Rule 125, THE CENTRAL MOTOR VEHICLES RULES, 1989, (1-164): Safety belt, collapsible steering column, autodipper and padded dash boards
THE CENTRAL MOTOR VEHICLES RULES, 1989, (1-164) - Rule 125
Text of rule 125
Safety belt, collapsible steering column, autodipper and padded dash boards
340[125. Safety belt, collapsible steering column, autodipper and padded dash boards.—
341[(1)] One year from the date of commencement of the Central Motor Vehicles
(Amendment) Rules, 1993, the manufacturer of every motor vehicle other than motor
cycles and three-wheelers of engine capacity not exceeding 500 cc, shall equip every
such vehicle with a seat belt for the driver and for the person occupying the front seat.
342[(1-A) The manufacturer of every motor vehicle of M-l category shall equip every
motor vehicle with a seat belt for a person occupying the front facing rear seat:
Provided that the specifications of Safety Belt Assemblies and Safety Belt Anchorages in
motor vehicles shall conform to AIS: 005-2000 and AIS: 015-
2000 specifications, respectively, as may be amended from time to time, till such time as
corresponding Bureau of Indian Standards specifications are notified:
Provided further that on and after 1st October, 2002, the specification of Safety Belt
Assemblies and Safety Belt Anchorages in motor vehicles shall conform to AIS: 005-
2000 and AIS: 015-2000 specifications, respectively.]
(2) Six months from the date of commencement of the Central Motor Vehicles
(Amendment) Rules 1993, all motor vehicles shall be equipped with rear view mirror.
343[Provided that 344[on and from 1st May, 2003], the rear view mirror specifications and
installation requirements shall be as specified by AIS: 001-
340
R. 125 substituted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
341
R. 125 renumbered as sub-R. (1) thereof by G.S.R. 720(E), dated 10-9-2003 (w.e.f. 10-10-
2003).
342
Sub-R. (1-A) substituted by G.S.R. 400(E), dated 31 -5-2002 (w.e.f. 31-5-2002).
343
Inserted by G.S.R. 400(E), dated 31-5-2002 (w.e.f. 31-5-2002).
344
Substituted by G.S.R. 845(E), dated 27-12-2002, for "on and from 1st January, 2003" (w.e.f.
27-12-2002).
134
2001 and AIS: 002-2001 respectively, as may be amended from time to time, till such
time as corresponding Bureau of Indian Standards specifications are notified.]
345[* * *|
346[* * *]
347[(5) On and after 1st January, 2003, the size and specifications on seats, their
Anchorages and Head Restraints (excluding luggage retention) on M-l vehicle category
shall conform to A1S : 016-2000 specifications, as may be amended from time to time,
till such time as corresponding Bureau of Indian Standards specifications are notified.]
348[(6) On and from the 1st day of October, 2007, the seats, their anchorages and their
head restraints for M2, M3, Nl, N2 and N3 category of vehicles, shall be in accordance
with AIS:023:2005 as amended from time to time till the corresponding BIS
specifications are notified under the Bureau of Indian Standards Act, 1986 (63 of 1986).]
349[125-A. Safety belt, etc., for construction equipment vehicles.—One year from the date
of commencement of the Central Motor Vehicles (Sixth Amendment) Rules, 2000, the
manufacturer of every construction equipment vehicle other than an agriculture tractor
shall equip every such vehicle with a seat belt for the driver and for the person
occupying the front seat, and with a rear view mirror.]
350[125-B. Special requirements for transport vehicles that are driven on hills.—(1) On
and from the 1st day of October, 2006, such four wheeled transport vehicles as may be
notified by State Governments in the Official Gazette plying on such routes or areas in
hilly terrains shall be fitted with fog lamp, power steering, defogging and demisting
system and that the State Government would provide a lead time of six months for this
purpose.
(2) Anti-Lock Braking System shall be introduced in all M-2 category buses including
those plying on All India Tourist Permit on and from the 1st day of October, 2007 in hill
areas.
125-C. Body building and approval.—(1) On a date to be notified, the testing and
approval for body building of buses shall be accordance with AIS:052:2001 as amended
345 Sub-R. (3) omitted by G.S.R. 29(E), dated 15-1-1998 (w.e.f. 15-1-1998).
346 Sub-R. (4) omitted by G.S.R. 659(E), dated 12-9-2001 (w.e.f. 12-9-2001).
347 Inserted by G.S.R. 400(E),dated 31-5-2002 (w.e.f. 31-5-2002).
348 Sub-R. (6) inserted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 16-9-2005).
349 Inserted by G.S.R. 642(E), dated 28-7-2000 (w.e.f. 28-7-2000).
350 Rr. 125-B and 125-C inserted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 16-9-2005).
135
from time to time for vehicles mentioned therein, till the corresponding BIS specifications
are notified under the Bureau of Indian Standards Act, 1986 (63 of 1986).
(2) The testing and approval for the body building of school buses shall be iii accordance
with AIS:063:2005 as amended from time to time for vehicles mentioned therein, till the
corresponding BIS specifications are notified under the Bureau of Indian Standards Act,
1986 (63 of.1986).]
Previous and next
← Rule 124Safety standards of componentsRule 126 →Prototype of every motor vehicle to be subject to test
All provisions of THE CENTRAL MOTOR VEHICLES RULES, 1989, (1-164)
Questions people ask
Is rule 125 of THE CENTRAL MOTOR VEHICLES RULES, 1989, (1-164) still in force?
No repeal of the CENTRAL MOTOR VEHICLES RULES, 1989, (1-164) is recorded.