and address of factory. 2 •.. Name of occupier. 3. Name of Manager. 4. Nature of industry. 5. Brancb or department and exact place . where the dan­ gerous occurrence took place. 6. 'Date andhciur' of. dangerous occurrence. 7. Nature of dangerous. occur­ rence (State exactly what· happened).' . I certify that to the best of my knowledge and belief the above particulars are correct· in every respect. Signature of Manager: Name, designation and address, of Manager. Date cif despatch of. report .. -----~~~----------------- . (To be completed by the Inspector of Factories) ., . District- Nmnber of the dangerous'OCcur­ . rence. Date of investigation. Result of investigation. Date ofreceipt:-·. CamJation: ~ . FORM 34 P,rescl'ibed, under .rule_l?~ , Notice of poisoning or w.se8:ie (see instructions on 'reverse) 1. Name of factory ... · '. 2, Address of factory ';,. 3. Address ofofficew' ·priva~e ,. residence of occupier .... 4. Nature of Industry ... ";1" .' " - "!.' .:; ,'- 5. Name and· address 'of tile undertaking' in which '. the . patient presumes that, he' . was exposed to the' risk 'to,· . w'h i c h the poisoning . or disease is attributed ... 6. Harmfui agent or prcicess to which poisoning or disease is attributed ... 7. NaIneand'WorkNumberof "; patient ..... .. 8. Adresli of patIent ,,' 9. Sex and age of patient." ,10. Precise Occupation of the patient- . . (a:) afthe.place or last place of emploYme!'t... ::," (b) at the undertaking in which the patient pre- sumes that he 'Was ex"" . posed to 'therll;;k to . whicb poiSOning or di-, sease is attributed ... · . ,.;" U.Nature of poisoning or di- " sease from which patient.' is. suffering, ... ,. " OJ,' , •. , " "' ~ i-:-:':'" " ,-j;~ 'C il2. Apprt.~jmate date . Of be; .' . ginning and 'cessation of'''''' ',exposureofthe' patient tii'" the harmrur agent or process to. which poisoning or di:: . . .. ' 'seaseis ,.attribufudaccord"· .. ' ing to item 6 above . i: . ;1.3 •. 1 '(Has the case been re-"'Y;\) ·c, Jiorted to' the Medic3J Ins- i;:,,' .. peetor of Factories?J ",,"c' : ,-r:. ;-{. ' ,. 207 ,.-' Si15'nature of ,Factory Manager ... Date .. :' To be fille§. in by the Ohief .Inspector No. of ~ ... Remarks .... .-, ' • NOTICE OF POISONING OF DISEASE . Extract frOmtbe Factories .A<\t, i~(Se!>ttoD~); . Whel1' anrwo:r:ker in. a factory cOhtracts any dIsease ,s~ified. m the :Schedule, ,the manager of 208 the factory shall send a notice thereof to such autho­ rities, and in such form and within such time, as may be prescriJ<ed. SCHEDULE List of notifiable di~e,eetl' 1. Lead poisoning, including ,poisolting by any preparation of lead or their sequelae. 2. Lead tetra-ethyl pOisoning.' . . . 3. Phosphorous poisoning or its sequelae.·> '., 4. Mercury poisoning or ib! .fleq~elae. 5. Manganese poisoning or its sequelae. 6. Arsenic poisoning or its. sequelae; 7. Poisoning by nitrous fumes; . 8. Carbon bisulphide poisoning. . 9. Benzene poisoning, iincludingpoisoning by any. of its homologues, their nitro or amido deriva- tives or its sequelae. . 10. Chrons ulceration or its sequel~. '11. Anthrax. . .. .'.... 12. Silicosis. . 13. Poisoning by halogens or halogaliderivatives of the hydrocarbons.oj;j:he aliphatic series, 14. Pathological manifestations due to ~ . (a) radium or other radio-active. subsl:lmces; ." . ~". -. and (b) X-ray. 15. Primary epitheliematous canc.lr of skin..., 16. Toxic anaemia. . 17. Toxic jaundice due to poisonous substances. 18. Oil acne or dermatitis due to mineral oils and compounds containing mineral oii' base. 19. Byssinosis. u . 20. Asbestosis. . '.' . 21. Occupational or.contactdermati.tiscaused by direct contact with:chemiCl!l and>paints. These are of two types tha.t is,primary irritants and allergic sensitisers.. 'i .' . • . 22. Noise induced hearing loss (exposure to high noise levels). ,>. ' , . ,:; EXtract from theGoa,Da.mau and··DiU. Factories RnIes, 1982 (Rule 133) ;. . _" i.';.~) . _', '.. ~ . A notice in Form 34 should be .sent forthwith both to the Chief Inspector'andto the Certifying Surgeon, by the manager of a .fac1;oryin which there occurs a case of lead, phosphorous,: mercury, .manganese, arsenic, carbon bisulpW,<w,or benzene poisoning; or of poisoning by nitrous fumes "or by halogens or halogen derivatives of the hydrocarbons of aliphatic series; or of chrome ulceration,anthrax; silicosiS, . toxic anaemia, toxic .jaundice,· primary. epitheliema­ tous cancer of skin or of pathological manifesta­ tions due to radium or other radio-active substances or X-ray~" . - ,.~,.~.; -, ." FORM aG. Prescribed under rule 135 Abiltraet oftl!6'Fa<ltOries Act, 1948 and _ Goa, Daman. and Diu _ries Rules, 1984 (To, be disp~ay~d in a conspicuous and convenient place at or near the main entrance to the factory) . '.; .' . 1,~f,erpr~tCf~ion.,. ' 1. "Factory;;'inearu; any premise~ including thl". pre­ cincts·. thertlof~' ,OJ .".."..... ..•. " .• .' Ohw.hereonteh ;01' ~?re worker~are. wo¥k1Ag, ··.on :ap.Yi;dayof the:precedlng·twelve nionths, and' iii SERIES I No.5 any part of w4ic4m~uJ;acturirig pr()C!lss. is Qeing carried on with the aid of power, oris ordinarily so carried on, or (ij) Whertlon' twenty or more workers are work­ ing, or were working on any day of the preceding twelve months, and ~a:liY part of which a manu­ facturing process isbiiiiIg earned on without the aid of power, or is ordinarily so .carried on. but does not incllide a miIl:e s'ubje~t to the operation of the Mines Act, 1952 (35 'of 1952), or a mobile unit belonging to the armed forces of· the Union, a railway running shed !>~apotel, restatu:al1~ or eating place." .... ' .. '. ..... .' .. Explanation: For computing the,number of work­ ers for the purposes of this clause all the workers in different relays in a day shall be taken into account. 2. "Worker-' means a person employed, directly or through any agency, (including a contractor) with or without the knowledge of the principal employer, whether for remuneration or not; in 'any manufac­ turing process, or in cleaning any part of the machi­ nery or premises used for manufacturing process, or in any other kind of work incidimtillto, or connected with, the manufacturing process, or the subject of the manufacturing process;· but does not include . any member of the armed forces 9f the Union. 3. "Matnu'facturing vroc~'mea1l8 UJnyprDCe88 for: (i) making', a1teririg, repairing, ornamenting, finishing, packing,. oiling, washing, cleaning, breaking up, demolishirig, or otherwise treating or adapting any article or substance with a ·view to its use, sale, transport, delivery.9rdisposa,l or (ii) Pumping oil, water, sew~.Q!: any other substances; or' ... . (iii) generating;" transforming or' transmitting power; or .... . '.' (iv);compdsing types of printing,printing by letter press, lithography, 'photogravure or other similar process or book-binding; or . ' (v) constructing; recqnstruC1:ing; repairing; refitting, finishing" or breaking' up. ships, or vessels; .and . . ,. > (vi) prei!ervingor storing any article in COld storage. . .... . Working hours, holid~s,. intervals after rest, etc. 4. Hours of work jor adults (Sections 51 anil54).­ No adult worker shall be required or allowed to work in a factory fpr more than 48.hours in any week and for more-than 9 hours in any day. 5. l~elaa:(1,tion of hours of wCYi'k fOr adults (SeCtion 64)· - The ordinary limits on working hours of adults may be relaxed in certain special eases, e. g., workers engaged onqrg<)nt repairs; in-:wQrk in the nature or,preparatory or complementary work which must necessarily be earried on outside the limits laid down for the general working of the'factory: in work which is necessarily so)ntermi~t.that .. the intervals during. which they do not woIit. while on duty ordinarily amount to more than1theintervals for rest; in any work which for technical;reasons must be carried on continuously; in.making or sup- SED MAY, 1985 (VAISAKA 13, -=1-=--90:...:7~) ___ _ plying articles of prime necessity which must be made or supplied every day; in a manufacturing pro" cess which cannot be carried on except during seasons, or at times dependent on the irregular action of natural forces; in engine rooms or boiler houses or in. attending'to power plant or transmission ma­ chinery; in the' printing of newspapers, who are held up on account of the breakdown of machinery; in the loading or unloading of railway wagons or lorries or trucks; and in any work which is notified by the state Government in the Official Gazette as a work of National importance. Except in the case of urgent repairs, the relaxa­ tion shall not exceed the following limits of work inclusive of overtime:-, '(i) the total uumber of hours of work in any day shall not exceed ten; (ii) the spreadover inclusive of intervals, for rest, 'shall not exceed 12 hours in anyone day; (iii) the total number of hours of work in a week, including overtime, shall not exceed sixty; (iv) the total number of hours of hours of over­ time work shall not exceed fifty for anyone quarter. . 6. Payment for overtime (section 59). -Where a worker works in a factory for more than 9 hours in any day or for more than 48 hours in any week, he shall,in respect of overtime work, be entitled to wages at the. rate of twice his' .ordinary rate of wages. 7. Exemption. of 8upervisory 8taff (8ection 64).­ Chapter VI, other than the provisions of clause (b) of sub-section .(1) of section 66 and of the proviso to . that sub-section, of the Act-working' hours of adults - does not apply to persons holding positions of supervision or management or are employed in a confidential position in a factory, provided that where the. ordinary rate of wages of such person does not exceed rupees seven hundred and fifty per month, they are entitled to extra wages in respect of overtime work under section 59. 8. Weekly holiday (adult8) (8ection 52).-No adult worker shall be required or·allowed to work in a factory on the first day of the week, unless- (a) he'has, or will have, a holiday for a whole day on one of the three days immediately before or after the said day, and . . (b) the manager of the factory, has, before the said day or the substituted day under clause (a) whichever is earlier,- (i) delivered a notice at the office of the Inspector of his intention to require the worker to work on the said day and of the day which is to' be substituted; and (ii)displayed a notice to that effect in the factory; Provied that. no substitution shall be made which will result in any worker wQrking for more than ten days consecutively without a holiday for a whole day; , 209 9.' Compensatory holidays (section 53). - Where a worker in a factory as a result of exemption from the ordinary provision relating to weekly holidays, is deprived of ,any .of the weeldy holidays, he shall be allowed, within the month in which the holidays were due to him or within the two months imme­ diately following that month, compensatory holiday of equal number of,theholidays so lost. 10. Intervals for rest for adUit8 (section 55 and 56).-The periods of work of "adult workers in a factory each day shall be so fixed that no period shall exceed 5 hours and that no worker shall work from more thaIi5 hours before he. has had an in­ terval for rest of at least half an hour and that in­ clusive of his intervals for rest they shall not spread .over more than ten ang a half !lours in.atiy dayor, , with the permission of the' Chief Inspector ,in writ­ ing, 12 hours. 11. Prohibition o/aoubleemplRYment (8t1ctions60, 71 and 99). - No child or, 'except in certain circums­ t8JJ.ces lin 'adult worker,shall be required or ailowed to work in any factory 'on any day;'on'which he has already been working, in any otjierfactOry. If a child works in a factory on any day on which he has. already been working in another factory,'the parent'orguardian.,of·the child or the person having custody of or controlov'er him or obtaining any direct benefit from his wages, shall be punishable with fine, Which may extend to Rs. 50/- unless it appears to the court that the child; so worked without the consent or ,connivancedf such· parent, guardian or person. . 12. Prohibition dfemployment,ofchildren under 14 (section 67). -No 'child who has not completed his fourteenth yea,rshallbe rEiquired or allowed to work in any factory. ' ," , . 13. Hour8 of work for ohildren (8ection 71). - No child shall be employed or'permitted to work in any factory for more than four and a half hours in any day and during the period of at least twelveconse­ cutive hours which shall include the interval bet­ ween 10'p.m. and 6 a.m. The periods of work of all children employed in a factory shall be limited to two shifts which . Shall not overl!J.p or spread over more, than 5 '!lOurs each and each child shall be em­ :pl.oyed in only one of the relays. ,' .. ThE!' provisions' reIll.ting to weekly holidaysshaU also apply to· child workers8,ndnQ;',exemption from this provision may be granted in,;respect of any child. ' , 14. Prohibition of employment o/women (section 66). -'- No woman shall be required qr allowed to work in any factory except between.' the hours of 6a. ttl, and7 p)m. The state Govei-nriient may vary these limits or exempt this restrictibn m case of women wqrking in fish-curing or fish'canning fac­ tories. . ·~ye with wages 15. Leave with wage8 (sections 79,80 and 83 and rules). - Every worker who has worked for a period of 240 days or more' in a factory during a calendar year shallbe' allowed during the subsequent calendar 210 year leave with wages for a number of days calcu­ lated at the rate of- (i) If an adult, one day for every twenty days of work performed by him during the previous calendar year; and (ii) If a child, one day for every 15 days of work performed by him during the previous calendar year. Explanation: For the purpose of this sub-sec­ tion --'- (a) any days' of layoff, by agreement or con­ tract or as permissible under the standing orders; (b) in the caSe of female worker, maternity leave for any number of days not exceeding twelve weeks; and (c) the leave. earned in the year prior to that in which the leave is enjoyed; shall be deemed to be days on which the worker has worked in a factory for the purpose of computation of the period of 240 days or more, but he shall not earn leave for these days. Explanation 2: The leave. admissible under this sub-section shall be exclusive' of all holidays whether occurring during or at either end 'of the period of leave. For the leave allowed to him, a worker shall be paidata rate equal to the daily average of his total full-time earnings, for the days on which he actually worked during the month immediately preceding the leave ,exclusive of any overtime and bonus, but exclusive of dearness allowance and the. cash equiva­ lent of the advantage occurring through the ron-· cessional sale to the worker of food grains and other articles. A worker whose service commence on a day other than on the first day of January shall be entitled to leave with wages at the rate indicated above, if he has worked for two-thirds of the total number of days in the remainder of the calendar year. If a worker is discharged or dismissed from service or quits his employment or is superannuated or dies while in service, during the course of the calendar year, he or his heir or' nominees as the' case maybe, shall be entitled to wages in lieu of the quantum of leave to which he was entitled imme­ diately before his discharge, dismissal, quitting .of employment, superannuation or death, calculated at the rates specified above, even if he had not worked for the entire period specified above. Such payment shall be made: . . . (i) Whether the worker is discharged or dis­ missed or quits. employment, i:lefore the expiry o~ the second wqrking day from the day of .such dIscharge, dismissal or quitting; and (ii) where the worker is superannuated or dies while in service,. before the expiry of two months from the date of such superannuation or death. If the ernploymentof a worker who is entitled to leave with wages is terminated by the occupier before he has. taken the entire leave to which he is SERIES I No. 5 entitled, or if having applied for and having not been granted such leave,. the worker quits his em­ ployment before he has taken the leave, the occupier of the factory shall pay him the amount payable in respect of the leave not taken, and such payment shall be made before the expiry of the second work­ ing day after the day on which his employment is terminated and a worker, who quits his employment on or before the next pay day. The manager shall maintain a register of leave with wages in the prescribed Form 21 and shall provide each worker with a book called the 'Leave Book' in the prescribed Form 22: The leave book shall be the property of the worker and the manager or his agent shall not demand it except to make entries of the dates of holidays or interruptions in service, and shall not keep it for more than a week at a time. If a worker loses his leave book, the manager shall provide him with another copy on payment of paise 25 and shall complete it from his record. . Health 16. Cleanline8 (8ection 11): Except in cases spe­ cially exempted, all inside walls and partitions, all ceilings or tops of rooms and all walls, sides and tops of passages and staircases in a factory shall be kept whitewashed or colourwashed. The white­ washing or colourwashing shall be carried out at least once in every period of fourteen months. The floor of every workroom shall be cleaned at least once in eyery wee; '.by washing,using disinfectant, where necessary, or by some other effective method. 17. Diflpo8al otWa8te8 and etfluent8 (8ection 12): Effective arrangements shall be made in every factory for the treatment of wastes and effluents due to the manufacturing process cllrried on therein, so as to render them innocuous, and for their disposal. 18. Ventilation and temperature (8ection 13): Effective and suitable proviSion shall be made in every factory for securing and maintaining in every workroom adequate ventilation' by the circulation of fresh air and such a, temperature as will secure to . the workers therein reasonable conditions of comfort and prevent injury to health. 19. Overcrowding (8ection 16): Unless exemption has been. granted there shall be in every workroom of a factory in existance on the date of commence­ ment of this Act at least 9.75 cubic metres and of a factory built after the commencement of this Act at least 13.92 cubic metres of space for every worker employed therein, and for this purpose no account . shall be taken of any space which is more than 4.25 metres above the level of the floor of the room. 20. Lighting (8ection 17): In every part of a fac­ tory where workers are working or· passing, there shall be provided and. maintained. sufficient and suitable lighting, natural or artificial,' or both. 21. Drinking water (8ection 18 and rule8): In every factory effective arrangements shall be made to. provide and maintain at suitable. points conve­ niently. ~ituated for all workers employed therein, a suffICIent supply of wholesome drinking water. 3RD MAY, 1985 (V AISAKA 13, 1907) In every factory wherein more than 250 workers are ordinarily employed the drinking water shall, during hot weather, be cooled by ice or other effec­ tive methods. The cooled drinking water shall be supplied in every canteen, lunchroom and restroom and also at conveniently accessible points throughout the factory. 22. Latrines wnd urinals (section 19 and ru.Jes): In every factory sufficient latrine and urinal accommo­ dation of the prescribed types (separate enclosed accommodation for male and female workers) shall be provided conveniently situated and accessible to workers, at all times while they are at the factory. Every latrine shall be under cover and so partitioned off as to secure privacy and shall have a proper door and fastenings. Sweepers 'shall be employed whose primary duty it would be, to keep clean la­ trines, urinals, and washing places. 23. Spittoons (section 20 J: In every factory, there shall be provided a sufficient number of spittoons of the type pres~ribed in convenient places and they shall be maintained in a clean and hygienic condi­ tion. No person shall spit within the premises of, a factory except in the spittoons provided for the, purpose. Whoever spits in contravention of this pro­ vision shall be punishable With fine not exceeding , five rupees. Safe~ 24. Fencing of , machinery (section 21): ID. every factory dangerous parts of machinery e. g., 'every moving part of a prime mover and every flywheel connected to a prime mover, etc. etc. shall be securely fenced by safeguards of substantia] construction which shall be constantly maintained and kept in pOSition While the parts of machinery they are fen- cing are in motion or in use. ' 25. Work on or near machinery in motion (section 22): No woman or young person shall be allowed in any factory to clean, lubricate or adjust any part of a prime mover or any transmission machtnery while the prime mover or the transmission machi­ nery is in motion or to clean, lubricate or adjust any part of any machine if the cleaning, lubrication or adjustment thereof would expose the woman or young person to risk of injury from any moving part either of that machine or of any adjacent machinery. , 26. Employment of young persons on dangerous machines (section 23): No young person shall work at any machine declared to be dangerous unless he has been fully instructed as to the dangers arising in connection with the machine and the precautions to be observed and has received sufficient training in work at the machine or is under adequate super­ vision by a person who has, a thorough knowledge and experience of the machine. 27. Casing of new machinery (section 26): In all machinery driven 'by power and installed in any factory after the commencement of this Act, every set screw, bolt or' key on any revolving shaft, spindle, wheel or pinion shall be so sunk, encased or otherwise effectively guarded as to prevent danger; all spur,worm and other toothed or friction gearing which does not require frequent adjilstment 211 while in motion shall be completely encased, unless it is so situated as to be as safe as it would be if it were completely encased. ' Whoever sells or lets on hire or, as agent of a seller or hirer, causes or procures to be sold or let on hire, for use'in a factory any machinery driven by power which does not comply with these provi­ sions or any rules made under this section, shall be punishable with imprisonment for a term which may extend to three months or With fine which may extend to five hundred rupees or With both. 28. Prohibition of employment' of women and children near cotton Openers (section 27): No women or child shall be employed in any part of a factory for pressing cotton in which a cotton opener is at work. 29. Excessive weights (section 34 and rules): No woman, or young person shall, ,unaided by another person, lift, carry, or move by hand or on head, any material, article, tool or appliance exceeding the maximum limit in weight set, out in the f()llowing Schedule: - SCHEDULE Persons Maximum Weight of material, article tool or appliance , (a) Adult male (b) Adult female (c) Adolescent male (d) Adolescent female (e) Male child (f) Female child 55 kilograms 30 kilograms 3!),kilograms 20 kilograms 16 kilogramS 14 kilograms' 30. Protection of eyes (section 35 and rules): ,Effective screens or suitable goggles shall be pro­ vided' for the protection of person~ employed in or in the inunediate vicinity of processes which involve risk ,of injury to eyes from particles or fragments thrown off in the course of the processes or which involve risk of injury to eyes by reason of exposure to excessive light oriufra-red or ultra-violet radia­ tions. 31. Precautions in case of fire (section, 38 and rules): Every factory shall be provided with ade­ quate means of esca.pe in case of fire for the persons employed therein. The doo,rs affording exit from any room shall, unless they are of the sliding type, be constructed to open outwards: Every window, door or other exit affording a means, of escape in case of fire, other than the means of exit in ordinary use, shall be, distinctively marked. Effective and , clearly audible means of giving warning in case of 'fire to every person employed in the factory shall be provid~d. Effective measures shall be taken to ensure that wherein more than twenty workers are ordinarily employed in any place above the ground floor, or wherein exPlosive or highly inflammable materials are used or stored, all the workers are familiar with the means of escape in case of fire and have been adequately trained in the routine to be followed in such case. Welfare 32. Washing facilities (section 42 and rules): In every factory adequate and suitable facilities for 212 washing shall be provided and maintained for the )lse of the workers therein. Such facilities shall in­ cJude soap and nail brushes or other suitable means of cleaning and the facilities shall be conveniently .accessibleand shall be kept in a clean and orderly . condition. If female workers are employed separate washing facilities shall be provided and so enclosed or screened that the interiors are not visible from any place where persons of the other ·sex work or .pass. 33. Facilities for storing and drying clothing (section 43 and rules): In the case of certain dan­ gerous operations e. g., lead processes, liming and tenning of raw hides and skins etc. suitable places for keeping clothing not worn dtiring working hours and for the drying of wet clothing shall be provided and maintained. 34. Facilities/or sitting (section 44): In every fac­ tory suitable arrangements for sitting shall be pro­ vided and maintained for all workers obliged to work in a standing position in order that they may take advantage of any opportunities forrest which may occur in the course of their work. 35, First-aid and ambulance room (section 45): IiI every factory there shall be provided and main­ tained so as to be readily accessible during all work­ ing hours first-aid boxes or cupboards equipped with the prescribed contents. Each first-aid box or cupboard shall be kept in the charge of a separate . responsible person who holds a certificate in first-aid treatment recognised by the State Government who shall always be available during the working hours of the factory: In every factory wherein more than 500 workers are ordinarily employed there shall be provided and maintained an ambulance room of .the prescribed size, contained the prescribed equipment, and in the charge of such medical and nursing staff as may be prescribed and those facilities shall always be made readily available during the working hours of the factory. 36. Canteens (section 46 and rules): In specified factories wherein more than 250 workers are ordi­ narily employed, a canteen or' canteens shall be pro­ vided and maintained by the occupier for the use of the workers. Food, drink and other items served in the canteen shall be sold on' a'non-profit basis and the prices charged shall be subject to the approval of a canteen Managing Committee which shall be appointed. by the manager and shall consist of an equal' ninnber of persons nominated by the occupier and elected by the workers. The number of elected ~orkers shall be in the porportionof 1 for every 1,000 workers employed in the factory, provided that in no case shall theril be more than 5 or less than 2 workers on .the eolllinittee. The Committee shall be consulted from time to time as to the quality and quantity of foodstuffs to be served in the canteen, the arrangement of the menus,. etc. etc. Where the canteen is managed by co-operative society, it is not necessary to appoint a canteen Managing Committee and the prices to be charged may include a margin of profit upto a maximum of 5 per cent of its work- ing capital. ." . . . ' , SERIES I No.5 37. Shelters, restrooms and lunchroms (section 47): In every factory wherein more than 150 work­ ers are ordinarily employed, adequate and a suitable lunchroom, with provision for drinking water, where workers can eat meals brought by them, shall be pro­ vided and maintained for the· use of the workers . , . 38. Creches (section 48 and rules): In every factory wherein more than 30 women workers are ordinarily . employed there shall be provided and maintained a suitable room or. rooms for the use of children under the age of six years of such women. The creche shall be adequately furnished and equipped and in particular there shall be one suitable cot or a cradle with the necessary bedding for each child, atleast one chair or eq)livalent seating accom­ modation for the use of each mother while she is feeding or attending to her child,'imda sufficient supply of suitable toys for older children. There shall be in or adjoining the creche a suitable washroom. for the washing of the children and their Clothing. An adequate supply of clean clothes, soap and clean towels .shall h.e made. available for each child while it is in the creche. At least a quarter litre of clean pure milk shall be available for each child on every day it is accommodated in the creche and the mother of such a child shall be allowed in the course of her daily work suitable intervals to feed the child. For children above two years of age, there shall be provided, in addition, an adequate supply of wholesome refreshment. A suitably fenced and shady open air playground shall also be provided for the older children. . 39. Welfare Officers (section 49): In every factory wherein 500 or more. workers are ordinarily em­ ployed the o.ccupier shall employ in the.factory such number of Welfare Officers as may be. Special Provisions 40. Dangerous operations (section 87'and rules): Employment of women adolescents and children is prohibited or restricted. in certain operation~ de­ clared to be dangerous, e. g., electroplating, manu­ facture and repair of electric accumulators, glass manufacture, grinding or glazing of metals, manu­ facture and treatment of lead and certain compounds of lead, sandblasting, etc. ' . 41, Notice of accidents (8ection 88 and rules): When an accident occurs which results .in the death of any person or which results in such bodily injury to any person as is likely to cause his death, or any dangerous occurrence specified in the Schedule annexed hereto takes place in a factory, the manager of the factory shall forthwith send a notice thereof by telephone, special messenger or telegram to the Inspector and the Chief Inspector. When any acci­ dent or any dangerous occurrence specified in the Schedule anilexed hereto, which results in the death of any person or which results in such bodily injury to any person as is likely to cause his death, takes place in a factory, forthwith notice shall be sent also to the District Magistrate or ·Sub-divisional Officer to the officer-in~charge of the nearest police station; and to the r.elatives of the injured or deceased person .. SCHEDULE 1. Bursting of a plant used for containing or supply­ ing steam under pressure' greater than' atmos- pheriC pressure. . t , . ''j'~' )\, ' BRD MAY, 1985 (V A~SA15~1~!,~07L __ ______ _ 2. Collapse or failure of a crane, .derrick, winch, hoist or other appliances used in raising or lower­ ing persons or goods, or any. part thereof, or the overturning of a crane. 3. Explosion, fire bursting out, leakage or escape of any molten metal, or hot liquor or gas causing bodily injury to any person or damage .to any room or place in which persons are employed, or fire in rooms of cotton pres.sing factories when a cotton opener is in use. 4; Explosion of a receiver or container used for the storage at a pressure greater than atmospheric pressure of any gas or gases (including air) or solid resulting from the compression of gas. 5. " Collapse or subsidence of any floor, gallery, roof, bridge, tunnel, chimney,wall, building or any other structure.' "'. ,42. Notice of certain diseases (section 89 and ncles): Where any worker in a factory contracts any of the following diseases, the manager of the factory shall send notice in Form 34 thereof forth­ with both to the Chillf Inspector and the Certifying Surgeon: ' Lead, phosphorous, mercury, manganese, arsenic, carbon bisulphide or benzene poisoning; or poisoning by nitrous fumes or by halogens or halogen deriva­ tives of the hydrocarbons of the aliphatic ·series; or of chrome ulceration; anthtax,silicosis; toxic anae­ mia, toxic jaundice, primary epitheliomatous cancer of the skin, or pathological manifestations due to ra­ dium or other radio-active sUbstances or x-rays. 43. No charge for facilities and convenience (sec­ tion 114): No fee or charge shall be realised from any worker in respect of any arrangements or faci­ lities to be provided, or any equipments or applian­ cies to be supplied' by the occupier under the pro- visions of this Act. . 44. Powers of Inspectors (sectiOns 9 and 82): Ins­ [lectors have powers to inspect factories any time and may require the production 'of registers, certi­ ficates, etc. prescribed under the Act and the rules. Any Inspector may institute proceedings on behalf of any workers to recover any sum required to be paid by an employer under the provisions ralating to leave with wages, which the employer has not paid. . 45,' Obligations of workers (section 97 and 111): No worker in a factory - . (i)' shall wilfully interfere with or misuse any appliance, convenience or .other thing provided in a factory for. the purposes of securing the health ' safety or welfare of the workers therein' ' . .. , (ii) shall wilfully and without !lony reasonable cause do anything likely to endanger himself or others; and . (ii.i) shall wilfully neglect to make use of any applIance or other thing. provided. in' the factory for the purpose of secunng the health or safety of the workers therein. . " .... If any worker employed in a factory contravenes any of these provisions or any rule or order~inade 213 thereunder he shall be 'punishable with imprison­ ment for a term which may extend to three months or with fine which may extend to Rs. 100/- or with both. If any worker employed in a factory contravenes any provision of this Act or any rules or o.rders . made thereunder, imposing any Quty or liability on workers, he shall be punishable witnfine which may extend to Rs. 20. . 46. Certificates of fitness (sections 69, 70 and 98): No child who has completed 'his fonrt!,enth year or an adolescent shall be required or allowed to work in any factory, unless a certificate ilffitnessgranted with reference to him is in the <nlStody of the' mana­ ger of the factory and such child or aoolescent carries, while he is at work, .a token giving a refe­ rence to such certificate; Any fee payable for such a certificate shall be paid by the occupier and shall not be recoverable 'from the young person, his parents or guardian. An adolescent who has been granted a certificate of fitness to work in a factory as an adult .. and who while at work in a factory carries a token giving reference to the certificate shall be deemed to be a adult. for all the purposes of the pro~isions of the Act relating· to the working hours of adults' and the employment of Act relating to the working hours of adults and the employment of young persons. An adolescent who has not been grante4 a c.ettificate of fitness to work in a factory as an adult shall, not­ withstanding his age, be deemed til be a child for all the purposes of,this Act .. Whoever knowingly uses or attempts. to use, as a certificate of fitness granted t()'hilnself, ,a certi­ ficate grarited to another adolescent to work in a factory as an adult, or who ha;';ng produced such a certificate knowingly allows i,t to be used, or an attempt to use to be, made, by another ·person, shall be punishable with imprisonment for a term which may extend to one month or with, fine Which may extend to Rs. 50/- or with botli(;;· . 47. Registers, notices ana ~ur';;(Sl!ctions 61, 62, 63,72,73,74 and 110 and rules): Areg;ster of adult workers in j;heprescribedForml9 and a register of child workers in the.prescribed--FOrriJ. 21 shall be maintained by the manager of ~~ry factory. A notic.e of periods of work for adults and.notice . of periods of work for ,children )n the prescribed Fonus 18 and 20 shall be correetlY:.inaintamed and displayed in every factory. No. adUlt worker or child shaH b~i'equire~ or allowed to Work in ,any factory otherwise than III accordance with -their respe'ctfve notices of periods of work displayed' in tile' factory. The owners, occupiers or mahaiet~ of. fa~tories shall submit the prescribed periodical returns to the Inspector regularly. 214 FORM 36 Pre~l'j.l)e~ un~er rQle 136(a) J\DJl\l!!! RetljnJ. For the year ending 31st December, 19 ... 1. R.egi,stration n u m b e r of factory' '.' 2. N aIjle of factory 3 .. Name of occupier 4. Name of manager 5. Full postal add res s of factory 6. Nature of industry Number ~f ~qfJter,$ ~d_ .particub;t.rs of e.mp~oyme.t 7 .1\.veragfl nmnber of workers . elJl.Ploye<i dWY (Ilea expla· natory note) - (a) 1\.<iults.,.--- . (i) Miln Oi) Women (b) Adolescents­ (i) Male (ii) Female (e) Children- (i) Male (ii) Female 8. Normal hours worked per wee k . (see explanatory. noteh ." (a)Man: (b) Women: (c) Children: 9. Number of days worke<l. in the year 10. Total number of manhours worke<l. . including overtime: (a) Men: (b) Women: (cr Children: 11. (a) Does the factory carry out any operation de. clared dangerous under section 817 (See rule : .. (b) If so state the types of operation (quote sche· dule no.) . (e) . State average d ail y . . number'of w()fkers em· ployed in SUch dange· rous operation (s) (if m()re than One such . operation is ll)volved, . 'giye details separately fo~ each operation) . ~ve with wagef 12.T()talmmJ~r· of workers emploYlld <iuring the year: (a) Men: ." (b)Women:.'· (c) Children:: 13. Number of' workers who .' were .. entItled·to ann u a 1 . leave 'with wages during the year- (a) Men: • (b) Women:. (c) Children: lA. Nmnoor of workers who were granted leave during the year- (a) Men: :(b)Womell: · (e) ciiild~n: SERIES fNo. 5 NU!D:ber of dischar~ed or ,4l$mj..ue~ workers., 15. (a) .!'fmnber of workers <Us. charged . or dismissed from the service or wbose. service!! .w ere tel;'l)linated during .the y~l).r . (b) Nmnbl'r of lIuch WQrk· era paiQ. wagell in lieu of leave and the total amount of wages paid in lieu of leave Compensatory ~olidaY$ ;W. Nmnlmr ()f wor!<er$ exemp· · ted fr<>msection 52 of the FaciQries 1\.ot- Men: Women: 17. Number of workers who received holidays in the­ .•. (a) Saine month (b) Fo!1()wing mOnth (c) Third month 18. Nllmber of canteens provi· ding~' . (a) Cooked food an<l. fElfre.shmel).ts (b) cooked food only (c) refrel3hments .. and tea . only. (d) tea only 19. In . the . canteen run and managed departmentally or through a.contractor . 20. Please state if a common C!I;lltOOn is being charged wIth some' other factory 21. Approximately ;average number of workers using daily 22. Item of expenditure borne by the ocellpier Iltating se, par4tely the total expendi· ture borne by the oCcupier . in subsidizing sale of food. ·stuff or in otherwise sell· ing food·stuff below cost price , t • J SRI) MAY, 1985 (VAISAKA 13, 1907~)~ _____________________ 21_5 _trooms or ohelters .... 01 ~ 23. (a) Number 'Of restrooms or shelters pr'Ovided (b) Number 'Of lunchrooms pr'Ovided (c) Approximate average d a il y attendance of workers at the shelter, restroom· 'Or lunchro'Om Creches 24. Number 'Of creches pr'Ovided 25. Appr'Oximate average daily attendance 'Of' children at the creche- (a) 2 years' and below (b) ab'Ove 2 years 26. Details 'Of facilities pr'Ovided with regard to- (a) Milk (b) Food (c) Cl'Othes (d) T'Oys (e) Medical Aid (f) Others 27. Details 'Of staff empl'Oyed­ (i) Doct'Or- (a) :Males . (b) Females (il) Nurses (iii) TeaChers (tv) Ayahs (y) Sweepers 28. Ntiihber 'Of Welfare Offi­ cers appointed 29. Accidents and Safety Officers . (a) T'Otal number 'Of acci­ dents. (see explanatory n'Ote) (i) Fatal (il) N'On-fatal (b) Accidents in which w'Orkers returned to 'work during the year t'O which this return relates. (i) Accidents (persons injured) occurring during the year'in which injured w'Or­ kers . returned to work during the saine year (aa) Number of accidents (bb) Men-days lost due to accidents (il) Accidents (persons injured) ooclllTing • in the previ'Ous year in which in­ jured worl<crs re­ turned t'OW '0 rk during- the year to whiCh this retuftl rela.tes (aa). Number 'Of . accidents (bb) Mim-days lost· due t'O accideI!ts (c) Accidents 'ill which workers did not retutih. to work during ~e y~ to which this' return relates (i) No. 'Of accidE:nts (ii) Man-days lost dll-e to accidents (d) Number of Safety Offi- . cers appointed Suggeetion Scheme 30. (a) IS a suggesti'On scheme in operati'On in fact'OrY? (b) If so, the number of. suggesti'Ons - . (n received during the . year (ii) accepted during the year (c) Am'Ount awarded in cash prizes during the year (i) Total am'Ount awarded (ii) value of the maxi­ mum cash prize awarded (iii) value of thE: mini­ mum cash prize awarded. Certified that the inf'Ormati'On furnished above is to tbebest of my kn'Owledge and belief, correct. Sigllatureof '~anager . Date: Explanatotyrwtes: 1. The average daily number should be calculated by dividing the aggregate number of attendance of working days by the number ofw'Orking days .in the year. In reck'Oning attendances, attendances by temporary as well as permanent 'employees ·should be counted, and all employees should be included, whether they are empl'Oyed directly or under c'On­ tractors. Attendances onsepatate shifts (e. g. night' and day shifts) should be counted separately. Days on which the fact'Ory was closed forwhatevet cause, and days on which the 'manufacturing processes were . not ()alTled on sh'Ould not be treated as worlting days. Partial attendance fot le8!I than half a Shif'ton Ii 216 working day should be ignored, while attendance for half" a shift or more.onsuch day should be treated as full attendance. 2. For seasonal factories, i;pe average number of .workers employed during the working season and the off-season should be given separately. Similarly the number of days worked during tpe working and off-season should be given separately. 3. Normal hours work'ed per\veek fueans the actual hours worked excluding rest intervals . . '; .. FORM 37 PresCrl~ed.~nder. rule ~36(D): . For the half-year ending 30th June 19 ... . 1. Registration nuinber : of fac-> tory : .. 2. Name of factory 3. Name of occupier'; .. ' 4. Name of Manag"r: : ... 5. Postal address of factory 6. Nature of industry: .', 7. Average number of workers employeq daily (seeexplana~, tory note) . (a) Adults (i) Men (ii) Women (b) Adolescents (i) Male :- ~'.-; (ii) Female' SERIES I No.5 4. Every:person killed or injured should be treated as one separate accident. If in ,one occurrence six persons were injured or killed, it should be counted as six accidents. 5. In item 23(a), the number .of .accidentswhich took place during ~b,e yearsb,01.lld'be given. Only those accidents which, prevented:. workmen from working for 48 hours 'or more, or: which were fatal should be included. (c) Children (i) Male (ii) Female 8. Number of days worked during' (:', the half-year ending 30th "June , ",' 19 ... . Explanatory note: SignatUte6f Manager Date The average daily number shi:iui.{'beqalcUIated by dividing the aggregate number of:~attimdances on working days by the .number .of working d!LYs ,during the half-year. In reckoriinglitteildarices, attendances by temporary as well as permarieIit'imiployees should be counted and all empl.\l,¥,ees. should be included, whether they are. emplo;iTed directly or under contractors. Attendances <iii' "sbparate shifts (e. g., night and day shifts) should:be counted Separately. Days on which the fa~~<l:ry was closed, for whatever cause, and days on Which, the manu­ facturing processes were not carried .oli'i;hould not , be treated as working days. Partilifiitteria:a:n'ce for less than half a shift on a"Working, day should be ignored, while atteildancie for'a.'ha.lf;~ shift 'of more on such day should be treated as iiili'a.'ttimdance . . -, '.' FORM 38 Name of factory .... Place Father's name . '" ". . ~escribed under rule 140 District ... ., NatUre of work Muster Roll if I II II I II I : I! . ":1 . '.J II! I: I I : I ' 111111111111 I . ',') \ SED MAY, 1985 (V AISAKA 13, 1907) 217 - FORM 3D [Prescribed under rules 136(d) and 141] Register of accident. and dangerous OCC1l.l'n)nees FORM 40 (See rule 142) Inspection· book containing heading as under:- Nameo! injured person (i! any) 1 Date. of accident , or ! dangerous! occurrence! 2 Date ot report (in form 32 or 33) to Ins­ pector 3 ----·----~I i rous,occur· person renee to work \ Number IOf days of , injured r person !" a~:t from worl, Nature of II Dato ot accident , return of or dange~:1 injured ; i ""-~'--·~-I-----~-·- 1 I 5 ! 6 ----~i'---'------: page -Covering page Back of the covering page Every _numbered page Back of every num­ bered page FORM 41 Prescribed under sub-rule -(4) of rule 89 ReOOtd of Eye Examination Heading Inspection Book for Ins­ pectors of Factories and _ CertifyingSnrgeon only. Manager's remarks re­ garding action taken, if any. Inspector's or Certifying Surgeon's remarks. Manager's remarks re­ garding action taken, if any. By order and in the name of the Lieutenant Governor of Goa, Daman and Diu. Subhash V. Elekar, Under Secretary (Industries and Labour). Panaji, 1st April, 1985. GOVT.- PRINTING PRESS~GOA (Imprensa Naeional- Goa.) PRlCE~Rs.17-25 Ps. _0130214359_001.tif _0130214525_001.tif _0130214629_001.tif _0130214844_001.tif _0130215030_001.tif _0130215305_001.tif _0130215507_001.tif _0130215721_001.tif _0130215919_001.tif _0130220142_001.tif _0130220314_001.tif _0130220544_001.tif _0130220735_001.tif _0130220939_001.tif _0130221201_001.tif _0130221431_001.tif _0130221653_001.tif

All of Insurance Act, 1948