Rule 16, Legal Metrology Approval of Models Rules 2011: J1IS~ m ~ Rrm cnT ~ Ch{crtl
Legal Metrology Approval of Models Rules 2011 - Rule 16
Text of rule 16
J1IS~ m ~ Rrm cnT ~ Ch{crtl
16. J1IS~ m ~ Rrm cnT ~ Ch{crtl -- (1) ~JCF ~ 3ft (if1C m
m, ~'H~ ~ ~ 3i'jtH)Rfl fcF;m ~ ~ ~ 3f~ ~ f%m :HticCh ~ ~
5dt ~ ~ CR" {fBf ~,~ tR :m- ~ (>fJ)" fcF; ~ "1Ci1f6fl ~ ~ fcF;m "1raif
~<fCfi ~I
(2) 3qQlliA (1) ~ ~ ~ ~ crRr 3"I'jA1Rfl ~, WIT, Rt;IT ~ ~
CfiT ~ 3tt{ ~~rr ~ lFim ~ ~ Rmt:r m LilI(!dll 3tt{ ~ GRT ~
~ ~ CI1ti' ~ li1IUdll 1
['WI H-~ 3(i)J
17. lht iIIC zn ;mq- $ tmr 3lT<i& f-ilt!4; IllSi'[ q;r )f011l'1~.,
.,:)
filtHlcrll<"f: ~~ ~ ~ - (I) 3~Frt<:p:r aft l1RT 22 * .mftrr Jff.t:r ~
iiR" lIT ~ * ~ * 3iCrlCH)~iif * Qa)61.,n1, 3fRt:r coN CJTCilT ~ :ffi ifTC.:l
lIT;rrtr* ~ * ~ ~ 3mn~ ~ ~ ~~ CfiT ~ 3th" ~ ~
~ ~
~~~~~~~~~~UfRTT ~ 1%m~3i1rcrr61TtT*~*.:>
ma-rur ~ 3mf~~ 6, fafa:lHirll ~ ~ mT fa:lfe;tsc ~1G=4rll«;ilC(""! ~mrr rnr
~ 1ifs<;r ~ qiT8;fUT ~ ~ ~ q:;)- ~ ~ *~ mgalll
.:l . ~ •
tfraTT <ITa- ~ 3maT d1fcr"q;r ~ 3ft ~ ~ ~ a:r ~, m fafcACA1CiT q;r ~.:> .:>
~ Ncm 1% ~ fcl fcACA101 ~ IDn ~ ~ 61TtT~ ~ q;r V<ll crrCAiTIT 3,qcnrr
"q;t 3-l'R- ~~ GRT fa:lm¢c CAIa-:&QrlIQIC(""!~~m irm" :m ~ CfiT ~ ct ~
"~<R-I.:>
(2) CAIo-:&Qrll«;ilCCi" «;i:q)JI~m CfiT 3qfiA:&QfA' (1) * ~ t:rfra;o-IT CfiT ~ * ~
Glrlo:t) ~ ~ ~, 3a:r qiT~ ~ Qftom"lT q;r ~ ~~fCh C1cfi ~ ~ ~
.:>~1
(3) <ITa- ~ t:rfra;o-IT * Qftollcm CfiT ~ * ~ ~~fCh ~ ~ ~ f% ~
.:l
.3n1qf~, ~ 3ft CAICA<>rT~, ~ * 00 <IT mfra:r ~ CAICrlCf)T*~~
" .:>
~ [t, <IT filr.lAliIT 'liT 3;f '6lJlm 'liT ~ mr ~R"<: W!>r <l;- ~ "" ~ <l;-
felv ~ ~ [t; 3It< ~ ~R"<: W!>r <l;- ~ ~ ;f q;fmIi "" ~ ;fit ~,
fcli¥fHior CfiT <>11$:Hff, f01'?.imf WeT ~ tifTC 31t.rcrr 61TtT* FclfiACA'jol it ~ Kih'ic6
CATs<>r m ~ CfiT ~ ~ JT'4T trr, q:;)- R" ~ ar ~"fcf.>()11 I"
18. JJCTlCf)~q flICHRr<if ~ tRTafUT ~ ~ ~ __ (1) 3iCrlCfl~q- ~ICAc(1t
.,:) .:>
fafiACAlrll rnT FclfcACA101 * ~ cnr.t ~ ~ ~ mc:r ~ * ~ ~~ CfiT 3t;r ~
~ ~, ~ ~ CAIG=4(iIQICrl 3Q:&QCf(=f ~m>rr q:;1- 3iCrl~)~Oi ct Rffi:! ~
.:l .:>Q:> '(I~ a II I
~(2) ~ 311Cfl~q- ~ICACIj) CAIG=4rlIQIC(""! ~JT(>ff -if ~ ~ ~ 611Uc) ft, CT6'
~m;rr ~~ ~ Cfitm JfR ~ ~ Cfitm 1% 3iCrlCfl~q- ~ICA~ CfiT ~
.:l , ,:m «;i:&Q);;JtCrlq:;)- tm Cflt ~~4; fffir nr ~ q:;)- 3101CA)~1Tf ~ trr Jttt ~
" .:>
CAIa-:&QrlIQ,C(""!Q:&Q)Jr~m ~ m:r a- f% ~ 31ITfCfl~Q ~'CA.w 3Q:&QCf(i a:rtr 6, ~ ~ ~
.:> .:>
~ ;;::rQ" CATs<>r * l\tT it J:ffi1T ;;Jt1(Id III
14 TIlE GAZEITE OF INDIA: EXTRAORDINARY (PARTn-8EC. 3(i)]
(3) J41a-llCiI\OlIC(1\)gfl",~m;rr ~ 3'1a-a6fun CflT ~JCfi ell ~<:rn" ~ ~ ff{ChF{ CflT
~ cR:trrr1
19. ~.mrcrr ~ ~ JiYs~ ~ ~ ~ ~ tfiR:r _
~ 3i1da:Cl5 A<:l'41 q5- 311'{il'l 3i1da:., CP«1T 't ('f7,f Cf6 ~m;rr c:BT
tRr<WUT ~ q5- ~ ~ ~ lTcBR -rt Ufl1T ct>~.CJII IC\
(i) ~ m ell 6fTC m ;mq--JTm:rr ~ ~ rotr34ctJ<OI ell ~ ell ~ell
~ ~~m;rr ell q-~ ;R- fYlis ~ ell ~ ~ tITu- ~ ~ I
(ii) ~f\;)c(4 <.IT ~~Cf~)fa:lCfi m ell ~ zrr m.wrar ~ ~ m~ ell ~
ell ma:ror cf,- ~ ~~m>rr * q-~ B fYlis ~ ell ~ ~ ~ ~ ~ I
(2) 311da:Cl5 34~4<H (1) B ~T ell 3iGR1R 3101Cfi("4 ffl<H"Jr ell trfra:ror ell ~
.:> .:>
qfra=rur ~ crft 3ln:IT ~ un:rr cp~CJTf I
20. ~ m d=fN ct ~Fa1Ji1or ~ ~ ~ ~1$'f1ff arfr ~ _
(1) ~ ~ ~ .mmr m ell fdfa:lfH'jUr <:IT 3fRml ell fcitcr (41~~ff ~ ~ ~ ~
m ff{CfiI{ 116 ~c1 CR" ~ Fcf; m ~ .mrcrr ml. ChT 3101fH)~crt CfiT qfHlOl4~
.:> .:>
~ ff{CflI{ *~ *mu 22 cf,- .mfta:r ~ m:rr ~I
(2) ~ ~ :lit ~ ~ 3101Jfl~crt CfiT ~ ~ QJ4IUI4=1 ~ ff{ChI{ rnr ~ CR".;)
fa<:rr m:rr n, m ff{CflI{ rnr ~ ~ ~ JTm:rr rotr ell fdfa:l<H)ul 3ftrcrr 3fRTR=r t<=r
.;)aRT (>fl$~fl ChT ~~U1(1 CR" fa<:rr '711(jdlll
tf{a=(1" .~ f(AN ~01 ~ Fcflm '711l!J II m=e- TIT <HTs<>r CflT ~ '(OnChI{ mr 3101fH)~01 t;I'Jt:(1"
.;) .;)~ ;:;mr,
21. ~H'Iif 3ft{ c411fri1:ai - (1) me 3ffi" d1J1T ~ (~ CfiT 311fH'~a:r) ~, 1987
(~ ~ ~ ~UT{f 3CfC1 fa1m:r ~ ilTm ~") ~ ~ [RT ~'(~('f fcf;m ~ &1
['1f7T I1-~ 30) ]
:
1.5
(q;) ffii fv1m:rl em ~ ~ m ~ 3rtfta.r at cfiT dT$" m ~ ~ (fiT ffitr ~ 7f<rr m
3"t ~ a=mt; m
.:J
(N) 3ct(T fv1m:rl cl; 3itfr;r ~, ~ m 3tmn ~ ~, ~~, alRlc=<f m
3n'"HaIQi(=Cf; m
(1T) 3ct(T fotm:IT cl; ~ ~ d1l[ ~ Jrtmtr cl; mit.r ~ ~ ~rrfF(:r, ~ <IT ;3; mrcrr
('0) ~ ~ 1Rt ~~, ~~. GfIt..~. i!,Rlc=<f, 3n:'f{i!I Qi{"CI, ~rrfF<:r, ~" .:J
m c3 cl; thnr ~ ~ ~, ~ Cfil4CfIt!" m 3"Cmr1
~ W ~ ~, ~ Chl4Cf/~ <IT 3"tJ"t:tR ~,~ ~ NT<IJ: ~ ~ .~ ~
thfT ~ ~rrffc:r, ~ m' ~ ~ ~ cf.;)- ~ ~ <rf't 3Cf(1 ~ em faafUSC"f ~
~ 1T<rr1
=
(2) M~ ~Hi if cl; ~ scr 3ft fctRrr 1T<rr <IT cfiT ~ ~ Cfll4Cfltft m ~ ~ cl; ft;W
(1/("q~C"f m tr:f m lJC;ITf iF". :HdJ~(1 tfi'm. ~ ""4Fa~o14, ~ m ~ ~ ~. iIlC
~ ;mq cl; fa ~ Jil (11m, c<lj1~I~:aT 3tR" JJ I \QI C"I Cfi1 cfiT 31if if fCc:r, '( f:])=t{ICfi'(0 I , m iR1T3IT
..)
~, ~-m.r, ~, JJifHtc\OOf, 3CfCl folm:rr ~ .mfta:r ~, ~ 1T<rr m.rcrr FcIi<:rr 1T<rr.:J
~, ma- 3CfCl ~ cl; ~ ~ ~ ~ ~ 6" dT WfT ~ 3tR" ~ w:tiR ~
M, m;:rr a- ~ ~ cl; ~ 31«im ~ JruTa:r ~ ~. yzy ~ ~ d1l[ ~I
(3) ~ fot<rnt ~ ~, ~ ~ ~ <IT w=4" ~ em ~ d1l[ ~ ~
m ~ fot<rnt cl; mi"3i tR" ~ ~ 3ft{ JiTCf ~ ru~Jilffim, 31141C"1Cfil c4l~j~\Ql cf,T
)iii if fCct, '{fa 'l{)Cfi'{ 01 cl; ft;W 3CfCl fot<rnt c1> 3rtfta.r ~ d1l[ ~ ~ tR" C"f"trr ~.:J
~"iTf("f ~ Chi~CfJ~ tR" 3ft{ :mc1> )iii 'H '{ 0 I ;q 3fci'JG;ITr ~ '(fa 'f{lCfl'( 0 I tR" ~ MJ
.:J.:J "
(4) ~ fot<rnt c1> t;nU:r ~ 3Cf(1 ~ ~ ~ ~ cr;Q I\Q I(>f \Q cR- ~ CfiT$" ~ ChI~Cfj$
~ cr\Q141(>i\Q ~ ~ 1TtfiR ~ ~ ~ man- ~ fvtm:r fa:IJil C"I" ~ ~ m! m-I
\
(5) ~ 3Cf(1 ~ c1> .mfr;r <fiCiifl4 ~ lIT m ffi"CflTt CflT cfi>r ~ ~ ~
3ft{ :mcf;T ~ ~ ~ ~ cl; ~ :rnitIT c1> .mfto:r cf,T dT$" ~ ~I
["tfiT.~. ~ ~-9(6)/2010-~]
~~.~~
16
THE GAZEITE OF INDIA: EXTRAORDINARY [PARTII-SEC. 3(i)J
MINISTRY OF CONSUMER AFFAIRS, FOOD AND PUBLIC DlSTRmUTION
(Department of Consumer AtTairs)
NOTIF1CATION
New Delhi, the 1stMarch, 2011
GS.R.l83(E).::"'lnexercise of the powers conferred by sub-section(1) read with clause (m)
of sub-section (2) of section 52 of the Legal Metrology Act, 2009 (1 of 2010) , the
CentralGovernment hereby makes the following rules, namely:-
CHAPTER I
PREUMINARY
1. Short title and commencement.- (1) These rules may be called The Legal
Metrology(Approval of Models) Rules,2011.
(2) They shall come into force on the 1stday of April, 2011.
2. Definitions.-(l) In these rules, unlessthe context otherwise requires;
(a) "Act" means- the Legal Metrology Act, 2009 (1 of 2010);
(b) "Model" means the final physical representation of a weight or measure in which
all the components imparting to it the necessary metrological and technical
characteristicsand qualities as provided.in the Act and the rules made there under are
suitably assembled so that subject to prescribed tolerances, every weight or measure
produced in accordance with such model may be similar as regards dimensions,
constructions, material performance and other metrological and technical
characteristics;
(d) "PrincipalOfficer" means the officer who is in charge of the laboratory;
(2) words and expressions used herein and not defined but defined in the Act, shall
have the samemeanings respectively assignedto them in the Act.
CHAPTER II /'
Recognitionof Laboratories
3. General provIsions relating to laboratories.-(1) The list of recognized
laboratoriesshall be notified from time to time.
(2) A laboratory recognized under these rules shall carry out any test for the approvalof any model.
(3) In allocating any model of weight or measure to any laboratory, the Director shall
take.into account the existence or otherwise of the facilities available in that laboratory
for the approval of such model. .
['WI II-~ 3(i)]
17
\
4. Recognition of Laboratories.- (1) Every laboratory desirous of obtaining
recognitionunder these rules for canying out tests for the approval of the model of any
weight or measure shall make an application to the Director in the form as may be
notified from time to time.
(2) Everyapplication referred to in sub-rule (1) shall be made by the PrinCipalofficer of
the laboratory.
(3) When an application is made under sub-rule (1) for the recognition of a laboratory,
the Director shall, before issuing the certificate of recognition send one or more of his
officers to the laboratory and obtain a report whether the laboratory,-
(a) has the necessarymeasuring equipment, testing facilities and buildings maintained
In a proper conditions;
(b) has the necessary qualified staff, component to undertake the tests for
recommending the approval of model of the concemed weight or measure;
(c) is Situatedin an appropriate environment;
(d) hasan adequate recording system;
(e) is likely to give expeditious efficient and adequateservice; and
(f) is ready and willing to get its equipment verified periodically by such other
appropriate laboratory, as may be specified by the Director.
(g) has the certificate issued by the NationalAccreditation Board of laboratOries (NABL)
in the parameter or field in which model test is proposed to be undertaken.
(4) The Director shall, after considering the information supplied to him by his Officer,
or officers referred in sub-rule (3) and if necessary,after a visit to the laboratory, shall
issueto the applicant laboratory a certificate of recognition specifying therein the terms
and conditions subject to which the recognition is granted, and the code number which
has beenassigned to the laboratory.
(5) Where no application for the recognition of a laboratory has been made, or where
such application having been made has not been disposedof, the Director may if he is
satisfied that it is urgently necessaryso to do, issue, with the consent of the principal
officer in-charge of the laboratory a provisional certificate of recognition to a laboratory
which, in the opinion of the Director fulfils all the requirements of sub-rule(3) and the
provisionalcertificate so issued shall be valid for one year.
(6) The certificate of recognition granted to laboratory may be suspended by the
Director in the event of the omission or failure on the part of the laboratory to observe
the terms and conditions specified under sub-rule (4):
Providedthat no such suspension shall be made except after giving to the laboratory a
reasonableopportunity of showing causeagainst the proposedaction.
(7) Where any certificate of recognition to a laboratory is suspendedunder sub-rule (6),
the order of suspension shall not be vacated unless the omission or ..failure of
compliance of terms and conditions for which such suspension was made has been
madegood.
(8) The Director or his authorised officer may visit the laboratory as and when required
and the Principal Officer will permit inspections and render all assistance for the
18 THE GAZEITE OF INDIA: EXTRAORDINARY [PART II-SEc' 3(i)]--_ - -----".
purposerncluding the production of records with regard to model testing.
(9) The Principal Officer shall submit annually to the Director a report in respect of the
models tested by them, the fee collected, time taken for each testing and such other
relevant particulars.
(10) The Principal Officer, while testing the models adopt such procedures as may be
prescribedby the Director from time to time.
(11)The certificate of recognition granted to a laboratory may be cancelled by the
Director if the Circumstancesof the laboratory are such that it cannot be reasonably
expected to function properly as a recognized laboratory or if there are sufficient
reasonsto suspect that the laboratory has been guilty of corrupt practices.
Provided,that no certificate of recognition shall be cancelled except after givmg to the
concerned laboratory a reasonable opportunity of showing cause against the proposedaction.
CHAPTER III
APPROVAL OF MODELS
5~Application for the approval of models.- (1) An application for the approval of
modelshall be made to the Director and shall contain.-
(a) the full name and address of the applicant or where the model is imported from
other countries, the name and address of the manufacturer as well as the dealer inIndia.
(b) a brief description of the weight or measure the class to which it belongs and the
probableuses for which the weight or measure is intended to be produced;
(c) data regarding metrological and technical characteristics and qualities of the weightor measures;
(d) test procedure followed by the manufacturer;
(e) trade name or brand name and type of the weight or measure, and
(f) the requisite fees specified in rule 19.
(2) Everyapplication shall be accompaniedby not less than two copies of,-
(a) a sketch and section-wise drawings of general arrangements and installation of such
weight or measures including therein the details of construction of the weight or
measure in such manner as to enable the visualization of the weight or measures in itsfinished form, and;
(b) a document describing the following namely:-
(i) the principles of construction and the method of operation of the weight or measure;
(ii) the safety devices provided to prevent any fraudulent or inaccurate operation of theweight or measure;
(iii) the manner in which and the extend to which the weight or measure may beadjustedor corrected;
(iv) the placewhere the verification stamp or seal, or both, may be affixed;
(v) plans of general arrangements and installations drawings of the weight or measure
and, where necessary detailed installation instructions;
(vi) two photographs of the model clearly indicting the mandatory declarations to be
[qrrr Il-~ 3(i)]
included as a part of the certificate of approval of the model;
(vii) actual circuit diagram (for digital type);
(viii) place/places on the instrument Where the verification stamp or seal or both have
to be applied to prevent fraudulent practices;
Ox) copiesof the users manual, printed pamphlets and other literatures;
(x) any other information which the applicant may consider to be useful for assessing
the performance, and facilitating the approval of the model;
(3) If the weight or measures Is provided with supplementary or additional devices, full
Information with regard to such supplementary or additional oevkes, such as draWing,
descriptions in relation to the said weight or measures, shall also be given along with) the application. ~ •
6. SubmiSSionof the models of weight or measure.-(l) Every person, who
submits any model of weight or measure or weighing and measuring instrument for
approval (hereinafter in this rule referred to as, the applicant), shall deposit to the
credit of the recognized laboratory, a fee as prescribed in the rule 19 of these rules.
(2) All the documents referred to in rule 5 shall be sent by the Director to the
recognized laboratory which carries out the tests for the approval of the model, to
enable the laboratory to ascertain whether such documents conform to the details of
the results of the tests carried out by it for the approval of that model."
(3) Where the nature of weight or measure is such that due to its voluminous nature it
cannot be submitted to the laboratory for testing, the recognized laboratory may under
take the testing of such model at such place as it may deem fit:
Provided that, where the test is undertaken at any premises other than those of a
recognizedlaboratory, the applicant shall pay for the duration of such test, the traveling
and daily allowances of the persons deputed for such tests and such allowances shall be
payable at such rates as may be admissible to such persons in accordance with the
rules in force in the recognized laboratory."
(4) The applicant shall provide such faCilitiesas may be required by the team of persons
deputed by the recognized laboratory for the purpose of carrying out the necessary
tests for the approval of the model.
(5) The installation, tests and removal of the model shall be done at the cost and risk ofthe applicant.
(6) The Central Government and the recognized laboratory shall not be responsi~le for
any Jossor damage that the model may sustain the course of examination and testing. ~
(7) Where any model submitted to a recognized laboratory for approval is not removed _
by the applicant after the expiry of six months from the date on which a certificate of
approval was granted or refused in relation to such model, such model $haJlbecome
forfeit to the Central Government, and that Government shall dispose of the model insuchmanner as it may think fit.
(8) The Director may, if he is satisfied that the test for the approval of any model is
likely to take more than three months and on receipt of satisfactory preliminary test
reports from the laboratory, issue subject to such conditions as may be specnied in the
certificate, a provisional certificate to enable the manufacturer, to manufacture at his
THE GAZbTfE OF INOlA: EXTRAORDINARY [PART II-SEC. 3(i)}
own risk the weight or measure in relation to which the model has been submitted for
approval:
Providedthat manufacture, distribution or sale of such instrument shall be discontinued
immediatelywhen the provisional model approval certificate has been withdrawn by the
Director.
Providedfurther that in case the tested model does not meet the requirements of the
model approval test, all instruments covered by the provisional certificate and sold in
the market shall be withdrawn with immediate effect at the manufacturer's cost.
7. Tests for the approval-of model.- (1) The tests needed for the assessmentof the
fitness or otherwise of a model submitted for approval shall be carried out under the
normal conditions of use, whether actual or stimulated, or the weight or measure and
shall be madewith a view to -
(a) ascertainingwhether such model conforms to the standards established, in relation
to such model, by or under the Act and the rules or to the recommendations of the
International Organization of LegalMetrology (OIML);
(b) finding out the ability of such model to maintain accuracy and other metrological
characteristicsand qualities after it has been put to use for such minimum number of
times or over such minimum period as the Director, may, by general order, specify in
relation to the class of weight or measure to which the model pertains;
(c) determining the performance of such model under varied conditions of use;
(d) determining the metrological and technical characteristicsof the model after taking
into account the possible incidence of influence factors and their effect on metrological
and technical characteristics;
(e) determining whether they carry the mandatory declarations required under the Act
and the rules;
(f) determining whether the place or places of sealing'on the instrument suggestedby
the manufacturer is suffiCient to prevent their fraudulent use; . '
(g) determining generally, the behavior of the model, that is to say, its robustness,
reliability and susceptibility to fraudulent use;.
(2) Everymodel shall be tested in accordancewith such test procedure as may be laid
down by the Director in relation to the classof weight or measure to which suchmodelpertains;
Provided that until the test procedure is laid down by the Director in relation to any
classof weight or measure, the test of any model pertaining to such classof weight or
measure shall be carried out in accordance with such procedure as would, in the
opinion of the recognized laboratory, enable it to recommend the grant of certificate of
approval in relation to such model.
8. Procedure for the issue of certificate of approval. - (1) After the completion of
the tests, the recognized laboratory shall send a report of its findings to the Director
with its recommendations whether the model satisfies the requirements of the Act and
the rules made there under.
['1JlT II-~ 3(i)J
21
)
(2) The recognized laboratory may in an appropriate case,.' recommend that the
approval may be accorded provisionally to enable it to conduct detailed tests and where
in pursuance of such recommendation, provisional approval is granted, test may be
carried out on such number of instruments under such conditions of installation and
use, as may be specified by the Director, and such tests may also be continued, where
the recognized laboratory thinks fit so to do, in the place of use of the weight or
measure,and the tests at such place of use shall be detailed ones and of such duration
and carried out on such number of weights or measures as may be specified by theDirector.
(3) The Director may require the recognizedlaboratory to send to him th~ detailed test
procedureadopted by tfiaf laboratory in approving the concenied model.
(4) On examination of report made by the recognized laboratory, the Director shall,
where he is of opinion that no further test is required to be carried out, submit the
report to the Central Government and where he is of the opinion that further tests are
required, remit the report back to the recognized laboratory for carrying out such
further tests; and there upon the recognized laboratory shall, after carrying out further
tests, submit a report to the Director.
(5) Where consideration of the report of the recognized laboratory, the Director is of
the opinion that a certificate of approval in relation to that model should be issued, it
shall recommend to the Central Government the issue of the certificate and shall also
forward to that Government a copy of the report submitted to it by the recognizedlaboratory.
(6) The Central Government may, if the issueof a certificate or provisional certificate of
approval has been recommended by the Director, issue such certificate and authorize
the Director to authenticate the certificate for and on behalf of the Central Government.
(7) No provisional certificate issued under sub-rule (6) shall remain valid for a period
exceedingone year from the date of its issue.
Provided that the Central Government may, if is satisfied, on the recommendation of
the recognized laboratory, it is necessary in the public interest so to do, extend the
periodof validity of the provisional certificate for suchperiod as it may think fit;
Providedfurther that the Central Governmentmay also, on an application made to it by
the concerned manUfacturer, extend the period of validity of the provtslonet certificate
for such further period as it may think fit if it is satisfied that the recognized laboratory,
having failed to complete the tests before the expiry of the period of validity o. the
provisional certificate, has unreasonably omitted to recommend the extension of suc~period.
(8) A code number shall be assigned to each approvedmodel and the code number so
assigned shall be indicated in the certificate, or proviSionalcertificate of .approval, asthe casemay be.
(9) Where the model of any weight or measure to which these rules are applies has
been approved, the models of different denominationsof such weight or measure shall
not require any approval of such denominationswhich are manufactured in accordance
with the same principles according to which, and the same material with which the
approvedmodel has been manufactured.
t
L
--, -_-"_
-------------------------- ....
22 THE GAZETTE OF INDIA: EXTRAORDINARY [PARTlI-SEc. 3(i)]
9. Procedure where issue of certificate of approval is not recommended. _
Where the recognized laboratory does not recommend the issue of a certificate of
approval in relation to any model, it shalf specify its reasons therefore to the Director
who shall communicate such reasons to the applicant with such directions as he may
think fit and thereupon the applicant may make a representation to the Director to the
effect that the issue of the certificate of approval should have been recommended by
the recognized laboratory and on considering such representation, the Director may
either reject it or recommend to the Central Government the issue of certificate ofapproval.
10. Re-submission of-disapproved model for approval. - (1) Where any model is
not approved, the disapproved model may be re-submitted for approval after carrying
out therein such modifications as may be necessary.
(2) Where any disapproved model is resubmitted for approval, it shall be deemed, for
the purposeof levy of fees and tests under these rules, to be a fresh application for theapprovalof that model.
11. Contents of a certificate of approval. - (1) The certificate Of approval shall also
containthe following information's namely: _
(a) the number of the certificate;
(b) a brief description of the model;
(c) the mark assigned to the approved model;
(d) the category of weight or measure;
(e) a brief statement of the results of the tests;
(f) the special conditions, if any, to be complied with for the manufacture, verification
and useof weights or measuresconforming to the model; and
(g) the placeor placeswhere the verification seal or stamp or both may be affixed.
(2) The certificate of approval shall become effective on and from the date of its
publication in the OffiCialGazette.
(3) Where any weight or measure is intended for a special use, the certificate of
approval in relation to such weight or measureshall indicate the specal use.
(4) The Director shall cause the necessary model certificate to be published in theoffiCialGazette.
(5) the Director may also causethe information referred to in the foregOingsub-rulesto
be published in the journal, if any, published by the Centralgovernment.
12. Mark of approval. - (1) The mark assignedto the model shall contain the national
identification letters, namely, IND, the last two digits of the year of the issue (for
example, 77), the code number aSSignedto the laboratory and the code numberassignedto the model.
(2) The mark aSSignedto the approved model shall be clearly and legibly affixed at
such place of the model as may be specified in the certificate of approval and also on
eachweight or measure produced by the maker or manufacturer in accordancewith the
[tfTlT II-l§US 3(i)]
23
approved model:
Provided that if the approved model· of the weight or measure conforming to such
model is such that the mark assigned to the approved model cannot be affixed on it
(for example, where it is fragile or too smail), that mark may be associated with the
conditions specified in the certificate of approval:
Provided further that, where the approval is of a limited character, the mark of approval
shall be accompanied by a special mark indicating the limitations of the approval and
different special marks may be made for different limitations.
,
13. Revocation of certificate of approval. - (1) A certificate of approval may be
revoked if the Central Government is satisfied that; -
(a) the model whictf had been previously approved no longer complies 'with the units
specified in the rules made under the Act, or
(b) the model has ceased to conform to the standards for the time being in force in
relation to such model, or
(c) defects in regards to reliability, accuracy or performance have generally been
noticed in the course of use of the products (weights or measures) manufactured in
accordancewith such model, or
(d) where the manufacturer does not following either wholly or partly, the conditions
specified in the certificate of approval:
Provided that no such certificate shall be revoked unless the holder of such certificate
has been given a reasonable opportunity of showing cause against the proposed action.
(e) where the manufacture or any other person has significantly altered the approved
design of the model or the circuit diagram.
(2) Where the certificate of approval of any model has been revoked, the production of
any weight or measure in accordance with such model shall be stopped on and from
such date as may be specified in such order of revocation and every weight or measure
made or manufactured at any time between the date of revocation and the speCified
date shall notwithstanding such revocation be subject to verification In accordancewith
the provisions of the Act and the rules in force on the date of such revocation:
Provided that where, on such verification, it is found that the use of any such weight or
measure is likely to cause errors, beyond those permitted for such weight or measures,
in any weight or measurement carried out with it, the Director may by order, prohibit
the sue of such weight or measure.,
14. SuspenSion of certificate of approval. - (1) A certificate of approval of a model
may be suspended by the Director in the event of the omission or failure on the part of
the holder of such certificate;
(i) to make or manufacture weights or measures in accordance with the model to which
the certificate relates, or
(ii) to conform to the rules or standards in relation to any weight or measure
manufactured in accordance with the model, or
(iii) to comply with the conditions specified in the certificate of approval:
Provided that no such suspensions shall be made except after giving to the holder of
t
24
THE GAZETTE OF INDIA: EXTRAORDINARY
[PARTII-SEC. 3(i)]
the certificate a reasonableOPPOrtunityof showing causeagainst the Proposedaction,
(2) Where any certificate of approval has been suspendedunder sub-rule (1), the order
of SUspensionshall not be vacated unless the omissIon of failure for which suchSuspension was made has been made good.
(3) Where the certificate of approval has been suspended under sub-rule (1), an
Inventory of the exIsting stock shall be made by the Controller of LegalMetrology of the
Concemed State who will also ensure that no further sale will be made unless the
suspension of the certificate of approval is revoked by the Director.
15. Revocation and Suspension of certificates to be published. _.Every order of
revocationor SuspensIOn'of certificate of approval shall be published, as far as may be,in the manner specified in rule 11.
16: Deposit of Models or its draWings, - (1) The Director may call for any weight or
measure,. the model of which has been approved or any of its component, or its
dummy, v.f!ere he is of the opinion that It is necessary so to do in the public interest.
(2) The approved models, parts, drawings or dummIes, submitted in accordancewith
the sub-rules (1) shall be preserved for the purposes of record and reference and shallnot be opened to inspection by the public.
Previous and next
← Rule 123iOitA)C\01 RlrgRule 17 →Provisions relating to weight or measure for which model approval is Ordinarily not necessary
All provisions of Legal Metrology Approval of Models Rules 2011
Questions people ask
Is rule 16 of Legal Metrology Approval of Models Rules 2011 still in force?
No repeal of Legal Metrology Approval of Models Rules 2011 is recorded.