Form LE-3 issued by District Magistrate, The Explosives Rules, 2008: Form LE-3 issued by District Magistrate
The Explosives Rules, 2008 - Form LE-3 issued by District Magistrate
Text of form LE-3 issued by District Magistrate
Form LE-3 issued by District Magistrate
Form LE-3 issued by District Magistrate
(2) The following fees(one time) shall be payable for each licence issued under these rules:
Licence fees for -
(i) import of explosives Rs.1500
(ii) export of explosives Rs.1000
(iii) possession and public display of fireworks Rs. 500
(iv) possession of explosives for use for agricultural Rs. 100
purpose in Form LE-3 issued by District Magistrate
¹Hkkx II¹[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 227
C. Testing fees - The following fees shall be payable for testing of explosives in the Departmental Testing Station.
Sl. Name or type of explosive Class and Tests to be conducted Fees
No. Division (in rupees)
1 2 3 4 5
1. Gun Powder 1 1.1 Physical Properties i.e Moisture, 200
Bulk density
1.2 Chemical analysis of composition 1000
1.3 Any additional test as per BIS specification 500
2. Slurry or Gel or Emulsion 2 2.1 Physical Properties
Explosives or ANFO or 2.1.1 Physical examination (Examination of 200
Non-explosives emulsion dimensions, markings and nature of inner
matrix or SME package)
2.1.2 Density 300
2.1.3 Consistency (Examination of quality of 500
gel or slurry or emulsion)
2.1.4 Segregation (Segregation of constituents 500
in transport)
2.1.5 Behaviour on low and high temperature 1000
2.1.6 Tendency to absorb moisture 500
2.2 Chemical analysis of composition 5000
2.3 Stability Test
(Determination of stability after subjecting 1000
to such varying environmental conditions
as would tend to produce spontaneous
ignition or variation in sensitivity of an
explosive)
2.4 Ignition characteristics 1000
(Behaviour on ignition, liability to
spontaneous ignition, behaviour on
ignition in bulk)
2.5 Mechanical Sensitivity to
2.5.1 Friction 1500
2.5.2 Impact 1500
2.6 Air Gap Sensitivity 2000
2.7 Continuity of detonation 2000
2.8 Velocity of detonation 2000
2.9 Cap sensitivity 1500
2.10 Booster sensitivity 2000
2.11 Strength by ballistic Mortar 5000
2.12 Any additional test as per BIS specification 500
3 Nitro-glycerine Explosives 3 3.1 Physical properties
3.1.1 Physical examination (examination of 200
dimensions, markings and nature of inner
package)
3.1.2 Heat test (testing of stability of explosives 500
at specified temperature
3.1.3 Density. 300
228 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
3.1.4 Consistency (examination of quality of gel). 500
3.1.5 Exudation 500
3.1.6 Tendency to absorb moisture 500
3.2 Chemical analysis of composition 5000
3.3 Stability Test 1000
(Determination of stability after subjecting
to such varying environmental conditions
as would tend to produce spontaneous
ignition or variation in sensitivity of an
explosive)
3.4 Ignition characteristics 1000
(Behaviour on ignition, liability to
spontaneous ignition, behaviour on
ignition in bulk)
3.5 Mechanical Sensitivity to
3.5.1 Friction 1500
3.5.2 Impact 1500
3.6 Air Gap Sensitivity 2000
3.7 Continuity of Detonation 2000
3.8 Velocity of Detonation 2000
3.9 Cap Sensitivity 1500
3.10 Strength by Ballistic Mortar 5000
3.11 Freezing and Thawing Test 1000
3.12 Liquefaction Test 1000
3.13 Any additional test as per BIS 500
specification
4 Booster or Cast Booster 3(2) 4.1 Physical Properties
4.1.1 Physical Examination (examination of 200
dimensions, markings and nature of
inner package)
4.1.2 Density 300
4.1.3 Consistency (examination of quality
of gel or emulsion or slurry or casting) 500
4.1.4 Segregation (separation of constituents
in transport) 500
4.1.5 Behaviour on low and high temperature 1000
4.1.6 Tendency to absorb moisture 500
4.1.7 Melting point (for cast booster) 200
4.2 Chemical analysis of composition 3000
4.3 Stability Test 1000
(Determination of stability after subjecting
to such varying environmental conditions
as would tend to produce spontaneous
ignition or variation in sensitivity of an
explosive)
4.4 Ignition characteristics 1000
1 2 3 4 5
¹Hkkx II¹[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 229
(Behaviour on ignition, liability to
spontaneous ignition, behaviour on
ignition in bulk) 1000
4.5 Mechanical Sensitivity to
4.5.1 Friction 1500
4.5.2 Impact 1500
4.6 Determination of strength by ballistic 5000
mortar
4.7 Cap Sensitivity 1500
4.8 Performance Test 1500
4.9 Any additional test as per BIS specification 500
5 Safety fuse or Micro cord fuse 6(1) 5.1 Physical Properties (dimensions, 200
smoothness etc)
5.2 Chemical analysis of composition of core. 500
5.3 Stability Test 500
(Determination of stability after subjecting
to such varying environmental conditions
as would tend to produce spontaneous
ignition or variation in sensitivity of an
explosive)
5.4 Burning Rate 200
5.5 Water Immersion Test 200
5.6 Lateral Transmission Test 500
5.7 Any additional test as per BIS specification 500
6 Detonating Fuse 6(2) 6.1 Physical Properties (dimensions, 200
smoothness, finishing, inspection of
foreign material, pinholes etc).
6.2 Chemical analysis of composition 1000
6.3 Stability Test (Determination of stability 1000
after subjecting to such varying environ-
mental conditions as would tend to
produce spontaneous ignition or variation
in sensitivity of an explosive)
6.4 Flexibility Test at Low and High Temperature 500
6.5 Water proofness Test 1000
6.6 Velocity of Detonation 2000
6.7 Transmission of detonation 1000
6.8 Determination of Core load 1000
6.9 Breaking load test 1000
6.10 Any additional test as per BIS specification 500
7. NONEL (Shock Tube) 6(2) 7.1 Physical examination (dimensions, 200
finishing, pinholes etc)
7.2 Detonator sensitivity test 1000
7.3 Detonating fuse sensitivity test 1000
7.4 Series test 1000
1 2 3 4 5
230 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
7.5 Parallel test 1000
7.6 Kninck and Knot test 1000
7.7 180o bend test 1000
7.8 Side initiation test
7.8.1 with another nonel tube 500
7.8.2 with detonating fuse 500
7.9 Tensile strength test 1000
7.10 Delay timings test
7.10.1 surface trunk line 500
7.10.2 down the hole line 500
7.10.3 velocity of detonation 2000
7.11 Any additional test as per BIS specification 500
Sr. Name/Type of Class/Div Tests to be conducted Ordinary Electric Delay
No. explosive detonator detonator detonator
8. Detonator 6(3) 8.1 Physical Examination (Dimensions, 200 200 200
Finishing etc.)
8.2 Water Resistance -- 500 500
8.3 Drop Test 500 500 500
8.4 Snatch Test -- 500 500
8.5 Vibration Test 500 500 500
8.6 Strength Test 2000 2000 2000
8.7 Electric Resistance -- 500 500
8.8 No Fire Current Test -- 1000 1000
8.9 Delay Time Test -- -- 1000
8.10 Minimum Series Firing Current Test -- 1000 1000
8.11 Any additional test as per BIS specification 500 500 500
9. Fireworks 7(2) 9.1 Test for Sound level 200
7(3)
or 9.2 All other test (physical, chemical, performance etc.) 250
7(4) (consolidated)
D. The following fees shall be payable for testing of packages of explosives in the Departmental Testing Station
Sl Tests to be conducted Fees
No. (in rupees)
1 2 3
1. Bursting Strength of Paper or Paper Board 325
2. Burst Factor 400
3. Compression Strength 650
4. Drop Test 650
5. Exudation Test (For Bitumen / Pitch Coal tar impregnated Paper) 350
1 2 3 4 5
¹Hkkx II¹[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 231
6. Grammage of Paper 300
Grammage for 3 Ply 350
Grammage for 5 Ply 400
Grammage for 7 Ply 550
7. Inclined Impact Test 550
8. Observations on CFB Box Style, No. of Plies, No. of Joints and external defects 325
9. Dimension of carton / box, per dimension 300
10. Puncture Resistance 325
11. Rain Test 550
12. Scuff Proofness 400
13. Stack Load Test 550
14. Cobb Test 350
15. Studies on the effect of humidity and temperature on filled (dummy) package 5000
16. Tensile Strength and % elongation for Paper and paper board 400
17. Tear Factor 400
18. Tests as per IMDG Code
1. IMDG Testing(drop test and stack load test) 2350
2. Dimensions (3) 600
3. Bursting Strength 325
4. Cobb Test 350
5. Scuff Proof ness Test 400
19. Tests as per UN Recommendations on Transport of Dangerous Goods for classification
Series -1 and 2
1. UN Gap test 5,000
2. Koenen test 5,000
3. Time/Pressure test 5,000
4. Internal ignition test 5,000
Series- 3
1. Impact sensitivity test 5,000
2. Friction sensitivity test 5,000
3. Thermal stability test 20,000
4. Small scale burning test 5,000
Series-4
1. Thermal Stability Test at 75oC 20,000
2. Drop Test 10,000
Series-5
1. Cap sensitivity test 5,000
2. Deflagration to detonation test 10,000
3. External fire test for Division 1.5 45,000
Series - 6
1. Single Package Test 10,000
2. Stack Test 10,000
3. External Fire (Bonfire) Test 45,000
1 2 3
232 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Schedule -V
(See rule 113)
Part-1
APPLICATION FORMS
Previous and next
Questions people ask
Is form LE-3 issued by District Magistrate of the Explosives Rules, 2008 still in force?
No repeal of the Explosives Rules, 2008 is recorded.