Form LE-10, The Explosives Rules, 2008: Form LE-10
The Explosives Rules, 2008 - Form LE-10
Text of form LE-10
Form LE-10
Form LE-10
Shot Firer’s Certificate
(See article 10 of Part 1 of Schedule IV)
[See rule 107(5) of the Explosives Rules, 2008]
(Certificate of competency to carry out blasting of explosives in area not coming under the Mines Act, 1952)
No. ..............................
This is to certify that ......................................................................................................................
(name)
born on .......................................resident of .............................................................................................
(date of birth) (address)
…………………. ................................../passed the...................................................................................
(date) (name of examination)
held on ................................ by...................................................................................................................
(date) (authority conducting examination)
and is authorised to conduct blasting operations as mentioned below using explosives in areas other than mines coming
under the purview of the Mines Act 1952, subject to the provisions of the Explosives Act, 1884 and the rules framed there
under.
Authorised class, category and type of blasting ………………………………………...................
[See explanation to sub-rule (5) of rule 107]
This certificate shall remain valid till .............................................(five years from the date of issue)
This certificate is liable to be suspended or revoked for any violation of the Act or rules framed there under or the conditions
of this certificate or if there is any discrepancy or deviation in the information or suppression of facts furnished by the
applicant in his application form.
Place : ...................... [Controller of Explosives]
Date : .......................
Statutory Warning: Mishandling and misuse of explosives shall constitute serious criminal offence under the law.
................................................................................................
Endorsement for revalidation
................................................................................................
Conditions
(1) All local laws and regulations applicable for obtaining, owning, transporting, storing, handling and using
explosive materials shall be followed.
(2) Explosive materials shall be protected form unauthorised possession and shall not be abandoned.
(3) Explosive materials shall be used only by experienced persons who are familiar with the hazards involved and who
hold all required permits.
(4) Loading and firing shall be performed or supervised only by a person possessing an appropriate shot firer
certificate and permit to blast.
(5) Trainees helpers and other persons who do not hold the required shot firer certificate or permits shall work only
under the supervision of persons holding such permits.
(6) No explosive materials shall be located or stored where they may be exposed to flame excessive heat sparks or
impact.
(7) No smoking shall be permitted within 15 metre of any location where explosive are being handled or used.
(8) No person with in 15 metres of any location where explosive are being handled or used shall carry any matches
open light or other fire or flame. However, suitable devices for lighting safety fuse are exempted form this requirement.
(9) No person under the influence of intoxicating liquors narcotics or other dangerous drugs shall be allowed to
handle explosive materials.
Space for
photograph
of the Shot
Firer’s with
signature
264 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(10) Explosive materials shall be kept in close approved containers or packages while being transported between the
storage magazine and the blasting site.
(11) A holder of a shot firer certificate and Permit to Blast shall keep a daily record of all explosive materials received and
fired or otherwise disposed of by the permit holder. Such records shall be retained for five years.
(12) The shot firer and the employee shall be conversant with procedure to be taken during the emergency.
(13) The holder of the shot firer certificate shall comply with all or any of the directions as may be given by the
Controller from time to time in the interest of safety.
(14) Accidents by fire or explosion and losses, shortage or theft of explosives shall be immediately reported to the
nearest police station and the Controller of Explosives having jurisdiction over the area.
[Controller of Explosives]
..............................
Form LE—11
Foreman’s Certificate
(See article 11 of Part 1 of Schedule IV)
[See rule 107(6) of the Explosives Rules, 2008]
(Certificate of competency to supervise manufacture of fireworks or safety fuse)
No. ..............................
This is to certify that ........................................................................................................................
(name)
born on .......................................resident of ....................................................................................
(date of birth) (address)
…………………. ................................../passed the..........................................................................
(date) (name of examination)
held on ................................ by......................................................................
(date) (authority conducting examination)
and is authorised to supervise manufacture of ------------------- in a factory licensed under Explosives Rules, 2008
This certificate shall remain valid till ............................................(five years from the date of issue) This certificate is liable to
be suspended or revoked for any violation of the Act or rules framed there under or the conditions of this certificate or if
there is any discrepancy or deviation in the information furnished by the applicant in his application form.
Place : ...................... [Controller of Explosives]
Date : .......................
Statutory Warning: Mishandling and misuse of explosives shall constitute serious criminal offence under the law.
..............................................................................................................................................................
Endorsement for revalidation
..............................................................................................................................................................
Conditions
(1) All local laws and regulations applicable for manufacture of explosives shall be followed.
(2) No person under the influence of intoxicating liquors narcotics or other dangerous drugs shall be allowed to
handle explosive materials.
(3) The holder of the this certificate shall comply with all or any of the directions as may be given by the Controller
from time to time in the interest of safety.
(4) Accidents by fire or explosion and losses, shortage or theft of explosives shall be immediately reported to licensee,
the nearest police station and the Controller of Explosive having jurisdiction over the area.
[Controller of Explosives]
Space for
photograph
of the Foreman
with signature
[Öæ» II—¹‡ÇU 3(i)]p ÖæÚUÌ ·¤æ ÚUæÁ¹̃ æ Ñ ¥âæÏæÚU‡æ 265
Part 4
(Conditions of Various Licences)
SET-I
The Following are the conditions of licence number ………. to manufacture fireworks or gunpowder, or both, not
exceeding 15 kilogrammes at any one time in Form LE-1 [article 1(a)] granted by District Magistrate
(1) The maximum quantity of explosives in the whole factory at any one time, including those in process of manufacture
as well as those stored in the licensed premises, shall not exceed as mentioned in item 4 in from LE-1.
(2) All explosives in the premises shall be manufactured and kept in a building substantially constructed of brick,
stone or concrete or in a securely constructed fireproof safe and shall be separated from any dwelling house,
highway, street, public thoroughfare building or public place or another licensed premises by the safe distances
as mentioned in the licence and its enclosures.
(3) No explosive other than specified in the licence in form LE-1 shall be kept in the premises
(4) The fireworks/gunpowder shall be manufactured in single storied building and all doors of the building shall open
outwards.
(5) The interior of every building and receptacle used for explosives and the shelves and fittings therein shall be so
constructed or so lined and covered as to prevent the exposure of any iron or steel, or the detaching of any grit,
iron steel or similar substance, in such manner as to come into contact with the explosives. Such interior, shelves
and fittings shall, so far as reasonably practicable, be kept free from grit and otherwise clean.
(6) The building or receptacle in which explosive is kept shall be used only for the keeping of such explosive and for
no other purpose whatsoever.
(7) Fireworks shall be kept in separate receptacles or shall be so separated as to prevent explosion or fire communicating
from one to the other.
(8) All explosives exceeding 0.5 kilogramme in amount shall be packed and marked in accordance with the Schedule II
of the Explosives Rules 2008.
(9) The explosive shall be manufactured in rooms of lightly constructed one-storied building kept and used only for
the purpose of such manufacture and separated from the storage place by a distance of 45metres and separated
from any dwelling house, other building, another licensed premises, highway, street, public thoroughfare or public
place by a distance of 45 metres.
The facilities of the factory shall maintain the following inter-distances in metres :
From shed or To ingredient store, To manufacturing To drying To magazine
room road, dwelling house sheed platform
and place of public
assembly
Ingredient Shed — 45 45 45
Manufacturing Shed 45 10 10 45
Drying platform 45 10 10 45
Magazine 45 45 45 more than one
magazine not
permitted
(10) The ingredients for the manufacture of gunpowder shall be kept in separate stores distinct from each other and
separated by a distance of at least 45 meters from the place where gunpowder/fireworks is manufactured or stored
as per above table.
(11) Not more than four persons shall be allowed at any one time in any one building or tent in which the explosive is
being manufactured and only persons actually employed in manufacturing or superintending manufacture shall
be allowed inside the place of manufacture.
(12) No iron or steel implements or stone implements, such as mortars, pestles, grinders (chukkis) shall be used in the
manufacture of explosives or shall be kept at any time in the licensed premises.. Only copper, gun metal or wooden
tools are permissible.
266 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(13) All explosives, as and when they are manufactured, shall be removed, without delay to the licensed place of
storage and no explosive shall be allowed to accumulate in the place of manufacture.
(14) Manufacture shall only be carried on between sunrise and sunset and no smoking or lights shall be allowed in or
near the place where explosives are being manufactured.
(15) No oils, paints, matches, lights, any article of a highly inflammable or explosive nature or liable to cause fire or
explosion or any acids or similar substances shall be brought or kept in the licensed premises. No smoking shall be
allowed inside the factory.
(16) The licensee shall keep records and accounts of all explosives manufactured and of all stocks in hand in forms
RE-2 and RE-4 and exhibit the stock books and records to the officers authorised under Explosives Rules, 2008,
whenever such officer may call upon him to do so.
(17) No activity other than those specified in licence shall be carried out in the factory premises.
(18) The licensee and the employee shall be conversant with procedure to be observed during the emergency within
the premises.
(19) Free access to the licensed premises shall be given at all reasonable times to any inspecting or sampling officer and
every facility shall be afforded to the officer for ascertaining that the provisions of the Act and the Rules and the
safety conditions are duly observed.
(20) If the licensing authority informs in writing, the holder of the licence to execute any repairs or to make any
additions or alterations to the licensed premises or machinery, tools or apparatus or carry out recommendations,
which are in the opinion of such authority may pose unacceptable risk and so necessary for the safety of either
on-site or off-site of the premises/persons, the holder of the license shall execute the recommendations and report
compliance within the period specified by such authority.
(21) Accidents by fire or explosion and losses, shortage or theft of explosives shall be immediately reported to the
nearest police station and the licensing authority and local office of the licensing authority.
(22) No person under 18 years of age and no person who is in a state of intoxication or of unsound mind or physically
handicapped shall be employed in or allowed to enter the factory.
(23) No electronic appliances or instruments like mobile phones, pagers shall be allowed in or near the premises where
explosives are manufactured handled, stored and used.
(24) The date of manufacture shall be marked in conspicuous indelible character, by means of stamping or printing on
the label/outer package of the sound producing cracker.
(25) No chlorate shall be used in the manufacture of fireworks.
(26) The manufacture or sale of fire-crackers generating noise level exceeding;
(a) 125 dB(AI) or 145 dB(C)pk at 4 meters distance from the point of bursting shall be prohibited
(b) For individual fire-cracker constituting the series (joined fire-crackers), the above mentioned limit be reduced
by 5 log10 (N) dB, where N = number of crackers joined together
Signature, Designation and seal of licensing authority
SET - II
The Following are the conditions of licence number ………. to manufacture fireworks in Form LE-1 [articles 1(b) and
(c)] granted by the Chief Controller or Controller of Explosives.
CONDITIONS
General :
(1) All explosives in the premises shall be manufactured and kept in a building substantially constructed of
brick, stone or concrete as per specification No. 3 under Schedule-VII or in a securely constructed fireproof safe or of a
type and design approved by the Chief Controller of Explosives.
(2) The interior of every building and receptacle used for explosives and the shelves and fittings therein shall be
so constructed or so lined and covered as to prevent the exposure of any iron or steel, or the detaching of any grit, iron steel
or similar substance, in such manner as to come into contact with the explosive. Such interior, shelves and fittings shall, so
far as reasonably practicable, be kept free from grit and otherwise clean.
[Öæ» II—¹‡ÇU 3(i)]p ÖæÚUÌ ·¤æ ÚUæÁ¹̃ æ Ñ ¥âæÏæÚU‡æ 267
(3) The building or receptacle in which explosive is kept shall be used only for keeping of such explosive and for no
other purpose whatsoever.
(4) Fireworks shall be kept in separate receptacles or shall be so separated as to prevent explosion or fire communicating
from one to the other.
(5) All explosives exceeding 0.5 kilogramme in amount shall be packed and marked in accordance with the Schedule II.
(6) The ingredients for the manufacture of fireworks, serpents, paper caps, safety fuse/micro cord fuse or sparklers
shall be kept in separate stores distinct from each other and separated by safety distances as mentioned in the
table 4 or 6 of Schedule VIII.
(7) No iron or steel implements or stone implements, such as mortars, pestles, grinders (chukkis) shall be used in the
manufacture of explosives or shall be kept at any time in the licensed premises. Only copper, gun metal or wooden
tools are permissible.
(8) All explosives, as and when they are manufactured, shall be removed, without delay to the licensed place of
storage and no explosive shall be allowed to accumulate in the place of manufacture.
(9) Manufacture shall only be carried in between sunrise and sunset and no lights shall be allowed in or near the place
where fireworks are manufactured provided that nothing in this rule shall apply to handling/manufacture of
fireworks during dark hours if proper illumination with flame and/or dust proof motors, light and fittings is
provided in the area and the place is guarded.
(10) No oils, paints, matches, lights, any article of a highly inflammable or explosive nature or liable to cause fire or
explosion or any acids or similar substances shall be brought or kept in the licensed premises. No smoking shall be
allowed inside the factory.
(11) The licensee shall keep records and accounts of all explosives manufactured and of all stocks in hand in forms
RE-2 and RE-4 and exhibit the stock books and records to the officers authorised under rule 128 of the Explosives
Rules, 2008, whenever such officer may call upon him to do so.
(12) No activity other than those specified in licence shall be carried out in the factory premises.
(13) The licensee and the employee shall be conversant with procedure to be observed during the emergency within
the premises.
(14) Free access to the licensed premises shall be given at all reasonable times to any inspecting or sampling officer and
every facility shall be afforded to the officer for ascertaining that the provisions of the Act and the Rules and the
safety conditions are duly observed.
(15) If the licensing authority or a Controller of Explosives informs in writing, the holder of the licence to execute any
repairs or to make any additions or alterations to the licensed premises or machinery, tools or apparatus or carry
out recommendations, which in the opinion of such authority may pose unacceptable risk and so necessary for the
safety of either on-site or off-site of the premises or persons, the holder of the license shall execute the
recommendations and report compliance within the period specified by such authority.
(16) Accidents by fire or explosion and losses, shortage or theft of explosives shall be immediately reported to the
nearest police station and the licensing authority and local office of the licensing authority.
(17) The maximum number of process buildings excluding mixing/filling, transit building and drying platform in a
factory shall not exceed 85.
(18) Unless specifically exempted by the Chief Controller of Explosives, the minimum capacity for store house attached
to any factory shall be 1/5th of its annual manufacturing capacity.
(19) Licensee shall appoint minimum one qualified foreman certified by the Controller of Explosives, for every 20
process buildings to supervise the manufacture of fireworks.
(20) Every process building where electrically operated machinery is used in the manufacture of explosives shall have
attached thereto one or more efficient lighting conductors designed and erected in accordance with the specification
laid down in Indian Standard Specification No.2309 as amended from time to time.
(21) No electronic appliances or instruments like mobile phones, pagers shall be allowed in or near the premises where
explosives are manufactured, handled, stored and used.
(22) No person under 18 years of age and no person who is in a state of intoxication or of unsound mind or physically
handicapped shall be employed in or allowed to enter the factory.
268 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(23) The doors of any process building shall not face each other. If doors of adjoining sheds face each other, a screen
wall of 23 cm cement and brick should be provided at a distance of 1 to 2 M from the building and 0.5 m wider than
the door opening on both sides and up to the height of the doors.
(24) The maximum quantity of explosives in the whole factory at any one time, including those in process of manufacture
as well as those stored on the licensed premises, shall not exceed as mentioned in item 4 in from LE-1.
Special conditions for fireworks
(25) The Mixing /filling building shall be surrounded by a blast wall as per specification no. 3 under Schedule-VII.
(26) Manufacturing building , mixing, filling, transit building and drying platform shall observe inner safety distance to
and from any process building and an outer safety distance from the fence as per table 6 of Schedule VIII.
(27) The total quantity of explosives and person/persons in any manufacturing building, mixing, filling, transit building
and drying platform shall be as per table 6 of Schedule VIII.
(28) The licensed premises shall be surrounded by a wall or barbed wire fencing at least 2 meters high of such strength
and construction as to prevent entry of unauthorised persons at safe distance as mentioned in the table 6 of
schedule VIII.
(29) One drying platform shall be provided for every five manufacturing sheds (excluding filling/mixing/transit building).
(30) Black powder and fireworks shall not be kept in the same receptacle and shall be so separated as to prevent
explosion or fire communicating from one to the other.
(31) No chlorate shall be used in the manufacture of fireworks.
(32) No loose fireworks composition, dry or wet, shall be allowed to be kept in the factory at the close of any single
working day. All such compositions that remain at the close of the day shall be destroyed..
(33) The fireworks shall be manufactured in single storied building and all doors of the building shall open outwards :
Provided that nothing in this condition shall apply to manufacture of explosives with aid of electrically operated
machinery and such process of manufacture and machinery approved by Licensing Authority
(34) Every process building shall have required number of doors as approved by Licensing Authority
(35) The safety distance is required to be kept clear between any licensed factory building, magazine or store house,
public road and protected works as per Table-6 of Schedule VIII
(36) The date of manufacture shall be marked in conspicuous indelible character, by means of stamping or printing on
the label/outer package of the sound producing cracker
(37) The manufacture or sale of fire-crackers generating noise level exceeding;
(a) 125 dB(AI) or 145 dB(C)pk at 4 meters distance from the point of bursting shall be prohibited
(b) For individual fire-cracker constituting the series (joined fire-crackers), the above mentioned limit be reduced
by 5 log
10
(N) dB, where N = number of crackers joined together
Special conditions for paper caps or amorces
(38) The composition of dots in the amerces or paper caps shall be a mixture of potassium chlorate, amorphous-
phosphorus, starch and calcium carbonate with or without the addition of sulphur (free from acid), provided that
amount of amorphous-phosphorus, present in the mixture shall not exceed the proportion of 0.65 grams, in 1000
dots.
(39) The composition used in the amerces or paper caps shall be in a proportion not exceeding 4.54 mgs. to every 1000
dots, i.e. no one dot shall individually contain more than 0.0045 gram. of the composition. If the amerces or paper
caps be manufactured in the form of a tape, it shall not have more than 30 dots for one tape.
(40) Not more than one kilogram of explosives composition required for the manufacture of amerces or paper caps shall
be prepared at a time.
(41) The ingredients shall be kept separately until mixed wet in a mixing vat, which shall not have any exposed iron.
(42) Potassium chlorate shall be kept in a separate store room distinct from other ingredients.
(43) Sulphur shall be kept in a separate store room distinct from other ingredients.
(44) Licence under Arms Rule, 1962 shall be obtained for storage of sulphur and chlorate.
[Öæ» II—¹‡ÇU 3(i)]p ÖæÚUÌ ·¤æ ÚUæÁ¹̃ æ Ñ ¥âæÏæÚU‡æ 269
(45) Amorces shall be packed in approved closed boxes of cardboard of not less than .33 mm thickness. The boxes shall
be of round shape and not less than 25 mm in dia and 20 mm in height and shall contain not more than 50 amorces
in each. A round corrugated cardboard sheet shall be placed in each box before amorces are packed in it. (If,
however, not more than 30 amorces are packed in a cardboard box, such sheet need not be placed in each box). The
round cardboard boxes shall then be bunched and rolled in a paper wrapper forming 10's packets, and ten such 10's
packets shall be packed in a strong cardboard box making the 100's package. Such 100's boxes not exceeding 80 in
number shall finally be packed in approved strong wooden cases bound with hoop iron or corrugated boxes of a
type and structure approved by Chief Controller of Explosives.
(46) Net weight of paper caps containing 80 units shall not exceeds 2.8 kilogrammes.
(47) The over pasting building may be an extension of first stage drying building through window in amorces factory.
(48) The Second stage drying shed shall be constructed of a type and design approved by the Chief Controller of
Explosives.
(49) The dipped amorces sheets shall be dried inside second stage drying building by placing them in singles without
lying on each other.
(50) The gum used for over pasting of amorces sheet shall not contain copper sulphate or a chemical acidic in nature.
(51) Manufacturing building , mixing, filling , transit building and drying platform shall observe inner safety distance to
and from any process building and an outer safety distance from the fence as per Table 6 of Schedule VIII.
(52) The licensed premises shall be surrounded by a wall or barbed wire fencing at least 2 meters high of such strength
and construction as to prevent entry of unauthorised persons at safe distance as mentioned in the Table 6 of
schedule VIII.
(53) The manufacture or sale of fire-crackers generating noise level exceeding;
(a) 125 dB(AI) or 145 dB(C)
pk
at 4 meters distance from the point of bursting shall be prohibited.
(b) For individual fire-cracker constituting the series (joined fire-crackers), the above mentioned limit be reduced
by 5 log
10
(N) dB, where N = number of crackers joined together.
Special Conditions for Saparklers
(54) Manufacturing building, mixing, filling , transit building and drying platform shall observe inner safety distance to
and from any process building and an outer safety distance from the fence as per Table 4 of Schedule VIII.
(55) The sparklers shall be manufactured in one storied building and all doors of the building shall open outwards.
(56) Every process building expect transit building shall have four doors.
(57) Mixing building shall be constructed as per specification no. 3 under schedule VII.
(58) Manufacturing (packing) building/transit shed shall be constructed as per specification no. 3 under schedule VII.
(59) Drying space shall of hard smooth surface without rising from the ground level.
(60) The doors of different buildings shall not face each other.
(61) The steel filings or iron borings or magnesium metal should be coated with linseed oil or paraffin wax or pitch
before mixing along with other chemical in wet condition.
(62) The wires of sparklers shall be G.I. wire or shall be coated with copper.
(63) The wires of sparklers shall not be dipped with any other material except with the mixture of chemical approved by
the Chief Controller.
(64) The total quantity of explosives and person/persons in any manufacturing (packing) building, mixing, dipping
shed transit building and drying platform shall be as per Table 4 of Schedule VIII.
(65) A transit building shall be provided for storing semi finished or unpacked sparklers at end of day.
(66) No chlorate shall be used in the manufacture of fireworks.
(67) Manufacturing (packing) building, mixing, dipping, transit building and drying space shall observe inner safety
distance to and from any process building and an outer safety distance from the fence, as per Table 4 of
Schedule VIII.
(68) The total quantity of explosives and person/persons in any manufacturing building, mixing, transit building and
drying space shall be as per Table 4 of Schedule VIII.
270 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(69) The licensed premises shall be surrounded by a wall or barbed wire fencing at least 2 meters high of such strength
and construction as to prevent entry of unauthorised persons at safe distance as mentioned in the Table 4 of
Schedule VIII.
Special Conditions for Serpent Eggs
(70) All the process building shall be of a type and design approved by the Chief Controller of Explosives.
(71) Nitration - Nitration of bitumen shall be done in room having acid proof tiles or brick floor with efficient ventilation
system to disperse acid fumes or a building of a type and design approved by the Chief Controller of Explosives.
(72) Washing-Nitrated bitumen shall be washed thoroughly by water to remove the trace of acid before taking to
drying platform or grinding or mixing building.
(73) The floor of washing building shall be made of acid proof tiles or bricks with sufficient water drainage system.
(74) Every person employed in Nitration and wash building shall use goggles, acid proof gloves and apron.
(75) Utensil used in Nitration shall be made of acid proof material.
(76) The mixture of chemical shall be moist, before making pellet or tablet to prevent fire due to friction.
(77) The pellets or tablets shall be packed in a cardboard box along with cushioning material to prevent the breakage
of pellets or tablets if packaging is done by hand.
(78) No chlorate shall be used in the manufacture of fireworks.
(79) Manufacturing building , mixing, filling , transit building and drying platform shall observe inner safety distance to
and from any process building and an outer safety distance from the fence as per Table 6 of Schedule VIII.
(80) The licensed premises shall be surrounded by a wall or barbed wire fencing at least 2 meters high of such strength
and construction as to prevent entry of unauthorised persons at safe distance as mentioned in the Table 6 of
Schedule VIII.
Signature, Designation and seal of Licensing Authority
SET-III
The following are the conditions of licence number ………. for manufacture of ANFO explosives in Form LE-1 [article
1(d)] granted by Chief Controller or Controller of Explosives. —
CONDITIONS
(1) The quantity of ANFO explosives in the premises or any part thereof shall not exceed at any one time the quantity
for which licence has been issued.
(2) The ANFO manufacturing shed shall be protected by a fencing at a distance of 15 metres and it shall maintain
safety distance from protected works as specified in Table 1 of Schedule VIII.
(3) Work in the shed shall be carried out strictly in accordance with the laid down safe working procedures and
instructions.
(4) The ANFO explosives shall be manufactured under the immediate supervision of a qualified responsible person
appointed by the licensee.
(5) The licensee and every person employed shall take all due precautions for the prevention of accidents by fire or
explosion in the place or places where the ANFO explosives is manufactured, handled or used.
(6) All spillage of ANFO explosive shall be collected and destroyed at a safe place away from the licensed premises
under the supervision of experienced person.
(7) All containers and mixers used for manufacturing the ANFO explosive shall after use, be thoroughly cleaned with
suitable detergent solution and washed with water.
(8) The licensee and the employee shall be conversant with procedure to be taken during the emergency within the
premises.
(9) Free access to the licensed premises shall be given at all reasonable times to any inspecting or sampling officer and
every facility shall be afforded to the officer for ascertaining that the provisions of the Act and these rules and the
safety conditions are duly observed.
[Öæ» II—¹‡ÇU 3(i)]p ÖæÚUÌ ·¤æ ÚUæÁ¹̃ æ Ñ ¥âæÏæÚU‡æ 271
(10) If the licensing authority or a Controller of Explosives informs in writing, the holder of the licence to execute any
repairs or to make any additions or alterations to the licensed premises or machinery, tools or apparatus or carry
out recommendations, which are in the opinion of such authority may pose unacceptable risk and so necessary for
the safety of either on-site or off-site of the premises or persons, the holder of the license shall execute the
recommendations and report compliance within the period specified by such authority.
(11) Accidents by fire or explosion and losses, shortage or theft of explosives shall be immediately reported to the
nearest police station and the licensing authority and local office of the licensing authority.
Signature, Designation and seal of Licensing Authority
SET - IV
The following are the conditions of licence number ………. for manufacture of Liquid Oxygen Explosives (LOX) in Form
LE-1 [Article 1(e)] granted by Chief Controller or Controller of Explosives. —
CONDITIONS
(1) The quantity of Liquid Oxygen Explosives (LOX) on the premises or any part thereof shall not exceed at any one
time the quantity for which licence has been issued.
(2) Soaking of Liquid Oxygen Explosives (LOX) cartridges shall be done in a secured location within a fenced area
maintaining safety distance from protected works as specified in table 1 of Schedule VIII.
(3) Work shall be carried out strictly in accordance with the laid down safe working procedures and instructions.
(4) The Liquid Oxygen Explosives (LOX) shall be manufactured under the immediate supervision of a qualified
responsible person appointed in writing by the licensee.
(5) The licensee and every person employed shall take all due precautions for the prevention of accidents by fire or
explosion in the place or places where the Liquid Oxygen Explosives is manufactured, handled or used.
(6) The licensee and the employee shall be conversant with procedure to be taken during the emergency within the
premises.
(7) Free access to the licensed premises shall be given at all reasonable times to any inspecting or sampling officer and
every facility shall be afforded to the officer for ascertaining that the provisions of the Act and these rules and the
safety conditions are duly observed.
(8) If the licensing authority or a Controller2 of Explosives informs in writing, the holder of the licence to execute any
repairs or to make any additions or alterations to the licensed premises or machinery, tools or apparatus or carry
out recommendations, which are in the opinion of such authority may pose unacceptable risk and so necessary for
the safety of either on-site or off-site of the premises/persons, the holder of the license shall execute the
recommendations and report compliance within the period specified by such authority.
(9) Accidents by fire or explosion and losses, shortage or theft of explosives shall be immediately reported to the
nearest police station and the licensing authority and local office of the licensing authority.
Signature, Designation and seal of Licensing Authority
SET - V
The following are the conditions of licence number ………. for Site Mixed Explosives (SME) plant in Form LE-1 [Article
1(f)] granted by Chief Controller or Controller of Explosives. -
CONDITIONS
(1) Only SME permitted in writing by the Chief Controller of Explosives shall be manufactured in the Bulk Mixing and
Delivery (BMD) Vehicle.
(2) The SME shall be manufactured in the BMD vehicle only within the mining area
of__________________________________after obtaining necessary clearance from Director General of Mines
Safety under Mines Act in force and the SME so manufactured shall not be used except under and in accordance
with such conditions as may be imposed by the Director General of Mines Safety.
(3) The SME shall be manufactured strictly in accordance with the laid down safe working procedures and related
instructions.
(4) All due precautions shall be taken in the Support-Plant to prevent any mixing of solutions or ingredients which
may form explosives.
272 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(5) At least two fire extinguishers of suitable size and capable of fighting electrical and petroleum fires shall be
provided in each vehicle in an easily accessible position. During the process of manufacture, they must be kept
in a state of readiness.
(6) The manufacture of SME shall be carried out by or under the immediate supervision of a experienced person
appointed in writing for the purpose by the licensee. This supervisor and the operators shall be conversant with
the operation of the vehicle and the facilities mounted thereon. The supervisor shall be familiar with the general
procedure for handling emergency situations and the requirements of these rules and the conditions of this
licence.
(7) During mixing and loading, a positive grounding device and a semi-conductive hose shall be used to prevent
accumulation of static electricity. The supervisor shall evaluate all system to ensure that they will adequately
dissipitate static electricity under potential field conditions.
(8) The flexible hoses used to deliver explosives directly in the boreholes shall be electrically and mechanically
continuous. The hoses shall be periodically tested by water at the prescribed pressure and also tested for
electrical continuity periodically.
(9) The manufacture of SME shall be carried out only between sunrise and sunset.
(10) The SME manufactured in the vehicle shall be charged into the bore holes immediately on its manufacture and at
the end of charging operation, the entire system including hose pipes should be emptied of explosives by
evacuating with compressed air flushing with water. At the end of the loading operations for the day, the entire
system of the vehicle including hose pipes shall be completely cleaned and thereafter the vehicle shall be parked
at the support plant.
(11) All spillages of explosives shall be collected and destroyed at a safe place and the effluents shall be discharged
after proper treatment.
(12) The licensee shall keep records and accounts of all explosives manufactured in form RE-2 and shall exhibit his
books and records to any of the officers authorised under these rules whenever such officer may call upon him to
do so.
(13) All boosters, detonators and detonating fuses required in connection with the work of blasting, shall be kept in a
magazine, licensed under the Explosive Rules, 2008.
(14) All due precautions for blasting of charged holes shall be taken as per Indian Mines Act, 1952 (35 of 1952).
(15) The licensee and the shot firer shall be responsible for preparation of charges, the charging of holes, and the firing
of shots and shall take all precautions against fire and accident involving the explosives.
(16) The licensee and the employee shall be conversant with the procedure to be taken during an emergency.
(17) Free access to the licensed premises shall be given at all reasonable times to any inspecting or sampling officer and
every facility shall be afforded to the officer for ascertaining that the provisions of the Act and these rules and the
safety conditions are duly observed.
(18) If the licensing authority or a Controller of Explosives informs in writing, the holder of the licence to execute any
repairs or to make any additions or alterations to the licensed premises or machinery, tools or apparatus or carry
out recommendations, which are in the opinion of such authority may pose unacceptable risk and so necessary for
the safety of either on-site or off-site of the premises or persons, the holder of the licence shall execute the
recommendations and report compliance within the period specified by such authority.
(19) Accidents by fire or explosion and losses, shortage or theft of explosives shall be immediately reported to the
nearest police station and the licensing authority and local office of the licensing authority.
Signature, Designation and seal of licensing authority
SET - VI
The following are the conditions of licence number ………. to manufacture explosives other than fireworks, gunpowder,
ANFO, Liquid Oxygen Explosives and Site Mixed Explosives in Form LE-1 [article 1(g)] granted by Chief Controller or
Controller of Explosives.
CONDITIONS
(1) The quantity of explosives on the premises or any part thereof shall not exceed at any one time the quantity for
which licence has been issued.
[Öæ» II—¹‡ÇU 3(i)]p ÖæÚUÌ ·¤æ ÚUæÁ¹̃ æ Ñ ¥âæÏæÚU‡æ 273
(2) The process and storage sheds or buildings shall maintain safety distances as specified in Schedule VIII.
(3) Work in each building or shed shall be carried out strictly in accordance with the laid down safe working
procedures and instructions.
(4) The licensee and every person employed in or about the factory shall take all due precautions for the prevention
of accidents by fire or explosion in the factory and for preventing unauthorised person from having access to the
factory or to the explosives therein and shall abstain from any act whatsoever which tends to cause fire or
explosion and is not reasonably necessary for the purposes of work in the factory. Due provisions shall be made,
by the use of suitable working clothes, suitable shoes etc. as not to cause any danger of fire or explosion.
(5) No additions and alterations shall be carried out in the licensed premises without a previous sanction in writing
of the licensing authority. Such additions and alterations so sanctioned shall be shown in the amended plan
attached to the licence.
(6) The interior of the compartments of the building in which explosives are manufactured or handled and the
machinery or fittings therein shall be thoroughly cleaned at the end of day’s work. Sweepings from the compartments
of the building in which explosives are manufactured or handled shall be carefully collected and disposed as per
laid down procedure. The effluent shall be discharged only after proper treatment as per laid down procedure.
(7) The licensee shall appoint a qualified and competent person to supervise the manufacture of explosives and other
process and to conduct the operations in accordance with these rules.
(8) The licensee, occupier, the safety officer and the qualified and competent persons shall undergo and also organise
safety workshops and training programmes regularly for safety awareness and for knowledge for their own as well
as their sub-ordinates and shall record the same.
(9) All employees (full time, part time or contract basis) shall be conversant with the emergency response plan for
disaster management of the factory.
(10) All unsafe incidents (including the minor one) shall be recorded (preferably stating the near-misses and also
critical situations) and shall be reviewed periodically by the licensee and the competent person as a learning
process disseminate the lesson(s) learnt, to all the people working in the premises.
(11) Free access to the licensed premises shall be given at all reasonable times to any inspecting or sampling officer and
all facilities shall be offered to the officer for ascertaining that the provisions of the Act and these rules and the
safety conditions are duly observed.
(12) If the licensing authority or the Controller of Explosives informs in writing, the holder of the licence to execute any
repairs or to make any additions or alterations to the licensed premises or machinery, tools or apparatus or carry
out recommendations, which are in the opinion of such authority may pose unacceptable risk and therefore the
same is necessary for the safety of either on-site or off-site of the premises or persons, the holder of the license
shall execute the recommendations and report compliance within the period specified by such authority.
(13) Accidents by fire or explosion and losses, shortage or theft of explosives shall be immediately reported to the
nearest police station and the licensing authority and local office of the licensing authority.
Signature, Designation and seal of licensing authority
SET - VII
The following are the conditions of licence number ………. to possess for use, for agricultural purpose or in small
quarry, explosives not exceeding 25 kilogrammes of Class 1, 2 or 3; 1500 numbers detonators; and 1500 meters of
Detonating Fuse or Safety Fuse at any one time in a magazine in Form LE-3 [Article 3(a)] granted by the District
Magistrate.
CONDITIONS
(1) The quantity of explosives on the premises at any one time shall not exceed the licensable capacity.
(2) The magazine used for storage of explosives shall maintain safety distance of 45 meters from protected works.
(3) The magazine shall be used only for keeping explosives specified in this licence and of receptacles, tools or
implements for work connected with the keeping of such explosives.
(4) The opening of packages and the weighing and packing of explosives shall not be carried in the magazine.
(5) Two or more description or explosives which may be permitted to be kept in the magazine shall be kept only if they
are separated from each other by an intervening partition of such substance or character, or by such intervening
274 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
space, as will effectually prevent explosion or fire in the one communicating with the other :
Provided that—
(a) the various explosives of Classes 2 (nitrate-mixture), 3 (nitro-compound), safety fuses belonging to Class 6
Division 1 and detonating fuses belonging to Class 6 Division 2 as do not contain any exposed iron or steel,
may be kept with each other without any intervening partition or space;
(b) Detonators belonging to Class 6 Division 3 shall be kept separately;
(c) Gunpowder belonging to Class 1 shall be kept separately.
(6) Explosives of Class 3 (nitro-compound) shall not be kept in the magazine after the expiration of one year from the
date of their manufacture except with the special sanction of licensing authority.
(7) When an explosive owing to its being no longer of standard purity or owing to signs of liquefaction or of exuded
nitro-glycerine or liquid nitro-glycerine or liquid nitro-compound is no longer fit for storage in the magazine, the
licensee shall comply, at his own expense, with such directions as licensing authority may issue.
(8) The interior of the magazine and the benches, shelves and fittings therein shall be so constructed or so lined or
covered as to prevent the exposure of any iron or steel to come in contact with the explosives. Such interior,
benches, shelves and fittings shall so far as is reasonably practicable, be kept free from grit and shall otherwise be
clean; and in the case of any explosives liable to be dangerously affected by water, due precautions shall be taken
to exclude water therefrom:
Provided that so much of this condition as relates to precautions against the exposure of any iron or steel
shall not be obligatory in a building in which no explosive other than safety fuses belonging to Class 6
Division 1 are kept.
(9) If the lighting conductor is tested by licensing authority, the licensee shall pay the fees prescribed for test. In the
event of the test proving unsatisfactory, the same fees shall be payable by the licensee for each subsequent test
until the lighting conductor is passed by the testing officer as satisfactory :
Provided that the fees payable for a single test shall be charged for all tests made on a conductor during any
one day :
Provided further that where two or more lighting conductors are attached to one and the same magazine, the
fee for the testing of all such conductors shall not exceed the fee prescribed in this condition for testing a
single lighting conductor.
(10) The licensee shall keep records and accounts of all explosives in Forms RE-2 and RE-4 and exhibit the stock books
and records to the officers authorised under these rules whenever such officer may call upon him to do so. The
stock books in prescribed proforma shall be page numbered.
(11) Any accident and losses, shortage of stock and thefts of explosives shall be reported without delay to the nearest
police station, and the licensing authority.
(12) Free access to the licensed premises shall be given at all times to any inspecting or sampling officer and all facilities
shall be offered to the officer for ascertaining that the provisions of the Act and these rules and the conditions of
this licence are duly observed.
(13) No changes or alterations shall be carried out to the premises without prior approval of the licensing authority and
the licensee shall comply with any condition that may be specified by the licensing authority in this behalf.
(14) If the licensing authority calls upon the holder of the licence by a notice in writing to take any action which may
in the opinion of such authority be necessary for the safety of the premises or the public, the holder of licence shall
take such action within such period, not being less than one month from the date of receipt of the notice, as may
be fixed by the notice.
(15) Magazine shall at all times be kept in state of good repair (or maintained in good condition). The licensee shall
report to licensing authority forthwith, if the magazine becomes unfit for storage of any explosives for any reason
whatsoever.
(16) The licensee of the magazine shall submit at the end of every quarter a return in Form RE-7 to the District
Magistrate and District Superintendent or Commissioner of Police in whose jurisdiction the magazine is situated
in the proforma prescribed from time to time so as to reach the above authorities by 10th day of the succeeding
quarter.
[Öæ» II—¹‡ÇU 3(i)]p ÖæÚUÌ ·¤æ ÚUæÁ¹̃ æ Ñ ¥âæÏæÚU‡æ 275
(17) Any encroachment of the safety distance shall be immediately communicated to the licensing authority for
necessary advice and action.
(18) The licensing authority shall be immediately informed for advice if any explosive is found deteriorated or
unserviceable.
(19) The explosive packages shall be stacked in such a way so as to allow movement of at least one person to check the
condition of all packages stored and to read the manufacture particulars of each package.
(20) The resistance of the lightning conductor to earth shall be as low as possible and in no case more than 10 ohms.
(21) A distance of 15 metres surrounding the magazine shall be kept clear of dried grass or bush or flammable materials.
(22) Every packet of explosive at the time of bringing inside the magazine shall be examined for its sound condition.
(23) Not more than four persons shall be allowed inside the magazine at any one time.
(24) Empty packages of the explosives shall be removed at the earliest and destroyed.
(25) The explosives shall not be used for blasting purposes in the areas not coming within the purview of Mines Act,
1952 (35 of 1952) unless the licensee employs a qualified shot firer holding a shot-firer’s permit granted under these
rules or the person having equivalent qualifications as recognized by the Chief Controller.
(26) The licensee and the shot firer shall be responsible for preparation of charges, the charging of holes and the firing
of shots and shall take all precautions against fire and accident involving the explosives.
(27) No smoking or any source of light or fire shall be allowed in or near the place where explosives charges are being
prepared or kept.
(28) For charging or stemming a shot hole, no person shall use an iron or steel tools, scraper, or tamping or nor shall
forcibly press the explosive into a hole of insufficient size. A tamping rod made entirely of wood shall be used.
(29) Before exploding any blasting charge, adequate measures shall be taken so as to prevent as far as possible, the
projection of fragments of stone by the explosion of the blasting charge.
(30) No person shall re-bore or temper a hole that has once been charged or attempt to withdraw a charge either before
firing or after a misfire or deepen or tamper with empty holes or sockets left after blasting.
(31) Before commencing shot firing the licensee shall give sufficient warning to the public by an efficient system of
signals and by putting up red flags in the danger zone. He shall see that all persons in the vicinity have taken
proper shelter and shall also take suitable steps to prevent any person approaching the shot.
(32) The licensee shall warn the public not to approach the site of blasting operation at least within an hour after
explosion or in the case of an open quarry, not to approach such quarry within half an hour after explosion.
(33) The number of shots, which explode, shall be counted and unless it is certain that all the shots have exploded no
person shall approach or be permitted to approach the place until 30 minutes after the firing of shots.
(34) In the event of a misfire, if relieving hole is to be drilled it shall not be placed within 30 centimetres from the misfired
hole. The relieving hole shall run parallel to the misfired hole.
(35) The licensee and the employee shall be conversant with procedure to be taken during the emergency within the
premises.
(36) Free access to the licensed premises shall be given at all reasonable times to any inspecting or sampling officer and
every facility shall be afforded to the officer for ascertaining that the provisions of the Act or these rules and the
safety conditions are duly observed.
(37) If the licensing authority or a Controller of Explosives informs in writing, the holder of the licence to execute any
repairs or to make any additions or alterations to the licensed premises or machinery, tools or apparatus or carry
out recommendations, which are in the opinion of such authority may pose unacceptable risk and so necessary for
the safety of either on-site or off-site of the premises or persons, the holder of the license shall execute the
recommendations and report compliance within the period specified by such authority.
(38) Accidents by fire or explosion and losses, shortage or theft of explosives shall be immediately reported to the
nearest police station and the licensing authority and local office of the licensing authority.
Signature, Designation and seal of licensing authority
276 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
SET-VIII
The following are the conditions of licence number ………. to possess for sale or use, explosives of Class 1, 2, 3, 4, 5, 6
or 7 in a magazine in Form LE-3 [articles 3(b) to (c)] granted by Chief Controller of Explosives or Controller of
Explosives.
CONDITIONS
(1) The quantity of explosives on the premises at any one time shall not exceed the licensable capacity.
(2) The magazine used for storage of explosives shall maintain safety distance specified in Schedule III and annexure
to the licence.
(3) The magazine shall be used only for keeping all explosives specified in this licence and of receptacles for, or tools
or implements for work connected with the keeping of such explosives.
(4) The opening of packages and the weighting and packing of explosives shall not be carried on in the magazine.
(5) Two or more description or explosives which may be permitted to be kept in the magazine shall be kept only if they
are separated from each other by an intervening partition of such substance or character, or by such intervening
space, as will effectually prevent explosion or fire in the one communicating with the other;
Provided that—
(d) the various explosives of Class 2 (nitrate-mixture), Class 3 (nitro-compound), safety fuses belonging to Class
6 Division 1and detonating fuses belonging to Class 6 Division 2 as do not contain any exposed iron or steel,
may be kept with each other without any intervening partition or space ;
(e) Detonators belonging to Class 6 Division 3 shall be kept separately;
(f) Gun powder belonging to Class 1 shall be kept separately.
(6) Explosives of Class 3 (nitro-compound) shall not be kept in the magazine after the expiration of one year from the
date of their manufacture except with the special sanction of licensing authority.
(7) Explosives of Class 3 (nitro-compound) shall not be kept in the magazine after the expiration of one year from the
date of their manufacture except with the special sanction of the Controller of Explosives.
(i) When such sanction has been given, a written certificate showing the period covered by the sanction shall be
obtained from the Controller of Explosives at each inspection, and shall be kept by the licensee and produced
on demand.
(ii) When an explosive owing to its being no longer of standard purity or owing to signs of liquefaction or of
exuded nitro-glycerine or liquid nitro-glycerine or liquid nitro-compound is no longer fit for storage in the
magazine or store house the licensee shall comply, at his own expense, with such directions as to its disposal
as the Chief Controller or Controller of Explosives may issue.
(8) The interior of the magazine and the benches, shelves and fittings therein shall be so constructed or so lined or
covered as to prevent the exposure of any iron or steel to come in contact with the explosives. Such interior,
benches, shelves and fittings shall, so far as is reasonably practicable, be kept free from grit and shall otherwise be
clean; and in the case of any explosives liable to be dangerously affected by water, due precautions shall be taken
to exclude water there from :
Provided that so much of this condition as relates to precautions against the exposure of any iron or steel shall not
be obligatory in a building in which no explosive other than explosive of the 1st Division 6th (Ammunition) Class
is kept.
(9) If the lighting conductor is tested by the Controller of Explosives, the licensee shall pay the fees prescribed for test. In
the event of the test proving unsatisfactory, the same fees shall be payable by the licensee for each subsequent test until
the lighting conductor is passed by the testing officer as satisfactory:
Provided that the fees payable for a single test shall be charged for all tests made on a conductor during any one day :
Provided further that where two or more lighting conductors are attached to one and the same magazine, the fee for
the testing of all such conductors shall not exceed the fee prescribed in this condition for testing a single lighting
conductor.
(10) Due provisions shall be made, by the use of suitable working clothes without pockets, suitable shoes and by
searching or otherwise or by such means, for preventing the introduction into danger area of the factory premises
of fire, Lucifer matches or any substance or article likely to cause explosion or fire, but this condition shall not
[Öæ» II—¹‡ÇU 3(i)]p ÖæÚUÌ ·¤æ ÚUæÁ¹̃ æ Ñ ¥âæÏæÚU‡æ 277
prevent the introduction of an artificial light of such construction, position or character as not to cause any danger
of fire or explosion:
Provided that so much of this condition as applies to the exclusion of iron or steel, shall not be obligatory in a
building in which no explosive other than an explosive of the 1st Division of the 6th (Ammunition) Class is kept.
(11) The licensee shall keep records and accounts of all explosives in Forms RE-3 and RE-4 or RE-5, as the case may be,
and exhibit the stock books and records to any of the officers authorised under the Explosives Rules, 2008
whenever such officer may call upon him to do so. The stock books in the prescribed proforma shall be page
numbered.
(12) No changes or alterations shall be carried out to the premises without prior approval of the licensing authority and
the licensee shall comply with any condition that may be specified by the licensing authority in this behalf.
(13) Magazine shall at all times be kept in state of good repair (or maintained in good condition). The licensee shall
report to licensing authority forthwith, if the magazine becomes unfit for storage of any explosives for any reason
whatsoever.
(14) The licensee of the magazine shall submit quarterly return as per sub-rules (3) and (4) of rule 24 of these rules.
(15) Any encroachment of the safety distance shall be immediately communicated to the licensing authority for
necessary advice and action.
(16) The licensing authority shall be immediately informed for advice if any explosive is found deteriorated or
unserviceable.
(17) The explosive packages shall be stocked in such a way so as to allow movement of at least one person to check the
condition of all packages stored and to read the manufacture particulars of each package.
(18) The resistance of the lightning conductor to earth shall be as low as possible and in no case be more than 10 ohms.
(19) A distance of 15 meters surrounding the magazine or store house shall be kept clear of dried grass or bush or
flammable materials.
(20) Every package of explosive at the time of bringing inside the magazine shall be examined for its sound condition.
(21) Not more than 4 persons shall be allowed inside the magazine or store house at any one time.
(22) Empty packages of the explosives shall be removed at the earliest and destroyed.
(23) The licensee and the employee shall be conversant with procedure to be taken during the emergency within the
premises.
(24) Free access to the licensed premises shall be given at all reasonable times to any inspecting or sampling officer and
every facility shall be afforded to the officer for ascertaining that the provisions of the Act and these rules and the
safety conditions are duly observed.
(25) If the licensing authority or a Controller of Explosives informs in writing, the holder of the licence to execute any
repairs or to make any additions or alterations to the licensed premises or machinery, tools or apparatus or carry
out recommendations, which are in the opinion of such authority may pose unacceptable risk and so necessary for
the safety of either on-site or off-site of the premises or persons, the holder of the license shall execute the
recommendations and report compliance within the period specified by such authority.
(26) The licensee shall purchase authorised explosives/ fireworks or safety fuse as mentioned in the list authorised
explosives from a licensed factory or company for possession and sale from the magazine.
(27) The possession and sale of fire-crackers generating noise level exceeding;
(a) 125 dB(AI) or 145 dB(C)/pk/at 4 meters distance from the point of bursting shall be prohibited;
(b) For individual fire-cracker constituting the series (joined fire-crackers), the above mentioned limit be reduced
by 5 log10 (N) dB, where N = number of crackers joined together.
(28) Accidents by fire or explosion and losses, shortage or theft of explosives shall be immediately reported to the
nearest police station and the licensing authority and local office of the licensing authority.
Signature, Designation and Seal of Licensing Authority
278 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
SET-IX
The following are the conditions of licence number ………. to possess fireworks not exceeding 5,000 kilogrammes or
safety fuse not exceeding 50,000 metres, in a storehouse, not for sale but for transfer to own licensed shop; in Form
LE-3 [article 3(d)] granted by Controller of Explosives
CONDITIONS
(1) The quantity of fireworks or safety fuse in the premises at any one time shall not exceed the licensed capacity.
(2) The licensee shall purchase authorised fireworks or safety fuse as mentioned in the list authorised explosives from
a licensed factory or company for possession in the store house.
(3) No fireworks containing chlorate except paper caps or amorces or colour match or fireworks approved by Chief
Controller shall be kept in the premises.
(4) The opening of packages and the weighing and packing of fireworks or safety fuse shall not be carried out in the
store house.
(5) The store house shall be constructed as per specification given in specification 3 of Schedule VII.
(6) A person holding licence for possession and sale of fireworks or safety fuse from a shop shall only be eligible for
a licence for storehouse.
(7) The paper caps or amorces or colour or star matches which contain chlorate, which may be permitted to be kept in
the store house, shall be kept only if they are separated from each other by an intervening partition wall made of
brick or stone with cement mortar to prevent explosion or fire in the one communicating to the other.
(8) The interior of the store house and the benches, shelves and fittings therein shall be so constructed or so lined or
covered as to prevent the exposure of any iron or steel to come in contact with the explosives. Such interior,
benches, shelves and fittings shall so far as is reasonably practicable, be kept free from grit and otherwise clean;
and in the case of any explosives liable to be dangerously affected by water, due precautions shall be taken to
exclude water therefrom.
(9) Due provisions shall be made, by the use of suitable working clothes without pockets, suitable shoes and by
searching or otherwise or by such means, for preventing the introduction into danger area of the store house
premises of fire, Lucifer matches or any substance or article likely to cause explosion or fire, but this condition shall
not prevent the introduction of an artificial light of such construction, position or character as not to cause any
danger of fire or explosion or light of dust proof approved by Chief Controller.
(10) The licensee shall keep records and accounts of all fireworks manufactured and of all stocks in hand in Form
RE-2 and RE-3 and exhibit the stock books and records to any of the officers authorised under the Explosives
Rules, 2008 whenever such officer may call upon him to do so.
(11) No changes or alterations shall be carried out to the premises without prior approval of the licensing authority and
the licensee shall comply with any condition that may be specified by the licensing authority in this behalf.
(12) Store house shall at all times be kept in state of good repair (or maintained in good condition). The licensee shall
report to licensing authority forthwith, if the storehouse becomes unfit for storage of any explosives for any
reason whatsoever.
(13) Any encroachment of the safety distance required to be kept clear as shown in enclosed Form DE - 2 shall be
immediately communicated to the licensing authority for necessary advice and action.
(14) The store house shall be used only for possession and for no other purposes. However the premises may be used
for other purpose, as permitted by the licensing authority, when no explosives is kept in the premises.
(15) The licensing authority shall be immediately informed for advice if any fireworks or safety fuse is found deteriorated
or unserviceable.
(16) The fireworks or safety fuse packages shall be stacked in such a way so as to allow movement of at least one
person to check the condition of all packages stored and to read the manufacture particulars of each package.
(17) A distance of 3 metres surrounding the storehouse shall be kept clear of dried grass or bush or flammable
materials.
(18) Every package of fireworks or safety fuse at the time of bringing inside the storehouse shall be examined for its
sound condition.
(19) Not more than 4 persons shall be allowed inside the store house at any one time.
[Öæ» II—¹‡ÇU 3(i)]p ÖæÚUÌ ·¤æ ÚUæÁ¹̃ æ Ñ ¥âæÏæÚU‡æ 279
(20) Empty packages of the fireworks or safety fuse shall be removed at the earliest and destroyed.
(21) All tools and implements kept or used in opening or closing of packages of fireworks shall be made only of wood,
copper, brass or other similar soft metal or shall be covered with some safe and suitable material.
(22) No person shall smoke or have any Lucifer matches or any other fire producing devices in any part of the premises.
(23) The licensee and the employee shall be conversant with procedure to be taken during the emergency within the
premises.
(24) Free access to the licensed premises shall be given at all times to any inspecting or sampling officer and all facilities
shall be offered to the officer for ascertaining that the provisions of the Act or these rules and the conditions of
this licence are duly observed.
(25) If the licensing authority or a Controller of Explosives inform in writing, the holder of the licence to execute any
repairs or to make any additions or alterations to the licensed premises or machinery, tools or apparatus or carry
out recommendations, which are in the opinion of such authority may pose unacceptable risk and therefore the
same is necessary for the safety of either on-site or off-site of the premises or persons, the holder of the license
shall execute the recommendations and report compliance within the period specified by such authority.
(26) The possession of fire-crackers generating noise level exceeding :
(i) 125 dB(AI) or 145 dB(C)pk at 4 metres distance from the point of bursting shall be prohibited.
(ii) For individual fire-cracker constituting the series (joined fire-crackers), the above-mentioned limit be
reduced by 5 log10 (N) dB, where N = number of crackers joined together.
(27) There shall at all times be kept prominently exhibited in clearly legible writing—
(a) Licence No. of the premises.
(b) The quantity of the various fireworks authorised for storage.
(c) The daily opening stock of various fireworks.
(28) Accidents by fire or explosion and losses, shortage or theft of explosives shall be immediately reported to the
nearest police station and the licensing authority and local office of the licensing authority.
Signature, Designation and Seal of Licensing Authority
SET - X
The following are the conditions of licence number ………. to possess and sell from a shop, at any one time, not
exceeding 25 kilogrammes of small-arms nitro- compound in Form LE-5 [article 5(a)] granted by District Magistrate.
CONDITIONS
(1) The holder of this licence is authorised to sell only small arm nitro- compound in quantities not exceeding the
quantities as specified in the licence.
(2) The small arm nitro- compound shall be kept in premises made of non-flammable material which is closed and
secured so as to prevent unauthorised persons having access thereto.
(3) No oil burning lamps, gas lamps or naked lights shall be used in the shed or within the safety distance of the sheds
for the purpose of lighting. Any electrical light, if used shall be fixed to the wall or ceiling and should not be
suspended by flexible wire.
(4) The licensee shall keep records and accounts of all explosives in stock and of all sales in form below as the
licensing authority may from time to time direct and shall exhibit his stock and his books and records to any of the
officers authorised under these rules whenever such officer may call upon him to do so.
Date Opening Quantity Name and licence number Quantity of Closing
balance of small of the licensee from whom small arm nitro- balance
arm nitro- purchased compound
compound sold
purchased
(5) All sales under this licence must be made in the premises described in the licence and shall not be sold to any
person under the age of 16 years.
280 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(6) The licensee and the employee shall be conversant with procedure to be taken during the emergency within the
premises.
(7) Free access to the licensed premises shall be given at all reasonable times to any inspecting or sampling officer
and every facility shall be afforded to the officer for ascertaining that the provisions of the Act or these rules and
the safety conditions are duly observed.
(8) If the licensing authority informs in writing, the holder of the licence to execute any repairs or to make any
additions or alterations to the licensed premises or machinery, tools or apparatus or carry out recommendations,
which are in the opinion of such authority may pose unacceptable risk and so necessary for the safety of either
on-site or off-site of the premises or persons, the holder of the license shall execute the recommendations and
report compliance within the period specified by such authority.
(9) Accidents by fire or explosion and losses, shortage or theft of explosives shall be immediately reported to the
nearest police station and the licensing authority and local office of the licenceing authority.
Signature, Designation and Seal of Licensing Authority
SET-XI
The following are the conditions of licence number ………. to possess and sell from a shop, at any one time, not exceeding
100 kilogrammes of manufactured fireworks of Class 7 Division 2 sub-division 2; and 500 kilogrammes of Chinese
crackers or sparklers in Form LE-5 [article 5(b)] granted by District Magistrate.
CONDITIONS
(1) The fireworks shall be kept in a shed/building made of non flammable material, which is closed and secured so
as to prevent unauthorised persons having access thereto.
(2) No oil burning lamps, gas lamps or naked lights shall be used in the shed or within the safety distance of the
sheds for the purpose of lighting. Any electrical light, if used shall be fixed to the wall or ceiling and should not
be suspended by flexible wire. Switches should be fixed rigidly.
(3) The licensee and the employee shall be conversant with procedure to be taken during the emergency within the
premises.
(4) Free access to the licensed premises shall be given at all reasonable times to any inspecting or sampling officer
and every facility shall be afforded to the officer for ascertaining that the provisions of the Act or these rules
and the safety conditions are duly observed.
(5) If the licensing authority informs in writing, the holder of the licence to execute any repairs or to make any
additions or alterations to the licensed premises or machinery, tools or apparatus or carry out.
recommendations, which are in the opinion of such authority may pose unacceptable risk and so necessary for
the safety of either on-site or off-site of the premises or persons, the holder of the license shall execute the
recommendations and report compliance within the period specified by such authority.
(6) Accidents by fire or explosion and losses, shortage or theft of explosives shall be immediately reported to the
nearest police station and the licensing authority and local office of the licensing authority.
(7) The licensee shall purchase authorised fireworks as mentioned in the list of authorised explosives from a
licensed factory or company for possession and sale from the shop.
(8) Fireworks / colour /star matches containing chlorates shall be separated from other type of fireworks by
intervening partition of such substance and character or by such intervening space, as well effectually prevent
explosion or fire in the one communicating with other.
(9) All sales of fireworks under this licence must be made in the premises described in the licence.
(10) No fireworks containing chlorate except paper caps or amorces or colour match or fireworks approved by Chief
Controller shall be kept in the premises.
(11) The licensee shall keep records and accounts of all explosives in stock and of all sales in form below as the
licensing authority may from time to time direct and shall exhibit his stock and his books and records to any of
the officers authorised under these rules, whenever such officer may call upon him to do so.
[Öæ» II—¹‡ÇU 3(i)]p ÖæÚUÌ ·¤æ ÚUæÁ¹̃ æ Ñ ¥âæÏæÚU‡æ 281
Date Opening Quantity of Name and licence number Quantity of Closing
balance fire works of the licensee from whom fire works sold balance
purchased purchased
(12) No fireworks capable of generating noise exceeding level as under shall be stored in the premises and sale from the
premises :
(a) 125 dB(AI) or 145 dB(C)pk at 200 meters distance from the point of bursting shall be prohibited.
(b) For individual fire-cracker constituting the series (joined fire-crackers), the above mentioned limit be reduced
by 5 log10 (N) dB, where N = number of crackers joined together.
Signature, Designation and Seal of Licensing Authority
SET - XII
The following are the conditions of licence number ………. to possess and sell or use from a shop, at any one time, not
exceeding 2000 numbers of pyrotechnic device explosives of Class 6 Division 1 in Form LE-5 [article 5 (c )] granted by the
District Magistrate.
CONDITIONS
(1) The holder of this licence is authorised to possess for sale or use only pyrotechnic device explosives in quantities
not exceeding the quantity as specified in the licence.
(2) The pyrotechnic device explosives shall be kept in premises made of non-flammable material which is closed and
secured so as to prevent unauthorised persons having access thereto.
(3) No oil burning lamps, gas lamps or naked lights shall be used in the shed or within the safety distance of the sheds
for the purpose of lighting. Any electrical light, if used shall be fixed to the wall or ceiling and should not be
suspended by flexible wire.
(4) The licensee shall keep records and accounts of all explosives in stock and of all sales in form below as the
licensing authority may from time to time direct and shall exhibit his stock and his books and records to any of the
officers authorised under these rules, whenever such officer may call upon him to do so.
Date Opening Quantity of Name and licence number Quantity of Closing
balance pyrotechnic of the licensee from whom pyrotechnic balance
device explo- purchased device explo-
sives purchased sives sold
(5) The licensee and the employee shall be conversant with procedure to be taken during the emergency within the
premises.
(6) Free access to the licensed premises shall be given at all reasonable times to any inspecting or sampling officer and
every facility shall be afforded to the officer for ascertaining that the provisions of the Act or these rules and the
safety conditions are duly observed.
(7) If the licensing authority informs in writing, the holder of the licence to execute any repairs or to make any
additions or alterations to the licensed premises or machinery, tools or apparatus or carry out recommendations,
which are in the opinion of such authority may pose unacceptable risk and so necessary for the safety of either on-
site or off-site of the premises or persons, the holder of the license shall execute the recommendations and report
compliance within the period specified by such authority.
(8) Accidents by fire or explosion and losses, shortage or theft of explosives shall be immediately reported to the
nearest police station and the licensing authority and local office of the licensing authority.
Signature, Designation and Seal of Licensing Authority
282 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
SET-XIII
The following are the conditions of licence number ………. to possess for use Gunpowder not exceeding 5 kilogrammes.
and safety fuse not exceeding 50 meters in the States of Bihar, West Bengal, Kerala and Tamilnadu in Form LE-5 [article
5(d)] granted by District Magistrate.
CONDITIONS
(1) The maximum quantity of gunpowder, which may be kept at one time on the licensed premises, shall not exceed 5
Kilograms.
(2) Gunpowder shall be kept in a secured substantial receptacle.
(3) The interior of every receptacle used for keeping gunpowder shall be so constructed or so lined and covered as to
prevent the exposure of any iron or steel or the detaching of any grit, iron, steel or similar substance in such
manner as to come into contact with the gunpowder.
(4) The receptacle in which gunpowder is kept must be kept locked and used only for the keeping of such gunpowder
and for no other purpose whatsoever.
(5) Gunpowder exceeding 0.5 kilogramme in amount must be kept in a substantial bag, canister or case made and
closed so as to prevent any gunpowder from escaping and shall be otherwise packed and marked in accordance
with the requirements of rule 14 and 15 of Explosives Rules,2008.
(6) No oils, paints, matches, lights or any article of a highly inflammable or explosive nature or liable to cause fire or
explosion or any acids or similar substances shall be brought or kept on the licensed premises.
(7) The licensee shall at the time of purchasing have the following particulars endorsed upon his licence and signed
by the person delivering the gun powder :
Name and address and Signature The quantities of gun Name and address of The date of
licence number of the powder purchased the person who takes purchase
person delivering gun delivery
powder
(8) The licensee shall keep register of all receipts and issues in such form shall exhibit his stock and register to any of
the officers authorised under rule 128 of these rules, whenever such officer may call upon him to do so.
(9) The licensee and the employee shall be conversant with procedure to be taken during the emergency within the
premises.
(10) Free access to the licensed premises shall be given at all reasonable times to any inspecting or sampling officer and
every facility shall be afforded to the officer for ascertaining that the provisions of the Act or these rules and the
safety conditions are duly observed.
(11) If the licensing authority informs in writing, the holder of the licence to execute any repairs or to make any
additions or alterations to the licensed premises or machinery, tools or apparatus or carry out recommendations,
which are in the opinion of such authority may pose unacceptable risk and so necessary for the safety of either
on-site or off-site of the premises or persons, the holder of the license shall execute the recommendations and
report compliance within the period specified by such authority.
(12) Accidents by fire or explosion and losses, shortage or theft of explosives shall be immediately reported to the
nearest police station and the licensing authority and local office of the licensing authority.
Signature, Designation and Seal of Licensing Authority
[Öæ» II—¹‡ÇU 3(i)]p ÖæÚUÌ ·¤æ ÚUæÁ¹̃ æ Ñ ¥âæÏæÚU‡æ 283
SET-XIV
The following are the conditions of licence number ………. to possess for use of small-arms nitro-compound not
exceeding 5 kilogrammes in the State of Kerala in Form LE 5 [article 5(e)] granted by District Magistrate.
CONDITIONS
(1) The maximum quantity of small-arms nitro-compound, which may be kept at one time on the licensed premises,
shall not exceed 5 kilogrammes.
(2) Small-arms nitro-compound exceeding 0.5 kilogramme shall be kept in a substantial bag, canister or case made and
closed so as to prevent any small-arms nitro-compound from escaping and shall be otherwise packed and marked
in accordance with the requirements of rules 14 and 15 of these rules.
(3) The interior of every receptacle used for keeping small-arms nitro-compound shall be so constructed or so lined
and covered as to prevent the exposure of any iron or steel or the detaching of any grit, iron, steel or similar
substance in such manner as to come into contact with the small-arms nitro-compound.
(4) The receptacle in which small-arms nitro-compound is kept must be kept locked and used only for the keeping of
such small-arms nitro-compound and for no other purpose whatsoever.
(5) No oils, paints, matches, lights or any article of a highly inflammable or explosive nature or liable to cause fire or
explosion or any acids or similar substances shall be brought or kept on the licensed premises.
(6) The licensee shall at the time of purchasing have the following particulars endorsed upon his licence and signed
by the person delivering the small-arms nitro-compound.
Name and address and Signature The quantities of small- Name and address of The date of
licence Number of the arms nitro-compound the person who takes purchase
person delivering small- purchased delivery
arms nitro-compound
(7) The licensee shall keep register of all receipts and issues in above form and shall exhibit his stock and register to
any of the officers authorised under rule 128 of the Explosives Rules, whenever such officer may call upon him so
to do.
(8) The licensee and the employee shall be conversant with procedure to be taken during the emergency within the
premises.
(9) Free access to the licensed premises shall be given at all reasonable times to any inspecting or sampling officer and
every facility shall be afforded to the officer for ascertaining that the provisions of the Act and these rules and the
safety conditions are duly observed.
(10) If the licensing authority informs in writing, the holder of the licence to execute any repairs or to make any
additions or alterations to the licensed premises or machinery, tools or apparatus or carry out recommendations,
which are in the opinion of such authority may pose unacceptable risk and so necessary for the safety of either
on-site or off-site of the premises or persons, the holder of the license shall execute the recommendations and
report compliance within the period specified by such authority.
(11) Accidents by fire or explosion and losses, shortage or theft of explosives shall be immediately reported to the
nearest police station and the licensing authority and local office of the licensing authority.
Signature, Designation and seal of licensing authority
SET- XV
The following are the conditions of licence number ………. to possess and sell from a shop manufactured fireworks of
Class 7 Division 2 sub-division 2 exceeding 100 kilogrammes but not exceeding 300 kilogrammes, and Chinese Crackers
or Sparklers (manufactured fireworks of Class 7, Division 2, sub-division 1) exceeding 500 kilogrammes but not
exceeding 1200 kilogrammes in Form LE 5 [article 5(f)] granted by Controller of Explosives
CONDITIONS
(1) The fireworks shall be kept in a shed/building made of non flammable material, which is closed and secured so as
to prevent unauthorised persons having access thereto.
284 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) No oil burning lamps, gas lamps or naked lights shall be used in the shed or within the safety distance of the sheds
for the purpose of lighting. Any electrical light, if used shall be fixed to the wall or ceiling and should not be
suspended by flexible wire. Switches should be fixed rigidly.
(3) The licensee and the employee shall be conversant with procedure to be taken during the emergency within the
premises.
(4) Free access to the licensed premises shall be given at all reasonable times to any inspecting or sampling officer and
every facility shall be afforded to the officer for ascertaining that the provisions of the Act or these rules and the
safety conditions are duly observed.
(5) If the licensing authority informs in writing, the holder of the licence to execute any repairs or to make any
additions or alterations to the licensed premises or machinery, tools or apparatus or carry out recommendations,
which are in the opinion of such authority may pose unacceptable risk and so necessary for the safety of either
on-site or off-site of the premises or persons, the holder of the license shall execute the recommendations and
report compliance within the period specified by such authority.
(6) Accidents by fire or explosion and losses, shortage or theft of explosives shall be immediately reported to the
nearest police station and the licensing authority and local office of the licensing authority.
(7) No fireworks containing chlorate except paper caps or amerces or colour match or fireworks approved by Chief
Controller shall be kept in the premises.
(8) The licensee shall purchase authorised fireworks as mentioned in the list of authorised explosives from a licensed
factory or company for possession and sale from the shop.
(9) Fireworks /colour/star matches containing chlorates shall be separated from other type of fireworks by intervening
partition of such substance and character or by such intervening space, as well that effectually prevent explosion
or fire in the one communicating with other.
(10) All sales of fireworks under this licence must be effected on the premises described on the face of the licence.
(11) The licensee shall keep records and accounts of all explosives in stock and of all sales in form below as the
licensing authority may from time to time direct and shall exhibit his stock and his books and records to any of the
officers authorised under these rules, whenever such officer may call upon him to do so.
Date Opening Quantity of Name and licence number Quantity of Closing
balance fire works of the licensee from whom fire works sold balance
purchased purchased
(12) No fireworks capable of generating noise exceeding level as under shall be stored in the premises and sold from
the premises :
(a) 125 dB(AI) or 145 dB(C)pk at 4 meters distance from the point of bursting shall be prohibited
(b) For individual fire-cracker constituting the series (joined fire-crackers), the above mentioned limit be
reduced by 5 log
10
(N) dB, where N = number of crackers joined together.
2Signature, Designation and seal of licensing authority
SET-XVI
Permission to manufacture, possess and sell colour or star matches under sub-rule (2) of rule 9 of the Explosives
Rules, 2008
Number ……….
Permission is hereby granted to……………………………(name and address ) valid only to manufacture, possess and
sell colour and /or star matches at any one time at the premises described below subject to the conditions given below :
This permission is liable to be suspended or revoked for any violation of the Act or these rules or the conditions of
this permission or if the premises are not found conforming to the description shown in the attached plans and
annexure.
[Öæ» II—¹‡ÇU 3(i)]p ÖæÚUÌ ·¤æ ÚUæÁ¹̃ æ Ñ ¥âæÏæÚU‡æ 285
Description of the premises
The permitted premises shown in plan number …….. ……………… ………………………..…attached hereto are
situated at …………………… ……...……District……………….……State…………and consist of …………………
……………………… …………………………………………………….…..
Dated the ……….20….
[Chief Controller of Explosives]
CONDITIONS
(1) The manufacture of colour or star matches shall be done in a factory approved by the Chief Controller of Explosives.
(2) (a) The colour or star matches shall be manufactured in one or more lightly constructed single storied buildings(s)
which may be divided into rooms. The quantity of colour and / or star matches or its ingredients in the manufacturing
rooms and bonded storage room shall not exceed the following quantity:
Serial Room Quantity for Quantity for Quantity for
Number manufacture of 100 manufacture of manufacture of
kilogrammes at a time 200 kilogrammes 500 kilogrammes
at a time at a time
1. Mixing 20 40 100
2. Drying dipped splints 20 40 100
3. Dipping 20 40 100
4. Box filling 10 20 50
5. Painting/side painting 10 20 50
6. Band rolling 10 20 50
7. Packing 10 20 50
8. Bonded storage 200 500 2000
(b) Not more than four persons shall be allowed at any time in any of the manufacturing rooms namely Mixing,
Drying and Dipping rooms.
(c) Doors of all the rooms shall open outwards.
(d) A clear space of 6 metres, 9 metres or 15 metres for the manufacturing capacity of 100 Kilogrammes, 200
Kilogrammes or 500 Kilogrammes, respectively, shall be maintained all round the factory building. Barbed wire
fencing or wall of 2 metres high and adequate strength shall be provided along the perimeter of the safety zone.
(e) The manufacturing and storage rooms shall have adequate space to accommodate comfortably the prescribed
quantity of explosives and the number of persons.
(3) (a) The explosive mixture on each stick shall not exceed 0.8 gramme in the case of colour match and 1.0 gramme in
the case of star match.
(b) The side painting on each box shall have a clearance of at least 2 millimetres from the edges.
(4) (a) Ingredients shall be kept adequately separated until mixing. Potassium Chlorate shall be kept in a separate room
away from the other ingredients storage.
(b) Mixing of the ingredients shall be done under solvent or water. Any electrical grinder used for mixing shall have
flameproof / dust tight motor and accessories as the case may be.
(c) The dipped splinter frames shall be dried in racks not exceeding 1.8 metres in height and the number of such
racks in the drying room shall not exceed 10 in number. Each rack shall hold a maximum of 10 frames placed in
the alternate groves.
(d) The matches shall not be accumulated unpacked and shall be packed as soon as they are dried.
(e) The manufacture shall be done only between sunrise and sunset.
286 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(f) No loose explosives composition shall be left in the factory at the end of the working day. All such material shall
be carefully collected and destroyed at the end of the day as per the procedure laid down.
(5) (a) The interior of the manufacturing rooms and the fittings therein, other than machinery, shall be so constructed,
lined or covered as to prevent exposure of any iron or steel or detaching of any grit, iron or similar substance
in such manner as to come in contact with any explosives. The interior including the floor of the rooms shall be
kept clean and free from grit.
(b) No tools, implements, balance, weights, receptacles etc. made of iron or steel shall be brought or kept at any
time in the licensed premises.
(c) No stone implements such as mortars, pestles, grinders etc. shall be used for grinding, mixing or pounding of
match composition.
(6) (a) All due precautions shall be taken during drying of the match sticks and in handling dried matches. No
smoking, fire or naked light shall be allowed in the premises.
(b) Adequate provisions of water shall be made in the premises for purpose of fire fighting.
(7) (a) If Controller of Explosives calls upon the manufacturer of colour and/ or star matches by notice in writing to
execute any repairs or to make any alterations to the factory premises which are in the opinion of such authority
necessary for the safety of the premises or of the persons working in the factory, the manufacturer shall execute
the repairs, alterations within the period specified in the notice.
(b) No change in the manufacturing process and no addition/alteration in the premises shall be carried out without
permission from the Chief Controller of Explosives.
(8) (a) No persons shall commit or attempt to commit any act which may tend to cause fire or explosion in or about any
place where colour and /or star matches are manufactured, stored, handled or transported.
Provided that nothing in this connection shall apply to any act which is reasonably necessary for the purpose
of manufacture, storage or handling during transport of any such matches or of any article present therewith.
(b) Every person in charge of or engaged in the manufacture, sale, transport or handling of colour or star matches
shall at all times :
(i) observe all the precautions for the prevention of accidents by fire or explosion;
(ii) prevent unauthorised persons from having access to the body composition and head composition;
(iii) prevent any other person from committing any such act as is prohibited under sub-condition (a) above.
(9) The manufacture of colour or star matches shall be done under the supervision of qualified and competent
person.
(10) Free access to the factory premises shall be given at all times to any authorised inspecting or sampling officer
and all facilities shall be offered to such officer for ascertaining that the provisions of the Act, these rules or the
conditions of this permission are duly observed.
(11) Accidents by fire or explosion and losses, shortage or theft of explosives shall be immediately reported to the
nearest police station and the licensing authority and local office of the licensing authority.
(12) If the factory is used for manufacture of safety matches as well, such manufacture shall be completely
discontinued and the premises and its ingredients shall be freed of safety match before taking up manufacture
of colour or star matches. The Controller of Explosives in whose jurisdiction the factory is situated shall be
intimated before commencing manufacture of colour or star matches and on its completion. After completion of
manufacture and before resuming manufacture of safety match, the premises shall be made free of all compositions
used in the manufacture of colour or star match.
(13) No person under 18 years of age and no person who is in a state of intoxication or of unsound mind shall be
employed in or allowed to enter the factory.
(14) The colour or star matches shall not be stored, handled or transported along with other items of fireworks,
safety matches, flammable or hazardous materials.
(15) No person shall import, export, transport, manufacture, possess, use or sell any colour/star matches which is
not approved by Chief Controller of Explosives
[Chief Controller of Explosives]
[Öæ» II—¹‡ÇU 3(i)]p ÖæÚUÌ ·¤æ ÚUæÁ¹̃ æ Ñ ¥âæÏæÚU‡æ 287
Part - 5
Forms of Accounts and Returns of Explosives
Previous and next
Questions people ask
Is form LE-10 of the Explosives Rules, 2008 still in force?
No repeal of the Explosives Rules, 2008 is recorded.