Rule 44, Atomic Energy (Factories) Rules, 1996: SAFETY ORGANISATION FOR THE FACTORY
Atomic Energy (Factories) Rules, 1996 - Rule 44
Text of rule 44
SAFETY ORGANISATION FOR THE FACTORY
44. SAFETY ORGANISATION FOR THE FACTORY.-
(1) General - Manager of the factory shall not rest satisfied with mere compliance with
sections & rules of various Acts & Rules. He shall promote health & safety in his factory
by enlisting cooperation of all the employees so that safety culture is created. Towards
this he shall appoint Factory level and section level Safety Committees. In addition the
corporate offices of the factories shall establish a safety and environmental control section
to liase with the Competent Authority and carry out safety audit.
(a) Factory Level Safety Committee:-This is the apex safety body of the factory. The
manager of the factory
Atomic Energy Factory Rules, 1996
69
Rule 44
shall be the Chairman of this committee with chief safety officer as member
secretary. All section heads and two representatives of workers with adequate
knowledge of health & safety at their works will be the members of this
committee. The committee will meet once in three months & discuss the overall
aspects of health & safety and formulate programmes for promotion of safety &
health. The committee will also review the reports of Sectional Safety
Committees. The other duties will be the same as listed under Duties of Safety
Committees.
(b) Sectional Level Safety Committees:-The sectional head shall be the chairman of
this committee and one of the Safety Officers or his nominee shall be the member
secretary. An equal number of representatives of supervisors and workers from the
section with adequate knowledge of health & safety at their work shall be the
members of this committee. The committee shall meet once in a month and
discuss & analyse the safety performance of the section & set a goal for the next
month. The committee shall invite suggestions from employees & discuss these in
the meeting & take appropriate action. Suggestions & actions taken thereon shall
be put on the safety notice board.
(2) Duties of the Safety Committee.- The main job of the safety committee is to ensure health
& safety of all employees and the neighbourhood and towards this the committee shall-
(a) see that all the provisions of relevant Acts & Rules are conformed to.
(b) assess the potential hazards and dangerous occurrences at the work place and
examine the effectiveness of the Safety & Control measures.
(c) see that the processes for the manufacture of the main products and for the
disposal of gaseous, liquid & solid effluents are safe to ensure conformance to the
Environmental Protection Act, 1986.
(d) see that a well documented safety programme exists.
(e) see that a work permit system exists for handling of hazardous materials and
working-
(i) at hazardous locations such as at height;
(ii) near electrical installations and high pressure and enthalpy area;
(iii) with flammable and toxic materials; and
Atomic Energy Factory Rules, 1996
70
Rules 44-45
(iv) under high noise environment.
(f) see that the work environment and the neighbourhood is monitored for physical,
chemical & biological agents & see that the limits specified by the Acts &
Competent Authority are not exceeded any time.
(g) see that all employees are informed of the hazards involved in their work & are
provided with adequate protective equipments.
(h) see that a detailed schedule for periodic calibration & preventive maintenance of
all the machinery & equipments is being implemented.
(i) see that periodic medical examination of all employees is carried out to the extent
required as per the work environment.
(j) discuss accidents & dangerous occurrences at the work place and examine causes
of accidents & suggest to the management necessary improvements.
(k) organise safety circles in the unit for developing safety culture.
(l) investigate complaints received from any quarter about the risks or dangers.
(m) promote safety & health by organising accident prevention programs, campaigns,
& meets.
Previous and next
Questions people ask
Is rule 44 of Atomic Energy (Factories) Rules, 1996 still in force?
No repeal of Atomic Energy (Factories) Rules, 1996 is recorded.