LawGrids logoLAWGRIDS.ORG

Rule 7, Raw Meat (Chilled or Frozen) Grading and Marking Rules, 1991: Laboratory samples

Raw Meat (Chilled or Frozen) Grading and Marking Rules, 1991 - Rule 7

Text of rule 7

Laboratory samples

7. Laboratory samples :- (a) The sample obtained from the cubes or slices and other small cuts or mince packed in cartons shall be taken in the packed condition (polythene bags) i.e as offered for inspection. The polythene bags shall not be opened and shall be repacked in poly packs and sealed. A code slip indicating the code, date of sampling, type and temperature of meat at the time of sampling shall be put in the outer poly-pack. (b) From individual poly packs draw at random 3 poly pack from different parts of the same container. (c) Carcass Selection : The samples from the carcasses or quarters shall be taken from back muscles shoulders, eye muscles, hind quarters and care shall be taken that the whole thickness of muscle is covered in the sample and from each part not exceeding 100 gms. Sterilized samples or core bore tubes shall be used for obtaining the samples. Samples from thick muscles; on long bones shall be taken from the deepest part of the muscle adjoining bone. (b) The samples obtained from stockinet packs or large chunks or cuts shall be packed in clean sterile polythene bags or Aluminum bottles. The samples shall not be touched by hand and shall be handled only with the help of sterile forceps. The poly pack shall be evacuated of air, by pressing and squeezing between the palms and sealed, Sealed polythene bags or Aluminum bottles shall be repacked in another poly pack and heat sealed. 5. The total sample collected should be divided into three equal parts. A minimum quantity of 500g. has to be examined in the premises where lot is offered, equal quantity shall be sent to the laboratory for analysis and the same size sample shall be handed over to the manufacturer who offers the lot. (c) A code slip indicating date of sampling, type and temperature of meat at the time of sampling shall put 11 in the duplicate and - triplicate samples also and sealed. 8. Transportation of sample: The laboratory samples shall be kept in thermoceale insulated, pre-cooled ice containers with sufficient ice and transported within- 24 hours to the analytical laboratory. The laboratory in turn shall declare the result within a week's time from the receipt of the sample. The minimum weight of the sample should be 500 gms. The laboratory shall analyze the sample for: (a) Total plate count at 37 0C (b) Escherichia coli, and (c)Salmonella. SCHEDULE VI Minimum requirements for an Abattoir which is not conforming to IS: 4393-1979 and as amended from time to time. I. Layout The abattoir shall have the following essential facilities: (a) Resting place for animals before slaughter (b) Adequate facilities for ante-mortem inspection. (c) Flaying dressing and washing of the carcasses (d) Inspection of meat (post-mortem inspection) and disposal of meat unfit for human consumption. (e) Adequate water supply. II. Units in an Abattoir. The Abattoir shall have the following units. (a) Lairages (b) Slaughter Hall. III. Slaughter Hall Separate provisions, wherever required, shall be made in an abattoir for slaughtering, dressing and processing of: (a) Sheep and Goats (HALAL) (b) Sheep and Goats (JHATKA) (c) Sheep and Goats (JEWISH) (d) Large animals (e) Separate space shall be provided for stunning (wherever applicable), bleeding and dressing of carcasses. IV. Civil Construction: Ante-mortem and pen area: The area should be paved with impervious material such as concrete, bricks, pitched hearing, bone type and non-slippery and suitable to stand wear and tear and corrosion with suitable drainage facilities. The pen should preferably be covered. V. Vehicular Areas for trucks Concrete paved areas properly drained and extending at least 6 meters from building, leading decks or livestock platforms shall be provided at places where vehicles are loaded or unloaded. Pressure washing jets and disinfection facilities for trucks carrying animals should be provided. VI. Drainage All parts of floors where wet operations are conducted should be well drained. It is important that the floors slope uniformly to drains with not low spots which collect liquid. Floor drains should not be provided in freezer rooms or dry storage areas. VII. Lighting and ventilation. Un refrigerated work rooms should be provided with adequate, direct natural light and ventilation of ample artificial light and ventilation by mechanical means. Well distributed artificial lighting or good quality should be provided at all places were adequate natural light is not available or is insufficient. VIII. Supply of Water Constant and sufficient supply of potable water shall be available at adequate pressure throughout the premises. A constant supply of clean hot water shall be available in the slaughter hall and work rooms during working hours. Suitable facilities for washing of hands (including adequate supplies of hot and cold running water), nail brushes and soap or other detergent shall be provided for persons working in the abattoir, where not- potable water is used for fire control etc., it shall be carried in completely separate lines preferably identified by colour and with no cross-connection or back siphon age with lines carrying potable water. IX. Accessibility for cleaning and maintenance All parts of the products zone shall be readily accessible to sight and reach for cleaning and inspection. X. Non-acceptable Materials The following materials shall not be used in abattoir : (a) Copper and its alloys in equipment used for edible products; (b) Cadmium in any form in equipment handling edible products; (c) Equipment with painted surface in product zone; (d) Enamel containers or equipment is not desirable, and (e)Lead. 12 SCHEDULE VII Grade designation mark to be applied : Raw Meat (Chilled or Frozen) The grade designated mark to be applied to package of raw meat (Chilled or frozen) shall have the following design:- Serial No. (a) Type --- Buffalo beaf /Calf meat/Mutton/ Chevon/ Keema. (b) Grade .......................................................................................................................................................... (c) Net weight ........................................................................................................................................................ (d) Gross weight.................................................................................................................................................. (e) Date of packing .............................................................................................................................................. (f) Date of Inspection ........................................................................................................................................... (g) C.A. No. ........................................................................................................................................................ (h) Name and address of meat processing unit ....................................................................................................... MAP OF INDIA Serial No. Signature of the Inspecting Officer NOTE : Principal rules were published in the Gazette of India Part-II, Section 3 (ii) dt. 11-10-91 vide S.O .681 (E) dt. 10-10-91 13 SCHEDULE I SCHEDULE VII SCHEDULE VIII PARTICULARS OF BALES SCHEDULE IX RAW MEAT (CHILLED OR FROZEN) GRADING AND MARKING RULES SCHEDULE V SCHEDULE VI I.Layout III.Slaughter Hall V.Vehicular Areas for trucks VI.Drainage VIII.Supply of Water IX.Accessibility for cleaning and maintenance X.Non-acceptable Materials SCHEDULE VII

Previous and next

All provisions of Raw Meat (Chilled or Frozen) Grading and Marking Rules, 1991

Questions people ask

Is rule 7 of Raw Meat (Chilled or Frozen) Grading and Marking Rules, 1991 still in force?

No repeal of Raw Meat (Chilled or Frozen) Grading and Marking Rules, 1991 is recorded.