LawGrids logoLAWGRIDS.ORG

Rule 50, Atomic Energy (Factories) Rules, 1996: METHODS OF WORK

Atomic Energy (Factories) Rules, 1996 - Rule 50

Text of rule 50

METHODS OF WORK

50. METHODS OF WORK.- No process or work shall be carried in any factory in such a manner as to cause risk of bodily injury. Schedule for Hand Tools & Portable Power Tools is given Atomic Energy Factory Rules, 1996 80 Rule 50(Sch.) below. SCHEDULE HAND TOOLS & PORTABLE POWER TOOLS 1. Hand tools:- (a) Definition: Hand tool means any tool which is used without any external motive power. (b) Hand tools shall be of good quality materials, conforming to relevant BIS standards and shall be used only for the job it is designed for. Non sparking tools such as that made of Beryllium Copper alloy shall be used for working in explosive areas. (c) Workers shall be trained & instructed for proper use of tools such as files, hammers, hacksaws etc. (d) Proper tool bags shall be provided to workers to carry the tools and not leaving them on floors, passages etc. (e) Protective equipments such as gloves, goggles etc. shall be provided to and worn by the workers. (f) The tools shall be inspected regularly, repaired and maintained. 2. Portable Power Tools.- (a) Definition: Portable Power Tool means a tool powered by electric or pneumatic power, operated by a single operator and which is transportable from place to place. (b) Portable power tools shall conform to the relevant BIS standards and shall be used for the job it is designed for. Starting switches shall be located at such places where accidental starting cannot take place. (c) Electrically operated tools shall be used only with 3 core cable with proper earthing provided. This should be checked before use. (d) Electrically operated tools shall not be used where flammable vapours, gases or dusts are present, unless they are specially designed for use in such environment. (e) Proper guards shall be provided for tools such as grinders, saws etc. and operators shall be provided with personal protective equipments wherever required. Atomic Energy Factory Rules, 1996 81 Rules 50(Sch.)-52 (f) In case of pneumatic tools a short chain shall be provided for attaching the air hose and tools housings securely to prevent it from whipping in case of breaking of the coupling. (g) Periodic inspection and maintenance shall be carried out for electrical insulation, earthing, integrity etc.

Previous and next

All provisions of Atomic Energy (Factories) Rules, 1996

Questions people ask

Is rule 50 of Atomic Energy (Factories) Rules, 1996 still in force?

No repeal of Atomic Energy (Factories) Rules, 1996 is recorded.