LawGrids logoLAWGRIDS.ORG

Annexure IV K, Central Motor Vehicles (2nd Amendment) Rules, 2009.: ANNEXURE - IV K

Central Motor Vehicles (2nd Amendment) Rules, 2009. - Annexure IV K

Text of annexure IV K

ANNEXURE - IV K

ANNEXURE - IV K [See rule 115(15)] Technical Specification of the Reference Fuel to be used for testing vehicles equipped with Olesel engines. Parameter Unit Limits 11i Test method Minimum Maximum Cetane number 1?1 52.0 54.0 EN-ISO 5165 Densltv at 15 dearees c ka/ml 833 837 EN-ISO 3675 Olstlllation : -50% Mint dearee C 245 - EN-ISO 3405 - 95% oolnt deoree C 345 350 EN-ISO 3405 - final bollill<l oolnt decree C - 370 EN-ISO 3405 Rash oolnt decree C 55 - EN 22719 CFPP decree C - -5 EN 116 Vlscositv at 40 decrees C mm2/s 2.3 3.3 EN-ISO 3104 Polycyclicaromatic %m/m 3.0 6.0 IP 391 hvdrocarbons Sulohur content <3> lllQ/ko - 10 ASTM D 5453 C'.nnner corrosion . . Oass 1 EN-ISO 2160 Conradson carbon residue %m/m . 0.2 EN-ISO 10370 (10% DR) Ash content %m/m . 0.01 EN-ISO 6245 Water content %m/m . 0.02 EN-ISO 12937 Neutralisation (strong add) mg KOH/g . 0.02 ASTM D 974 number Oxidation stabilitv l4) ma/ml - 0.025 EN-ISO 12205 Lubricity (HFRRwear scan Micrometer . 400 CEC F-06-A-96 diameter at 60 decrees C) um FAME Prohibited 1"1) The values quoted in the specificationsare "true values". In establishment of their limit values the terms of ISO 4259 Petroleum products- Determination and application of precision data In relation to methods of test have been applied and in fixing a minimum value, a minimum difference of 2R above zero has been taken into account; in fixing a maximum and minimum value, the minimum difference is 4R (R=reproducioility).Notwithstanding this measure, which is necessary for technical reasons, the manufacturer of fuels should nevertheless aim at a zero value where the stipulated maximum value is 2R and at the mean value in the case of quotations of maximum and minimum limits. Should it be necessary to darify the questions as to whether a fuel meets the requirements of the specifications, the terms of ISO 4259 should (2) be applied. The range for cetane number is not in accordance with the requirements of a minimum range of 4R. However, in the case of a dispute between fuel supplier and fuel user, the terms of ISO 4259 may be used to resolve such disputes provided repllcate measurements, of sufficient number to archive the necessary precision, are made in preference to single determinations. (3) The actual sulphur content of the fuel used for the Type I test shall be reported (?) Even though oxidation stability is controlled, it is likely that shelf life will be limited. Advice should be souqht from the suoolier as to storaoe conditions and life. 46 TIIEGAZETIE OF INDIA: EXTRAORDINARY [PARTII-SEC. J(i)] ANNt:XUt<t: - 'IV L [See rule 115(15)] Specification of reference fuel for CNG CNGReference fuel for CategoryM and Category N Vehlcies not exceeding 3.soo Kas GYWand Twoand Ibc:e:Wbeelecs LimitsOlaractertstlc Units Basis minimum maximum Test methodRefeNnce fuel G .... Com : Methane %mole 100 99 100 ISO 6974Balar"? 11' -%mole - - 1 ISO 6974N, %mole ISO 6974Sulot,l.:( v0ntent ma/m3ci, - - 10 TSO 6326-5Wobbe Ir""dX <net) MJ/ml<JJ 48.2 47.2 49.2 I ?iiCe fuel G,. - - .. Methane % mole . 86 84 88 ISO 6974Balant'.r!(1) %mole - - 1 ISO 6974? %mole 14 12 16 ISO 6974Sulohur content ma/mJ1'' - - 10 ISO 6326-5Wobbe Index <netl MJ/mJ <J> 39.4 38.2 40.6(1) Inerts (different from N2)+ C2+ C2+• (2) Value to be determined at 293, 2 I<(20° C) and 101.3 kPa. (3) Value to be determined at 273.2 K (0° C) and 101.3 kPa. The above type rl vehldes should be tested with both types of Refel'Plll"P Ftiels CNGReference fuel for Yehldes above 3.soo Kas GVW I Limits Charactertstic Units Basis .Minimum Maximum Test methodReference fuel G. , : Methane 87 84 89 Ethane 13 11 15 . Balance <1> %- mole - - 1 ISO 6974Su1Dhur content ma/m31z' - - 10 ISO 6326-5(1) Inerts + C2+ <2) Value to be determined at standard conditions (293.2 K (20°C) and 101.3 kPa). Limits Characterfstic Units Basis Minimum Maximum Test methodReference fuel G,? . . ·- . Methane 92.5 91.5 93.5 Balance u> %- mole - - 1 ISO 6974N, 7.5 6.5 8.5Sulohur content malmJ1z, - - 10 ISO 6326-5(1) Inerts (different form N2i+C2+C2+. f2l Value to be determined at standard conditions (293.2 K (20°Cl and 101.3 kPal. • ••

Previous and next

All provisions of Central Motor Vehicles (2nd Amendment) Rules, 2009.

Questions people ask

Is annexure IV K of Central Motor Vehicles (2nd Amendment) Rules, 2009. still in force?

No repeal of Central Motor Vehicles (2nd Amendment) Rules, 2009. is recorded.