Rule 12, Legal Metrology Packaged Commodities Rules, 2011: Manner in which declaration of quantity shall be
Legal Metrology Packaged Commodities Rules, 2011 - Rule 12
Text of rule 12
Manner in which declaration of quantity shall be
12. Manner in which declaration of quantity shall be.--(l) The declaration
of quantity shall be expressed in terms of such unit of weight, measure or
number or a combination of weight, measure or number as would give di 1
accurate and adequate information to the consumer with regard to the quantity
of the commodity contained in the package.
(2) Except in the cases of commodities specified in the Fourth Schedule, the
declaration of quantity shall be in terms of the unit of -
(a) mass, if the commodity is solid, semi-solid, viscous or a mixture of solid and
liquid;
(b) length, if the commodity is sold by linear measure;
(c) area, if the commodity is sold by area measure;
(d) volume, if the commodity is liquid or is sold bvcublc measure; or
(e) number, if the commodity is sold by number:
(3) Where the declaration of quantity has been made in terms of mass, the
manufacturer or importer or, as the case may be, the packer may, at his option
make an additional declaration on the packageas to the number of commodities
contained in the package.
(4) Where the declaration of quantity by weight or measure or number is not
sufficient to give to the consumer full information with regard to the dimensions
or number of commodity contained in the package, such declaration shall be
accompanied by a declaration of the dimensions or number, or both, where
[~f1rH-~ 3(i)] 3J===:=:============~-==--_.":::-'-:~::::-:_:-:':'~:C;;;:;::;:~
necessary,of the commodity contained in the package.
(5) Where it is necessary to communicate to the consumer any additional
information about the commodity contained in a package, such information shall
also appear on the same panel in which the other information, as required by
these rules, have been indicated.
(6) The declaration of quantity shall not contain any word or expression which
tends to create an exaggerateg, misleading or inadequate impression as to the
quantity of the commodity contained in the package, for example, words or
expressions like-'minimum', 'not less than', 'average', 'about', approximately' or
other words of a similar nature.
(7) For packages having capacity 5 cubic cm or less, the declaration of quantity
shall be made on a tag, card, tape, or any other similar device affixed to the
container in such manner that it cannot be removed without opening the
container and every such tag, card, tape or other device shall contain mark or
inscription which will enable the consumer to identity the manufacturer or
packer, as the casemay be.
Previous and next
← Rule 11General provisions relating to declaration of quantityRule 13 →Statement of units of weight, measure or number
All provisions of Legal Metrology Packaged Commodities Rules, 2011
Questions people ask
Is rule 12 of Legal Metrology Packaged Commodities Rules, 2011 still in force?
No repeal of Legal Metrology Packaged Commodities Rules, 2011 is recorded.