Rule 3, MP stamp rule 1942: Description of stamps
MP stamp rule 1942 - Rule 3
Text of rule 3
Description of stamps
3. Description of stamps. – (1) Except as otherwise provided by the Act or by these rules -
(a) all duties with which any instrument is chargeable shall be paid and such payment shall
be indicated on such instrument by means of stamps issued by the Government, bearing the
words, "Madhya Pradesh" in Hindi vernacular for the purpose of the Act; and
(b) stamp which by any word or words on the face of it is appropriated to any particular kind
of instrument shall not be used for any instrument of any other kind.
Explanation : Stamps bearing the words "Madhya Pradesh" shall be deemed to have been
issued by the Government.
(2) There shall be three kinds of stamps for indicating the payment of duty with which
instruments are chargeable, namely:-
(a) Impressed Stamps : These stamps shall be overprinted with the words "Madhya
Pradesh" and bearing serial number, impressed stamp denotes labels affixed and impressed by
the proper officer, stamps embossed or engraved on stamp paper, and also impression by a
franking machine or any other machine as the State Government may, by notification specify;
(b) Adhesive Stamp : These stamps shall be overprinted with the words Madhya Pradesh.
Adhesive stamp denotes a stamp bearing the words Court Fee and intended to be used under the
Court Fee Act, 1870 (No. 7 of 1870) and also a stamp bearing the word or words Special
Adhesive or Revenue or Foreign Bill or Share Transfer Advocate or Notarial or Agreement or
Brokers Note or Insurance and intended to be used under the Act;
(c) e-stamps : An electronically generated impression on paper to denote the payment of
stamp duty or such other amount that would have otherwise been paid as an impressed or
adhesive franked stamp issued from the ESS :
Provided that the Government may, by notification, provide for stamping to be done through any
one or more type of stamps or Stamping method, for any one or more types of documents or
values thereof.
CHAPTER II: OF IMPRESSED STAMPS
4. Hundis – (1) Hundis, other than hundis which may be stamped with an adhesive stamp
under Section 11 shall be written on paper as follow, namely :-
(a) A hundi payable otherwise than on demand, but not at more than one year after date or
sight, and for an amount not exceeding rupees thirty thousand in value shall be written on paper
on which a stamp of the proper value bearing the word "hundi" has been engraved or embossed,
(b) A hundi for an amount exceeding rupees thirty thousand in value, or payable at more than
one year after date or sight, shall be written on paper supplied for sale by the State Government, to
which a label has been affixed by the superintendent of Stamps and impressed by him in the
manner prescribe in Rule 11.
(2) Every sheet of paper on which a hundi is written shall be not less than 8- 5/8 inches long
and 5-1/8 inches wide and no plain paper shall be attached thereto.
(3) The provision of sub-rule (1) of Rule 7 shall apply in the case of hundis.
5. Promissory notes and bills of exchange – A promissory note or bill of exchange shall
except as provided by Section 11 or by Rules 13 and 17, be written on paper on which a stamp of
the proper value with or without the word “hundi" has been engraved or embossed.
6. Other instruments – Every other instrument chargeable with duty shall, except as
provided by Section 11 or by Rules 10, 12 and 13, be written on paper on which a stamp of the
proper value, not bearing the word "hundi" has been engraved or embossed. In the matter of the
descriptions of stamps to be used, "counterparts or duplicate" shall follow the rule applicable to
the original documents.
7. Provision where single sheet of paper is insufficient –
(1) Where two or more sheets of paper on which stamps are engraved or embossed are used to
make up the amount of duty chargeable in respect of any instrument, a portion of such
instrument shall be written on each sheet so used.
(2) Where a single sheet of paper, not being paper bearing an impressed hundi-stamp, is
insufficient to admit of the entire instrument, being written on the side of the paper which bears
the stamp, so much plain water-marked paper available for sale with stamp vendors may be sub-
jointed thereto as may be necessary for the complete writing of such instrument:
Provided that in every such case a substantial part of the instrument shall be written on the sheet
which bears the stamp before any part is written on the plain water-marked paper subjoined.
8. Ten Nay Paise, Fifteen Naya Paise and Twenty Naya Paise impressed stamps - The
duty on any instrument which is chargeable with a duty of ten naya paise under the Act or of
fifteen naya paise under articles 19, 36, 37, 49 and 52 of Schedule I or of twenty five naye paise
under articles 5 and 43 of Schedule I-A may be denoted by a coloured impression marked on a
skeleton form of such instrument by the Superintendent of Stamps.
9. The proper Officer – The Superintendent of Stamps and any other officer appointed in
this behalf by the State Government are empowered to affix and impress or perforate labels. The
Superintendent of Stamps or the officer so appointed in this behalf shall be deemed to be "the
proper officer" for purposes of the Act and of these rule.
10. Affixing and impressing labels by proper officer – Labels or Stamps may the affixed
and impressed or perforated by the proper officer, in the case of all instruments chargeable with
stamp duty under the Act.
11. Mode of affixing and impressing labels-
(1) The proper officer shall, upon any such instrument specified in rule 10 being brought to
him before it is executed and upon application being made to him, affix thereto a label or labels
of such value as the applicant may desire and has paid for and impress or perforate such label or
labels by means of stamping machine (including Franking Machine) or perforating machine and
also stamp or write on the face of the label or labels the date of impressing or perforating the
same. In the case of instrument written on parchment, the label shall be further secured by means
of metallic eyelets.
(2) On affixing any label or labels under this rule, the proper officer or any officer
subordinate to him duly authorized by him shall, where the duty amounts to rupees five or
upward, write on the face of the label or labels his initials, and where the duty is not less than Rs.
20, shall also affix his usual signature to the instrument immediately under the label or labels.
(3) The procedure for impressing or perforating the stamp labels affixed or impressed in
accordance with Rule 10 of the Madhya Pradesh Stamp Rules, 1942 on the instruments which
are executed by or in favor of any Nationalized Bank or Rural Bank and presented, to any proper
officer specified in this Department's Notification No. 411-333 VI-77 dated the 7
th
June, 1977
will be as follows :–
(a) Special adhesive stamp labels required for affixing on instruments would be purchased by
the Banks from the treasury or sub-treasury.
(b) Special adhesive stamp labels would be affixed by the Banks to the concerned document.
It will be the duty of Banks to ensure that these are affixed to only such documents in respect of
which this procedure is permitted.
(c) The cancellation shall be done in all cases irrespective of the value of stamps as follows
:–
(i) A rubber stamp "Cancelled" shall be affixed twice on the stamp itself in such a way that
at least half of the word "Cancelled" falls outside the boundaries of the stamp labels one on either
side as shown below: –
Signature Signature
................... ....................
Date Date
(ii) Below that portion of the word (at both places) which falls outside the stamp labels, the
authority concerned shall affix his signature and date. In giving the date care should be taken not
only to mention the date and the month but also the year,
(iii) The date on which the stamp is cancelled in the above manner by the proper officer will
not be deemed to, be date of execution of the instrument. The date of the execution of the
instruments will be indicated in the instrument itself by the parties concerned.
(4) Procedure for use of Franking Machines :–
(i) The franking Machines may be used for franking impression of stamps on all kinds of
instruments on which stamp duty is payable under the provisions of the Act.
Special Adhesive
Stamp
Cancelled Cancelled
(ii) At the offices of the Collector of Stamps of all districts and offices of the Sub-registrars,
the Franking Machine shall be used exclusively for impressing stamps bearing words as special
adhesive stamp and the proper officer appointed under rule 9 of these rules shall endorse his
usual signature immediately under franked impressions of special adhesive stamp in the same
manner as provided in case of affixing and impressing of labels under sub-rule (2).
(iii) The Franking Machines shall be purchased and supplied by the inspector General of
Registration to the offices of collector of stamps of the districts and offices of the sub-registrars.
(iv) The Machine Should be operated under strict control and supervision of the proper
officer by an employee of the office of the collector of stamps and in the offices of Sub-Registrar
by the Sub-Registrar as the case may be. The machine shall be installed at a place in front of the
proper officer or the sub-registrar only, as the case may be.
(v) Before using the machine for the first time it shall be authorisedly loaded and sealed by
the Collector of stamps.
(vi) The collector of stamp or the sub-registrar shall maintain a registrar in Form FM-1 about
periodical loading in case of each machine separately and shall send returns in Form FM-2
weekly to the Deputy Inspector General of registration of his Jurisdiction who shall send the
consolidated return of his Jurisdiction to the Inspector General of Registration every week. Each
entry in form FM-1 shall be authenticated by the collector of stamps jointly with proper officer
or the Sub-Registrar as the case may be.
(vii) The Collector of stamps of the District concerned shall take permission in writing from
Inspector General of registration in advance regarding periodical loading of the machine. The
machine shall be loaded/reloaded by the Collector of stamp only after receiving sanction from
the Inspector General of registration for such reloading. The entries in form FM-1 in respect of
each re-loading shall be authenticated by the collector of stamps jointly with the proper officer or
the Sub-Registrar as the case may be. The specific order to the Inspector General of registration
for sanctioning reloading shall be mentioned against each entry in respect or such re-loading.
The sanction for reloading should be sought by the Collector of Stamps in such a manner that the
machine shall not remain idle for want of reloading for more than a week's period.
(viii) (a) The meter seal (of lead) shall be of Collector of Stamps and the proper officer or
the sub-Registrar as the case may be shall affix his wax seal also.
(b) The access code to the numeric lock of the franking machine shall be exclusively
with the Collector of Stamps or the Sub-Registrar as the case may be who shall be responsible
for non-disclosure thereof to any body else and who shall maintain an independent register with
him in respect of each loading or reloading about increasing of the amount.
(ix) The proper officer or the Sub-Registrar as the case may be shall ensure that the seals are
not tempered with in any way by any of the officials or the machine is not handled in any manner
by an unauthorized person.
(x) The plier for the seal shall be supplied to the officers of the Collector of Stamps
simultaneously with the supply of machine, with the intention to ensure the machine is brought
into use without delay. Such pliers will remain with the concerned officer and such officer shall
be personally responsible for the misuse of the same.
(xi) The Collector of Stamps and the Sub-Registrar shall be responsible for the custody of the
machine installed in Collector of Stamp's and Sub-Registrar office respectively.
(xii) A register in Form FM-3 shall be maintained by the concerning officer in which the
meter reading of both the meters separately at the commencement of the day and at the close of
the day will be noted. The difference between the two reading will be the total amount collected
in lieu of the impressions franked. One register shall be maintained for one machine.
(xiii) For daily use of the machine the franking of the meter should be checked at 00 value and
the opening reading invariably recorded in the register and also the date should be set before
commencing operation of machine in any spell of duty. In the same way the meter reading at the
end of the duty hour should also be recorded in the register and authenticated by Collector of
Stamps or by the Sub-Registrar as the case may be.
(xiv) The official when using the machine should maintain the accounting register issued to
him. In case if different clerks deal with the same machine, each clerk should record in the
register the meter reading at the commencement/close of his spell of duty and the amount shown
in the meters during the spell should also be attested by the Collector of Stamps or the Sub-
Registrar as the case may be.
(xv) The clerk who relinquishes duty should immediately handover the amount realized by
him to the proper officer or the Sub-Registrar, as the case may be under acquaintance for credit
as receipt.
(xvi) The repair of the machine shall be carried out by the manufacturer or his authorized
dealer. A register in form FM-4 shall be maintained for this purpose. The meter reading at the
time the machine gets out of order should be recorded in the register maintained. Re-loading of
the meter after repairs will be as per provision contained in clause (vii).
(xvii) The mechanic of the manufacturer or his authorized dealer should also make entries in his
job card, in which he shall note the particulars of the machine repaired, nature of the repair
carried out and the meter reading before and after repairs separately. These entries should be got
attested by Collector of Stamps. At the same time mechanic will also complete the entries in the
Form FM-4 of the machine being maintained at the Collector of Stamps Office.
(xviii) Inspecting officers shall in the course of their inspection tours, ensure that these rules are
complied with and the supervising staff is vigilant in following them. They should record the
result of inspection to their inspection notes.
Previous and next
Questions people ask
Is rule 3 of MP stamp rule 1942 still in force?
No repeal of MP stamp rule 1942 is recorded.