LawGrids logoLAWGRIDS.ORG

Form VI, Metro Railways General Rules: FORM VI

Metro Railways General Rules - Form VI

Text of form VI

FORM VI

FORM VI [See rule 5(1) {f}J BALLAST AND PERMANENTWAY ABSTRACT [PART II-SEC. 3(i)] Section: length: Metro Railway Gauge: mm 1. The permanent way consists of UIC 60 Kg, 900A, head hardened new rails of make 18 metres long, continuously welded ·and laid on concrete sleepers with the density of M+ 8 (1660 sleepers per km) .. The track on main line, viaduct, bridges, in tunnels and on elevated section is laid on plinth type ballastless track with rails supported on base plate at spacing of 600 mm C/C with approved . type of elastic fast�ning system. The remaining track at grade is laid with rails using approved type of elastic fastening system and 50 mm stone ballast with minimum cushion of 300 mm under the sleepers. 2. All the turnouts to be negotiated are 1 in 12 curved switches and 1 in 8.5 (or 1 in 7 and 1 in 9 as applicable} with thick web switches. Certified that tested and approved new permanent way materials have been used in this section and comply with the accepted specifications. Note: (a} A brief description to be given of the rails, fastenings, sleepers and ballast provided. Details of dimensions of rails, fittings etc should not be given in the case of standard section. (b} In the case of new rails and fish plates manufactured in _ India, the name of producer should be given. If they are imported, the name of the country of origin should be indicated. (c) A certificate should be submitted by the head of the civil engineering discipline that the materials are of. tested and approved quality and comply with the accepted specification. (d) This is only a sample form and may need changes according to the track structure provided. .,. ' ·Section: Length: Name of Kilometrage station · from fixed point FORM,VH···· [See rule 5(2.)'(g)J STATION AND STATION SITES Inter station Type of Type of. Metro Railway Gauge: mm Siding/loop, distance Platforms Interlocking if provided, (Island or if with length side) Interlocked (Metres) Remarks •. 236 .. ·· . THE O;AZETffi_QFJNDIA :.EXTRAORDINARY [PART II-SEC. 3( i)] - FORM VIII [See rule 5(1) (h)) BRIEF PARTICULARS OF ROLLING STOCK Section: length: S.No Description (1) {2) 1. Rolling Stock features (a) Composition (b) Train Control System (c) Max m Design Speed (d) Maxim Operational speed {e) Jerk rate (f) Maximum Tractive Effort 2. Physical Dimensions (a) car Weight (b)• Length over Body (c) Maximum Width over Body (d) Height of Floor from TOR (e) Total Height 3. Bogie Details (a) Bogie wheel base (b) Distance between Bogie Centres (c) Wheel Diameter (d) Type of Suspension 4. Braking Details (a) Type of Braking System (b) Max. Braking effort (c) Service braking effort• *From maximum operational speed to stand still, for fully loaded train on level tangent track. (d) Parking Brake 5. Electro Magnetic effect on Environment (a) Electro Magnetic interference 6. Safety features (a) Communication between train operator and passengers (b) Provision of Dead Man Handle (c) Fire Prevention, detection and suppression system (d) Other Safety Features Details (3) ' Metro Railway Gauge: mm Remarks (4) Certified that the design has been checked for being within the Kinematic Envelope (KE) in all conditions. ( ['lWT II-'-� 3(i)]

Previous and next

All provisions of Metro Railways General Rules

Questions people ask

Is form VI of Metro Railways General Rules still in force?

No repeal of Metro Railways General Rules is recorded.