Rule 9, Fruits and Vegetables Grading and Marking Rules, 2004: Special conditions of certificate of authorisation
Fruits and Vegetables Grading and Marking Rules, 2004 - Rule 9
Text of rule 9
Special conditions of certificate of authorisation
9. Special conditions of certificate of authorisation:-In addition to the conditions
specified under sub-rule (8)of the rule 3 of the General Grading and Marking
Rules, 1988, every authorised packer shall follow all instructions prescribed by
Agricultural Marketing Adviser from time to time.
SCHEDULE-I
(See rule 3 )
(Design of Agmark insignia)
Name of Commodity :
Grade :
TOP
SCHEDULE - II
GRADE DESIGNATION AND QUALITY OF TABLE GRAPES
1. Table Grapes shall be fruits obtained from varieties(cultivars) of Vitis vinifera L.
2. MINIMUM REQUIREMENTS:
(i) Bunches and berries of Table grapes shall be:
(a) clean, sound, free of any visible foreign matter;
(b) free of pests, affecting the general appearance of the produce;
http://agmarknet.nic.in/fveggmrules04.htm#main
(c) free of damage caused by pests or diseases;
(d) free of abnormal external moisture;
(e) free of any foreign smell and/or taste;
(f) free of all visible traces of moulds;
(ii) Berries shall be intact, well formed and normally developed;
(iii) Table grapes shall comply with the residue levels of heavy metals, pesticides
and other food safety parameters as laid down by the Codex Alimentarius
Commission for Exports.
(iv) Table grapes shall have minimum soluble solids of 16 degrees Brix.
(v) Table grapes shall have minimum sugar/ acid ratio of 20:1.
Foot Note : Pigmentation due to sun is not a defect.
3. CRITERIA FOR GRADE DESIGNATION:
Grade
designation
Grade Requirements
Provision
concerning
sizing
Grade tolerances
1 2 3 4
Extra class Grapes must be of
superior quality. The
bunches must be typical
of variety in shape,
development and
colouring and have no
defects. Berries nust be
firm, firmly attached to
the stalk, evenly spaced
along the stalk and have
their bloom virtually
intact.
As per
table`A’
5% by weight of
bunches not
satisfying the
requirements for the
grade, but meeting
those of Class I grade
or exceptionally
coming within the
tolerances of that
grade.
Class I Grapes must be of good
quality. The bunches
must be typical of variety
in shape, development
and colouring. Berries
must be firm, firmly
attached to the stalk and,
as far as possible, have
their gloom intact. The
may, however, be less
evenly spaced along the
stalk than in the extra
class. Following slight
defects may be there,
provided these do not
affect the general
appearance of the
produce and keeping
quality of the package.
- a slight defect in shape,
- a slight defect in
colouring
- do - 10% by weight of
bunches not
satisfying the
requirements for the
grade, but meeting
those of Class II
grade or exceptionally
coming within the
tolerances of that
grade.
Class II The bunches may show
defects in shape,
development and
colouring provided these
do not impair the
essential characteristics
- do - 10% by weight of
bunches and
satisfying the
requirements of the
grade, but meeting
the minimum
of the variety. The
berries must be
sufficiently firm and
sufficiently attached.
They may be less evenly
spaced along the stalk
than Class I grade.
Following defects may be
there, provided these do
not affect the general
appearance of the
produce and keeping
quality of the package.
- defects in shape,
- defects in colouring,
- slight sun scorch
affecting the skin
only,
- slight bruising,
- slight skin defects.
requirements.
4. OTHER REQUIREMENTS:
(i) Grapes must have been carefully picked and have reached an
appropriate degree of development and ripeness in accordance with
criteria proper to the variety and/or commercial type and to the area in
which they are grown. The Development and condition of the Grapes
must be such as to enable them;
to withstand transport and handling, and
to arrive in satisfactory condition at the place of destination.
TABLE `A'
--------
PROVISIONS CONCERNING SIZING
Size is determined by the weight of bunches(in gms.) The following minimum (in
gms.) requirements per bunch are laid down for large and small berries grapes.
________________________________________________
Grade Large berries Small berries
________________________________________________
Extra class 200 150
Class I 150 100
Class II 100 75
_________________________________________________
SIZE TOLERANCE:
Extra class, Class I, Class II : 10 % by weight of bunches not satisfying the size
requirements for the grade, but meeting the size requirements for the grade
immediately below.
TOP
SCHEDULE - III
GRADE DESIGNATION AND QUALITY OF LITCHI
1. Litchis shall be fruit obtained from Varieties (cultivars) of litchi chinensis Sann.
of Sapindaceae family;
2. MINIMUM REQUIREMENTS-
(i) Litchi shall be:-
(a) whole, sound, fresh in appearance;
(b) clean, free of any visible foreign matter;
(c) free of pests affecting the general appearance of the produce;
(d) free of damage caused by pests;
(e) free of abnormal external moisture excluding condensation following
removal from cold storage;
(f) free of any foreign smell and/or taste;
http://agmarknet.nic.in/fveggmrules04.htm#main
(g) free of damage and abrasion;
(h) free of brown markings;
(ii) Litchis shall have minimum equatorial diameter of 23 mm.
(iii) Litchis shall comply with the residue levels of heavy metals, pesticides and
other food safety parameters as laid down by the Codex Alimentarius
Commission for exports.
3. CRITERIA FOR GRADE DESIGNATION:
Grade designation
Grade Requirements
Grade tolerances
1 2 3
Extra class Litchis must be of superior quality.
They must have the shape,
development and colouring that
are typical of the variety and/or
varietal type. They must be free of
defects, with the exception of very
slight superficial defects, provided
these do not affect the general
appearance of the produce, the
quality, the keeping quality and
presentation in the package.
5% by number or weight
of Litchis not satisfying
the requirements for the
grade, but meeting those
of Class I grade or
exceptionally coming
within the tolerances of
that grade.
Class I Litchis must be of good quality.
They must be characteristic of the
variety and/or commercial type.
The following slight defects
however may be allowed provided
10% by number or
weight of Litchis not
satisfying the
requirements of the
grade, but meeting those
these do not affect the general
appearance of the produce, the
quality, the keeping quality and
presentation in the package.
- slight defects in shape
- slight defects in colouring;
- slight skin defects
Provided these do not exceed a
total area of 0.25 sq.cm.
of Class II grade or,
exceptionally coming
within the tolerances of
that grade.
Class II This grade includes Litchis which
do not quality for inclusion in the
higher grades, but satisfy the
minimum requirements specified in
general characteristics. The
following defects may be allowed,
provided, the Litchis retain their
essential characteristics as
regards the quality, the keeping
quality and presentation.
- defects in shape,
- defects in colouring,
- skin blemishes provided these
do not exceed a total area of
0.5 sq. cm.
10% by number or
weight of Litchis not
satisfying the
requirements of the
grade, but meeting the
minimum requirements.
4. OTHER REQUIREMENTS:
(i) Lichis shall be carefully picked and must be sufficiently developed and
matured. The development and condition of the Litchis must be such as to enable
them;
- to withstand transport and handling, and
- to arrive in satisfactory condition at the place of destination.
(ii) Litchis shall be presented under one of the following forms;
(a) Individually ----- In this case the pedicel must be cut at the first knot and
the maximum length of the stalk must not extend more than 2
mm. beyond the top of the fruit. Litchis in special grade must
be presented individually.
(b) In bunches ----- In this case the bunch must include more than three
attached and well formed Litchis. The branch
must not exceed 15 cm. in length.
5. PROVISIONS CONCERNING SIZING:-
_________________________________________
Grade Maximum equatorial
diameter ( in mm.)
(minimum)
________________________________________
Extra class 33
Class-I 28
Class-II 23
___________________________________________
Foot note:1) A maximum size range of 10 mm. between fruits in each package is
permitted.
2) Size tolerance - For all grades, 10% by number or weight of litchis not
satisfying the requirements as regards the minimum size, provided,
however that the diameter is not less than 23 mm.
TOP
SCHEDULE - IV
GRADE DESIGNATION AND QUALITY OF MANGOES
1. Mangoes shall be fruits obtained from Varieties (cultivars) of plant Mangifera
indica L. of Anacardiaceae family.
2. MINIMUM REQUIREMENTS
http://agmarknet.nic.in/fveggmrules04.htm#main
(i) Mangoes shall be:-
(a) whole, firm, sound and fresh in appearance. Produce affected by rotting or
deterioration such as to make it unfit for consumption is excluded;
(b) clean, practically free of any visible foreign matter;
(c) free of black necrotic stains or trails;
(d) free of marked bruising;
(e) free of abnormal external moisture, excluding condensation following
removal from cold storage;
(f) free from damage caused by low/or high temperature;
(g) free of any foreign smell and/or taste;
(h) free of damage caused by pests;
(i) sufficiently developed and display satisfactory ripeness;
(ii) When a peduncle is present, it shall not be no longer than 1.0 cm.
(iii) Mangoes shall comply with the residue levels of heavy metals, pesticides and
other food safety parameters as laid down by the Codex Alimentarius
Commission for exports.
Grade designation
Grade Requirements
Grade tolerances
1 2 3
Extra class Mangoes must be of superior
quality. They must be
characteristic of the variety.
They must be free of defects,
with the exception of very slight
superficial defects, provided
these do not affect the general
appearances of the produce, the
quality, the keeping quality and
presentation in the package.
5% by number or weight of
mangoes not satisfying the
requirements for the grade,
but meeting those of Class I
or exceptionally, coming
within the tolerances of that
grade.
Class I Mangoes must be of good
quality. They must be
characteristic of the variety.
Mangoes may have following
slight defects, provided these do
not affect the general
appearance of the produce, the
quality, the keeping quality and
presentation in the package.
- slight defects in shape;
- slight skin defects due to
rubbing or sunburn,
suberized stains due to resin
exudation (elongated trails
included) and healed bruises
not exceeding 2,3,4,5 sq. cm.
for size groups A, B, C, D
respectively
10% by number or weight of
mangoes not satisfying the
requirements for the grade,
but meeting those of Class II
grade or, exceptionally
coming within the tolerances
of that grade.
Class II This grade includes mangoes
which do not qualify for inclusion
in the higher grades, but satisfy
the minimum requirements.
Mangoes may have following
defects, provided they retain
their essential characteristics as
regards the quality, keeping
quality and presentation.
- defects in shape,
- slight skin defects due to
rubbing or sunburn,
suberized stains due to resin
exudation (elongated trails
included) and healed bruises
not exceeding 4,5,6,7 sq. cm.
for size groups A, B, C, D
respectively
10% by number or weight of
mangoes not satisfying the
requirements of the grade,
but meeting the minimum
requirements.
Foot note : In Class I and Class II, scattered suberized rusty lenticels,
as well as yellowing of green varieties due to exposure to direct
sunlight, not exceeding 40% of the surface and not showing any signs
of necrosis are allowed.
4. OTHER REQUIREMENTS
The development and condition of the mangoes must be such as to enable them:
- to ensure a continuation of the maturation process until they reach the
appropriate degree of maturity
corresponding to the varietal characteristics,
- to withstand transport and handling, and
- to arrive in satisfactory condition at the place of destination.
5. PROVISIONS CONCERNING SIZING
Size is determined by the weight of the fruit, in accordance with the following
table:
___________________________________________________________________
___
Size Weight Maximum permissible difference
Code (in grams) between
fruits within the
package(in grams)
___________________________________________________________________
___
A 100-200 50
B 201-350 75
C 351-550 100
D 551-800 125
___________________________________________________________________
_____
Size Tolerances:
For all grades, 10% by number or weight of mangoes in each package are permitted
to be outside (above or below) the group size range by 50% of the maximum
permissible difference for the group. In the smallest size range, mangoes must not
be less than 90 gms. and for those in the largest size range a maximum of 925
grams applies, as follows:
___________________________________________________________________
_
Size Normal size Permissible Max. permissible
code range size range. difference between
(10% of fruit/ fruit in each package
package exceed-
ing the normal
size range).
___________________________________________________________________
__
A 100-200 90-220
50.0
B 201-350 180-425
112.5
C 351-550 251-650
150
D 551-800 426-925
187.5
___________________________________________________________________
__
TOP
SCHEDULE - V
GRADE DESIGNATION AND QUALITY OF POMEGRANATE
1. Pomegranates shall be fruits obtained from Varieties (cultivars) of plant Punica
granatum L. of Puniaceae family;
2. MINIMUM REQUIREMENTS:
(i) Pomegranates shall be :
(a) fresh in appearance;
(b) mature and solid in feel;
(c) clean, free from any visible foreign matter;
(d) free from pests affecting the general appearance of the produce;
http://agmarknet.nic.in/fveggmrules04.htm#main
(e) free of damage caused by pests;
(f) free of cracking of skin, mechanical injury/rubbing, staining;
(g) free of abnormal external moisture excluding condensation following
removal from cold storage;
(h) free of any foreign smell or taste;
(i) free of any pronounced blemishes;
(ii) Pomegranates should not be affected by rotting or deterioration such as to make
it unfit for consumption.
(iii) Pomegranates shall comply with the residue levels of heavy metals, pesticides
and other food safety parameters as laid down by the Codex Alimentarius
Commission for exports.
3. CRITERIA FOR GRADE DESIGNATION:
Grade designation
Grade Requirements
Grade tolerances
1 2 3
Extra class Pomegranates must be of 5% by number or weight
superior quality. They must have
the shape, development and
colouring that are typical of the
variety and/or commercial type.
They must be free of defects, with
the exception of very slight
superficial defects, provided these
do not affect the general
appearance of the produce, the
quality, the keeping quality and
presentation in the package.
of pomegranate not
satisfying the
requirements for the
grade, but meeting those
of Class I grade or
exceptionally coming
within the tolerances of
that grade.
Class I Pomegranates must be of good
quality. They must be
characteristics of the variety and/or
commercial type. The following
slight defects provided these do
not affect the general appearance
of the produce, the quality, the
keeping quality and presentation in
the package.
- slight defects in shape
- slight defects in colouring;
- slight skin defects (i.e. scratches,
scars, scraps and blemishes)
provided these do not exceed 5%
of the total surface area.
10% by number or
weight of Pomegranate
not satisfying the
requirements of the
grade, but meeting those
of Class II or,
exceptionally coming
within the tolerances of
that grade.
Class II This grade includes Pomegranates
which do not quality for inclusion in
the higher grades, but satisfy the
minimum requirements.
Following defects may be there
provided the Pomegranates retain
their essential characteristics as
regards the quality, the keeping
quality and presentation.
- defects in shape,
- defects in colouring,
- skin defects(scratches, scars,
scrapes and blemishes)
provided these do not exceed
10% by number or
weight of Pomegranates
not satisfying the
requirements of the
grade, but meeting the
minimum requirements.
10% of total surface area.
4. OTHER REQUIREMENTS
Pomegranates must be carefully picked and have reached an appropriate
degree of development and ripeness in accordance with criteria proper to
the
variety and/or commercial type and to the area in which they are grown. The
development and condition of the Pomegranate must be such as to enable
them;
- to withstand transport and handling, and
- to arrive in satisfactory condition at the place of destination.
5. PROVISIONS CONCERNING SIZING
Size is determined by the weight or maximum diameter of the equatorial section
of the fruit, in accordance with the following table:
___________________________________________________________________
___
Size code Weight in grams Diamater in mm.
(minimum) (minimum)
___________________________________________________________________
___
A 400 90
B 350 80
C 300 70
D 250 60
E 200 50
___________________________________________________________________
____
Size tolerance:
(i) For all grades, 10% by number or weight of pomegranate corresponding to the
size immediately above and/or below than indicated on the package.
(ii)The maximum size range of 8 mm. between fruit in each package is permitted.
TOP
SCHEDULE - VI
GRADE DESIGNATION AND QUALITY OF PINEAPPLE
http://agmarknet.nic.in/fveggmrules04.htm#main
1. Pineapple shall be fruit obtained from Varieties (cultivars) of plant Ananas
comosus (L) Merry. of Bromeliaceae family;
2. MINIMUM REQUIREMENTS
(i) Pineapple shall be:
(a) whole, with or without the crown, fresh in appearance;
(b) Crown when present, shall be free of dead or dried leaves;
(c) clean, sound, free of any visible foreign matter, free of internal browning,
free from pests affecting the general appearance of the produce.
(d) free of damage caused by pests;
(e) free of abnormal external moisture, excluding condensation following
removal from cold storage;
(f) free of any foreign smell and/or taste;
(g) free of pronounced blemishes;
(h) free of damage caused by low and/or high temperature;
(ii) Pineapples shall comply with the residue levels of heavy metals, Pesticides
and other food safety parameters as laid down by the Codex Alimentarius
Commission for exports.
3. CRITERIA FOR GRADE DESIGNATION:
Grade
designation
Grade Requirements
Total soluble
solids in Brix
degrees
(Minimum)
Grade tolerances
1 2 3 4
Extra class Pineapples must be of
superior quality. They
must be characteristic of
variety and/or
commercial type. They
must be free of defects.
Very slight superficial
defects may be there,
provided these do not
affect general
appearance of the
produce, the quality, the
keeping quality and
presentation in the
package. The crown, if
present, shall be simple
and straight with no
sprouts and shall be
between 50 and 150% of
the length of the fruit
with trimmed or
untrimmed* crowns.
12 5% by number or
weight of
Pineapples not
satisfying the
requirements of the
grade, but meeting
of those of Class I
grade or,
exceptionally
coming within the
tolerances of that
grade.
Class I Pineapples must be of 12 10% by number or
good quality. They must
be characteristics of the
variety and/or
commercial type. The
following slight defects
however, may be
allowed, provided these
do not affect the general
appearance of the
produce, the quality, the
keeping quality and
presentation in the
package.
- slight defects in shape
- slight defects in
colouring; including
sunspots;
- slight skin defects (i.e.
scratches, scars, scraps
and blemishes) not
exceeding 4% of the
total surface area.
The defects must not, in
any case, affect the pulp
of the fruit.
The crown, if present
shall be simple and
straight and slightly
curved with no sprouts,
and shall be between 50
and 150% of the length
of the fruit for pineapples
with trimmed or
untrimmed crowns.
weight of
Pineapples not
satisfying the
requirements of the
grade, but meeting
those of class II
grade or
exceptionally,
coming within the
tolerance of that
grade.
Class II Pineapples which do
not qualify for inclusion
in the higher grades, but
satisfy the minimum
12 10% by number or
weight of
Pineapples not
satisfying the
requirements of the
requirements.
The following defects
may be allowed,
provided the pineapples
retain their essential
characteristics as
regards the general
appearance, quality, the
keeping quality and
presentation
- defects in shape,
- defects in colouring;
including sunspots;
- skin
defects(scratches,
scars, bruises and
blemishes) not
exceeding 8% of the
total surface area.
The defects must not, in
any case, affect the pulp
of the fruit.
The crown, if present,
shall be simple or double
and straight or slightly
curved, with no sprouts.
grade but meeting
the minimum
requirements.
4. OTHER REQUIREMENTS
(i) Pineapples must have been carefully picked and have reached an appropriate
degree of development and ripeness in accordance with criteria proper to
the
variety and/or commercial type and to the area in which they are grown. The
development and condition of the pineapples must be such as to enable
them;
- to withstand transport and handling, and
- to arrive in satisfactory condition at the place of destination.
(ii) When peduncle is present, it shall be no longer than 2.0 cm. and the cut must be
transversal, straight and clean. The fruit must be physiologically ripe i.e.
without evidence of unripeness (opaque, flavourless, exceedingly porus flesh) or
over ripeness (exceedingly transulent or fermented flesh).
* Trimming consists in tearing some leaves off the top of the crown.
5. PROVISIONS CONCERNING SIZING
Size is determined by the average weight of the fruit with a minimum weight of
700 g. except for small size varieties (such as victoria and queen) which can
have a minimum weight of 250 g. in accordance with the following table:
___________________________________________________________
Size Code Average weight(+ or -12%)
(in grams)
__________________________
with crown without crown
___________________________________________________________
A 2750 2280
B 2300 1910
C 1900 1580
D 1600 1330
E 1400 1160
F 1200 1000
G 1000 830
H 700 560
I <700 <560
____________________________________________________________
SIZE TOLERANCE:
For all classes, 10% by number or weight of pineapples corresponding to the
size immediately above and/or below that indicated on the package.
TOP
SCHEDULE - VII
GRADE DESIGNATION AND QUALITY OF GUAVAS
1. Guavas shall be fruits obtained from plant Psidium guajava (L) of Myrtaceae
family.
2. MINIMUM REQUIREMENTS
(i) Guavas shall be:
(a) whole, firm, sound and clean;
(b) free from any visible foreign matter;
(c) practically free from bruising;
(d) free of pests affecting the general appearance of the produce;
(e) free of damage caused by pests;
http://agmarknet.nic.in/fveggmrules04.htm#main
(f) free of abnormal external moisture, excluding condensation following
removal from cold storage;
(g) free of any foreign smell and/or taste;
(ii) Guava shall comply with the residue levels of heavy metals, Pesticides and
other food safety parameters as laid down by the Codex Alimentarius
Commission for exports.
3.CRITERIA FOR GRADE DESIGNATION
Grade
designation
Grade Requirements
Grade tolerances
1 2 3
Extra class Guavas must be of superior
quality. They must be
characteristic of variety and/or
commercial type. They must be
free of defects. Very slight
superficial defects may be there,
provided these do not affect
general appearance of the
produce, the quality, the keeping
quality and presentation in the
package.
5% by number or weight of
guavas not satisfying the
requirements of the grade,
but meeting those of Class I
grade or, exceptionally
coming within the tolerances
of that grade.
Class I Guavas must be of good quality.
They must be characteristics of the
variety and/or commercial type.
Following slight defects however,
may be allowed, provided these do
not affect the general appearance
of the produce, the quality, the
keeping quality and presentation in
10% by number or weight of
guavas not satisfying the
requirements of the grade,
but meeting those of class II
grade or exceptionally,
coming within the tolerance
of that grade.
the package.
- slight defects in shape and
colour;
- slight skin defects due to rubbing
and other superficial defects such
as sunburns, blemishes and scars
not exceeding 5% of the total
surface area,
The defects should not affect the
pulp of the fruit.
Class II This grade includes guavas which
do not quality for inclusion in the
higher grades, but satisfy the
minimum requirements.
Following defects may be there,
provided the guavas retain their
essential characteristics as regards
the general appearance, quality,
the keeping quality and
presentation;
- defects in shape and colour;
- skin defects due to rubbing and
other defects such as
sunburns, blemishes and scars
not exceeding 10% of the total
surface area.
The defects should not affect the
pulp of the fruit.
10% by number or weight of
guavas not satisfying the
requirements of the grade but
meeting the minimum
requirements with the
exception of produce affected
by rotting or any other
deterioration rendering it unfit
for consumption.
4. OTHER REQUIREMENTS
The guavas must have been carefully picked and have reached an appropriate
degree of development and ripeness in accordance with criteria proper to the
variety and to the area in which they are grown. The development and
condition of the guavas must be such as to enable them;
- to withstand transport and handling, and
- to arrive in satisfactory condition at the place of destination.
5. PROVISIONS CONCERNING SIZING
Size is determined by the weight or maximum diameter of the equatorial section
of the fruit, in accordance with the following table:
_________________________________________________________
Size Code Weight Diameter
(in grams) (in millimeters)
___________________________________________________________
A >350
>95
B 251-350 86-95
C 201-250 76-85
D 151-200 66-75
E 101-150 54-65
F 61-100 43-53
___________________________________________________________
SIZE TOLERANCES:
For all grades, 10% by number or weight of guavas corresponding to the size
immediately above and/or below that indicated on the package.
TOP
SCHEDULE - VIII
GRADE DESIGNATION AND QUALITY OF SHELLING PEAS
1. Shelling peas shall be obtained from varieties (cultivars) of Pisum sativum L.
http://agmarknet.nic.in/fveggmrules04.htm#main
2. MINIMUM REQUIREMENTS
(i). The pods shall be -
(a) intact and sound;
(b) clean, free of any visible foreign matter including parts of the flowers;
(c) fresh in appearance;
(d) free from pests and damage caused by pests;
(e) free from abnormal external moisture;
(f) free from foreign smell and/or taste;
(ii) The seeds shall be :-
(a) fresh;
(b) sound;
(c) normally developed;
(d) free from pests and damage caused by pests;
(e) free from foreign smell and/or taste;
(iii) Pods and seeds shall not be affected by rotting or deterioration such as to make
it unfit for consumption.
(iv) They shall comply with the residue levels of heavy metals, pesticides and other
food safety parameters as laid down by the Codex Alimentarius Commission
for exports.
3. CRITERIA FOR GRADE DESIGNATION
Grade
designation
Grade Requirements
Provision
concerning
sizing
Grade tolerances
1 2 3 4
Extra class Shelling peas shall be of
good quality. They must
be characteristic of
variety and/or
commercial type.
The pods shall be:-
- fresh and turgid;
- free from damage
caused by hail;
- free from damage
caused by heating;
- with peduncles
attached; if removed
it should be neatly
cut;
- well filled containing
at least five seeds.
The seeds shall be:-
- well formed;
- tender;
- succulent and
sufficiently firm, they
should become flat
without disintegrating
Not required 5% by weight of peas
not satisfying the
requirements, but
meeting those of
Class I grade.
when squeezed
between to fingers;
- at least half of the full
grown size but not full
grown;
- non;-farinaceous;
- undamaged without
cracks in the skin of
the seeds.
Class I Shelling peas shall be of
good quality. They must
be characteristic of the
variety and/or
commercial type.
The pods shall be:-
- fresh and turgid;
- free from damage
cuased by hail;
- free from damage
caused by heating;
- with peduncles
attached, if removed
it should be neatly
cut;
- well filled contining at
least five seeds.
The seeds shall be:-
- well formed;
- tender;
- succulent and
sufficiently firm, they
should become flat
without disintegrating
when squeezed
Not required 10% by weight of
peas not satisfying
the requirements,
but meeting those
of class I grade.
between to fingers;
- at least half of the full
grown size but not full
grown;
- non-farinacious;
- undamaged without
cracks in the skin of
the seeds.
Class II The pods -
- shall be fresh and
turgid;
- with peduncle
attached; if removed
it should be neatly
cut;
- shall contain atleast
three seeds;
- may be riper than
those in Extra class
grade, over mature
pods are to be
excluded, the pods
may have following
defects; provided
they retain their
essential
characteristics as
regards the quality,
the keeping quality
and presentation;
- slight skin defects,
injuries & bruises
provided they are not
progressive and there
is no risk of the seeds
being affected;
- slight defects in
shape;
Not required 10% by weight of
peas not satisfying
the requirements of
the grade but meeting
the minimum
requirements.
- slight defects in
colouring;
- some loss of
freshness.
Seeds may have-
- slight defects in
shape;
- slight defects in
colouring;
- slightly harder;
- slightly damaged.
4. OTHER REQUIREMENTS
(i). The peas shall be sufficiently developed and conditions shall be such as to
enable them:
- to withstand transport of handling, and
- to arrive in satisfactory condition at the place of destination.
(ii). Seeds if graded and packed separately, shall be marked " Pea seeds".
TOP
SCHEDULE - IX
http://agmarknet.nic.in/fveggmrules04.htm#main
GRADE DESIGNATION AND QUALITY OF MANGETOUT (SNOW PEAS) AND
SUGAR SNAP PEAS
1. The Mangetout(Snow peas) and sugar snap peas shall be obtained from varieties
(cultivars) of Pisum sativum L.
2. MINIMUM REQUIREMENTS
(i) The pods shall be -
(a) intact and sound;
(b) clean, free of any visible foreign matter including parts of the flower;
(c) free from hard filaments or films;
(d) free from abnormal external moisture;
(e) free from pest and damage caused by pests;
(f) free of any foreign smell and/or taste;
(ii) The pods shall not be affected by rotting or deterioration such as to make it unfit
for consumption.
(iii) Mangetout (snow peas) and sugar snap peas shall comply with the residue
levels of heavy metals, pesticides and other food safety parameters as laid down
by the Codex Alimentarius Commission for exports.
3. CRITERIA FOR GRADE DESIGNATION
Grade
designation
Grade Requirements
Provision
concerning
sizing
Grade tolerances
1 2 3 4
Extra class The peas shall be of
good quality. They must
be characteristic of
variety and/or
commercial type. The
seeds if present shall be
small and undeveloped.
The pods shall be:-
- characteristics of the
variety in shape, size
and colouring;
- free and turgid;
- with peduncles
attached; if removed
it should be neatly
cut;
- free from damage by
hail;
- free from damage
caused by heating;
Not required 5% by weight of peas
not satisfying the
requirements of the
grade, but meeting
those of Class I
grade.
Class I The peas shall be of
good quality. They must
be characteristic of the
variety and/or
commercial type. The
seeds if present shall be
small and undeveloped.
Not required 10% by weight of
peas not satisfying
the requirements,
but meeting those
of class II grade.
The pods shall be:-
- characteristics of the
variety in shape, size
and colouring;
- fresh and turgid;
- with peduncles
attached, if removed
it should be neatly
cut;
- free from damage
caused by hail;
- free from damage
caused by heating;
Class II This grade includes
peas; which do not
qualify for inclusion in
Class I grade but satisfy
the minimum
requirements. The
seeds, if present, can be
slightly more developed
than Extra class.
- The following defects
of the pods may be
allowed provided the
peas retain their
essential
characteristics as
regards the quality,
the keeping quality
and presentation:-
- slight skin defects,
injuries bruises;
- slight defects in
shape; including
those due to the seed
formation;
- slight defects in
Not required 10% by weight of
peas not satisfying
the requirements of
the grade but meeting
the minimum
requirements.
colouring;
- some loss of
freshness excluding
wilted and
uncoloured pods.
4. OTHER REQUIREMENTS
(i) The pods shall be sufficiently developed and condition shall be such as to
enable them:-
- to withstand transport and handling, and
- to arrive in satisfactory condition at the place of destination.
(ii) Package shall be marked "trimmed", `topped' or other indications for peas that
have their peduncle and/or blossom end removed, where appropriate.
TOP
SCHEDULE - X
GRADE DESIGNATION AND QUALITY OF RIBBED CELERY
1. Ribbed celery shall be obtained from Varieties (cultivars) Apium graveolens L. var.
dulce Mill;
http://agmarknet.nic.in/fveggmrules04.htm#main
2. MINIMUM REQUIREMENT
(i) Ribbed celery shall be -
(a) fresh in appearance;
(b) clean and free of any visible foreign matter;
(c) free from damage caused by frost;
(d) free from cavities, suckers and flower stems;
(e) free from pests and damage caused by pests;
(f) free of excessive external moisture, properly dried if washed;
(g) free of any foreign smell and/or taste;
(ii) Whole, upper part of it may be trimmed.
(iii) It shall not be rotten or deteriorated so as to make it unfit for consumption;
(iv) It shall be normally developed, having regard to the production period.
(v) Main root should not exceed 5 cm in length and should be well cleaned.
(vi) Ribbed Celery shall comply with the residue levels of heavy metals, pesticides
and other food safety parameters as laid down by the Codex Alimentarius
Commision for exports.
3. CRITERIA FOR GRADE DESIGNATION:
Grade
designation
Grade Requirements
Provision
concerning
sizing
Grade tolerances
1 2 3 4
Extra class Ribbed celery shall be of
quality, in shape and free of
traces of disease on leaves
and leaf stalks. The leaf
stalk shall not be broken,
stringy, crushed or split. In
the case of balanced ribbed
celery, the leaf stalk shall be
white to yellowish white or
greenish white in colour for
atleast half of their length.
As per
Table ‘A’
5% by number of ribbed
celery not satisfying
the requirements of the
grade, but meeting the
requirements for Class I
grade.
Class I Ribbed celery must be of
good quality, regular in
shape and free of traces of
disease on leaves and leaf
stalks. The leaf stalk shall
not be broken, stringy,
crushed or split. In the case
of blanched ribbed celery,
the leaf stalk shall be white
to yellowish white or
greenish white in colour for
As per
Table ‘A’
10% by number of
ribbed celery not
satisfying the
requirements of the
grade, but meeting the
requirements for Class
II grade.
atleast half of their length.
Class II Ribbed celery in this grade
may have slight traces of
rust, deformation or slight
bruises and have not more
than two leaf stalk that are
broken, crushed or split. In
the case of blanched ribbed
celery, the leaf stalk shall be
white to yellowish white or
greenish white in colour for
atleast one third of their
length.
As per
Table ‘A’
10% by number of
ribbed celery not
satisfying the
requirements of the
grade but meeting the
minimum requirements.
4. OTHER REQUIREMENTS -
(i) It's condition shall be such as to allow it –
- to withstand transport and handling, and
- to arrive in satisfactory condition at the place of destination.
(ii) The ribbed celery may be presented-
- either bundled in the package,
- or stacked in the package.
When presented in bundles, all bundles in the same package shall have the same
number of pieces.
(iii) The content of each package shall be uniform and comprise only ribbed celery of
the same origin, quality, colour and size.
Table `A'
Provisions concerning sizing
Size is determined in relation to net weight. The minimum weight of ribbed celery
shall be 150 gms.
______________________________________________________________
Size Code Weight in gms. Difference in
size in the same package
(max.)
______________________________________________________________
A 150 - 500 100
B 501 - 800 150
C over 800 gms. 200
________________________________________________________________
Size Tolerance- for all grades, 10% by number of ribbed celery not confirming to size
requirements.
TOP
SCHEDULE - XI
GRADE DESIGNATION AND QUALITY OF SPINACH
1. Spinach shall be obtained from Varieties (cultivars) of Spinacia oleracea L.
2. MINIMUM REQUIREMENTS
(i) Spinach shall be -
(a) fresh in appearance,
(b) clean, free of visible foreign matter;
(c) free from pests and damage caused by pests;
(d) free of floral stems;
http://agmarknet.nic.in/fveggmrules04.htm#main
(e) free of any foreign smell and/or taste;
(f) properly drained if washed;
(ii) It shall not be affected by rotting or deterioration such as to make it unfit for
consumption.
(iii) In the case of spinach heads, the portion comprising of the root shall be cut close
to the base of the outer leaves.
(iv) Spinach shall comply with the residue levels of heavy metals, pesticides and
other food safety parameters as laid down by the Codex Alimentarius
Commissioin for exports.
3. CRITERIA FOR GRADE DESIGNATION
Grade
designation
Grade Requirements
Provision
concerning
sizing
Grade tolerances
1 2 3 4
Extra class Spinach shall be of good
quality. It may be in leaf or
in heads. The leaves shall
be
- normal in colour and
appearance for the
variety and time of
harvest;
Not
required
5% by weight of
Spinach not satisfying
the requirements for the
grade, but meeting the
requirements for Class I
grade.
- free from damage by
frost, animal parasites or
diseases impairing
appearance or edibility.
- In the case of leaf
spinach, the leaf stem
must not exceed 10 cm.
in length.
Class I Spinach shall be of good
quality. The leaves shall be
- normal in colour and
appearance for the
variety and time of
harvest;
- free from damage
caused by frost, animal
parasites or diseases
impairing appearance or
edibility.
- In the case of leaf
spinach, the leaf stem
must not exceed 10 cm.
in length.
Not
required
10% by weight of
spinach not satisfying
the requirements for the
grade, but meeting the
requirements for Class
II grade.
Class II Leaf spinach may have
slight defects in colour and
slight defects caused by
frost. However, it shall
satisfy the minimum
requirements.
Not
required
10% by weight of
spinach not satisfying
the requirements of the
grade but meeting the
minimum requirements.
In the case of spinach
heads, a tolerance of
10 % by weight of
heads, having roots
attached which do not
exceed 1cm in length
from the base of the
outer leaves may be
allowed.
4. OTHER REQUIREMENTS
(i) The Spinach shall be sufficiently developed and in such condition as to enable it:
- to withstand transport and handling, and
- to arrive in satisfactory condition at the place of destination.
(ii) Leaf spinach and spinach heads shall not be mixed in the same package.
(iii)Each package shall be marked `leaf spinach' or` spinach heads' as the case may
be.
TOP
SCHEDULE –XII
GRADE DESIGNATION AND QUALITY OF HEADED CABBAGES
1. Headed Cabbages shall be obtained from varieties (cultivars) of Brassica
oleracea L. var. capitata L. (including red cabbages and pointed cabbages) and
from Brassica oleracea L. var. bullata DC and var. sabauda L (savoy cabbages);
2. Minimum requirements:
http://agmarknet.nic.in/fveggmrules04.htm#main
(i) Headed Cabbages shall be
(a) fresh in appearance, sound and intact;
(b) free of bursts and showing no signs of flower development;
(c) free of bruises and injury;
(d) free of damage due to frost;
(e) free from pests and damage caused by pests;
(f) free of abnormal external moisture;
(g) free of any foreign smell and/or taste;
(ii) It shall not be rotten or deteriorated so as to make it unfit for consumption.
(iii) The stem should be cut slightly below the lowest point of leaf growth. Cut
should be clean and leaves should remain firmly attached.
(iv) Headed Cabbage shall comply with the residue levels of heavy metals,
pesticides and other food safety parameters as laid down by the Codex
Alimentarius Commission for exports.
3. CRITERIA FOR GRADE DESIGNATION
Grade
designation
Grade Requirements
Provision
concerning
sizing
Grade tolerances
1 2 3 4
Extra class Headed Cabbage shall be
of good quality and
possess all the
characteristics typical of the
variety, they should be
compact, having regard to
the species. Headed
Cabbages, according to the
variety, must have firmly
attached leaves. They
should be uniform in shape
and colour Store headed
cabbages may have some
of their outer leaves
removed. Green Savoy
headed cabbages and early
headed cabbages, taking
into account their variety,
must be properly trimmed,
but in doing so a number of
leaves may be left for
protection. They may have
following slight defects:-
- small cracks in the outer
leaves,
- slight bruising and light
trimming of the outer
leaves, provided that it
does not affect the good
condition of the produce.
Not
required
5% by number or
weight of headed
cabbages not satisfying
the requirements for
the grade, but meeting
the requirements for
Class I grade.
Class I Headed Cabbage shall be
of good quality and
possess all the
characteristics typical of the
Not
required
10% by number or
weight of headed
cabbages not satisfying
the requirements for
variety. They should be
compact, having regard to
the species. Headed
Cabbages, according to the
variety, must have firmly
attached leaves. They
should be uniform in shape
and colour Store headed
cabbages may have some
of their outer leaves
removed. Green Savoy
headed cabbages and early
headed cabbages, taking
into account their variety,
must be properly trimmed,
but in doing so a number of
leaves may be left for
protection. They may have
following slight defects:-
- small cracks in the outer
leaves,
- slight bruising and light
trimming of the outer
leaves, provided that it
does not affect the good
condition of the poduce.
the grade, but meeting
the requirements for
Class II grade.
Class II Headed Cabbage which do
not qualify for inclusion in
the Class I grade, but meet
the minimum requirements.
They may have following
defects.
- Cracks in the outer
leaves,
- More of the outer leaves
may be removed,
- Larger bruises and the
outer leaves may be
more extensively
trimmed,
- Less compact.
Not
required
10% by number or
weight of headed
cabbages not satisfying
the requirements of the
grade but meeting the
minimum requirements.
4. OTHER REQUIREMENTS:
Headed Cabbage must be such as to enable them .-
- to withstand transport and handling, and
- to arrive in satisfactory condition at the place of destination.
Table `A'
5. Provisions concerning sizing;
Size is determined in relation to net weight. The minimum weight of headed cabbage
shall not be less than 200 gms.
______________________________________
Size Code Weight in grms.
_______________________________________
A 201 - 600
B 601 - 1200
C 1201 and above
___________________________________________
Sizing is compulsory for headed cabbages presented in packages. In that case, the
weight of the heaviest head in any one package shall not be more than double
the weight of the lightest head.
Size Tolerance - For all classes 10% by number or weight of Headed Cabbages.
TOP
SCHEDULE – XIII
GRADE DESIGNATION AND QUALITY OF BRUSSELS SPROUTS
1. Brussel Sprouts shall be auxilary buds growing along the vertical stem of varieties
(cultivars) of Brassica oleracea L. var. bullata subazr. gemmifera DC.
2. MINIMUM REQUIREMENTS:
(i) Brussels Sprouts shall be
(a) intact;
http://agmarknet.nic.in/fveggmrules04.htm#main
(b) sound, fresh in appearance;
(c) clean, free of any visible foreign matter;
(d) not frozen;
(e) free from damage caused by pests;
(f) free of insects and/or other parasites;
(g) free of abnormal external moisture;
(h) free of any foreign smell and/or taste;
(ii) The stalk of trimmed Brussels Sprouts must be cut just beneath the outer
leaves, the stalk of untrimmed Brussels sprouts must be fractured at the
base; the cut or fracture must be clean, without other parts of the Plant
adhering.
(iii) Brussels Sprouts shall comply with the residue levels of heavy metals,
pesticides and other food safety parameters as laid down by the Codex
Alimentarius Commission for exports.
3. CRITERIA FOR GRADE DESIGNATION
Grade
designation
Grade Requirements
Provision
concerning
sizing
Grade tolerances
1 2 3 4
Extra class Brussels sprouts shall be
of superior quality.
They must be :
- firm
- closed
- free of damage by frost.
Trimmed Brussels sprouts
must be well coloured. For
untrimmed brussels sprouts,
slightly discoloured basal
leaves are allowed. Slight
damage to the outer leaves,
caused by picking, grading
or packing is also allowed,
provided that it does not
affect the good condition of
the produce.
5% by weight of
brussels sprouts not
satisfying the
requirements of the
grade, but meeting the
requirements for Class I
or exceptionally,
coming within the
tolerances for that
grade.
Class I Brussels sprouts shall be
of superior quality. They
must be :
- firm
- closed
- free of damage by frost.
Trimmed Brussels sprouts
must be well coloured. For
untrimmed brussels sprouts,
slightly discoloured basal
leaves are allowed. Slight
damage to the outer leaves,
10% by weight of
brussels sprouts not
satisfying the
requirements of the
grade, but meeting the
requirements for Class
II or exceptionally,
coming within the
tolerances for that
grade.
caused by picking, grading
or packing is also allowed,
provided that it does not
affect the good condition of
the produce.
Class II This grade includes
Brussels sprouts which does
not qualify for inclusion in
class I. Brussel sprouts
shall be of good quality.
Brussel sprouts in this class
may be:
- less firm
- less closed but not open
- may show slight damage
due to frost.
10% by weight of
brussels sprouts not
satisfying the
requirements of the
grade but meeting the
minimum requirements.
4. OTHER REQUIREMENTS
The conditions of the Brussels sprouts must be such as to allow them:
- to withstand transport and handling, and
- to arrive in satisfactory condition at the place of the destination.
5. PROVISION CONCERNING SIZING
Sizing is determined by the maximum diameter of the equatorial section.
The minimum diameter is
- 10 mm for trimmed Brussels sprouts graded in Extra class, Class I and Class
II.
- 15 mm for untrimmed Brussels sprouts graded in Extra class and Class I.
For Brussels sprouts in Extra class and Class I, the difference between the
largest and the smallest sprout in any one package must not exceed 20
mm.
TOP
SCHEDULE - XIV
GRADE DESIGNATION AND QUALITY OF TOMATOES
1. (i) Tomatoes shall be fruits obtained from varieties of Lycopersicum esculentum
Mill of the Solanaceae family.
(ii) Tomatoes may be classified into four commercial types :
- Round
- Ribbed
- Oblong or elongated
- Cherry tomatoes (including cocktail tomatoes)
2. MINIMUM REQUIREMENTS :
http://agmarknet.nic.in/fveggmrules04.htm#main
Tomatoes shall be
(i) (a) whole, sound and fresh in appearance;
(b) clean, free of any visible foreign matter;
(c) free of pests affecting the general appearance of the produce;
(d) free of damage caused by pests;
(e) free of abnormal moisture excluding condensation following removal
from cold storage;
(f) free of any foreign smell and/or taste;
(ii) In the case of trusses of tomatoes, the stalk must be fresh, healthy, clean and
free from all leaves and any visible foreign matter.
(iii) Tomatoes shall comply with the residue levels of heavy metals, Pesticides and
other food safety parameters as laid down by the Codex Alimentarius
Commission for exports.
3. CRITERIA FOR GRADE DESIGNATION:
Grade
designation
Grade Requirements
Provision
concerning
sizing
Grade tolerances
1 2 3 4
Extra class Tomatoes shall be of
superior quality. They shall
have firm fresh and must be
characteristics of the variety
as regards shape,
appearance and
development. They must be
free of green backs and
other defects. Very slight
superficial defects may be
there provided these do not
affect the general
appearance of the produce,
the quality, the keeping
quality and presentation in
the package.
5% by number or
weight of tomatoes
not satisfying the
requirements of the
grade, but meeting
those of Class I or
exceptionally, coming
within the tolerances
of that grade.
Class I Tomatoes shall be of good
quality. They shall have
reasonably firm flesh and
shall be characteristics of the
variety as regards shape,
appearance and
development. They must be
free of cracks and visible
green back. The following
slight defects may be there
provide these do not affect
the general appearance of
the produce, the quality, the
keeping quality and
presentation in the package:
slight superficial defects may
be there provided these do
not affect the general
appearance of the produce,
the quality, the keeping
quality and presentation in
the package.
- a slight defect in shape
and development;
10% by number or
weight of tomatoes not
satisfying the
requirements of the
grade, but meeting
those of Class II or,
exceptionally, coming
within the tolerances of
that grade.
- a slight defect in
colouring;
- slight skin defects;
- very slight bruises;
”Ribbed” tomatoes may
show :
- healed cracks not more
than 1 cm. long;
- no excessive
protuberances;
- small non lignified
unbilical scars;
- suberization of the stigma
upto 1 sq.cm;
- no more than one
headed scar;
- unbilical lignified scars
not greater than 1 sq.cm.
or linear lscar no longer;
than 2/3rd of the greatest
diameter of the fruit.
Class II Tomatoes shall be
reasonably firm flesh and
shall be character(but may
be slightly less firm than in
class I) and must not show
unhealed cracks.
Following defects may be
there provided the tomatoes
retain their essential
characteristics as regards
the quality, the keeping
quality and presentation.
- defects in shape,
development and
colouring;
- skin defects or bruises,
provided the fruit is not
seriously affected;
10% by number or
weight not satisfying
the requirements of
the grade but meeting
the minimum
requirements. In case
of trusses of tomatoes,
10 % by number or
weight of tomatoes
detached from the
stalk.
- healed cracks not more
than 3 cm. in length.
“Ribbed” tomatoes may
show:
- more pronounced
protuberances but
without being misshapen;
- one umbilicus;
- unbilical lignified scars
not greater than 2 sq.cm;
- fine blossom scar in
elongated form.
4. OTHER REQUIREMENTS:
(i) The contents of each package must be uniform and contain tomatoes of
same origin, variety and/or commercial type, quality and size.
(ii) The ripeness and colouring of tomatoes in "Extra class" and class I must be
uniform. In addition, the length of `Oblong' tomatoes must be
sufficiently uniform.
(iii) The tomatoes may be presented as follows:
(a) As individual tomatoes, with or without calyx and short stalks;
(b) As trusses of tomatoes, (in entire inflorescence or part of inflorescence).
Each inflorescence or part of inflorescence should comprise at least the
following number of tomatoes.
- 3 (2 if prepackaged) or
- in case of trusses of "Cherry" tomatoes 6 (4 if prepackaged).
(iv) The development and conditions of the tomatoes shall be such as to enable
them :
- to withstand transport and handling, and
- to arrive in satisfactory condition at place of destination.
5. PROVISIONS CONCERNING SIZING:-
Sizing is determined by the maximum diameter of the equatorial section in
accordance with following table. The provisions shall not apply to "cherry"
tomatoes. The minimum size is set at 35 mm for "round and "ribbed" tomatoes and
30 mm for "oblong" tomatoes:
_______________________________________________________
Size Code Diameter (in mm.)
Minimum* Maximum
_______________________________________________________
1 from 30 to 34
2 from 35 to 39
3 from 40 to 46
4 from 47 to 56
5 from 57 to 66
6 from 67 to 81
7 from 82 to 101
8 from 102
and over
________________________________________________________
* When the tomato in vertical position can pass through a circular opening of the
designated diameter.
@ —When the tomato in any position can pass through a circular opening of the
designated diameter.
(i) - Observance of the sizing scale is compulsory for "Extra class" and "class I"
tomatoes;
(ii) - The sizing scale shall not apply to trusses of tomatoes.
(iii) - For all classes:
10% by number or weight of tomatoes corresponding to the size immediately
above or below that indicated on the package with a minimum of
33 mm. for "round" and "ribbed" tomatoes and 28 mm. for "Oblong" tomatoes.
6. PROVISIONS CONCERNING COLOUR:
Following terms may be used in the description of the colour as an indication of the
storage and brightness of any lot and matured tomatoes.
- Mature green : when the tomatoes present a yellow colour;
- Green : when the surface of the tomato is completely green varying from light to
dark green.
- Breakers : when there is a definite break in colour from green to tannish - yellow,
pink or red on not more than 10% of the surface.
- Mottled : When yellow, rose or red are present in more than 10% but no more than
30% of the fruits.
- Rose : when rose or red colour are present in more than 30% but less than 60% of
the fruit(yellow is not included.
- Red : When more than 60% but no more than 90% of the fruits are rose or red
colour.
- Mature red : when more than 90% of the surface of the fruit shows red colour.
TOP
http://agmarknet.nic.in/fveggmrules04.htm#main
SCHEDULE - XV
GRADE DESIGNATION AND QUALITY OF BANANAS
1. Bananas shall be obtained from Varieties (cultivars) of Musa. spp. of the
Musaceae family.
2. MINIMUM REQUIREMENTS
(i) Bananas shall be :
(a) whole (taking the finger as the reference),
(b) firm,
(c) sound,
(d) clean, free of any visible foreign matter,
(e) free of bruisings,
(f) free of pests affecting the general appearance of produce,
(g) with the stalk intact, without bending, fungal damage or dessication,
(h) with pistils removed,
(i) free of malformation or abnormal curvature of the fingers,
(j) free of damage caused by low temperature,
(k) free of abnormal external moisture excluding condensation following
removal from cold storage and bananas packed under modified
atmosphere condition,
(l) free of any foreign smell and/or taste.
(ii) In addition, hands and clusters must include:
- a sufficient portion of the crown of normal colouring, sound and free of
fungal contamination,
- a cleanly cut crown, not bevelled or torn, with no stalk fragments.
(iii) Bananas shall comply with the residue levels of heavy metals, Pesticides and
other food safety parameters as laid down by the Codex Alimentarius
Commission for exports.
3. CRITERIA FOR GRADE DESIGNATION:
Grade
designation
Grade Requirements
Grade tolerances
1 2 4
Extra class Bananas shall be of superior
quality. They must be characteristics
of the variety and/or commercial
type. The fingers must be free of
defects, with the exception of very
slight superficial defects, provided
these do not affect the general
appearance of the produce, quality,
the keeping quality and presentation
in the package.
5% by number or weight of
bananas not satisfying the
requirements of the grade,
but meeting those of for
Class I grade or,
exceptionally, coming within
the tolerances for that class.
Class I Bananas shall be of good quality.
They must be characteristics of the
variety and/or commercial type. The
following slight defects of the
fingers, however, may be allowed,
provided these do not affect the
general appearance of the produce,
quality, the keeping quality and
presentation in the package.
- slight defects in shape and
colour;
- slight defects due to rubbing and
other superficial defects not
exceeding 2 sq.cm. of the total
surface area.
The defects must not affect the flesh
of the fruit.
10% number or weight of
bananas not satisfying the
requirements of the grade
class, but meeting those of
Class II or, exceptionally,
coming within the tolerances
of that grade.
Class II This includes bananas which do
not qualify for inclusion in the higher
classes, but satisfy the minimum
requirements. The following defects
may be there, provided the bananas
retain their essential characteristics
as regards the quality, the keeping
quality and presentation.
- defects in shape and colour
provided the product remains
the normal characteristics of
10% by number or weight of
bananas not satisfying the
requirements of the grade,
but meeting the minimum
requirements.
bananas;
- skin defects due to scrapping,
scabs, rubbing, blemishes or
other causes not exceeding 4
sq.cm. of the total surface area;
The defects must not affect the
flesh of the fruit.
4. OTHER REQUIREMENTS
(i) The development and condition of the bananas must be such as to enable them:
- to reach the appropriate stage of physiological maturity corresponding to the
particular characteristics of the variety,
- to withstand transport and handling, and
- to arrive in satisfactory condition at the place of destination in order to ripen
satisfactorily.
(ii) Bananas must be presented in hands and clusters (parts of hands) of atleast
four fingers. Bananas may also be presented as single finger.
- Clusters with no more than two missing fingers are allowed, provided the stalk is
not torn but clearly cut, without damage to the neighboring fingers.
- Not more than one cluster of three fingers with the same characteristics as the
other fruit in the package may be present per row.
5. PROVISIONS CONCERNING SIZING:-
(i) For the purposes of sizing bananas, the length of the fingers is determined
along the outside curve from the blossom end to the base of the pedicel where
the edible pulp ends and the diameter is defined as the thickness of a transverse
section between the lateral faces. The reference fruit for measurement of the
length and grade is:
- for hands, the median finger on the outer row of the hand,
- for clusters, the finger next to the cut section of the hand, on the outer row of
the cluster.
(ii) The minimum length should not be less than 14.0 cm and the minimum grade not
less than 2.7 cm.
(iii) For all classes, 10% by number or weight of bananas not satisfying the sizing
characteristics, upto a limit of 1 cm for the minimum length of 14 cm.
TOP
SCHEDULE - XVI
GRADE DESIGNATION AND QUALITY OF PLUMS
1. Plums shall be fruits obtained from Varieties (cultivars) of Prunus domestica L.
and Prunus salicina Lindl.
http://agmarknet.nic.in/fveggmrules04.htm#main
2. MINIMUM REQUIREMENTS-
(i) Plums shall be
(a) sound, fresh in appearance;
(b) clean, free of any visible foreign matter;
(c) intact;
(d) free from damage caused by pests;
(e) free of abnormal external moisture;
(f) free of any foreign smell and/or taste;
(g) carefully picked.
(ii) They shall comply with the residue level of heavy metals, pesticides and other
food safety parameters as laid down by the Codex Alimentarius Commission for
exports.
3. CRITERIA FOR GRADE DESIGNATION:
Grade
designation
Grade Requirements
Grade tolerances
1 2 4
Extra class Plums shall be of superior quality.
They must have the shape,
development and colouring typical
of the variety. They must be
- free from defects;
- practically covered by bloom,
according to the variety ;
- of firm flesh.
5% by number or weight of
Plums not satisfying the
requirements of the grade,
but meeting those of Class
I grade or, exceptionally,
coming within the tolerances
for that class.
Class I Plums must be of good quality.
They must be characteristics of the
variety and/or commercial type. The
following slight defects of the
fingers, however, may be allowed,
provided these do not affect the
general appearance of the produce,
quality, the keeping quality and
presentation in the package.
- a slight defect in shape,
- a slight defect in colouring;
- a slight defect in development;
- skin defects of elongated shape
that must not exceed in length
one-third of the maximum
diameter of the fruit;
- other skin defect, of which total
area affected must not exceed
5% of the whole surface;
- the stem may be damaged or
missing, provided that there is
no risk of the fruit rotting in
10% by number or weight of
Plums not satisfying the
requirements of the grade,
but meeting those of
Class II grade or,
exceptionally, coming within
the tolerances of that grade.
consequence.
Class II Plums which do not qualify for
inclusion in the higher classes, but
satisfy the minimum requirements.
- defects in shape, development
and colouring are allowed
provided that the plums retain
their characteristics.
- skin defects not liable to impair
the external appearance of the
fruits or its keeping quality are
allowed provided that they do
not exceed 10% of the whole
surface.
10% by number or weight of
Plums not satisfying the
requirements for the class
but meeting the minimum
requirements.
4. OTHER REQUIREMENTS:
Plums must be sufficiently developed and display satisfactory ripeness. The
development and condition of the Plums must be such as to enable them;
- to withstand transport and handling, and
- to arrive in satisfactory condition at the place of destination.
5. PROVISIONS CONCERNING SIZING:-
Sizing is determined by the maximum diameter of the equatorial section:
Large fruit Other varieties Mirabelles & damsons
varieties (Min.)(m.m) (Min.)(m.m) varieties(Min.)(m.m)
Extra class 40 28 20
Class I 35 28 20
Class II 30 25 17
Size tolerance: For all classes, 10% by number or weight deviating from the
minimum size or the size stated on the packages the deviation
not exceeding 3 mm. above or below.
TOP
SCHEDULE - XVII
GRADE DESIGNATION AND QUALITY OF PAPAYAS
http://agmarknet.nic.in/fveggmrules04.htm#main
1. Papayas shall be the fruit obtained from varieties of Carica Papaya L. of the
Caricaceae family;
2. MINIMUM REQUIREMENTS
(i) Papaya shall be
(a) whole,
(b) fresh in appearance,
(c) firm,
(d) sound, produce affected by rotting or deterioration, such as to make it unfit
for consumption is excluded,
(e) clean, free of any visible foreign matter,
(f) free of pests affecting the general appearance of the produce,
(g) free of damage caused by low and/or high temperature,
(h) free of abnormal external moisture, excluding condensation following
removal from cold storage,
(i) free of any foreign smell and/or taste,
(j) the peduncle, if present, should not exceed a length of 1 cm.
(ii) Papaya shall comply with the residue levels of heavy metals, pesticides and
other food safety parameters as laid down by the Codex Alimentarius
Commission for exports.
3. CRITERIA FOR GRADE DESIGNATION
Grade
designation
Grade Requirements
Grade tolerances
1 2 4
Extra class Papayas in this class must be of
superior quality. They must be
characteristic of the variety and /or
commercial type. They must be
free of defects, with the exception of
very slight superficial defects,
provided these do not affect the
general appearance of the produce,
the quality, the keeping quality and
presentation in the package.
5% by number or weight of
Papayas not satisfying the
requirements of the grade,
but meeting those of Class
I or, exceptionally, coming
within the tolerances of that
grade.
Class I Papayas in this class must be of
good quality. They must be
characteristics of the variety and/or
commercial type. The following
slight defects may be there,
provided these do not affect the
general appearance of the produce,
the quality, the keeping quality and
presentation in the package.
- a slight defect in shape,
10% by number or weight of
Papayas not satisfying the
requirements of the grade,
but meeting those of
Class II or, exceptionally,
coming within the tolerances
of that grade.
- slight skin defects (i.e.
mechanical bruising, sun spots
and/or latex burns). The total
area affected shall not exceed
10% of the total surface.
The defects, must not, in any case,
affect the pulp of the fruit.
Class II This class includes papayas which
do not qualify for inclusion in the
higher grades, but satisfy the
minimum requirements. The
following defects may be there,
provided the papayas retain their
essential characteristics as regards
the general appearance, the quality,
the keeping quality and
presentation.
- defects in shape,
- defects in colouring,
- skin defects(i.e. mechanical
bruising, sunspots and latex
burns). The total area affected
should not exceed 15% of the
total surface.
- Slight marks caused by pests.
The defects must not affect the pulp
of the fruit.
10% by number or weight of
Papayas not satisfying the
requirements of the grade but
meeting the minimum
requirements.
4. OTHER REQUIREMENTS
(i) The papayas must have been carefully picked and have reached an
appropriate degree of development and ripeness, account being taken of the
characteristics of the variety and/or commercial type and to the area in which
they are grown.
(ii) The development and condition of the papayas must be such as to enable
them;
- to withstand transport and handling, and
- to arrive in satisfactory condition at the place of destination.
5. PROVISIONS CONCERNING SIZING
Size is determined by the weight of the fruit with a minimum weight of 200 gm.
in accordance with the following table.
__________________________________________
Size Code Weight
(in grams)
__________________________________________
A 200 - 300
B 301 - 400
C 401 - 500
D 501 - 600
E 601 - 700
F 701 - 800
G 801 - 1100
H 1101 - 1500
I 1501 - 2000
J
>2001
______________________________________________
SIZE TOLERANCES:
For all grades, 10% by number or weight of papayas corresponding to the size
immediately above and/or below that indicated on the package, with a
minimum of 190 gm. for those papayas packed in the smallest size range.
TOP
SCHEDULE - XVIII
http://agmarknet.nic.in/fveggmrules04.htm#main
GRADE DESIGNATION AND QUALITY OF GARLIC
1. Garlic shall be obtained from Varieties (cultivars) Allium sativum L. They may be
(1) fresh, (2) semidry or (3) dry.
2. MINIMUM REQUIREMENTS-
(i) Garlic bulbs shall be
(a) sound, fresh in appearance;
(b) clean, free of any visible foreign matter;
(c) firm;
(d) free from damage caused by pests;
(e) free from damage caused by frost or sun;
(f) free from externally visible sprouts;
(g) free of abnormal external moisture;
(h) free of any foreign smell and/or taste;
(ii) They shall comply with the residue level of heavy metals, pesticides and other
food safety parameters as laid down by the Codex Alimentarius Commission
for exports.
Foot note : (1) `Fresh garlic' means produce with a `green' stem and with the outer
skin of the bulb still fresh.
(2) `Semi-dry garlic' means produce with the stem and the outer skin of
the bulb not completely dry.
(3) `Dry garlic' means produce in which the stem, the outer skin of the
bulb and the skin surrounding each clove are completely dry.
3. CRITERIA FOR GRADE DESIGNATION:
Grade
designation
Grade Requirements
Grade tolerances
1 2 4
Extra class Garlic shall be of superior quality.
They shall be characteristic of the
variety and /or commercial type.
The bulbs shall be :
- intact;
- regular in shape;
- properly cleaned.
5% by weight of Garlic not
satisfying the requirements of
the grade, but meeting those
of Class I grade or,
exceptionally, coming within
the tolerances of that grade.
They must be free of defects, with
the exception of very slight
superficial blemishes, provided
these do not affect the general
appearance of the produce, the
quality, the keeping quality and
presentation the package.
The cloves must be compact;
The roots of dry garlic must be cut
off flush with the bulb.
Class I Garlic shall be of good quality.
They shall be characteristics of the
variety and/or commercial type.
The bulbs shall be :
- intact;
- of fairly regular shape
The following slight defects,
however, may be allowed provided
these do not affect the general
appearance of the produce, the
quality, the keeping quality and
presentation in the package.
- slight tears in the outer skin
of the bulb;
cloves must be reasonably
compact.
10% by weight of Garlic
not satisfying the
requirements of the grade,
but meeting those of
Class II or, exceptionally,
coming within the tolerances
of that grade.
Class II Garlic which do not qualify for
inclusion in the higher grade, but
satisfy the minimum requirements.
The following defects may be
allowed, provided the garlic retain
its essential characteristics as
regards the quality, the keeping
quality and presentation.
- tears in the outer skin or missing
parts of the outer skin of the
bulb;
- healed injuries;
- slight bruises;
- irregular shape;
- upto three cloves missing.
10% by weight of Garlic
not satisfying the
requirements of the grade but
meeting the minimum
requirements.
4. OTHER REQUIREMENTS:
(I) The development and condition of the garlic must be such as to enable it to:
- withstand transport and handling, and
- arrive in satisfactory condition at the place of destination.
(II) Garlic must be presented as follows:
(i) loose in the package, with cut stems, the length of the stem not to exceed:
- 10 cm. in the case of fresh and semi-dry garlic,
- 3 cm. in the case of dry garlic;
(ii) in bunches by:
- number of bulbs;
- net weight.
The stems must be evened off;
(iii) in the case of dry and semi-dry garlic only, in strings by:
- number of bulbs, there being at lest six bulbs per string;
- net weight.
In the case of presentation in bunches or strings, each package must have uniform
characteristics (number of bulbs or net weight).
Irrespective of the type of presentation, the stems must be cut cleanly, as must roots
in the case of dry garlic classified in the `Extra' class.
(III) Package shall be marked `fresh garlic', `semi-dry garlic' or `dry garlic'.
5. PROVISIONS CONCERNING SIZING:
(I) Size is determined by the maximum diameter of the equatorial section.
(i) The minimum diameter shall be at 45 mm for garlic classified in the `Extra'
Class and 30 mm for garlic classified in Classes I and II.
(ii) For garlic presented loosee - with cut stems - or in bunches, the difference in
diameter between the smallest and the largest bulb in the same package
may not exceeed:
- 15 mm where the diameter of the smallest bulb is less than 40 mm;
- 20 mm where the diameter of the smallest bulb is 40 mm or more.
(II) Size tolerances: For all grades: 10% by weight of bulbs not satisfying the
requirements as regards sizing and the size indicated but
conforming to the size immediately above and/or below that
specifieed. Within this tolerances, not more than 3% of
bulbs may have a diameter smaller than the specified
minimum but not less than 25 mm.
(III) Garlic bulb without clove may have minimum diameter of 20 mm for Extra class
and 15 mm for Class I and Class II.
TOP
SCHEDULE - XIX
GRADE DESIGNATION AND QUALITY OF ONIONS
http://agmarknet.nic.in/fveggmrules04.htm#main
1. Onions shall be obtained from Varieties (cultivars) Allium Cepa L.
2. MINIMUM REQUIREMENTS-
(i) Onion shall be
(a) intact,
(b) sound, produce affected by rotting or deterioration such as to
make it unfit for consumption is excluded,
(c) clean, free from any visible foreign matter,
(d) free from damage caused by frost;
(e) sufficiently dry for the intended use(in the case of onions for storing, at least
the two first outer skins and the stem must be fully dried)
(f) without hollow or tough stems;
(g) practically free from pests;
(h) practically free from damage caused by pests;
(i) free of all abnormal external moisture;
(j) free of any foreign smell and/or taste.
The stems must be twisted or clean cut and must not exceed 6 cm in length (except
for stringed onions).
(ii) They shall comply with the residue level of heavy metals, pesticides and other
food safety parameters as laid down by the Codex Alimentarius Commission
for exports.
3. CRITERIA FOR GRADE DESIGNATION:
Grade
designation
Grade Requirements
Grade tolerances
1 2 4
Extra class Onion shall be of superior quality.
They shall be characteristic of the
variety and /or commercial type.
The bulbs shall be :
- firm and compact;
- unsprouted (free from externally
5% by number or weight of
onion not satisfying the
requirements of the grade,
but meeting those of Class I
grade or, exceptionally,
coming within the tolerances
of that grade.
visible shoots);
- properly cleaned;
- free from swelling caused by
abnormal development;
- free of root tufts, however,
onions harvested before
complete maturity, root tufts are
allowed.
They shall be free of defects, with
the exception of very slight
superficial blemishes, provided
these do not affect the general
appearance of the produce, the
quality, the keeping quality and
presentation in the package.
Class I Onion shall be of good quality.
They shall be characteristics of the
variety and/or commercial type.
The bulbs shall be :
- firm and compact;
- unsprouted (free from externally
visible shoots);
- free from swelling caused by
abnormal development;
- free of root tufts, however,
onions harvested before
complete maturity, root tufts are
allowed.
The following slight defects,
however, may be allowed provided,
these do not affect the general
appearance of the produce, the
10% by number or weight of
onion not satisfying the
requirements of the grade,
but meeting those of
Class II grade or,
exceptionally, coming within
the tolerances of that grade.
quality, the keeping quality and
presentation in the package.
- a slight defect in shape;
- a slight defect in colouring;
- light staining which does not
affect the last dried skin
protecting the flesh, provided it
does not cover more than one-
fifth of the bulb’s surface.
- Superficial cracks in and
absence of part of the outer
skins, provided the flesh is
protected.
Class II Onion which do not qualify for
inclusion in the higher grade, but
satisfy the minimum requirements.
They shall be reasonably firm. The
following defects may be allowed,
provided the onion retain their
essential characteristics as regards
the quality, the keeping quality and
presentation.
- defects in shape;
- defects in colouring;
- early signs of shoot growth
visible from outside (not more
than 10% by number or weight
per unit of presentation);
- traces of rubbing;
- slight marking caused by
parasites or disease;
- small healed cracks;
- slight bruising, healed, unlikely
10% by number or weight of
onion not satisfying the
requirements for the grade
but meeting the minimum
requirements.
to impair keeping qualities;
- root tufts;
- stains which do not affect the
last dried skin protecting the
flesh provided they do not cover
more than half the bulb’s
surface;
- cracks in the outer skins and the
absence of a part of the
outerskins from not more than
half of the bulbs’s surface;
- cracks in the outer skins and the
absence of a part of the
outerskins from not more than
one-third of the bulb’s surface,
provided the flesh is not
damaged.
4. OTHER REQUIREMENTS:
(I) The development and condition of the onion must be such as to enable them to:
- withstand transport and handling, and
- arrive in satisfactory condition at the place of destination.
(II) Onions must be presented as follows:
- arranged in layers;
- loose in the package (including in bulk bins);
- in strings:
either of a certain number of bulbs, in which case the strings must contain at
least six onions(with fully dried stems); or of a certain net weight.
For stringed onions, the characteristics of the strings in any one package(number of
bulbs or net weight) must be uniform.
5. PROVISIONS CONCERNING SIZING:
(I) Size is determined by the maximum diameter of the equatorial section in
accordance with the following table.
________________________________________________________
Size code Diameter Difference between
(in mm.) the diameter of the
smallest and largest
onion in the same package
(in mm.)
__________________________________________________________
A 10-20
5
B 21-40
15
C 41-70
20
D 71 and above
30
_____________________________________________________________
The minimum diameter is 10mm.
(II) Size tolerances: For all grades, 10% by weight of onions not satisfying the size
identified, but with a diameter of no more than 20% below
or above it.
(P.K.AGARWAL)
Joint Secretary
(Agricultural Marketing)
File No.:
18011/2/2003-M.II
TOP
http://agmarknet.nic.in/fveggmrules04.htm#main
Previous and next
All provisions of Fruits and Vegetables Grading and Marking Rules, 2004
Questions people ask
Is rule 9 of Fruits and Vegetables Grading and Marking Rules, 2004 still in force?
No repeal of Fruits and Vegetables Grading and Marking Rules, 2004 is recorded.